The Odisha Small Industries Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 2,03,535Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_OSIC_90128_2Bid Award Id
ViewTender No
OSIC/Constn./2023-2024/04Tender Authority
The Odisha Small Industries Corporation Limited ViewPurchaser Address
-Website
http://http://www.osicltd.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing anti-termite treatment using approved quality of chemical emulsion, spraying the mixture uniformly by sprayer as preconstructional anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, top surface
of plinth filling, junction of walls & floors along with external perimeter of the building, expansion joints, surrounding the pipes
and conduits etc. complete at the rate as directed by the manufacturer confirming to IS:6313 (Part-II) and as per direction of
Engineer-in-charge including cost of all materials, labour, taxes, sundries, T&P etc. complete. (The payments shall be made on the basis of actual plinth area of the building at Ground Floor & vertical faces will not be measured for payment.) Note:- The Contractor shall have to furnish 10years Guarantee to maintain the anti-termite treated area / structures free from termite.
557.79
76975
138
Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate 20 mm nominal size ) of approved quality from quarry mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. & including the cost of centering and shuttering all complete as per the directions of Engineer-in-charge.
83.67
425248
5082.6
Filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20 cm in depth , consolidating each deposited layers by ramming and watering, lead up to 50m and lift up to 1.5 mt etc. including cost of all labour, sundries T & P etc complete in all respect as per the direction of Engineer-In-Charge.
205.03
21036
102.6
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
50.16
219911
4384.2
RCC work M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 % ) to be mixed in concrete mixture with approved grade cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost of centering & shuttering as per direction of the Engineer in charge.Foundation and plinth
100.47
582806
5800.8
Ground Floor
33.3
193166
5800.8
Terrace Floor
3.41
20093
5892.4
Providing, fixing in position TMT Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)Foundation and plinth
110.52
1013844
9173.4
Ground Floor
43.29
397116
9173.4
Terrace Floor
4.44
40844
9199.1
Providing steel centering and shuttering(steel/ ply) to required shape and size for all kinds of R.C.C. works centering materials with all necessary bracing, ties and supports with level centering covered with 50 micron polythene sheet/bituminous paper . as per the direction of the Engineer -in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete.Footing
136.08
14832
109
Plinth Beam
256.14
27919
109
Foundation and plinth
89.1
70130
787.1
Column
218.54
172012
787.1
Roof Beam
115.41
90839
787.1
Roof Slab
83.67
38345
458.3
Lintel
25.61
7242
282.8
Column
87.48
82624
944.5
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .Ground Floor
174.87
772435
4417.2
Terrace Floor
14.63
69581
4754.8
Providing 16mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
431.36
94424
218.9
Providing 12mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
644.19
99012
153.7
Ground Floor
545.66
93307
171
Providing average 25mm thick grading Concrete with (1:2:2) using 6mm black hard granite chips using 2% water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface, plastering and finishing smooth to proper slope and gradient including cost of all materials, conveyance and sundries, T&P etc. complete as per direction of the Engineer -in-charge.
557.78
182339
326.9
2.5 cm thick A.S Flooring in C.C (1:2:4) including punning using 12 mm size C.B hard granite chips with cost of all labour & other materials etc complete.
557.78
175339
314.35
Supplying, fitting and fixing of M.S. shutter with frame with M.S. angle with welding of 25x35x6mm and shutter section of 35x35x6mm Outer frame, 30x30x5mm M.S. angle with welding of 25x6mm flat and welding of 16gauge C.R. sheet with arrangement of clamp. Fitting of 3 nos. Of 4" hinges, 1 no of 2" hinges and 300mmx16mm M.S. aldrop with 8"tower bolt including the cost of painting 2 coats over a coat of primer , conveyance, taxes of all materials, labour, T&P etc. rquired for the complete in all respect.
864
113443
131.3
Rolling Shutter made of 80x1.25mm machine rolled laths
43.2
78770
1823.4
Painting two coats with synthetic enamel paint of approved quality and approved shade confirming to ISI on steel/wood work to give an even shade over a coat of primer of approved quality and shade including sand papering and making the surface smooth in all floors at all heights including cost, conveyance, loading, unloading, taxes of all materials, labour, sundries, T& P scaffolding required for the work and complete in all respect as per specifications and directions of Engineer-in-charge.
