Water Resources Department Tender

C.B.Brick masonry with cement mortar(1:6) in superstructure including cost, conveyance, royalty & taxes of all materials to the site of work with all leads , lifts & delifts & curing, all labour, T&P., Cess etc., complete as per specification & direction of the Engineer-in-charge.

Reinforcement Cement concrete (1:2:4) with 12mm size hard granite crusher broken chips including cost, conveyance, royalty & taxes of all materials to the site of work with all leads , lifts & delifts & curing, all labour, T&P., Cess etc., complete as per specification & direction of the Engineer-in-charge.

Rigid and Smooth Centering and Shuttering for R.C.C. works including false works and dismantling them after casting including cost, conveyance & taxes of all materials to the site of work with all leads, lifts & delifts & curing, all labour, T&P., Cess etc., complete as per specification & direction of the Engineer-in-charge.

Plinth band & Column Base

Lintel

Beam & Column

Slab & Chajja

Supplying, Fitting & placing uncoated HYSD bar and placing in position at all height for fabrication and fixing reinforcement with lap and hooks ties, chairs and tack welding wherever necessary including cost of M.S. Rod , binding wire 18 to 20 gauge including transportation, loading, taxes of all materials with all leads, lifts, labour, T&P., Cess etc complete as per specification & direction of the Engineer in Charge.

16 mm thick cement plaster in cement mortar (1:6) over brick work including cost, conveyance, royalty & taxes of all materials to the site of work with all leads , lifts & delifts & curing, all labour, T&P., Cess etc., complete as per specification & direction of the Engineer-in-charge.

12 mm thick cement plaster in cement mortar (1:6) over brick work including cost, conveyance, royalty & taxes of all materials to the site of work with all leads , lifts & delifts & curing, all labour, T&P., Cess etc., complete as per specification & direction of the Engineer-in-charge.

2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite crusher broken chips including cost, conveyance, royalty & taxes of all materials to the site of work with all leads , lifts & delifts & curing, all labour, T&P., Cess etc., complete as per specification & direction of the Engineer-in-charge.

Supplying, fitting and fixing of M.S. Panelled Door on wall in position with C.C (1:3:6) of double leaved shutter with M.S. frame over all size including frame-1980mm (H) x 1800mm (W) made out of the following materials conforming to relevant ISS. Frame:- 35x35x6mm M.S. angle, shutter style:- top & bottom tail 25x25x3mm M.S. angle Door Panel 1.0mm C.R sheet panel stiffener covering width of each leaf :- 19x5mm M.S flat 3 nos. on each leaf. Hinges size 100mm 6 nos.(3 nos. on each side ) bought out as per SS. Hold fast 35x35x6mm M.S. angle 175mm lenght bifurcated tip 3 nos. on each side. Handle 19x5mm M.S flat fabricated 4 nos. aldrop 2 nos. bought out as per ISS tower bolt:-2 nos. bought out as per ISS. including all cost, conveyance labour charges all taxes, T&P,cess, etc. complete as per the direction of the Engineer-in-chief.

Supplying, fitting and fixing of M.S. Panelled Window double leaved shutter with M.S. frame & Grill Over all size including frame 1200mm Height x 900mm Width made out of the following materials conforming to relevant ISS Frame 35x35x6mm M.S Angle Shutter style Top & bottom rail 25x25x3mm M.S Angle Window Panel 1.0mm C.R. Sheet. Panel stiffener covering width of each leaf 19x5mm M.S Flat 2 nos. on each leaf. Hinges size 100mm 4 nos. (2 nos. on each side) bought out as per ISS. Hold last 35x35x6mm M.S. Angle 100mm lenght bifurcated tip 2 nos. one each side.Handle- 19x5mm M.S Flat 2 nos. Fabricated ( in side). Tower bolt:- 4nos. bought out as per ISS. Hold fast 35x35x6mm M.S Angle 100mm lenght bifurcated tip 2 nos. one each side. Handle 19x5mm M.S Flat 2 nos. Fabricated (inside).Tower bolt 4nos bougth out as per ISS. Horizontal Grills 12mm M.S. Round at 100mm spacing including all cost, conveyance labour charges all taxes, T&P,cess, etc. complete as per the direction of the EIC.

White washing 3 coats with shell lime including cost, conveyance & taxes of all materials to the site of work with all leads , lifts & delifts & curing, all labour, T&P., Cess etc., complete as per specification & direction of the Engineer-in-charge.

Colour washing two coats with shell lime and colouring materials including cost, conveyance & taxes of all materials to the site of work with all leads , lifts & delifts & curing, all labour, T&P., Cess etc., complete as per specification & direction of the Engineer-in-charge.

Painting two coats over one coat of primer with approved paint on new wood / steel work including cost, conveyance & taxes of all materials to the site of work with all leads , lifts & delifts, all labour, T&P., Cess etc., complete as per specification & direction of the Engineer-in-charge.

Fixing tiles in floors, treads or steps and landing on 25mm thick bed of C.M (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing with cost, conveyance, royality and taxes of all materials to the site of work with all leads and lifts and delifts, all labour, T&P., curing and Cess etc., complete as per specification & direction of the Engineer-in-charge.

Fixing tiles in dados, skirting and risers of steps on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing with cost, conveyance, royality and taxes of all materials to the site of work with all leads and lifts and delifts, all labour, T&P., curing and Cess etc., complete as per specification & direction of the Engineer-in-charge.

Filling foundation & plinth with excavated earth well watered & rammed in layers not exceeding 23cm in depth including all leads, lifts & delifts, all labour, T&P., Cess, etc., complete as per specification & direction of the Engineer-in-charge.