The Odisha Small Industries Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_OSIC_84537_4Bid Award Id
ViewTender No
OSIC/Constn./2022-2023/16Tender Authority
The Odisha Small Industries Corporation Limited ViewPurchaser Address
-Website
http://http://www.osicltd.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth work in all kind of soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.
253.68
-
216.3
Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general.
29.11
-
18.6
Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of 0.3 mtr, with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. All complete as per directions of the Engineer -in-charge.
266.36
-
372
Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) of approved quality from quarry mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. but excluding the cost of centering and shuttering all complete as per the directions of Engineer-in-charge.
22.11
-
4300.3
Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate 20 mm nominal size ) of approved quality from quarry mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. & including the cost of centering and shuttering all complete as per the directions of Engineer-in-charge.
53.28
-
4667.1
Providing anti-termite treatment using approved quality of chemical emulsion, spraying the mixture uniformly by sprayer as preconstructional anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, top surface
of plinth filling, junction of walls & floors along with external perimeter of the building, expansion joints, surrounding the pipes
and conduits etc. complete at the rate as directed by the manufacturer confirming to IS:6313 (Part-II) and as per direction of
Engineer-in-charge including cost of all materials, labour, taxes, sundries, T&P etc. complete. (The payments shall be made on the basis of actual plinth area of the building at Ground Floor & vertical faces will not be measured for payment.) Note:- The Contractor shall have to furnish 10years Guarantee to maintain the anti-termite treated area / structures free from termite.
532.72
-
100
Filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20 cm in depth , consolidating each deposited layers by ramming and watering, lead up to 50m and lift up to 1.5 mt etc. including cost of all labour, sundries T & P etc complete in all respect as per the direction of Engineer-In-Charge.
169.12
-
96.93
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
44.13
-
4243.2
RCC work M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 % ) to be mixed in concrete mixture with approved grade cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost of centering & shuttering as per direction of the Engineer in charge.
149.14
-
5203.1
Ground Floor
156.16
-
5203.1
First Floor
153.67
-
5289.7
Second Floor
153.67
-
5389.3
Terrace Floor
19.03
-
5503.9
Providing, fixing in position TMT Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)
239.66
-
8572.6
Ground Floor
203.01
-
8572.6
First Floor
199.78
-
8596.9
Second Floor
199.78
-
8622.5
Terrace Floor
24.74
-
8649.4
Providing steel centering and shuttering(steel/ ply) to required shape and size for all kinds of R.C.C. works centering materials with all necessary bracing, ties and supports with level centering covered with 50 micron polythene sheet/bituminous paper . as per the direction of the Engineer -in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete.
244.2
-
102.7
Plinth Beam
272.08
-
102.7
Foundation and plinth
48.3
-
749.1
Column
255.59
-
749.1
Roof Beam
408.12
-
749.1
Roof Slab
530.51
-
435.8
Staircase
65.29
-
611.6
Lintel
153.06
-
266.8
Column
223.84
-
898.9
Roof Beam
213.75
-
898.9
Roof Slab
523.88
-
523
Staircase
65.29
-
733.9
Lintel
209.61
-
320.2
Column
262.89
-
1078.7
Roof Beam
209.68
-
1078.7
Roof Slab
556.48
-
627.5
Staircase
65.29
-
880.7
Lintel
209.61
-
384.2
Column
53.34
-
1294.5
Roof Beam
59.36
-
1294.5
Roof Slab
68.51
-
753
Lintel
0.78
-
461
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
104.6
-
4276.2
First Floor
112.21
-
4549.4
Second Floor
107.7
-
4906.4
Terrace Floor
66.23
-
5267.8
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:4). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
51.66
-
4368.44
First Floor
51.19
-
4570
Second Floor
51.19
-
4845.5
Supplying, fitting and fixing in position well seasoned & dressed Sal wood choukhats in doors free from defects such as dead knots, flows etc. in all floors including two coats of termite proof wood preservatives to Rear surface of frames which is in contact with concrete and masonry surface fitted with 6 nos. of W.I. Clamps and required screws of approved quality including cutting legs to sizes, cutting holes in walls, fixing in CC 1:2:4 including cost, conveyance, royalties and taxes of all materials and cost of all labour, sundries, T & P etc. required for the workall complete as per the directions of Engineer -in-charge.
1.28
-
48817.3
First Floor
1.33
-
48817.3
Second Floor
1.33
-
48817.3
Providing 16mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
545.96
-
201.8
First Floor
463.53
-
206.8
Second Floor
463.53
-
212
Terrace Floor
457.45
-
217.4
Providing 12mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
1493.78
-
141.1
First Floor
1489.23
-
144.4
Second Floor
1489.23
-
147.9
Terrace Floor
127.6
-
151.5
Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge
475.46
-
158.4
First Floor
477.33
-
162.1
Second Floor
477.33
-
166
Terrace Floor
49.3
-
169.9
Providing average 25mm thick grading Concrete with (1:2:2) using 6mm black hard granite chips using 2% water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface, plastering and finishing smooth to proper slope and gradient including cost of all materials, conveyance and sundries, T&P etc. complete as per direction of the Engineer -in-charge.
502.6
-
299.6
Providing and laying water proofing treatment in sunken portion of WCs,
bathroom etc., by applying cement slurry mixed with water proofing cement
compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing
cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing
cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
40.4
-
327.41
Second Floor
40.4
-
327.41
Third Floor
40.4
-
327.41
Supplying, Fitting, Fixing Vetrified Tile (600 x 600) of approved make confirming to IS 13755 in floors treads or steps and landing laid on 25mm thickbed of cement mortar1:4(1cement : 4sand) filling joints with white cement of approved quality including cost of all materials labour T & P etc required for the work all complete as per direction of Engineer in Charge.
402.8
-
1322.1
First Floor
402.8
-
1332.1
Second Floor
402.8
-
1342.7
Supplying, Fixing Double charged Vetrified Tiles (600 x 600)in Dados Skirting & Risers of Steps of 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost of all materials labour T & P etc required for the work all complete as per direction of Engineer in Charge.
73.08
-
1374.1
First Floor
73.08
-
1389.2
Second Floor
73.08
-
1404.4
Providing & Fixing Kota tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete.
7.4
-
1070
Providing & Fixing Kota tiles in dados skirting and risers of step on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete.
1.65
-
1173.2
Supplying & Fixing Granite tiles 20mm thick in floors/ platform trades or steps and landing on 25 mm thick bed of Cement motar 1:1 Jointed with neat cement slury moxed with pigment to match the shades of the tiles including rubbing and polishing including cost of all meterials etc. complete.
26.3
-
2194.3
First Floor
26.3
-
2203.1
Second Floor
26.3
-
2212
Providing & Fixing Floor tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete.
40.4
-
713.1
First Floor
40.4
-
721.9
Second Floor
40.4
-
730.7
Providing & Fixing Glazed Tiles in Dados Skirting &Risers of Steps of 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete.
139.86
-
760.1
First Floor
139.86
-
773.3
Second Floor
139.86
-
786.7
Supplying fitting and fixing in position 32mm thick single leaf Grade-1 flush door confirming to IS:2202 (part 01/1991) with select seasoned timber and block board core framed with seasoned hard wood battens and bonded at high pressure with phonol formaldehyde resin under the cross banding process, termite resistant and moisture proof, including cost, conveyance, taxes of all materials with 1mm thick laminate of approved make on both side,1no of Aldrop, 3 nos of SS butt hinges, 2 nos of tower bolt, PVC door stopper, Buffer & SS handle as per the lay-out drawing and specification given by the Architect, Including all cost of labour, material, conveyance, loading, unloading, T&P and painting the wooden surface with an approved shade and finish etc all complete as per directions of Engineer-in-charge.
46.32
-
4710.73
First Floor
46.41
-
4710.73
Second Floor
46.41
-
4710.73
Supplying, fitting, fixing up window (sliding type) made up aluminum Section 151-154, 151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick glass as panel fitted with rubber bending including lucking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.
56.7
-
5635.6
First Floor
48.6
-
5635.6
Second Floor
48.6
-
5635.6
Terrace Floor
5.4
-
5635.6
Providing and fixing of Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 5 mm reflective with all taxes complete.
2.88
-
3674.49
First Floor
2.88
-
3674.49
Second Floor
2.88
-
3674.49
Providing fitting, fixing of Al. door with Al. door section No. 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete.
5.04
-
6409
Providing, fitting & fixing M.S grill fabricated from 12mm and 16mm square bars as per approved drawing and design including cost, conveyance & taxes of all materials, fabrication charges, fixing in position to RCC columns / walls in cement concrete (1:2:4) and making good to the damages complete as per direction of the Engineer-in-charge. The rates shall be inclusive of all cost of Materials, labour, T&P Shuttering etc complete
1134
-
85
First Floor
972
-
85
Second Floor
972
-
85
Terrace Floor
108
-
85
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
39.6
-
577.13
First Floor
39.6
-
577.13
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin,moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856,complete as per direction of Engineer-in-charge.
12.6
-
3340.25
First Floor
12.6
-
3340.25
Second Floor
12.6
-
3340.25
Supplying ,Fitting and fixing of stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, pollishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
12
-
3711
First Floor
12
-
3711
Second Floor
12
-
3711
Painting synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats on new work over a coat of suitable shade with primer of approved brand as per manufacturer's specification including cost of all materials with taxes and transportation, all labour, scaffolding, sundries, T&P etc. All complete as per the direction of the Engineer -in-charge.
56.7
-
193.43
First Floor
48.6
-
200.4
Second Floor
48.6
-
207.5
Terrace Floor
5.4
-
214.6
Painting two coats with Water soluble weather coat paints of approved shade of approved make or equivalent over out side brick wall over a coat of primer, by means of brush to outside surface of new walls after scraping, cleaning the surface including all cost of materials, scaffolding, labour, watering & curing T&P etc complete as per direction of Engineer -in-charge.
545.96
-
128.2
First Floor
463.53
-
132.3
Second Floor
463.53
-
136.4
Terrace Floor
457.45
-
140.7
Distempering two coats to walls with two coats of putty and one coat of primer on the plastered surface by means of rollers to give an even shade including cost of all materials, labour, conveyance, taxes, royalties, scaffolding, sundries, T&P etc, All complete as per the direction of the Engineer-in-charge
1969.24
-
202.3
First Floor
1966.56
-
206
Second Floor
1966.56
-
209.7
Terrace Floor
176.9
-
213.6
Making plinth protection 50mm thick cement concrete 1:3:6 over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
132.3
-
350.44
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
i) 9.5 mm to 4.75 mm @ 35 per cent ii) 4.75 mm to 2.36 mm @ 12.5 per cent iii) 2.36 mm below @ 52.5 per cent
13.93
-
1546
Providing and laying 80mm thick M-30 grade factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
92.83
-
784.78
Cast in Situ Cement Concrete M20 Kerb (Comstruction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 350 mm high in PCC M20 grade on PCC M10 grade foundation 100 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine or manually as per direction of site in charge with labour T & P etc all complete as per clause no 409 (Reffer MORT&H's & NH PWD Roads 2019)
34.7
-
370.64
Wall painting two or more coats of cement paint of approved shade on new work over a coat of to give an even shade including cost of paint.
15.62
-
40.4
Earth work excavation in ordinary soil within 50 m, initial lead and1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm laying in layers not exceeding 0.3m in depth and earth trasported by transport vehicles as per the direction of the Engineer-in-charge.
35.04
-
216.3
Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) of approved quality from quarry mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. but excluding the cost of centering and shuttering all complete as per the directions of Engineer-in-charge.
5.84
-
4300.3
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
21.9
-
4243.2
RCC work M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 20 N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 % ) to be mixed in concrete mixture with approved grade cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost of centering & shuttering as per direction of the Engineer in charge.
21.57
-
4842.7
Providing, fixing in position TMT Fe-500/ 500D (IS-1786-1985) reinforcement bars for RCC work of required diameter of approved SAIL/ TATA / RINL (VIZAG)/ JINDAL make including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)
16.18
-
8572.6
Providing strong, rigid, leveled and plumbed centering and ply shuttering to required shape and size for all kinds of R.C.C. works in the items mentioned below with wooden centering materials with all necessary bracing, ties and supports with level centering covered with bituminous paper including provision of necessary holes and pockets, fan hooks or boxes, switch and board insert plates, clamps and extension bars etc. as per the direction of the Engineer-in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete.
41.6
-
102.7
Slab
69.35
-
435.8
Providing 12mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
109.5
-
141.1
Providing cement punning to walls including roughening, scraping and cleaning and finishing the surface smooth only to proper plumbs and level, to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge
109.5
-
32.5
Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. as per specification and direction of Engineer in-charge.
Make:SUPREME/ASHIRVAD/ASTRAL
150.5
-
121.6
25mm dia(Oriplast/Supreme/Astral)
132.1
-
153.3
32mm dia(Oriplast/Supreme/Astral)
45.5
-
199.2
40mm dia(Oriplast/Supreme/Astral)
20.5
-
220.1
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR-11)conforming to IS 15778, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer- in-Charge
20.5
-
542.9
32mm dia
32.2
-
411.5
25mm dia
80.5
-
288.5
20mm dia
65.5
-
205.2
15mm dia
5
-
158.9
Providing and fixing to wall or ceiling and floor UPVC- ASTM Standard (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete.
10
-
442.8
40mm dia
10
-
335.5
32mm dia
10
-
275.5
25mm dia
10
-
206.3
20mm dia
10
-
158.3
Supplying, fixing and testing Ball Valve UPVCSch-80 (Solvent welded with Metal ball) all material, labour, T&P & fitting, and fixing the following different water supply fittings including supply of all necessary jointing materials etc. all complete as directed by the Engineer -in - charge.
5
-
2601.57
40mm dia
5
-
1653.87
25mm dia
20
-
629.85
32mm dia
20
-
1296.17
20mm dia
10
-
479.15
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per specification & direction of the Engineer-in-charge.
88
-
53.3
Cutting hole in R.C.C floors and roofs upto 19 cm thick for passing G.I / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof complete as per the direction of the Engineer-in-charge.
44
-
182.7
Providing all materials labour, T&P for Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification & as per specification & direction of EIC.
250.5
-
185.6
Providing all materials, labour,T&P ,fittings and fixing of different water supply (CP on Brass) fitting (Quarter Turn or as specified) as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in-charge.
80
-
533.4
Fixing 15mm dia pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of the following nominal bore as per specification
20
-
694.3
15mm dia CP Brass long body Bib Cock
20
-
756.2
15mm dia CP flange
5
-
76.9
15mm dia CP Brass Short Body Bib Cock
10
-
699.4
15 mm CP 2 in 1 Bib cock .
10
-
1000.2
Wall Mixture Non Telephonic Type
20
-
2200.9
Providing all materials, labour, T&P forFixing of Brass Ball Valve (Horizontal plunger type) conforming to IS 1703-1977 as per specification all complete as per specification and direction of Engineer-in-charge..
10
-
690.4
32mm dia Brass ball valve
10
-
1213.2
40mm dia Brass ball valve
10
-
1476.5
15mm dia PVC connecion pipe 450mm long
10
-
84.1
15mmx25mm C.P. Extension piece
10
-
129.6
Providing and fixing circular type stainless steel jalli (grating) with hole for floor/nahani trap etc. complete as per specification and direction of the EIC.
45
-
73.2
Overhead shower Round shape Multi Flow (ABS Body) chrome plated with Gray Face Plate)with Rubit Cleaning System & Shower Arm casted 190 mm long Flat shape for wall mounted Showers with Flange.
20
-
539.9
Concealed Brass CP stop cock regular body suitable for 20mm pipeline with spindle extension & plastic protection cap & Exposed Part Kit of Concealed Stop cock & Flush cock with fitting sleeve,operating Lever & adjustable Wall flange with seal.
20
-
865
Supplying all materials,labour, T&P and fixing CP Health Foucet with 1.0 mtr PVC Tube
25
-
816.7
Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge
6
-
19883.9
1500 litre capacity water storage tanks
2
-
15528.2
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
50
-
296.8
UPVC single equal Tee (with door) 110x110x110 mm (Oriplast/Supreme/Astral)
50
-
276.7
110mm dia u-pvc offset (Oriplast/Supreme/Astral)
20
-
331.6
110mm dia u-pvc door bend (Oriplast/Supreme/Astral)
20
-
198
110mm dia u-pvc plain shoe bend (Oriplast/Supreme/Astral)
20
-
280.4
110mm dia u-pvc vent cowl (Oriplast/Supreme/Astral)
20
-
50.7
110mm dia u-pvc p-Trap (Oriplast/Supreme/Astral)
20
-
306.8
110mm dia u-pvc s-Trap (Oriplast/Supreme/Astral)
20
-
426.1
110mm dia u-pvc plain bend (Oriplast/Supreme/Astral)
6
-
198
Providing and fixing 40 mm dia waste Coupling (F/T) complete as per as per direction of Engineer-in-charge.
6
-
111.48
Providing and fixing Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40 mm, bottle trap, including painting of fittings and brackets, cutting and making good the walls wherever required complete as per as per direction of Engineer-in-charge.
4
-
4900
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete as per as per direction of Engineer-in-charge. Make:HINDWARE/PARRYWARE/CERA WITH ISI MARK
25
-
1700.4
Fixing Wash Down Water Closet (European type W.C pan) with seat cover & integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification.
Make:HINDWARE/PARRYWARE/CERA.
20
-
3536.9
Providing all materials, labour, T&P for fitting and fixing 580 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan of approved make in all floor including supply of sutaible bracket, PVC wall plug and Brass screws etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in- charge.
Make:HINDWARE/PARRYWARE/CERA.
5
-
2774.4
Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including bottle trap, cutting holes in walls and making good the damages etc all complete as per specification & as per direction of EIC. (Make:HINDWARE/PARRYWARE/CERA)
27
-
1868.6
Fixing glazed earthenware squatting plate of size 600mmx350mm conforming to IS 2556 : Part 6-1995 with intigral longitudinal flushing pipe including embeding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard grabnite metal etc all complete as per specification. (Make:HINDWARE/PARRYWARE/CERA)
10
-
2526.8
15mm dia CP urinal spreader
10
-
673.5
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth as per the direction of Engineer-in- charge.
10
-
2570.7
Providing all materials, labour, T&P for fixing of following sizes of Prime mirror (60x45 cm)of 6mm thick mounted on 6mm thick AC back sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C.(Alpina/Golden Fish/Belgion)
27
-
717.2
Supplying and fixing 20mmx600mm long CP towel rail
20
-
829.1
Supplying and fixing standard size C.P. Soap Dish holder.
20
-
90
Supplying and fixing standard size 32 mm CP Double Coat Robe Hook.
20
-
1107.7
Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-B) for rain water of approved make confirming to IS-13592/1992.with ISI Mark in all floor.
45.5
-
296.8
Supplying all materials, labour and T&P for fixing S.W. gully trap Grade-A complete with cast iron grating,brick masonry chamber (250x250mm.) with R.C.C. cover slab as per P.H. specification and design all complete. [ excluding cost of gully trap and grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
10
-
1442.56
Supplying all materials labour & T&P for constructing of brick masonry gully trap chambers earth work in excavation in all kinds of soil, 250mm thick K.B. brick work in C.M. (1:5) with K.B. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punning including cost of RCPC cover slab etc. all complete as per approved P.H.E.D. specification and direction of Engineer-in-charge. (300mm x 300mm x 300mm deep)
4
-
3093
Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design etc all complete as per approved specification and direction of the Engineer in charge
4
-
7273.78
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
10
-
189.1
110mm dia u-pvc pipe alround concrete
10
-
378.7
125mm dia u-pvc pipe alround concrete
10
-
449
160mm dia u-pvc pipe alround concrete
4
-
732.3
Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.
4
-
12976.6
Inside size 1200mm x 1200mm x 1100mm
2
-
18386.9
Supplying all materials,labour,T&P and constructing soakway pit of the following size with precast RCC rings joined loose,gravel backing in the rear of well steining,precast Rcc cover slab in cement concrete (1:2:4) using 12mm size stone aggregates fitted with iron lifting handles including cutting holes in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works,watering,curing,conveyance of all materials to worksite etc. complete as per specification and direction of the EIC.
4
-
13551.2
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH PVC insulated copper conductor of ISI marked Make- RR KABEL/POLYCAB/HAVELLS with 20 mm dia PVC flexible non metallic conduit Make-AKG/KINJAL/POLYCAB with 6A modular type switch ISI marked Make-Make- Schneider(Clipsal X)/legrand( Arteor) /Havells (Crabtree) /Panasonic (Vision), and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with cover Make-Make- Schneider(Clipsal X)/legrand( Arteor) /Havells (Crabtree) /Panasonic (Vision), of suitable size, modular box with 1.5 sq. Mm FR PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital.
40
-
597.3
MEDIUM POINT (GROUP-B)
80
-
732.6
LONG POINT (GROUP-C)
60
-
916.3
Group control of point in Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH PVC insulated copper conductor of ISI marked Make- RR KABEL/POLYCAB/HAVELLS with 20 mm dia PVC flexible non metallic conduit Make-AKG/KINJAL/POLYCAB with 6A modular type switch ISI marked Make-Make- Schneider(Clipsal X)/legrand( Arteor) /Panasonic (Vision),and ceiling rose ISI marked Make- Make-Schneider(Clipsal X)/legrand( Arteor) /Panasonic (Vision), of modular type G.I box with cover Make-Make-Schneider(Clipsal X)/legrand( Arteor) /Panasonic (Vision), of suitable size, modular box with 1.5 sq. Mm FR PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit)
10
-
1076.9
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Make-Schneider(Clipsal X)/legrand( Arteor) /Panasonic (Vision),
70
-
594
Supplying,fixing of 1x16A+1X 6A Plug on the separate board with complete fitting by 02 no of 16A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make- Schneider(Clipsal X)/legrand( Arteor) /Panasonic (Vision),(For equipement power)
10
-
1045
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make- Schneider(Clipsal X)/legrand( Arteor) /Panasonic (Vision),(For equipement power)
10
-
917.4
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to PDB/LIGHT CKT)(2X1.5+1X1.5)
250.5
-
148.5
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)
458.3
-
167.2
Supplying & laying of 3.5CX50mm PVC insulated armoured and PVC sheathed AL. power cable of 1.1 KV grade of 50 Sqm.mm POLYCAB/HAVELLS/KEI of following size cables in ground including excavation,sand cushioning protective covering and refilling the trench and as per direction of Engg.-in-Charge.
200
-
566.5
Supplying & laying of one number PVC insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade of 25 Sqm.mm POLYCAB/HAVELLS/KEI of following size cables in ground including excavation,sand cushioning protective covering and refilling the trench and as per direction of Engg.-in-Charge.
110.8
-
414.7
Supplying & laying of (2X4mm Square+1X1.5mm Square) submain for floor mounted panel to BDB
POLYCAB/HAVELLS/KEI on surface as per direction of Engg.-in-Charge.
150
-
361.9
Supplying & laying of one number PVC insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade of 3 core 6 Sqm.mm POLYCAB/HAVELLS/KEI of following size cables in ground including excavation,sand cushioning protective covering and refilling the trench and as per direction of Engg.-in-Charge.
160
-
304.7
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable. Of 1.1 KV as per direction of Engg.-in-Charge.
8
-
990
3.5 core x25 sq mm
8
-
715
3.5 core x16 sq mm
8
-
605
Providing,fixing and laying of fallowing dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
65.3
-
447.7
80 mm dia
87.9
-
518.1
Supply, fixing, commionssioning & testing of main LT control panel floor mounted made out of 2mm thick CRCA sheet duly painted & powder coated with all associries as per GA drawing. Instrument arrangement- 3nos RYB indicating lamp with selecter switch, volt meter, Amper meter with AL. bus bar as well as cable allloy, separate earth terminal bus bar as well as 75mm base channel as per direction of Eingineer in Charge.
Incoming-250AMP 3 Pole MCCB. .(make-ABB/Siemens/SCHNEIDER/L&T ISI marked).
Outgoing- i) 63AMP 4Pole MCCB-2nos
ii) 40AMP DP MCB-4nos
Instrument arrangement- 3nos RYB indicating lamp with selecter switch, volt meter, Amper meter with AL. bus bar as well as cable allloy, separate earth terminal bus bar as well as 75mm base channel as per direction of Eingineer in Charge.
1
-
66000
Supply, testing & commissioning of 8way BDB Make- Legrand/L&T/SIMENS
incoming-40AMP DP MCB-1no
outgoing- 25AMP SP MCB-6nos
6
-
7700
Supply & fixing of earth elector having 40mm dia with 12nos hole as well as Franch with charcole & salt as per requirement having 10' excavated earth with brick chamber & CI cover
10
-
6155.6
Providing and fixing 25mm x 3 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
85
-
627
Providing and fixing 25mm x 5 mm copper strip ISI marked at 0.5Mtr below G.L as strip earth electrode. as required as per direction of Engg.-in-Charge.
65.5
-
602.8
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.- in-Charge.
50.5
-
102.3
Optimised pulse rod early streamer emission as per French standard BSEN 50164/2 accessories and NFC 17102 stainless steel air terminal with mounting accessories of MAKE ABB OR ERICO as per imported manufacture testing laboratory certification including all earthing and instalation.
1
-
150000
supplying, erection, testing, inspection & fitting of 1.5tonne 5star AC with all necessary accessories as per the direction of Engineer-in-charge.
Make:-BLUE STAR/VOLTAS/CARRIER/LLOYD
1
-
45000
Supplying, erection, testing, inspection & fitting of 1.0tonne 5star AC with all necessary accessories as per the direction of Engineer-in-charge.
Make:-BLUE STAR/VOLTAS/CARRIER/LLOYD
1
-
35000
Supplying & fixing of 36watt Surface Light Similar to JAQUAR/Havells/WIPRO/Bajaj with all accessories.
Size: (600X600)mm
4
-
2255
Supplying & fixing of 20watt Surface Light Similar to JAQUAR/Havells/WIPRO/Bajaj with all accessories.
Size: 234mm dia
4
-
1650
Supply and fixing of step type electronic fan regulator on existing modular plate switch box including connection but excluding modular plate etc as required Similar to JAQUAR/Havells/WIPRO/Bajaj with all accessories..
50
-
385
Supplying and fixing of 1200 mm sweep ceiling fan with 300/600 mm standard down rod and electrical connection as required etc Similar to JAQUAR/Havells/WIPRO/Bajaj with all accessories..
50
-
2200
Supply, Installation, Testing & Commissioning of 40 watt FTL patti fitting Similar to JAQUAR/Havells/WIPRO/Bajaj with all accessories.
110
-
715
Supply, Installation, Testing & Commissioning of 8 watt LED Bulb Similar to Philips/WIPRO/Bajaj with all accessories..
50
-
110
Supply, of 300 mm dia, 1320/1350 RPM, 72watt input power exhaust fan complete with mounting ring frame brackets, louvers shutters without regulator including connection from outlet with 3 core flexible cable as required Similar to Crompton/Havells/V-Guard/Bajaj/Usha with all accessories..
40
-
2200
Supplying & fixing of Gate Light Similar to JAQUAR/Havells/WIPRO/Bajaj with all accessories.
2
-
7700
Supply , fixing & termination of Outdoor Street Light LED Luminaire with 72w LED Lamp similar to JAQUAR/Havells/WIPRO/Baja with suitable termination 3Cx1.5sqmm FRLS PVC insulated cable.
8
-
17278.8
Supply & erection of 7m long G.I octagonal pole complete with R.C.C foundation, required G.I base plate, single-arm of ERW galvanised pipe 30mm-1m length, providing G.I pipes for cable entry junction box with prewired 6 Amp SP MCB, loop-in - loop-out, terminal block, wiring with copper wire upto the fittings etc. complete as required.
8
-
7902.4
Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE certified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1 Mtr discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used un-used indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years warrantyIncluding transportation, all taxes and all labour charges etc complete.
6
-
9500
Providing ,fixing , testing and commissioning of Portable AFFF Foam Type fire extinguisher 9 Lt Capacity, Stored Pressure Type with Pressure Gauge, hose and brackets etc .The discharge Range shall be minimum of 6 mtrs.The Internal Coating of Can shall be Epoxy Powder coating and External painted with Epoxy Polyester Powder coating .The thickness shall not less than 2mm made of Sheet metal.The Fire Extinguishers shall be ISI Approved as per IS 15683:2006.Vendor shall consider the suitable signages along with the extinguishers.
3
-
7500
Ground Floor
50
-
75.3
Dismantling of Lime Concrete, cement concrete grade M-15 & M-20 including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres.
88.44
-
1270.91
Dismantling Brick / Tile work in lime mortar including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres.
107.74
-
221.31
Dismantling Wood Work wrought framed and fixed in frames of trusses upto a height of 5 m above plinth level including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000metres.
0.47
-
367.1
Dismantling Steel Work in all types of sections upto a height of 5 m above plinth level including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable
material and stacking the serviceable material with all lifts and lead of 1000 metres excluding cutting of rivet but including dismembering.
6.63
-
1576.18
Dismantling and removing lime concrete flooring 7.5cm to 10cm thick including stacking the useful materials for reuse and removing the debris within 50m lead.
715.26
-
112
Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead.
42.66
-
325.9
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements