The Odisha Small Industries Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_OSIC_81166_1Bid Award Id
ViewTender No
OSIC/Constn./2022-2023/13Tender Authority
The Odisha Small Industries Corporation Limited ViewPurchaser Address
-Website
http://http://www.osicltd.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment). Ground Floor
507.1
-
107.33
300mm dia 7 mtr long Single Under reamed pile foundation with RCC M25 using 12 mm size black granite stone chips including cost of boring but excluding the cost of reinforcement and labour charges for cutting, bending and binding of steel.
75
-
7506.18
Providing and laying plain cement concrete 1:3:6 (1 cement:34 sand:6 stone agregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring ,shuttering etc.complete all depth and height. Ground Floor
51.5
-
4601.2
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. Ground Floor
89.22
-
4036.2
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super structure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. Ground Floor
151.45
-
4069.2
First Floor
91.66
-
4297.26
Second Floor
13.16
-
4559.5
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:4) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super Structure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge.Ground Floor
1.73
-
4285.5
First Floor
2
-
4513.56
Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 Grade having a crushing strength of in 15cm cubes at 28 days after mixing adn tests conducted in accordance with IS 456 and IS 516 in footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies,Column, Beam Parapets, Window sills, Lofts, Railings etc. with 12mm to 20mm size black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumb and finishing the exposed surfaces smooth including cost of scaffolding, watering and curing for the required period including cost of all materials with taxes, royalties transportation, loading and unloading, all labour, sundries, T&P including hire & running charges of concrete mixer and vibrator etc complete as per the direction of the Engineer-in-charge but excluding the cost of materials and labour for reinforcement bars , centering and shuttering for the work. Ground Floor
262.3
-
4846.5
First Floor
50.15
-
4918.63
Second Floor
8.42
-
5001.58
Providing strong, rigid, leveled and plumbed centering and shuttering to required shape and size for all kinds of R.C.C. works in the items mentioned below with wooden centering materials with all necessary bracing, ties and supports with level centering covered with bituminous paper including provision of necessary holes and pockets, fan hooks or boxes, switch and board insert plates, clamps and extension bars etc. as per the direction of the Engineer-in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete.
447.5
-
110.1
Ground Floor
381.79
-
722.2
First Floor
191.34
-
866.6
Second floor
35.8
-
1039.9
Ground Floor
54.94
-
261.9
First Floor
64.62
-
314.3
Second floor
26.16
-
377.1
Ground Floor
666.31
-
419.7
First Floor
220.06
-
503.6
Second floor
29.73
-
604.3
Ground Floor
65.98
-
592.5
First Floor
65.98
-
711
Cutting, straightening coiled or bent up FE-500 M.S. Rod or tor steel make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge. Ground Floor
285.18
-
7907
First Floor
66.31
-
7927.4
Second floor
11.37
-
7948.8
Providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonary walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. Ground Floor
605.22
-
136.8
First Floor
337.7
-
141.5
Second floor
153.38
-
146.5
Providing 16 mm thick Cement Plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonary walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. Ground Floor
1001.23
-
195.3
First Floor
409.46
-
197.5
Second floor
43.37
-
199.9
6 mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:4 (1 cement : 4fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. Ground Floor
558.59
-
153.6
First Floor
198.02
-
156.9
Second floor
26.61
-
160.3
Supplying, fitting and fixing all purpose water resistant, termite resistant, fire resistant FRP (GRP) door shutter of 28 mm thickness with a tolerance of 2 mm of approved colour made out of unsaturated fire resistanct grade polyster resin, reinforced with glass fibre moulded to a monolithical core, with a laminate of 1.5 mm ofapproved design. The core is embedded in all side with 25 mm×50 mm water resistant grade block board / season sal wood for facilitating for fixing and fixtures. The hollow core filled up with EPS foam of 18kg/Cum and fixed properly with synthetic adhesive as per BIS 14856:2000. Extra block bopard support toprovide for mortise/ latch lock etc as per approved specification. Fixture - 3 no.s of 4" stainless steel hinges, 2 no.s of SS tower bolt, locking system, stopper etc. Screw should be of full thread csk screw of 25/8 and 19/6 size and supplying, fitting and fixing Door frame all purpose water resistant, termite resistant, fire resistant FRP (GRP) (DRWAJA Brand) pultruded section of size 50mm×50mm×4.5mm angle section of approved colour to be fixed to the wall / column with 6 no.s of plastic sleev and 2" SS screw and mending good to all damages including filling the gap between frame and wall with appropriate sealant including cost of all materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, etc complete as direction of Engineer-in-charge. 1st Floor
4.73
-
3535.4
Providing, fixing, fitting of fully glazed door made out of Black powder coated aluminium frame using door section of 19501 of Jindal make with top, bottom and vertical member, Glazing clip no19352 and jointing angles and 10mm thk toughened clear glass with itching as per drawing/design with all necessary hardware including long S.S handle to both side, including all cost of labour, T&P, hire charges of drilling mechine, labour charges etc. complete as per direction of Engineer-In-Charge. Ground Floor
31.19
-
7453.2
First Floor
8.82
-
7453.2
Second floor
2.21
-
7453.2
Providing and fixing Steel work welded in built up section/framed (including M.S. angle, plate, sq.bar, flat, m.s.tubular section, Heavy type hinges) work incuding cutting, hoisting, fixing in position and applying apriming coat of approved steel primer, two or more coats of synthetic enamel paint with approved make and brand in grating, frames, guard bar, ladder, railings for balconies and straircase, brackets, gates and similar works as per direction of Engineer-In-Charge. (All structural steel contractor's own supply). Ground Floor
911.25
-
72.45
First Floor
573.75
-
72.45
Second floor
60.75
-
72.45
Supplying, fitting, fixing up window & Door (sliding type) made up UPVC SECTION as frame and shutter frame with 5mm thick Reflective glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge. Ground Floor
36.45
-
8500
First Floor
22.95
-
8500
2nd Floor
2.43
-
8500
Providing and laying Vitrified floor tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights. Ground Floor
396.6
-
1060.1
First Floor
138.6
-
1080.1
2nd Floor
5
-
1103.2
Providing and laying Vitrified Skirting tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of equivalent approved make, colours & shades laid on 12 mm thick cement mortar 1:3 (1cement: 3coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights. Ground Floor
48.25
-
1211.2
First Floor
18.83
-
1240
Second floor
1.43
-
1273.2
Providing and laying ANTI SKID ceramic floor tiles 300x300 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1cement:4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights. First Floor
267.23
-
892.7
Providing and fixing 1st quality Ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) minimum thickness 5mm of approved make in all colours, shades except burgundy, bottle green, black of size 300x200 in skirting and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per direction of Engineer-In-Charge. In all floors and all heights. First Floor
54.05
-
709.2
Providing and fixing 20mm thick Granite stone flooring (sample of Granite stone should be approved by Engineer-In-Charge) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights.Ground Floor
17.64
-
2191.6
Court Yard Concrete floor tiles 300x300 mm Heavy Duty (thickness to be specified by the manufacturer) 1st quality conforming toapproved make, colours & shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1cement : 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of EIC at all floors and all heights. Ground Floor
400.5
-
1164.7
Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-in-charge at all elevations including all material labour complete. in all floors and all heights.Ground Floor
605.22
-
131.4
First Floor
337.7
-
136.2
Second floor
153.38
-
141.7
Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. including interior wall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge. Ground Floor
1559.82
-
257.2
First Floor
607.47
-
263.5
Second floor
69.97
-
270.7
Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer - In-Charge at all floors and all heights including all material & labour complete. Ground Floor
36.45
-
190.2
First Floor
38.88
-
194.9
Second floor
2.43
-
200.2
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well ramed, consolidated and grouted with fine sand and finishing the top smooth including shuttering at the edges, excavation and disposing of surplus earth with a lead of 100m complete as per direction of Engineer-in-charge. Ground Floor
67.68
-
404.4
Providing, Fitting & Fixing of Stainless steel of 304 grade in hand railing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes connected with stainless steel pipes of diameter 15 mm (2 mm thick) in 3 rows as per approved design and specification including Cost of all Materials, Labour for fabrication, buffing & polishing, cost of all fixtures etc. Complete for all floors as per specification & direction of the Engineer-in-charge. Ground Floor
12.6
-
3464.9
First Floor
6.5
-
3464.9
Second floor
45.2
-
3464.9
Providing average 25mm thick grading concrete with cement concrete (1:2:2) using 6mm size crusher broken hard granite chips and 2% water proofing cement compound of approved quality over top of roof terrace including scraping and cleaning, close chipping if required, the roof surface, laying plastering and finishing smooth to required level and slope including rounding the corners at walls as per the direction of Engineer-in-charge including cost of all materials with taxes, royalties and transportation, sundries, T&P, watering and curing by ponding water over terrace slab up to required period etc. complete for all floors. Second Floor
170.3
-
413.31
Waterproofing for terrace deck slab including preparation of the surface: The top surface should be cleaned of all the dirt, loose materials and kept dry. Incase of the pot holes/cracks, the same shall be repaired with applying polymer based water proofing compound in two parts to be mixed throughly by applying slowly on surface.Second Floor
170.3
-
633
Providing and fixing UniStone or equivalent Glass reinforced concrete (G.R.C)BRICK tile in approved pattern i.e. ‘red’ , shade and size different textures of natural brick. The GRC brick tile shall have texture and shade of natural brick. The thickness of GRC brick tile shall be between 12 -14mm having weight of approximately 3–3.5 Kg per Sq Ft. The GRC brick tile should be made from ‘43 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ LANXESS or equivalent. The material casting should take place in FRP Molds.. The fixing of GRC brick tile should take place on rough plastered surface of 1:3 (cement: coarse sand) with Dual fixing procedure i.e. exterior grade Cement polymer based tile adhesive ‘UniStone Ultimate’ or equivalent to be applied with exterior grade cement polymer based grout in matching brick tile shade to be used to tile group.
66.82
-
1920
Providing and fixing Glass Reinforced Concrete (G.R.C) Screens in approved size, pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 – 4 Kg per Sq. Ft. and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ or equivalent. The material casting should take place in FRP Molds. The fixing of Screens should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer.
8.64
-
7086
Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of Wires- Finolex/Anchor/Polycab/HAVELLS/RR KABEL/KEI) or equivalent) (Make of Conduit-AKG/Anchor/Polycab or equivalent reputed make A catagory ISI marked as approved) (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) (Make of accessories- Anchor/Havells) (Make of G.I box, face plate & cover-Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa) or equivalent reputed make & model A catagory ISI marked as approved) Group C
47
-
1033
Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge.(Make of Wires- Finolex/Anchor/Polycab/HAVELLS/RR KABEL/KEI) or equivalent) (Make of Conduit-AKG/Anchor/Polycab or equivalent reputed make A catagory ISI marked as approved) (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) (Make of accessories- Anchor/Havells) (Make of G.I box, face plate & cover-Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa) or equivalent reputed make & model A catagory ISI marked as approved) Average Length: 3 mtr
48
-
372
Recessed wiring to ceiling fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of Wires- Finolex/Anchor/Polycab/HAVELLS/RR KABEL/KEI) or equivalent) (Make of Conduit-AKG/Anchor/Polycab or equivalent reputed make A catagory ISI marked as approved) (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) (Make of accessories- Anchor/Havells) (Make of G.I box, face plate & cover-Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa) or equivalent reputed make & model A catagory ISI marked as approved)
32
-
1466
Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer in Charge. (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent)
22
-
480
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer in Charge. (Make of Wires- Finolex/Anchor/Polycab/HAVELLS/RR KABEL/KEI) or equivalent) (Make of Conduit-AKG/Anchor/Polycab or equivalent reputed make A catagory ISI marked as approved) (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) (Make of accessories- Anchor/Havells) (Make of G.I box, face plate & cover-Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa) or equivalent reputed make & model A catagory ISI marked as approved)
6
-
717
Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer in Charge. (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent)
23
-
832
Recessed wiring for 6 pin 16 amp socket outlet with 16Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge. (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa) / Havells (Equivalent model) or equivalent)
35
-
616
Point wiring for Projector/A.C socket outlet with 16A plug socket and 16A control switch at nearest separate location . (Make of switch/socket- Schneider (Zencelo) / Legrand (myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent)
4
-
695
Recessed wiring for A.C socket outlet with 20 amp SPN, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure indusrial socket ,20A SP MCB including all accesories and connection as per direction of Engineer in Charge. (Make- Schneider (Zencelo) / Legrand (myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent)
13
-
991
Recessed wiring to submain in 4 x 16sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 50 mm dia non-metalic heavy duty PVC conduit along with 2 x 10 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) (AC DB)
20
-
658
Recessed wiring to submain in 4 x 10 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 40 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) (For PDB / P+ACDB)
35
-
456
Recessed wiring to submain in 4 x 6sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) (For LDB / UPS DB)
40
-
315
Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) (For SPN DB/ 2TR AC)
215
-
206
Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant)
120
-
171
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant)
1320
-
146
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equivalant)
250
-
132
Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ Isolator) (Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalent model) /ABB(Equivalant model) or equievalant.
3
-
2179
6 way (4 + 18 ), TPN , MCB DB double door horizontal type
2
-
2525
Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface /recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) (Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalent model) /ABB(Equivalant model) or equievalant.
3
-
1639
Supply and fixing of following rating 240 V Minature Circuit Breaker (MCB) having a sensitivity current up to 10kA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. (Make-LEGRAND- DX3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant.
102
-
132
Supply and fixing of following rating 240 V Residual Current Breaker with Overcurrent protection (RCBO) having a sensitivity current up to 100mA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. (Make-LEGRAND- DX3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant.
3
-
3764
25 amp rating FP RCBO, 30mA
1
-
4064
32 amp rating FP RCBO, 30mA
1
-
4188
40 amp rating FP RCBO, 100/300 mA
2
-
4631
63 amp rating FP RCBO, 100/300 mA
1
-
5234
Supply of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of following sizes of cable as required. (Make- POLYCAB / FINOLEX / HAVELLS) or equievalant reputed ISI MARKED MAKE
50
-
1051
3.5 C x50sq.mm Al
20
-
337
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size excedding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc. as required.
30
-
155
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade ofsize exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing RCC/HUME/STONEWARE/METAL pipe as required.
10
-
55
Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required.
20
-
119
Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface as required.
10
-
122
Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.
2
-
505
3.5 C x50sq.mm Al
2
-
316
Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including Busbars, interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used. ( Make of switchgear - LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/model) /ABB(Equivalant model) ISI marked) or equievalant make with proper model
1
-
185000
X RAY I/P PANEL with 100A 4P MCCB -1 No with digital Multifunction Meter and 3Nos LED Indication Lamps.
1
-
38145
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) as required.
4
-
4919
Extra for using salt and charcoal for G.I or copper plate earth as required
4
-
689
Providing and fixing 25 mm x 5 mm Copper strip in 40 mm dia G.I. pipe from earth electrode as required.
30
-
483
Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required.
20
-
516
Providing and fixing of lightning conductor finial made of 25mm dia 300 mm long, G.I tube,having single prong at top,with 85mm dia 6 mm thick G.I base plate including holes etc. complete as required
4
-
374
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)
100
-
57
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)
30
-
94
Providing and fixing of testing joint, made of 20 mm x 3 mm thick G.I. strip, 125 long with 4 nos of G.I. bolts, check nuts and spring washer etc complete as required.
4
-
62
Reveting, sweating and soldering of copper / G.I. tape ( with another copper / G.I. tape, base of the finial or any other metallic object) as required
20
-
146
Providing and laying of G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required.
120
-
91
Earthing with G.I. earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) as required.
4
-
2629
Extra for using salt and charcoal for G.I or copper plate earth as required
4
-
689
Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.
23
-
426
Surface mounted indoor type 18W ROUND LED Luminaire with LED Lamp Similar to JAQUAR Cat No. LNRO02R018SC / Wipro / Philips / Halonix / Panasonic or equivalent.
13
-
1098
Surface mounted indoor type 2'x2' SQUARE LED Luminaire with LED Lamp Similar to JAQUAR Cat No. LSVR01S036SC / Wipro / Philips / Halonix / Panasonic or equivalent.
47
-
4141
Concealed modular type Triangular bulkhead LED Luminaire with LED Lamp , 2 modular G.I box and 2 module faceplate with frame Similar to Legrand Cat No. 078572/70 with 689007 and 673242 or equivalent.
1
-
590
Surface mounted indoor type 10W BULK HEAD LED Luminaire with LED Lamp Similar to WIPRO Cat No. LW07-141-XXX-57-G1 / JAQUAR / Philips / Halonix / Panasonic or equivalent.
5
-
1061
Surface mounted indoor type 10W MIRROR LED Luminaire with LED Lamp Similar to WIPRO Cat No. LL20-111-XXX-65NE3 / JAQUAR / Philips / Halonix / Panasonic or equivalent.
1
-
464
Supply, fixing & termination of Outdoor type IP66 30W Street Light Luminaire with die cast aluminium housing & polycarbonate cover similar to JAQUAR Cat No. LTRUMP0030XC or equivalent.
4
-
2326
Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.
4
-
759
Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required.
1
-
122
Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
32
-
2318
Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
3
-
2839
Recessed wiring to telephone point with clip in type modular telephone socket (RJ 11) ISI marked mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.
13
-
400
Recessed wiring to television point with clip in type modular television socket ISI marked mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.
2
-
372
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
4
-
180
Supplying and fixing of 25mm PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
200
-
104
Supplying and drawing one pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.
450
-
41
Supply and drawing of TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid & protected with FR PVC sheath in existing surface / recessed STEEL / PVC conduit as required.
30
-
45
Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate.
1
-
3500
Supply and fixing of fire buckets with angular fabricated stand to fix 4 buckets in each stand for Electrical fire protection as per standards of Electrical Inspectorate.
1
-
1500
Supply and fixing of Co2 fire extinguisher with mounting clamps with pressure test certificate .
2
-
7500
Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room.
1
-
650
Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room.
1
-
1500
Pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all complete as per specification
32.6
-
165
20 mm Pipe
45.8
-
207.2
25 mm Pipe
38.9
-
258.9
40 mm Pipe
25.7
-
326.7
Cutting holes through existing brick work (250 mm thick wall)
45
-
53.4
Cutting hole in R.C.C floors, roofs
39
-
186.4
Cutting grooves in pucca floors and walls
56.4
-
205.44
Bib cock
5
-
1631.5
Long body Bib Cock
4
-
1934.5
Angular Stop cock
18
-
915.3
Pillar cock
7
-
1934.5
25mm dia Brass / Gun meta ball Valve
6
-
1006
40mm dia Brass / Gun meta ball Valve
4
-
1309
15mm dia PVC connection pipe 450 mm long
18
-
252.8
Waste Pipe
18
-
75.8
Stainless steel jalli (grating)
20
-
185.3
Health Faucet
3
-
2009
2000 litre capacity water storage tanks
1
-
24402.1
110mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme)
33.6
-
287.2
110mm U-PVC door Tee
15
-
222.27
110mm U-PVC offset
15
-
105
110mm U-PVC door bend
15
-
162
110mm U-PVC plain shoe bend
15
-
147
110mm U-PVC vent cowl
4
-
40
110mm P-trap
12
-
299.7
110mm U-PVC plain bend
15
-
147
10 liters capacity low level flushing cistern
3
-
1600.3
Water Closet (European type W.C. pan)
3
-
7815
Wash basins
9
-
1826.1
Sink
2
-
2240.3
Mirror
7
-
777.2
Glass-shelf
3
-
1534
Towel Ring
5
-
609.75
Soap Case
7
-
765.9
Urinal
2
-
2024.4
Urinal Partition
2
-
2842.5
Robe Hook
10
-
824.2
Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.
6
-
1366.7
Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in CM (1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in (1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxes etc. all complete as per aproved drawing , specification and direction of Engineer-in-charge.
6
-
8260.6
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge.
29.9
-
241.8
110 mm dia U-PVC pipes Class-3 (0.60 mpa)
35.5
-
287.2
160 mm dia U-PVC pipes Class-3 (0.60 mpa)
49
-
489.2
Supplying all materials, labour, T&P and constructing Man hole chamber of the following size with cement concrete (1:3:6) using 40 mm size HG metal on bed , !st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4) mix using 12 mm size H.G chips with RCC man hole cover , earth work in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all completed as per approved drawing, specification and direction of Engineer-in-charge.
6
-
16036.05
Supplying all materials,labour T&P and providing fitting submersible pump with squarrel cage inspection type submerssible type submersible electric motor to run on 3 phase/1 phase line voltage rangingfrom 320 volt to 450 volt conforming to IS :8034/89
1
-
14550
Control Pannel.
1
-
5000
2.5 Sq mm cable.
28
-
152
40mm dia steel short piece.
2
-
230
Steel rope wit cover.
18
-
45
Well Cap.
1
-
202
50mm size CI bracket.
1
-
121.2
20mm dia rigid HDPE pipes.
17
-
105
Earth work up to 30 mtr.
5
-
432
Earth work 30 to 50 mtr.
8
-
590
5'' ASTM pipe SCH-80
20
-
1090
Delivery
1
-
1200
Labour charges for lowering of summerssible pumpset with pipes and cables etc with testing and commissioning at site.
1
-
15000
Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.
27.84
-
186.9
1 x 5.80 m x 3.20 m x 1.50 m=27.84 cum
27.84
-
186.9
1 x 5.80 m x 3.20 m x 0.15 m=2.784 cum
2.78
-
333.4
Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.
2.78
-
4601.2
Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
2.07
-
4601.2
Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
22.06
-
4036.2
1 x 0.50 m x 0.50 m x 0.50 m = 0.125cum
0.13
-
4069.2
Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
49.2
-
136.8
Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
38
-
163.6
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
7.64
-
419.7
Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
1.4
-
7907
Supplying all materials, labour, T&P and providing reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
1.48
-
4846.5
Supplying all materials, labour, T&P and making M.S. Step Iron in 20mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.
14
-
122.2
Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.
1.62
-
4846.5
Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.
2
-
559.1
Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
41.65
-
143.1
Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.
22.87
-
124.6
Earth excavation 3.14x2x2x2.5/4=7.85cum
7.85
-
186.9
Sand filling 3.14x 1.45x0.45x0.05=0.102cum
0.1
-
333.4
P.C.C(1:4:8) , 3.14x1.45x0.45x0.1=0.205cum
0.21
-
4601.2
Total=3.4 cum
3.4
-
4069.2
12mm C.P in C.M(1:6),3.14x1.1x0.47=1.62 sqm
1.62
-
136.8
Cement punning,same as C.P=1.62sqm
1.62
-
163.6
Brick Khoa 3.14x1.1x1.8=6.22sqm
6.22
-
262.3
R.C.C slab cover of M-20,3.14x1.6x1.6x0.1/4=0.201cum
0.2
-
4846.5
Reinforcement,0.201cum x 0.6 qntl/cum=0.12qntl
0.12
-
7907
Earthwork in excavation of foundation trenches in All kinds of soil including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge.
61.6
-
207.9
Large Animal Treatment Shed
18.36
-
207.9
Driving & Errecting 375 mm dia Double under reamed Pile foundation of length 6.0 mtr Long with RCC M-25 using 12 mm black hard granite (crusher broken) stone chips including cost of boreholes, Casting & bentonite power, all material, labour, T&P but excluding cost of steel reinforcement and labour chrages for cutting, bending and binding of steel. etc. complete as per direction of Engineer-in-charge.
72
-
8792.87
Large Animal Treatment Shed
16
-
8792.87
Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge.
41.27
-
140
Large Animal Treatment Shed
12.3
-
140
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only).
86.95
-
294.4
Large Animal Treatment Shed
30.69
-
294.4
Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
168
-
160
Large Animal Treatment Shed
45
-
160
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland slag cement (PSC) with 40 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge.
7.57
-
4865.36
Large Animal Treatment Shed
2.46
-
4865.36
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland Slag Cement (PSC) with 12mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
16.8
-
5503.56
Large Animal Treatment Shed
3.5
-
5503.56
First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix (1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
21.94
-
4322.31
Large Animal Treatment Shed
9.26
-
4322.31
First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
52.08
-
4360.63
Main Building
1.95
-
4577.49
Providing, lifting, hoisting and laying Reinforced cement concrete of M-250 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
83.82
-
5453.75
Large Animal Treatment Shed
19.85
-
5453.75
Providing strong, rigid, leveled and plumbed centering and shuttering to required shape and size for all kinds of R.C.C. works in the items mentioned below with wooden centering materials with all necessary bracing, ties and supports with level centering covered with bituminous paper including provision of necessary holes and pockets, fan hooks or boxes, switch and board insert plates, clamps and extension bars etc. as per the direction of the Engineer-in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete.
54
-
106.7
Large Animal Treatment Shed
4.5
-
106.7
Main Building
15.12
-
741.49
Large Animal Treatment Shed
0.3
-
741.49
Main Building
4.34
-
106.7
Large Animal Treatment Shed
49.88
-
106.7
Main Building
5.57
-
741.49
Large Animal Treatment Shed
16.8
-
741.49
Main Building
2.51
-
271.68
Main Building
13.26
-
437.06
Main Building
146.61
-
741.49
Large Animal Treatment Shed
3.04
-
741.49
Main Building
168
-
437.06
Large Animal Treatment Shed
5.53
-
437.06
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer-In-Charge.
110.44
-
7992.67
Large Animal Treatment Shed
25.8
-
7992.67
Providing 12mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge.
181.85
-
137.77
Large Animal Treatment Shed
26
-
137.77
Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge.
334.28
-
196.72
Large Animal Treatment Shed
26
-
196.72
Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning closed deep chipping with slurry treatment and finished smooth to all R.C.C surface including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge.
192.03
-
154.84
Large Animal Treatment Shed
55.25
-
154.84
Providing and laying Vitrified floor tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.
154.28
-
940.23
Providing and laying Vitrified skirting tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 12 mm thick cement mortar 1:3 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of EIC at all floors and all heights.
21.99
-
1033.57
Providing and fixing 18mm thick mirror polished granite stone slab, machine cut stone (sample of granite should be approved by EIC) for kitchen platforms, vanity counters, facias and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge, making gas pipe hole etc. laid over 25mm thick bed of cement mortar 1:1 (1 cement: 1 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. In all floors and all heights.
17.11
-
2048.2
Providing and laying Matte Finish Vitrified floor tiles 300x300 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 25 mm thick cement mortar 1:1 (1cement:1coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.
9.58
-
829.57
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) minimum thickness 5mm of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make in all colours, shades except burgundy, bottle green, black of size 300x200 in skirting and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per direction of Engineer-In-Charge. In all floors and all heights.
43.76
-
776.56
Providing and fixing 16mm thick Kota stone flooring/skirting (sample of Kota stone should be approved by Engineer-In-Charge) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights.
35
-
921
Providing and fixing seasoned sal wood work in frames at any locations including doors, windows,cupboard, clerestory and other frames fixing in position including cost of hinges, M.S. flat (30mm x 6mm) hold fasts lugs or dash fasteners of required dia and length as per drawing/specification, at all floors and all heights.
0.4
-
51799.9
Providing, fitting and fixing of approved make 35mm thick (laminate finished thickness of the door) factory made flush doors of the followings size finished with 1mm thk. laminate of approved colour & shade to both side fixed to the teak wood bidding, complete in all respect bidding/lipping as per drawing/design. The door will be provided with all necessary fittings & fixtures, i.e. Baan Code-LKYPDC527), 125x75x3mm (code no-7912) SS201 hinges, etc. of approved make with all materials, labour, T&P, taxes etc. as per direction of Architect/Engineer-in-Charge.
19.85
-
4877
Supplying fitting, fixing Fatory made single leaf rigid FRP sandwich composite Door Frame & shutter (allternatly GRP) of 32 mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised isopathalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) mpregnate with orthopthalic polysterskin. The thickness of the skins shall not be less than 1.5 mm Expanded polystyone(EPS) structural foam panel of 29 mm thickness and a density of 20 kg/cu.mtr shall be used as core material. Wooded reinforcement made of seaoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinfocements for fitting the metal fittings such as tower bolt, aldrop. hanles, etc. shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material. The material and process for manufacturing the door shutters shall be conform to RV- TIFAC composite design Center's standards and specifications and the door shutters tested in conforming to IS: 4020-1998. The finish door shutter will be plain colour as per specification and diection of Engineer-In-Charge.
4.73
-
3500
Supplying, fitting, fixing up window (sliding type) made up Black Powder Coated aluminum Section 151-154, 151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick Reflective glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-In-charge. A) Powder coated aluminium approved colour (minimum thickness of powder coating 50 micron)
25.38
-
5776.2
Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (All steel sections contractor's own supply).
634.5
-
68.73
Providing and fixing Steel work welded in built up section/framed (including M.S. angle,plate, sq.bar,flat,m.s.tubular section, Heavy type hinges) work incuding cutting,hoisting,fixing in position and applying apriming coat of approved steel primer, two or more coats of synthetic enamel paint with approved make and brand in grating,frames,guard bar,ladder,railings for balconies and straircase, brackets, gates and similar works as per direction of Engineer-In-Charge.(All structural steel contractor's own supply).
113.4
-
68.73
Providing & Applying priming coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
708.15
-
58.53
Large Animal Treatment Shed
107.25
-
58.53
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall n external surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
181.85
-
85.04
Large Animal Treatment Shed
26
-
85.04
Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-Charge at all elevations including all material labour complete.
181.85
-
72.35
Large Animal Treatment Shed
107.25
-
72.35
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall on interior surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
526.31
-
85.51
Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. including interior wall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge.
526.31
-
75
Providing & Applying priming coat with ready mixed pink or gray primer of approved brand and manufacture on wood/Ply work (hard and soft wood)as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
12.92
-
58.53
Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour complete.
49.15
-
69.44
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
36.61
-
333.2
Providing and fixing Wall panelling/Partition made out of 12 mm ply,1 mm thick laminate ( over partition/ wall panelling for design ) complete with necessary Hardwood etc. as per the detail design including the cost of all materials, labour, overheads and T & P etc. complete .as per the direction of the Engineer in charge.
30.24
-
9619
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well ramed, consolidated and grouted with fine sand and finishing the top smooth including shuttering at the edges, excavation and disposing of surplus earth with a lead of 100m.
35.16
-
543.48
Large Animal Treatment Shed
15.6
-
543.48
Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor.
168
-
299.27
Large Animal Treatment Shed
55.25
-
299.27
Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type Modular switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL) (Make of Modular Box-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) Group-C .
20
-
1033
Ex.fan point controlled by one 6A switch
3
-
1033
Call bell point controlled by one 6A switch
1
-
1033
Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)
13
-
464
Recessed wiring to ceiling fan point including modular Stepped type regulator with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)
9
-
1538
Supply & fixing of 5 / 6 amp socket outlet on existing switch board with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
5
-
535
Supply, fixing with recessed wiring to 5 / 6 amp socket outlet on separate board 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.
8
-
716
Supply & fixing of 6 pin 16 amp socket outlet with 16Amp Switch, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
3
-
672
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
(For subsequent point of group control )
30
-
132
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (From BDB to Switch Board & 16A socket points )
150
-
146
Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(For BDB-L's )
20
-
206
Recessed wiring to submain in 4 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (For BDB-P's)
30
-
315
Supply, fixing of indoor type 1 No tamper proof 3 phase 4 wire KWH meter box with provision of 1no 5-30A Digital KWH meter in tamper-proof enclosure with locking & sealing arrangement and viewing window as approved by Supply authority
1
-
7389
Supplying and fixing of 1 No ICTP box with 3no. 63A, 440V kit kat fuse in Metallic enclosure with locking arrangement as approved by Supply authority
1
-
2956
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Legrand/Hager/Siemens/Schneider make, or any other equivalent of reputed make ISI marked as approved.
12
-
132
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted following sizes TPN , MCB DB suitable for 415 V, 3phase, 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.(But without MCB/ RCCB/ ISOLATOR) (Legrand/L&T/ Schneider) .
1
-
2179
Supplying and fixing 25-63 Amps rating, FP, 415 volts, RCCB,100mA (L&T / Legrand/ Siemens /Schneider) make or any other reputed equivalent catagories make ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
-
2152
Supply of material , laying & termination of 2Cx6sqmm weather proof PVC insulated PVC sheathed aluminium Conductor unarmoured Service Connection wire from the nearest LTOH line support upto the tamper proof KWH meter boards alongwith 10 SWG G.I support wire etc. completea as required and as per direction of Engineer-in-charge.
50
-
167
Supply & fixing of 1.5.mtr long G.I bend pipe made out of 25 mm dia, medium duty G.I Pipe to be fixed on the wall ffor receiving Service Connection wire upto the meter board as per the approval of local supply authority.
1
-
476
Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.(Make-Philips/ Bajaj/ Havells/ Crompton)
6
-
88
1x20W LED TL fitting with all connections similar to Jaquar lighting item No LGLZ01X020XN or equivalent
23
-
733
1x15W LED Surface fitting with all connections similar to Jaquar lighting item No LZET03R015XC or equivalent
4
-
2350
Supply, fixing & termination of Outdoor Street Light LED Luminaire with 45w LED Lamp ( with external SPD 10kV) similar to Jaquar Item No LSTR01S045XC or equivalent to / Philips / Crompton / Wipro Make complete and interconnections with 3Cx1.5sqmm FRLS PVC insulated cable.
1
-
6648
Supply, Installation, Testing and Commissioning of BEE 5 star rated ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
8
-
2601
Supply, Installation, Testing and Commissioning of BEE 5 star rated ceiling fan 1400mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
1
-
2802
Supply, Installation, testing and commissioning of exhaust fan of 225 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
3
-
2548
Providing and fixing extra down rod of 50 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required . ( more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored
1
-
59
Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required.
1
-
179
Numbering ceiling fan / exhaust fan / fluorescent fittings as required
46
-
25
Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
1
-
394
Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.
25
-
45
Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
25
-
100
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
( Tel junction Box)
1
-
182
Supplying & Commissioning of Telephone Hand Set.
1
-
736
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
2
-
5704
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
30
-
474
Supplying and laying 25 mm x 5 mm CU earth strip ISI marked on surface or in recess for connection etc as required.
20
-
534
Supply of material & laying under ground/ floor/ wall including making end termination and testing of following size of Cu/G.I. wire for loop earthing of equipments, switch boards & panels as required comlete as per direction of Engineer-in-charge.
15
-
91
Pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all complete as per specification
18.9
-
165
20 mm Pipe
35.3
-
207.2
25 mm Pipe
28.2
-
258.9
40 mm Pipe
25
-
326.7
Cutting holes through existing brick work (250 mm thick wall)
32
-
53.4
Cutting hole in R.C.C floors, roofs
30
-
186.4
Cutting grooves in pucca floors and walls
45
-
205.44
Bib cock
5
-
1631.5
Long body Bib Cock
2
-
1934.5
Angular Stop cock
10
-
913.8
Pillar cock
3
-
1934.5
25mm dia Brass / Gun meta ball Valve
2
-
1006
40mm dia Brass / Gun meta ball Valve
1
-
1309
15mm dia PVC connection pipe 450 mm long
10
-
252.8
Waste Pipe
10
-
75.8
Stainless steel jalli (grating)
10
-
172.95
Health Faucet
3
-
2009
1000 litre capacity water storage tanks
1
-
13948.6
110mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme)
30
-
287.2
110mm U-PVC door Tee
6
-
222.27
110mm U-PVC offset
6
-
105
110mm U-PVC door bend
6
-
162
110mm U-PVC plain shoe bend
6
-
147
110mm U-PVC vent cowl
3
-
40
110mm P-trap
7
-
299.7
110mm U-PVC plain bend
8
-
147
10 liters capacity low level flushing cistern
3
-
1600.3
Water Closet (European type W.C. pan)
3
-
7815
Wash basins
3
-
1826.1
Sink
1
-
2240.3
Mirror
3
-
777.2
Glass-shelf
3
-
1534
Towel Rail
4
-
1018.5
Soap case
3
-
765.9
Urinal
2
-
2024.4
Urinal Partition
1
-
2842.5
Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.
1
-
1406.2
Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in CM (1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in (1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxes etc. all complete as per aproved drawing , specification and direction of Engineer-in-charge.
1
-
8858.1
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge.
10
-
287.2
160 mm dia U-PVC pipes Class-3 (0.60 mpa)
10
-
489.2
Supplying all materials, labour, T&P and constructing Man hole chamber of the following size with cement concrete (1:3:6) using 40 mm size HG metal on bed , !st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4) mix using 12 mm size H.G chips with RCC man hole cover , earth work in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all completed as per approved drawing, specification and direction of Engineer-in-charge.
1
-
16994.55
Supplying all materials,labour T&P and providing fitting submersible pump with squarrel cage inspection type submerssible type submersible electric motor to run on 3 phase/1 phase line voltage rangingfrom 320 volt to 450 volt conforming to IS :8034/89
1
-
14550
Control Pannel.
1
-
5000
2.5 Sq mm cable.
28
-
152
40mm dia steel short piece.
2
-
230
Steel rope wit cover.
18
-
45
Well Cap.
1
-
202
50mm size CI bracket.
1
-
121.2
20mm dia rigid HDPE pipes.
17
-
105
Earth work up to 30 mtr.
5
-
432
Earth work 30 to 50 mtr.
8
-
590
5'' ASTM pipe SCH-80
20
-
1090
Delivery
1
-
1200
Labour charges for lowering of summerssible pumpset with pipes and cables etc with testing and commissioning at site.
1
-
15000
Earth work excavation in foundation (3.22 x 2.02 x 1.9=12.36 cum)
12.36
-
207.9
Sand filling 3.22x 2.02x0.05=0.33cum
0.33
-
275.17
Cement Concrete(1:4:8) 3.22x2.02x0.1=0.65 cum
0.65
-
4487.95
Total=4.97 cum
4.97
-
4360.63
Total=15.62sqm
15.62
-
126.53
Cement Punning,15.62 sqm
15.62
-
160.03
Cement concrete(1:2:4),2.3x1.1=2.53 Sqm in flooring
2.53
-
6218.65
Total=0.448cum
0.45
-
4574.63
Reinforcement=0.448x0.88qntl/cum=0.39 Qntl
0.39
-
7992.67
Total=2.53+0.88=3.41sqm
3.41
-
437.06
M.S Steps,6 nos
6
-
250
Filling in foundation with excavated material,12.36-0.65-4.97-4.55=2.19cum
2.19
-
212.9
C.I Man Hole cover of 450mm dia. Over septic tank
1
-
4500
Ventilating pipe with cowl,Sepreme make (Single socket,1.8m+vent cowl)=266.5+24.3=290.80+4% vat of 290.80=302.31
1
-
302.31
Earth excavation 3.14x2x2x2.5/4=7.85cum
7.85
-
207.9
Sand filling 3.14x 1.45x0.45x0.05=0.102cum
0.1
-
275.17
P.C.C(1:4:8) , 3.14x1.45x0.45x0.1=0.205cum
0.21
-
4487.95
Total=3.4 cum
3.4
-
4360.63
12mm C.P in C.M(1:6),3.14x1.1x0.47=1.62 sqm
1.62
-
126.53
Cement punning,same as C.P=1.62sqm
1.62
-
160.03
Brick Khoa 3.14x1.1x1.8=6.22sqm
6.22
-
268.3
R.C.C slab cover of M-20,3.14x1.6x1.6x0.1/4=0.201cum
0.2
-
4574.63
Reinforcement,0.201cum x 0.6 qntl/cum=0.12qntl
0.12
-
7992.67
Earthwork in excavation of foundation trenches in All kinds of soil including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge.
65.39
-
207.9
Large Animal Treatment Shed
18.36
-
207.9
Driving & Errecting 375 mm dia Double under reamed Pile foundation of length 6.0 mtr Long with RCC M-25 using 12 mm black hard granite (crusher broken) stone chips including cost of boreholes, Casting & bentonite power, all material, labour, T&P but excluding cost of steel reinforcement and labour chrages for cutting, bending and binding of steel. etc. complete as per direction of Engineer-in-charge.
76
-
8792.87
Large Animal Treatment Shed
16
-
8792.87
Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge.
43.81
-
140
Large Animal Treatment Shed
12.3
-
140
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only).
108.24
-
275.17
Large Animal Treatment Shed
30.69
-
275.17
Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
213.7
-
160
Large Animal Treatment Shed
45
-
160
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland slag cement (PSC) with 40 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge.
8.05
-
4865.36
Large Animal Treatment Shed
2.46
-
4865.36
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland Slag Cement (PSC) with 12mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
21.37
-
5503.56
Large Animal Treatment Shed
3.5
-
5503.56
First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix (1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
20.02
-
4322.31
Large Animal Treatment Shed
9.26
-
4322.31
First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
84.7
-
4360.63
First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:4) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
4.06
-
4577.49
Providing, lifting, hoisting and laying Reinforced cement concrete of M-250 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
108.94
-
5453.75
Large Animal Treatment Shed
20
-
5453.75
Providing strong, rigid, leveled and plumbed centering and shuttering to required shape and size for all kinds of R.C.C. works in the items mentioned below with wooden centering materials with all necessary bracing, ties and supports with level centering covered with bituminous paper including provision of necessary holes and pockets, fan hooks or boxes, switch and board insert plates, clamps and extension bars etc. as per the direction of the Engineer-in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete.
57
-
106.7
Large Animal Treatment Shed
12
-
106.7
Main Building
15.3
-
741.49
Large Animal Treatment Shed
3.6
-
741.49
Main Building
54.83
-
106.7
Large Animal Treatment Shed
56.53
-
106.7
Main Building
84.15
-
741.49
Large Animal Treatment Shed
19.8
-
741.49
Main Building
18.13
-
271.68
Main Building
14.94
-
437.06
Main Building
54.83
-
741.49
Large Animal Treatment Shed
34.43
-
741.49
Main Building
213.7
-
437.06
Large Animal Treatment Shed
55.25
-
437.06
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer-In-Charge.
93.43
-
7992.67
Large Animal Treatment Shed
26.06
-
7992.67
Providing 12mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge.
190.67
-
137.77
Large Animal Treatment Shed
26
-
137.77
Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge.
453.6
-
196.72
Large Animal Treatment Shed
26
-
196.72
Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning closed deep chipping with slurry treatment and finished smooth to all R.C.C surface including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge.
237.73
-
154.84
Large Animal Treatment Shed
55.25
-
154.84
Providing and laying Vitrified floor tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.
171.49
-
940.23
Providing and laying Vitrified skirting tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 12 mm thick cement mortar 1:3 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of EIC at all floors and all heights.
24.47
-
1033.57
Providing and fixing 16mm thick Kota stone flooring/skirting (sample of Kota stone should be approved by Engineer-In-Charge) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights.
35
-
776.5
Providing and fixing 18mm thick mirror polished granite stone slab, machine cut stone (sample of granite should be approved by EIC) for kitchen platforms, vanity counters, facias and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge, making gas pipe hole etc. laid over 25mm thick bed of cement mortar 1:1 (1 cement: 1 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. In all floors and all heights.
7.25
-
2048.2
Providing and laying Matte Finish Vitrified floor tiles 300x300 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 25 mm thick cement mortar 1:1 (1cement:1coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.
14.08
-
829.57
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) minimum thickness 5mm of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make in all colours, shades except burgundy, bottle green, black of size 300x200 in skirting and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per direction of Engineer-In-Charge. In all floors and all heights.
59.79
-
776.56
Providing and fixing seasoned sal wood work in frames at any locations including doors, windows,cupboard, clerestory and other frames fixing in position including cost of hinges, M.S. flat (30mm x 6mm) hold fasts lugs or dash fasteners of required dia and length as per drawing/specification, at all floors and all heights.
0.41
-
51799.9
Providing, fitting and fixing of approved make 35mm thick (laminate finished thickness of the door) factory made flush doors of the followings size finished with 1mm thk. laminate of approved colour & shade to both side fixed to the teak wood bidding, complete in all respect bidding/lipping as per drawing/design. The door will be provided with all necessary fittings & fixtures, i.e. Baan Code-LKYPDC527), 125x75x3mm (code no-7912) SS201 hinges, etc. of approved make with all materials, labour, T&P, taxes etc. as per direction of Architect/Engineer-in-Charge.
20.79
-
4877
Supplying fitting, fixing Fatory made single leaf rigid FRP sandwich composite Door Frame & shutter (allternatly GRP) of 32 mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised isopathalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) mpregnate with orthopthalic polysterskin. The thickness of the skins shall not be less than 1.5 mm Expanded polystyone(EPS) structural foam panel of 29 mm thickness and a density of 20 kg/cu.mtr shall be used as core material. Wooded reinforcement made of seaoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinfocements for fitting the metal fittings such as tower bolt, aldrop. hanles, etc. shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material. The material and process for manufacturing the door shutters shall be conform to RV- TIFAC composite design Center's standards and specifications and the door shutters tested in conforming to IS: 4020-1998. The finish door shutter will be plain colour as per specification and diection of Engineer-In-Charge.
4.73
-
3500
Supplying, fitting, fixing up window (sliding type) made up Black Powder Coated aluminum Section 151-154, 151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick Reflective glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-In-charge.
28.38
-
5776.2
Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (All steel sections contractor's own supply).
709.5
-
68.73
Providing and fixing Steel work welded in built up section/framed (including M.S. angle,plate, sq.bar,flat,m.s.tubular section, Heavy type hinges) work incuding cutting,hoisting,fixing in position and applying apriming coat of approved steel primer, two or more coats of synthetic enamel paint with approved make and brand in grating,frames,guard bar,ladder,railings for balconies and straircase, brackets, gates and similar works as per direction of Engineer-In-Charge.(All structural steel contractor's own supply).
113.4
-
68.73
Providing & Applying priming coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
882
-
58.53
Large Animal Treatment Shed
107.25
-
58.53
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall n external surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
190.67
-
85.04
Large Animal Treatment Shed
26
-
85.04
Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-Charge at all elevations including all material labour complete.
190.67
-
71.07
Large Animal Treatment Shed
107.25
-
71.07
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall on interior surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
691.33
-
66.33
Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. including interior wall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge.
691.33
-
77.3
Providing & Applying priming coat with ready mixed pink or gray primer of approved brand and manufacture on wood/Ply work (hard and soft wood)as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
13.05
-
56.79
Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour complete.
52.58
-
134.76
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
52.3
-
267.3
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well ramed, consolidated and grouted with fine sand and finishing the top smooth including shuttering at the edges, excavation and disposing of surplus earth with a lead of 100m.
37.74
-
543.48
Large Animal Treatment Shed
15.6
-
543.48
Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor.
213.7
-
299.27
Large Animal Treatment Shed
55.25
-
299.27
Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type Modular switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL) (Make of Modular Box-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) Group-C .
19
-
1033
Ex.fan point controlled by one 6A switch
3
-
1033
Call bell point controlled by one 6A switch
1
-
1033
Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)
15
-
464
Recessed wiring to ceiling fan point including modular Stepped type regulator with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)
9
-
1538
Supply & fixing of 5 / 6 amp socket outlet on existing switch board with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
8
-
535
Supply, fixing with recessed wiring to 5 / 6 amp socket outlet on separate board 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.
11
-
716
Supply & fixing of 6 pin 16 amp socket outlet with 16Amp Switch, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
8
-
672
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
(For subsequent point of group control )
30
-
132
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (From BDB to Switch Board & 16A socket points )
250
-
146
Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(For BDB-L's )
20
-
206
Recessed wiring to submain in 4 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (For BDB-P's)
30
-
315
Supply, fixing of indoor type 1 No tamper proof 3 phase 4 wire KWH meter box with provision of 1no 5-30A Digital KWH meter in tamper-proof enclosure with locking & sealing arrangement and viewing window as approved by Supply authority
1
-
7389
Supplying and fixing of 1 No ICTP box with 3no. 63A, 440V kit kat fuse in Metallic enclosure with locking arrangement as approved by Supply authority
1
-
2956
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Legrand/Hager/Siemens/Schneider make, or any other equivalent of reputed make ISI marked as approved.
12
-
132
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted following sizes TPN , MCB DB suitable for 415 V, 3phase, 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.(But without MCB/ RCCB/ ISOLATOR) (Legrand/L&T/ Schneider) .
1
-
2179
Supplying and fixing 25-63 Amps rating, FP, 415 volts, RCCB,100mA (L&T / Legrand/ Siemens /Schneider) make or any other reputed equivalent catagories make ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
-
2152
Supply of material , laying & termination of 2Cx6sqmm weather proof PVC insulated PVC sheathed aluminium Conductor unarmoured Service Connection wire from the nearest LTOH line support upto the tamper proof KWH meter boards alongwith 10 SWG G.I support wire etc. completea as required and as per direction of Engineer-in-charge.
50
-
167
Supply & fixing of 1.5.mtr long G.I bend pipe made out of 25 mm dia, medium duty G.I Pipe to be fixed on the wall ffor receiving Service Connection wire upto the meter board as per the approval of local supply authority.
1
-
476
Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.(Make-Philips/ Bajaj/ Havells/ Crompton)
5
-
88
1x20W LED TL fitting with all connections similar to Jaquar lighting item No LGLZ01X020XN or equivalent
24
-
733
1x15W LED Surface fitting with all connections similar to Jaquar lighting item No LZET03R015XC or equivalent
5
-
2350
Supply, fixing & termination of Outdoor Street Light LED Luminaire with 45w LED Lamp ( with external SPD 10kV) similar to Jaquar Item No LSTR01S045XC or equivalent to / Philips / Crompton / Wipro Make complete and interconnections with 3Cx1.5sqmm FRLS PVC insulated cable.
1
-
6648
Supply, Installation, Testing and Commissioning of BEE 5 star rated ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
5
-
2601
Supply, Installation, Testing and Commissioning of BEE 5 star rated ceiling fan 1400mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
4
-
2802
Supply, Installation, testing and commissioning of exhaust fan of 225 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
3
-
2548
Providing and fixing extra down rod of 50 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required . ( more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored
4
-
59
Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required.
1
-
179
Numbering ceiling fan / exhaust fan / fluorescent fittings as required
47
-
25
Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
1
-
394
Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.
25
-
45
Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
25
-
100
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
( Tel junction Box)
1
-
182
Supplying & Commissioning of Telephone Hand Set.
1
-
736
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
2
-
5704
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
30
-
474
Supplying and laying 25 mm x 5 mm CU earth strip ISI marked on surface or in recess for connection etc as required.
20
-
534
Supply of material & laying under ground/ floor/ wall including making end termination and testing of following size of Cu/G.I. wire for loop earthing of equipments, switch boards & panels as required comlete as per direction of Engineer-in-charge.
15
-
91
Pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all complete as per specification
29.6
-
165
20 mm Pipe
42.9
-
207.2
25 mm Pipe
32.6
-
258.9
40 mm Pipe
30
-
326.7
Cutting holes through existing brick work (250 mm thick wall)
35
-
53.4
Cutting hole in R.C.C floors, roofs
30
-
186.4
Cutting grooves in pucca floors and walls
50
-
205.44
Bib cock
5
-
1631.5
Long body Bib Cock
2
-
1934.5
Angular Stop cock
10
-
913.8
Pillar cock
3
-
1934.5
25mm dia Brass / Gun meta ball Valve
2
-
1006
40mm dia Brass / Gun meta ball Valve
1
-
1309
15mm dia PVC connection pipe 450 mm long
10
-
252.8
Waste Pipe
10
-
75.8
Stainless steel jalli (grating)
10
-
172.95
Health Faucet
3
-
2009
1000 litre capacity water storage tanks
1
-
13948.6
110mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme)
30
-
287.2
110mm U-PVC door Tee
6
-
222.27
110mm U-PVC offset
6
-
105
110mm U-PVC door bend
6
-
162
110mm U-PVC plain shoe bend
6
-
147
110mm U-PVC vent cowl
3
-
40
110mm P-trap
7
-
299.7
110mm U-PVC plain bend
8
-
147
10 liters capacity low level flushing cistern
3
-
1600.3
Water Closet (European type W.C. pan)
3
-
7815
Wash basins
3
-
1826.1
Sink
1
-
2240.3
Mirror
3
-
777.2
Glass-shelf
3
-
1534
Towel Rail
4
-
1018.5
Soap case
3
-
765.9
Urinal
2
-
2024.4
Urinal Partition
1
-
2842.5
Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.
2
-
1406.2
Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in CM (1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in (1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxes etc. all complete as per aproved drawing , specification and direction of Engineer-in-charge.
2
-
8858.1
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge.
20
-
287.2
160 mm dia U-PVC pipes Class-3 (0.60 mpa)
20
-
489.2
Supplying all materials, labour, T&P and constructing Man hole chamber of the following size with cement concrete (1:3:6) using 40 mm size HG metal on bed , !st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4) mix using 12 mm size H.G chips with RCC man hole cover , earth work in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all completed as per approved drawing, specification and direction of Engineer-in-charge.
2
-
16994.55
Supplying all materials,labour T&P and providing fitting submersible pump with squarrel cage inspection type submerssible type submersible electric motor to run on 3 phase/1 phase line voltage rangingfrom 320 volt to 450 volt conforming to IS :8034/89
1
-
14550
Control Pannel.
1
-
5000
2.5 Sq mm cable.
28
-
152
40mm dia steel short piece.
2
-
230
Steel rope wit cover.
18
-
45
Well Cap.
1
-
202
50mm size CI bracket.
1
-
121.2
20mm dia rigid HDPE pipes.
17
-
105
Earth work up to 30 mtr.
5
-
432
Earth work 30 to 50 mtr.
8
-
590
5'' ASTM pipe SCH-80
20
-
1090
Delivery
1
-
1200
Labour charges for lowering of summerssible pumpset with pipes and cables etc with testing and commissioning at site.
1
-
15000
Earth work excavation in foundation (3.22 x 2.02 x 1.9=12.36 cum)
12.36
-
207.9
Sand filling 3.22x 2.02x0.05=0.33cum
0.33
-
275.17
Cement Concrete(1:4:8) 3.22x2.02x0.1=0.65 cum
0.65
-
4487.95
Total=4.97 cum
4.97
-
4360.63
Total=15.62sqm
15.62
-
126.53
Cement Punning,15.62 sqm
15.62
-
160.03
Cement concrete(1:2:4),2.3x1.1=2.53 Sqm in flooring
2.53
-
6218.65
Total=0.448cum
0.45
-
4574.63
Reinforcement=0.448x0.88qntl/cum=0.39 Qntl
0.39
-
7992.67
Total=2.53+0.88=3.41sqm
3.41
-
437.06
M.S Steps,6 nos
6
-
250
Filling in foundation with excavated material,12.36-0.65-4.97-4.55=2.19cum
2.19
-
212.9
C.I Man Hole cover of 450mm dia. Over septic tank
1
-
4500
Ventilating pipe with cowl,Sepreme make (Single socket,1.8m+vent cowl)=266.5+24.3=290.80+4% vat of 290.80=302.31
1
-
302.31
Earth excavation 3.14x2x2x2.5/4=7.85cum
7.85
-
207.9
Sand filling 3.14x 1.45x0.45x0.05=0.102cum
0.1
-
275.17
P.C.C(1:4:8) , 3.14x1.45x0.45x0.1=0.205cum
0.21
-
4487.95
Total=3.4 cum
3.4
-
4360.63
12mm C.P in C.M(1:6),3.14x1.1x0.47=1.62 sqm
1.62
-
126.53
Cement punning,same as C.P=1.62sqm
1.62
-
160.03
Brick Khoa 3.14x1.1x1.8=6.22sqm
6.22
-
268.3
R.C.C slab cover of M-20,3.14x1.6x1.6x0.1/4=0.201cum
0.2
-
4574.63
Reinforcement,0.201cum x 0.6 qntl/cum=0.12qntl
0.12
-
7992.67
Earthwork in excavation of foundation trenches in All kinds of soil including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge.
61.6
-
207.9
Large Animal Treatment Shed
18.36
-
207.9
Driving & Errecting 375 mm dia Double under reamed Pile foundation of length 6.0 mtr Long with RCC M-25 using 12 mm black hard granite (crusher broken) stone chips including cost of boreholes, Casting & bentonite power, all material, labour, T&P but excluding cost of steel reinforcement and labour chrages for cutting, bending and binding of steel. etc. complete as per direction of Engineer-in-charge.
72
-
8792.87
Large Animal Treatment Shed
16
-
8792.87
Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge.
41.27
-
138.6
Large Animal Treatment Shed
12.3
-
138.6
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only).
86.95
-
275.17
Large Animal Treatment Shed
30.69
-
275.17
Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
168
-
160
Large Animal Treatment Shed
45
-
160
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland slag cement (PSC) with 40 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge.
7.57
-
4865.36
Large Animal Treatment Shed
2.46
-
4865.36
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland Slag Cement (PSC) with 12mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
16.8
-
5503.56
Large Animal Treatment Shed
3.5
-
5503.56
First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix (1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
21.94
-
4322.31
Large Animal Treatment Shed
9.26
-
4322.31
First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
52.08
-
4360.63
First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:4) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
1.95
-
4577.49
Providing, lifting, hoisting and laying Reinforced cement concrete of M-250 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
83.82
-
5453.75
Large Animal Treatment Shed
19.85
-
5453.75
Providing strong, rigid, leveled and plumbed centering and shuttering to required shape and size for all kinds of R.C.C. works in the items mentioned below with wooden centering materials with all necessary bracing, ties and supports with level centering covered with bituminous paper including provision of necessary holes and pockets, fan hooks or boxes, switch and board insert plates, clamps and extension bars etc. as per the direction of the Engineer-in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete.
54
-
106.7
Large Animal Treatment Shed
4.5
-
106.7
Main Building
15.12
-
741.49
Large Animal Treatment Shed
0.3
-
741.49
Main Building
4.34
-
106.7
Large Animal Treatment Shed
4.99
-
106.7
Main Building
5.57
-
741.49
Large Animal Treatment Shed
1.5
-
741.49
Main Building
2.51
-
271.68
Main Building
13.26
-
437.06
Main Building
146.61
-
741.49
Large Animal Treatment Shed
3.04
-
741.49
Main Building
168
-
437.06
Large Animal Treatment Shed
5.53
-
437.06
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer-In-Charge.
110.44
-
7992.67
Large Animal Treatment Shed
25.8
-
7992.67
Providing 12mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge.
181.85
-
137.77
Large Animal Treatment Shed
26
-
137.77
Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge.
334.28
-
196.72
Large Animal Treatment Shed
26
-
196.72
Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning closed deep chipping with slurry treatment and finished smooth to all R.C.C surface including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge.
192.03
-
154.84
Large Animal Treatment Shed
55.25
-
154.84
Providing and laying Vitrified floor tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.
154.28
-
940.23
Providing and laying Vitrified skirting tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 12 mm thick cement mortar 1:3 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of EIC at all floors and all heights.
21.99
-
1033.57
Providing and fixing 18mm thick mirror polished granite stone slab, machine cut stone (sample of granite should be approved by EIC) for kitchen platforms, vanity counters, facias and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge, making gas pipe hole etc. laid over 25mm thick bed of cement mortar 1:1 (1 cement: 1 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. In all floors and all heights.
17.11
-
2048.2
Providing and laying Matte Finish Vitrified floor tiles 300x300 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 25 mm thick cement mortar 1:1 (1cement:1coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.
9.58
-
829.57
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) minimum thickness 5mm of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make in all colours, shades except burgundy, bottle green, black of size 300x200 in skirting and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per direction of Engineer-In-Charge. In all floors and all heights.
43.76
-
776.56
Providing and fixing 16mm thick Kota stone flooring/skirting (sample of Kota stone should be approved by Engineer-In-Charge) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights.
35
-
776.5
Providing and fixing seasoned sal wood work in frames at any locations including doors, windows,cupboard, clerestory and other frames fixing in position including cost of hinges, M.S. flat (30mm x 6mm) hold fasts lugs or dash fasteners of required dia and length as per drawing/specification, at all floors and all heights.
0.4
-
51799.9
Providing, fitting and fixing of approved make 35mm thick (laminate finished thickness of the door) factory made flush doors of the followings size finished with 1mm thk. laminate of approved colour & shade to both side fixed to the teak wood bidding, complete in all respect bidding/lipping as per drawing/design. The door will be provided with all necessary fittings & fixtures, i.e. Baan Code-LKYPDC527), 125x75x3mm (code no-7912) SS201 hinges, etc. of approved make with all materials, labour, T&P, taxes etc. as per direction of Architect/Engineer-in-Charge.
19.85
-
4877
Supplying fitting, fixing Fatory made single leaf rigid FRP sandwich composite Door Frame & shutter (allternatly GRP) of 32 mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised isopathalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) mpregnate with orthopthalic polysterskin. The thickness of the skins shall not be less than 1.5 mm Expanded polystyone(EPS) structural foam panel of 29 mm thickness and a density of 20 kg/cu.mtr shall be used as core material. Wooded reinforcement made of seaoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinfocements for fitting the metal fittings such as tower bolt, aldrop. hanles, etc. shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material. The material and process for manufacturing the door shutters shall be conform to RV- TIFAC composite design Center's standards and specifications and the door shutters tested in conforming to IS: 4020-1998. The finish door shutter will be plain colour as per specification and diection of Engineer-In-Charge.
4.73
-
3500
Supplying, fitting, fixing up window (sliding type) made up Black Powder Coated aluminum Section 151-154, 151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick Reflective glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-In-charge. A) Powder coated aluminium approved colour (minimum thickness of powder coating 50 micron)
25.38
-
5776.2
Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (All steel sections contractor's own supply).
634.5
-
68.73
Providing and fixing Steel work welded in built up section/framed (including M.S. angle,plate, sq.bar,flat,m.s.tubular section, Heavy type hinges) work incuding cutting,hoisting,fixing in position and applying apriming coat of approved steel primer, two or more coats of synthetic enamel paint with approved make and brand in grating,frames,guard bar,ladder,railings for balconies and straircase, brackets, gates and similar works as per direction of Engineer-In-Charge.(All structural steel contractor's own supply).
113.4
-
68.73
Providing & Applying priming coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
708.15
-
58.53
Large Animal Treatment Shed
107.25
-
58.53
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall n external surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
181.85
-
85.51
Large Animal Treatment Shed
26
-
85.51
Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-Charge at all elevations including all material labour complete.
181.85
-
72.35
Large Animal Treatment Shed
107.25
-
72.35
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall on interior surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
526.31
-
85.51
Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. including interior wall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge.
526.31
-
75
Providing & Applying priming coat with ready mixed pink or gray primer of approved brand and manufacture on wood/Ply work (hard and soft wood)as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
12.92
-
58.53
Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour complete.
49.15
-
69.44
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
36.61
-
333.2
Providing and fixing Wall panelling/Partition made out of 12 mm ply,1 mm thick laminate ( over partition/ wall panelling for design ) complete with necessary Hardwood etc. as per the detail design including the cost of all materials, labour, overheads and T & P etc. complete .as per the direction of the Engineer in charge.
30.24
-
9619
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well ramed, consolidated and grouted with fine sand and finishing the top smooth including shuttering at the edges, excavation and disposing of surplus earth with a lead of 100m.
35.16
-
543.48
Large Animal Treatment Shed
15.6
-
543.48
Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor.
168
-
299.27
Large Animal Treatment Shed
55.25
-
299.27
Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type Modular switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL) (Make of Modular Box-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) Group-C .
20
-
1033
Ex.fan point controlled by one 6A switch
3
-
1033
Call bell point controlled by one 6A switch
1
-
1033
Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)
13
-
464
Recessed wiring to ceiling fan point including modular Stepped type regulator with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)
9
-
1538
Supply & fixing of 5 / 6 amp socket outlet on existing switch board with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
5
-
535
Supply, fixing with recessed wiring to 5 / 6 amp socket outlet on separate board 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.
8
-
716
Supply & fixing of 6 pin 16 amp socket outlet with 16Amp Switch, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
3
-
672
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
(For subsequent point of group control )
30
-
132
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (From BDB to Switch Board & 16A socket points )
150
-
146
Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(For BDB-L's )
20
-
206
Recessed wiring to submain in 4 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (For BDB-P's)
30
-
315
Supply, fixing of indoor type 1 No tamper proof 3 phase 4 wire KWH meter box with provision of 1no 5-30A Digital KWH meter in tamper-proof enclosure with locking & sealing arrangement and viewing window as approved by Supply authority
1
-
7389
Supplying and fixing of 1 No ICTP box with 3no. 63A, 440V kit kat fuse in Metallic enclosure with locking arrangement as approved by Supply authority
1
-
2956
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Legrand/Hager/Siemens/Schneider make, or any other equivalent of reputed make ISI marked as approved.
12
-
132
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted following sizes TPN , MCB DB suitable for 415 V, 3phase, 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.(But without MCB/ RCCB/ ISOLATOR) (Legrand/L&T/ Schneider) .
1
-
2179
Supplying and fixing 25-63 Amps rating, FP, 415 volts, RCCB,100mA (L&T / Legrand/ Siemens /Schneider) make or any other reputed equivalent catagories make ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
-
2152
Supply of material , laying & termination of 2Cx6sqmm weather proof PVC insulated PVC sheathed aluminium Conductor unarmoured Service Connection wire from the nearest LTOH line support upto the tamper proof KWH meter boards alongwith 10 SWG G.I support wire etc. completea as required and as per direction of Engineer-in-charge.
50
-
167
Supply & fixing of 1.5.mtr long G.I bend pipe made out of 25 mm dia, medium duty G.I Pipe to be fixed on the wall ffor receiving Service Connection wire upto the meter board as per the approval of local supply authority.
1
-
476
Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.(Make-Philips/ Bajaj/ Havells/ Crompton)
6
-
88
1x20W LED TL fitting with all connections similar to Jaquar lighting item No LGLZ01X020XN or equivalent
23
-
733
1x15W LED Surface fitting with all connections similar to Jaquar lighting item No LZET03R015XC or equivalent
4
-
2350
Supply, fixing & termination of Outdoor Street Light LED Luminaire with 45w LED Lamp ( with external SPD 10kV) similar to Jaquar Item No LSTR01S045XC or equivalent to / Philips / Crompton / Wipro Make complete and interconnections with 3Cx1.5sqmm FRLS PVC insulated cable.
1
-
6648
Supply, Installation, Testing and Commissioning of BEE 5 star rated ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
8
-
2601
Supply, Installation, Testing and Commissioning of BEE 5 star rated ceiling fan 1400mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
1
-
2802
Supply, Installation, testing and commissioning of exhaust fan of 225 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
3
-
2548
Providing and fixing extra down rod of 50 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required . ( more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored
1
-
59
Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required.
1
-
179
Numbering ceiling fan / exhaust fan / fluorescent fittings as required
46
-
25
Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
1
-
394
Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.
25
-
45
Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
25
-
100
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
( Tel junction Box)
1
-
182
Supplying & Commissioning of Telephone Hand Set.
1
-
736
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
2
-
5704
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
30
-
474
Supplying and laying 25 mm x 5 mm CU earth strip ISI marked on surface or in recess for connection etc as required.
20
-
534
Supply of material & laying under ground/ floor/ wall including making end termination and testing of following size of Cu/G.I. wire for loop earthing of equipments, switch boards & panels as required comlete as per direction of Engineer-in-charge.
15
-
91
Pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all complete as per specification
18.9
-
165
20 mm Pipe
35.3
-
207.2
25 mm Pipe
28.2
-
258.9
40 mm Pipe
25
-
326.7
Cutting holes through existing brick work (250 mm thick wall)
32
-
53.4
Cutting hole in R.C.C floors, roofs
30
-
186.4
Cutting grooves in pucca floors and walls
45
-
205.44
Bib cock
5
-
1631.5
Long body Bib Cock
2
-
1934.5
Angular Stop cock
10
-
913.8
Pillar cock
3
-
1934.5
25mm dia Brass / Gun meta ball Valve
2
-
1006
40mm dia Brass / Gun meta ball Valve
1
-
1309
15mm dia PVC connection pipe 450 mm long
10
-
252.8
Waste Pipe
10
-
75.8
Stainless steel jalli (grating)
10
-
172.95
Health Faucet
3
-
2009
1000 litre capacity water storage tanks
1
-
13948.6
110mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme)
30
-
287.2
110mm U-PVC door Tee
6
-
222.27
110mm U-PVC offset
6
-
105
110mm U-PVC door bend
6
-
162
110mm U-PVC plain shoe bend
6
-
147
110mm U-PVC vent cowl
3
-
40
110mm P-trap
7
-
299.7
110mm U-PVC plain bend
8
-
147
10 liters capacity low level flushing cistern
3
-
1600.3
Water Closet (European type W.C. pan)
3
-
7815
Wash basins
3
-
1826.1
Sink
1
-
2240.3
Mirror
3
-
777.2
Glass-shelf
3
-
1534
Towel Rail
4
-
1018.5
Soap case
3
-
765.9
Urinal
2
-
2024.4
Urinal Partition
1
-
2842.5
Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.
1
-
1406.2
Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in CM (1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in (1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxes etc. all complete as per aproved drawing , specification and direction of Engineer-in-charge.
1
-
8858.1
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge.
10
-
287.2
160 mm dia U-PVC pipes Class-3 (0.60 mpa)
10
-
489.2
Supplying all materials, labour, T&P and constructing Man hole chamber of the following size with cement concrete (1:3:6) using 40 mm size HG metal on bed , !st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4) mix using 12 mm size H.G chips with RCC man hole cover , earth work in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all completed as per approved drawing, specification and direction of Engineer-in-charge.
1
-
16994.55
Supplying all materials,labour T&P and providing fitting submersible pump with squarrel cage inspection type submerssible type submersible electric motor to run on 3 phase/1 phase line voltage rangingfrom 320 volt to 450 volt conforming to IS :8034/89
1
-
14550
Control Pannel.
1
-
5000
2.5 Sq mm cable.
28
-
152
40mm dia steel short piece.
2
-
230
Steel rope wit cover.
18
-
45
Well Cap.
1
-
202
50mm size CI bracket.
1
-
121.2
20mm dia rigid HDPE pipes.
17
-
105
Earth work up to 30 mtr.
5
-
432
Earth work 30 to 50 mtr.
8
-
590
5'' ASTM pipe SCH-80
20
-
1090
Delivery
1
-
1200
Labour charges for lowering of summerssible pumpset with pipes and cables etc with testing and commissioning at site.
1
-
15000
Earth work excavation in foundation (3.22 x 2.02 x 1.9=12.36 cum)
12.36
-
207.9
Sand filling 3.22x 2.02x0.05=0.33cum
0.33
-
275.17
Cement Concrete(1:4:8) 3.22x2.02x0.1=0.65 cum
0.65
-
4487.95
Total=4.97 cum
4.97
-
4360.63
Total=15.62sqm
15.62
-
126.53
Cement Punning,15.62 sqm
15.62
-
160.03
Cement concrete(1:2:4),2.3x1.1=2.53 Sqm in flooring
2.53
-
6218.65
Total=0.448cum
0.45
-
4574.63
Reinforcement=0.448x0.88qntl/cum=0.39 Qntl
0.39
-
7992.67
Total=2.53+0.88=3.41sqm
3.41
-
437.06
M.S Steps,6 nos
6
-
250
Filling in foundation with excavated material,12.36-0.65-4.97-4.55=2.19cum
2.19
-
212.9
C.I Man Hole cover of 450mm dia. Over septic tank
1
-
4500
Ventilating pipe with cowl,Sepreme make (Single socket,1.8m+vent cowl)=266.5+24.3=290.80+4% vat of 290.80=302.31
1
-
302.31
Earth excavation 3.14x2x2x2.5/4=7.85cum
7.85
-
207.9
Sand filling 3.14x 1.45x0.45x0.05=0.102cum
0.1
-
275.17
P.C.C(1:4:8) , 3.14x1.45x0.45x0.1=0.205cum
0.21
-
4487.95
Total=3.4 cum
3.4
-
4360.63
12mm C.P in C.M(1:6),3.14x1.1x0.47=1.62 sqm
1.62
-
126.53
Cement punning,same as C.P=1.62sqm
1.62
-
160.03
Brick Khoa 3.14x1.1x1.8=6.22sqm
6.22
-
268.3
R.C.C slab cover of M-20,3.14x1.6x1.6x0.1/4=0.201cum
0.2
-
4574.63
Reinforcement,0.201cum x 0.6 qntl/cum=0.12qntl
0.12
-
7992.67
Earthwork in excavation of foundation trenches in All kinds of soil including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge.
61.6
-
207.9
Large Animal Treatment Shed
18.36
-
207.9
Driving & Errecting 375 mm dia Double under reamed Pile foundation of length 6.0 mtr Long with RCC M-25 using 12 mm black hard granite (crusher broken) stone chips including cost of boreholes, Casting & bentonite power, all material, labour, T&P but excluding cost of steel reinforcement and labour chrages for cutting, bending and binding of steel. etc. complete as per direction of Engineer-in-charge.
72
-
8792.87
Large Animal Treatment Shed
16
-
8792.87
Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge.
41.27
-
140
Large Animal Treatment Shed
12.3
-
140
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only).
86.95
-
294.4
Large Animal Treatment Shed
30.69
-
294.4
Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
168
-
160
Large Animal Treatment Shed
45
-
160
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland slag cement (PSC) with 40 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge.
7.57
-
4865.36
Large Animal Treatment Shed
2.46
-
4865.36
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland Slag Cement (PSC) with 12mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
16.8
-
5503.56
Large Animal Treatment Shed
3.5
-
5503.56
First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix (1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
21.94
-
4322.31
Large Animal Treatment Shed
9.26
-
4322.31
First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
52.08
-
4360.63
First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:4) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super structure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
1.95
-
4577.49
Providing, lifting, hoisting and laying Reinforced cement concrete of M-250 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
83.82
-
5453.75
Large Animal Treatment Shed
19.85
-
5453.75
Providing strong, rigid, leveled and plumbed centering and shuttering to required shape and size for all kinds of R.C.C. works in the items mentioned below with wooden centering materials with all necessary bracing, ties and supports with level centering covered with bituminous paper including provision of necessary holes and pockets, fan hooks or boxes, switch and board insert plates, clamps and extension bars etc. as per the direction of the Engineer-in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete.
54
-
106.7
Large Animal Treatment Shed
4.5
-
106.7
Main Building
15.12
-
741.49
Large Animal Treatment Shed
0.3
-
741.49
Main Building
4.34
-
106.7
Large Animal Treatment Shed
4.99
-
106.7
Main Building
5.57
-
741.49
Large Animal Treatment Shed
1.5
-
741.49
Main Building
2.51
-
271.68
Main Building
13.26
-
437.06
Main Building
146.61
-
741.49
Large Animal Treatment Shed
3.04
-
741.49
Main Building
168
-
437.06
Large Animal Treatment Shed
5.53
-
437.06
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer-In-Charge.
110.44
-
7992.67
Large Animal Treatment Shed
25.8
-
7992.67
Providing 12mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge.
181.85
-
137.77
Large Animal Treatment Shed
26
-
137.77
Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge.
334.28
-
196.72
Large Animal Treatment Shed
26
-
196.72
Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning closed deep chipping with slurry treatment and finished smooth to all R.C.C surface including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge.
192.03
-
154.84
Large Animal Treatment Shed
55.25
-
154.84
Providing and laying Vitrified floor tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.
154.28
-
940.23
Providing and laying Vitrified skirting tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 12 mm thick cement mortar 1:3 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of EIC at all floors and all heights.
21.99
-
1033.57
Providing and fixing 18mm thick mirror polished granite stone slab, machine cut stone (sample of granite should be approved by EIC) for kitchen platforms, vanity counters, facias and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge, making gas pipe hole etc. laid over 25mm thick bed of cement mortar 1:1 (1 cement: 1 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. In all floors and all heights.
17.11
-
2048.2
Providing and laying Matte Finish Vitrified floor tiles 300x300 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 25 mm thick cement mortar 1:1 (1cement:1coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.
9.58
-
829.57
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) minimum thickness 5mm of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make in all colours, shades except burgundy, bottle green, black of size 300x200 in skirting and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per direction of Engineer-In-Charge. In all floors and all heights.
43.76
-
776.56
Providing and fixing 16mm thick Kota stone flooring/skirting (sample of Kota stone should be approved by Engineer-In-Charge) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights.
35
-
921
Providing and fixing seasoned sal wood work in frames at any locations including doors, windows,cupboard, clerestory and other frames fixing in position including cost of hinges, M.S. flat (30mm x 6mm) hold fasts lugs or dash fasteners of required dia and length as per drawing/specification, at all floors and all heights.
0.4
-
51799.9
Providing, fitting and fixing of approved make 35mm thick (laminate finished thickness of the door) factory made flush doors of the followings size finished with 1mm thk. laminate of approved colour & shade to both side fixed to the teak wood bidding, complete in all respect bidding/lipping as per drawing/design. The door will be provided with all necessary fittings & fixtures, i.e. Baan Code-LKYPDC527), 125x75x3mm (code no-7912) SS201 hinges, etc. of approved make with all materials, labour, T&P, taxes etc. as per direction of Architect/Engineer-in-Charge.
19.85
-
4877
Supplying fitting, fixing Fatory made single leaf rigid FRP sandwich composite Door Frame & shutter (allternatly GRP) of 32 mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised isopathalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) mpregnate with orthopthalic polysterskin. The thickness of the skins shall not be less than 1.5 mm Expanded polystyone(EPS) structural foam panel of 29 mm thickness and a density of 20 kg/cu.mtr shall be used as core material. Wooded reinforcement made of seaoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinfocements for fitting the metal fittings such as tower bolt, aldrop. hanles, etc. shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material. The material and process for manufacturing the door shutters shall be conform to RV- TIFAC composite design Center's standards and specifications and the door shutters tested in conforming to IS: 4020-1998. The finish door shutter will be plain colour as per specification and diection of Engineer-In-Charge.
4.73
-
3500
Supplying, fitting, fixing up window (sliding type) made up Black Powder Coated aluminum Section 151-154, 151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick Reflective glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-In-charge. A) Powder coated aluminium approved colour (minimum thickness of powder coating 50 micron)
25.38
-
5776.2
Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (All steel sections contractor's own supply).
634.5
-
68.73
Providing and fixing Steel work welded in built up section/framed (including M.S. angle,plate, sq.bar,flat,m.s.tubular section, Heavy type hinges) work incuding cutting,hoisting,fixing in position and applying apriming coat of approved steel primer, two or more coats of synthetic enamel paint with approved make and brand in grating,frames,guard bar,ladder,railings for balconies and straircase, brackets, gates and similar works as per direction of Engineer-In-Charge.(All structural steel contractor's own supply).
113.4
-
68.73
Providing & Applying priming coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
708.15
-
58.53
Large Animal Treatment Shed
107.25
-
58.53
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall n external surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
181.85
-
85.04
Large Animal Treatment Shed
26
-
85.04
Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-Charge at all elevations including all material labour complete.
181.85
-
72.35
Large Animal Treatment Shed
107.25
-
72.35
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall on interior surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
526.31
-
85.51
Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. including interior wall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge.
526.31
-
75
Providing & Applying priming coat with ready mixed pink or gray primer of approved brand and manufacture on wood/Ply work (hard and soft wood)as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
12.92
-
58.53
Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour complete.
49.15
-
69.44
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
36.61
-
333.2
Providing and fixing Wall panelling/Partition made out of 12 mm ply,1 mm thick laminate ( over partition/ wall panelling for design ) complete with necessary Hardwood etc. as per the detail design including the cost of all materials, labour, overheads and T & P etc. complete .as per the direction of the Engineer in charge.
30.24
-
9619
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well ramed, consolidated and grouted with fine sand and finishing the top smooth including shuttering at the edges, excavation and disposing of surplus earth with a lead of 100m.
35.16
-
543.48
Large Animal Treatment Shed
15.6
-
543.48
Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor.
168
-
299.27
Large Animal Treatment Shed
55.25
-
299.27
Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type Modular switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL) (Make of Modular Box-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) Group-C .
20
-
1033
Ex.fan point controlled by one 6A switch
3
-
1033
Call bell point controlled by one 6A switch
1
-
1033
Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)
13
-
464
Recessed wiring to ceiling fan point including modular Stepped type regulator with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)
9
-
1538
Supply & fixing of 5 / 6 amp socket outlet on existing switch board with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
5
-
535
Supply, fixing with recessed wiring to 5 / 6 amp socket outlet on separate board 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.
8
-
716
Supply & fixing of 6 pin 16 amp socket outlet with 16Amp Switch, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
3
-
672
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
(For subsequent point of group control )
30
-
132
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (From BDB to Switch Board & 16A socket points )
150
-
146
Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(For BDB-L's )
20
-
206
Recessed wiring to submain in 4 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (For BDB-P's)
30
-
315
Supply, fixing of indoor type 1 No tamper proof 3 phase 4 wire KWH meter box with provision of 1no 5-30A Digital KWH meter in tamper-proof enclosure with locking & sealing arrangement and viewing window as approved by Supply authority
1
-
7389
Supplying and fixing of 1 No ICTP box with 3no. 63A, 440V kit kat fuse in Metallic enclosure with locking arrangement as approved by Supply authority
1
-
2956
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Legrand/Hager/Siemens/Schneider make, or any other equivalent of reputed make ISI marked as approved.
12
-
132
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted following sizes TPN , MCB DB suitable for 415 V, 3phase, 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.(But without MCB/ RCCB/ ISOLATOR) (Legrand/L&T/ Schneider) .
1
-
2179
Supplying and fixing 25-63 Amps rating, FP, 415 volts, RCCB,100mA (L&T / Legrand/ Siemens /Schneider) make or any other reputed equivalent catagories make ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
-
2152
Supply of material , laying & termination of 2Cx6sqmm weather proof PVC insulated PVC sheathed aluminium Conductor unarmoured Service Connection wire from the nearest LTOH line support upto the tamper proof KWH meter boards alongwith 10 SWG G.I support wire etc. completea as required and as per direction of Engineer-in-charge.
50
-
167
Supply & fixing of 1.5.mtr long G.I bend pipe made out of 25 mm dia, medium duty G.I Pipe to be fixed on the wall ffor receiving Service Connection wire upto the meter board as per the approval of local supply authority.
1
-
476
Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.(Make-Philips/ Bajaj/ Havells/ Crompton)
6
-
88
1x20W LED TL fitting with all connections similar to Jaquar lighting item No LGLZ01X020XN or equivalent
23
-
733
1x15W LED Surface fitting with all connections similar to Jaquar lighting item No LZET03R015XC or equivalent
4
-
2350
Supply, fixing & termination of Outdoor Street Light LED Luminaire with 45w LED Lamp ( with external SPD 10kV) similar to Jaquar Item No LSTR01S045XC or equivalent to / Philips / Crompton / Wipro Make complete and interconnections with 3Cx1.5sqmm FRLS PVC insulated cable.
1
-
6648
Supply, Installation, Testing and Commissioning of BEE 5 star rated ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
8
-
2601
Supply, Installation, Testing and Commissioning of BEE 5 star rated ceiling fan 1400mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
1
-
2802
Supply, Installation, testing and commissioning of exhaust fan of 225 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
3
-
2548
Providing and fixing extra down rod of 50 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required . ( more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored
1
-
59
Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required.
1
-
179
Numbering ceiling fan / exhaust fan / fluorescent fittings as required
46
-
25
Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
1
-
394
Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.
25
-
45
Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
25
-
100
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
( Tel junction Box)
1
-
182
Supplying & Commissioning of Telephone Hand Set.
1
-
736
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
2
-
5704
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
30
-
474
Supplying and laying 25 mm x 5 mm CU earth strip ISI marked on surface or in recess for connection etc as required.
20
-
534
Supply of material & laying under ground/ floor/ wall including making end termination and testing of following size of Cu/G.I. wire for loop earthing of equipments, switch boards & panels as required comlete as per direction of Engineer-in-charge.
15
-
91
Pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all complete as per specification
18.9
-
165
20 mm Pipe
35.3
-
207.2
25 mm Pipe
28.2
-
258.9
40 mm Pipe
25
-
326.7
Cutting holes through existing brick work (250 mm thick wall)
32
-
53.4
Cutting hole in R.C.C floors, roofs
30
-
186.4
Cutting grooves in pucca floors and walls
45
-
205.44
Bib cock
5
-
1631.5
Long body Bib Cock
2
-
1934.5
Angular Stop cock
10
-
913.8
Pillar cock
3
-
1934.5
25mm dia Brass / Gun meta ball Valve
2
-
1006
40mm dia Brass / Gun meta ball Valve
1
-
1309
15mm dia PVC connection pipe 450 mm long
10
-
252.8
Waste Pipe
10
-
75.8
Stainless steel jalli (grating)
10
-
172.95
Health Faucet
3
-
2009
1000 litre capacity water storage tanks
1
-
13948.6
110mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme)
30
-
287.2
110mm U-PVC door Tee
6
-
222.27
110mm U-PVC offset
6
-
105
110mm U-PVC door bend
6
-
162
110mm U-PVC plain shoe bend
6
-
147
110mm U-PVC vent cowl
3
-
40
110mm P-trap
7
-
299.7
110mm U-PVC plain bend
8
-
147
10 liters capacity low level flushing cistern
3
-
1600.3
Water Closet (European type W.C. pan)
3
-
7815
Wash basins
3
-
1826.1
Sink
1
-
2240.3
Mirror
3
-
777.2
Glass-shelf
3
-
1534
Towel Rail
4
-
1018.5
Soap case
3
-
765.9
Urinal
2
-
2024.4
Urinal Partition
1
-
2842.5
Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.
1
-
1406.2
Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in CM (1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in (1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxes etc. all complete as per aproved drawing , specification and direction of Engineer-in-charge.
1
-
8858.1
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge.
10
-
287.2
160 mm dia U-PVC pipes Class-3 (0.60 mpa)
10
-
489.2
Supplying all materials, labour, T&P and constructing Man hole chamber of the following size with cement concrete (1:3:6) using 40 mm size HG metal on bed , !st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4) mix using 12 mm size H.G chips with RCC man hole cover , earth work in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all completed as per approved drawing, specification and direction of Engineer-in-charge.
1
-
16994.55
Supplying all materials,labour T&P and providing fitting submersible pump with squarrel cage inspection type submerssible type submersible electric motor to run on 3 phase/1 phase line voltage rangingfrom 320 volt to 450 volt conforming to IS :8034/89
1
-
14550
Control Pannel.
1
-
5000
2.5 Sq mm cable.
28
-
152
40mm dia steel short piece.
2
-
230
Steel rope wit cover.
18
-
45
Well Cap.
1
-
202
50mm size CI bracket.
1
-
121.2
20mm dia rigid HDPE pipes.
17
-
105
Earth work up to 30 mtr.
5
-
432
Earth work 30 to 50 mtr.
8
-
590
5'' ASTM pipe SCH-80
20
-
1090
Delivery
1
-
1200
Labour charges for lowering of summerssible pumpset with pipes and cables etc with testing and commissioning at site.
1
-
15000
Earth work excavation in foundation (3.22 x 2.02 x 1.9=12.36 cum)
12.36
-
207.9
Sand filling 3.22x 2.02x0.05=0.33cum
0.33
-
275.17
Cement Concrete(1:4:8) 3.22x2.02x0.1=0.65 cum
0.65
-
4487.95
Total=4.97 cum
4.97
-
4360.63
Total=15.62sqm
15.62
-
126.53
Cement Punning,15.62 sqm
15.62
-
160.03
Cement concrete(1:2:4),2.3x1.1=2.53 Sqm in flooring
2.53
-
6218.65
Total=0.448cum
0.45
-
4574.63
Reinforcement=0.448x0.88qntl/cum=0.39 Qntl
0.39
-
7992.67
Total=2.53+0.88=3.41sqm
3.41
-
437.06
M.S Steps,6 nos
6
-
250
Filling in foundation with excavated material,12.36-0.65-4.97-4.55=2.19cum
2.19
-
212.9
C.I Man Hole cover of 450mm dia. Over septic tank
1
-
4500
Ventilating pipe with cowl,Sepreme make (Single socket,1.8m+vent cowl)=266.5+24.3=290.80+4% vat of 290.80=302.31
1
-
302.31
Earth excavation 3.14x2x2x2.5/4=7.85cum
7.85
-
207.9
Sand filling 3.14x 1.45x0.45x0.05=0.102cum
0.1
-
275.17
P.C.C(1:4:8) , 3.14x1.45x0.45x0.1=0.205cum
0.21
-
4487.95
Total=3.4 cum
3.4
-
4360.63
12mm C.P in C.M(1:6),3.14x1.1x0.47=1.62 sqm
1.62
-
126.53
Cement punning,same as C.P=1.62sqm
1.62
-
160.03
Brick Khoa 3.14x1.1x1.8=6.22sqm
6.22
-
268.3
R.C.C slab cover of M-20,3.14x1.6x1.6x0.1/4=0.201cum
0.2
-
4574.63
Reinforcement,0.201cum x 0.6 qntl/cum=0.12qntl
0.12
-
7992.67
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements