Water Corporation Of Odisha Tender

Supply of Level indicator to be installed at UGR and ESR with following specification, Range 0 to 8 mtr, Type =Radar, Power Supply=24V DC, Out Put=4-20mA, Make=E&H/ABB/VEGA

Supply of Pressure transmeter with following technical specification, i,e.Range up to 5 kg/cm2,Type-Sensor,Power Supply-24 DC,Out put-4 to 20mA,Make-E & H/ABB/VEGA.

Installation of level indicator & pressure sensor including supply of all required materials like SS mountingplate,laying of PVC pipe, excavation of soil,arrangement for making drill on DI/CI pipe for safe installation of instruments with providing Engineering support for programmingetc. as per direction of Engineer-In-charge

Supply, Installation, Testing Wiring & Commissioning of PLC panel Made out of 2MM C.R sheet, Duely Powder coated, Wall mounted, Front operated, complete with interconnection with copper wire and lugs. Having Type 2-1P+N 15kA Surge protection device- 1Nos ,32A 15KA MCB - 1 nos, DC powered IIot -ready logic controller having maximun 1024 discrete + 256 I/O capability dual ethernet and serial conforming ANSI/ISA 12-12-01,CSA C22.2 No 142,CSA C22.2 No 213,EN/IEC 61131-2:2007,Transistor based 320DI and 320DO Module, 35 Microsecond Response time for DI/DO Switch on/off, 160 Analog input module having 1ms per channel conversion/sampling time. 60 Analog Output module having 1ms per channel conversation/ stabilisation time. Ambient air tempature upto 55 'C. (Make- Siemense ,Schneider-,Allen Bradly).

Rated DP Separate DC MCB for Indivisual Modules.16 ch Analog Interface card for Analog input-20Nos, 6Ch analog Interface Card for Analog Output-10Nos (Make - Pheonix, Rishab,)24VDC 1C/O type slim Relay with led for Digital out put - 160 Nos (make-wago,phoenix contact). 8 Ch Unmanaged Industrial Grade Switch- 1 Nos. (Make- wago,schneider,siemense,Allen Bradley) .4G ethernet TCP/IP-Modbus Industrial Grade GSM Router - 1 Nos (make- Robustel,Teltonika). 1.5 mmFuse TB with 0.5A glass fuse with Fuse blown indicator type Terminal Block for Digital Input/analog output-400 nos. 1.5 mm Terminal block for Digital Output - 320Nos. (Make- wago,Phoenix Contact). 24VDC powered signal isolator for Analog Input - 160 Nos. (Phoenix, Rishab,), 24 Vdc 10Amp redundent Power supply Unit with input and output DC MCB - 2Nos ( Make- Wago, Phoenix Contact, Siemens, Schneider), Color Coded Terminal Blocks for AC/DC/earth Bus/TB - 150 Nos.(Make- Wago, Phoenix Contact, Connectwell), 2/4/6 Amp AC/DC MCB- 10nos All switchgear and controlgear make- Siemens, schneider, ABB, L&T, LEGRAND. All completed as per electrical specification and as per direction of EIC.

Supply, Installation, Programming, Testing & Commissioning of SCADA including supply of all materials T&P and Labour Etc, Having -6400 Tag SCADA Software with Hard/Soft licence Key(Make- Schneider, Siemense,Allen Bradley). Server Grade CPU Having win-10 Proffessional/ win server-2016/2019, Intel Quad core Xeon 3.5 Ghz Prrocessor, DDR4 8gb Ram, 500 gb 7200 Rpm HDD-1 Nos,USB based keyboard - 1Nos, USB based Optical Mouse- 1Nos, Having 3Years manugacturer warrenty( Make- HP,DELL,LENOVO),32'' HD IPS monitor - 1Nos ,Having 3Years manugacturer warrenty( Make- Lg,Samsung,Acer,Benq), A4 size laserPrinter - 1Nos (Make- HP,Canon,Epson), Wooden Computer table - 1 Nos , Preparation of P&I diagram, Creation of Multi visualization screen for Process control,alarm managenent, Historical and realtime process trend, Daily reporting etc.All completed as per electrical specification and as per direction of EIC.license key required for all SCADA & PLC.

Supply, Installation, Programming, Testing & Commissioning of 3KVA Online UPS with 08 Hr Battery Backup System including supply of all materials T&P and Labour Etc, 3 Kva PWM Technology & IGBT based online UPS system with builtin Isolation Transformer, Input 230VAc 1Phase,50Hz, output: 230 VAC,1Phase,50Hz. Dry type Battery with MS Rack for 08 Hour Backup. All completed as per electrical specification and as per direction of EIC.

2.5 sqmm x 10 Core Cu. Armoured Cable

1.5 sqmm x 2 Core Overall Shielded Cu. Armoured Cable

16 mm SC Gland with Double compression

19 mm SC Gland with Double compression

Supply, installation of chemical earthing with crystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag - 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all complete as per the site requirement.

4U wall-mount Rack/Cabinet shelf or self-standing & is great for organizing your DVR-NVR-Server-Network devices. 4U rack has a key lock feature for keeping your device safe in this cabinet. This rack is made with the highest care while making it. Since making its quality, best, 6-way processed powder coating is done for long-lasting, Corrosion and Rustproof. Top and bottom cable entry provides optimal flexibility for cable management. It also has 4 Power sockets surge protector and 1 AC AXIAL cooling Fan attached in it. Rack size: 45 X 55 X 25.5 CM. Weight: 9.20 kg. Colour: Gray. Package Contains 1 Rack, Screws, Nylon Sleeves, 2 Keys.

Gigabit SFP to RJ45 Fiber multi Media Converter | Fiber to Ethernet Converter | 10/100/1000Mbps RJ45 Port to 1000Base-LX Dual-Mode Fiber (Make - Dlink or equivalent)

24 port fiber optic panel or light interface unit to terminate and protect optic cables and fibers in communication networks

OFC Splicing with pigtails

Optical fiber 16-port managed L3 gigabit fiber switch and media coverter for non-blocking throughput switching, high performance and low latency, Gigabit Ethernet SFP and RJ45 ports (Make- Digisol- SG-GS4600FSE or equivalent

Fiber SFP Multi mode transicever 100 base LC type module

SM(OS2) Duplex Patch cord 3mtr LC-SC,PC type

Fiber Pigtail/patchcord 1 mtr

PART-B CIVIL WORK INCULDING OFC - Cutting of Cement concrete road for repair/laying of water supply line pipe removal of debries by Tractor-trolley including , transportation, all labours, T&P etc. all complete as per the direction of Engineer-in-charge.

redoing

Cutting of Asphalt road for repair/ laying of water supply pipe line removal of debries by Tractor-trolley including , transportation, all labours, T&P etc. all complete as per the direction of Engineer-in-charge.

redoing

Mending with Plain cement concrete (1:2:4) with 12mm.size crusher broken hard Granite chips including cost of all labour, materials with all taxes, lead, T & P etc all complete.

redoing

CABLE TRENCH: Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 0.9 metres or bellow to the water Pipeline including backfilling the trench, job complete in all respects, including all labour and materials complete as per specification and directions of Site Engineer /Engineer-in-Charge.

HDPE PIPE: Supply and Laying of 40MM(8Kg/cm2) dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge.

Supply and Installation of pre-fabricated GRP Joint Box with Iid size 600 x 600 x 600 mm for OFC loop and termination as per telecom specification and directions of Site Engineer / Engineer-in Charge.

OFC: Supply and Laying of 12core unarmoured Optical fibre cable (OFC :fiber glass with F-G 62.5/125micron, 2.6DB/KM F600) to various sites through HDPE pipe /in AIR ( pole to pole ), prelaying testing of each cable drum for each fibre and taking the OTDR traces, submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/ Site Engineer.

Supply and Installation of OFC jointing kits as per drawings, specifications and directions of Engineer-in-charge/Site Engineer.