The Odisha Small Industries Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 2,27,500Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_OSIC_104711_2Tender No
OSIC/Constn./2024-2025/01Tender Authority
The Odisha Small Industries Corporation Limited ViewPurchaser Address
-Website
http://http://www.osicltd.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate 20 mm nominal size ) of approved quality from quarry mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. & including the cost of centering and shuttering all complete as per the directions of Engineer-in-charge.
1.17
5764
4926.8
Filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20 cm in depth , consolidating each deposited layers by ramming and watering, lead up to 50m and lift up to 1.5 mt etc. including cost of all labour, sundries T & P etc complete in all respect as per the direction of Engineer-In-Charge.
81.36
8054
99
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
4.95
21450
4333.4
RCC work M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 % ) to be mixed in concrete mixture with approved grade cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost of centering & shuttering as per direction of the Engineer in charge.Foundation and plinth
28.04
152189
5427.6
Ground Floor
6.77
36744
5427.6
First Floor
5.66
31220
5516
Terrace Floor
1.63
9156
5617.7
Providing, fixing in position TMT Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.). Foundation and plinth
33.65
288780
8581.9
Ground Floor
8.81
75606
8581.9
First Floor
7.36
63345
8606.7
Terrace Floor
2.12
18301
8632.8
Providing steel centering and shuttering(steel/ ply) to required shape and size for all kinds of R.C.C. works centering materials with all necessary bracing, ties and supports with level centering covered with 50 micron polythene sheet/bituminous paper . as per the direction of the Engineer -in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete.Footing
52.8
5464
103.5
Plinth Beam
29.62
3065
103.5
Foundation and plinth
26.88
20423
759.8
Column
41.7
31683
759.8
Roof Beam
12.07
9170
759.8
Roof Slab
23.63
10416
440.8
Lintel
0.89
239
269.4
Roof Slab
48.93
25879
528.9
Lintel
16.39
5298
323.3
Fin
45.05
30198
670.4
Supplying, Providing, Fabricating, Assembling, hoisting, erecting and placing in position MS Built-up section/ Tubular Structure (MS) confirming to Grade Yst 240-310, Tubular Structure:- made from steel hollow sections, ISI marked from SAIL/ RINL/ TATA/ JINDAL/APPOLO confirming to IS 1161/4923, thickness upto 10mm) in the profile shape as per drawings with special plate connector, pinion joints, Plates, hollow sections, etc and applying a coat of enamel primer and paint , and including Preparation of detailed fabrication and erection drawings of Structural steel work from design drawings issued by Engineer- in- charge and incorporation of Engineer-in-Charge’s comments on same, transportation from fabrication yard, cutting, threading, machining, leads and lifts upto all heights, tools and plants and necessary scaffolding etc.Ground Floor
3091.09
448207
145
First Floor
3703.09
536948
145
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .Ground Floor
20.14
87939
4366.4
First Floor
44.76
207910
4645
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:4). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
4.56
21235
4657.3
Supplying, fitting and fixing in position well seasoned & dressed Sal wood choukhats in doors free from defects such as dead knots, flows etc. in all floors including two coats of termite proof wood preservatives to Rear surface of frames which is in contact with concrete and masonry surface fitted with 6 nos. of W.I. Clamps and required screws of approved quality including cutting legs to sizes, cutting holes in walls, fixing in CC 1:2:4 including cost, conveyance, royalties and taxes of all materials and cost of all labour, sundries, T & P etc. required for the workall complete as per the directions of Engineer -in-charge.Ground Floor
1.16
57309
49245.4
First Floor
0.58
28562
49245.4
Providing 16mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge.Ground Floor
589.88
123048
208.6
First Floor
486.43
103950
213.7
Terrace Floor
46.85
10260
219
Providing 12mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge.Ground Floor
1254.45
183274
146.1
First Floor
557.81
83449
149.6
Terrace Floor
34.06
5214
153.1
Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge.Ground Floor
219.27
35609
162.4
First Floor
240.68
40000
166.2
Terrace Floor
12.32
2095
170.1
Providing average 25mm thick grading Concrete with (1:2:2) using 6mm black hard granite chips using 2% water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface, plastering and finishing smooth to proper slope and gradient including cost of all materials, conveyance and sundries, T&P etc. complete as per direction of the Engineer -in-charge. Ground Floor
91.58
28289
308.9
First Floor
401.82
137180
341.4
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-incharge. The product performance shall carry guarantee for 10 years against any leakage.Ground Floor
493.4
161543
327.41
Supplying, Fitting, Fixing Vetrified Tile (600 x 600) of approved make confirming to IS 13755 in floors treads or steps and landing laid on 25mm thickbed of cement mortar1:4(1cement : 4sand) filling joints with white cement of approved quality including cost of all materials labour T & P etc required for the work all complete as per direction of Engineer in Charge. Ground Floor
292.07
288647
988.3
First Floor
353.58
353084
998.6
Supplying, Fixing Double charged Vetrified Tiles (600 x 600)in Dados Skirting & Risers of Steps of 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost of all materials labour T & P etc required for the work all complete as per direction of Engineer in Charge. Ground Floor
55.79
59088
1059.2
First Floor
28.27
30374
1074.6
Providing & Fixing Floor tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete.Ground Floor
31.7
29585
933.3
First Floor
21.6
20362
942.7
Providing and fixing UniStone or equivalent Glass reinforced concrete (G.R.C)BRICK tile in approved pattern i.e. ‘red’ , shade and size different textures of natural brick. The GRC brick tile shall have texture and shade of natural brick. The thickness of GRC brick tile shall be between 12 -14mm having weight of approximately 3–3.5 Kg per Sq Ft. The GRC brick tile should be made from ‘43 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ LANXESS or equivalent. The material casting should take place in FRP Molds.. The fixing of GRC brick tile should take place on rough plastered surface of 1:3 (cement: coarse sand) with Dual fixing procedure i.e. exterior grade Cement polymer based tile adhesive ‘UniStone Ultimate’ or equivalent to be applied with exterior grade cement polymer based grout in matching brick tile shade to be used to tile group as per the detail design including the cost of all materials, labour, overheads and T & P etc. complete .as per the direction of the Engineer in charge. Ground Floor
286.87
550913
1920.4
First Floor
268.15
514953
1920.4
Terrace Floor
25.71
49375
1920.4
Providing & Fixing Glazed Tiles in Dados Skirting &Risers of Steps of 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete.
79.74
181456
2275.6
First Floor
301.5
690736
2291
Supplying fitting and fixing in position 32mm thick single leaf Grade-1 flush door confirming to IS:2202 (part 01/1991) with select seasoned timber and block board core framed with seasoned hard wood battens and bonded at high pressure with phonol formaldehyde resin under the cross banding process, termite resistant and moisture proof, including cost, conveyance, taxes of all materials with 1mm thick laminate of approved make on both side & 8 mm thick eitching glass in the middle portion with melamine polish,1no of Aldrop, 3 nos of SS butt hinges, 2 nos of tower bolt, PVC door stopper, Buffer & SS handle as per the lay-out drawing and specification given by the Architect, Including all cost of labour, material, conveyance, loading, unloading, T&P and painting the wooden surface with an approved shade and finish etc all complete as per directions of Engineer-in-charge.
43.92
232730
5298.96
First Floor
19.44
103011
5298.96
Supplying, fitting, fixing up window (sliding type) made up aluminum Section 151-154, 151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick glass as panel fitted with rubber bending including lucking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.
40.5
230598
5693.8
First Floor
36.45
207539
5693.8
Terrace Floor
2.25
12811
5693.8
Providing and fixing of Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 5 mm reflective with all taxes complete.
1.8
6658
3698.91
First Floor
1.8
6658
3698.91
Providing, fitting & fixing M.S grill fabricated from 12mm and 16mm square bars as per approved drawing and design including cost, conveyance & taxes of all materials, fabrication charges, fixing in position to RCC columns / walls in cement concrete (1:2:4) and making good to the damages complete as per direction of the Engineer-in-charge. The rates shall be inclusive of all cost of Materials, labour, T&P Shuttering etc complete
810
68850
85
First Floor
729
61965
85
Terrace Floor
40.6
3451
85
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
29.7
17155
577.61
First Floor
24.75
14295
577.61
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin,moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856,complete as per direction of Engineer-in-charge.
9.45
31591
3342.98
First Floor
7.88
26342
3342.98
Painting synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats on new work over a coat of suitable shade with primer of approved brand as per manufacturer's specification including cost of all materials with taxes and transportation, all labour, scaffolding, sundries, T&P etc. All complete as per the direction of the Engineer -in-charge.
95.42
18734
196.34
First Floor
91.37
18593
203.5
Terrace Floor
2.03
426
210.7
Painting two coats with Water soluble weather coat paints of approved shade of approved make or equivalent over out side brick wall over a coat of primer, by means of brush to outside surface of new walls after scraping, cleaning the surface including all cost of materials, scaffolding, labour, watering & curing T&P etc complete as per direction of Engineer -in-charge.
589.88
76330
129.4
First Floor
486.43
64987
133.6
Terrace Floor
46.85
6460
137.9
Distempering two coats to walls with two coats of putty and one coat of primer on the plastered surface by means of rollers to give an even shade including cost of all materials, labour, conveyance, taxes, royalties, scaffolding, sundries, T&P etc, All complete as per the direction of the Engineer-in-charge
1473.72
301964
204.9
First Floor
798.49
166565
208.6
Terrace Floor
46.38
9855
212.5
Providing fitting and fixing of false ceilling with Aluminium anodised T Section No. 3215 with 2'-0" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixied by means of steel screw & P.V.C plug & the Aluminium grid 2'-0"x2'-0" suspended from ceiling etc complete.
584.63
774164
1324.2
Providing and fixing Glass Reinforced Concrete ( GRC) Screens in approved size, pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have waight approximately between 3.5 - 4 kg per sqft. And colour of M/S Unistone make or equivalent. The above waight and thickness is considering dimensions of screens upto 2133 mm in height and 1219mm in width and having at least 50% void space. The screen should be made from 53 grade white portland cement manufactured by JK cement or equivalent , Quartz, Fine Silica Sand, Alkali resistant glass fiber manufactured by N.E.G JAPAN or equivalent, super plasticizers manufactured by BASF or equivalent, polymers manufactured BASF or equivalent and U.V resistant synthetic inorganic pigments should be used for pigmentation manufactured by BAYFERROX ( Germany) or equivalent. The material casting should take place in FRP Molds. The fixing of screen should be Dry fixing i.e to be done with M.S glvanized clamps, fixtures and fasteners of Hilti / Fischer.
44.3
311792
7039
Providing & fixing Roller blind of Sun screen quality to allow diffused sunlight into the space with approve shade, texture & patten of approved makes for Mac / Marvel / Vista with necessary hardwares like pully, bearing thered and roller complete in all respect with all cost ,labour,T & P,Taxes etc as per direction of the Engineer - in - charge.
40.5
172692
4264
First Floor
36.45
155422
4264
Providing and fixing of fixed Glazing with part Top hung of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS- 513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint pecification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. should be of 46 x 46 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 5mm reflective with cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.
12.75
64414
5052.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
720.42
90599
125.76
M.S Steel plate welded in built up sections/ framed work using M.S steel plate & M.S Jali CNC cutting work, including hoisting, fixing in position and applying a priming coat of approved steel primer & syenthetic enamel paint two coats etc. as required.
38.66
266249
6886.4
Electric resistance or induction butt welded tubes
Providing and fixing factory made single extruded WPC (Wood
Polymer Composite) Panneling of virgin PVC polymer of K value 58-
60 (Suspension Grade), calcium carbonate and natural fibers (wood
powder/ rice husk/wheat husk) and non toxic additives (maximum
toxicity index of 12 for 100 gms) fabricated with miter joints after
applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),
minimum compressive strength of 58 N/mm2, modulus of elasticity
900 N/mm2 and resistance to spread of flame of Class A category
with property of being termite/borer proof, water/moisture proof and
fire retardant and fixed in position with M.S hold fast/lugs/SS dash
fasteners of required dia and length complete as per direction of
Engineer-In- Charge.
150 mm wide Frame
243.6
459429
1886
First Floor
173.85
327881
1886
Partition Walling with Alm anodised sec. 9210& 9207 as single groove & double groove respectively as horizontal & vertical member and section 4660 as tappered clip and jointing angle no 1855 etc with 12mm prelaminated Novapan board including cost of materials, cost of all labour, T & P etc. complete as per the direction of Engineer in charge.
268.18
865119
3225.89
First Floor
217.85
702760
3225.89
Providing and fixing 200mm stainless steel fancy handle with screws of approved make etc. complete as per direction of Engineer-in-charge.
25.88
3962
153.15
First Floor
5.63
861
153.15
Providing and fixing Table with 200mm stainless steel fancy handle with screws of approved make, stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with SS screws etc. complete as per direction of Engineer-in-charge.
30.05
565789
18830
First Floor
83.48
1572003
18830
Supply & installation of ASTRO MBGS ADJ ARMS of Godrej make or equivalent from Wipro or Durian including all cost ,labour, T & P,Taxes etc as per direction of the Engineer - in - charge.
20
244140
12207
First Floor
46
561522
12207
Supply & installation of FIXED ARMS CHAIRS of Godrej make or equivalent from Wipro or Durian including all cost ,labour, T & P,Taxes etc as per direction of the Engineer - in - charge.
23
263902
11474
First Floor
59
676966
11474
Supply & installation of CUSHIONED THREE SEATER (PUBLIC SEATING)of Godrej make or equivalent from Wipro or Durian including all cost ,labour, T & P,Taxes etc as per direction of the Engineer - in - charge.
4
97444
24361
First Floor
4
97444
24361
INTERNAL WATER SUPPLY & SANITARY INSTALLATION WORKS
Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. as per specification and direction of Engineer in-charge.
Make:SUPREME/ASHIRVAD/ASTRAL20mm dia(Oriplast/Supreme/Astral)
25.5
3100
121.6
25mm dia(Oriplast/Supreme/Astral)
32.1
4920
153.3
32mm dia(Oriplast/Supreme/Astral)
36.74
7318
199.2
40mm dia(Oriplast/Supreme/Astral)
41.87
9215
220.1
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR-11)conforming to IS 15778, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer- in-Charge .40mm dia
5
2714
542.9
32mm dia
5
2057
411.5
25mm dia
5
1442
288.5
20mm dia
5
1026
205.2
15mm dia
5
794
158.9
Providing and fixing to wall or ceiling, floor and below ground UPVC- ASTM Standard (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete.50mm dia
45.2
20014
442.8
40mm dia
67.3
22579
335.5
32mm dia
71.45
19684
275.5
25mm dia
95.74
19751
206.3
20mm dia
98.1
15529
158.3
15mm dia
5
791
158.3
Supplying, fixing and testing Ball Valve UPVCSch-80 (Solvent welded with Metal ball) all material, labour, T&P & fitting, and fixing the following different water supply fittings including supply of all necessary jointing materials etc. all complete as directed by the Engineer -in - charge. 50mm dia
4
10406
2601.57
40mm dia
6
9923
1653.87
25mm dia
6
3779
629.85
32mm dia
8
10369
1296.17
20mm dia
8
3833
479.15
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per specification & direction of the Engineer-in-charge.
150
7995
53.3
Cutting hole in R.C.C floors and roofs upto 19 cm thick for passing G.I / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof complete as per the direction of the Engineer-in-charge.
30
5481
182.7
Providing all materials labour, T&P for Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification & as per specification & direction of EIC.
264.87
49159
185.6
Providing all materials, labour,T&P ,fittings and fixing of different water supply (CP on Brass) fitting (Quarter Turn or as specified) as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in-charge.15mm dia Angle Stop cock with Wall Flange. (As per Cat no.FLR-CHR-5053N of Jaquar)
22
26693
1213.34
15mm dia Pillar Cock (As per Cat no.PRS-CHR-031 of Jaquar)
11
8301
754.7
15mm dia CP Brass long body Bib Cock (As CODE CON-107KN Jaquar make)
11
17330
1575.54
Bib cock with wall Flange. (As per Cat no.FLR-5047N of Jaquar)
11
845
76.9
15mm dia CP Brass Short Body Bib Cock
11
7693
699.4
Two-way Bibcock with wall Flange. (As per Cat no.FLR-5041N of Jaquar)
11
15186
1380.63
15mm dia CP Push Cock (As per Jaquar make)
11
19250
1750
Fixing of Screw-down SINK Cocks (Taps) polished bright conforming to (JAQUAR MAKE) with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Head& high quality),(15mm diameter Sink Cock (CODE CON-347KN).
(Ground Floor)
2
3833
1916.65
Providing all materials, labour, T&P forFixing of Brass Ball Valve (Horizontal plunger type) conforming to IS 1703-1977 as per specification all complete as per specification and direction of Engineer-in-charge..15mm dia Brass ball valve
4
1612
403
25mm dia Brass ball valve
6
4142
690.4
32mm dia Brass ball valve
6
7279
1213.2
40mm dia Brass ball valve
11
16241
1476.5
15mm dia PVC connecion pipe 450mm long
11
925
84.1
15mmx25mm C.P. Extension piece (As per Cat no. F8070301 of Cera)
11
1425
129.6
Providing and fixing circular type stainless steel jalli (grating) with hole for floor/nahani trap etc. complete as per specification and direction of the EIC.
11
805
73.2
Supplying all materials,labour, T&P and fixing Health Faucet ABS SS braided hose 1.00m with CP hook. (As per Cat no.ALD-CHR-585 of Jaquar)
11
18887
1717
Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge.2000 litre capacity water storage tanks
4
79535
19883.9
1500 litre capacity water storage tanks
4
62112
15528.2
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia u-pvc SWR pipe (Oriplast/Supreme/Astral)
65.4
19410
296.8
UPVC single equal Tee (with door) 110x110x110 mm (Oriplast/Supreme/Astral)
11
3043
276.7
110mm dia u-pvc offset (Oriplast/Supreme/Astral)
11
3647
331.6
110mm dia u-pvc door bend (Oriplast/Supreme/Astral)
11
2178
198
110mm dia u-pvc plain shoe bend (Oriplast/Supreme/Astral)
11
3084
280.4
110mm dia u-pvc vent cowl (Oriplast/Supreme/Astral)
11
557
50.7
110mm dia u-pvc p-Trap (Oriplast/Supreme/Astral)
6
1840
306.8
110mm dia u-pvc s-Trap (Oriplast/Supreme/Astral)
5
2130
426.1
110mm dia u-pvc plain bend (Oriplast/Supreme/Astral)
11
2178
198
Providing and fixing 40 mm dia waste Coupling (F/T) complete as per as per direction of Engineer-in-charge.
11
1226
111.48
Providing and fixing controlled flush, low level cistern made of vitreous china conforming to CNS-WHT-353 N& S /CNS-WHT- 755 (JAQUAR MAKE)with all fittings complete.
(Ground Floor)
11
18704
1700.4
Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to JAQUAR MAKE of brand code CNS-WHT-553SN and of viteros china make seat cover fixing to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification.
(Ground Floor)
11
41364
3760.44
Supplying all materials, labour & T&P for fitting and fixing of following sizes of white glazed vitreous china flat back half stall urinal basin confirming to specification of approved make as per IS-2556 with ISI mark in all floor along with supply & fixing of necessary component parts like pair of C.I./M.S. bracket including connection from water supply pipe with all taxes, duties, transportation etc. all complete as per specification & direction of the Engineer-in-charge. (Make:HINDWARE/PARRYWARE/CERA)
5
12634
2526.8
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth as per the direction of Engineer-in- charge.
4
10282
2570.7
Providing all materials, labour, T&P for fixing of following sizes of Prime mirror (60x45 cm)of 6mm thick mounted on 6mm thick AC back sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C.(Alpina/Golden Fish/Belgion)
11
7889
717.2
Fixing standard sized towel ring of JAQUAR MAKE complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification.(Towel Ring Round With Round Flange (BRAND CODE ACN-1121BN).
(Ground Floor)
11
10566
960.6
Fixing Chromium Plated soap dish Holder complete with Chromium Plated brass brackets fixed to P.V.C plugs with Chromium Plated brass screws as per specification.(JAQUAR MAKE,BRAND ACN-1131N).
(Ground Floor)
11
10249
931.79
Supplying and fixing standard size 32 mm CP Double Coat Robe Hook.
11
12184
1107.7
Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium Plated brass screws as per specification.(600mm Long glass shelf (JAQUAR MAKE BRAND ACN-1171N), (Ground Floor)
11
16403
1491.19
Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-B) for rain water of approved make confirming to IS-13592/1992.with ISI Mark in all floor.110mm dia pipe.(Make:supreme/Astral/Ashirvad)
75.3
22349
296.8
Supplying all materials, labour and T&P for fixing S.W. gully trap Grade-A complete with cast iron grating,brick masonry chamber (250x250mm.) with R.C.C. cover slab as per P.H. specification and design all complete. [ excluding cost of gully trap and grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
2
2885
1442.56
Supplying all materials labour & T&P for constructing of brick masonry gully trap chambers earth work in excavation in all kinds of soil, 250mm thick K.B. brick work in C.M. (1:5) with K.B. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punning including cost of RCPC cover slab etc. all complete as per approved P.H.E.D. specification and direction of Engineer-in-charge. (300mm x 300mm x 300mm deep)
2
6186
3093
Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design etc all complete as per approved specification and direction of the Engineer in charge
2
14547
7273.78
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
10
1891
189.1
110mm dia u-pvc pipe alround concrete
96.5
36544
378.7
125mm dia u-pvc pipe alround concrete
10
4490
449
160mm dia u-pvc pipe alround concrete
10
7323
732.3
Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.
2
25953
12976.6
Inside size 1200mm x 1200mm x 1100mm
1
18386
18386.9
Supplying all materials,labour,T&P and constructing soakway pit of the following size with precast RCC rings joined loose,gravel backing in the rear of well steining,precast Rcc cover slab in cement concrete (1:2:4) using 12mm size stone aggregates fitted with iron lifting handles including cutting holes in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works,watering,curing,conveyance of all materials to worksite etc. complete as per specification and direction of the EIC.Rcc rings soakway pit 1.20M Dia.x1.5M deep
3
40653
13551.2
INTERNAL ELECTRICAL WORK
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH PVC insulated copper conductor of ISI marked Make- RR KABEL/POLYCAB/HAVELLS with 20 mm dia PVC flexible non metallic conduit Make-AKG/KINJAL/POLYCAB with 6A modular type switch ISI marked Make-Make- Schneider(Clipsal X)/legrand( Arteor) /Havells (Crabtree) /Panasonic (Vision), and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with cover Make-Make- Schneider(Clipsal X)/legrand( Arteor) /Havells (Crabtree) /Panasonic (Vision), of suitable size, modular box with 1.5 sq. Mm FR PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital.SHORT POINT (GROUP-A)
60
35838
597.3
MEDIUM POINT (GROUP-B)
95
69597
732.6
LONG POINT (GROUP-C)
95
87048
916.3
Group control of point in Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH PVC insulated copper conductor of ISI marked Make- RR KABEL/POLYCAB/HAVELLS with 20 mm dia PVC flexible non metallic conduit Make-AKG/KINJAL/POLYCAB with 6A modular type switch ISI marked Make-Make- Schneider(Clipsal X)/legrand( Arteor) /Panasonic (Vision),and ceiling rose ISI marked Make- Make-Schneider(Clipsal X)/legrand( Arteor) /Panasonic (Vision), of modular type G.I box with cover Make-Make-Schneider(Clipsal X)/legrand( Arteor) /Panasonic (Vision), of suitable size, modular box with 1.5 sq. Mm FR PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit)
10
10769
1076.9
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Make-Schneider(Clipsal X)/legrand( Arteor) /Panasonic (Vision),
120
71280
594
Supplying,fixing of 1x16A+1X 6A Plug on the separate board with complete fitting by 02 no of 16A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make- Schneider(Clipsal X)/legrand( Arteor) /Panasonic (Vision),(For equipement power)
10
10450
1045
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make- Schneider(Clipsal X)/legrand( Arteor) /Panasonic (Vision),(For equipement power)
30
27522
917.4
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to PDB/LIGHT CKT)(2X1.5+1X1.5)
357.84
53139
148.5
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)
580.36
97036
167.2
Supplying & laying of 3.5CX50mm PVC insulated armoured and PVC sheathed AL. power cable of 1.1 KV grade of 50 Sqm.mm POLYCAB/HAVELLS/KEI of following size cables in ground including excavation,sand cushioning protective covering and refilling the trench and as per direction of Engg.-in-Charge.
285.1
161509
566.5
Supplying & laying of one number PVC insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade of 25 Sqm.mm POLYCAB/HAVELLS/KEI of following size cables in ground including excavation,sand cushioning protective covering and refilling the trench and as per direction of Engg.-in-Charge.
115.4
47856
414.7
Supplying & laying of (2X4mm Square+1X1.5mm Square) submain for floor mounted panel to BDB
POLYCAB/HAVELLS/KEI on surface as per direction of Engg.-in-Charge.
150
54285
361.9
Supplying & laying of one number PVC insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade of 3 core 6 Sqm.mm POLYCAB/HAVELLS/KEI of following size cables in ground including excavation,sand cushioning protective covering and refilling the trench and as per direction of Engg.-in-Charge.
160
48752
304.7
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable. Of 1.1 KV as per direction of Engg.-in-Charge.3.5 core x50 sq mm
8
7920
990
3.5 core x25 sq mm
8
5720
715
3.5 core x16 sq mm
8
4840
605
Providing,fixing and laying of fallowing dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.50 mm dia
87.3
39084
447.7
80 mm dia
92.12
47727
518.1
Supply, fixing, commionssioning & testing of main LT control panel floor mounted made out of 2mm thick CRCA sheet duly painted & powder coated with all associries as per GA drawing. Instrument arrangement- 3nos RYB indicating lamp with selecter switch, volt meter, Amper meter with AL. bus bar as well as cable allloy, separate earth terminal bus bar as well as 75mm base channel as per direction of Eingineer in Charge.
Incoming-250AMP 3 Pole MCCB. .(make-ABB/Siemens/SCHNEIDER/L&T ISI marked).
Outgoing- i) 63AMP 4Pole MCCB-2nos
ii) 40AMP DP MCB-4nos
Instrument arrangement- 3nos RYB indicating lamp with selecter switch, volt meter, Amper meter with AL. bus bar as well as cable allloy, separate earth terminal bus bar as well as 75mm base channel as per direction of Eingineer in Charge.
2
132000
66000
Supply, testing & commissioning of 8way BDB Make- Legrand/L&T/SIMENS
incoming-40AMP DP MCB-1no
outgoing- 25AMP SP MCB-6nos
8
61600
7700
Supply & fixing of earth elector having 40mm dia with 12nos hole as well as Franch with charcole & salt as per requirement having 10' excavated earth with brick chamber & CI cover
6
36933
6155.6
Providing and fixing 25mm x 3 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
48
30096
627
Providing and fixing 25mm x 5 mm copper strip ISI marked at 0.5Mtr below G.L as strip earth electrode. as required as per direction of Engg.-in-Charge.
54
32551
602.8
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.- in-Charge.
50.5
5166
102.3
Optimised pulse rod early streamer emission as per French standard BSEN 50164/2 accessories and NFC 17102 stainless steel air terminal with mounting accessories of MAKE ABB OR ERICO as per imported manufacture testing laboratory certification including all earthing and instalation.
1
150000
150000
supplying, erection, testing, inspection & fitting of 1.5tonne 5star AC with all necessary accessories as per the direction of Engineer-in-charge.
Make:-BLUE STAR/VOLTAS/CARRIER/LLOYD
18
810000
45000
Supplying, erection, testing, inspection & fitting of 1.0tonne 5star AC with all necessary accessories as per the direction of Engineer-in-charge.
Make:-BLUE STAR/VOLTAS/CARRIER/LLOYD
6
210000
35000
Supplying & fixing of 36watt Surface Light Similar to JAQUAR/Havells/WIPRO/Bajaj with all accessories.
Size: (600X600)mm
20
45100
2255
Supplying & fixing of 20watt Surface Light Similar to JAQUAR/Havells/WIPRO/Bajaj with all accessories.
Size: 234mm dia
44
72600
1650
Supplying & fixing of 15watt Surface Light Similar to JAQUAR/Havells/WIPRO/Bajaj with all accessories.
Size: 200mm dia
30
41250
1375
Supplying & fixing of 18watt Surface Light Similar to JAQUAR/Havells/WIPRO/Bajaj with all accessories.
Size: 150mm square light
30
46500
1550
Supplying & fixing of 40watt Suspended LED luminaire Similar to JAQUAR/Havells/WIPRO/Bajaj with all accessories.
Size: (1200X104X61)mm
20
92000
4600
Supplying & fixing of 12watt spot/focus light Similar to Philips/Havells/WIPRO/Bajaj with all accessories.
20
34500
1725
Supply and fixing of step type electronic fan regulator on existing modular plate switch box including connection but excluding modular plate etc as required Similar to JAQUAR/Havells/WIPRO/Bajaj with all accessories..
45
17325
385
Supplying and fixing of 1200 mm sweep ceiling fan with 300/600 mm standard down rod and electrical connection as required etc Similar to JAQUAR/Havells/WIPRO/Bajaj with all accessories..
45
99000
2200
Supply, Installation, Testing & Commissioning of 40 watt FTL patti fitting Similar to JAQUAR/Havells/WIPRO/Bajaj with all accessories.
50
35750
715
Supply, Installation, Testing & Commissioning of 8 watt LED Bulb Similar to Philips/WIPRO/Bajaj with all accessories..
50
5500
110
Supply, of 300 mm dia, 1320/1350 RPM, 72watt input power exhaust fan complete with mounting ring frame brackets, louvers shutters without regulator including connection from outlet with 3 core flexible cable as required Similar to Crompton/Havells/V-Guard/Bajaj/Usha with all accessories..
15
33000
2200
Supplying & fixing of Gate Light Similar to JAQUAR/Havells/WIPRO/Bajaj with all accessories.
2
15400
7700
Supply , fixing & termination of Outdoor Street Light LED Luminaire with 72w LED Lamp similar to JAQUAR/Havells/WIPRO/Baja with suitable termination 3Cx1.5sqmm FRLS PVC insulated cable.
4
69115
17278.8
Supply & erection of 7m long G.I octagonal pole complete with R.C.C foundation, required G.I base plate, single-arm of ERW galvanised pipe 30mm-1m length, providing G.I pipes for cable entry junction box with prewired 6 Amp SP MCB, loop-in - loop-out, terminal block, wiring with copper wire upto the fittings etc. complete as required.
4
31609
7902.4
Supplying & fixing of 90watt Street/Flood Light Similar to JAQUAR/Havells/WIPRO/Bajaj with all accessories.
8
24000
3000
Supply & fixing of Outdoor LED 1-2w Waterproof Solar Light (withstand upto 2000kg of weight) similar to JAQUAR/Havells/WIPRO/Bajaj/or equivalent
20
50000
2500
Earth work in all kind of soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.
32
7068
220.9
Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of 0.3 mtr, with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. All complete as per directions of the Engineer -in-charge.
6.98
3965
568.5
Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) of approved quality from quarry mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. but excluding the cost of centering and shuttering all complete as per the directions of Engineer-in-charge.
3.2
14592
4560
Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate 20 mm nominal size ) of approved quality from quarry mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. & including the cost of centering and shuttering all complete as per the directions of Engineer-in-charge.
1.88
9262
4926.8
Filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20 cm in depth , consolidating each deposited layers by ramming and watering, lead up to 50m and lift up to 1.5 mt etc. including cost of all labour, sundries T & P etc complete in all respect as per the direction of Engineer-In-Charge.
21.34
2112
99
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
46.08
199683
4333.4
RCC work M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 % ) to be mixed in concrete mixture with approved grade cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost of centering & shuttering as per direction of the Engineer in charge.
6.25
33922
5427.6
Providing, fixing in position TMT Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)
6.88
59043
8581.9
Providing steel centering and shuttering(steel/ ply) to required shape and size for all kinds of R.C.C. works centering materials with all necessary bracing, ties and supports with level centering covered with 50 micron polythene sheet/bituminous paper . as per the direction of the Engineer -in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete.
10
1035
103.5
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
12
52396
4366.4
Providing 16mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
124
25866
208.6
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
i) 9.5 mm to 4.75 mm @ 35 per cent ii) 4.75 mm to 2.36 mm @ 12.5 per cent iii) 2.36 mm below @ 52.5 per cent
64.28
110770
1723.3
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per Clause 404 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
42.85
98448
2297.4
Providing and laying 80mm thick M-30 grade factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
428.52
368572
860.11
Cast in Situ Cement Concrete M20 Kerb (Comstruction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 350 mm high in PCC M20 grade on PCC M10 grade foundation 100 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine or manually as per direction of site in charge with labour T & P etc all complete as per clause no 409 (Reffer MORT&H's & NH PWD Roads 2019)
96.7
37698
389.85
Wall painting two or more coats of cement paint of approved shade on new work over a coat of to give an even shade including cost of paint.
110.93
4536
40.9
Supplying & Fixing Granite tiles 20mm thick in floors/ platform trades or steps and landing on 25 mm thick bed of Cement motar 1:1 Jointed with neat cement slury moxed with pigment to match the shades of the tiles including rubbing and polishing including cost of all meterials etc. complete.
112
262707
2345.6
Providing, fitting & fixing M.S grill fabricated from 12mm and 16mm square bars as per approved drawing and design including cost, conveyance & taxes of all materials, fabrication charges, fixing in position to RCC columns / walls in cement concrete (1:2:4) and making good to the damages complete as per direction of the Engineer-in-charge. The rates shall be inclusive of all cost of Materials, labour, T&P Shuttering etc complete
720
61200
85
Painting synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats on new work over a coat of suitable shade with primer of approved brand as per manufacturer's specification including cost of all materials with taxes and transportation, all labour, scaffolding, sundries, T&P etc. All complete as per the direction of the Engineer -in-charge.
12
2356
196.34
Painting two coats with Water soluble weather coat paints of approved shade of approved make or equivalent over out side brick wall over a coat of primer, by means of brush to outside surface of new walls after scraping, cleaning the surface including all cost of materials, scaffolding, labour, watering & curing T&P etc complete as per direction of Engineer -in-charge.
643.31
83243
129.4
Providing and fixing of HI-STEEL Aluminum Sun Louvers 84R system comprises of 84 mm wide and 16 mm deep roll formed out of aluminum coils. In Aluminum, Panels are made of 0.5mm thick aluminum alloy 3105/3005 and Carriers are made of 0.9mm thick aluminum alloy with cut-outs to hold panels. Aluminum panel and carrier shall be polyester powder coated with 60-70 microns. HI-STEEL Sun louver system is a vertical or horizontal wall sun shading system. The system use 84 R panels that snap into vertically mounted frames. The frames can be mounted on the exterior of a building over window openings, along balconies or over open area on a building elevation. The vertical/horizontal frames are offered in two different designs that hold the panels at different angles of 35 and 45 degrees. The ranges of angles provide air flow, sun shading, safety from rainfall and desired visibility including cost of materials, cost of all labour, T & P etc. complete as per the direction of Engineer in charge.
52.5
223650
4260
Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of he materials for reuse and removing the debris within 50m lead
107.4
8259
76.9
Dismantling of Lime Concrete, cement concrete grade M-15 & M-20 including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres.
12.56
16287
1296.28
Dismantling Brick / Tile work in lime mortar including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres.
108.45
24366
224.69
Dismantling Wood Work wrought framed and fixed in frames of trusses upto a height of 5 m above plinth level including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000metres.
4.61
1720
372.72
Dismantling Steel Work in all types of sections upto a height of 5 m above plinth level including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable
material and stacking the serviceable material with all lifts and lead of 1000 metres excluding cutting of rivet but including dismembering.
1.13
1816
1606.51
Dismantling and removing lime concrete flooring 7.5cm to 10cm thick including stacking the useful materials for reuse and removing the debris within 50m lead.
107.4
12286
114.4
Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead.
150.36
49994
332.5
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
468.38
36018
76.9
First Floor
291.56
22537
77.3
Scarping Plaster in Lime or Cement Mortar from Brick/ Stone Masonry including T&P, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres.
2103.93
35973
17.1
First Floor
1386.87
24824
17.9
Dismantling & removing 2.5 cm thick grading concrete from roof slab cleaning the surface lowering & removing debris with in 50. m Lead. (per 1 Sqm.)
91.58
8718
95.2
First Floor
401.82
38413
95.6
Dismanteling & removing old tile flooring including removing the base course and stacking the useful materials for reuse and removing the debris with in 50. m Lead. (per 1 Sqm.)
580.01
60320
104
First Floor
262.27
32154
122.6
Supply & Delivery of topiary/trees/Palms/shrubs/lawn/ ground covers and specified plants as per directions of officer in charge at site including cost of plants and conveyance of all materials and labour charges etc., plants of bag size 7" x 8" of plant height not less than 1.0 feet,
8" x 10" of plant height not less than 3.0 feet,
13" x 13" of Tree/Palm height not less than 5 feet,
13" x 13" of plant (Hedges & Shrub) height not less than 2 feet,
15" x 16" of plant (Tree/Palm/Topiary) height not less than 5 feet, 18" x 18" plant (Tree/Palm/Topiary) height not less than 6 feet, bottom dia of the stem is 0.75'' and above, 21" x 21" and above plant (Tree/Palm/Topiary) height not less than 7 feet, bottom dia of the stem is 1'' and above.
Heights mentioned above are excluding bag height.
All the plants supplied shall be with sturdy stem, well formed crown, vigorously growing tip, healthy foliage without any infestation and the plants shall be supplied after proper hardening off. The rates inclusive of loading, transportation to the site, unloading & handling.
100
8000
80
allamanda cathartica 8" x 7"
100
8000
80
bougainvillea 9" x 10"
100
8000
80
nerium oleander 13" x 13"
100
12000
120
tecoma gaudichaudi 13" x 13"
100
12000
120
duranta erecta 9" x 10"
100
12000
120
ixora 9" x 10"
100
8000
80
acalypha inferna 9" x 10"
100
8000
80
hymenocallis littoralis 9" x 10"
100
8000
80
wedelia trilobata 4" x 6"
50
1000
20
pandanus gold 4" x 6"
50
1000
20
tradescantia spathacea 4" x 6"
50
1000
20
syngonium trilobata 4" x 6"
50
1000
20
ipomoea 4" x 6"
50
1000
20
DEVELOPMENT OF LAWN-Clearance of site, excavation of around upto a depth of 30cm, removal of excavated materials to outside for dumping at suitable places all complete as per specification and direction of Engineer In Charge.
250
7000
28
Filling the site with good garden soil/silt to a depth of 30cm including carriage and leveling the area, all complete as per specification and direction of Engineer In Charge.
250
7500
30
Spreading of FYM @0.08cum, chemical fertilizer NPK @ 250gms, termicide 50gms including cost of materials of carriage, all complete as per specification and direction of Engineer In Charge.
250
4500
18
Final leveling after thorough mixing of all materials and compacting by hand roller inclusive of labour, materials, transportstion, T&P etc. all complete as per specification and direction of Engineer In Charge.
250
1125
4.5
Rolling and watering inclusive of labour, materials, transportstion, T&P etc. all complete as per specification and direction of Engineer In Charge.
250
1125
4.5
Providing & laying Broad leaf Poa: Development of Grass - Supplying and laying of broad lead poa of well developed weed free grass Selection 1 soil working micro leveling , shaping , spreading FYM , applying fertilizer, pesticides including cost of material ,shaping area with munt feature etc. as per instruction of Officer incharge , and planting with broad lead poa grass regular weeding , hoeing ,watering till thick turf developes and maintance upto 3 months including cost of men , material all complete .
100
21500
215
Providing & laying Mexican grass: Development of Grass - Supplying and laying of maxican grass of well developed weed free grass Selection 1 soil working micro leveling , shaping , spreading FYM , applying fertilizer, pesticides including cost of material ,shaping area with munt feature etc. as per instruction of Officer incharge , and planting with maxican grass regular weeding , hoeing ,watering till thick turf developes and maintance upto 3 months including cost of men , material all complete .
200
53000
265
TENDING-Weeding, soil working upto 50cm radius around the plant, in August, September and application of chemical fertilizers inclusive of labour, materials, transportstion, T&P etc. all complete as per specification and direction of Engineer In Charge.
500
2250
4.5
Weeding, soil working upto 50cm radius around the plant and mulching in October &November inclusive of labour, materials, transportstion, T&P etc. all complete as per specification and direction of Engineer In Charge.
500
2250
4.5
First mowing after three months and there after every two months inclusive of labour, materials, transportstion, T&P etc. all complete as per specification and direction of Engineer In Charge.
500
4000
8
Weeding through out the year inclusive of labour, materials, transportstion, T&P etc. all complete as per specification and direction of Engineer In Charge.
500
4000
8
Top dressing with soil, FYM, chemical fertilizer twice a year after mowing, in june and November including artifungal treatment.
500
1000
2
Maintenance of Tree planting: Trimming (once in month), watering (once in three days @ 5 Lts/per plant shall be provide to maintain sub soil moisture continuously), formation of basins 0.30m . away from the edges (once in a month) and application of fertilizers, insecticides, Fungicides @ 20 gms/pit/sqmt) (once in quarterly) by manually, but excluding cost of water & fertilizers for month for one year
1150
20700
18
Watering for about 8-9 months excluding rainy days, inclusive of watering arrangements, labours, T&P etc. all complete as per specification and instruction of Engineer in Charge
500
5000
10
FRP fountain i.e. Fiber Reinforced Plastic Fountains 6' high, 6'-6" water body, with 1.2 HP pump & 2nos of nozzle including all plumbing & electrical fiitings as per manufacturer's specification/drawing including cost of all materials with taxes and transportation, all labour, sundries, T&P etc. All complete as per the direction of the Engineer -in-charge.
2
600000
300000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements