Water Corporation Of Odisha Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Water Corporation Of Odisha - WATCO Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date5 Apr 2025
Closing Soon2 May 2025
Tender Amount₹ 3,26,06,000
Technical
Technical
Financial
Additional Eligibility
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is "A" Class Contractors license/ "A" Class Contractor, and also includes Contractors of equivalent grade/class registered with Central Government/ any other State Government/ MES/ Railways, specifically those registered with the Odisha State Government.
Bid Capacity
... View More
The formula for bid capacity is: Assessed Available Bid Capacity = (A x N x 2 - B) ≥ Rs.326.06 Lakh, where A = Maximum value of works executed in any one year during the last five years, B = Value of current price level of the existing commitments and ongoing works to be completed during the next years, and N = Number of years prescribed for completion of the works for which the bids are invited.
Technical Capacity
... View More
The required prior work experience for the bidder includes a list of similar works executed during the last 5 years. The bidder needs to provide information on the name of the work/location, agreement number and date, name of the employer, value of the contract price, total value of work executed, and financial year-wise computed amount. The bidder also needs to provide the stipulated date of commencement and completion, actual date of completion, and reasons for delay, if any. The employer's certification, not below the rank of General Manager or equivalent, is required to support the claim. The amount of similar works completed is required to be mentioned in Rs. in lakh. However, no specific percentage of similar works completed is mentioned.
Costs
EMD
₹ 3,26,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DPWTC_112161_1Tender No
WATCO (P)-3(5)/2024-25 Dtd.26.03.2025Tender Authority
Water Corporation Of Odisha ViewPurchaser Address
-Website
http://tendersodisha.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying all labour, material, tools & plants for dismantling of bituminous courses of flexible pavements and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately, all complete as per specification and direction of Engineer-in-charge.
45
-
-
... More
Supplying all labour, material, tools & plants for dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces, not exceeding 0.02 cum in volume and stock piling at designated location and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable material separately, all complete as per specification and direction of Engineer-in-charge.
18
-
-
... More
Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead
37.5
-
-
... More
Supplying all materials, labour and T&P for filling in pipe line trenches etc., with sand including cost of sand, royalties, transportation to site for all leads and lifts, including loading, unloading, spreading in layers of loose thickness not exceeding 150mm, watering, ramming etc all complete as per direction of Engineer-in charge.
227.26
-
-
... More
Supplying all materials labour & T&P and providing (1:3:6) for C.C works with 40mm size hard granite metal including cost of all materials conveyance rovality etc. all complete.
30
-
-
... More
Supplying all materials labour & T&P and providing (1:2:4) for C.C works with 12mm size hard granite chips including cost of all materials conveyance rovality etc. all complete.
48.6
-
-
... More
Providing and laying of 60mm thick factory made cement concrete interlocking paver block of M 35 grade and approved make varoety colour and size made by block making machine block making machine with strong vibraatory compaction of approved size design and shape laid in required colour and pattern over and including 50mm thick compacted bed of sand etc complete coarse sand , filling the joints with the sand etc all complete including cost conveyance, royalties and taxes of all materials and cost of all labour, etc. complete as directed by Engineer in charge.
-
-
-
... More
Restoration of road after laying of Pipe Line
-
-
-
... More
Including Cost of Paver Tile -
18.75
-
-
... More
Excluding Cost of Paver Tile -
18.75
-
-
... More
Supplying all labour, T&P for filling in pipe line trenches etc., with excavated materials, moorum including watering and ramming as directed by the Engineer-in-charge.
527.5
-
-
... More
Supplying all materials, labour and T&P for Transportation of excavated material & disposing upto 5KM from work site including loading, unloading & stacking, supplying of all labours, tools & plants etc. all complete as per specification and direction of Engineer-in-charge.
361.77
-
-
... More
Supplying all materials, labour and T&P for Laying in trenches centrifugally Cast (Spun) K - 7 Class Ductile Iron socket and spigot pipe with internal cement mortar lining and external bituminous coating confirming to IS: 8329-2000 of the following nominal diameter as per specification and direction of Engineer-in-charge including cost of pipe carriage of pipes from store to worksite, supplying of all labour, material, tools & plants required to perform the work (Earthwork in trenches, jointing of pipes, specials & fittings to be measured and paid for separately)
-
-
-
... More
300 mm dia D.I.K-7 pipe
910
-
-
... More
Supplying all materials, labour and T&P for Providing Push-on-joints confirming to IS:3114 to centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using rubber gasket conforming to IS:5382 of Styrene Butadiene Rubber (S.B.R) quality , testing of joints, etc. all complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work.(excluding cost of rubber which will be supplied alongwith pipe)
-
-
-
... More
300 mm dia (Excluding Cost of Rubber Ring)
166
-
-
... More
300 mm dia (including Cost of Rubber Ring)
30
-
-
... More
Supplying all materials, labour and T&P for Providing flanged joints conforming to IS:3114 to FLANGED Cast Iron pipes and fittings of the following nominal diameter including testing of joints, cost of bolts nuts and rubber insertion, etc all complete as per specification and direction of Engineer In-Charge including supplying of all labour, material, tools & plants required to perform the work.
-
-
-
... More
300 mm dia
24
-
-
... More
200 mm dia
14
-
-
... More
150 mm dia
20
-
-
... More
100 mm dia
28
-
-
... More
Providing and fixing of CI mechanical joint socket conforming to IS 13382/92 to flanged ends of CI / DI Pipes including supply of all material, labour tools & plants and testing of joints, etc. all complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work
-
-
-
... More
300 mm dia
10
-
-
... More
200 mm dia
8
-
-
... More
150 mm dia
12
-
-
... More
100 mm dia
4
-
-
... More
Supplying all materials, labour and T&P for Providing, laying, fixing & testing of D.I / C.I Specials, Bends, etc in trenches confirming to IS: 1538 all complete as per specification and direction of Engineer-in-charge including supplying of all labour, material, tools & plants required to perform the work.
12.34
-
-
... More
Supplying all materials Labour & T & P for Fixing Ductile Iron Resilient Seated Glandless Sluice Valve Sluice Valve / NR Valve PN-1.6 with double flanged ends for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Sluice valve .(Make VAG /Talis /AVK /IVC/Kirlosakr/Equivalent make with approval of the authority)
-
-
-
... More
300 mm dia D.I.D/F Gland less Sluice valve
2
-
-
... More
200 mm dia D.I.D/F Gland less Sluice valve
1
-
-
... More
150 mm dia D.I.D/F Gland less Sluice valve
10
-
-
... More
150 mm dia D.I.D/F Non Return Valve
8
-
-
... More
Supplying all materials Labour & T & P for Fixing Gear Operated ButterFly valve with double flanged ends for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of valve .Make VAG /Talis /AVK /IVC/Kirlosakr/Equivalent make with approval of the authority
-
-
-
... More
300mm dia D/F Gear Operated Butter Fly Valve(PN-1.6)
1
-
-
... More
450mm dia D/F Gear Operated Butter Fly Valve(PN-1.6)
1
-
-
... More
Supplying all materials, labour and T&P for Providing and laying M.S. pipes of all classes conforming to IS:3589 & IS:3601 & MS Specials of the following outer diameter and outside painting etc. all complete as per specification and direction of Engineer In - Charge including supplying of all labour, material, tools & plants required to perform the work. (Earthwork in trenches, jointing of pipe to be measured separately) .
-
-
-
... More
457.00 mm outside dia MS Pipe (10.0 mm thick)
33
-
-
... More
323.9 mm outside dia MS Pipe (10.5 mm thick)
10
-
-
... More
219.10 mm outside dia MS Pipe (10.5 mm thick)
10
-
-
... More
168.3 mm outside dia MS Pipe (8.0 mm thick)
64
-
-
... More
450X450X450mm dia MS Plain Tee
1
-
-
... More
450mm dia 90' MS Plain Bend -
1
-
-
... More
450mm dia MS Flange 16mm thick -
4
-
-
... More
450mm dia MS Blank Flange 16mm thick -
2
-
-
... More
450X150X450 mm dia MS Plain Tee
10
-
-
... More
300X300X300 mm dia MS Plain Tee
1
-
-
... More
150mm dia MS Flange 10mm thick -
52
-
-
... More
150mm dia MS 90' Plain Bend -
6
-
-
... More
150mm dia MS 45' Plain Bend -
10
-
-
... More
150mm x 125mm dia MS Tapper -
4
-
-
... More
150mm x 100mm dia MS Tapper -
4
-
-
... More
450mm x 200mm dia MS Tapper -
1
-
-
... More
200mm dia MS 90' Plain Bend -
1
-
-
... More
200mm dia MS 45' Plain Bend -
4
-
-
... More
200mm dia MS Flange 12mm thick -
6
-
-
... More
450mm x 300mm dia MS Tapper -
1
-
-
... More
300mm dia MS 45' Plain Bend -
8
-
-
... More
300mm dia MS Flange 12mm thick -
12
-
-
... More
300mm dia MS 90' Plain Bend -
3
-
-
... More
4mm thick MS chequred Plate & MS channel 75mm x 40mm
322.26
-
-
... More
Supplying all materials labour & T P for fitting & fixing of MS screen piece of 450mm dia x 450 mm long duly welded with 12 sqmm MS square bar & MS square box for supporting to the wall of UGR during Micro concreting etc. complete.
114
-
-
... More
Supplying all materials, labour and T&P for Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labour, material, tools & plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge.
102.05
-
-
... More
Supplying all materials, labour and T&P for Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes and fittings AT SITE by using welding generator including testing of joints all complete as per specification and direction of Engineer-in-Charge.
135.58
-
-
... More
Cutting of C.I /DI pipe by eletric arc welding,at site including cost of materials,labour,T & P etc all complete
26.34
-
-
... More
Dismantaling of RCC wall by means of core cutting of 150mm dia to avoid further damage to adjacent concrete and reinforcement so that the reinforcement can be rewelded properly by chiseling with electric breaker eghing up to 7.5 kg with capacity of 20 oules impact to concrete atleast liveing a weldable length .The core should be taken to size they cut slabs to size so that can easily be removed from site by head load or by chain hauled from inside etc all complete.
-
-
-
... More
For Delivery piping arrangement from 30 HP pump to common Suction /delivery line at K -3 (B) Pump House
5
-
-
... More
Supplying all materials labour & T & P for making water proof Micro Concrete of any reputed brand (Preferable Perma Polycrete) for R.C.C. works including hoisting and laying etc. complete as per direction of Engineer in charge.
-
-
-
... More
For sealing of wall of Pump House after fixing of 150mm dia suction/delivery Pipe for centrifugal pump at K-3(B) Pump House
0.2
-
-
... More
Supplying all labour T&P materials for fitting & Fxing of pressure meter (Gauge) 0 to 8/10 kg Non comtact dipharma type with snubber, piping & needle valve on pipe line as well as diferent lane & sub-lane to know the water pressure including the cost of pressre meter with drilling holes in pipe line & making good to the damages at including cost all labours T&P etc all complete as per the direction of Engieer-in-charges. 0 to 68/10kg/sqm pressure meter.
-
-
-
... More
Rising main, distribution & pumping main line
10
-
-
... More
Supplying all materials labour & T & P for making hole in the DI/MS pipe & welding of MS/ GI socket including fixing of GI / SS short piece for fixing of Pressure transmeter in proper position etc complete.
-
-
-
... More
Rising main, distribution & pumping main line
10
-
-
... More
Supplying all materials, labour and T&P for Supply, Installation & Testing of DI Tamper proof Kinetic Air Valve conforming to IS 14845 for water works purposes for the following diameters including drilling the water main (Cast iron pipes with metal straps), all complete as per specification and direction of Engineer-in-Charge. (including cost of nut bolt washer, rubber insertion sheet, etc.).
-
-
-
... More
50mm dia single Tamper proof air valve with metal strap for pipe
2
-
-
... More
25mm dia single Tamper proof air valve with metal strap for pipe
3
-
-
... More
Supply installation testing & commissioning of electric powered electromagnetic full bore type IP 68 fully welded Flanged type water flow meter of Pulse DC type of Flow tube SS304, coil housing & electrodes SS316, SS ring type grounding etc with IP 67 signal converter remote mounting,input power supply 220VAC & out put 24V DC 4 - 20 mA,programable LCD display to show Actual flow rate, totalised flow, flow direction, flow velocity,conductivity with + or - 0.5 % accuracy etc & provision to diagnostics empty pipe detection, coil temperature, coil resistance etc & compatable to data communication modules & communication the data to remote SCADA station for live monitoring where ever required including providing data cable & power cable required as per site condition.The Standard calibration certificate & guarantee certificate for flow meter & electromagnetic signal converter to be given for minimum one year from the date of installation, The approved make (ABB/Krone/Immersion/E & H/Equivalent make with approval of authority) including cost of materials with all taxes transportation to site/ Storage with insurance .
-
-
-
... More
150mm dia full bore type electromagnetic Flow meter
2
-
-
... More
200mm dia full bore type electromagnetic Flow meter
1
-
-
... More
300mm dia full bore type electromagnetic Flow meter
2
-
-
... More
Supply,installation,testing & commissioning of double chamber DI control Valve (Globe type) with solenoid , hydraulic operated with stem and positioner for feed back switch, solenoid valve,integral orifice plate assemble, differential control,reverse flow control,restriction orifice body PN 1.6 can be integrated with PLC panel for operation with a minimum pressure in upstream 0.20 kg/cm2 to a maximum pressure 8 kg/cm2 of the approved make VAG/ SINGER/CLA/AVK/IVC/ Equivalent make with approval of the authority to control water supply including cost of materials with all taxes transportation to site / storage with insurance.
-
-
-
... More
150mm dia. Selonid valve pilot Actuated control valve
2
-
-
... More
200mm dia. Selonid valve pilot Actuated control valve
1
-
-
... More
300mm dia. Selonid valve pilot Actuated control valve
2
-
-
... More
Providing and laying in trenches HDPE (PE) pipes conforming to IS: 4984/2016 of following Class pipes of the following nominal bore and pipe fittings including testing as per specification complete. (Earth work in trenches to be measured and paid for separately)
-
-
-
... More
50 mm dia HDPE pipe of Class -PE - 63 PN-8.0
1000
-
-
... More
Supplying all materials labour & T & P for fitting , fixing & installation of SS box made out of 4mm thick plate covered with all faces of inner size 0.45m x 0.45m x 0.45 mtr height with 100mm round bar leg of 1.50 mtr height duly welded properly to avoid entry of water for display box of flow meter etc. complete as per direction of Engineer - in - Charge.
-
-
-
... More
For installation of flow meter display for flow meter of incoming & outgoing line at K -3 (B) pump House- 5 sets @ 28 kg/set
140
-
-
... More
Supplying all labour, T&P materials etc. and the construction of brick masonry sluice valve chamber of over all of following internal ; earth work in excavation in all kinds of soil; laying of 150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm size metal; 250mm thick brick masonry workin C.M (1:4) with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thick cement plastering with CM(1:3) with punning for inside surfaces & out side plastering above GL & cement pointing below GL etc. all complete including precast Factory made Heavy duty RCC cover slab with Frame ( SD-20) made out of M30 concrete to with stand against 20 MT vehicular load as per the approved drawing if any and the direction of Engineer-in-charge.
-
-
-
... More
S.V/FM.chamber internal size [0..9x0.90x1.20mtr]
15
-
-
... More
Air valve chamber [0.75x0.75x1.10mtr]
2
-
-
... More
Repair /reconstruction of Chlorination Room with Gate -
-
-
-
... More
Supplying all materials labour & T & P for dismantling of existing 50 HP pump set & its piping arrangement including disconnection of pipe line from existing system etc. complete as per direction of Engineer in charge.
1
-
-
... More
Dismantling and removing 2.5 cm.thick artificial stone flooring including stacking the useful materials for reuse and removing the debris within 50m lead
29.25
-
-
... More
Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead including cost of all labour T & P etc. all complete as per the direction of Engineer in charge.
1.44
-
-
... More
Supplying all labour, T&P for dismantling and removing old tiled cladding from walls including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris within 50m lead
7.2
-
-
... More
Dismantling I.W.C. with foot rest/EWC & removing debris with initial lead & lift including cleaning the line, cost of all labour T & P etc. all complete as per the direction of Engineer in charge.
1
-
-
... More
Removing old plaster, racking out joints to 12mm.deep & removing debris with initial lead & lift including cost of all labour T & P etc. all complete as per the direction of Engineer in charge.
7.2
-
-
... More
Providing and fixing to wall, ceiling and floor / in treanches of PVC ASTM (Sch-80) pipe& fittings of following nominal bore with clamps; including making good the wall ceiling and floor, all complete in ground floor (including the cost of materials ) as per the PHE specification and direction of the Engineer-in-charge.
-
-
-
... More
20mm dia UPVC pipe (wall ceiling )
8
-
-
... More
25mm dia UPVC pipe (wall ceiling )
20
-
-
... More
20mm dia PVC Brass Elbow
2
-
-
... More
20mm dia PVC Brass MTA
4
-
-
... More
25 mm PVC Ball Valve with solvent welded Metal Ball
3
-
-
... More
25 mm PTMT Ball cock with PVC Ball & Rod
1
-
-
... More
Supplying all materials,labour and T&P for cutting grooves in pucca floor and walls for taking P.V.C./G.I pipes and mending good the damages including cost of all materials, labour, T&P etc. all complete as per P.H. specification and direction of Engineer-in-charge.
8
-
-
... More
12 mm thick cement plaster in C.M. ( 1 : 4 ) over brick work to out surfaces including cost of materials, with taxes, royalties, transportation, all labours, T&P etc. all complete as per the direction of Engineer-in-charge.
10.08
-
-
... More
Supplying all materials labour & T & P for cement concrete 1:2:4 using 12mm size hard black granite chips including watering curing etc. complete.
3.07
-
-
... More
Supplying,Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid for separately)
1
-
-
... More
Supplying all materials, labour, T&P and fixing of ceramic tiles in floors, treads & landing of size 300mm x 300mm on 25mm. thick C.M. (1:1) jointed with neat cement slurry mixed with pigment to match the shed of the tiles including rubbing, polishing etc all complete. as per the direction of the Engineer in charge.
1.44
-
-
... More
Supplying all labour,T&P,materials for fittings, fixing of vetrified floor tile of size 600mm x 600mm of (Somany/KAJIRIA/Johnson or Equivalent) ( premium) with application of polymer modified cement base water resistant adhesive bed of required thickness 10mm and filling the joints with epoxy grout of approved quality etc. all complete.
36.21
-
-
... More
Fixing Tiles to dados skirting & risers on 12mm. thick C.P (1:3) jointed with neat cement slurry with cost of precast tiles.(300mm x 450mm) including watering curing etc comoplete.
10.08
-
-
... More
Providing, fixing, fitting of following Brass / Gun metal/Chromium plated/PTMT fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge.
-
-
-
... More
15mm dia C.P. long body Bib cock
1
-
-
... More
15mm dia C.P. Pillar Cock
1
-
-
... More
C.P. soap disc.
2
-
-
... More
Overhead shower with ball bearing arrangement.
1
-
-
... More
C.P. Towl Ring
1
-
-
... More
C.P. Glass shelf with Glass -
1
-
-
... More
C.P. waste. (32mm - Small)
1
-
-
... More
32mmx800mm long PVC waste pipe
2
-
-
... More
15mmx450mm PVC connection pipe
2
-
-
... More
125mm dia C P Gratings
2
-
-
... More
CP Arm for Over head Shower
1
-
-
... More
600mm x 20mm C.P. Towel rail
1
-
-
... More
Framed Mirror 600mm x 450mm size
1
-
-
... More
Cistern with complete fittings
1
-
-
... More
20mm dia c.p concealed stop cock
1
-
-
... More
15mm dia C.P. Angular Stop Cock
2
-
-
... More
22"x 16"(550x400) W.H.B
1
-
-
... More
Standard Pedestal for WHB
1
-
-
... More
C.P. extension piece-2"
6
-
-
... More
C.P. flange(Small)
6
-
-
... More
15 mm CP 2 in 1 Bib cock
1
-
-
... More
CP Health Foucet with 1.0 mtr PVC Tube
1
-
-
... More
15mm dia C.P. short body Bib cock
1
-
-
... More
EWC standard seat cover
1
-
-
... More
Providing, fitting, fixing 100mmdia P.V.C SWR / HCI pipe of standard manufactures, including all jointing, earthwork in excavation of trenches in all kinds of soil up to a depth of 0.9mtr. and refilling the trench in 0.3mtr. layers duly watered and rammed or fixing to walls with supply of nails, bobbings, wall plugs all complete as per the PHD specification and the direction of t he Engineer-in-charge.
-
-
-
... More
100mm dia P.V.C. SWR S/S Pipe ( type-A)
10
-
-
... More
100mm dia P.V.C. SWR P Trap
1
-
-
... More
Supplying all materials labour T&P and fitting fixing of FRP single Pannel PVC moulded door with Chowkaths including all cost conveyance labour for fixing hard ware fittings etc. all complete as per direction of Engineer - in -charge.
1.38
-
-
... More
Supplying and fitting fixing of Unplasticised ploy vinyle chloride (UPVC)Venttilator /Top Hung -60 series duly manufactured using UPVC reinforced profile of 60mm x 55mm x 2.5 mm for outer frame ,75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system,structurally reinforced with hot dip galvanised up to 50 microne of minimum thickness 1.5 mm prefabricated & welded through fusion welding , the window sash shall be fitted with 6mm thick clear toughened glass of SAINT- GOBIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No per set of sashes and the system is to be installed at the site using anchor fasteners , silcon rubber sealant ,easy glazing /deglazing at site etc including cost conveyance ao all materials ,accessories , labour charges, materials,and product confirming to ASTM D-638-14 EN -477-95 and other applicable code & standards.
0.36
-
-
... More
Finishing plastered surfaces of walls with Berger Synthetic putty (interior) & marking smooth to receive painting
54.81
-
-
... More
Provision for Plastic emulsion painting two coats to walls with over a coat of primer of approved shade on plastered surface to give an even shade in all heights including cost, conveyance, taxes of all materials, cost of all labour, T&P safety belts, sundries etc. as required for the work complete .
54.81
-
-
... More
Fixing of following capacity three layer white Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS specification including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position including construction of RCC stagging etc all complete as per specification and direction of the Engineer in charge (First Floor)
-
-
-
... More
1000 ltr capacity PVC Moulded Tank
1
-
-
... More
Wall painting two coat with weathercoat over a coat of primer of approved shade on new work to give an even shade in Ground Floor.
1066.6
-
-
... More
Supplying all labour, materials, T & P & painting two coats with approved enamel paint over a coat of primer on iron work including cost of paint etc. all complete as per direction of Engineer-in-charge.
29.08
-
-
... More
Construction of RCC Roofed positive Suction Pump House at K3 B, Kalinganagar
-
-
-
... More
Earth work of excavation in Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered etc as per direction of Engineer - in - Charge.
-
-
-
... More
1st depth up to 1.50 mtr lift
80.56
-
-
... More
2nd depth from 1.50 mtr to 3.00 mtr lift
55.28
-
-
... More
3rd depth from 3.0 mtr to 4.50 mtr lift
24.07
-
-
... More
Earth work of excavationof founation in laterite rock or any hard rock (other than granite or disintigrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department
-
-
-
... More
1st depth up to 1.50 mtr lift
80.56
-
-
... More
2nd depth from 1.50 mtr to 3.00 mtr lift
82.93
-
-
... More
3rd depth from 3.0 mtr to 4.50 mtr lift
36.11
-
-
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty , taxes& labour cess etc all complete as per specification and direction of Engineer-in-charge.
102.19
-
-
... More
Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour ,materials with all taxes, lead ,T & P etc all complete .
16.25
-
-
... More
Supplying all labour , T&P and removing surplus earth /debrise by mechanical means within 10 K.M radious etc all complete as per the direction of EIC.
277.44
-
-
... More
R.C.C work in ground floor of M-30 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .
-
-
-
... More
Beyond 1.5 mtr up to 4.50 mtr depth
34.28
-
-
... More
Up to 1.5 mtr depth & Ground Floor
49.21
-
-
... More
Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.
83.49
-
-
... More
Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete.
-
-
-
... More
R.C.C. Foundation, Plinth Band, Footings, Column Base, Mass Concrete & Precast Slabs
-
-
-
... More
Below 1.50 mtr depth
10.44
-
-
... More
With in 1.50 mtr depth
44.57
-
-
... More
R.C.C. Beams, Column, Grider and Bressmer
-
-
-
... More
Below 1.50 mtr depth
11.52
-
-
... More
With in 1.50 mtr depth
110.58
-
-
... More
R.C.C. Lintels
23.21
-
-
... More
R.C.C. Walls and Fins
-
-
-
... More
Below 1.50 mtr depth
94.24
-
-
... More
With in 1.50 mtr depth
83.63
-
-
... More
Floor & Roof Slabs, Landings, Balconies, Projecting, Sun Shades and Chajja
126.14
-
-
... More
Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) brick masonary in Foundation & Plinth
4.93
-
-
... More
Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) brick masonary in Superstructure.
35.01
-
-
... More
2.5cm. thick grading concrete (1:2:2) on roof slab with 6mm. Size on new work crusher broken Granite chips including cost of Materials labour etc complete in all respect.
103.52
-
-
... More
Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:4) brick masonary in foundation & plinth.
3.6
-
-
... More
Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:4) brick masonary in Superstructure.
1.64
-
-
... More
Supplying all materials, labour T & P for providing C.C. (1:2:4) with 12mm. Size C.B.H.G. chips, in flooring including hoisting and laying etc. all complete as per specification and direction of Engineer-in-charge.
3.24
-
-
... More
Supplying all materials labour & T & P for 12mm. thick cement plaster in cement mortar (1:4) over brick work /RCC work including curing scafolding etc. complete.
274.17
-
-
... More
Supplying all materials labour & T & P for 12mm. thick cement plaster in cement mortar (1:6) over brick work including curing scafolding etc. complete.
244.57
-
-
... More
Supplying all materials labour & T & P for 16mm. thick cement plaster in cement mortar (1:6) over brick work including curing scafolding etc. complete.
328.41
-
-
... More
Providing , fitting & fixing up UPVC ( Unplasticized Poly vinyle Chloride ) casement window (sliding type) with top fixed -60 series duly manuforced using UPVC reinforced profile of 60mmx55mmx2.5mm for outer frames, 75mmx60mmx2.25mm for casement window sash profile & 74mmx60mmx2.5mm mulion profile capable of mounting single glazing system strually reinforced with Hot deep galvanised upto 50 microns of minimum thick ness of 1.5 mm prefabricated & wedded through fusion welding the window sash shall be fitted with 6 mm toughened glass & saint-Gobain make duly fixed with EPDM weather seal clear including all cost conveyance labour T & P etc complete as per direction of Engineer in Charge.
6.08
-
-
... More
Supplying all materials labour T&P for providing M.S. Grill/ Grill gate /Pipe as per following size as per specification.all complete.
650.5
-
-
... More
Supplying all materials,labour and T&P for frame work for single gantry rail with colums , beams ismb 200X 100MM of joist & 16 mm. Thk.gusset plate,and channel, necessary welding ,gas cutting for manufacturing the whole structure all complete as per the direction of Engineer in charge.
1
-
-
... More
Supply installation testing & commissioning of Single Grider 3 ton capacity 4 fall 9mtr 4 contactor panel electric wire rope hoists with HT motor type sq case crane duty 5 HP motor 150 start/stop, 40%CDF class F insulation and C.T unit motor including control panel 4 contactor panel with transformers ,limit switch, MS fabrication dust etc including accessories complete.
1
-
-
... More
Finishing plastered surfaces of walls with Berger Synthetic putty (interior) & marking smooth to receive painting
847.14
-
-
... More
Provision for Plastic emulsion painting two coats to walls with over a coat of primer of approved shade on plastered surface to give an even shade in all heights including cost, conveyance, taxes of all materials, cost of all labour, T&P safety belts, sundries etc. as required for the work complete .
847.14
-
-
... More
Supplying all materials labour & T & P for fitting & fixing of Stainless Steel Ladder made out of SS square bar , Round bar etc for approach to sunken floor pump house fixed in proper position & alignment including anchor bolting etc complete as per direction of Engineer - in charge .
313.99
-
-
... More
Supplying all labour, materials and tools and plants for enamel painting two coat over a coat of primer on MS doors/grills as per the approved shade and colour as per direction of Engineer in charge
31.12
-
-
... More
Supplying all labour,T&P,materials for fittings, fixing of vetrified floor tile of size 600mm x 600mm of (Somany/KAJIRIA/Johnson or Equivalent) ( premium) with application of polymer modified cement base water resistant adhesive bed of required thickness 10mm and filling the joints with epoxy grout of approved quality etc. all complete.
28.56
-
-
... More
Supplying all materials, labour, T&P and fixing of Fixing KOTA Tile in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete polishing etc all complete. as per the direction of the Engineer in charge.
84.6
-
-
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.C/C and stainless square pipe bracing of size case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
19.6
-
-
... More
CONSTRUCTION OF APPROACH ROAD
-
-
-
... More
Supplying all labour, T&P and earth work in excavation in all kinds of soil in trenches for pipes etc. including dressing and leveling the bed and depositing the soil within 50m initial lead and 1.5m initial lift as per the direction of the Engineer-in-Charge.
143.55
-
-
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty , taxes& labour cess etc all complete as per specification and direction of Engineer-in-charge.
166.74
-
-
... More
Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour ,materials with all taxes, lead ,T & P etc all complete .
23.29
-
-
... More
Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:4) brick masonary in foundation & plinth.
22.35
-
-
... More
Supplying all materials, labour T & P for providing C.C. (1:2:4) with 12mm. Size C.B.H.G. chips, in flooring including hoisting and laying etc. all complete as per specification and direction of Engineer-in-charge.
18.77
-
-
... More
Supplying all materials labour & T & P for 12mm. thick cement plaster in cement mortar (1:4) over brick work /RCC work including curing scafolding etc. complete.
33
-
-
... More
Providing Supplying, fitting and fixing of 60mm thick interlock concrete colour paver block on compacted river coarse sand free from all organic materials and filling the joints with sand. including cutting corbelling, splays where ever necessary to proper size with cost, conveyance, royalties and taxes of all materials and cost of all labour, etc. complete in all respect as directed by Engineer in charge.
440
-
-
... More
Recessed/Surface main wiring along with earth wire with the followiing size of PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.60mm in surface/recessed PVC conduit as required. (Make of wire: Finolex/L&T/Anchor/Havells/V-guard/Equivalent make with approval of the authority).
40
-
-
... More
Recessed/Surface sub main wiring along with earth wire with the followiing size of PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.60mm in surface/recessed PVC conduit as required. (Make of wire: Finolex/Polycab/Havells/Equivalent make with approval of the authority).
18
-
-
... More
Recessed / Surface wiring to light point / fan point /Exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated single core multi strand copper conductor of ISI marked with 20 mm dia non-m , MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire -Finolex/L&T/Anchor/Havells/V-Guard/Equivalent make with approval of the authority)
-
-
-
... More
Light Points
32
-
-
... More
10A/20 A Plug Point
5
-
-
... More
Fan Point
6
-
-
... More
Supply ,fitting and fixing of the following fixtures on existing board / cover and connection as required.
-
-
-
... More
Celing Rose -
24
-
-
... More
Supply ,fitting and fixing of the following fixtures on existing board / cover and connection as required.
-
-
-
... More
Angle Holder -
11
-
-
... More
Supply and fixing of electronic Fan Regulators.(Mini)
2
-
-
... More
Supply fitting fixing of 1200mm Ceiling fan (Philips/CG/Havells/Equivalent make with approval of the authority)
2
-
-
... More
Supply fitting fixing of Heavy Duty Single Phase 1400 rpm Exhaust Fan 450mm (Philips/CG/Havells/Equivalent make with approval of the authority)
4
-
-
... More
Supply and fixing of LED Tube Light 20watt.
28
-
-
... More
Supply, fitting & fixing of Board with cover 18Modular.
2
-
-
... More
Supply, fitting & fixing of Board with cover 12Modular.
1
-
-
... More
Supply, fitting & fixing of 10A 1way Switch.
39
-
-
... More
Supply, fitting & fixing of 6A 3 pinSocket.
4
-
-
... More
Supply, fitting & fixing of Board with cover 3Modular.
1
-
-
... More
Supply, fitting & fixing of 20A 1way Switch.
1
-
-
... More
Supply, fitting & fixing of 16A Socket.
1
-
-
... More
Supply and fixing of 48 watt LED street light with bend pipe, clamp etc.
4
-
-
... More
Supplying all materials, labour and T&P fitting and fixing of unmaned control device of 3 Module 24Hour Program, Programmable every 15 min, backup of 10 hours current capacity 32Amps. with necessary internal wiring using copper cable,clipping ,socketing and enable to ON/OFF the Exhaust Fans -4 nos. as per schedule.
1
-
-
... More
Supply of Hot dip Pole for mounting and installation of the street light of 6 mtr long with bracket as per specification and direction of Engineer in charge.
12
-
-
... More
Supply and fixing of 70 watt LED street light etc. Endura Omniplus
12
-
-
... More
Supply and fixing of 2.5 Sq.mm x 3 Core Pvc Insulated & Pvc Sheathed Copper Conductor Industrial Cable 1100 V.
240
-
-
... More
Supplying all labour T&P and earth work in excavation in all kind of soil, in pipe trenches etc. including dressing and levelling the bed and depositing the soil eithin 50M initial lead and 1.5M initial lift, as per the direction of the Engineer -in- Charge
20.25
-
-
... More
Providing and laying in trenches HDPE (PE) pipes confirming to IS:4984/2016 of class PE-63(8 kgf/cm2) of the following nominal bore and pipe fittings including testing a per specification complete ( earth work in trenchesto be measured and paied for separately)25mm dia HDPE pipe
220
-
-
... More
Supplying all ,materials, labour, T & P for refilling the trenches with excavated materials within 50M initial lead and 1.5M initial lift etc. all complete.
20.25
-
-
... More
Provision for Automation,Instrumentation, & Chlorination work including installation of DG set with laying of OFC cable inconnection with Provision of 24x7 Water Supply to Khandagiri Bari, Sradhapalli basti, Ghatikia Village, Tapoban Basti & Chala Sahi Basti etc. BBSR (Phase - II)
-
-
-
... More
Supply installation testing & commissioning of PLC panel with following technical specification i,e - CRCA steel sheet Enclosure size :H- 2100mm xW- 800mmxD-400mm.PLC S7 -1200 CPC- 01 No, DI -30 Nos, DO -26 Nos,AI -18 Nos,AO - 4 Nos,RS 485 (Modbus RTU) Module, which can connect to 30 devices. SMPS 24 DC 10 A- 02 Nos,Type - 2-1 P + N 15 KA Surge protection device - 1 No. 1 KVA isolation Transformer - 1 No.MCB DP 16 A as required.MCB DP -10 A as required.MCB DP - 6A as required .Panel cooling fan with filter - 01 No.Panel light -02 Nos,Illuminated Led Lamp - 1 No.Mushroom Head Emg .Stop Push Button - 1 No.Electronics Hooter, 96x96mm-1 No. 24 V DC LRD Fuse terminals as required.240 V AC Led fuse terminal as required .Signal isolator for Analog inputs. wiring with PVC duct & C channel - 01 Set etc. complete (All switch gear & control gear make -Siemens/Schneider/L&t & 10 modules approved make (PLC- Siemens/Schnider/ABB/Mitsubishi/Equivalent make with approval of authority)
1
-
-
... More
Supply, Installation, Programming, Testing & Commissioning of SCADA including supply of all materials T&P and Labour Etc, Having -1500 Tag SCADA Software with Hard/Soft licence Key(Make- Schneider, Siemense,Allen Bradley). Server Grade CPU Having win-10 Proffessional, Intel Quad core Xeon 3.5 Ghz Prrocessor, DDR4 8gb Ram, 500 gb 7200 Rpm HDD-1 Nos,USB based keyboard - 1Nos, USB based Optical Mouse- 1Nos, Having 3Years manugacturer warrenty( Make- HP,DELL,LENOVO),32'' HD IPS monitor - 1Nos ,Having 3Years manugacturer warrenty( Make- Lg,Samsung,Acer,Benq), A4 size laserPrinter - 1Nos (Make- HP,Canon,Epson), Wooden Computer table - 1 Nos , Preparation of P&I diagram, Creation of Multi visualization screen for Process control,alarm managenent, Historical and realtime process trend, Daily reporting etc.All completed as per electrical specification and as per direction of EIC.
1
-
-
... More
Supply, Installation, Testing Wiring & Commissioning of Head main with D/B Alluminium BusBar and interconnection with copper wire and lugs. Having 36KA 200A 4P MCCB with Spreader link and Extended ROM- 2Set, MCCB AUX.+Trip Add Block-2NOS,Indicator R.Y.B-3NOS,Multifunction Meter with CT250/5A-1Set, PLC CompactibleAMF Cum Manual changeover panel for 125 KVA DG set with required cable from DG to AMF & AMF to main control panel Made out of 2MM C.R sheet, Duely Powder coated, Floor mounted, Front operated, complete with Rated Alluminium BusBar and interconnection with copper wire and lugs. Having 200A changeover -1 nos, AC1 Rating 200A 4Pole Power Contactor-2Nos, 12VDC Auxilary contactor 2No+2NC- 5 Nos, On delay Timer-2 Nos, ATS relay -1 Nos, 4A sp MCB-6, 10A DP MCB -2Nos, 4A FP MCB-2 Nos, BAsic Multifunctionmeter-1 nos, CT200/5A -3, Auto/Manual Selector Switch -2Nos, Start /Stop Push Bottom Switch -1set, RYB indicator- 6Nos, ON/OFF Indicator-5, 2.5MM control Terminal- 10 Nos, All switchgear and controlgear make- Siemens,schneider,ABB,L&T,LEGRAND . All completed as per electrical specification and as per direction of EIC.
1
-
-
... More
Supply, Installation, Testing Wiring & Commissioning PLC Compatable of 37KW Variable Freqency Drive Panel , Made out of 2MM C.R sheet, Duely Powder coated, Floor mounted, Front operated, complete with Rated Alluminium BusBar and interconnection with copper wire and lugs. Having 63A MPCB including , RYB indicator -1set, Basic MultiFunction- 1Nos, 4A control Mcb - 3Nos, CT100/5A - 3Nos,3Ph Ammeter - 1Nos,CT 100/5 - 3Nos, 6A DP MCB-1Nos,22KW heavy duty VFD-1Nos , AUxilary contactor 2NO+2NC -4 NOs, 2No+2NC Addon block- 4Nos,. Start/stop/reset push Buttom- 1Set, ON/OFF/Trip Indictor - 1set, Cooling Fan with filter - 1nos,10 mm Power Terminal-4 Nos, 2.5mm Control Terminal -10 Nos, All switchgear and controlgear make- Siemens/schneider/ABB/L&T/LEGRAND/Equivalent make with approval of the authority. All completed as per electrical specification and as per direction of EIC.
-
-
-
... More
For 4 Nos 30 HP Pump Set at K-3(B) Pumping station -
4
-
-
... More
Supplying all labour, materials and tools and plants for installation , testing and commissioning of Horizontal Split case double stage centrifugal pump set KBL/WIPL/ Wilo (M&P)/Grundfos make with Pump rated discharge 144 m3/ Hour , Pump rated Head- 37 mtr with Mechanical Seal of make John Chrone/ Flowserve/ Egle Burgman with Pump material of construction, Casing- Cast iron, Impeller-SS-CF8, Neck ring-SS-CF8, Shaft SS-410 , Shaft sleeves -SS410, stuffing box packing mechanical , Gland Sealing - Mechanical Seal with Offered motor CGL/ ABB/ Siemens/ Marathon/Havels /Havels 18.50 KW RPM 1475/4 pole , Motor Characteristics 415+- 10%, 50 Hz +_ 5 %, S1 Duty , TEFC-SCR, IP55, IE3 efficiency class insulation class F/B , Ambient temp 50* C confirming to IS/IEC ,with acessories Base frame, coupling, coupling guard, Companion flanges etc all complete as per direction of Engineer in charge.
4
-
-
... More
Supply, Installation, Testing Wiring & Commissioning of Lighting Distribution Panel Made out of 2MM C.R sheet, Duely Powder coated, Floor mounted, Front operated, complete with Rated Alluminium BusBar and interconnection with copper wire and lugs. Having 63A 4P MCB-1 Nos,32A FP MCB-2 Nos, 32A DP MCB-1 Nos, 16A DP MCB- 3Nos, 10A DP MCB-1Nos, All switchgear and controlgear make- Siemens,schneider,ABB,L&T,LEGRAND. All completed as per electrical specification and as per direction of EIC.
1
-
-
... More
Supply of Level indicator to be installed at UGR and ESR with following specification Range= 0 to 8 mtr Type =Radar Power Supply=24V DC Out Put=4-20mA Make-E & H/ABB/VEGA/WIKA/Equivalent make with approval of authority
1
-
-
... More
Supply of Pressure transmeter to be installed at 100/150/250/200 /300mm dia delivery main with following technical specification
-
-
-
... More
i,e.Range up to 5 kg/cm2,Type-Sensor,Power Supply-24 DC,Out put-4 to 20mA,Make-E & H/ABB/VEGA/WIKA/Equivalent make with approval of authority
5
-
-
... More
Installation of 1 nos level indicator & 5 Nos pressure sensor including supply of all required materials like SS mountingplate,laying of PVC pipe, excavation of soil,arrangement for making drill on DI/CI pipe for safe installation of instruments with providing Engineering support for programmingetc. as per direction of Engineer-In-charge
6
-
-
... More
Supply, installation of chemical earthing with crystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag - 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all complete as per the site requirement.
12
-
-
... More
Supply,Installation and commissioning of 4-U rack with power cable and AC 3 pin connection for eletrical instrument as per specification,including cost of all labours, T&P etc. all complete as per the direction of Engineer-in-charge.
1
-
-
... More
Supply, Installation & Testing of the 45x6mm Earthing strip along the Cable Trenches or Cable Trays or Fixing to Walls (by Using Proper Size of Spacer and Saddles ) or Structures or buried individually in paved/ unpaved areas (minor civil work like chipping of paved surface finishing after laying grounding loop, etc. Welding at joints, providing anti-corrosive paint for Welded portion, clamping & necessary hardware for connection, excavation & refilling, etc. including provision for risers at places as per approved drawings, all labour to be considered in installation work ) & all other required materials complete as per the drawings/site in- charge. Including Earthing saddles, clamps ,terminal ,lugs etc.
60
-
-
... More
OFC: Supply and Laying of 12core unarmoured Optical fibre cable (OFC :fiber glass with F-G 62.5/125micron, 2.6DB/KM F600) to various sites through HDPE pipe, prelaying testing of each cable drum for each fibre and taking the OTDR traces, submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/ Site Engineer, blowing of OFC through previously laid HDPE, jointing / splicing of OFC, post installation testing of OFC for each fibre for each drum laid & taking OTDR traces, submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/ SiteEngineer as per the scope, specifications and directions of Engineer-in-charge/ Site Engineer.
900
-
-
... More
Supply and Installation of pre-fabricated GRP Joint Box with Iid size 600 x 600 x 600 mm for OFC loop and termination as per telecom specification and directions of Site Engineer / Engineer-in Charge.
4
-
-
... More
Supply,Installation and commissioning of single phase 1KVA on line UPS in pure sine wave with dry shell battery for 2hrs. Backup, rack and should be maintenance free battery including cables power plug,switch etc.as per specification.including cost of all labour,material,transportation to site,T & P etc. all complete as per direction of Engineer in charge.
2
-
-
... More
Supply,Installation and commissioning of OFC connection switch with Modem complete as per requirement.
2
-
-
... More
Supply fitting & fixing of G.I Perforated Cable Tray of size 200mm x 50mm x 50mm and mounting brackets .(1.2mm)
50
-
-
... More
Supply fitting & fixing of G.I Perforated Cable Tray of size 100mm x 50mm x 50mm and mounting brackets .(1.2mm)
50
-
-
... More
Supplying all materials labour & T & P for fitting & fixing of following electrical/electronics devices etc. comple in all respect as per direction of Engineer in charge.
At Kalinga Nagar K - 3(B) Pump House
Type 2-1 P+N 15KVA Surge protection device
2
-
-
... More
Supply & laying of 1.5 Sqmm 7 core Copper Armoured Control Cable (Havels/Polycab/Finolex/Eequivelent make with approval of the authority)
50
-
-
... More
Supply & laying of 50 sqmm 3.5 core Alluminium Armoured Cable including socketing Jointing etc complete. (Havels/Polycab/Finolex/Eequivelent make with approval of the authority)
120
-
-
... More
Supply & laying of 120 sqmm 3.5 core Alluminium Armoured Cable including socketing Jointing etc complete. (Havels/Polycab/Finolex/Eequivelent make with approval of the authority)
130
-
-
... More
Supply & laying of 1.5 Sqmm 3 core Copper Armoured Control Cable (Havels/Polycab/Finolex/Eequivelent make with approval of the authority)
70
-
-
... More
Supply & laying of 1.5 Sqmm 5 core Copper Armoured Control Cable (Havels/Polycab/Finolex/Eequivelent make with approval of the authority)
300
-
-
... More
Supply & laying of 1.5 Sqmm 2 pair Copper Overall shielded Armoured instrument Cable (Havels/Polycab/Finolex/Eequivelent make with approval of the authority)
120
-
-
... More
Supply of 6 sqmm 4 core Copper Armoured Cable (Havels/Polycab/Finolex/Eequivelent make with approval of the authority)
30
-
-
... More
Supply , installation, testing and commissioning of the following capacity 3Phase, 415 Volts, 50 Hz, 0.8 pf Silent DG set consisting of Electronic Governor with Engine . The installation include following works such as:
1) Required earth Work Excavation in all kinds of soil.
2) C:C.1:3:6 with sand filling (100mm thickness)
3) (1:1 1/2:3) RCC should have volume of 3 cums. 4) Earthing 2nos. of 1.5x1.5X2.5 with necessary betonite mud filling good earth Charcoal & common salt with a layer of 700mm each including 2nos. of earth Electroed including its PVC/RCC Cap. Make:- Mahindra Power/ Kirloskar/Ashok Leyland/Sterling/Koel Green Jackson/ Cumin Powers/ Greaves Cotton/ Greaves/Equivalent make with approval of authority
-
-
-
... More
125 KVA Capacity
5
-
-
... More
62.5 KVA Capacity
2
-
-
... More
50.0 KVA Capacity
3
-
-
... More
45.0 KVA Capacity
2
-
-
... More
30.0 KVA Capacity
2
-
-
... More
Supply and installation of Online Chlorine & PH analyser with following technical specification:-( ABB / E & H / Forbes Marshall/Equivalent make with approval of the authority) with following accessories.
1
-
-
... More
Chlorine Sensor with RS 485 Modbus Output
-
-
-
... More
Battery (4x 19AH)
-
-
-
... More
5 Micron Cartridge Filter
-
-
-
... More
4G Modem with GSM/ Ethernet / Fibre Output
-
-
-
... More
FRP / Stainless steel Enclosure
-
-
-
... More
Flow cell for Chlorine Sensor
-
-
-
... More
PH Sensor
-
-
-
... More
Supply, Installation, testing and commissioning of chemical feed pump with standby arrangement 0 to 100 in propertion to 4 to 20 mA signal.100 SPM@75Hz and 67 SPM @50Hz Motor frequency range=15 to 75 Hz Auto/manual, Remote,while running or at rest,5:1 Turn down ratio,Over and above there will be provision for manual stroke variation. The disch piping and fitting starting from the pump flange upto the tank nozzle including VFD 3 phase input and 415 volt 3 phase output and will have a rating of 3 HP. Inverter will receive a signal of 4 to 20 mA signal with electric installation etc. all complete
1
-
-
... More
Supplying of control panel with VFD for running of chlorine dosing pump and motor etc compatable with SCADA & PLC system etc all complete as per direction of Engineer-In-charge
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%