Water Resources Department Tender

Yearly Maintenance including Application of M.P. Grease to the movable components after properly cleaning of surface areas with kerosene or Diesel. (Application of grease to gears,pinions of end reduction units, bushes of position indicator ,trunnion bushes ,hinges and pins of electromagnetic braking system , guide rollers bushes , pins , equalizer plate pins, Guide Rollers & adjustment of Turn buckle threads etc. ),Tightening of all bolts, nuts & screws/Replacement of damaged bolts, nuts & screws as per requirement,Adjustment of spring tension in electromagnetic brake etc.,Checking of electrical switches contactors, wiring etc.Checking of Oil Level in gear boxes and topping up,Smearing of cadmium compound on wire ropes (Including jhulla, belt & consumables) which includes M.P. Grease-100kg,Gear oil-100 ltr,Diesel-50ltr,cardium compound-100ltr,cotton jute waste-25kg,tools and tackles-5set,Electrical hardwares such as 16 Gauge CR sheet, FN 63A With fuse link, Al,Busbar insulator, Indicator(R,Y,B) with MCB,Digital Volt Meter, Digital Ammeter, Push Button (Foreward/ Stop/ Reverse), H.R.C Fuse, MNX32 Contactor (L&T make), Addon Block(2NO+2NC), Indicator(On/Off), Over Load Relay MN2(14-23A) for D.O.L. Starter-5set, Electrodes, gas & other required part-250 nos,Spares part such as Nuts, Bolt, screws-100kg along with labour charges for 5 Nos Radial gates (size- 13.00 mtr x5 mtr), Hoist bridge & Walkway of Kuanaria Dam under Superintending Engineer, Nayagarh Irrigation Division, Nayagarh complete in all respects as per specifications and direction of Engineer-in-charge.

Labour charges for priming one coat of 40 micron thick with any approved primer (Epilux 610 primer Redoxide) to exterior surface of the gate components down stream side of gate, hoist bridge, platform, ladder, railing, walkway etc. including scaffolding above 4.60 mtr to any height as per specification of paint manufacturer and direction of the Engineer-in-charge( Labour only)

Labour charges for painting 2nd coat of 100 micron with any approved paint (i.e coaltar epoxy based paints to the down -stream area of the skinplate & vertical stifener, enamel paint to the Surface area for Horizontal Girders, end arm with bracing, trunnion brackets, tie beam, trunnion girder and Alluminium paint toSurface area for walkway & Railing,Hoist bridge etc.) component including scaffolding above 4.60 mtr to any height as per specification of paint manufactures and direction of the Engineer-in-charge( Labour only)