Water Resources Department Tender

Collecting, conveying, stacking and labour for laying I.R.C.Gr.III metalling conforming to sieve analysis as per MOSRT&H specification using 22.4 mm to 53 mm size broken hard granite chips including watering, turfedging etc. consolidation with P.R.R.including cost, conveyance & royalty of all materials, labour charges, cess, tools & plants, hire & runing charges of all machineries, taxes (Excluding GST), rehandling of materials, if required, with all lead, lifts & de-lifts, all costs incidental to the work etc; complete as per specfication and direction of Engineer-in-Charge.

Cleaning the existing granular base surface including removal of binding materials and other foreign materials with wire brush and small picks ,sweeping with brooms or soft brushes and finally dusting with old gunny bags or compressed air to receive the bituminous road including cost, conveyance & royalty of all materials, labour charges, cess, tools & plants, hire & runing charges of all machineries, taxes (Excluding GST), rehandling of materials, if required, with all lead, lifts & de-lifts, all costs incidental to the work etc; complete as per specfication and direction of Engineer-in-Charge.

Providing and laying 20mm thick premix carpet using 0.23 cum of 13.2 mm to 5.6 mm size crusher broken hard granite chips free from weathered skin surface and excess of flat ,elongated, soft and disintegrated particles, dirt and other objectionable materials, with 12.70 kgs. of bitumen of penetration grade for 9.29 Sqm. Including all cost, conveyance, royalty and all taxes of all materials and labour charges for pre-stacking in regular box heaps of size (1.5 x 1.5 x 0.5) Mtr. to be measured as 1 cum., conveying from stacks feeding in to hot bitumen mixer, heating bitumen in to required temperature, conveying hot binder for pre-coating chips in required quantity to ensure through pre-coating, conveying pre-coated chips from the mixer and laying the same with hand packing to proper camber with all lead, lift and delift, consolidation with P.R.R.including cost, conveyance & royalty of all materials, labour charges, cess, tools & plants, hire & runing charges of all machineries, taxes (Excluding GST), rehandling of materials, if required, all costs incidental to the work etc; complete as per specfication and direction of Engineer-in-Charge.

Providing and laying 6mm thick pre-coated seal coat using 0.06 cum of 6.7 mm, size crusher broken hard granite chips of approved quality free from weathered skin surface and excess of flat ,elongated, soft and disintegrated particles, dirt and other objectionable materials, as per sieve analysis and 6.8 Kgs. Of bitumen for 10 Sqm. Including pre-stacking at approved stacking yard at work site to regular box heaps of size (1.5 x 1.5 x 0.5) Mtr. to be measured as 1 cum., conveying chips from stacking yard at work site, feeding into hot bitumen mixer, heating bitumen into the required temperature, conveying hot binder for pre-coating chips in required quantity to ensure through pre-coating, conveying pre-coated chips from the mixer and laying the same in proper position on the approved surface including hand packing to proper camber with all lead, lift and delift, consolidation with P.R.R. inclusive of hire and running charges of P.R.R.bitumen mixer tar boiler and all other T & P materials including cost, conveyance & royalty of all materials, labour charges, cess, tools & plants, hire & runing charges of all machineries, taxes (Excluding GST), rehandling of materials, if required, all costs incidental to the work etc; complete as per specfication and direction of Engineer-in-Charge.

Collecting, conveying, stacking of sand of approved quality and labour charges for blinding road surface with sand 6mm thick including cost, conveyance & royalty of all materials, labour charges, cess, tools & plants, hire & runing charges of all machineries, taxes (Excluding GST), rehandling of materials, if required, with all lead, lifts & de-lifts, all costs incidental to the work etc; complete as per specfication and direction of Engineer-in-Charge.

Collecting, conveying and stacking, labour charges for laying of gravel or moorum of approved quality including all cost, conveyance, royality taxes with consolidation with P.R.R. .including cost, conveyance & royalty of all materials, labour charges, cess, tools & plants, hire & runing charges of all machineries, taxes (Excluding GST), rehandling of materials, if required, with all lead, lifts & de-lifts, all costs incidental to the work etc; complete as per specfication and direction of Engineer-in-Charge. .

Dismantling and demolishing cement concrete at any height /level including stacking the useful materials for reuse and removing the debris clear out of work site with 1000 metre lead but all lifts and delifts including labour charges, cess tools & plants, taxes (Excluding GST), scaffolding if required, etc. complete as per specification and direction of the Engineer-in-charge.

Earth work in excavation of foundation in hard and gravelly soil including dressing and levelling the bed, breaking the clods to maximum 5 cm to 7 cm size and laying the excavated materials on the ear- marked place in layers not exceeding 300 mm in depth, rehandling of the earth, if requitred, with all lead, lifts & delifts, labour charges, cess, tools & plants, taxes (Excluding GST) etc; all complete as per specification & direction of Engineer-in-Charge.

Filling in foundation and plinth with approved quality of coarse sand, laying the sand in uniform thickness, watering and ramming including cost, conveyance & royalty of all materials, labour charges, cess, tools & plants, taxes (Excluding GST), rehandling of materials, if required, with all lead, lifts &de-lifts, all costs incidental to the work etc; complete as per specfication and direction of Engineer-in-Charge.

Providing and laying cement concrete M-15 grade using 40 mm and down graded size crushed granite coarse aggregates free from weathered skinned surface, mixing the concrete in concrete mixer, carrying & laying at any height/depth to proper line & grade, compacting with vibrators for proper compaction, curing, rehandling of materials, if requird, including cost, conveyance & royalty of all materials, labour charges, cess, tools & plants, hire & runing charges of concrete mixer & generator, taxes (Excluding GST), rehandling of materials, if required, with all lead, lift & de-lifts, all costs incidental to the work etc; complete as per specfication and direction of Engineer-in-Charge.

Providing and laying cement concrete M-20 grade using 20 mm and down graded size crushed granite coarse aggregates free from weathered skinned surface, mixing the concrete in concrete mixer, carrying & laying at any height/depth to proper line & grade, compacting with vibrators for proper compaction, curing, rehandling of materials, if requird, including cost, conveyance & royalty of all materials, labour charges, cess, tools & plants, hire & runing charges of concrete mixer & generator, taxes (Excluding GST), rehandling of materials, if required, with all lead, lifts & de-lifts, all costs incidental to the work etc; complete as per specfication and direction of Engineer-in-Charge.

Providing rigid & smooth centring and shuttering for cement concrete works of foundation, footings, bases of columns, mass concrete etc; and the like at any height/level, including false works and dismantling them after specified period of casting including cost & conveyance of all materials, labour charges, cess, tools & plants, taxes (Excluding GST), rehandling of materials, if required, with all lead, lift & de-lifts, all costs incidental to the work etc; complete as per specfication and direction of Engineer-in-Charge

Supplying, fitting & placing Thermo-mechanical treated (TMT) steel reinforcement bars for R.C.C. works including cutting, bending, binding, straightening, tying the grills & placing in position with cost & conveyance of all materials (including binding wire 18 to 20 gauge), labour charges, cess, tools & plants, taxes (Excluding GST) and all lead, lifts & de-lifts, all costs incidental to the work etc; complete as per specification & direction of the Engineer-in-Charge.

Laying and fixing in position of R.C.C. spun pipes having diameter 100mm / 150mm as per site requirements with collars jointed with cement mortar 1:3 complete including cost, conveyance & royalty of all materials, labour charges, cess, tools & plants, taxes (Excluding GST), rehandling of materials, if required, with all lead, lift & de-lifts, all costs incidental to the work etc; complete as per specfication and direction of Engineer-in-Charge.