Water Resources Department Tender

Earth work in excavation of foundation in all kinds of soil including stoney earth and gravel mixed with boulders not exceeding 0.014 cum in volume, D.I.Rock & slushy soil with all leads, lifts, delifts including dressing and leveling the bed to design section and disposal of excavated materials for filling in canal bank portion with all leads, lifts and delifts including dewatering, shoring, shuttering and propping of bullah piles and construction of coffer dam if required, bailing out water with all cost, conveyance, labour and cess and , taxes of all materials excluding GST, etc. complete as per the approved drawing, design, specification and direction of the Engineer-in-Charge.

Filling and spreading of sand in foundation and plinth with good quality of sand of approved quality free from any objectionable materials with al leads, lifts and delifts etc including well watered and rammed as per drawing & design by manual / mechanical means with cost, conveyance, royalty, cess, alltaxes of all materials, labour, t&P, excluding GST, etc complete as per specification and direction of the Engineer in charge.

Supplying,Providing,mixing and spreading good quality laterite moorum and sand admixture (in 60:40 ratio for CNS layer ) of approved quality from approved quarry including collecting at work site ,watering,ramming and rolling with HRR with cost, Conveyance, Taxes, Royalty of moorum and sand , all labour charges, T&P charges,hire and running charges of HRR etc. excluding GST. Complete in all respects with with all cost, conveyance, taxes, royality,all labour, T&P and cess excluding GST etc. and as per the approved drawing, design, specification and direction of the Engineer-in-Charge.

Cement concrete of design mix of M15 grade having specified characteristic compressive strength of 15N/mm2 in design mix with minimum quantity of cement as specified in I.S. code of 150 mm cube at 28 days curing after mixing & tests conducted in accordance with relevant clauses of I.S. – 516 using crusher broken hard granite coarse aggregate 40mm down graded and proportion as specified in I.S. 456 code and subject to mix design in conformity to the grading and proportion of different materials of concrete in structures as specified in the relevant codes of approved quantity obtained from approved quarry of tested and approved quality free from weathered skin surface and any other deleterious materials, uniform colour & texture with mixing concrete in concrete mixer, conveying the same by transit mixers and placing in position for structures etc. with all leads, lifts and delifts including cost, carriage, royalties, taxes of all materials excluding GST, but including cess and quality control test cost of all materials, dewatering, mixing and vibrating by mechanical means placing in proper place and providing grooves or beads wherever necessary including cost, carriage of water, curing , T&P, hire & running charges of all machineries, labour and supervision charges including mobilization and demobilization and working of machineries etc with cost of construction and maintenance of coffer dam and diversion arrangement and removal required etc complete as per the approved drawing, design, specification and direction of the Engineer-in-Charge.

Cement concrete of design mix of M15 grade having specified characteristic compressive strength of 15N/mm2 in design mix with minimum quantity of cement as specified in I.S. code of 150 mm cube at 28 days curing after mixing & tests conducted in accordance with relevant clauses of I.S. – 516 using crusher broken hard granite coarse aggregate 20mm down graded and proportion as specified in I.S. 456 code and subject to mix design in conformity to the grading and proportion of different materials of concrete in structures as specified in the relevant codes of approved quantity obtained from approved quarry of tested and approved quality free from weathered skin surface and any other deleterious materials, uniform colour & texture with mixing concrete in concrete mixer, conveying the same by transit mixers and placing in position for structures etc. with all leads, lifts and delifts including cost, carriage, royalties, taxes of all materials excluding GST, but including cess and quality control test cost of all materials, dewatering, mixing and vibrating by mechanical means placing in proper place and providing grooves or beads wherever necessary including cost, carriage of water, curing , T&P, hire & running charges of all machineries, labour and supervision charges including mobilization and demobilization and working of machineries etc with cost of construction and maintenance of coffer dam and diversion arrangement and removal required etc complete as per the approved drawing, design, specification and direction of the Engineer-in-Charge.

