Water Corporation Of Odisha Tender

Fly Ash brick work in cement mortar (1:6) in Foundation & Plinth using Fly Ash bricks of approved quality including cost, conveyance & royalty of all metarials etc complete as per direction of the Engineer-in-charge.

Fly Ash brick work in cement mortar (1:6) in Superstructure using Fly Ash bricks of approved quality including cost, conveyance & royalty of all metarials etc complete as per direction of the Engineer-in-charge.

Cement concrete (1:11/2:3) with 12mm.size crusher broken hard Granite chips for R.C.C.work including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .

Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete. R.C.C. Foundation, Plinth Band, Footings, Column Base, Mass Concrete & Precast Slabs .

R.C.C. Beams, Column, Grider and Bressmer.

R.C.C. Lintels.

Floor & Roof Slabs, Landings, Balconies, Projecting, Sun Shades and Chajja.

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.

2.5 cm A.S. flooring with cement concrete (1:2:4) including punning using 12 mm to down graded chips H.G.including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

12 mm thick plaster with cement mortar (1:6) over brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

16 mm thick plaster with cement mortar (1:6) over stone/brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

Painting wall surface new/old with water proofing cement paint of approved shed 2coats to produce an even shape including curing for required period complete with all cost of materials, labour, T & P and scaffolding as directed by the Engineer-in-charge.

Supplying fitting fixing of UPVC window (sliding type) made as window frame section number 4095,4096 & 9777,3994 as shutter frame with 5mm thick plane glass as pannel fitted with rubber bending including locking arrengement including all fittings including cost of materials all taxes labour T & P excluding cost of glass etc complete as per direction og Engr-in-charge .

Iron work wrought and put up in window grating including drilling holes in choukathas (Including Material & Labour).

Providing rajshri brand factory made internal PVC Door frame manufactured by M/S Rajshri of the size 90mm x 45mm with a wall thickness of 5mm (±0.25) plain/prelam PVC foam sheet manufacture by an ISO-9001-2008 certified company. Meter cut at two corners and joined with 4nos. of 150mm long brackets of 15 x 15 M.S. square tube of 19 gauge through out the frame. The door frame fixed with wall using 65/100mm long M.S. screws through the frame by using PVC fastners. A minimum of 4nos. of screw to be provided for each vertical member and minimum 2nos. for horizontal member and 30mm thick ”RAJSHRI” BRAND FACTORY MADE MOULDED DOOR SHUTTER-WOOD FREE consisting of frame made out of M.S. tube of 19 guage thickness and size of 20mm x 40mm for stiles as well as top, bottom, & lock rail. M.S. frame shall have a coat of metal primer of approved make and manufacture. The inside panel shall consists of 20mm thick multichamber hollow PVC section of 1mm thickness, bonded using solvent cement/cyanoacrylate Adhesive with 5mm (±0.25) manufactured by an ISO-9001-2008 Certified company with 2,4,6 raised panel design in plane/prelam PVC sheet to be pasted with solvent cement/cyanoacrylate adhesive on other side of hollow PVC section. All the four edge of panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet of door, 20mm thick (5mm x 4 nos) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3nos. stainless steel butt hinges of size 100mm x 25mm x 2mm and 50mm long steel screws drilled suitable to pass through both the wall of the MS tube. Other hardwares should be fixed with 25mm x 8mm sixe steel screws etc, complete as per direction of Engineer-in-charge, manufactures specification and drawing.

Supplying all materials labour T & P and fitting and fixing of FRP/ Rajashree make single pannel PVC moulded door with chowkaths including all cost conveyance labour for fixing hard ware fittings etc complete as per direction of Engineer-in charge.

Water Supply & sanitation work Providing and fixing to wall or ceiling and floor uPVC pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. 15mm diameter.

25mm diameter.

32mm diameter.

Providing & fixing to wall following P.H. fittings of reputed make including cost of materials,labour for fixing etc all complete as pe specification. 15mm dia CP Brass Short Body Bib Cock.

15mm dia CP Brass long body Bib Cock

15mm dia CP Brass Stop Cock.

25mm dia nominal bore brass Ball Valve teflon brass ball & spindle.

15mm dia CP pillar cock long neck.

25mm dia brass or gun metal fullway valve.

Supplying all materials labour T & P fitting & fixing of sanitary installation of approved make including all jointing materials and cost,taxes,conveyance etc all complete as per P.H. specification and direction of Engg-in-charge. 500 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan.

P.V.C. low level flushing cistern 10 litre capacity - White.

Vitreous china flat back wash basin 450x300 mm.

Stainless steel kitchen sink - without drain board 610x510 mm bowl depth 200 mm.

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm with PVC waste fittings.

Chromium Plated Brass Shower rose with 15mm or 20mm.

20mmx600mm long Chromium Plated brass towel rail.

15mm dia C.P. Extension piece.

Supplying all materials labour T & P for fixing P.V.C soil waste ventilating and Rain water pipes and fittings to walls with nails,bobbins and wooden plugs as per specification or laying in trenches including earth work in excavation in all kinds of soil and refilling of trenches as per specification. 75mm UPVC Pipe 4kg/cm2.

110mm UPVC Pipe 4kg/cm2.

Single tee with door (75x75x75 mm)

Single tee with door (110x110x110 mm).

75mm P.V.C. plain bend.

110mm P.V.C plain bend

Shoe (Plain) 75 mm dia.

Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete.

Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge. 1000 litre capacity Double Layer Cylinderical Vertical water storage tanks(Non ISI).

ELECTRICAL WORK POINT WIRING :- Supply, Installation, Testing & Commissioning oflight/Fan/Exhaust Fan point in 20mm dia medium gauge ISI marked Good quality PVC pipe with 1.5 sq.mm PVC insulated Cu.wire (2 run) & 1.0 sq.mm PVC insulated Cu.wire (1 run) for running earth complete with 1 no .6Amp.1way plate type Modular switch (Polycarbonate) , 1 no fan regulator and G.I box of adequate size including PVC bend, saddle, elbow, etc and other necessary materials & labour complete as per the direction of Engineer-in-Charge. Group-A (up to 2mtrs).

Group-B (up to 4mtrs).

Group-C (up to 6mtrs).

Secondary Point(Only wire from 1Lt Point to Another Lt Point-Upto 3mtr).

Circuit or Sub-main wiring in 20/25/32/50mm dia. good quality ISI mark PVC Conduit with following sizes PVC insulated un-sheathed 1100V,Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (MAKE- FINOLEX/ / HAVELLS). (2 x 1.5 + 1 x 1.0) sq.mm copper wire.

(2 x 2.5 + 1 x 1.5) sq.mm copper wire.

(2 x 4 + 1 x 1.5) sq.mm copper wire for AC Point. & Geyser Point.

Supply, Installation, Testing & Commissioning of 1 ph. 16 way,Single pole and Neutral, sheet steel MCB double horizontal door distribution box complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate includingcommissioning including all other materials etc. as required.- as per SLD. (MAKE- LIGRAND).

Supply, Installation, Testing & Commissioning of 6 amp to 32 amp rating 240 V "C" series miniature circuit breaker suitable for lighting and other loads in the MCB DB ISI marked complete with connections testing and commissioning etc. as required as per SLD. SINGLE POLE.

Providing and fixing of following capacity TP& N disconnector fuse switch unit inside existing cubical panel board with ISI marked HRC fuses including drilling holes in cubical pannel, makinfg connection etc as required. 63 Amp TP & N.

Supplying and fixing of 16 / 18 SWG metal box of following sizes (nominal size) on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required. 75 mm x 75 mm x 60 mm deep.

100 mm x 100 mm x 60 mm deep.

150 mm x 75 mm x 60 mm deep.

200 mm x 250 mm x 75 mm deep.

Supplying and fixing of following Modular type switch / socket on the existing switch box / cover including connections etc as required. 3 pin 5 / 6 amp socket outlet.

6 pin 15 / 16 amp socket outlet.