Water Corporation Of Odisha Tender

Supply, of On line Chlorine Analyser with following technical specification

i,e.Single Channel free Chlorine Analyser,Transmitter-Aqua4trans DualChannel,FRC sensor FMNSX5 with 10 feet cable(with manual PH compensetion),Complete system pre mounted on plate with FTCs foe sensors,Power supply110-240VAC,Trans 2" pipe/wall /Panel mount type,RangeFRC-0-5 ppm,Complete plate mounted system,(The Analyzer must be pre wired on plate,we will provide only power supply & pipe connection system)

Supply & Installation of PH analyser with following specifications:- Measurement-PH/ORP(Platinum), Temperature range-0-60 degree C (32 to 140 degree F),Maximum Pressure-6 Bar(90PSI), (ABB/E&H/Forbes Marshal)

Supplying all materials,labour,T&P, for fitting of PLC panel with following data/ power cables of Lap make including jointing socketing testing & commissioning etc. complete as per specification basing on requirement and direction of Engineer in charge.as per electrical specification

1.0sqmm x 2Core Overall Shielded Cu. Armoured Cable for P.T

1..00sqmm x 6 Core Shielded screened Cu. Armoured Cablen for Flow meter

1..00sqmm x 4 Core Shielded Cu. Armoured Cablen for Flow control valves

16 mm SS 304 grade Gland for PLC & outdooor boxees

19 mm SS 304 grade Gland

45MM SS 304 grade Gland

57MM SS 304 grade Gland

19 mm SS 304 grade Gland

25 mm SS 304 grade Gland

HDPE PIPE: Supply and Laying of 40MM dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge.

Supply, Installation, Testing & Commissioning of Cable tray GI with metal bracket of required size as per QAP/GA drawing.

Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift & filling the trenches with excavated earth as per the direction of the Engineer-in-charge.

Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .

Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6)

R.C.C work in ground floor of M-25 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .

Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete.

R.C.C. Foundation, Plinth Band, Footings, Bases of Columns, Mass Concrete & Precast Slabs etc.

Supply, installation of l earthing with crystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag - 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all complete as per the site requirement.

Supply Fitting, fixing & commissioning of following dia Eletromagnetic water meter with the development of the application for monitoring and reporting with below specification: MOC Electronics Enclosure - Die Cast AL, Cable Entry - M20 X 1.5, Power Supply - 24VDC , Output 1 - 4 to 20 mA,/modbus Output 2 - None, Alarm Output -None, Communication Output 1 - Eathernate,Process Connection - Flanged, MOC Flange - SS316, MOC Coil Housing - SS304, Lining Material - PTFE, Flange Standard - ANSI, Flange Rating - ANSI 150, MOC Flow, Tube -SS304, MOC Electrode -SS316L of make ( Emerssion/Krone/Bermad/Foresh Marschal/E & H/Simence)

150mm dia Flow meter Electric operated

Supplying, Fitting,Commissioning,Fixing double chamber control valve solonied control,hydraulic operated for operating pressure 1.0-2.0 Kg/cm2 Body A216 WCB integrated with PLC pannel for operation (local/remort and web enabled with command and control ) at ESR of make Bermad-700/ CLA/DOROT S-300/AVK /Singer to control water supply including the cost of valve cutting the pipeline & making good to the damages including cost of all labours, T&P etc. all complete as per the direction of Engineer-in-charge.

150mm dia Electricoperated Control Valve

Supply of Pressure transmeter (transducer) to be installed in delivery main with following technical specification i,e. Range up to 7 kgf/cm2,Type-Sensor, Power Supply-24 DC, Out put-4 to 20mA, Make-E & H/ABB/VEGA.

Supplying installation & commsioning of PT Chamber HENSEL- IP69 size 220x170x96 mm withprovision of two cable entry all copmlete as per direction of EIC.

Supply, Installation, Testing Wiring & Commissioning IP 66 rated Metal outdoor Flowmeter display panel- having 16A Dp RCBO 30Ma-1Nos, 6A DP MCB-2 Nos, 2A SP MCB-2NOS, 24VDC 5A Power supply module-1 Nos, complete with all inter connection with copper wire with coper lugs. - All switchgear and controlgear make- Siemens, schneider, ABB, L&T, LEGRAND. All completed as per electrical specification and as per direction of EIC.

Supply and Installation of pre-fabricated GRP Joint Box with Iid size 600 x 600 x 600 mm for OFC loop and termination as per telecom specification and directions of Site Engineer / Engineer-in Charge.

Supply,installation & commissioning of PLC Panel with following technical specification i,e. Enclosure: 800x800x2100mm-01 No with double door & lock, CPU should have 1 MB program memory with extended memory slut ,Redundand-24VDC,SMPS 10Amp along with 24V DC SPD,IO count as DI-16,DO-20,AI-20,AO-08 & MODBUS-10 subsystem shall be of same series as CPU,10" Panel Mounted HMI,Modem should have support MQTT Protocol by default, 24volt DC Industrial switch with minimum 6 eathernate, 4 SFP Port each AI shall be equiped with sutitable signal isolator of 20 Nos & surge protection device 20 nos LIU Isolater, 230Volt AC/230volt AC torroidal transformer,1KVA 230V AC industrial grade UPS of 8 hrs backup to charge 3 nos 12 VDC 65 AH Battery ,DP MCB of Adequate current capacity,LED tube light 10" 5 watt,door limit switch,Fan 6" with louver,4 sqmm straight through terminal & fuse terminal 90 nos ,with PE & EE.The Approved Make : (PLC- Siemens,Schnider,Phoenix,ABB,Mitsubishi SMPS -Phoenix,Siemens,Schnider. Isolater-Masibus,Rishabh,Multispan. SPD-Phoenix,Mersen,Dehn UPS-Vertive, Hitachi,High Rail,AVO, Eathernate switch-Siemense,Moxa,Phoenix) including cost of material with all taxes transporataion to Site/Storage with insurance.Programme to be handed over with upload & download facilities for departmental use.

Supply,Installation & Commissioning of SCADA software (Make-Schiender/Simens) with Graphical processor visualisation Advanced alaram management,historical and Real time trending,Built-in-reporting,Stastical process control,Multithreaded citect VBA and Cicode programming language with 2048 Tag SCADA Software (ES+OS) (Make- Schneider, Siemens),1KVa online Ups with 30Min batery backup- 1Nos,CPU Having Preloaded win-10 Proffessional, I3-10gen 2.4 Ghz Prrocessor, DDR4 8gb Ram, 500 gb 7200 Rpm HDD-1 Nos ( Make- HP,DELL,LENOVO),USB based keyboard - 1Nos,USB based Optical Mouse- 1Nos,43'' LED monitor - 1Nos,A4 size laserPrinter - 1Nos,Wooden Computer table - 1 Nos ,Preparation of P&I diagram, Creation of Multi visualization screen for Process control,alarm managenent, Historical and realtime process trend, Daily reporting etc complete as per requirement & direction of Engineer - in - Charge (Including license key)

Rador base level transducer (1 -10 mtr) with SS 316 grade mounting bracket

50 sqmm x 3.5 Core AL.Armourded cable

Integration of instrument like flow meter,control valve,level transducer & pressure transducer etc.

MS Angle framed Wiremesh Fencing around control valves of 1.5 mtr height