Water Resources Department Tender

Shutter Size- (1.5m (H) x 1.2m (W))- 5 Nos. Supply of structural steel materials of different section and sizes (IS:2062), stainless steel flats of different section and sizes (04 Cr 19 Ni of IS :1570 (Part-5), fabrication including machining and assembly of second stage embedded parts consisting of sill beam, sill beam ss seat, side seal ss seat, guide side wall plates, U/S & D/S side wall plates etc., vertical lift gate consisting of skin plate, horizontal girders, end vertical girders, seal flats, side seal mounting & clamping, bottom seal mounting & clamping, pade base etc., screw hoisting arrangements consisting of cross beam, CI gear box base plate and anchor bars of total weight around 3052.545 kg for 5 Nos. of monoblock gate as per specification and approved drawings with all accessories including machinery, fixtures, labour, cutting, welding, drilling, boring, cleaning, finishing, consumables with lead & lifts all complete as per instruction of Engineer-in-charge.

Supply of following bought out materials for 5nos. of monoblock gates- CSK bolts,Hex bolts, screws, nuts, washers etc.=50kg, M.S Nut internal square threaded 2TPI to fit with 63mm dia. screw rod=5Nos., M.S Bush to guide 63mm dia. Screw rod=5Nos., Bronze pad LTB-1 of size 80mm x30mm x12mm= 20 Nos.,Bottom rubber seal mould neoprene of size 75mmx10mm confirming to IS-11855=5.30m, Side rubber seal mould neoprene Ø32mmx10mm- 80mm width confirming to IS-11855=14.5m, Ø20 MS Anchor bars- 400mm long with double nuts & washers=80 Nos., Grease MP3=25kg, (Nut type screw gear box assembly suitably square threaded for 63mm dia screw rod all inclusive of cost of materials, cost of thrust bearings(SKF-51216), machining and assembly, operating handles)- 5 set, Screw rod of Ø63mm dia. & Length-3900mm sq. threaded to M62x9 of IS-4694- 5 x 3.9mtr.

Erection, positioning, aligning, fixing, trial, commissioning, testing etc. of second stage embedded parts consisting of sill beam, side seal, track, guide etc., vertical lift gate consisting of skin plate, horizontal girder, end vertical girder, seal flats etc., screw hoisting arrangements consisting of hoist bridge, gear box, cross beams, CI gear base plate, fixing of anchor bolts, etc. of total weight around 3017.45kg for 5 nos. of monoblock gates as per specification with all accessories including machinery, fixtures, labour, watch & ward, cutting, welding, drilling, boring, cleaning, finishing, consumables with lead & lifts and transportation charges with labour charges for loading and unloading all complete as per instruction of Engineer-in-charge.