The Odisha Small Industries Corporation Limited Tender

Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 Grade having a crushing strength of in 15cm cubes at 28 days after mixing adn tests conducted in accordance with IS 456 and IS 516 in footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies,Column, Beam Parapets, Window sills, Lofts, Railings etc. with 12mm to 20mm size black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumb and finishing the exposed surfaces smooth including cost of scaffolding, watering and curing for the required period including cost of all materials with taxes, royalties transportation, loading and unloading, all labour, sundries, T&P including hire & running charges of concrete mixer and vibrator etc complete as per the direction of the Engineer-in-charge but excluding the cost of materials and labour for reinforcement bars , centering and shuttering for the work.

Providing & fixing TOR Fe-500 reinforcement bars for RCC work of required diameter of approved quality with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of M.S. Rods or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of E-I-C. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)

Providing strong, rigid, leveled and plumbed centering and shuttering to required shape and size for all kinds of R.C.C. works in the items mentioned below with wooden centering materials with all necessary bracing, ties and supports with level centering covered with bituminous paper including provision of necessary holes and pockets, fan hooks or boxes, switch and board insert plates, clamps and extension bars etc. as per the direction of the Engineer-in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete.

Column

Beam 1

Beam 2

Brick work with Fly Ash bricks having crushing strength 75 Kg/sqm with dimensional tolerance 2% in cement mortar 1:6 in foundation and plinth

Brick work with Fly Ash bricks having crushing strength 75 Kg/sqm with dimensional tolerance 2% in cement mortar 1:6 in super structure in ground floor

Providing 16mm thick cement plaster to the inside surface of masonary wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plastered surface smooth using wooden floats only to proper plumbs and level as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge

Preparing surface and painting with weather coat paint of approved make, shade and quality in all heights of walls, ceiling, sun sheds fins etc. incl. providing scaffolding, cleaning, curing and supply of all materials and labour complete.

Supplying, fitting and fixing of powder coated M.S. window grill made out of M.S. square bar / M.S. flats / M.S. angles as per approved drawing and design, cutting to required size and welding properly, finished smooth and sand papering, including cost, conveyance, taxes of all materials, required screws, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge in all floors.

Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour, T & P completed as directed by the Engineer-in-charge.

Single under reamed pile foundation with RCC M20 using 12mm size black hard granite (Crusher broken) stone chips including cost of boring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel.

Painting two coats with synthetic enamel paint of approved quality and approved shade confirming to ISI on steel/wood work to give an even shade over a coat of primer of approved quality and shade including sand papering and making the surface smooth in all floors at all heights including cost, conveyance, loading, unloading, taxes of all materials, labour, sundries, T& P scaffolding required for the work and complete in all respect as per specifications and directions of Engineer-in-charge.