Water Corporation Of Odisha Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Water Corporation Of Odisha - WATCO Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date14 Oct 2024
Closing Date29 Oct 2024
Tender Amount₹ 30,75,08,000
Costs
EMD
₹ 30,75,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_WATCO_105541_2Bid Award Id
ViewTender No
WATCO (W)-10/2024-25 Dtd.04.10.2024Tender Authority
Water Corporation Of Odisha ViewPurchaser Address
-Website
http://http://watcoodisha.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supply of ISI Marked Centrifugally Cast (Spun) K - 9,K-7 Class Ductile Iron Socket & Spigot Pressure Pipes in standard length with internal cement mortar lining and external bituminous coating conforming to IS 8329:2000 and its subsequent amendments & ISI Marked SB/EPDM Rubber Gasket (IS:5382) for Push-on type Flexible Joints of DI Pipes,including inspection, transportation, handling, loading, unloading, stacking, etc. all complete as per specification and direction of Engineer-in-charge. (Cost of rubber gaskets shall be inclusive in the cost of pipes of different diameters.)
-
-
-
200mm dia DI (K9)
80
-
-
250mm dia DI (K9)
1879
-
-
Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.
-
-
-
200mm dia DI (K9)
2.88
-
-
250mm dia DI (K9)
61.04
-
-
Cutting concrete road of grannualar course of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.
-
-
-
200mm dia DI (K9)
3.84
-
-
250mm dia DI (K9)
81.38
-
-
Supplying all labour, T&P and earth work excavation in following kinds of soil within initial lead of 50m & initial lift of 1.50m including rough fressing breaking clods and laying in layers not exceeding 0.30m. In depth, levelling the bed, using pans, vessels for slushy soil and including sundries supervision charges &labour cess etc, as per direction of Engineer-in-charge.In all kinds of soil(100% as per division)
1298.03
-
-
Supplying all labour, T&P and laying in trenches Centrifugally Cast (Spun) ductile Iron pressure, socket and spigot pipes Class K-9 / K-7 with cement mortar lining and bituminus painting conforming to IS:8329-2000 of the following nominal diameter excluding cost of pipe and rubber ring as per specification complete. (Earthwork intrenches to be measured and paid for separately)
-
-
-
Special
-
-
-
200mm dia DI (K9)
1.2
-
-
250mm dia DI (K9)
41.13
-
-
Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete .
-
-
-
200mm diameter
16
-
-
250mm diameter
341
-
-
A. Fixing cast iron DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK
B. For Installation/Replacement of Sluice Valve in Existing Water Supply Pipe Line & Newly Proposed Pipeline for controlling flow & scouring Purpose.
-
-
-
200mm Dia Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6)
1
-
-
250mm Dia Sluice With Hand Wheel & Without bypass arrangements.(P.N 1.6)
2
-
-
Fixing Tamper Proof Kinetic Air Valve conforming to IS 14845 : 2000 for water works purposes for the following diameters including drilling the water main (Cast iron pipes with metal straps) as per specification complete (80mm dia Tamper Proof Kinetic Double Air Valve)
3
-
-
Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete including RCC Cover Slab (per each)
-
-
-
Construction of brick masonry sluice valve Chamber of size (1mx1mx1.5m)
3
-
-
Construction of Thrust Block of RCC M-20 with surface reinforcement.
1
-
-
Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.
-
-
-
200mm dia M.S.Pipe (6.30mm thick)
10
-
-
200mm dia M.S Flange (25mm thick)
4
-
-
200mm dia x 45' M.S. Bend
1
-
-
250mm dia M.S.Pipe (6.30mm thick)
30
-
-
250mm dia M.S Flange (25mm thick)
8
-
-
250mm dia x 45' M.S. Bend
5
-
-
Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete
8.16
-
-
Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set including pocket cutting and welding complete.
8.16
-
-
Supplying all materials,labour and T&P and making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification all complete.
-
-
-
200mm dia Flange joints
2
-
-
250mm dia Flange joints
5
-
-
Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge.
1106.9
-
-
Supplying all materials, labour, T&P and filling in pipe line trenches with sand well watered and rammered including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc all complete as per specifiation and direction of Engineer-in-charge.
-
-
-
200mm diameter
5
-
-
250mm diameter
106.8
-
-
Supplying all materials, labour, T&P and providing cement concrete(1:3:6) with 4cm size crusher broken black hard granite metal including watering, curing, conveyance of all materials to work site, payment of royalty & labour cess etc all complete as per specifications and direction of Engineer-in-charge.(Mending the C.C Road)
-
-
-
200mm diameter
3.4
-
-
250mm diameter
71.2
-
-
Supplying all materials, labour, T&P and providing cement concrete(1:2:4) with 12mm size crusher broken hard granite chips including all cost of conveyance, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as p[er the direction of Engineer-in-charge.
-
-
-
200mm diameter
3.4
-
-
250mm diameter
71.2
-
-
Supplying all materials, labour, and T&P for removal/carriage of excavated earth from site to a distance 5 km away etc all complete and as per the specifications and directions of engineer-in-charge.
340.3
-
-
ESR
-
-
-
Design, Supply, Construction, Testing & Commisioning of Elevated Service Reservoirs (ESR's) & UGR at Brajarajnagar Town all complete as per the direction of Engineer-in-charge.
-
-
-
Proposed ESR ZONE -2
Staging - 30m(800KL)
800000
-
-
Proposed ESR ( 500 KL) of ZONE-3
Staging - 30m
500000
-
-
Proposed UGR( 300 KL) of ZONE-6
300000
-
-
Proposed ESR ( 700 KL) of ZONE-7
Staging - 22m
700000
-
-
Distribution Network (DI-K7),Fittings & Civil Works (Zone-1)
-
-
-
Supply & Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately)(including cost of D.I.K-7 pipe & Tyton Rubber Ring)
-
-
-
100mm dia DI (K7)
551
-
-
Cutting asphalt or bituminous/Concrete road and Concrete road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of Engineer-in-charge.
-
-
-
Considering 20% as bituminous road
11.02
-
-
Considering 70% as concrete road
38.57
-
-
Supplying all labour, T&P and earth work excavation in following kinds of soil within initial laed of 50m & initial lift of 1.50m including rough fressing breaking clods and laying in layers not exceeding 0.30m. In depth, levelling the bed, using pans, vessels for slushy soil and including sundries supervision charges &labour cess etc, as per direction of Engineer-in-charge
-
-
-
In all kinds of soil(90% as per division)
228.11
-
-
In D.I Rock(10% as per division)
25.35
-
-
Supply & Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately)(including cost of D.I.K-7 pipe & Tyton Rubber Ring)
-
-
-
100mm dia DI (K7)
551
-
-
Supplying of the following sizes of Ductile Iron fittings & Specials confirming to IS Specification including cost of contractor profit & labour cess etc all complete as per direction of Engineer-in-charge.
-
-
-
Material Cost
4.24
-
-
Laying Cost
4.24
-
-
Construction of Thrust Block of RCC M-20 with surface reinforcement.( 1.00 x 1.00 x 1.00m)(for 100mm to 400mm size pipe)
18
-
-
Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete . (Labour Only)
-
-
-
100mm diameter
111
-
-
Fixing cast iron DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK
-
-
-
100mm dia
4
-
-
Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete including RCC Cover Slab (per each)
-
-
-
Construction of brick masonry sluice valve Chamber of size (1.0x1.0x1.5mtr)
4
-
-
Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge.
-
-
-
Backfilling in Pipe trenches-
(Total Excavation Qty - Pipe volume)
202.3
-
-
Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.
-
-
-
100mm dia M.S.Pipe (4.50mm thick)
600
-
-
100mm dia M.S. Flange.(12mm thick)
75
-
-
100mm dia 90⁰ M.S Bend
60
-
-
Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for all complete as per specification and direction of Engineer-in-Charge.
71.64
-
-
Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set including pocket cutting and welding complete.
71.64
-
-
Supplying all materials,labour and T&P and making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification all complete.
-
-
-
100mm dia Flange joints
75
-
-
Filling in foundatin and plinth with sand watered and rammed including cost of sand & labour.
41.3
-
-
Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .
-
-
-
100mm dia DI (K7)
27.55
-
-
Supplying all materials, labour, T&P and providing cement concrete(1:2:4) with 12mm size crusher broken hard granite chips including all cost of conveyance, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as p[er the direction of Engineer-in-charge.
27.55
-
-
Supplying all materials, labour, and T&P for removal/carriage of excavated earth from site to a distance 5 km away etc all complete and as per the specifications and directions of engineer-in-charge.
155.85
-
-
Supply of mechanical full bore type IP 68 fully welded flanged type water flow meter ,flow direction,flow velocity conductivity with + or -0.5% accuracy etc & provision to diagnostic empty pipe detection,coil temperature,coil resistance etc & compatable to data communication modulus with masibus & communication the data to remote SCADA station for live monitoring where ever required including providing data cable & power cable required as per site condition.
40
-
-
Distribution Network (DI-K7),Fittings & Civil Works (Zone-2)
-
-
-
Supply & Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately)(including cost of D.I.K-7 pipe & Tyton Rubber Ring)
-
-
-
150mm dia DI (K7)
9
-
-
200mm dia DI (K7)
446
-
-
250mm dia DI (K7)
651
-
-
300mm dia DI (K7)
293
-
-
Cutting asphalt or bituminous/Concrete road and Concrete road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of Engineer-in-charge.
-
-
-
Considering 20% as bituminous road
45.04
-
-
Considering 70% as concrete road
157.64
-
-
Supplying all labour, T&P and earth work excavation in following kinds of soil within initial laed of 50m & initial lift of 1.50m including rough fressing breaking clods and laying in layers not exceeding 0.30m. In depth, levelling the bed, using pans, vessels for slushy soil and including sundries supervision charges &labour cess etc, as per direction of Engineer-in-charge
-
-
-
In all kinds of soil(90% as per division)
827.73
-
-
In D.I Rock(10% as per division)
91.97
-
-
Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately)(including cost of D.I.K-7 pipe & Tyton Rubber Ring)
-
-
-
Laying Cost
-
-
-
100mm dia DI (K7)
9
-
-
150mm dia DI (K7)
446
-
-
200mm dia DI (K7)
651
-
-
250mm dia DI (K7)
293
-
-
Supplying of the following sizes of Ductile Iron fittings & Specials confirming to IS Specification including cost of contractor profit & labour cess etc all complete as per direction of Engineer-in-charge.
-
-
-
Material Cost
26.7
-
-
Laying Cost
26.7
-
-
Construction of Thrust Block of RCC M-20 with surface reinforcement.( 1.00 x 1.00 x 1.00m)(for 100mm to 400mm size pipe)
15
-
-
Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete . (Labour Only)
-
-
-
150mm diameter
2
-
-
200mm diameter
90
-
-
250mm diameter
131
-
-
300mm diameter
59
-
-
Fixing cast iron DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK
-
-
-
200mm dia
2
-
-
250mm dia
4
-
-
300mm dia
2
-
-
Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete including RCC Cover Slab (per each)
-
-
-
Construction of brick masonry sluice valve Chamber of size (1.0x1.0x1.5mtr)
8
-
-
Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge.
740.3
-
-
Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.
-
-
-
150mm dia M.S.Pipe (6.30mm thick)
10
-
-
150mm dia M.S. Flange.(12mm thick)
5
-
-
150mm dia 90⁰ M.S Bend
1
-
-
200mm dia M.S.Pipe (6.30mm thick)
80
-
-
200mm dia M.S. Flange.(12mm thick)
20
-
-
200mm dia 90⁰ M.S Bend
15
-
-
250mm dia M.S.Pipe(6.30mm thick)
300
-
-
250mm dia M.S. Flange.
75
-
-
250mm dia 90⁰ M.S Bend
60
-
-
300mm dia M.S.Pipe(6.30mm thick)
100
-
-
300mm dia M.S. Flange.
20
-
-
300mm dia 90⁰ M.S Bend
20
-
-
Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for all complete as per specification and direction of Engineer-in-Charge.
207.84
-
-
Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set including pocket cutting and welding complete.
207.84
-
-
Supplying all materials,labour and T&P and making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification all complete.
-
-
-
150mm dia Flange joints
5
-
-
200mm dia Flange joints
20
-
-
250mm dia Flange joints
75
-
-
300mm dia Flange joints
20
-
-
Filling in foundatin and plinth with sand watered and rammed including cost of sand & labour.
135.12
-
-
Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .
90.08
-
-
Supplying all materials, labour, T&P and providing cement concrete(1:2:4) with 12mm size crusher broken hard granite chips including all cost of conveyance, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as p[er the direction of Engineer-in-charge.
90.08
-
-
Supplying all materials, labour, and T&P for removal/carriage of excavated earth from site to a distance 5 km away etc all complete and as per the specifications and directions of engineer-in-charge.
607.3
-
-
Supply of mechanical full bore type IP 68 fully welded flanged type water flow meter ,flow direction,flow velocity conductivity with + or -0.5% accuracy etc & provision to diagnostic empty pipe detection,coil temperature,coil resistance etc & compatable to data communication modulus with masibus & communication the data to remote SCADA station for live monitoring where ever required including providing data cable & power cable required as per site condition.
35
-
-
Distribution Network (DI-K7),Fittings & Civil Works (Zone-3)
-
-
-
Supply & Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately)(including cost of D.I.K-7 pipe & Tyton Rubber Ring)
-
-
-
100mm dia DI (K7)
119
-
-
150mm dia DI (K7)
2860
-
-
200mm dia DI (K7)
428
-
-
250mm dia DI (K7)
389
-
-
Cutting asphalt or bituminous/Concrete road and Concrete road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of Engineer-in-charge.