43.2
8699
201.37
Painting two coat with weather coat paint after preparing surface and painting with Cement paint over a coat of cement wash of approved make, shade and quality in all heights of walls, ceiling, sun sheds fins etc. incl. providing scaffolding, cleaning, curing and supply of all materials and labour complete.
431.36
33973
78.76
Providing & Painting two coats with Distemper paints of approved shade make or equivalent over a coat of primer by means of roller to inside surface of new walls and ceilling, including preparation of base and finishing the surface smooth including all cost of materials, labour, scafolding, T & P etc. complete as pe the direction of E-I-C.
1189.85
258911
217.6
Making plinth protection 50mm thick cement concrete 1:3:6 over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
87.81
33210
378.21
Providing and laying 80mm thick M-30 grade factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
886.47
764608
862.53
Earth work in all kind of soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.
175.48
40167
228.9
Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of 0.3 mtr, with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. All complete as per directions of the Engineer -in-charge.
114.08
63406
555.8
Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) of approved quality from quarry mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. but excluding the cost of centering and shuttering all complete as per the directions of Engineer-in-charge.
13.48
62671
4649.2
Providing anti-termite treatment using approved quality of chemical emulsion, spraying the mixture uniformly by sprayer as preconstructional anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, top surface
of plinth filling, junction of walls & floors along with external perimeter of the building, expansion joints, surrounding the pipes
and conduits etc. complete at the rate as directed by the manufacturer confirming to IS:6313 (Part-II) and as per direction of
Engineer-in-charge including cost of all materials, labour, taxes, sundries, T&P etc. complete. (The payments shall be made on the basis of actual plinth area of the building at Ground Floor & vertical faces will not be measured for payment.) Note:- The Contractor shall have to furnish 10years Guarantee to maintain the anti-termite treated area / structures free from termite.
186.05
25674
138
Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate 20 mm nominal size ) of approved quality from quarry mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. & including the cost of centering and shuttering all complete as per the directions of Engineer-in-charge.
27.91
141842
5082.6
Filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20 cm in depth , consolidating each deposited layers by ramming and watering, lead up to 50m and lift up to 1.5 mt etc. including cost of all labour, sundries T & P etc complete in all respect as per the direction of Engineer-In-Charge.
116.99
12003
102.6
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
40.53
177691
4384.2
RCC work M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 % ) to be mixed in concrete mixture with approved grade cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost of centering & shuttering as per direction of the Engineer in charge.
61.23
355182
5800.8
Ground Floor
21.21
123034
5800.8
Terrace Floor
1.38
8131
5892.4
Providing, fixing in position TMT Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)Foundation and plinth
67.36
617920
9173.4
Ground Floor
27.58
253002
9173.4
Terrace Floor
1.8
16558
9199.1
Providing steel centering and shuttering(steel/ ply) to required shape and size for all kinds of R.C.C. works centering materials with all necessary bracing, ties and supports with level centering covered with 50 micron polythene sheet/bituminous paper . as per the direction of the Engineer -in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete.Footing
77.04
8397
109
Plinth Beam
82.35
8976
109
Foundation and plinth
42.98
33829
787.1
Column
101.39
79804
787.1
Roof Beam
68.71
54081
787.1
Roof Slab
27.91
12791
458.3
Lintel
25.61
7242
282.8
Column
52.92
49982
944.5
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
56.96
251603
4417.2
Terrace Floor
12.35
58733
4754.8
Providing 16mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
252.18
55202
218.9
Providing 12mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
347.88
53469
153.7
Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge
361.25
61773
171
Providing average 25mm thick grading Concrete with (1:2:2) using 6mm black hard granite chips using 2% water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface, plastering and finishing smooth to proper slope and gradient including cost of all materials, conveyance and sundries, T&P etc. complete as per direction of the Engineer -in-charge.
186.05
60819
326.9
2.5 cm thick A.S Flooring in C.C (1:2:4) including punning using 12 mm size C.B hard granite chips with cost of all labour & other materials etc complete.
186.05
58484
314.35
Supplying & Fixing Granite tiles 20mm thick in floors/ platform trades or steps and landing on 25 mm thick bed of Cement motar 1:1 Jointed with neat cement slury moxed with pigment to match the shades of the tiles including rubbing and polishing including cost of all meterials etc. complete.
