Water Resources Department Tender

Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60 Kg/sqm using mechanical means as per Clause 502 of MoSRT&H Specifications for Road & Bridge works (4th Revision) with all leads, lifts and delifts including cost, conveyance, cess including labours and hire charges of T&P materials required for the work, hire and running charges of machineries etc. all complete as per specification and direction of the Engineer-in-Charge.

Providing and applying tack coat with bituminous emulsion (60/70) penetration grade using the emulsion pressure distributer @ 0.20 Kg per sqm on the prepared bituminous/granular surface cleaned properly with mechanical broom as per clause 503 of MoSRT & H Specification for Road & Bridge work (4th revision) with all leads, lifts and delifts including cost, conveyance, cess etc. including labours and hire charges of T&P materials required for the work, hire and running charges of machineries etc. all complete as per specification and direction of the Engineer-in-Charge.

Providing laying Bituminous Macadam with hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laid over previously prepared surface with hydrostatic paver finisher with sensor control to the required grade , level & alignment & rolling with smooth wheeled, vibratory & tandem rollers to achieve the desired compaction as per clause 504 of MoSRT&H specification for road and bridgeworks ( 4th revision) including cost conveyance royalty, cess and hire charges of machineries and all other T & P complete as directed by the Engineer in charge.

Providing laying Semi dense Bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laid over previously prepared surface with hydrostatic paver finisher with sensor control to the required grade, level & alignment & rolling with smooth wheeled, vibratory & tandem rollers to achieve the desired compaction as per clause 508 of MoSRT&H specification for road and bridgeworks ( 4th revision) including cost conveyance royalty and hire charges, cess etc. complete as directed by the Engineer in charge.

Quarrying, collecting, supplying and stacking of good quality of moorum and sand in regular box heap size of 1.50m X 1.50m X 0.50m to be measured as one cum and admixing moorum and sand in (60 : 40) proportion and laying in sub-base of road in layers not exceeding 150 mm thick with all leads, lifts and delifts including cost, conveyance, royalty, cess including hire charges of T&P materials required for the work, watering and consolidation with P.R.R., hire and running charges of machineries etc.complete as per specification and direction of the Engineer-in-Charge.

Earth work in excavation in all kinds of approved soil from approved borrow area by mechanical means with all leads, lifts and delifts including loading into the transportation vehicles and unloading from transported vehicles and depositing the same on properly prepared and scientifically approved surface including rough dressing and breaking the clods to maximum 5cm. to 7cm., laying in layers not exceeding 22.50cm including removal of roots, shrub jungles, bushes and all foreign debries from the earth and benching the old embankment, sectioning, cambering the earth work, watering and compaction with all types of compacts equipments under OMC conditions to attain minimum proctor dry density of 95.00% for all heights of banks and slopes with required quality control test including construction, maintenance, watering, dewatering and lighting of haul roads and borrow area including mobilization and demobilization of men and machineries and all incidental charges required for the completion of work, complete in all respect including cost of royalty with labour cess as per approved drawing, specification and direction of the Engineer-in-Charge. (Measurement shall be taken on finished compacted section .Borrow area is to be arranged by the agency at his cost and responsibility)

Fine dressing of earth work in slope of embankment including filling of earth of rain cuts and slopes with selected earth at contractors own cost and duly compacted and trimmed to the required profile and turfing with dub sods of rectangular shape of minimum 0.25 cm thick with cost, conveyance by mechanical means with all leads, lifts and delifts, cess including mobilization, demobilization, supervision charges with cost of all other materials, approach road, diversion road, site illumination including watering the sods till survival of grass with all cost incidental to the work etc. complete as per specifications and the direction of the Engineer-in-Charge. (Measurement will be taken after survival of grass).

Earth work in excavation of foundation of structures by manual / mechanical means in ordinary soil including stony earth and gravel in both wet and dry condition including jungle clearance, stumps removal, shoring, shuttering, propping, bullah pilling, dewatering the foundation, providing coffer dam, diverting the water away from the structure levelling and dressing the slopes and bed including breaking clods to maximum 5 cm to 7 cm size and depositing the excavated materials away from the working area / in the embankment section in layers not exceeding 15 cm in depth or any specified place with all leads, lifts, delifts, handling and rehandling etc.complete including construction and maintenance of approach road, diversion road, cess etc. including mobilization and demobilization of men and machineries etc. with all cost of incidental charges etc. complete as per drawing ,specification and the direction of Engineer-in-Charge.

Filling foundation and plinth with sand by mechanical/manual means and laying in layers duly compacted, watering including cost, carriage, royalty with all leads, lifts, delifts, cess etc all complete as per drawing and specification and as per the direction of Engineer-in-Charge.

Providing & laying cement concrete (1:3:6) in approved surface using 40 mm size and down graded black hard granite (crusher broken) chips and sharp sand of approved grading from approved quarry for CC work conforming to specification, mixing by concrete mixture including hoisting and laying concrete in position, compacting with concrete vibrator with all leads, lifts, delifts for mix concrete, royalty of all materials, cess including dewatering, curing for specified days by suitable means with supervision charges including mobilization and demobilization with cost of construction and dismantling of gangway and scaffolding, chute with all materials, construction of coffer dam / approach road, diversion road, site illumination, hire and running charges of machineries, dewatering by suitable means required for the work as per approved drawing and specification complete with all cost as directed by Engineer-in-Charge.

Providing & laying cement concrete conforming to M-15 grade in approved surface using 20 mm size and down graded black hard granite (crusher broken) chips and sharp sand of approved grading from approved quarry for CC work conforming to specification, mixing by concrete mixture including hoisting and laying concrete in position, compacting with concrete vibrator with all leads, lifts, delifts for mix concrete, royalty of all materials, cess including dewatering, curing for specified days by suitable means with supervision charges including mobilization and demobilization with cost of construction and dismantling of gangway and scaffolding, chute with all materials, construction of coffer dam / approach road, diversion road, site illumination, hire and running charges of machineries, dewatering by suitable means required for the work as per approved drawing and specification complete with all cost as directed by Engineer-in-Charge.

Rigid & smooth centering, shuttering for RCC works (foundation & plinth) including false works and dismantling them after casting including proper curing with cost, carriage, cess etc. all complete as per specification and direction of Engineer-in-Charge.

Providing and fixing of Weep Holes in Brick Masonry / Plain Concrete / RCC in abutment, wing wall and return wall etc. with 100 mm Dia AC pipes extending through full width of structure in slope of 1V:20H towards drawing face using cement mortar (1:3) with cost of all materials, curing, royalty, cess etc. all complete as per drawing and technical specification and direction of the Engineer-in-Charge.

Supplying, laying, fixing and fitting in position of RCC Hume Pipes of 150 mm dia and filling in joints using cement mortar (1:3) with Reinforced Cement Concrete (1:2:4) with 12 mm and down graded hard granite crusher broken coarse aggregates complete including cost, carriage of hume pipe, cost of labour,curing, cess etc. complete as per specification and direction of Engineer-in-charge.