Water Corporation Of Odisha Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 2,86,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_WATCO_102116_1Bid Award Id
ViewTender No
WATCO (W)-47(5)/2023-24 Dtd.01.03.2024Tender Authority
Water Corporation Of Odisha ViewPurchaser Address
-Website
http://http://watcoodisha.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
All kinds of soil
15.49
-
-
Supplying all labour and T&P for excavation of founation in laterite rock or any hard rock (other than granite or disintigrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department as per direction of Engineer-in-charge.
-
-
-
Laterite rock
6.64
-
-
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty ,additional charges along with DMF &EMF, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.
13.24
-
-
Supplying all materials, labour, T&P and providing cement concrete(1:3:6) with 40cm size crusher broken black hard granite metal including watering , curing, conveyance of all materials to work site, payment of royalty ,additional charges along with DMF &EMF contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.
8.44
-
-
Supplying all materials, labour, T&P and Providing Brick work with Fly Ash Bricks 25cm x 12cm x 8cm size having crushing strength not Less than 75kg/cm² with dimensional tolerance ± 8 percent in Cement Mortar (1:6) after immersing the bricks for hours in water before use including splays, cutting, circular moulding ,corbelling ,champhering and similar such type of works,scaffolding,watering ,curing ,the work including cost of conveyance & royalty ,additional charges along with DMF &EMF ,sundries & watering for curing & supervision charges, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge .
-
-
-
F.P.
10.07
-
-
Supplying all materials, labour, T&P and Providing Brick work with Fly Ash Bricks 25cm x 12cm x 8cm size having crushing strength not Less than 75kg/cm² with dimensional tolerance ± 8 percent in Cement Mortar (1:6) after immersing the bricks for hours in water before use including splays, cutting, circular moulding ,corbelling ,champhering and similar such type of works,scaffolding,watering ,curing ,the work including cost of conveyance & royalty ,additional charges along with DMF &EMF ,sundries & watering for curing & supervision charges, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge .
-
-
-
Superstructure
18.02
-
-
Supplying all labour, materials ,T&P and providing Reinforced Cement concrete (1:1½:3) with crusher broken hard granite chips on 12mm size RCC works including cost of conveyance & royalty ,additional charges along with DMF &EMF,sundries , watering ,curing &lifting &laying concrete at a height of 5mtr. Maximum,contractor profit & labour cess complete etc all complete (Excluding cost of reinforcement & centering & shuttering)
10.58
-
-
Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete.
-
-
-
Foundation
7.88
-
-
Plinth Band
12.75
-
-
Lintel
2.16
-
-
Chhaja & Roof slab
50.96
-
-
Beam
12.75
-
-
Column
12.8
-
-
M.S reinforcement of grade Fe500 as per IS:1786 for RCC work including cutting,bending,and typing the grills and placing in position including cost of binding wire 18 to 20 guage & M.S reinforcement.
10.58
-
-
Supplying all materials,labour, T&P and making 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size crusher broken granite chips. including cost of conveyance, royalty ,additional charges along with DMF &EMF,sundries, watering for curing, racking out joints, rounding of corners ,scaffolding,contractor profit & labour cess etc, all complete as per the direction of engineer-in-charge.
42.24
-
-
Supplying all materials,labour,T&P and making 16mm thick cement plaster in cement mortar(1:6) for brick or stone masonry work for brick workincluding watering, curing, conveyance of all materials to worksite, payment of royalty ,additional charges along with DMF &EMF,contractor profit & labour cess as per the direction of engineer-in-charge.
103.01
-
-
Supplying all materials,labour,T&P and making 12mm thick cement plaster in cement mortar (1:6) for brick work including watering, curing, conveyance of all materials to worksite, payment of royalty ,additional charges along with DMF &EMF,contractor profit & labour cess as per the direction of engineer-in-charge.
49.2
-
-
Supplying all materials, labour, T&P and providing 6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment including watering , curing conveyance of all materials to work site, payment of royalty ,additional charges along with DMF &EMF,contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge
39.55
-
-
Supplying all materials labour T&P for providing M.S. Grill/ Pipe as per following size as per specification.all complete.
360
-
-
Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 mm in height dimension comprising of UPVC multi-chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded Interlocks, EPDM gasket, wool pile, zinc alloy(white powder coated) touch lock with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), GI fastners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc, After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size. (Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 + 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm).
2.88
-
-
Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make confirming to IS 13755 with application of polymer modified quick set cement based water resistant adhesive confirming to IS 15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer in charge
64.4
-
-
Providing fitting and fixing up fixed ventilators by using OEL aluminum anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as Tapered clip for fixing up 5mm thick Glass and jointing angle No. 1855 etc.
-
-
-
ventilator
1.08
-
-
Supplying all labour materilas and T&P for providing cement washing two coats.
191.75
-
-
Finishing plastered surfaces of walls with Berger Synthetic putty (interior wall puty) wall puty and making smooth to receive painting.
49.2
-
-
Provision for Plastic emulsion painting two coats to walls with over a coat of primer of approved shade on plastered surface to give an even shade in all heights including cost, conveyance, taxes of all materials, cost of all labour, T&P safety belts, sundries etc. as required for the work complete .
49.2
-
-
Providing wall painting 2 coats with weather paint of approved shade on wall surface over a coat of water bound wall cement primer to give an even shade including cost of brushes& putty including cost, conveyance, royalities etc, all complete.
103.01
-
-
Supplying all materials , labour & T & P for Painting of M.S. pipe, Gate, Door & windows with 2 coats of enamel paint over a coat of primer including cost of all labour, materials with all taxes, lead, T&P etc all complete.
7.92
-
-
Supplying all labour & T & P for removal of debrises from site including loading and unloading charges etc all complete.
1
-
-
PLC Room
-
-
-
Providing fitting and fixing up partition walling OEL aluminum anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as Tapered clip for fixing up 9mm thick pre laminated board (Nova pan Make) in bottom portion & 6mm thick plain glass in top portion and jointing angle No. 1855 etc.
18.72
-
-
Providing fitting, fixing of Al. door with powder coated OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 5mm thick plain glass in top portion 1/3rd with 9 mm thick pre laminated board (Nova pan Make) 2/3rd in bottom portion fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc.complete.
2
-
-
Providing, fitting, fixing up false ceiling of approved design and drawing in all floors with G.I Section on 4 walls to be fixed by means of steel screw and PVC plug and the G.l. grid 2’-0”x2’-0” to be suspended from ceiling by using 12.5mm thick Fire Line Gypsum Board including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
20
-
-
Enamel Painting two coats with any approved paint including cost of all labour, materials T & P with taxes, transportation etc all complete in Ground Floor.
43.4
-
-
Cost of 1.50 ton capacity A.C. With Stabilizer (5KW)
1
-
-
Ceiling Fan with 48" blade (ISI Mark)
2
-
-
For Electricfication, light arrangement, 15amp plug, copper wire, switch etc
1
-
-
Provision for EM Flow Meter , Control Valves ,Globe valves and Chlorine System at Sahebangala under WATCO Section, Modipara
-
-
-
Supply of electric powered electromagnetic full bore type IP 68 fully welded Flanged type water flow meter of Pulse DC type of Flow tube SS304, coil housing & electrodes SS316, SS ring type grounding etc with IP 68 signal converter remote mounting,input power supply 24V DC 4 - 20 mA,programable LCD display to show Actual flow rate, totalised flow, flow direction, flow velocity,conductivity with + or - 0.5 % accuracy etc & provision to diagnostics empty pipe detection, coil temperature, coil resistance etc & compatable to data communication modules with masibus & communication the data to remote SCADA station for live monitoring where ever required including providing data cable & power cable required as per site condition .The standard calibration certificate & guarantee certificate for flow meter & electromagnetic signal converter to be given for minimum one year from the date of installation.The Approved Make : (ABB,Krone,Immersion,Bermad,E & H) including cost of material with all taxes transporataion to Site/Storage with insurance.
-
-
-
100mm dia Flow meter
3
-
-
150mm dia Flow meter
2
-
-
200mm dia Flow meter
4
-
-
Installation charges
-
-
-
100mm dia Flow meter
3
-
-
150mm dia Flow meter
2
-
-
200mm dia Flow meter
4
-
-
Supply of DI Pilot Altitude Flow Valve of Double CHAMBER(Globe Type) with orfice plate for purpose to close valve at a maximum water level of ESR & to open to refill the ESR when the water level in the ESR at lowers.Altitude Control Valve should be worked at minimum pressure 1kg/cm2 .An altitude control valve controls the level of a tank. The altitude valve will remain open while the tank is not full and it will close when the tanks reaches its maximum level. The opening and closing of the valve will work without external power source (electric, pneumatic, or man power), it will work automatically,The body, Spool, & cover will be DI ASTM A-536 standard,Spring,steam, Jam Nut ,Cover bolt & cover washer should be SS , DI /SS Diaphragm plate,Nytril/Nylon diaphragm ,Bronze cover bushing,Seat plate & ring .The Approved Make : (VAG/SINGER/CLA/BURMAD-700/DOROT-S300)with 2 nos solenoid including cost of material with all taxes transporataion to Site/Storage with insurance.
-
-
-
200mm ND
1
-
-
Installation charges
-
-
-
200mm ND
1
-
-
Supply of double chamber DI Control valve (globe type) with solenoid , hydraulic operated with stem amd Positioner for feed back switch, selonoid valve, integral orifice plate assembly, differential control, reverse flow control, restriction orifice Body PN-1.6 can be integrated with PLC pannel for operation with a minimum Pressure in upstream 0.2 kg/cm2 to a maximum pressure of 8 kg/cm2 of The Approved Make : CLA,DOROT S-300,SINGER,BERMAD-700,VAG to control water supply including cost of material with all taxes transporataion to Site/Storage with insurance.
-
-
-
100mm dia PN16 Flow Control Valve with 2 nos solenoid
3
-
-
150mm dia PN16 Flow Control Valve with 2 nos solenoid
2
-
-
200mm dia PN16 Flow Control Valve with 2 nos solenoid
3
-
-
Installation charges
-
-
-
100mm dia PN16 Flow Control Valve with 2 nos solenoid
3
-
-
150mm dia PN16 Flow Control Valve with 2 nos solenoid
2
-
-
200mm dia PN16 Flow Control Valve with 2 nos solenoid
3
-
-
Supplying all materials Labour & T & P for Fixing Globe valve, OS & Y Type Rising Spindle Bolted Bonnet with Parabolic Disc for Manual Flow Control, Moc :- ASTM A216 Gr. WCB, SS410 Disc Nut Stem & Back Sheet Bush, with Hand Wheel & Nut, Flanged End With Pilot Thread Bore on Both Flange for Pressure.
-
-
-
100mm dia D/F Globe Valve
20
-
-
Supplying, fitting, fixing & testing of mechanical flow meter with local reading and communication port with software & hardware arrangement including necessary electrical wiring with testing all complete
-
-
-
100mm dia Flow meter
20
-
-
Chlorine System
-
-
-
Provision for supply testing and commissioning of chemical feed pump 0 to 100 in propertion to 4 to 20 mA signal.100 SPM@75Hz and 67 SPM @50Hz Motor frequency range=15 to 75 Hz Auto/manual, Remote,while running or at rest,5:1 Turn down ratio,Over and above there will be provision for manual stroke variation. The disch piping and fitting starting from the pump flange upto the tank nozzle including VFD 3 phase input and 415 volt 3 phase output and will have a rating of 3 HP. Inverter will receive a signal of 4 to 20 mA signal with electric installation etc. all complete
1
-
-
Installation charges of chemical feed pump with storage tank & accessories including all piping arrangement and hire charges of Hydra etc all complete
1
-
-
Supplying of control panel with VFD for running of chlorine dosing pump and motor etc compatable with SCADA & PLC system etc all complete as per direction of Engineer-In-charge
2
-
-
Supply, of On line Chlorine Analyser with following technical specification i,e.Single Channel free Chlorine Analyser,Transmitter-Aqua4trans DualChannel,FRC sensor FMNSX5 with 10 feet cable(with manual PH compensetion),Complete system pre mounted on plate with FTCs foe sensors,Power supply110-240VAC,Trans 2" pipe/wall /Panel mount type,RangeFRC-0-5 ppm,Complete plate mounted system,(The Analyzer must be pre wired on plate,we will provide only power supply & pipe connection system)
1
-
-
Supply & Installation of PH analyser with following specifications:- Measurement-pH/ORP(Platinum), Temperature range-0-600 C (32 to 1400 F),Maximum Pressure-6 Bar(90PSI), (ABB/E&H/Forbes Marshal)
1
-
-
Laying of Clear water Rising Main for connection With ESR to Distribution Lines Sahebangala under WATCO Section, Modipara
-
-
-
Supplying all labour, T&P for dismantling of Bituminous courses of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately including cost of contractor profit & labour cess etc all complete as per direction of Engineer-in-charge.
-
-
-
For pipe line
10.45
-
-
Supplying all labour, T&P for dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres,stacking serviceable and unserviceable materials separately including cost of contractor profit & labour cess etc all complete as per direction of Engineer-in-charge
-
-
-
For pipe line
20.9
-
-
Supplying all labour, T&P and earth work in excavation in all kinds of soil within/Disintegrated Rock initial lead of 50m lead & initial lift of 1.50m. including rough dressing breaking clods & laying in layers not exceeding 0.30m. In depth, leveling the bed, using pans, vessels for slushy soil & including sundries supervision charges & labour cess etc, as per the direction of Engineer-in-charge.
-
-
-
In All kinds of soil
72.42
-
-
In Disingrated Rock
8.05
-
-
Supplying, installation, testing & Commissioning of DI Resilient seated Glandless Gate Valve with double flanged ends for water works purposes conforming to IS 14846-2000 for the following rating and nominal diameters as per specification complete(including cost of nut bolt, washer,rubber inseration sheet & cost of C.I. Sluice valve (VAG/TALIS/AVK)
-
-
-
250mm dia .S/VP.N.1.6 (with wheel)
2
-
-
Supplying & Fixing single Air Relief Valve conforming to IS 14845 : 2000 for water works purposes for the following diameters including drilling the water main (Cast Iron pipes with metal straps) as per specification complete and direction of Engineer-in-charge.
-
-
-
25mm dia Single Air Valve D.I. Tamper Proof Kinetic Air valve
2
-
-
Supplying all materials, labour, T&P and fixing Double Air Relief Valve conforming to IS 14845 : 2000 for water works purposes for the following diameters including drilling the water main (Cast iron pipes with metal straps),as per specification & contractor profit & labour cess etc all complete as per the direction of Engineer-in-charge.complete
-
-
-
100mm dia Double Air Valve
1
-
-
Supplying & Laying in trenches MS pipes of all Classes conforming to IS:3589 - 2001 & IS:3601 - 2006 of the following outside diameter as per specification complete. (Earthwork in trenches, jointing of pipes,specials and fittings to be measured separately)including cost of pipe,conveyance of all materials to worksite,contractor profit & labour cess etc all complete as per direction of Engineer-in-charge.
-
-
-
273 mm O.D.M.S.ERW pipe(6.30mm thick)
190
-
-
250 mm flange (12mm thick)
10
-
-
250x250x250 MS plain TEE
2
-
-
250x150x250 MS plain TEE
1
-
-
Supplying all materials, labour, T&P for flame cutting and facing of MS plate/ D.I. or pipes upto 8mm thick including cost of all labor, material,conveyance to worksite,contractor profit & labour cess for following plate thickness all complete as per specification and direction of Engineer-in-Charge.
