The Orissa State Cooperative Milk Producers Federation Limited Tender

Providing, supplying & laying in position machine mixed plain cement concrete in volumetric proportion (1:3:6) of any thickness for volumetric proportion 1: 3: 6 (1cement: 3 coarse sand: 6 HG stone crusher broken stone aggregates of size 37mm and down) in required thickness, for foundations, below walls, hard park, column footings, sunk floor, terraces, rafts, roads at any height above plinth level, at any depth below floors, plinth protection, etc. excluding centering and shuttering, if required, laying, spreading, ramming, consolidating, as per requirement and curing etc. including cost of all materials, transportation, loading, unloading, labour, T&P, taxes, duties, levies, octori, royalties etc. complete as per direction of Engineer- in-charge.

Providing, supplying & fixing plywood shuttering for any shape and size as specified in Architect's Drawing including rigid & smooth shuttering centering, bracing & propping, housing, keeping the same in position, providing access, and removal of the same after specified period, cost of all material, carpentry works, nails, including laying of polytheen over the shuttering and including cost of transportation, loading, unloading, of all materials and labour, T&P, taxes, duties, levies, octori, royalties etc. complete as per direction of Engineer –In-Charge.

Providing, supplying & laying in position machine mixed and machine vibrated cement concrete of controlled grades of specified volumetric proportions, for reinforcement cement concrete structural elements, viz. foundation, columns, beams, slabs, precast slab, raft, floor, plinth beam, window sills, coping, walls, parapet, drops, fins, boxes, gutters, folded plates, chajhas, overhead and under ground water tanks, culverts etc. at different levels in any shape as per structural design and as directed in specified compressive strength expressed in N/sqmm at 28 days as per I.S: 456-1978 using 20mm and down size of hard crusher broken black granite aggregates, necessary lift and lead finishing concrete surfaces, and for volumetric proportion 1:1 1/2: 3 (1 cement : 1 1/2 : coarse sand: 3 HG stone aggregates of size 20mm ) and down concrete in ground and plinth etc. excluding cost of centering and shuttering / centering & reinforcement and including cost of all material but excluding cost of reinforcement and including cost of curing, transportation, loading, unloading, of all materials and labour, T&P, taxes, duties, levies, octori, royalties etc. complete as per direction of Engineer –In-Charge.

Providing, supplying and constructing brick masonry in CM 1:6 (1 cement: 6 coarse sand) in foundation and upto plinth level with 1st class quality approved FLY ASH bricks having minimum crushing strength 70kg/sqcm including soaking the bricks in water vat for 24hoursbefore use in foundation at all levels below and upto highest plinth level, all necessary scaffolding, racking out the joints, including cost of all materials, transportation, curing, loading, unloading, labour, T&P taxes, duties, levies, octroi royalties etc. complete as per direction of Engineer in-charge.

Providing, fabricating and fixing in position steel reinforcement for RCC structural elements, viz. foundation, columns, beams, slabs, precast slab, raft, floor, plinth beam, window sills, coping, walls, parapet, drops, fins, boxes, gutters, folded plates, chajhas, mullions, overhead and under ground water tanks, road pavement, kerbs, culverts, etc. at different levels in any shape as per structural design and drawing and as directed and specified, as per design at all levels including lift and loading, unloading & transporting steel within site premises from departmental store to the work site, unloading and incidental charges for handling, cutting, bending and binding at all height and floor with 16 gauge GI wire (to be supplied by the contractor at his own cost), welding if necessary etc., labour, T&P complete as per direction of Engineer-in-charge. Pre-measurement will be made on the length basis and converted into weight by using standard IS co-efficient with Tor steel bars

Providing, supplying & fixing plywood shuttering for any shape and size as specified in Architect's Drawing including rigid & smooth shuttering centering, bracing & propping, housing, keeping the same in position, providing access, and removal of the same after specified period, cost of all material, carpentry works, nails, including laying of polytheen over the shuttering and including cost of transportation, loading, unloading, of all materials and labour, T&P, taxes, duties, levies, octori, royalties etc. complete as per direction of Engineer –In-Charge. a) For structural elements, viz. footing foundation, columns, beams, slabs, precast slab, raft, staircase, plinth beam, gutter, bed block, lintels, window sills, coping, walls, parapet, drops, fins, boxes, gutters, folded plates, chajhas, overhead and under ground water tanks, culverts etc. at different levels in any shape as per structural design and as directed

Do- as per ITEM NO.-6 WITH RCC of plinth but for volumetric proportion 1: 1 1/2: 3 (1cement: 1 1/2 coarse sand: 3 HG crusher broken stone aggregates of size 20mm and down) concrete at all level above highest plinth level. upto 1st floor

Do- as per items no 7.0 but in superstructure at all height above highest plinth level upto all height upto 6.0M( Ground floor)

Providing, fabricating and fixing in position steel reinforcement for RCC structural elements, viz. foundation, columns, beams, slabs, precast slab, raft, floor, plinth beam, window sills, coping, walls, parapet, drops, fins, boxes, gutters, folded plates, chajhas, mullions, overhead and under ground water tanks, road pavement, kerbs, culverts, etc. at different levels in any shape as per structural design and drawing and as directed and specified, as per design at all levels including lift and loading, unloading & transporting steel within site premises from departmental store to the work site, unloading and incidental charges for handling, cutting, bending and binding at all height and floor with 16 gauge GI wire (to be supplied by the contractor at his own cost), welding if necessary etc., labour, T&P complete as per direction of Engineer-in-charge. Pre-measurement will be made on the length basis and converted into weight by using standard IS co-efficient with Tor steel bars

Providing, supplying and laying 6mm thick glazed ceramic tile coloured / white of size 200x100mm or 200x150 of approved make such as "Johnson & Johnson or Somani brand " in dado / skirting to any height in all floors fixed with neat cement slurry after soaking the tiles in water, under layer of 12mm thick CM (1:3) mix, (The rate shall be inclusive of center point firing i.e. extra labour materials etc. to be considered so as to get outlet of plumbing / sanitary fitting at the junction of floor tile), with white cement pointing in joints including washing and cleaning polish with oxalic acid, including cost of all materials, transportation, curing, loading, unloading, labour, T&P, taxes, duties, levies, octroi, royalties, etc. complete as per direction of Engineer-in-charge

Providing, supplying and applying 20 mm thick cement plaster in line and level, at all heights above and below plinth level with cement motar 1:4 (1 cement: 4 sand) to walls, beams, ceiling, stair, column, pardis, bends, moulds, pattas, grooves, etc. including scaffolding, curing, finishing smooth (the plaster surface shall be troweled till the surface shows cement paste), and chipping the concrete at all levels including cost of all materials, transportation, lift, loading, unloading, curing, labour, tools and plants, taxes, duties, levies, octroi, royalties etc. complete as per direction of Engineer – In-Charge

Providing, supplying & applying two or more coats of coats of emulsion paints (Water based ) to of approved make and shade of “Royale Luxury Asian” including cost of Finishing existing wall surface with two more coats of Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges on smooth plaster finished surfaces of walls, beams, ceiling, stair, column, pardis, bends, moulds, pattas, grooves etc. at all heights above plinth level and preparation of surface for painting, scaffolding, curing etc., including cost of all materials, transportation, loading, unloading, labour, T&P, taxes, duties levies, octroi, royalties etc. complete as per direction of Engineer - In-Charge

Providing , Supplying & Fixing UPVC glazed ,2- track channel, sliding window with frames and shases shall be from white UPVC profile which shall have 3 hollow chambers from front to back depth of 65/118mm. All section of frame and shades shall be reinforced with galvaniz mild steel in single continious length, window shall be such that glazing or reglazing on site possible without the need remove the outer frame from the structure of the building. The glazing must be used 5mm thick reflective glass complete in all respect as per the direction of the Engineer-In -Charge. FOR WINDOW

Providing , Supplying & Fixing UPVC glazed ,2- track channel, sliding window with frames and shases shall be from white UPVC profile which shall have 3 hollow chambers from front to back depth of 65/118mm. All section of frame and shades shall be reinforced with galvaniz mild steel in single continious length, window shall be such that glazing or reglazing on site possible without the need remove the outer frame from the structure of the building. The glazing must be used 5mm thick reflective glass complete in all respect as per the direction of the Engineer-In -Charge. FOR DOOR

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conferming to IS : 15778,having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1.00m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. 20mm. dia CPVC pipe [Sch-80.]

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conferming to IS : 15778,having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1.00m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. 25mm. dia CPVC pipe [Sch-80.]

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conferming to IS : 15778,having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1.00m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge 32mm. dia CPVC pipe [Sch-80.]

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conferming to IS : 15778,having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1.00m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge 40mm. dia CPVC pipe [Sch-80.]

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conferming to IS : 15778,having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1.00m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge 50mm. dia CPVC pipe [Sch-80.]

Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipe conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion, (i) single socketed pipes 75mm diameter

Supplying all materials,labour and T&P for laying in trenches unplasticized PVC pipes and specials of the following outside dia. for all classes including jointing with approved solvent cement by non-heat application method including testing as per specification and direction of Engineer-in-charge etc. all complete. [including earth work and cost of pipes ] 32mm.dia. PVC pipe

Supplying all materials,labour and T&P for laying in trenches unplasticized PVC pipes and specials of the following outside dia. for all classes including jointing with approved solvent cement by non-heat application method including testing as per specification and direction of Engineer-in-charge etc. all complete. [including earth work and cost of pipes ] 40mm.dia. PVC pipe

Supplying all materials,labour and T&P for fixing wash hand basin with hole for pillar cock with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification.[3.3.12./344] (including cost of wash hand basin and all accessories. )

Supplying all materials,labour and T&P for fixing of 600x450 bevelled edge mirror of superior glass mounted on 6mm thick ac sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc. All complete as per specification [ 3.3.24/357]

Supplying all materials,labour and T&P for fixing standard size glass self with chromium plated brass brackets and guard rails fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per specification.[3.3.28./358]

Supplying all labour and T&P for fixing Brass screw down Stop cock/ Gun metal Full way valve of the following size as per specification all complete (excluding cost of valve ) [data for 10 nos.][2.5.12/264] 20mm fullway valve

Fixing of Brass Screw Down Bib Cocks (Taps) polished bright conferming to IS-781-1995 of the following nominal sizes as per specification complete.15MM CP LONG BODY BIB COCK WITH FLANGE.

Fixing cromium plated brass soap dish complete with cromium plated brass brackets fixed to wooden plugs with cromium plated brass screws as per specification.

Fixing PVC Waste Pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specification.

Fixing Cromium plated Waste of following nominal diameter for wash basin and sink as per specification.

Fixing 15mm dia PVC inlet connection Pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specification.

Supplying all materials,labour and T&P for fixing cast (spun) iron floor traps of the following nominal diameter of outlet, of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm including cutting holes in walls and making good to the damages etc. all complete as per specification.[3.3.17./352] (including cost of cast iron trap and grating. ) Floor trap (100mm.x50mm. dia.)

Supplying all materials,labour and T&P for fixing of Sintex 1000 Litre White Virgin Plastic Triple Layer Overhead Water Tank (fitting with pipeline is on the bidder scope) etc. All complete as per specification

Constructing Septic tank chamber of inside size (2.4x1.2x1.8m) with RCC top slab in RCCM20, foundation concrete (1:3:6), inside & ouside plaster 12 mm thick cement mortar (1:4) finished with neat cement punning, brick work with flyash brick having crushing strength not less than 75kg/cm² with dimensional tolerance ±8 percent in cement mortar (1:4) cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification.

A Light Point wiring with 2.5 sq.mm. PVC insulated Copper conductor 650V grade wires in 25 mm dia 16 SWG surface/concealed conduit system including providing and fixing one no. 6 Amp. Single pole piano key switch in M.S. box with 3mm thick hylem sheet cover complete with 2.5 sq.mm. Circuit for one light pint controlled by one switch.

Exhaust fan point wiring with 2.5 sq.mm. PVC insulated Copper conductor,FRLS wires in 25mm dia, 16 SWG surface/concealed conduit system including providing and fixing one no. 6 Amp. modular switch in M.S. box with modulart cover complete with 2.5 sq.mm. circuit.

Circuit wiring with PVC insulated 650V grade, Copper conductor wire for power and green PVC insulated copper conductor for earthing in 16 SWG surface/concealed conduit system, complete with MS draw out boxes and cover, wires and conduit sizes as given below: 2 x 2.5 sq.mm. for power and 1x1.0sq.mm. for earthing in 25mm dia conduit (from BDB to individual switch board)

Circuit wiring with PVC insulated 650V grade, Copper conductor wire for power and green PVC insulated copper conductor for earthing in 16 SWG surface/concealed conduit system, complete with MS draw out boxes and cover, wires and conduit sizes as given below:2x4 sq.mm for power and 1x1.0 sq.mm. for earthing in 25mm dia conduit (from BDB to individual 16 A power socket)

Supply, installation, testing and commissioning of company made distribution board of approved make and making good to all damages caused and inter connection with 2.5 sq.mm. Copper wire and complete with all respect fixing in the wall. Light distribution board , Incoming: 8A DP MCB : 01 Nos. Outgoing: 8A SP MCB : 2nos.

Supply of standard modular LED lamp 20 watt each make Philips /Bajaj

Supply of heavy duty, single phase, 900-RPM exhaust fan complete with all accessories including louvers. size of fan 450 mm dia of makes – Bajaj./EPC/Crompton/Khaitan/Usha