Reinforced Cement concrete of design mix of M20 grade using 20 mm and down graded crusher broken hard granite coarse aggregates,having specified characteristic compressive strength of 20N/mm2 in design mix with minimum quantity of cement as specified in I.S. code of 150 mm cube at 28 days curing after mixing & tests conducted in accordance with relevant clauses of I.S. – 516 using crusher broken hard granite coarse aggregate 20mm down graded and proportion as specified in I.S. 456 code and subject to mix design in conformity to the grading and proportion of different materials of concrete in structures as specified in the relevant codes of approved quantity obtained from approved quarry and using the minimum quantity of cement about 3.47 Qntl per cum (as per nominal mix)of tested and approved quality free from weathered skin surface and any other deleterious materials, uniform colour & texture with all leads, lifts and delifts including cost, carriage, royalties, taxes of all materials excluding GST, but including cess and quality control test cost of all materials, dewatering, mixing and vibrating by mechanical means placing in proper place and providing grooves or beads wherever necessary including cost, carriage of water, curing , T&P, hire & running charges of all machineries, labour and supervision charges including mobilization and demobilization and working of machineries etc with cost of construction and maintenance of coffer dam and diversion arrangement and removal required in complete as per approved drawing , specification and direction of the Engineer in charge.

Labour charges for straightening, coiled or bend up M.S. or HYSD bars confirming to grade fe-250 or fe-415 of tested and approved quality, cutting, bending, lapping, slitting , welding etc and confirming I.S. Specification and jointing if necessary by lapping and tying the grills and placing in position in ties chairs and spaces as required for fabrication and fixing of reinforcement for RCC works as per the approved design with all leads and lifts from bending yard to placement spot including all cost and conveyance of M.S. or tor-steel bars of SAIL / TATA / approved make and binding wire of 18 to 20 gauges etc complete (Weight of binding wire has not been considered for payment. Standard co-efficient of different sizes of the steel shall be considered and welding and lapping shall confirming to relevant clauses of I.S. code) including cost of all labours, T&P and supervision charges, taxes of all materials excluding GST but including cess etc complete as per design, drawing and direction of the Engineer-In-charge.

Providing formwork for concrete with F1 finish for both face of c.c.wall, guard wall & structures etc, exposed & unexposed surface of foundation, block joints etc with steel shutters rigidly fixed and removal of forms and making good to the surfaces where necessary complete with all labour, materials, supervision charges, conveyance and T&P, cess & taxes of all materials excluding GST, etc complete as per the approved drawing, design, specification and direction of the Engineer-in-Charge.

Filling foundation and plinth with good quality of excavated earth available from foundation excavation with well watered and rammed including all cost, conveyance, cess and taxes of materials excluding GST, labour charges and T&P etc complete with all leads, lifts, delifts etc as per specification and direction of the Engineer in charge.

20 mm thick cement plaster in cement mortar (1:4) over stone /brick masonry including racking out joints with cost, conveyance and all leads and lifts, royalties, cess, taxes of all materials excluding GST but including labour, T&P etc Complete in all respect as per drawing, design, specification and direction of the Engineer- in- charge

Providing weep holes in plain / reinforced concrete walls, abutment , wing wall / return wall / toe wall / retaining wall etc with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V: 20 H towards drawing face complete as per approved drawing and technical specification including removal of clogged materials for weep holes and providing adequate filter materials at the face of the A.C. pipes with cost, carriage, royalties , cess, taxes of all materials, T&P , labour and supervision charges etc complete as per direction of the Engineer-in-charge & as per approved drawing, design and specification.

Fine dressing of earth work in slopes including filling of rain cuts and slips with selected earth duly compacted and trimmed to the required profile and turfing the surface with compact dub grass sods 8cm to 10cm thick including collection & supplying the same, loading, unloading and coveyance charges, cess and other taxes of all materials excluding GST with all leads, lifts and delifts including laying and trimming to form a level and compact surface in line with the slopes and grade of the earth embankment section of river including watering until the green growth of grass including mobilisation and demobilisation complete as per design, drawing and specification and direction of the Engineer-in-Charge (Measurement will be taken after full survival of turf)

Supply and fixing bituminous expansion joint board of 12 mm thick of ISI standard in lining joints including bredzing/ araldite with cost, conveyance, royalty & taxes etc of all materials excluding GST, all labour, supervision charges , T&P, cess etc complete as directed by the Engineer in charge.