-
-
-
For M.S. Pipe
40.29
-
-
Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes and fittings at site by using welding generator including testing of joints, as per specification complete and direction of Engineer-in-charge.
-
-
-
For M.S. Pipe
40.29
-
-
Providing & fixing of CI mechanical joint collar conforming to IS:13382/92 to flanged ends of Cast Iron Pipes or Ductile Iron Pipes including testing of joints as per specification complete and direction of Engineer-in-charge.
-
-
-
250mm dia C.I mechanical joint collar
6
-
-
Providing & fixing of Flanged joint conforming to IS:13382/92 to flanged ends of Cast Iron Pipes or Ductile Iron Pipes including testing of joints as per specification complete and direction of Engineer-in-charge.(including nuts & bolts)
-
-
-
250mm dia
5
-
-
Mending the damaged C.C./Bituminous Road
-
-
-
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty ,additional charges along with DMF &EMF, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.
-
-
-
For Pipe line
20.9
-
-
Supplying all labour, T&P, and materials and making cement concrete (1:2:4) with 12mm size crusher broken black hard granite chips including all cost of conveyance , sundries, watering for curing ,supervision charge,royalty ,additional charges along with DMF &EMF contractor profit& labour cess etc.all complete as per the direction of Engineer-in-charge.
15.68
-
-
Supplying all labour, T&P and Filling in foundation and plinth with excavated materials including watering and ramming,contractor profit & labour cess as directed by the Engineer-in-charge
48.45
-
-
Supplying all labour, T&P and disposal of surplus earth by mechanical means within 5.00km lead including loading,unloading & labour cess etc all complete as per the direction of Engineer-in-charge.
32.02
-
-
Supplying all labour,consumble, T&P and dewatering of Water using Diesel engine including cost of consumable, hire charges of disel Pump,conveyance to work site ,contractor profit & labour cess as per direction of Engineer-in-charge.(5HP Diesel Pump)
12
-
-
Supplying all materials, labour T&P for Construction of valve Chamber as per drawing including earthwork in excavation, backfilling in 150 mm layers, watering & consolidating, pumping & bailing out water, shoring, strutting & planking as required, disposal of surplus earth, dressing the site etc complete in all respects with all labour , material & T&P as per specification and direction of the Engineer-in-Charge.
-
-
-
Construction of Brick masonry Sluice valve chamber of int.size(1.20x1.20 x1.50) (Each)
4
-
-
Construction of Positive suction pump house at Sahebangala under WATCO Section, Modipara
-
-
-
Earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth & as per direction of the engineer–in–charge.
-
-
-
1st depth
132.75
-
-
2nd depth
132.75
-
-
3rd depth
44.1
-
-
Earth work of excavationof founation in laterite rock or any hard rock (other than granite or disintigrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department
-
-
-
3rd depth
29.4
-
-
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty ,additional charges along with DMF &EMF, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.
66.06
-
-
Supplying all materials, labour, T&P and providing cement concrete(1:3:6) with 40cm size crusher broken black hard granite metal including watering , curing, conveyance of all materials to work site, payment of royalty ,additional charges along with DMF &EMF contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge. .
11.03
-
-
Supplying all labour , T&P and removing surplus earth /debrise by mechanical means within 5 K.M radious etc all complete as per the direction of EIC.
272.94
-
-
Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) brick masonary in super structure
-
-
-
In foundation and plinth
2.45
-
-
in superstructure
20.26
-
-
R.C.C work in ground floor of M-25 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .
67.46
-
-
Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete.
-
-
-
R.C.C. Foundation, Plinth Band, Footings, Bases of Columns, Mass Concrete & Precast Slabs etc.
18
-
-
R.C.C. Walls and Fins
189
-
-
RCC columns & beams
27.75
-
-
RCC walkway slabs
14.68
-
-
RCC beams
89.49
-
-
RCC lintel
7.95
-
-
RCC chajja
5.67
-
-
roof slab Double Stage
7.02
-
-
Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.
67.46
-
-
6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment ( for inside area)
305.11
-
-
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.C/C and stainless square pipe bracing of size case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
9.03
-
-
Supplying all materials, labour, T&P and fixing of Fixing KOTA Tile in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete polishing etc all complete. as per the direction of the Engineer in charge.
61.05
-
-
Supplying all materials,labour and T&P for frame work for single gantry rail with colums , beams ismb 200X 100MM of joist & 16 mm. Thk.gusset plate,and channel, necessary welding ,gas cutting for manufacturing the whole structure including fitting and fixing od 5 MT pulley block with chain at pump houses etc all complete as per the direction of Engineer in charge.
1
-
-
16 mm. thick cement plaster (1 :6) over brick or stone masonry (Inner Walls)
109.12
-
-
12 mm. thick cement plaster (1 :6) over brick or stone masonry (Outer Wall)
109.12
-
-
2.5cm. thick grading concrete (1:2:2) on roof slab with 6mm. Size on new work crusher broken Granite chips
52.51
-
-
Provision for Plastic emulsion painting two coats to walls with over a coat of primer of approved shade on plastered surface to give an even shade in all heights including cost, conveyance, taxes of all materials, cost of all labour, T&P safety belts, sundries etc. as required for the work complete .
414.23
-
-
Supplying all materials labour T&P for providing M.S. Grill/ Grill gate /Pipe as per following size as per specification.all complete.
944.4
-
-
Providing , fitting & fixing up UPVC ( Unplasticized Poly vinyle Chloride ) window (sliding type) with 5 mm clear float glass of LG profile as per approved specification including all cost conveyance labour T & P etc complete as per direction of Engineer in Charge.
5.76
-
-
Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour ,materials with all taxes, lead ,T & P etc all complete .
2.63
-
-
Cement concrete (1:2:4) with 12cm. Size crusher broken hard Granite chips including cost of all labour ,materials with all taxes, lead ,T & P etc all complete .
5.78
-
-
Recessed / Surface wiring to light point / fan point /Exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated single core multi strand copper conductor of ISI marked with 20 mm dia non-m , MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire -Finolex/L&T/Anchor/Havells/V-Guard)
-
-
-
Light Points, Group - A
8
-
-
Light Points Group - B
6
-
-
5A Plug Point
6
-
-
Fan Point (Group - A)
6
-
-
Supplying all materials labour & T & P for fitting & fixing of following electrical installations including testing & commissioning etc. complete as per direction of Engineer in Charge.
-
-
-
Step up modular regulator for Fan
3
-
-
15watt LED Bulb.
8
-
-
1200mm Ceiling Fan Havells make Fusion
3
-
-
Electric 200mm Exhaust Fan (Havells Ventil air DB)
3
-
-
Titanio Pro LED Tube Light -18W (Double side connection)
6
-
-
32A Double Pole MCB.
2
-
-
5 Amp switch
22
-
-
5 Amp socket
6
-
-
Ceiling Rose -
6
-
-
Angle Holder
8
-
-
2.50 Sqmm 3 core copper armoured Cable
48
-
-
Providing weather coat painting two coats over a coat of primer of approved shade of walls including cost conveyance of all materials, etc. all complete as per specification & direction of Engineer-in-charge.
261.68
-
-
Supplying all materials labour T&P for providing fitting & fixing of MS plate 6mm thick over the door grills as per following size as per specification.all complete.
840.74
-
-
Supplying all labour, materials and tools and plants for enamel painting two ioatrs over a coat of primer on MS doors/grills as per the approved shade and colour as per direction of Engineer in charge
56.27
-
-
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately
6.3
-
-
Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge.
15.75
-
-
Supplying filling in foundation & plinth with sand well watered & rammed including cost, conveyance, royalties, taxes all labour, T & P etc all complete as per specification and direction of Engineer-in-charge.
12.6
-
-
Supplying all labour tools and plants for laying and fixing of 95sqmm armoured cable all complete ( labour only)
30
-
-
Supplying all materials, labour, and T&P for providing Puddle Collar as per relevant IS specifications including testing transportation to site etc. all complete as per the specifications and directions of Engineer-in-charge.
-
-
-
400mm dia CI Puddle Collar 1.00 mtr long
1
-
-
Supplying all labour and tools and plants for Dismantling of RCC walls by means of core cutting of 150mm dia to avoid further damage to adjacent concrete and reinfcorement so that the reinforcement can be rewelded properly by chiselling with electric breaker weighing up to 7.50Kg with capacity of 20 joules impact to concrete at least leaving a weldable length that core should be taken to size they cut slabs to size so that can easily be removed from site by head load or by chain hauled from inside all complete
-
-
-
( 0.60mt diax 0.45mtr thickness) - 1 nos
1
-
-
Supplying all materials labour & T & P for making water proof Micro Concrete of any reputed brand (Preferable Perma Polycrete/jaipax) for R.C.C. works including hoisting and laying etc. complete as per direction of Engineer in charge.
0.14
-
-
Supplying all labour, materials. T&P for for sealing the Joint usingPerma Polyseal (POLYSULPHIDE SEALANT) in 50mm x 25mm size groove including all cost. conveyance. wastages & taxes etc. all complete.
3.77
-
-
Provision for Installation of pump set with interconnection arrangements and Boundary Wall at Pump House, Sahebangala under WATCO Section, Modipara
-
-
-
Supply of Three Phase wide Voltage Range centrifugal Pump set capable to discharge 65 LPS against total head range of 35 mtr etc all complete as per direction of Engineer-in-Charge (40 HP) (WILO/KSB/LUBI/WPIL).
160
-
-
Supply of mechanical seals set- in drive and Non drive end (SS410) for Horizontal Centrifugal Pumpset 30 KW
4
-
-
Construction of RCC foundation for pump sets in All completed as per specification and as per direction of EIC.
4
-
-
Supply, Installation, Testing Wiring & Commissioning PLC Compatable of 30KW Variable Freqency Drive Panel for Group-I, Made out of 2MM C.R sheet, Duely Powder coated, Floor mounted, Front operated, complete with Rated Alluminium BusBar and interconnection with copper wire and lugs. Having 63A MPCB including , RYB indicator -1set, Basic MultiFunction- 1Nos, 4A control Mcb - 3Nos, CT100/5A - 3Nos,3Ph Ammeter - 1Nos,CT 100/5 - 3Nos, 6A DP MCB-4Nos,30KW heavy duty VFD-1Nos , AUxilary contactor 2NO+2NC -4 NOs, 2No+2NC Addon block- 4Nos,. Start/stop/reset push Buttom- 1Set, ON/OFF/Trip Indictor - 1set, Cooling Fan with filter - 1nos,10 mm Power Terminal-4 Nos, 2.5mm Control Terminal -10 Nos, All switchgear and controlgear make- Siemens,schneider,ABB,L&T,LEGRAND. All completed as per electrical specification and as per direction of EIC.
1
-
-
Supply, Installation, Testing Wiring & Commissioning PLC Compatable of 30 KW Variable Freqency Drive Panel for Group-II, Made out of 2MM C.R sheet, Duely Powder coated, Floor mounted, Front operated, complete with Rated Alluminium BusBar and interconnection with copper wire and lugs. Having 125A 4P MCCB-1Nos, 63A MPCB including , RYB indicator -1set, Basic MultiFunction- 1Nos, 4A control Mcb - 3Nos, CT100/5A - 3Nos,, 6A DP MCB-4Nos,30KW heavy duty VFD-1Nos , AUxilary contactor 2NO+2NC -4 NOs, 2No+2NC Addon block- 4Nos,. Start/stop/reset push Buttom- 1Set, ON/OFF/Trip Indictor - 1set, Cooling Fan with filter - 1nos,10 mm Power Terminal-4 Nos, 2.5mm Control Terminal -10 Nos, All switchgear and controlgear make- Siemens,schneider,ABB,L&T,LEGRAND. All completed as per electrical specification and as per direction of EIC.
1
-
-
Supply, Installation, Testing Wiring & Commissioning of 82.5 KVA AMF panel including Supply of All materials T&P and Labour Etc. All completed as per electrical specification and as per direction of EIC.
1
-
-
Supply, Installation, Testing Wiring & Commissioning of PLC Compactible 30KW VFD Panel including Supply of All materials T&P and Labour Etc. All completed as per electrical specification and as per direction of EIC.
4
-
-
Supply, Installation, Testing & Commissioning of Lighting Distribution panel including Supply of All materials T&P and Labour Etc. All completed as per electrical specification and as per direction of EIC.
1
-
-
Design, engineering, procurement of materials and bought out components, manufacturing, assembly at shop, inspection, testing and painting at manufacturer’s works, packing, supply, unloading /transportation/ handling/storage at site, assembly at site, installation including touch-up painting, hook-up, pre-commissioning, commissioning, inspection and testing of the complete of the following capacity (Prime Power) DG sets along with AMF Panels, Acoustic enclosure, supply of all erection & commissioning spares, special tools and tackles (as required),instrumentation, three phase DG set Disel operated having automatic feeder panel with display contoller which can communicate oil level , engine temperature, voltage, current, battery voltage,frequency hour meter, engine oil temp & should be liquid cooled engine. The controller should be fixed on a separate wall with connecting cable upto 15 mtr all Auxiliaries, Exhaust system & silencer, Fuel Tank, Fuel piping , cable of required size, required foundation, good quality(L& T or equivalent) change over,metering panel with CT Meter all complete etc. with inspection certificate from electrical inspector and as as per site condition & direction of Engineer in charge.
-
-
-
200 KVA
2
-
-
Supply, installation of chemical earthing with crystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag - 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all complete as per the site requirement.
12
-
-
Supply, Laying,testing,glanding & termination of Power Cable including Supply of All materials T&P and Labour Etc. All completed as per electrical specification and as per direction of EIC.
-
-
-
Supply of 150 sqmm x 3.5 Core AL.Armourded cable
161
-
-
Labor charges for Laying and termination of 150 sqmm x 3.5 Core CU. Armoured Cable
160
-
-
Supply of 16 sqmm x 3 Core AL.Armourded cable
160
-
-
Labor charges for Laying and termination of 16 sqmm x 3 Core AL.Armourded cable
160
-
-
57 mm DC Gland
4
-
-
25 mm DC Gland
4
-
-
150 mm AL socket
16
-
-
160 mm AL socket
32
-
-
Counstruction Of Compound Wall
200
-
-
Counstruction Of cement concrete internal road of 3.5 mtr width
160
-
-
Counstruction Of DG Room
72
-
-
Supply and installation of transformer with all other ancillary work and electric fees Including in All completed as per specification and as per direction of EIC.
-
-
-
250 KVA
2
-
-
Improvement of Water supply to Sahebangla by Zoning of Distribution System Under WATCO Section, Modipara
-
-
-
Supplying all labour, T&P for dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres,stacking serviceable and unserviceable materials separately including cost of contractor profit & labour cess etc all complete as per direction of Engineer-in-charge.
-
-
-
Interconnection
53.25
-
-
Supplying all labour, T&P and earth work in excavation in all kinds of soil within initial lead of 50m lead & initial lift of 1.50m. including rough dressing breaking clods & laying in layers not exceeding 0.30m. In depth, leveling the bed, using pans, vessels for slushy soil & including sundries supervision charges & labour cess etc, as per the direction of Engineer-in-charge.
228.45
-
-
Supplying & Laying in trenches MS pipes of all Classes conforming to IS:3589 - 2001 & IS:3601 - 2006 of the following outside diameter as per specification complete. (Earthwork in trenches, jointing of pipes,specials and fittings to be measured separately)including cost of pipe,conveyance of all materials to worksite,contractor profit & labour cess etc all complete as per direction of Engineer-in-charge.
-
-
-
110mm O.D.M.S.ERW pipe (4.50mm thick)
120
-
-
Supplying all materials, labour, T&P for flame cutting and facing of MS/D.I. plate or pipes upto 8mm thick including cost of all labor, material,conveyance to worksite,contractor profit & labour cess for following plate thickness all complete as per specification and direction of Engineer-in-Charge.
-
-
-
For M.S. Pipe
16.59
-
-
Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes and fittings at site by using welding generator including testing of joints, as per specification complete and direction of Engineer-in-charge.
-
-
-
For M.S. Pipe
16.59
-
-
Supplying of M.S. Flanges ,fittings confirmig IS specification with granding, polishing, testing,contractor profit & Labour cess etc all complete as per specification .
-
-
-
100mm dia M.S X 10mm thick
30
-
-
100x100x100mm dia M.S plain tee
4
-
-
150x100x150mm dia M.S plain tee
3
-
-
Providing flanged joints conforming to IS:3114-1994 to flanged Cast Iron pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification complete
-
-
-
100mm dia
15
-
-
Providing & fixing of CI mechanical joint collar conforming to IS:13382/92 to flanged ends of Cast Iron Pipes or Ductile Iron Pipes including testing of joints as per specification complete .
-
-
-
150mm dia C.I mechanical joint collar
6
-
-
100mm dia C.I mechanical joint collar
8
-
-
Supplying, installation, testing & Commissioning of DI Resilient seated Glandless Gate Valve with double flanged ends for water works purposes conforming to IS 14846-2000 for the following rating and nominal diameters as per specification complete(including cost of nut bolt, washer,rubber inseration sheet & cost of C.I. Sluice valve (VAG/TALIS/AVK)
-
-
-
100mm Glandless Sluice Valve PN-1.6 (With Wheel)
12
-
-
Fixing of 100 mm dia water flow mter of pulse DC type of flow tube SS304 compartable to data communication modules & communication the dat to remote SCADA station for live monitoring where ever required including providing data cable & power cable required as per site condition.The standard calibration certificate & gurantee certificate for flow meter & electromagnetic signal convertor to ne given for minimum on year from the data of installation (Earth work in trenches, jointing of pipes,specials and fittings to be measured and paid separately)
-
-
-
Labour Charge only
20
-
-
Fixing of 100 mm dia Globe Valve with double flanged ends for water works purposes conforming to IS 13114-1991 for the following rating and nominal diameters as per specification complete(including cost of nut bolt, washer,rubber inseration sheet & cost of C.I. Sluice valve
-
-
-
Labour Charge only
20
-
-
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty ,additional charges along with DMF &EMF, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.
28.95
-
-
Supplying all labour, T&P, and materials and making cement concrete (1:2:4) with 12mm size crusher broken black hard granite chips including all cost of conveyance , sundries, watering for curing ,supervision charge,royalty ,additional charges along with DMF &EMF contractor profit& labour cess etc.all complete as per the direction of Engineer-in-charge.
5.67
-
-
Supplying all materials, labour, T&P and providing cement concrete(1:3:6) with 40cm size crusher broken black hard granite metal including watering , curing, conveyance of all materials to work site, payment of royalty ,additional charges along with DMF &EMF contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.
-
-
-
S/V Chamber
10.5
-
-
Supplying all materials, labour, T&P and Providing Brick work with Fly Ash Bricks 25cm x 12cm x 8cm size having crushing strength not Less than 75kg/cm² with dimensional tolerance ± 8 percent in Cement Mortar (1:6) after immersing the bricks for hours in water before use including splays, cutting, circular moulding ,corbelling ,champhering and similar such type of works,scaffolding,watering ,curing ,the work including cost of conveyance & royalty ,sundries & watering for curing & supervision charges, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge .
-
-
-
S/V Chamber
66
-
-
Supplying all labour, materials ,T&P and providing Reinforced Cement concrete (1:1½:3) with crusher broken hard granite chips on 12mm size RCC works including cost of conveyance & royalty ,additional charges along with DMF &EMF,sundries , watering ,curing &lifting &laying concrete at a height of 5mtr. Maximum,contractor profit & labour cess complete etc all complete (Excluding cost of reinforcement & centering & shuttering)
-
-
-
S/V Chamber
11.52
-
-
Supplying all materials, labour, T&P and providing rigid and Smooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including conveyance of all materials to Work site, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.
-
-
-
S/V Chamber
64.2
-
-
Supplying all materials, labour, T&P and providing M.S. reinforcement for Reinforced cement concrete work including cutting, bending, binding and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of the Engineer-in-charge.
9.79
-
-
Supplying all materials,labour,T&P and making 12mm thick cement plaster in cement mortar (1:6) for brick work including watering, curing, conveyance of all materials to worksite, payment of royalty ,additional charges along with DMF &EMF,contractor profit & labour cess as per the direction of engineer-in-charge.
-
-
-
S/V Chamber
294.6
-
-
Supplying all labour, T&P and disposal of surplus earth by mechanical means from work site to suitable place within 5.00km lead including loading ,unloading & labour cess etc all complete as per specification and direction of Engineer-in-charge.
281.7
-
-
Laying of distribution pipeline for House Connection Shifting at Sahebangala under WATCO Section, Modipara
-
-
-
Supplying all labour, T&P for dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres,stacking serviceable and unserviceable materials separately including cost of contractor profit & labour cess etc all complete as per direction of Engineer-in-charge.
-
-
-
For Pipe line
176.4
-
-
Supplying all labour, T&P and earth work in excavation in all kinds of soil within initial lead of 50m lead & initial lift of 1.50m. including rough dressing breaking clods & laying in layers not exceeding 0.30m. In depth, leveling the bed, using pans, vessels for slushy soil & including sundries supervision charges & labour cess etc, as per the direction of Engineer-in-charge.
-
-
-
For Pipe line
411.6
-
-
Supplying all materials labour, T&P and Laying in trenches High Density Polyethylene Pipes and specials of following outside diameter and class 1 to 3 jointing by fusion welding method inlcuding testing as per specification conforming to IS: 4984-1995 with required socket tail piece, M.S blank flange, required rubbeer insertion, nut bolts etc at dead end and testing as per specification and direction of Engineer-in-charge.(pipe to be supplied by contractor with pre & post delivery inspection certificate from CIPET and manufacturing test certificate from the manufacturer.)
-
-
-
110 mm PE Pipe Grade PE 80 PN 6.0
980
-
-
Supplying of the following sizes of Ductile Iron fittings & Specials confirming to IS Specification including cost of contractor profit & labour cess etc all complete as per direction of Engineer-in-charge.
-
-
-
Cost of specials
0.68
-
-
Supplying all labour, T&P and Laying in trenches double socket Cast Iron /Ductile Iron specials conforming to IS:1538 - 1993 (Part-x) of the following nominal diameter as per specification complete. (Earth work in trenches, jointing of pipes,specials and fittings to be measured and paid separately)
0.68
-
-
Supplying, installation, testing & Commissioning of DI Resilient seated Glandless Gate Valve with double flanged ends for water works purposes conforming to IS 14846-2000 for the following rating and nominal diameters as per specification complete(including cost of nut bolt, washer,rubber inseration sheet & cost of C.I. Sluice valve (VAG/TALIS/AVK)
-
-
-
100mm dia S/V
10
-
-
100mm dia Globe valve ( Fitting charge only)
1
-
-
Supplying & Laying in trenches MS pipes of all Classes conforming to IS:3589 - 2001 & IS:3601 - 2006 of the following outside diameter as per specification complete. (Earthwork in trenches, jointing of pipes,specials and fittings to be measured separately)including cost of pipe,conveyance of all materials to worksite,contractor profit & labour cess etc all complete as per direction of Engineer-in-charge.
-
-
-
110mm O.D.M.S.ERW pipe (4.50mm thick)
10
-
-
Supplying all materials, labour, T&P for flame cutting and facing of MS plate or pipes upto 8mm thick including cost of all labor, material,conveyance to worksite,contractor profit & labour cess for following plate thickness all complete as per specification and direction of Engineer-in-Charge.
2.07
-
-
Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes and fittings at site by using welding generator including testing of joints, as per specification complete and direction of Engineer-in-charge.
2.07
-
-
Providing flanged joints (Full-faced Flanges) conforming to IS:3114-1994 for jointing pvc pipes and other conventional pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertion as per specification complete.
-
-
-
100 mm diameter
5
-
-
Supplying of M.S. Flanges of 10mm thick M.S.plate confirmig IS specification with granding, polishing, testing,contractor profit & Labour cess etc all complete as per specification .
-
-
-
100mm dia M.S X 10mm thick
5
-
-
Supplying all labour for Fixing of ferrule conforming to IS : 2692-1978 of the following nominal bore including drilling the water main ( Cast Iron pipes or pipes with the metal straps ) as per Specification complete.
10
-
-
Supplying all labour, T&P and Filling in foundation and plinth with excavated materials including watering and ramming, contractor profit & labour cess as directed by the Engineer-in-charge.
-
-
-
For Pipe line
314.09
-
-
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty ,additional charges along with DMF &EMF, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.
-
-
-
For Pipe Line
176.4
-
-
Supplying all labour, T&P, and materials and making cement concrete (1:2:4) with 12mm size crusher broken black hard granite chips including all cost of conveyance , sundries, watering for curing ,supervision charge,royalty ,additional charges along with DMF &EMF contractor profit& labour cess etc.all complete as per the direction of Engineer-in-charge.
-
-
-
110 mm PE Pipe
117.6
-
-
Supplying all labour, T&P and disposal of surplus earth by mechanical means from work site to suitable place within 5.00km lead including loading ,unloading & labour cess etc all complete as per specification and direction of Engineer-in-charge.
-
-
-
pipe Volume
358.31
-
-
Design, Construction, Testing & Commissioning of OGR including all works such as soil investigatio, excavation, required footing of raft/pile, back filling & disposal of earth, RCC & PCC of required grade, shuttering, brick work, painting, finishing, connection pipes upto 10m beyond tank structure, valves fitting, expansion joint, expansion bellow, ultrasonic level transmitter, lighting arrester etc. including supply of all labours, materials, tools & paints including testing & commissioning etc. all complete as per Specification and direction of E.I.C.
-
-
-
0.40 ML Capacity OGR at Sahebbangla
400000
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements