Water Resources Department Tender

Reinforcement Cement concrete of design mix of M20 grade having specified characteristic compressive strength of 20N/mm2 in design mix with minimum quantity of cement as specified in I.S. code of 150 mm cube at 28 days curing after mixing & tests conducted in accordance with relevant clauses of I.S. – 516 using crusher broken hard granite coarse aggregate 20mm down graded and proportion as specified in I.S. 456 code and subject to mix design in conformity to the grading and proportion of different materials of concrete in structures as specified in the relevant codes of approved quantity obtained from approved quarry of tested and approved quality free from weathered skin surface and any other deleterious materials, uniform colour & texture with mixing concrete in batching plant, conveying the same by transit mixers and placing in position for structures etc. l with all leads, lifts and delifts including cost, carriage, royalties, taxes of all materials excluding GST, but including cess and quality control test cost of all materials, dewatering, mixing and vibrating by mechanical means placing in proper place and providing grooves or beads wherever necessary including cost, carriage of water, curing , T&P, hire & running charges of all machineries, labour and supervision charges including mobilization and demobilization and working of machineries etc with cost of construction and maintenance of coffer dam and diversion arrangement and removal required etc complete as per the approved drawing, design, specification and direction of the Engineer-in-Charge.

Providing rigid Form work for concrete with F1 finish for U/S faces of Dams, Spillway, glacis of barrages, unexposed surfaces of foundation, block joints etc. with the box type steel shuttering plates rigidly fixed blocks including cost of all materials all labour T&P, taxes and dismantling after casting with all lead, lift & delifts and all incidental charges etc. but excluding GST and complete the work in all respects as per specification and as per direction of Engineer-in-charge.

Supplying, straightening, cutting, bending, binding of HYSD un coated Tor rods of different sizes as per design, for RCC works tying the grills and placing in position in all heights for fabrication and framing reinforcement with laps and hooks, ties, chairs and tack welding, whenever necessary with all leads, lifts and delifts including cost, conveyance and taxes of all materials including cost of steel of (SAIL or any approved make i.e. TATA) binding wire 18 to 20 SWG, T&P including transportation to work site loading, unloading and taxes of all materials labour charges, cess etc. but excluding GST and complete the work in all respect as per drawing, design & specification as per direction of Engineer-In-Charge.

Filling in foundation & plinth with excavated materials including watering and ramming with all labour, T & P etc. to the requires level including cost, carriage & cess of all materials etc. but excluding GST and complete the work in all respects as per drawing, design,specification and as per direction of Engineer-in-charge.

Excavation of any approved type of soil in approved borrow area by mechanical means loading into transport vehicle and transportation by mechanical means and unloading the soil within all leads properly prepared and scientifically approved surface including spreading and leveling the earth in 22.5 cm layer to make ready for watering and compaction with sheep foot rollers and dozers but excluding watering and compaction in dams and dykes for all heights with all cost, conveyance and all incidental charges, royalty, taxes, cess etc.complete but execulding GST but complete the work as per design, drawing, and specification and direction of the Engineer-in-charge.

Providing and fixing 12 mm. thick Bitumenous/Salitx Expansion Joint Board(I.S.I) in contraction joints including all cost, conveyance, taxes, labour, labour cess, T&P but execulding GST etc. complete the work in all respect as per specification & direction of the Engineer-in-charge.