Water Resources Department Tender

Supply of Elegant look 100 W AIO LED Solar Street lights having extruded alluminium housing, 180Wp or more Mono Crystalline Panel/Laminates fixed on the top of the luminaire housing, maintenance free 12.8 volts 96 Ah or more LiFePO4 battery(BIS certified) , BMS, MPPT charge controller having efficiency 92% as per EN50530 , PIR sensor to provide 2 days (24 hrs ) back up . The luminaire is having IP 65 protection for critical components, IK 07 and having lumen output of 15000 lumen as LM 79 report of third party NABL lab . Lenses should be provided on the LED chip for better lighting dstribution to avoid glare on human eyes. Both the luminaire and Mono Crystalline Panel must be manufactured in India. The Solar lighting company must submit the third party NABL lab reports to justify the lumen efficacy,luminaire output , IK 08 and IP 65 protection ( In house NABL lab reports will not be acceptable). The Luminaire should be supplied along with adjustable type mounting bracket with it's additional support to fix the light strongly to withstand wind speed of 180 KM/HR or more.The AIO solar lights must be designed to withstand 180 KM /Hr Wind speed and wind speed report of any wattage AIO solar light with 180 WP or more Solar panel should justify the same. The Solar lighting companies must be having inhouse NABL lab and having registered office in Odisha & Toll free base After sales service set up within 100 -150 KM from the project site .The Solar lighting manufacturer must submit the declaration letter by mentioning that complete solar light and the solar panel are manufactured in India ( Made in China product are not acceptable) and warranty certificate on their company's letterhead by mentioning warranty period as 5 years & Tollfree Number & whatsapp number for registering the complaint to get the after sales service within warranty period The following test reports of third party NABL lab shall be submitted for the technical evaluation of product 1. LM 79 REPORT (Third party NABL lab only) , 2. IK 08 ( Report of Third party NABL lab ) ,3. IP 65 (Report of Third party NABL lab). The AIO Solar Street light must complies to the following standards and necessary test reports of any wattage of solar lights must be submitted prior to start of the work/TDS approval 1. EN50530 – MPPT Efficiency , 2.. IEC61547 , 3. IEC61000-3-2 – EMC , 4. IEC 60598-2-3 ,5. IEC 62109-1 6.Wind speed report of AIO solar light with 180 Wp Module suitable for 180 Km/Hr wind speed Make : Philips/Bajaj/Havells/Panasonic/Wipro/Crompton only

Supply of 8 mtr long hot dip galvanized Octagonal pole having base dia of 155 mm and top dia of 70 mm and plate thick ness of 4 mm or more complete with base plate and 4 nos. Jtype En 8 grade foundation bolts to withstand wind speed considering the weight & dimension of Solar light fixed on the top of the pole . Make : Bajaj/Valmount/Vakrangi/RR Ispat/ Utkarsh/Utkal Galvanizers only

Construction of RCC foundation by using M20 grade RCC and Fe 415 grade reinforcement in the foundation by considering the SBC as 10 T per sq mtr and fixing the 4 nos. fdn bolts in that foundation for installation of pole with Solar light on that foundation. The work shall be excuted as per the direction of EIC.