Water Resources Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Technical
Technical
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is "B" Class and "A" Class.
Bid Capacity
... View More
The bid capacity required in the given tender involves various components and formulas. For adjustments due to changes in rates of certain materials, the formulas are:
1. Adjustment for Local Materials (other than cement, steel, bitumen, and POL): VM = 0.85 x Pm/100 x R x (M- M0)/M0
2. Adjustment for Cement Component: Vc = 0.85 x Pc/100 x R x (C1-C0)/ C0
3. Adjustment for Steel Component: Vs = 0.85 x Ps/100 x R x (S1-S0)/ S0
4. Adjustment for Bitumen Component: Vb = 0.85 x Pb/100 x R x (B1-B0)/ B0 Additionally, the bid capacity is related to the Earnest Money Deposit (EMD) and the Initial Security Deposit, with specific percentages of the tender value. The bid capacity also involves the maximum annual value of work that a bidder can handle, although the exact value or formula to calculate this capacity is not specified. However, specific bid capacity requirements are mentioned as follows:
i. Below 5%, No Additional Performance Security
ii. From 5% and above and below 10%, 50% of (Difference between estimated cost put to tender and Bid Amount)
iii. From 10% and above, 150% of (Difference between estimated cost put to tender and Bid Amount) These details indicate the complexity of determining the bid capacity, which involves understanding various formulas and conditions related to the tender.
Technical Capacity
... View More
The required prior work experience for the bidder includes providing details of works completed in the last five years, with information such as total tendered cost of work, brief descriptions of works, and principal features and quantities of main items. Additionally, the bidder must provide details of works in hand, including percentage of physical completion and amount billed for the work completed. The required information includes: - Total tendered cost of work
- Percentage of physical completion
- Amount billed for the work completed
- Cost of work remaining to be executed
- Stipulated date of completion
- Anticipated date of completion However, specific values and percentages of similar works completed are not mentioned.
Costs
EMD
₹ 2,49,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_SCDBH_109717_16Tender No
e-Procurement Notice No.ACESIC-03/2024-25Tender Authority
Water Resources Department ViewPurchaser Address
-Website
http://tendersodisha.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60 Kg/sqm using mechanical means as per Clause 502 of MoSRT&H Specifications for Road & Bridge works (4th Revision) with all leads, lifts and delifts including cost, conveyance, cess but excluding GST and taxes of all materials including labours and hire charges required for the work, hire and running charges of machineries etc. all complete as per specification and direction of the Engineer-in-Charge.
15656.25
56
886143.75
... More
Providing and applying tack coat with bituminous emulsion (60/70) penetration grade using the emulsion pressure distributer @ 0.20 Kg per sqm on the prepared bituminous/granular surface cleaned properly with mechanical broom as per clause 503 of MoSRT & H Specification for Road & Bridge work (4th revision) with all leads, lifts and delifts including cost, conveyance, cess but excluding GST etc. including labours and hire charges required for the work, hire and running charges of machineries etc. all complete as per specification and direction of the Engineer-in-Charge.
15656.25
12
191006.25
... More
Providing laying 50 mm thick Bituminous Macadam with hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laid over previously prepared surface with hydrostatic paver finisher with sensor control to the required grade, level & alignment & rolling with smooth wheeled, vibratory & tandem rollers to achieve the desired compaction as per clause 504 of MoSRT&H specification for road and bridgeworks (4th revision) including cost conveyance royalty and cess but excluding GST of all materials and hire charges of machineries etc. complete as directed by the Engineer in charge.
782.81
8352
6538342.24
... More
Providing laying 25 mm thick Semi dense Bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laid over previously prepared surface with hydrostatic paver finisher with sensor control to the required grade, level & alignment & rolling with smooth wheeled, vibratory & tandem rollers to achieve the desired compaction as per clause 508 of MoSRT&H specification for road and bridgeworks (4th revision) including cost conveyance royalty and cess but excluding GST hire charges of machineries etc. complete as directed by the Engineer in charge.
391.4
10602
4149896.78
... More
Quarrying, collecting, supplying and stacking of good quality of moorum and sand in regular box heap size of 1.50m X 1.50m X 0.50m to be measured as one cum and admixing moorum and sand in (60 : 40) proportion and laying in sub-base of road in layers not exceeding 150 mm thick with all leads , lifts and delifts including cost, conveyance, royalty, cess but excluding GST required for the work , watering and consolidation with P.R.R., hire and running charges of machineries etc. Complete as per specification and direction of the Engineer-in-Charge.
375.75
1433
538637.63
... More
Fine dressing and Turfing to the slope of the road embankment with compaction dub grass transported by mechanical means with watering , all leads,lifts and delifts including cost conveyance, cess but excluding GST required for the work,etc. Complete as per specification and direction of the Engineer-in-Charge.
19050
28
546735
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%