46.51
108922
2341.8
Supplying, fitting and fixing of M.S. shutter with frame with M.S. angle with welding of 25x35x6mm and shutter section of 35x35x6mm Outer frame, 30x30x5mm M.S. angle with welding of 25x6mm flat and welding of 16gauge C.R. sheet with arrangement of clamp. Fitting of 3 nos. Of 4" hinges, 1 no of 2" hinges and 300mmx16mm M.S. aldrop with 8"tower bolt including the cost of painting 2 coats over a coat of primer , conveyance, taxes of all materials, labour, T&P etc. rquired for the complete in all respect.
432
56721
131.3
Rolling Shutter made of 80x1.25mm machine rolled laths
21.6
39385
1823.4
Painting two coats with synthetic enamel paint of approved quality and approved shade confirming to ISI on steel/wood work to give an even shade over a coat of primer of approved quality and shade including sand papering and making the surface smooth in all floors at all heights including cost, conveyance, loading, unloading, taxes of all materials, labour, sundries, T& P scaffolding required for the work and complete in all respect as per specifications and directions of Engineer-in-charge.
21.6
4349
201.37
Painting two coat with weather coat paint after preparing surface and painting with Cement paint over a coat of cement wash of approved make, shade and quality in all heights of walls, ceiling, sun sheds fins etc. incl. providing scaffolding, cleaning, curing and supply of all materials and labour complete.
252.18
19861
78.76
Providing & Painting two coats with Distemper paints of approved shade make or equivalent over a coat of primer by means of roller to inside surface of new walls and ceilling, including preparation of base and finishing the surface smooth including all cost of materials, labour, scafolding, T & P etc. complete as pe the direction of E-I-C.
709.13
154590
218
Making plinth protection 50mm thick cement concrete 1:3:6 over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
49.4
18683
378.21
Providing and laying 80mm thick M-30 grade factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
386.57
333428
862.53
Earth work in all kind of soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.
175.48
40167
228.9
Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of 0.3 mtr, with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. All complete as per directions of the Engineer -in-charge.
114.08
63406
555.8
Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) of approved quality from quarry mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. but excluding the cost of centering and shuttering all complete as per the directions of Engineer-in-charge.
13.48
62671
4649.2
Providing anti-termite treatment using approved quality of chemical emulsion, spraying the mixture uniformly by sprayer as preconstructional anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, top surface
of plinth filling, junction of walls & floors along with external perimeter of the building, expansion joints, surrounding the pipes
and conduits etc. complete at the rate as directed by the manufacturer confirming to IS:6313 (Part-II) and as per direction of
Engineer-in-charge including cost of all materials, labour, taxes, sundries, T&P etc. complete. (The payments shall be made on the basis of actual plinth area of the building at Ground Floor & vertical faces will not be measured for payment.) Note:- The Contractor shall have to furnish 10years Guarantee to maintain the anti-termite treated area / structures free from termite.
186.05
25674
138
Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate 20 mm nominal size ) of approved quality from quarry mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. & including the cost of centering and shuttering all complete as per the directions of Engineer-in-charge.
27.91
141842
5082.6
Filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20 cm in depth , consolidating each deposited layers by ramming and watering, lead up to 50m and lift up to 1.5 mt etc. including cost of all labour, sundries T & P etc complete in all respect as per the direction of Engineer-In-Charge.
116.99
12003
102.6
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
40.53
177691
4384.2
RCC work M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 % ) to be mixed in concrete mixture with approved grade cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost of centering & shuttering as per direction of the Engineer in charge.
61.23
355182
5800.8
Ground Floor
21.21
123034
5800.8
Terrace Floor
1.38
8131
5892.4
Providing, fixing in position TMT Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)Foundation and plinth
67.36
617920
9173.4
Ground Floor
27.58
253002
9173.4
Terrace Floor
1.8
16558
9199.1
Providing steel centering and shuttering(steel/ ply) to required shape and size for all kinds of R.C.C. works centering materials with all necessary bracing, ties and supports with level centering covered with 50 micron polythene sheet/bituminous paper . as per the direction of the Engineer -in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete.
77.04
8397
109
Plinth Beam
82.35
8976
109
Foundation and plinth
42.98
33829
787.1
Column
101.39
79804
787.1
Roof Beam
68.71
54081
787.1
Roof Slab
27.91
12791
458.3
Lintel
25.61
7242
282.8
Column
52.92
49982
944.5
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
56.96
251603
4417.2
Terrace Floor
12.35
58733
4754.8
Providing 16mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
252.18
55202
218.9
Providing 12mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
347.88
53469
153.7
Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge
361.25
61773
171
Providing average 25mm thick grading Concrete with (1:2:2) using 6mm black hard granite chips using 2% water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface, plastering and finishing smooth to proper slope and gradient including cost of all materials, conveyance and sundries, T&P etc. complete as per direction of the Engineer -in-charge.
186.05
60819
326.9
2.5 cm thick A.S Flooring in C.C (1:2:4) including punning using 12 mm size C.B hard granite chips with cost of all labour & other materials etc complete.
186.05
58484
314.35
Supplying & Fixing Granite tiles 20mm thick in floors/ platform trades or steps and landing on 25 mm thick bed of Cement motar 1:1 Jointed with neat cement slury moxed with pigment to match the shades of the tiles including rubbing and polishing including cost of all meterials etc. complete.
46.51
108922
2341.8
Supplying, fitting and fixing of M.S. shutter with frame with M.S. angle with welding of 25x35x6mm and shutter section of 35x35x6mm Outer frame, 30x30x5mm M.S. angle with welding of 25x6mm flat and welding of 16gauge C.R. sheet with arrangement of clamp. Fitting of 3 nos. Of 4" hinges, 1 no of 2" hinges and 300mmx16mm M.S. aldrop with 8"tower bolt including the cost of painting 2 coats over a coat of primer , conveyance, taxes of all materials, labour, T&P etc. rquired for the complete in all respect.
432
56721
131.3
Rolling Shutter made of 80x1.25mm machine rolled laths
21.6
39385
1823.4
Painting two coats with synthetic enamel paint of approved quality and approved shade confirming to ISI on steel/wood work to give an even shade over a coat of primer of approved quality and shade including sand papering and making the surface smooth in all floors at all heights including cost, conveyance, loading, unloading, taxes of all materials, labour, sundries, T& P scaffolding required for the work and complete in all respect as per specifications and directions of Engineer-in-charge.
21.6
4349
201.37
Painting two coat with weather coat paint after preparing surface and painting with Cement paint over a coat of cement wash of approved make, shade and quality in all heights of walls, ceiling, sun sheds fins etc. incl. providing scaffolding, cleaning, curing and supply of all materials and labour complete.
252.18
19861
78.76
Providing & Painting two coats with Distemper paints of approved shade make or equivalent over a coat of primer by means of roller to inside surface of new walls and ceilling, including preparation of base and finishing the surface smooth including all cost of materials, labour, scafolding, T & P etc. complete as pe the direction of E-I-C.
709.13
154590
218
Making plinth protection 50mm thick cement concrete 1:3:6 over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
49.4
18683
378.21
Providing and laying 80mm thick M-30 grade factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
386.57
333428
862.53
Earth work in all kind of soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.
156.04
35717
228.9
Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general.
5.3
104
19.7
Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of 0.3 mtr, with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. All complete as per directions of the Engineer -in-charge.
142.51
79206
555.8
Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) of approved quality from quarry mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. but excluding the cost of centering and shuttering all complete as per the directions of Engineer-in-charge.
12.55
58347
4649.2
Providing anti-termite treatment using approved quality of chemical emulsion, spraying the mixture uniformly by sprayer as preconstructional anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, top surface
of plinth filling, junction of walls & floors along with external perimeter of the building, expansion joints, surrounding the pipes
and conduits etc. complete at the rate as directed by the manufacturer confirming to IS:6313 (Part-II) and as per direction of
Engineer-in-charge including cost of all materials, labour, taxes, sundries, T&P etc. complete. (The payments shall be made on the basis of actual plinth area of the building at Ground Floor & vertical faces will not be measured for payment.) Note:- The Contractor shall have to furnish 10years Guarantee to maintain the anti-termite treated area / structures free from termite.
185.93
25658
138
Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate 20 mm nominal size ) of approved quality from quarry mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. & including the cost of centering and shuttering all complete as per the directions of Engineer-in-charge.
27.89
141749
5082.6
Filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20 cm in depth , consolidating each deposited layers by ramming and watering, lead up to 50m and lift up to 1.5 mt etc. including cost of all labour, sundries T & P etc complete in all respect as per the direction of Engineer-In-Charge.
104.03
10673
102.6
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
44.08
193255
4384.2
RCC work M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 % ) to be mixed in concrete mixture with approved grade cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost of centering & shuttering as per direction of the Engineer in charge.
42.24
245025
5800.8
Ground Floor
9.94
57659
5800.8
Providing, fixing in position TMT Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)Foundation and plinth
46.47
426287
9173.4
Ground Floor
12.93
118612
9173.4
Providing steel centering and shuttering(steel/ ply) to required shape and size for all kinds of R.C.C. works centering materials with all necessary bracing, ties and supports with level centering covered with 50 micron polythene sheet/bituminous paper . as per the direction of the Engineer -in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete.
59.04
6435
109
Plinth Beam
58.54
6380
109
Foundation and plinth
34.21
26926
787.1
Column
76.51
60221
787.1
Lintel
26.52
7499
282.8
Providing Fly ash bricks masonry work using (250mmx120mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
105.74
467074
4417.2
Providing 16mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
241.3
52820
218.9
Providing 12mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
347.72
53444
153.7
2.5 cm thick A.S Flooring in C.C (1:2:4) including punning using 12 mm size C.B hard granite chips with cost of all labour & other materials etc complete.
185.93
58447
314.35
Supplying & Fixing Granite tiles 20mm thick in floors/ platform trades or steps and landing on 25 mm thick bed of Cement motar 1:1 Jointed with neat cement slury moxed with pigment to match the shades of the tiles including rubbing and polishing including cost of all meterials etc. complete.
20.66
48378
2341.8
Supplying, fitting and fixing of M.S. shutter with frame with M.S. angle with welding of 25x35x6mm and shutter section of 35x35x6mm Outer frame, 30x30x5mm M.S. angle with welding of 25x6mm flat and welding of 16gauge C.R. sheet with arrangement of clamp. Fitting of 3 nos. Of 4" hinges, 1 no of 2" hinges and 300mmx16mm M.S. aldrop with 8"tower bolt including the cost of painting 2 coats over a coat of primer , conveyance, taxes of all materials, labour, T&P etc. rquired for the complete in all respect.
4150.6
544973
131.3
Rolling Shutter made of 80x1.25mm machine rolled laths
21.6
39385
1823.4
Providing , fitting and fixing 30mm thick flush door shutters including all fittings and fixtures etc. complete. M.S Structure for G.I.C Sheet roof work, Fitting & Fixing of 0.30mm thick G.C.I Sheet On Roof Including Drilling Holes in Windties .
185.93
112116
603
Painting two coats with synthetic enamel paint of approved quality and approved shade confirming to ISI on steel/wood work to give an even shade over a coat of primer of approved quality and shade including sand papering and making the surface smooth in all floors at all heights including cost, conveyance, loading, unloading, taxes of all materials, labour, sundries, T& P scaffolding required for the work and complete in all respect as per specifications and directions of Engineer-in-charge.
21.6
4349
201.37
Painting two coat with weather coat paint after preparing surface and painting with Cement paint over a coat of cement wash of approved make, shade and quality in all heights of walls, ceiling, sun sheds fins etc. incl. providing scaffolding, cleaning, curing and supply of all materials and labour complete.
241.3
19004
78.76
Providing & Painting two coats with Distemper panits of approved shade make or equivalent over a coat of primer by means of roller to inside surface of new walls and ceilling, including preparation of base and finishing the surface smooth including all cost of materials, labour, scafolding, T & P etc. complete as pe the direction of E-I-C.
347.72
75802
218
Making plinth protection 50mm thick cement concrete 1:3:6 over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
49.4
18683
378.21
Providing and laying 80mm thick M-30 grade factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
386.57
333428
862.53
Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. as per specification and direction of Engineer in-charge.
Make:SUPREME/ASHIRVAD/ASTRAL 20mm dia(Oriplast/Supreme/Astral)
12
2082
173.5
25mm dia(Oriplast/Supreme/Astral)
15
3423
228.2
32mm dia(Oriplast/Supreme/Astral)
12.2
3688
302.3
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR-11)conforming to IS 15778, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer- in-Charge .32mm dia
34.8
18127
520.9
25mm dia
6
2161
360.3
20mm dia
40.01
10118
252.9
15mm dia
6
1155
192.5
Providing and fixing to wall or ceiling and floor UPVC- ASTM Standard (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete.40mm dia
5
1703
340.6
32mm dia
6
1677
279.5
25mm dia
3
628
209.6
20mm dia
3
484
161.4
Supplying, fixing and testing Ball Valve UPVCSch-80 (Solvent welded with Metal ball) all material, labour, T&P & fitting, and fixing the following different water supply fittings including supply of all necessary jointing materials etc. all complete as directed by the Engineer -in - charge.
8
16791
2098.94
25mm dia
2
1584
792.27
32mm dia
3
4896
1632.09
20mm dia
2
1191
595.52
Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per specification & direction of the Engineer-in-charge.For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall
26
1445
55.6
Cutting hole in R.C.C floors and roofs upto 19 cm thick for passing G.I / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof complete as per the direction of the Engineer-in-charge.
4
766
191.5
Providing all materials labour, T&P for Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification & as per specification & direction of EIC.
4
764
191.2
Providing all materials, labour,T&P ,fittings and fixing of different water supply (CP on Brass) fitting (Quarter Turn or as specified) as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in-charge.15mm dia Angle Stop cock
1
921
921.4
Fixing 15mm dia pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of the following nominal bore as per specification
2
1802
901
15mm dia c.p.long body bib cock
5
4895
979
15mm dia CP flange
9
833
92.6
15mm dia CP Bib Cock Elbow Action
5
4524
904.9
15 mm CP 2 in 1 Bib cock .
10
10017
1001.7
Wall Mixture Non Telephonic Type
5
11016
2203.2
Providing all materials, labour, T&P forFixing of Brass Ball Valve (Horizontal plunger type) conforming to IS 1703-1977 as per specification all complete as per specification and direction of Engineer-in-charge..
4
2784
696
32mm dia Brass ball valve
4
4898
1224.5
40mm dia Brass ball valve
4
5951
1487.8
15mm dia PVC connecion pipe 450mm long
4
413
103.4
15mmx25mm C.P. Extension piece
4
644
161.2
Concealed Brass CP stop cock regular body suitable for 20mm pipeline with spindle extension & plastic protection cap & Exposed Part Kit of Concealed Stop cock & Flush cock with fitting sleeve,operating Lever & adjustable Wall flange with seal.
4
4468
1117.1
Supplying all materials,labour, T&P and fixing CP Health Foucet with 1.0 mtr PVC Tube
6
4918
819.8
Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge.1500 litre capacity water storage tanks
2
39764
19882.4
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia u-pvc SWR pipe (Oriplast/Supreme/Astral)
45
16695
371
110mm dia u-pvc offset (Oriplast/Supreme/Astral)
4
1731
432.8
110mm dia u-pvc door bend (Oriplast/Supreme/Astral)
1
251
251
110mm dia u-pvc plain shoe bend (Oriplast/Supreme/Astral)
1
285
285.3
110mm dia u-pvc vent cowl (Oriplast/Supreme/Astral)
1
62
62.5
110mm dia u-pvc p-Trap (Oriplast/Supreme/Astral)
3
1179
393.1
110mm dia u-pvc s-Trap (Oriplast/Supreme/Astral)
6
3336
556
110mm dia u-pvc plain bend (Oriplast/Supreme/Astral)
4
1004
251
Providing and fixing 40 mm dia waste Coupling (F/T) complete as per as per direction of Engineer-in-charge.
35
5056
144.47
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete as per as per direction of Engineer-in-charge. Make:HINDWARE/PARRYWARE/CERA WITH ISI MARK
9
19691
2187.9
Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers, jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification.
7
26483
3783.4
Providing all materials, labour, T&P for fixing of following sizes of Prime mirror (60x45 cm)of 6mm thick mounted on 6mm thick AC back sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C.(Alpina/Golden Fish/Belgion)
10
10279
1027.9
Supplying and fixing standard size C.P. Soap Dish holder.
15
1350
90
Supplying and fixing standard size 32 mm CP Double Coat Robe Hook.
27
29907
1107.7
Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-B) for rain water of approved make confirming to IS-13592/1992.with ISI Mark in all floor.
15.5
5750
371
Supplying all materials, labour and T&P for fixing S.W. gully trap Grade-A complete with cast iron grating,brick masonry chamber (250x250mm.) with R.C.C. cover slab as per P.H. specification and design all complete. excluding cost of gully trap and grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
4
5926
1481.61
Supplying all materials labour & T&P for constructing of brick masonry gully trap chambers earth work in excavation in all kinds of soil, 250mm thick K.B. brick work in C.M. (1:5) with K.B. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punning including cost of RCPC cover slab etc. all complete as per approved P.H.E.D. specification and direction of Engineer-in-charge. (300mm x 300mm x 300mm deep)
6
18558
3093
Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design etc all complete as per approved specification and direction of the Engineer in charge
8
59375
7421.96
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
6
1046
174.4
110mm dia u-pvc pipe alround concrete
8
4409
551.2
Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.
2
26486
13243
Supplying all materials,labour,T&P and constructing soakway pit of the following size with precast RCC rings joined loose,gravel backing in the rear of well steining,precast Rcc cover slab in cement concrete (1:2:4) using 12mm size stone aggregates fitted with iron lifting handles including cutting holes in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works,watering,curing,conveyance of all materials to worksite etc. complete as per specification and direction of the EIC.
2
27920
13960.2
Supplying all labour, tools and plants and drilling pilot bore 200 mm dia without casing pipes in all kinds of soils for the following depths excluding supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per the direction of Engineer-in-charge
25
18887
755.48
30mtr to 60mtr
10.25
8571
836.28
45mtr to above
25
13862
554.49
Lowering the following size of GI/PVC/MS housing pipes with or without slotted pipes as per the necessity from ground level upto 45.00M depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials,tools and plants etc. all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
15
3127
208.5
30.00M to 60.00M.
18
3753
208.5
Supplying all labour, tools and plant and jointing materials and lowering the pvc casing pipes, fittings and well screens in position including fitting and fixing of centraliser, cutter plug and washing the bore etc complete as per the direction of the Engineer in charge
25
40845
1633.8
Supplying all labour, tools and plant and grouting with cement slurry for sanitary sealing in the bore around the upper most 3 metres of 200 mm dia PVC casing pipe properly as per the direction of the Engineer-in-Charge.
1
790
790
Supplying all labour, tools and plant and materials for cleaning and developing the tubewell with compressor continuously washed till clean and adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour complete in all respect as per the direction of the Engineer-in-Charge.
1
4994
4994.8
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submerisble electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trail running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge
2 H.P three phase 3 stage head Horizontal Submersible Pump Set
1
21000
21000
DOL Control panel
1
3805
3805.5
32mm dia steel short piece
2
304
152.3
Well cap
1
152
152.3
50mm size CI bracket
2
182
91.36
2.50 sqmm flat cable
50
6405
128.1
Steel rope with cover
35
934
26.7
20mm dia rigid UPVC pipes
20
137
6.88
Labour charges for lowering including transportation
1
2000
2000
Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type Modular switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells) (Make of Modular Box-Great white/ Legrand / Roma/ Havells )
100
107900
1079
Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells)
16
7648
478
Supply & fixing of 5 / 6 amp socket outlet on existing switch board with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
8
4392
549
Supply & fixing of 6 pin 16 amp socket outlet with 16Amp Switch, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
22
15092
686
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
(For subsequent point of group control )
175
24325
139
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (From BDB to Switch Board & 16A socket points )
210
32130
153
Recessed wiring to submain in 4 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (For BDB-L's / BDB-P's)
80
25680
321
Supply , delivery ,Installation, testing & commissioning of L.T. indoor floor/ wall mounted type distribution boards made out of 2 mm/1.6mm thick CR sheet metal cubicle fixed on m.s. channel base, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proof ; having hinged door and compartmental arrangement for each equipment & busbar chamber on the top of the panel running horizontally; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge.
(make- L&T / Legrand / Schneider or equvalant reputed make)
1
25000
25000
Instruments: 4 Nos phase indicating lamp with control fuses for On/Off
3
120000
40000
20/32 amp SPN, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure indusrial socket ,20/32A SP MCB
6
13500
2250
20/32 amp TPN, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure indusrial socket ,20/32A TPN MCB
12
54000
4500
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted following sizes, SPN, MCB, DB siutable for, 240 V, Single phase 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below. (But without MCB/RCCB/ Isolator) (make- L&T / Legrand / Schneider or equvalant reputed make)
1
1928
1928
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted following sizes TPN , MCB DB suitable for 415 V, 3phase, 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.(But without MCB/ RCCB/ ISOLATOR) (make- L&T / Legrand / Schneider or equvalant reputed make)
3
6579
2193
Supply and fixing of 6 amp to 32 amp rating 240 V "C" series miniature circuit breaker suitable for inductive loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make- L&T / Legrand / Schneider or equvalant reputed make)
44
5940
135
Supply and fixing of following rating double pole (single pole and neutral) 240 V residual current break (RCCB) having a sensitivity current up to 300 milli ampere in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required.(make- L&T / Legrand / Schneider or equvalant reputed make)
1
1667
1667
Supplying and fixing 25-63 Amps rating, four pole, 415 volts, RCCB,100mA/300mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.(make- L&T / Legrand / Schneider or equvalant reputed make)
3
6465
2155
Supply, laying & testing of following sizes XLPE insulated, PVC sheathed, strip/ wire armoured aluminium conductor power cable of 1100 volt grade laid directly in ground/ on surface of wall/ column/ existing RCC/ stone ware/ through G.I. pipe/ hume pipe as the case may be including excavation of earth in all kinds of soil & rock, sand cushioning, protective covering, refilling the trench with sand and brick covering but excluding the cost of G. I. pipe/ hume pipe and cable end termination complete with making good the damages caused as required and as per direction of Engineer-in-charge.
200
76600
383
Supply of materials and end termination of following cables including supply of single compression brass cable glands, cable sockets etc complete as required and as per direction of Engineer-in-charge.
8
2592
324
Supply of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade Al. conductor cable of following size. direct in ground including excavation , sand cushioning protective covering and refilling the trench etc.or on surface / on existing cable tray as required.
( Polycab / Finolex / Havells / Rhino / RR Kabel )
175
28000
160
Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.
20
2200
110
Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of following sizes on LAYING OF CABLE ON SURFACE as required.
150
12300
82
Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.(Make-Philips/ Bajaj/ Havells/ Crompton)
26
81900
3150
1x45w LED Street Light"smartbright essential" fitting with all connections similar to PHILIPS lighting item No BRP031 LED45 CW MR PSU GR DX or equivalent.
17
88944
5232
1 x 80W LED Highbay fitting with all connections similar to Philips lighting item No BY325P LED100S CW PSU GR FG NB XTFCL V1 or equivalent
48
570528
11886
Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
9
25929
2881
Numbering ceiling fan / exhaust fan / fluorescent fittings as required
100
2700
27
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.( Panels- 8 + M/C - 8 )
16
92096
5756
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
150
71100
474
Supplying and laying 25 mm x 5 mm CU earth strip ISI marked on surface or in recess for connection etc as required.
120
64680
539
Supply of material & laying under ground/ floor/ wall including making end termination and testing of following size of Cu/G.I. wire for loop earthing of equipments, switch boards & panels as required comlete as per direction of Engineer-in-charge.
150
14250
95
Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required
20
50640
2532
Providing and fixing of lightning conductor finial made of 25mm dia 300 mm long, G.I tube,having single prong at top,with 85mm dia 6 mm thick G.I base plate including holes etc. complete as required
20
5360
268
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)
120
7200
60
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)
100
10000
100
Fixing of copper / G.I tape 20 mm x 3 mm thick on parapet or suface of wall for lightining conductor complete as required. ( For horizontal run)
120
4440
37
Fixing of copper / G.I tape 20 mm x 3 mm thick on parapet or suface of wall for lightining conductor complete as required. ( For vertical run)
100
7300
73
Providing and fixing of testing joint, made of 20 mm x 3 mm thick G.I. strip, 125 long with 4 nos of G.I. bolts, check nuts and spring washer etc complete as required.
20
1300
65
Providing and laying of G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required.
75
6975
93
Laying of copper / G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required.
75
1650
22
Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate.
4
14644
3661
Supply and fixing of Co2 fire extinguisher with mounting clamps with pressure test certificate .
12
71892
5991
Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room.
4
3208
802
Warning signs 415 V for Main LT panel rooms, Electrical rooms etc.
4
3808
952
Providing and fixing M.V danger board of 250 mm x 200 mm made mild steel at least 2 mm thick and vitreous enameled white on both sides and with inscription in single red colours on front side as
required.
4
500
125
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements