Water Resources Department Tender

Earthwork in excavation, loading, unloading and carriage by mechanical means in all kind of soil including stoney earth, gravel and moorum etc. interspread with boulders up to1/2 cum size for base stripping including dressing and leveling the bed to design section and disposal of unutilized excavated soil away from work site in the specified spoil yard with all leads, lifts and delifts, including dewatering, trimming of slopes and bed with all labour & machineries required for the work, cess and taxes but excluding GST etc. complete in all respect as per the approved drawing, specification and direction of the Engineer-in-Charge. (Measurement is to be taken on the finished level section).

Rough stone dry packing in aprons and revetments to designed thickness and slope using 15cm to 30cm size hard broken stone of approved quality from approved quarry free from weathered skin and any other deleterious materials including filling the interstices with small stones, spalls etc and wedging with hammer and placing the surface to proper line and level, fixing key stones including dewatering, if any with all cost, conveyance, royalty, additional charges, DMF, EMF & taxes on all materials and machineries excluding GST but including quality control charges & cess with all leads, lifts and delifts and all labour required for the work etc. complete as per approved drawing, specification and direction of the Engineer in charge.

Providing & making Gabion structure of size (2x0.5x1)m with Mechanically Woven Double Twisted Hexagonal shaped wire mesh Gabion Boxes as per IS 16014:2013, MoRT&H’s 5th revision clause 2500, of required size, mesh type 10x12(D=100mm with tolerance of ±2%), Zinc+Polymer coated, Mesh wire Diameter 2.7/3.7 mm (ID/OD), mechanically edged/ selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm (ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm with cost, conveyance, royalty, additional charges, DMF, EMF & taxes on all materials and machineries excluding GST but including quality control charges & cess with all leads, lifts and delifts and all labour required for the work etc. complete in all respect as per approved drawing, detailed specification conforming to codes in vogue & as per directions of Engineer-in-Charge.