Water Corporation Of Odisha Tender

Fly Ash brick work in cement mortar (1:6) in Foundation & Plinth using Fly Ash bricks of approved quality including cost, conveyance & royalty of all metarials etc complete as per direction of the Engineer-in-charge.

Fly Ash brick work in cement mortar (1:6) in Superstructure using Fly Ash bricks of approved quality including cost, conveyance & royalty of all metarials etc complete as per direction of the Engineer-in-charge.

2.5cm. Damp proof course with C.C (1:2:4) using 12mm. size crusher broken granite chips including cost of all labour, materials with all taxes, lead, T & P etc all complete.

Reinforce Cement concrete (1:1.5:3) with 12mm size crusher broken hard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete.

Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of all labour, materials , lead, T & P etc all complete. (I) R.C.C. Foundation, Plinth Band, Footings, Column Base, Mass Concrete & Precast Slabs

R.C.C. Beams, Column, Grider and Bressmer

R.C.C. Lintels

Floor & Roof Slabs, Landings, Balconies, Projecting, Sun Shades and Chajja

Supplying, fitting and placing uncoated HYSI) bar reinforcement complete as per drawing and technical specification .

2.5 cm A.S. flooring with cement concrete (1:2:4) including punning using 12 mm to down graded chips H.G.including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

12 mm thick plaster with cement mortar (1:6) over brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

16 mm thick plaster with cement mortar (1:6) over stone/brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

Providing rajshri brand factory made internal PVC Door frame manufactured by M/S Rajshri of the size 90mm x 45mm with a wall thickness of 5mm (±0.25) plain/prelam PVC foam sheet manufacture by an ISO-9001-2008 certified company. Meter cut at two corners and joined with 4nos. of 150mm long brackets of 15 x 15 M.S. square tube of 19 gauge through out the frame. The door frame fixed with wall using 65/100mm long M.S. screws through the frame by using PVC fastners. A minimum of 4nos. of screw to be provided for each vertical member and minimum 2nos. for horizontal member and 30mm thick ”RAJSHRI” BRAND FACTORY MADE MOULDED DOOR SHUTTER-WOOD FREE consisting of frame made out of M.S. tube of 19 guage thickness and size of 20mm x 40mm for stiles as well as top, bottom, & lock rail. M.S. frame shall have a coat of metal primer of approved make and manufacture. The inside panel shall consists of 20mm thick multichamber hollow PVC section of 1mm thickness, bonded using solvent cement/cyanoacrylate Adhesive with 5mm (±0.25) manufactured by an ISO-9001-2008 Certified company with 2,4,6 raised panel design in plane/prelam PVC sheet to be pasted with solvent cement/cyanoacrylate adhesive on other side of hollow PVC section. All the four edge of panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet of door, 20mm thick (5mm x 4 nos) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3nos. stainless steel butt hinges of size 100mm x 25mm x 2mm and 50mm long steel screws drilled suitable to pass through both the wall of the MS tube. Other hardwares should be fixed with 25mm x 8mm sixe steel screws etc, complete as per direction of Engineer-in-charge, manufactures specification and drawing.

Painting wall surface new/old with water proofing cement paint of approved shed 2coats to produce an even shape including curing for required period complete with all cost of materials, labour, T & P and scaffolding as directed by the Engineer-in-charge.

Iron work wrought and put up in window grating including drilling holes in choukathas including cost of all labour, materials with all taxes, lead,T & P etc all complete .

Supplying fitting fixing of UPVC window (sliding type) made as window frame section number 4095,4096 & 9777,3994 as shutter frame with 5mm thick plane glass as pannel fitted with rubber bending including locking arrengement including all fittings including cost of materials all taxes labour T & P excluding cost of glass etc complete as per direction og Engr-in-charge .

ELECTRICAL PORTIONS, POINT WIRING :- Supply, Installation, Testing & Commissioning oflight/Fan/Exhaust Fan point in 20mm dia medium gauge ISI marked Good quality PVC pipe with 1.5 sq.mm PVC insulated Cu.wire (2 run) & 1.0 sq.mm PVC insulated Cu.wire (1 run) for running earth complete with 1 no .6Amp.1way plate type Modular switch (Polycarbonate) , 1 no fan regulator and G.I box of adequate size including PVC bend, saddle, elbow, etc and other necessary materials & labour complete as per the direction of Engineer-in-Charge. Group-A (up to 2mtrs)

Group-B (up to 4mtrs)

Group-C (up to 6mtrs)

Secondary Point(Only wire from 1Lt Point to Another Lt Point-Upto 3mtr) .

Circuit or Sub-main wiring in 20/25/32/50mm dia. good quality ISI mark PVC Conduit with following sizes PVC insulated un-sheathed 1100V,Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (MAKE- FINOLEX/ / HAVELLS) (2 x 1.5 + 1 x 1.0) sq.mm copper wire.

Supply, Installation, Testing & Commissioning of 1 ph. 16 way,Single pole and Neutral, sheet steel MCB double horizontal door distribution box complete with tinned copper busbar, neutral link, earth bar, din rail, detachable gland plate includingcommissioning including all other materials etc. as required. - as per SLD.(MAKE- LIGRAND)

Supply, Installation, Testing & Commissioning of 6 amp to 32 amp rating 240 V "C" series miniature circuit breaker suitable for lighting and other loads in the MCB DB ISI marked complete with connections testing and commissioning etc. as required as per SLD. SINGLE POLE

Supplying and fixing of 16 / 18 SWG metal box of following sizes (nominal size) on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required. 100 mm x 100 mm x 60 mm deep

150 mm x 75 mm x 60 mm deep

Supplying and fixing of following Modular type switch / socket on the existing switch box / cover including connections etc as required. 3 pin 5 / 6 amp socket outlet