-
-
-
Considering 20% as bituminous road
106.51
-
-
Considering 70% as concrete road
372.79
-
-
Supplying all labour, T&P and earth work excavation in following kinds of soil within initial laed of 50m & initial lift of 1.50m including rough fressing breaking clods and laying in layers not exceeding 0.30m. In depth, levelling the bed, using pans, vessels for slushy soil and including sundries supervision charges &labour cess etc, as per direction of Engineer-in-charge
-
-
-
In all kinds of soil(90% as per division)
1817.38
-
-
In D.I Rock(10% as per division)
201.93
-
-
Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately)(including cost of D.I.K-7 pipe & Tyton Rubber Ring)
-
-
-
Laying Cost
-
-
-
100mm dia DI (K7)
119
-
-
150mm dia DI (K7)
2860
-
-
200mm dia DI (K7)
428
-
-
250mm dia DI (K7)
389
-
-
Supplying of the following sizes of Ductile Iron fittings & Specials confirming to IS Specification including cost of contractor profit & labour cess etc all complete as per direction of Engineer-in-charge.
-
-
-
Material Cost
47.61
-
-
Laying Cost
47.61
-
-
Construction of Thrust Block of RCC M-20 with surface reinforcement.( 1.00 x 1.00 x 1.00m)(for 100mm to 400mm size pipe)
22
-
-
Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete . (Labour Only)
-
-
-
100mm diameter
24
-
-
150mm diameter
572
-
-
200mm diameter
86
-
-
250mm diameter
78
-
-
Fixing cast iron DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK
-
-
-
150mm dia
10
-
-
200mm dia
2
-
-
250mm dia
2
-
-
Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete including RCC Cover Slab (per each)
-
-
-
Construction of brick masonry sluice valve Chamber of size (1.0x1.0x1.5mtr)
14
-
-
Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge.
1664.87
-
-
Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.
-
-
-
100mm dia M.S.Pipe (4.50mm thick)
100
-
-
100mm dia M.S. Flange.(12mm thick)
20
-
-
100mm dia 90⁰ M.S Bend
15
-
-
150mm dia M.S.Pipe (6.30mm thick)
500
-
-
150mm dia M.S. Flange.(12mm thick)
125
-
-
150mm dia 90⁰ M.S Bend
60
-
-
250mm dia M.S.Pipe(6.30mm thick)
150
-
-
250mm dia M.S. Flange.
55
-
-
250mm dia 90⁰ M.S Bend
25
-
-
Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for all complete as per specification and direction of Engineer-in-Charge.
217.74
-
-
Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set including pocket cutting and welding complete.
217.74
-
-
Supplying all materials,labour and T&P and making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification all complete.
-
-
-
100mm dia Flange joints
20
-
-
150mm dia Flange joints
125
-
-
250mm dia Flange joints
55
-
-
Filling in foundatin and plinth with sand watered and rammed including cost of sand & labour.
321.33
-
-
Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .
214.22
-
-
Supplying all materials, labour, T&P and providing cement concrete(1:2:4) with 12mm size crusher broken hard granite chips including all cost of conveyance, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as p[er the direction of Engineer-in-charge.
214.22
-
-
Supplying all materials, labour, and T&P for removal/carriage of excavated earth from site to a distance 5 km away etc all complete and as per the specifications and directions of engineer-in-charge.
1366.32
-
-
Supply of mechanical full bore type IP 68 fully welded flanged type water flow meter ,flow direction,flow velocity conductivity with + or -0.5% accuracy etc & provision to diagnostic empty pipe detection,coil temperature,coil resistance etc & compatable to data communication modulus with masibus & communication the data to remote SCADA station for live monitoring where ever required including providing data cable & power cable required as per site condition.
100
-
-
Distribution Network (DI-K7),Fittings & Civil Works (Zone-4)
-
-
-
Supply & Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately)(including cost of D.I.K-7 pipe & Tyton Rubber Ring)
-
-
-
100mm dia DI (K7)
664
-
-
200mm dia DI (K7)
721
-
-
Cutting asphalt or bituminous/Concrete road and Concrete road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of Engineer-in-charge.
-
-
-
Considering 20% as bituminous road
34.91
-
-
Considering 70% as concrete road
122.19
-
-
Supplying all labour, T&P and earth work excavation in following kinds of soil within initial laed of 50m & initial lift of 1.50m including rough fressing breaking clods and laying in layers not exceeding 0.30m. In depth, levelling the bed, using pans, vessels for slushy soil and including sundries supervision charges &labour cess etc, as per direction of Engineer-in-charge
-
-
-
In all kinds of soil(90% as per division)
654.5
-
-
In D.I Rock(10% as per division)
72.72
-
-
Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately)(including cost of D.I.K-7 pipe & Tyton Rubber Ring)
-
-
-
Laying Cost
-
-
-
100mm dia DI (K7)
664
-
-
200mm dia DI (K7)
721
-
-
Supplying of the following sizes of Ductile Iron fittings & Specials confirming to IS Specification including cost of contractor profit & labour cess etc all complete as per direction of Engineer-in-charge.
-
-
-
Material Cost
15.96
-
-
Laying Cost
15.96
-
-
Construction of Thrust Block of RCC M-20 with surface reinforcement.( 1.00 x 1.00 x 1.00m)(for 100mm to 400mm size pipe)
28
-
-
Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete . (Labour Only)
-
-
-
100mm diameter
133
-
-
200mm diameter
145
-
-
Fixing cast iron DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK
-
-
-
100mm dia
2
-
-
200mm dia
2
-
-
Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete including RCC Cover Slab (per each)
-
-
-
Construction of brick masonry sluice valve Chamber of size (1.0x1.0x1.5mtr)
4
-
-
Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge.
588.85
-
-
Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.
-
-
-
100mm dia M.S.Pipe (4.50mm thick)
600
-
-
100mm dia M.S. Flange.(12mm thick)
75
-
-
100mm dia 90⁰ M.S Bend
40
-
-
200mm dia M.S.Pipe (6.30mm thick)
300
-
-
200mm dia M.S. Flange.(12mm thick)
50
-
-
200mm dia 90⁰ M.S Bend
35
-
-
Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for all complete as per specification and direction of Engineer-in-Charge.
210.67
-
-
Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set including pocket cutting and welding complete.
210.67
-
-
Supplying all materials,labour and T&P and making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification all complete.
-
-
-
100mm dia Flange joints
75
-
-
200mm dia Flange joints
50
-
-
Filling in foundatin and plinth with sand watered and rammed including cost of sand & labour.
114.69
-
-
Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .
76.46
-
-
Supplying all materials, labour, T&P and providing cement concrete(1:2:4) with 12mm size crusher broken hard granite chips including all cost of conveyance, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as p[er the direction of Engineer-in-charge.
76.46
-
-
Supplying all materials, labour, and T&P for removal/carriage of excavated earth from site to a distance 5 km away etc all complete and as per the specifications and directions of engineer-in-charge.
470.02
-
-
Supply of mechanical full bore type IP 68 fully welded flanged type water flow meter ,flow direction,flow velocity conductivity with + or -0.5% accuracy etc & provision to diagnostic empty pipe detection,coil temperature,coil resistance etc & compatable to data communication modulus with masibus & communication the data to remote SCADA station for live monitoring where ever required including providing data cable & power cable required as per site condition.
50
-
-
Distribution Network (DI-K7),Fittings & Civil Works (Zone-5)
-
-
-
Supply & Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately)(including cost of D.I.K-7 pipe & Tyton Rubber Ring)
-
-
-
100mm dia DI (K7)
151
-
-
Cutting asphalt or bituminous/Concrete road and Concrete road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of Engineer-in-charge.
-
-
-
Considering 20% as bituminous road
3.02
-
-
Considering 70% as concrete road
10.57
-
-
Supplying all labour, T&P and earth work excavation in following kinds of soil within initial laed of 50m & initial lift of 1.50m including rough fressing breaking clods and laying in layers not exceeding 0.30m. In depth, levelling the bed, using pans, vessels for slushy soil and including sundries supervision charges &labour cess etc, as per direction of Engineer-in-charge
-
-
-
In all kinds of soil(90% as per division)
62.51
-
-
In D.I Rock(10% as per division)
6.95
-
-
Supply & Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately)(including cost of D.I.K-7 pipe & Tyton Rubber Ring)
-
-
-
100mm dia DI (K7)
151
-
-
Supplying of the following sizes of Ductile Iron fittings & Specials confirming to IS Specification including cost of contractor profit & labour cess etc all complete as per direction of Engineer-in-charge.
-
-
-
Material Cost
1.16
-
-
Laying Cost
1.16
-
-
Construction of Thrust Block of RCC M-20 with surface reinforcement.( 1.00 x 1.00 x 1.00m)(for 100mm to 400mm size pipe)
2
-
-
Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete . (Labour Only)
-
-
-
100mm diameter
31
-
-
Fixing cast iron DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK
-
-
-
100mm dia
1
-
-
Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete including RCC Cover Slab (per each)
-
-
-
Construction of brick masonry sluice valve Chamber of size (1.0x1.0x1.5mtr)
1
-
-
Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge.
55.44
-
-
Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.
-
-
-
100mm dia M.S.Pipe (4.50mm thick)
100
-
-
100mm dia M.S. Flange.(12mm thick)
25
-
-
100mm dia 90⁰ M.S Bend
15
-
-
Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for all complete as per specification and direction of Engineer-in-Charge.
17.91
-
-
Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set including pocket cutting and welding complete.
17.91
-
-
Supplying all materials,labour and T&P and making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification all complete.
-
-
-
100mm dia Flange joints
25
-
-
100mm dia Flange joints
-
-
-
Filling in foundatin and plinth with sand watered and rammed including cost of sand & labour.
11.33
-
-
Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .
7.55
-
-
Supplying all materials, labour, T&P and providing cement concrete(1:2:4) with 12mm size crusher broken hard granite chips including all cost of conveyance, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as p[er the direction of Engineer-in-charge.
7.55
-
-
Supplying all materials, labour, and T&P for removal/carriage of excavated earth from site to a distance 5 km away etc all complete and as per the specifications and directions of engineer-in-charge.
42.71
-
-
Supply of mechanical full bore type IP 68 fully welded flanged type water flow meter ,flow direction,flow velocity conductivity with + or -0.5% accuracy etc & provision to diagnostic empty pipe detection,coil temperature,coil resistance etc & compatable to data communication modulus with masibus & communication the data to remote SCADA station for live monitoring where ever required including providing data cable & power cable required as per site condition.
20
-
-
Distribution Network (DI-K7),Fittings & Civil Works (Zone-6)
-
-
-
Supply & Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately)(including cost of D.I.K-7 pipe & Tyton Rubber Ring)
-
-
-
150mm dia DI (K7)
115
-
-
200mm dia DI (K7)
1036
-
-
Cutting asphalt or bituminous/Concrete road and Concrete road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of Engineer-in-charge.
-
-
-
Considering 20% as bituminous road
34.24
-
-
Considering 70% as concrete road
119.85
-
-
Supplying all labour, T&P and earth work excavation in following kinds of soil within initial laed of 50m & initial lift of 1.50m including rough fressing breaking clods and laying in layers not exceeding 0.30m. In depth, levelling the bed, using pans, vessels for slushy soil and including sundries supervision charges &labour cess etc, as per direction of Engineer-in-charge
-
-
-
In all kinds of soil(90% as per division)
598.11
-
-
In D.I Rock(10% as per division)
66.46
-
-
Supply & Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately)(including cost of D.I.K-7 pipe & Tyton Rubber Ring)
-
-
-
Laying Cost
-
-
-
150mm dia DI (K7)
115
-
-
200mm dia DI (K7)
1036
-
-
Supplying of the following sizes of Ductile Iron fittings & Specials confirming to IS Specification including cost of contractor profit & labour cess etc all complete as per direction of Engineer-in-charge.
-
-
-
Material Cost
16.9
-
-
Laying Cost
16.9
-
-
Construction of Thrust Block of RCC M-20 with surface reinforcement.( 1.00 x 1.00 x 1.00m)(for 100mm to 400mm size pipe)
12
-
-
Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete . (Labour Only)
-
-
-
150mm diameter
23
-
-
200mm diameter
208
-
-
Fixing cast iron DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK
-
-
-
150mm dia
3
-
-
200mm dia
3
-
-
Construction of brick masonry sluice valve Chamber of size (1.0x1.0x1.5mtr)
4
-
-
Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge.
544.4
-
-
Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.
-
-
-
150mm dia M.S.Pipe (6.30mm thick)
100
-
-
150mm dia M.S. Flange.(12mm thick)
25
-
-
150mm dia 90⁰ M.S Bend
10
-
-
200mm dia M.S.Pipe (6.30mm thick)
200
-
-
200mm dia M.S. Flange.(12mm thick)
25
-
-
200mm dia 90⁰ M.S Bend
15
-
-
Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for all complete as per specification and direction of Engineer-in-Charge.
95.2
-
-
Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set including pocket cutting and welding complete.
95.2
-
-
Supplying all materials,labour and T&P and making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification all complete.
-
-
-
150mm dia Flange joints
25
-
-
200mm dia Flange joints
25
-
-
Filling in foundatin and plinth with sand watered and rammed including cost of sand & labour.
102.73
-
-
Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .
68.49
-
-
Supplying all materials, labour, T&P and providing cement concrete(1:2:4) with 12mm size crusher broken hard granite chips including all cost of conveyance, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as p[er the direction of Engineer-in-charge.
68.49
-
-
Supplying all materials, labour, and T&P for removal/carriage of excavated earth from site to a distance 5 km away etc all complete and as per the specifications and directions of engineer-in-charge.
445.48
-
-
Supply of mechanical full bore type IP 68 fully welded flanged type water flow meter ,flow direction,flow velocity conductivity with + or -0.5% accuracy etc & provision to diagnostic empty pipe detection,coil temperature,coil resistance etc & compatable to data communication modulus with masibus & communication the data to remote SCADA station for live monitoring where ever required including providing data cable & power cable required as per site condition.
63
-
-
Distribution Network (DI-K7),Fittings & Civil Works (Zone-7)
-
-
-
Supply & Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately)(including cost of D.I.K-7 pipe & Tyton Rubber Ring)
-
-
-
150mm dia DI (K7)
1505
-
-
200mm dia DI (K7)
1775
-
-
300mm dia DI (K7)
618
-
-
Cutting asphalt or bituminous/Concrete road and Concrete road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of Engineer-in-charge.
-
-
-
Considering 20% as bituminous road
116.27
-
-
Considering 70% as concrete road
406.94
-
-
Supplying all labour, T&P and earth work excavation in following kinds of soil within initial laed of 50m & initial lift of 1.50m including rough fressing breaking clods and laying in layers not exceeding 0.30m. In depth, levelling the bed, using pans, vessels for slushy soil and including sundries supervision charges &labour cess etc, as per direction of Engineer-in-charge
-
-
-
In all kinds of soil(90% as per division)
1536.04
-
-
In D.I Rock(10% as per division)
170.67
-
-
Supply & Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately)(including cost of D.I.K-7 pipe & Tyton Rubber Ring)
-
-
-
Laying Cost
-
-
-
150mm dia DI (K7)
1505
-
-
200mm dia DI (K7)
1775
-
-
300mm dia DI (K7)
618
-
-
Supplying of the following sizes of Ductile Iron fittings & Specials confirming to IS Specification including cost of contractor profit & labour cess etc all complete as per direction of Engineer-in-charge.
-
-
-
Material Cost
58.83
-
-
Laying Cost
58.83
-
-
Construction of Thrust Block of RCC M-20 with surface reinforcement.( 1.00 x 1.00 x 1.00m)(for 100mm to 400mm size pipe)
52
-
-
Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete . (Labour Only)
-
-
-
150mm diameter
301
-
-
200mm diameter
355
-
-
300mm diameter
124
-
-
Fixing cast iron DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK
-
-
-
150mm dia
4
-
-
200mm dia
4
-
-
300mm dia
2
-
-
Supplying all materials,labour and T&P and constructing brick masonry chamber as per P.H. specification and design all complete including RCC Cover Slab (per each)
-
-
-
Construction of brick masonry sluice valve Chamber of size (1.0x1.0x1.5mtr)
10
-
-
Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge.
1290.02
-
-
Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.
-
-
-
150mm dia M.S.Pipe (6.30mm thick)
600
-
-
150mm dia M.S. Flange.(12mm thick)
125
-
-
150mm dia 90⁰ M.S Bend
65
-
-
200mm dia M.S.Pipe (6.30mm thick)
400
-
-
200mm dia M.S. Flange.(12mm thick)
70
-
-
200mm dia 90⁰ M.S Bend
35
-
-
300mm dia M.S.Pipe(6.30mm thick)
200
-
-
300mm dia M.S. Flange.
45
-
-
300mm dia 90⁰ M.S Bend
30
-
-
Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for all complete as per specification and direction of Engineer-in-Charge.
396.84
-
-
Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set including pocket cutting and welding complete.
396.84
-
-
Supplying all materials,labour and T&P and making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification all complete.
-
-
-
150mm dia Flange joints
123
-
-
200mm dia Flange joints
70
-
-
300mm dia Flange joints
45
-
-
Filling in foundatin and plinth with sand watered and rammed including cost of sand & labour.
348.8
-
-
Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .
232.54
-
-
Supplying all materials, labour, T&P and providing cement concrete(1:2:4) with 12mm size crusher broken hard granite chips including all cost of conveyance, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as p[er the direction of Engineer-in-charge.
232.54
-
-
Supplying all materials, labour, and T&P for removal/carriage of excavated earth from site to a distance 5 km away etc all complete and as per the specifications and directions of engineer-in-charge.
1521.23
-
-
Supply of mechanical full bore type IP 68 fully welded flanged type water flow meter ,flow direction,flow velocity conductivity with + or -0.5% accuracy etc & provision to diagnostic empty pipe detection,coil temperature,coil resistance etc & compatable to data communication modulus with masibus & communication the data to remote SCADA station for live monitoring where ever required including providing data cable & power cable required as per site condition.
79
-
-
SCADA and Automation For Distribution Network
-
-
-
Supply of electric powered electromagnetic full bore type IP 68 Fully welded Flanged type water flow meter of Pulse DC type of Flow tube SS304,coilhousing & electrodes SS316,SS RING TYPE grounding etc with IP 68 signal coverter remote mounting,input power supply 24V DC 4 - 20 mA,programable LCD display to show Actual flow rate,totalised flow, flow direction, flow velocity,conductivity with + or - 0.5% accuracy etc & provision to diagnostics empty pipe detection, coil tempreture, coil resitance etc & comptable to data communication modules with masibus & communicaton the data to remote SCADA station for live monitoning where ever required including providing data cable & power cable required as per site condition. The standard callbratation certificate & guaantee certificate for flow meter & electromagnetic signal coverter to be given for minumum one year from the date of installation. The Approved Make:(ABB,Krone,Immersion,Bermad,E & H) including cost material with all taxes transportation to Site/Storage with insurance.). All complete as per direction of Engineer in charge.
-
-
-
150mm dia Full bore type Electro Magnetic Water Flow meter
3
-
-
200mm dia Full bore type Electro Magnetic Water Flow meter
3
-
-
250mm dia Full bore type Electro Magnetic Water Flow meter
6
-
-
300mm dia Full bore type Electro Magnetic Water Flow meter
6
-
-
350mm dia Full bore type Electro Magnetic Water Flow meter
1
-
-
500mm dia Full bore type Electro Magnetic Water Flow meter
1
-
-
800mm dia Full bore type Electro Magnetic Water Flow meter
2
-
-
Supplying, Fitting,Commissioning,Fixing of double DI control valve (globe type) with solenoid, hydraulic operated with stem and positioner for feed back switch ,solenoid valve,integral orifice plate assembly,differential control,reverse flow control ,restrication orifice body pn-1.6 can be integrated with PLC pannel for operation with a minimum pressure in upstream .2 kg/cm2 to a maximum pressure of 8 kg/cm2 to a maximum pressure of 8 kg/cm2 of the approved make : CLA,DOROTS-300,SINGER,BERMAD-700,VAG to control water supply including cost of material with all taxes transporatation to site/Storage with insurance.
-
-
-
100mm dia PN16 Flow Control Valve with 2 nos solenoid
1
-
-
150mm dia PN16 Flow Control Valve with 2 nos solenoid
6
-
-
200mm diaPN16 Flow Control Valve with 2 nos solenoid
4
-
-
250mm diaPN16 Flow Control Valve with 2 nos solenoid
6
-
-
300mm dia PN16 Flow Control Valve with 2 nos solenoid
6
-
-
350mm dia PN16 Flow Control Valve with 2 nos solenoid
1
-
-
Supplying all labour ,T&P materials for fitting & Fixing of Air relese valve in water supply line including the cost of valve cutting the pipeline & making good to the damages including cost of materials , all labours, T&P etc. all complete as per the direction of Engineer-in-charge.
-
-
-
100mm
8
-
-
80MM
10
-
-
50mm
8
-
-
Provision of Pressure transmeter with PT S-10 0-10 BAR with snuber & isolation ball valve with tube including cost of all materials, Transportation to site etc all complete.incluiding 30 mtr Screened cable including cost of materials , all labours, T&P etc. all complete as per the direction of Engineer-in-charge.
34
-
-
Provision of Pressure Gauge with fittings & isolation ball valve with socket including cost of all materials, Transportation to site etc all complete.incluiding 30 mtr Screened cable including cost of materials , all labours, T&P etc. all complete as per the direction of Engineer-in-charge.
68
-
-
Supply, Installation, Testing,Programming, Wiring & Commissioning of PLC panel Made out of 2 MM C.R sheet,PLC Pannel with encloser size 800x600x1800mm Duely Powder coated, Wall mounted/floor standing, Front operated, complete with interconnection with copper wire and lugs.(Make-Rittal,BCH,Hoffman) Having Type 2-1P+N 15kA Surge protection device- 1Nos ,32A 15KA MCB - 1 nos, DC powered Transistor/Relay based 24DI and 16DO isolator for Analog Input - 16 Nos. (Wago,Phoenix), 24 Vdc 6Amp redundent Power supply Unit with input and output DC MCB - 2Nos,1 HMI ( Make- Wago,Phoenix Contact,Siemens,Schneider), Color Coded Terminal Blocks for AC/DC/earth Bus/TB - 50 Nos.(Make- Wago,Phoenix Contact,Connectwell), 2/4/6 Amp AC/DC MCB- 6nos All switchgear and controlgear make- Siemens,schneider,ABB,L&T. All completed as per electrical specification and as per direction of EIC.
10
-
-
Supply,Installation & Commissioning of SCADA software (Make-Schiender/Simens/Fox) with Graphical processor visualisation Advanced alaram management,historical and Real time trending,Built-in-reporting,Stastical process control,Multithreaded citect VBA and Cicode programming language including supply,installations of Desk top PC, Modem for receiving data, UPS etc all complete.
7
-
-
Supply, Installation & Commissioning of Samsung/Sony/Haier/LG 43" LED TV for SCADA PC Extension
7
-
-
HDPE PIPE: Supply and Laying of 40MM(8Kg/cm2)dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge.(excluding earth work)
4500
-
-
Supply and Installation of pre-fabricated Joint Box with lid size 600 x 600 x 600 mm for OFC loop and termination including labour as per telecom specification and directions of Site Engineer / Engineer-in-Charge.
18
-
-
OFC: Supply and Laying of 12 core unarmoured Optical fibre cable ( OFC. Fiber glass with F-G 62.5/125micron, 2.6DB/KMF600) to various sites through HDPE pipe /in Air ( pole to pole ), prelaying testing of each cable drum for each fibre and tahing the OTDR traces,submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/Site Engineer
4500
-
-
Supply and Installation of OFC jointing kits as per drawings,specifications and directions of Engineer-in-charge/Site Engineer.
7
-
-
Laying HDPE Pipe by HDD method using HDD machine upto 90mm dia including hire charge of HDD machine, operator, POL lubricant etc
4500
-
-
4U wall-mount Rack/Cabinet shelf or self-standing & is great for organizing your DVR-NVR-Server-Network devices. 4U rack has a key lock feature for keeping your device safe in this cabinet. This rack is made with the highest care while making it. Since making its quality, best, 6-way processed powder coating is done for long-lasting, Corrosion and Rustproof. Top and bottom cable entry provides optimal flexibility for cable management. It also has 4 Power sockets surge protector and 1 AC AXIAL cooling Fan attached in it. Rack size: 45 X 55 X 25.5 CM. Weight: 9.20 kg. Colour: Gray. Package Contains 1 Rack, Screws, Nylon Sleeves, 2 Keys.
7
-
-
Gigabit SFP to RJ45 Fiber multi Media Converter | Fiber to Ethernet Converter | 10/100/1000Mbps RJ45 Port to 1000Base-LX Dual-Mode Fiber (Make - Dlink or equivalent)
14
-
-
8 port fiber optic panel or light interface unit drawout Type
14
-
-
OFC Splicing with pigtails
7
-
-
Optical fiber 8-port managed L3 gigabit fiber switch and media coverter for non-blocking throughput switching, high performance and low latency, Gigabit Ethernet SFP and RJ45 ports (Make- Digisol- SG-GS4600FSE or equivalent
7
-
-
Fiber SFP Multi mode transicever 100 base LC type module
14
-
-
SM(OS2) Duplex Patch cord 10mtr LC-SC,PC type
14
-
-
SM(OS2) Duplex Patch cord 3mtr LC-SC,PC type
21
-
-
Fiber Pigtail/patchcord 1 mtr
35
-
-
Provision of pumpset for dewatering from the trenches including cost of POL & operator labours, T&P etc. all complete as per the direction of Engineer-in-charge. etc all copmlete.
210
-
-
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately
2.65
-
-
Supplying all materials, labour, tools & plants for cutting of mettaled road for laying of pipeline including conveyance of all material at work, etc. all complete as per specification and direction of the
2.65
-
-
Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge.
10.8
-
-
Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipe as per specifications including testing with cost of all jointing materials, transportation to site etc. all complete as per the specifications and directions of Engineer-in-charge.
-
-
-
200mm dia MJ Socket
-
-
-
For Installation of Flow meter , Flow Control Valve.
8
-
-
300mm dia MJ Socket
-
-
-
For Installation of Flow meter , Flow Control Valve.
14
-
-
350mm dia MJ Socket
-
-
-
For Installation of Flow meter , Flow Control Valve.
2
-
-
Dismantle joint
-
-
-
200 mm dia
8
-
-
300 mm dia
14
-
-
350 mm dia
2
-
-
Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.
-
-
-
219.10mm OD M.S.Pipe 6 mm thick
-
-
-
For Installation of Flow meter
36
-
-
323.9mm OD M.S.Pipe 7.10 mm thick
-
-
-
For Installation of Flow meter
54
-
-
355.6mm OD M.S.Pipe 8 mm thick
-
-
-
For Installation of Flow meter
24
-
-
Supplying M.S.flange of following thick suitable for following dia of M.S./C.I pipes specials,valves with wastage including cost of materials, labour, T & P etc all complete.
-
-
-
200mm M.S. Flange.(12mm thick)
-
-
-
For Installation of Flow meter
24
-
-
300mm dia M.S. Flange.(16mm thick)
-
-
-
For Installation of Flow meter
36
-
-
350mm dia M.S. Flange.(16mm thick)
-
-
-
For Installation of Flow meter
8
-
-
Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete
15.52
-
-
Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes upto 8mm thick and fittings at site by using welding generator including testing of joints, as per specification complete
15.52
-
-
Supplying all materials, labour and T&P for making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification and direction of E.I.C.
-
-
-
200mm dia
-
-
-
For Installation of Flow meter , Flow Control Valve
12
-
-
300mm dia
-
-
-
For Installation of Flow meter , Flow Control Valve
18
-
-
350mm dia
-
-
-
For Installation of Flow meter , Flow Control Valve
4
-
-
Cutting of C.I /DI pipe by eletric arc welding,at site including cost of materials,labour,T & P etc all complete
15.52
-
-
Supplying all materials, labour T&P for construction of RCC Valve chamber of following internal sizes having earth work in excavation in all kinds of soil, 150mm sand filling ,150mm PCC (1:3:6), 200mm thick base, wall & cover slab with RCC 1:1½:3, fixing factory made precast SD20 Frame & cover slab, foot step iron etc all complete.
18
-
-
Supply of Level transmitter to be installed at ESR with following specification Range= 0 to 8 mtr Type =Radar Power Supply=24V DC Out Put=4-20mA Make=E&H/ABB/VEGA including Installation, fixing & commissioning of Level transmitter
3
-
-
Supply, Installation and commissioning of instrumentation cables for taking instruments output into PLC panel as per electrical specification
-
-
-
1.5 sqmm 16 core copper braided screen instrumentation cable
1300
-
-
1.5 sqmm 4 core copper braided screen instrumentation cable
360
-
-
1.5 sqmm 2 core copper braided screen instrumentation cable
920
-
-
CAT-6 Dlink cable
140
-
-
Supply, Installation and commissioning of copper power cable system includes cables to be laid in soil, in trenches, cables to be laid in racks, cleated on walls, cable lugs, cables glands, conduits, cable joints etc.as per specification. all Complete Works Copper conductor
-
-
-
2.5 sqmm x 3 Core Cu. Flexible Cable
280
-
-
70 sqmm x 1 Core Cu Flexible Cable
350
-
-
Supply,Installation and commissioning of HDPE cable duct 40mm width to wall,celling with necessary bracket, for laying of power and data cable etc.as per specification. all Complete Works
720
-
-
Installation and commissioning of Control cables to be inserted in conduit pipe in trenches, cables to be laid in racks, cleated on walls, cable lugs, cables glands, conduits, cable joints etc.as per specification. all Complete Works Screened cable unarmoured
-
-
-
1.5 sqmm x 2 Core Overall Shielded Cu. Instrumentation Cable
720
-
-
Supply,Installation and commissioning of single phase 1KVA Online UPS, Having Double conversion IGBT based online UPS system with builtin Isolation Transformer, Input 150-250VAc 1Phase,50Hz, output: 230 VAC,1Phase,50Hz. Dry type 3 nos Battery 65AH with MS Rack . All completed as per electrical specification and as per direction of EIC.
8
-
-
Supply,Installation and commissioning of LT surge arrester having 5KA capacity with Spike and all accessories including cost of all materials,labour,T & P etc all complete.
8
-
-
Supply & installation testing & commissioning of advanced active lightening protection system at all the PLC rooms all complete as per direction of engineer in charge
8
-
-
Supply, Installation & Testing of the 25x6mm Earthing strip along The Cable Trenches or Cable Trays or Fixing to Walls (by Using Proper Size of Spacer and Saddles ) or Structures or buried individually in paved/ unpaved areas (minor civil work like chipping of paved surface finishing after laying grounding loop, etc. Welding at joints, providing anti-corrosive paint for Welded portion, clamping & necessary hardware for connection, excavation & refilling, etc. including provision for risers at places as per approved drawings, all labour to be considered in installation work ) & all other required materials complete as per the drawings/site in- charge. Including Earthing saddles, clamps ,terminal ,lugs etc.
210
-
-
Supply, Installation & Testing of theEarthing Bar along The Cable Trenches or Cable Trays or Fixing to Walls of panel (by Using Proper Size of Spacer and Saddles ) or Structures or buried individually in paved/ unpaved areas (minor civil work like chipping of paved surface finishing after laying grounding loop, etc.Welding at joints, providing anti-corrosive paint for Welded portion, clamping & necessary hardware for connection, excavation & refilling, etc. including provision for risers at places as per approved drawings, all labour to be considered in installation work ) & all other required materials complete as per drawings/site in- charge. Including Earthing saddles, clamps ,terminal ,lugs etc.
14
-
-
Supply, unloading, handling, installation, testing, Commissioning of Chemical eathing system in an earth pit of 300 x 300 mm filled with back filling compound in alternate layers 150mm.from bottom. The pipe shall have provision for watering through a funnel. A masonry structure 300 x 300 mm (clear) Chamber, a heavy duty Cast iron / RCC cover (10kg) complete shall be used to cover the pit. Excavation, backfilling, removal of excess soil is included in the scope complete as per technical specifications, drawings, relevant standards & site conditions.
28
-
-
Supplying all materials,labour,T&P for construction of SV/NRV/AV chamber of following size as per PH design and specification etc. all complete as per the direction of Engineer-in-charge.
-
-
-
3mtr x 1.5 mtr x 1.5mtr
15
-
-
5.5mtr x 1.5 mtr x 1.5mtr
18
-
-
Supply installtion testing wiring & commision IP 66 rated metal outdoor flow meter display panel having 16A Dp RCBO 30m-1Nos 6A DP MCB-2 Nos,2A Sp MCB 2 nos 24V DC 5A SMPS 1no complete with al;l interconnection wirth copper wire & copper lugs.All switchgear & controlgear make Siemens/Snidder,ABB,L&T all complete as per the direction of Engineer-in-charge.
18
-
-
Supplying all materials, labour & T&P for fitting, fixing of following size of D.I. Non rising Sluice Valve (PN 1.6) cofirming to to IS 14846 including cost of rubber insertion, nut & bolt but excluding cost of valves etc. all complete as per the direction of Engineer-in-charge.
-
-
-
350mm Dia
1
-
-
300mm Dia
9
-
-
250mm dia
13
-
-
200mm dia
4
-
-
150mm dia
6
-
-
100mm dia
1
-
-
Supply, installation, testing & commissioning of DI Pilot Altitude flow Control valve of DOUBLE CHAMBER (Globe Type) with orfice plate for propose to close valve at maxium water level of ESR & open the refill the ESR AT LOWER ALTITUDE Control valve should be worked at minimum pressuer 1kg/cm². An altitude control valve control at level of a tank .The altitude valve will remain open while the tank is not full and it will close when the ntanks reaches its maximum level. The opening & closing the valve will work without extranal power soures (electric,pneumatic or man power ). It will work automatically. The body, Spool & Cover will be DI ASTM A- 536 standard, Spring, steam, Jam nut, Cover bolt, & cover waser shouuld be SS, DI/SS Diaphragm plate Nytrill/Nylon diaphragm, Brozen cover bushing, Seat plate & ring . The Approved make : (VAG/SINGER/ BURMAD-700/DORT-S300 ) with 2 nos solenoid including cost of all materials with all taxes transportion to site /Storage with insurance.
-
-
-
200mm dia
2
-
-
250mm dia
2
-
-
Installation of Chlorination System
-
-
-
Supply, Installation, Testing,Programming, Wiring & Commissioning of REmote I/o sensing panel Made out of 2 MM C.R sheet,PLC Pannel with encloser size 800x600x2100mm Duely Powder coated, Wall mounted/floor standing, Front operated, complete with interconnection with copper wire and lugs.(Make-Rittal,BCH,Hoffman) Having Type 2-1P+N 15kA Surge protection device- 1Nos ,32A 15KA MCB - 1 nos, DC powered Transistor/Relay based 24DI and 16DO Ethernet PLC Module, 35 Micosecond Response time for DI/DO Switch on/off, 8ch Analog input module-. All completed as per electrical specification and as per direction of EIC.
7
-
-
RIO panel
-
-
-
Supplying all materials,labour,T&P, for fitting of PLC panel as per electrical specification
-
-
-
1.5 sqmm 8 core armoured cable
150
-
-
1.5 sqmm 3 core armoured cable
300
-
-
CAT-6 Dlink cable
25
-
-
Cable Gland-25 mm
300
-
-
Cu.logs-1.5/2.5
-
-
-
Supply,Installation, Testing and commissioning of Chlorine Dosing System incluiding laying of pvc pipe interconnection with main water line, Chemical storage and handling equipment etc.0-500 Lph Zero leakge pneumatic diapharm dosing pump with VFD control - 2 nos, one primary and one one standby mode, pressure upto- 10 bar, 2000 Ltr Chemical tank capacity. Agitator motor-1 nos, strainer, NRV on Pump Outlet, with PLC compatible VFD Panel for dosing pump and agitator etc. transportation & packaging` including cost of materials , all labours, T&P etc. all complete as per the direction of Engineer-in- charge.
7
-
-
Chiorine leackage indecator
7
-
-
Supply, of On line Chlorine Analyser with following technical specification i.e.Single Channel free Chlorine Analyser,Transmitter-Aqua4trans DualChannel,FRC sensor FMNSX5 with 10 feet cable(with manual PH compensetion),Complete system pre mounted on plate with FTCs foe sensors,Power supply110-240VAC,Trans 2" pipe/wall /Panel mount type,RangeFRC-0-5 ppm,Complete plate mounted system,(The Analyzer must be pre wired on plate,we will provide only power supply & pipe connection system) (Make-Khronemarshall, ABB, Siemens)
7
-
-
Supply and laying of pre-fabricated RCC Joint Box with Iid for Chlorine line tapping as per specification and directions of Site Engineer / Engineer-inCharge.
7
-
-
SCADA ROOM
-
-
-
Design and construction of RCC Structure of 1 storey building on 200 Sqm. super built up area including Plastering, Punnning, Flooring, Painting, Wood Works, electrical fittings & installation all complete including cost of all materials labour and T&P as per the direction of Engineer In-charge
-
-
-
PLC Room Inside WTP Campus
200
-
-
Chemical House for chlorine dosing@250sqrt each
175
-
-
Supplying all materials labour & T & P for fitting & fixing of 1.5 ton capacity AC including testing & commissioning etc. complete as per direction of Engineer in Charge. (LG/Voltas/Blue Star)
4
-
-
Supplying all materials, Labour & T&P for providing New House connections to beneficiaries from PHE Deptt./ WATCO CI/ DI pipe line to the property of beneficiaries/ Repair of House connection with extension of service etc. including earth work excavation, cutting of concrete / Metal/ BT road, refilling the trenches & making good to the damaged road with CC (1:2:4) after completition of the work, lifting of excess excavated materials/ debrises from work site & disposing within 5 KM radious by mechanical transport, fixing 1/8" dia brass/ GM ferrule with following dia. composite Strap Saddle in the CI/DI pipe line, cutting holes in brick/ stone/ RCC masonary work, repair the broken holes, cost of uPVC Schedule - 80 pipe (25 mm / 20 mm dia up to 7.0mtr /10 mtr respectively ) & fittings, 1 No of PVC Tap of approved make etc. complete as per technical & PH specification and direction of Engineer - in- Charge.
Number of Households-2021
-
-
-
With 100mm dia distribution main
140
-
-
With 150mm dia distribution main
403
-
-
Supplying all materials Labour & T & P for fitting & fixing of 20mm dia MDPE pipe (10kgf/cm2) with compression fittings for connection with ferrule & uPVC service pipe of different diameter to make the connection leak proof including cost of required length of 20mm dia MDPE pipe up to 1.0 mtr ,both side elbow/Female threaded elbow/Male threaded elbow/Both side adopter/Male threaded adoptor/ Female threaded adoptor etc.complete as per site condition & ditrection of Engineer in charge.
543
-
-
RCC Framed Boundary Wall (100 M) with Fly Ash Brick Filler Wall
-
-
-
RCC Framed Boundary Wall (100 M) with Fly Ash Brick Filler Wall for 7 Nos of proposed ESR
610
-
-
For pillar and gate
4
-
-
Approach Road for 7 nos of ESR each 30m
150
-
-
Repair of House Connection including Replacement of Ferrule & Saddle etc including cost Materials
-
-
-
Repair of House Connection including Replacement of Ferrule & Saddle etc including cost Materials
36
-
-
PUMPING ARRANGEMENT
-
-
-
Centrifugal PumpSets without Control Panel at WTP to all zones(2W+2S) (Capacity-310 HP)
1240
-
-
Centrifugal PumpSets without Control Panel at RWR to WTP (2W+2S)(Capacity-200 HP)
800
-
-
Centrifugal PumpSets without Control Panel at Old WTP to Zone 4(2W+2S)(Capacity-90 HP)
360
-
-
Star delta control panel with APFC arrangement.
1240
-
-
Star delta control panel with APFC arrangement.
800
-
-
Star delta control panel with APFC arrangement.
360
-
-
Supplying all materials, labour T&P for Construction of RCC pump foundation base including fiXing of base plate for installation of centrifugal pump as per approved specification and direction of Engineer in charge.
4
-
-
Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.
-
-
-
250mm dia M.S.Pipe (6.30mm thick)
50
-
-
250mm dia M.S. Flange.(12mm thick)
15
-
-
250mm dia x 45' M.S. Bend
8
-
-
300mm dia M.S.Pipe (7.10mm thick)
30
-
-
300mm dia M.S. Flange.(12mm thick)
11
-
-
300mm dia x 45' M.S. Bend
5
-
-
Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete
-
-
-
250mm dia & 300mm dia
40.39
-
-
Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set of pocket etc all complete
-
-
-
250mm dia & 300mm dia
40.39
-
-
Supplying all materials Labour & T & P for Fixing Ductile Iron Actuator Sluice Valve / NR Valve with double flanged ends for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Sluice valve .
-
-
-
250mm dia D/F Actuator Sluice Valve (PN1.6) Vag/Talis/AVK make
4
-
-
300mm dia D/F Actuator Sluice Valve (PN1.6) Vag/Talis /AVKmake
4
-
-
250mm dia D/F Non Return Valve (PN1.6) Vag make
4
-
-
350mm dia D/F Non Return Valve (PN1.6) Vag make
4
-
-
Supply. Installation of Power mounted Online chlorine & Turbidity analyser with Chlorine sensor with RS 485 Modbus Output, Battery (4x196 AH). 5 Micron Ctridge Filter, 4G Modem with GSM/ Ethernet/ Fiber Output, FRP Enclosure stainless steel, floe cell for chlorine and turbidity sensor, turbidity sensor with RS 485 Modbus Output etc. as per direction of Engineer-in-charge.
2
-
-
Supply. Installation of PH Analyser range 0 to 14 PH etc. as per direction of Engineer-in-charge.
2
-
-
Supply, installation of chemical earthing with crystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag - 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all complete as per the site requirement.
28
-
-
Detailed engineering drawing & design and Survey Investigation (1% of A )
1
-
-
Provision for quality control, monitoring and management (1% of A)
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements