The Odisha Small Industries Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_OSIC_80344_4Bid Award Id
ViewTender No
OSIC/Constn./2022-2023/12Tender Authority
The Odisha Small Industries Corporation Limited ViewPurchaser Address
-Website
http://http://www.osicltd.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment). Ground Floor
145.6
-
107.33
Providing and laying plain cement concrete 1:3:6 (1 cement : 3 sand : 6 stone agregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc. complete all depth and height. Ground Floor
8.65
-
4213.6
Providing and laying plain cement concrete 1:3:6 (1 cement : 3 sand : 6 stone agregate 12 mm nominal size) as levelling course in floor and plinth etc. including tempering, curring, shuttering etc. complete all depth and height. Ground Floor
13.1
-
5286.8
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. Ground Floor
25.02
-
4136.7
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. Ground Floor
55.3
-
4169.7
Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 Grade having a crushing strength of in 15cm cubes at 28 days after mixing adn tests conducted in accordance with IS 456 and IS 516 in footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies,Column, Beam Parapets, Window sills, Lofts, Railings etc. with 12mm to 20mm size black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumb and finishing the exposed surfaces smooth including cost of scaffolding, watering and curing for the required period including cost of all materials with taxes, royalties transportation, loading and unloading, all labour, sundries, T&P including hire & running charges of concrete mixer and vibrator etc complete as per the direction of the Engineer-in-charge but excluding the cost of materials and labour for reinforcement bars , centering and shuttering for the work. Ground Floor
76.01
-
4953.5
Providing strong, rigid, leveled and plumbed centering and shuttering to required shape and size for all kinds of R.C.C. works in the items mentioned below with wooden centering materials with all necessary bracing, ties and supports with level centering covered with bituminous paper including provision of necessary holes and pockets, fan hooks or boxes, switch and board insert plates, clamps and extension bars etc. as per the direction of the Engineer-in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete. a) Footing & Plinth Beam
107.49
-
104.4
b) Column & Beam
190.5
-
713
c) Lintel
19.06
-
252.2
d) Roof Slab
197.66
-
410.6
Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding ( Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-in-charge Cold Twisted bars, Thermo-Mechanically-treated bars.Ground Floor
93.02
-
9226
12mm cement plaster on external RCC/brick surfaces in cement plaster 1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.Ground Floor
265.34
-
138.8
16mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.Ground Floor
269.79
-
197.7
6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1 cement : 4 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.Ground Floor
193.83
-
155.5
Providing and laying Vitrified floor tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.Ground Floor
115.9
-
1120
Providing and laying Vitrified Skirting tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 12 mm thick cement mortar 1:3 (1cement: 3coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.Ground Floor
12.79
-
1276.8
Providing and fixing 20mm thick Granite stone flooring (sample of Granite stone should be approved by Engineer-In-Charge) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. Ground Floor
13.68
-
2194
Providing and laying Ceramic floor tiles 300x300 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 25 mm thick cement mortar 1:1 (1cement:1coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.Ground Floor
6
-
647.6
Providing and fixing 1st quality Ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) minimum thickness 5mm of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make in all colours, shades except burgundy, bottle green, black of size 300x200 in skirting and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per direction of Engineer-In-Charge. In all floors and all heights. Ground Floor
44.05
-
703.6
Providing, fixing, fitting of fully glazed door made out of Black powder coated aluminium frame using door section of 19501 of Jindal make with top, bottom and vertical member, Glazing clip no19352 and jointing angles and 12mm thk toughened clear glass with itching as per drawing/design with all necessary hardware including long S.S handle to both side, including all cost of labour, T&P, hire charges of drilling mechine, labour charges etc. complete as per direction of Engineer-In-Charge.Ground Floor
19.53
-
7605.2
Supplying fitting and fixing Fibre Reinforced Polymer FRP composite door shutter with hinge as per approved section with glass fibre reinforced plastic moulded skins and a special sandwiched core, so as to impart monolithic composite structure as per approved technology (DST) to satisfy IS: 14856 door testing performance criteria including all complete, as approved by EIC. Ground Floor
1.58
-
3535.4
Supplying, fitting, fixing up window (sliding type) made up Black Powder Coated aluminum Section 151-154, 151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick Reflective/Black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-In-charge.Ground Floor
27.09
-
5965.7
Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (All steel sections contractor's own supply).Ground Floor
677.25
-
72.45
Preparing surface and painting with weather coat paint of approved make, shade and quality in all heights of walls, ceiling, sun sheds fins etc. incl. providing scaffolding, cleaning, curing and supply of all materials and labour complete.Ground Floor
265.34
-
132
Providing & Painting two coats with Plastic Emulsion panits of approved shade make or equivalent over a coat of primer and pop by means of roller to inside surface of new walls and ceilling, including preparation of base and finishing the surface smooth including all cost ofmaterials, labour, scafolding, T & P etc. complete as pe the direction of E-I-C. Ground Floor
463.62
-
252
Painting two coats with synthetic enamel paint of approved quality and approved shade confirming to ISI on steel/wood work to give an even shade over a coat of primer of approved quality and shade including sand papering and making the surface smooth in all floors at all heights including cost, conveyance, loading, unloading, taxes of all materials, labour, sundries, T& P scaffolding required for the work and complete in all respect as per specifications and directions of Engineer-in-charge.Ground Floor
27.09
-
190.6
Providing and fixing 40mm dia stainless steel Pipe 2mm thick handrail over stainless steel structural balustrade already fixed in position as per drawing including cost of all materials, fabricating, labour, transportation, taxes, complete as per the direction of the Engineer-in-charge.
7.7
-
3464.9
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well ramed, consolidated and grouted with fine sand and finishing the top smooth including shuttering at the edges, excavation and disposing of surplus earth with a lead of 100m. Ground Floor
33.54
-
379.8
Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor. Second Floor
149.6
-
360.4
Providing and fixing Wall panelling/Partition made out of 12 mm ply,1 mm thick laminate ( over partition/ wall panelling for design ) complete with necessary Hardwood etc. as per the detail design including the cost of all materials, labour, overheads and T & P etc. complete .as per the direction of the Engineer in charge.
33.54
-
9619
Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type Modular switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL) (Make of Modular Box-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) Group-C .Single light point controlled by one 6A switch or first light point or group control
14
-
1033
Ex.fan point controlled by one 6A switch
1
-
1033
Call bell point controlled by one 6A switch
1
-
1033
Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)
4
-
464
Recessed wiring to ceiling fan point including modular Stepped type regulator with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)
7
-
1538
Supply & fixing of 5 / 6 amp socket outlet on existing switch board with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
5
-
535
Supply, fixing with recessed wiring to 5 / 6 amp socket outlet on separate board 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.
6
-
716
Supply & fixing of 6 pin 16 amp socket outlet with 16Amp Switch, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
6
-
672
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
(For subsequent point of group control )
30
-
132
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (From BDB to Switch Board & 16A socket points )
180
-
146
Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
20
-
206
Recessed wiring to submain in 4 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
30
-
315
Supply, fixing of indoor type 1 No tamper proof 3 phase 4 wire KWH meter box with provision of 1no 5-30A Digital KWH meter in tamper-proof enclosure with locking & sealing arrangement and viewing window as approved by Supply authority
1
-
7389
Supplying and fixing of 1 No ICTP box with 3no. 63A, 440V kit kat fuse in Metallic enclosure with locking arrangement as approved by Supply authority
1
-
2956
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted following sizes TPN , MCB DB suitable for 415 V, 3phase, 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.(But without MCB/ RCCB/ ISOLATOR) (Legrand/L&T/ Schneider) .
1
-
2179
Supplying and fixing 25-63 Amps rating, FP, 415 volts, RCCB,100mA (L&T / Legrand/ Siemens /Schneider) make or any other reputed equivalent catagories make ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
-
2152
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Legrand/Hager/Siemens/Schneider make, or any other equivalent of reputed make ISI marked as approved.
12
-
132
Supply of material , laying & termination of 2Cx6sqmm weather proof PVC insulated PVC sheathed aluminium Conductor unarmoured Service Connection wire from the nearest LTOH line support upto the tamper proof KWH meter boards alongwith 10 SWG G.I support wire etc. completea as required and as per direction of Engineer-in-charge.
50
-
167
Supply & fixing of 1.5.mtr long G.I bend pipe made out of 25 mm dia, medium duty G.I Pipe to be fixed on the wall ffor receiving Service Connection wire upto the meter board as per the approval of local supply authority.
1
-
476
Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.(Make-Philips/ Bajaj/ Havells/ Crompton) 1x9 watt LED lamp of Ujalla Scheme ( Energy Efficiency Services Ltd - EESL ) on existing Angle/batten holder
5
-
88
10W LED Bulk Head fitting all connections similar to Jaquar lighting item No LBLK01X010XC or equivalent
1
-
1677
1x20W LED TL fitting with all connections similar to Jaquar lighting item No LGLZ01X020XN or equivalent
12
-
733
Supply, fixing & termination of Outdoor Street Light LED Luminaire with 45w LED Lamp ( with external SPD 10kV) similar to Jaquar Item No LSTR01S045XC or equivalent to / Philips / Crompton / Wipro Make complete and interconnections with 3Cx1.5sqmm FRLS PVC insulated cable.
1
-
6648
Supply, Installation, Testing and Commissioning of BEE 5 star rated ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
5
-
2601
Supply, Installation, Testing and Commissioning of BEE 5 star rated ceiling fan 1400mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
2
-
2802
Supply, Installation, testing and commissioning of exhaust fan of 225 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
1
-
2548
Providing and fixing extra down rod of 50 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required . ( more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored
2
-
59
Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required.
1
-
179
Numbering ceiling fan / exhaust fan / fluorescent fittings as required
27
-
25
Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
1
-
394
Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.
25
-
45
Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
25
-
100
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
( Tel junction Box)
1
-
182
Supplying & Commissioning of Telephone Hand Set.
1
-
736
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
2
-
5704
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
30
-
474
Supplying and laying 25 mm x 5 mm CU earth strip ISI marked on surface or in recess for connection etc as required.
20
-
534
Supply of material & laying under ground/ floor/ wall including making end termination and testing of following size of Cu/G.I. wire for loop earthing of equipments, switch boards & panels as required comlete as per direction of Engineer-in-charge.8SWG HDBC Wire on surface or in recess for loop earthing as required.
15
-
91
Pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all complete as per specification 15 mm Pipe
8.6
-
165
20 mm Pipe
6.3
-
207.2
25 mm Pipe
9.5
-
258.9
40 mm Pipe
8.5
-
326.7
Cutting holes through existing brick work (250 mm thick wall)
11
-
53.4
Cutting hole in R.C.C floors, roofs
10
-
186.4
Cutting grooves in pucca floors and walls
16
-
205.44
Fitting and fixing brass/CP fittings Bib cock
3
-
1631.5
Long body Bib Cock
2
-
1934.5
Angular Stop cock
6
-
913.8
Pillar cock
3
-
1934.5
25mm dia Brass / Gun meta ball Valve
2
-
1006
40mm dia Brass / Gun meta ball Valve
1
-
1309
15mm dia PVC connection pipe 450 mm long
10
-
252.8
Waste Pipe
6
-
75.8
Stainless steel jalli (grating)
4
-
172.95
Health Faucet
2
-
2009
1000 litre capacity water storage tanks
1
-
13948.6
Fitting and fixing U-PVC SWR Soil Waste Ventilating Pipes 110mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme)
30
-
287.2
110mm U-PVC door Tee
6
-
222.27
110mm U-PVC offset
6
-
105
110mm U-PVC door bend
6
-
162
110mm U-PVC plain shoe bend
6
-
147
110mm U-PVC vent cowl
2
-
40
110mm P-trap
4
-
299.7
110mm U-PVC plain bend
6
-
147
10 liters capacity low level flushing cistern
2
-
1600.3
Water Closet (European type W.C. pan)
2
-
7815
Wash basins
2
-
1826.1
Sink
1
-
2240.3
Mirror
2
-
777.2
Glass-shelf
3
-
1534
Towel Rail
3
-
1018.5
Soap case
3
-
765.9
Urinal
1
-
2024.4
Urinal Partition
1
-
2842.5
Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.
1
-
1444.9
Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in CM (1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in (1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxes etc. all complete as per aproved drawing , specification and direction of Engineer-in-charge.
1
-
9686.8
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge.
10
-
287.2
160 mm dia U-PVC pipes Class-3 (0.60 mpa)
10
-
489.2
Supplying all materials, labour, T&P and constructing Man hole chamber of the following size with cement concrete (1:3:6) using 40 mm size HG metal on bed , !st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4) mix using 12 mm size H.G chips with RCC man hole cover , earth work in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all completed as per approved drawing, specification and direction of Engineer-in-charge.
1
-
16993.2
Supplying all materials,labour T&P and providing fitting submersible pump with squarrel cage inspection type submerssible type submersible electric motor to run on 3 phase/1 phase line voltage rangingfrom 320 volt to 450 volt conforming to IS :8034/89 One no. 3 phase 3 stage head range 30 to 54 mtr. Discharge 155 to 200 LMP with outlate dia 32mm.
1
-
14550
Control Pannel.
1
-
5000
2.5 Sq mm cable.
28
-
152
40mm dia steel short piece.
2
-
230
Steel rope wit cover.
18
-
45
Well Cap.
1
-
202
50mm size CI bracket.
1
-
121.2
20mm dia rigid HDPE pipes.
17
-
105
Earth work up to 30 mtr.
5
-
432
Earth work 30 to 50 mtr.
8
-
590
5'' ASTM pipe SCH-80
20
-
1090
Delivery
1
-
1200
Delivery
1
-
15000
Earth work excavation in foundation (3.22 x 2.02 x 1.9=12.36 cum)
12.36
-
207.9
Sand filling 3.22x 2.02x0.05=0.33cum
0.33
-
276
Cement Concrete(1:4:8) 3.22x2.02x0.1=0.65 cum
0.65
-
4345.1
Baffle wall
4.97
-
4398.24
Cement Plaster 12mm thick C.P(1:6)
15.62
-
146.8
Cement Punning,15.62 sqm
15.62
-
146.8
Cement concrete(1:2:4),2.3x1.1=2.53 Sqm in flooring
2.53
-
6371.1
Total=0.448cum
0.45
-
5332.35
Reinforcement
0.39
-
9342.05
Reinforcement
3.41
-
455.5
M.S Steps,6 nos
6
-
250
Filling in foundation with excavated material,12.36-0.65-4.97-4.55=2.19cum
2.19
-
138.6
C.I Man Hole cover of 450mm dia. Over septic tank
1
-
4500
Ventilating pipe with cowl,Sepreme make (Single socket,1.8m+vent cowl)=266.5+24.3=290.80+4% vat of 290.80=302.31
1
-
302.31
Supplying all materials, labour, T&P and construction of Soak pit with 1.1m dia. Earth excavation 3.14x2x2x2.5/4=7.85cum
7.85
-
207.9
Sand filling 3.14x 1.45x0.45x0.05=0.102cum
0.1
-
276
P.C.C(1:4:8) , 3.14x1.45x0.45x0.1=0.205cum
0.21
-
4345.1
Flyash Brick masonry in C.M(1:6)
3.4
-
4398.24
12mm C.P in C.M(1:6),3.14x1.1x0.47=1.62 sqm
1.62
-
146.8
Cement punning,same as C.P=1.62sqm
1.62
-
146.8
Brick Khoa 3.14x1.1x1.8=6.22sqm
6.22
-
298.5
R.C.C slab cover of M-20,3.14x1.6x1.6x0.1/4=0.201cum
0.2
-
5332.35
Reinforcement,0.201cum x 0.6 qntl/cum=0.12qntl
0.12
-
9342.05
Earth work in excavation of foundation in all kinds of soil within initial lead and lift including rough dressing and breaking clods etc. complete as per the direction of the engineer in charge.
181.6
-
207.9
Large Animal Treatment Shed
26.44
-
207.9
Sand filling in foundation and plinth with well waterd and rammed etc. complete.
114.53
-
276
Large Animal Treatment Shed
23.47
-
276
Foundation Filling with excavated material from the foundation trenches as per the direction of the engineer in charge.
121.67
-
104.88
Large Animal Treatment Shed
17.71
-
104.88
Cement concrete in cm(1:4:8) using 4cm size H.G metal with all cost, conveyancy etc. complete as per the direction of the engineer in charge.
34.65
-
4345.1
Large Animal Treatment Shed
8.64
-
4345.1
Fly ash brick masonry in cm (1:6) in foundation and plinth with all cost, Carriage, Royality etc. complete as per the direction of the engineer in charge.
50.07
-
4364.9
Large Animal Treatment Shed
7.52
-
4364.9
Fly ash brick masonry in cm(1:6) in Super Structure with all cost, Carriage, Royality etc. complete.
63.66
-
4398.24
Fly ash brick masonry in cm (1:4) in super structure with all cost, Carriage, Royality etc. complete.Main Building
1.3
-
4671.26
R.C.C M-20 Grade with 20mm and down grade block hard granite (crusher broken ) stone chips including hoisting and laying including cost, conveyance, royality, taxes etc. complete as per the direction of the engineer in charge. Main Building
25.6
-
6061.06
Large Animal Treatment Shed
2.26
-
6061.06
Main Building
1.01
-
6061.06
Large Animal Treatment Shed
0.3
-
6061.06
Main Building
10.5
-
6061.06
Large Animal Treatment Shed
2.44
-
6061.06
Main Building
3.88
-
9325.33
Main Building
1.51
-
5833.39
Main Building
18.17
-
12926.43
Large Animal Treatment Shed
4.09
-
12926.43
Main Building
20.81
-
9887.34
Large Animal Treatment Shed
7.25
-
9887.34
Providing HYSD Bar reinforcement for R.C.C work including straighting, cutting, bending & binding, welding, tying the grills,laying and placeing the proper position as per approved design and drawing including cost,conveyancye of 18 to 20 gauge binding wire cost and conveyance HYSD bars complete in all respect as per specification for road and bridge and direction of engineers in charge.
99.19
-
9342.05
Large Animal Treatment Shed
19.9
-
9342.05
16 mm thick C.P in cm (1:6) over Brick work with all cost, carriage,Royality etc. complete.
319.58
-
207.5
Large Animal Treatment Shed
16.2
-
207.5
12mm thick C.P in cm (1:6) over Brick work with all cost, carriage,Royality etc. complete.
480.66
-
146.8
Large Animal Treatment Shed
19.5
-
146.8
6mm thick C.P in cm (1:4) over Brick work with all cost, carriage,Royality etc. complete.
162.99
-
136
Large Animal Treatment Shed
89.01
-
136
Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlins, frames of doors and windows, ventilators and beams including the labour for fixing chaukath.
0.4
-
55643.07
32 mm thick flush door shutter made out of 32 mm BWR block board and covering with 1 mm thick sunmica to bothsides pasted with adhesive including fixing of fixtures like Godrej make mortis lock having model No 9168, Godrej make door closure having model no 8340, 100 mm aluminium heavy hinges including cost, conveyance, taxes of all materials etc. complete as directed by the Engineering in Charge.
19.85
-
6545.36
Supplying, fitting fixing of window(sliding type) made of Aluminium section 9778 as window frame section no 4095, 4096 and 9777, 3994 as shutter frame with 5 mm thich black glass as channel fitted with rubber banding including locking arrangement including all fittings including cost of material, labour, taxes, T & P etc. but excluding cost of glass complete as per direction of engineer in charge.
25.38
-
3503.52
Supplying, fitting and fixing of FRP door frame of size 75 mm X 100 mm including drilling holes in masonry with cost of all maerials, rawl plug, screws with all cost, coveyance, taxes of all materals and labour etc. complete as per direction of the engineer in charge.
14.85
-
517.13
Supplying, fitting and fixing of factory made single leaf rigid FRP compositr door shutter of 32 mm thick, laminated with to GRP skins with wood grain finish fabricated using UV stabilized isopthalic gal coat and one layer of 450 gsn E glass chopped strand mat(CSM) imprgnated with orthopathalic, polyster resin including fitting of all fixtures like hinges, tower bolt, handle, aldrop etc. with all cost, coveyance and taxes of all materials and labour etc. complete as per direction of Engineer in Charge.
4.73
-
3257.17
Fixing vitrified tiles 60 cm x 60 cm size in floors,treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including cost of tiles.
150.48
-
917.13
Fixing vitrified tiles 30 cm x 30 cm size in Floors,treads and Landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tiles.
9.58
-
1063.85
Fixing Ceramic Glazed Wall Tiles in dados,skirting and in rises of step on 25mm thick bed of cement mortar (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tiles.
40.89
-
1122.4
Fixing vitrified tiles in dado, skirting and risers of steps on 12 mm thick CP jointed with nit cement slurry etc complete in all respects.
19.16
-
941.56
Finishing wall surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scsffolding staging charges with cost of all materials ,Taxes , Labour etc complete (inside)
950.56
-
70.01
Large Animal Treatment Shed
124.71
-
70.01
Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. including interior wall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge.
713.31
-
268.5
Large Animal Treatment Shed
124.71
-
268.5
Providing weather coat over a coat of primer to surface of the structure or as per direction of the Engineer-in-charge.
237.25
-
138.93
Large Animal Treatment Shed
105.21
-
138.93
25mm thick grading concrete (1:2:2) on roof slab with 6mm size granite chips on new work including cost, conveyance, royality etc. complete.
166.49
-
315.9
Large Animal Treatment Shed
57.96
-
315.9
Providing and fixing MS Grill of required pattern for windows with MS Flats, squares or round bars etc. including cost of everything as directed by Engineer in Charge.
68.53
-
74.16
Painting two coats with synthetic enamel paint ove a coat primng one coat over grill & Bwood work.
29.22
-
137.59
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well ramed, consolidated and grouted with fine sand and finishing the top smooth including shuttering at the edges, excavation and disposing of surplus earth with a lead of 100m.
58.58
-
903.9
Large Animal Treatment Shed
30
-
903.9
Cement Concrete in cm (1:2:4) using 12mm size h.g.c.b chips with all cost, conveyancy etc. complete.Large Animal Treatment Shed
2.7
-
6371.1
Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
180.61
-
107.33
Large Animal Treatment Shed
45
-
107.33
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
3.5
-
3499.55
Providing and fixing Wall panelling/Partition made out of 12 mm ply,1 mm thick laminate ( over partition/ wall panelling for design ) complete with necessary Hardwood etc. as per the detail design including the cost of all materials, labour, overheads and T & P etc. complete .as per the direction of the Engineer in charge. Main Building
30.24
-
9619
Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type Modular switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL) (Make of Modular Box-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) Group-C .
20
-
1033
Ex.fan point controlled by one 6A switch
3
-
1033
Call bell point controlled by one 6A switch
1
-
1033
Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)
13
-
464
Recessed wiring to ceiling fan point including modular Stepped type regulator with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)
9
-
1538
Supply & fixing of 5 / 6 amp socket outlet on existing switch board with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
5
-
535
Supply, fixing with recessed wiring to 5 / 6 amp socket outlet on separate board 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.
8
-
716
Supply & fixing of 6 pin 16 amp socket outlet with 16Amp Switch, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
3
-
672
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
(For subsequent point of group control )
30
-
132
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (From BDB to Switch Board & 16A socket points )
150
-
146
Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(For BDB-L's )
20
-
206
Recessed wiring to submain in 4 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (For BDB-P's)
30
-
315
Supply, fixing of indoor type 1 No tamper proof 3 phase 4 wire KWH meter box with provision of 1no 5-30A Digital KWH meter in tamper-proof enclosure with locking & sealing arrangement and viewing window as approved by Supply authority
1
-
7389
Supplying and fixing of 1 No ICTP box with 3no. 63A, 440V kit kat fuse in Metallic enclosure with locking arrangement as approved by Supply authority
1
-
2956
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Legrand/Hager/Siemens/Schneider make, or any other equivalent of reputed make ISI marked as approved.
12
-
132
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted following sizes TPN , MCB DB suitable for 415 V, 3phase, 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.(But without MCB/ RCCB/ ISOLATOR) (Legrand/L&T/ Schneider) .
1
-
2179
Supplying and fixing 25-63 Amps rating, FP, 415 volts, RCCB,100mA (L&T / Legrand/ Siemens /Schneider) make or any other reputed equivalent catagories make ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
-
2152
Supply of material , laying & termination of 2Cx6sqmm weather proof PVC insulated PVC sheathed aluminium Conductor unarmoured Service Connection wire from the nearest LTOH line support upto the tamper proof KWH meter boards alongwith 10 SWG G.I support wire etc. completea as required and as per direction of Engineer-in-charge.
50
-
167
Supply & fixing of 1.5.mtr long G.I bend pipe made out of 25 mm dia, medium duty G.I Pipe to be fixed on the wall ffor receiving Service Connection wire upto the meter board as per the approval of local supply authority.
1
-
476
Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.(Make-Philips/ Bajaj/ Havells/ Crompton)1x9 watt LED lamp of Ujalla Scheme ( Energy Efficiency Services Ltd - EESL ) on existing Angle/batten holder
6
-
88
1x20W LED TL fitting with all connections similar to Jaquar lighting item No LGLZ01X020XN or equivalent
23
-
733
1x15W LED Surface fitting with all connections similar to Jaquar lighting item No LZET03R015XC or equivalent
4
-
2350
Supply, fixing & termination of Outdoor Street Light LED Luminaire with 45w LED Lamp ( with external SPD 10kV) similar to Jaquar Item No LSTR01S045XC or equivalent to / Philips / Crompton / Wipro Make complete and interconnections with 3Cx1.5sqmm FRLS PVC insulated cable.
1
-
6648
Supply, Installation, Testing and Commissioning of BEE 5 star rated ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
8
-
2601
Supply, Installation, Testing and Commissioning of BEE 5 star rated ceiling fan 1400mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
1
-
2802
Supply, Installation, testing and commissioning of exhaust fan of 225 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
3
-
2548
Providing and fixing extra down rod of 50 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required . ( more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored
1
-
59
Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required.
1
-
179
Numbering ceiling fan / exhaust fan / fluorescent fittings as required
46
-
25
Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
1
-
394
Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.
25
-
45
Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required. 20mm
25
-
100
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
( Tel junction Box)
1
-
182
Supplying & Commissioning of Telephone Hand Set.
1
-
736
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
2
-
5704
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
30
-
474
Supplying and laying 25 mm x 5 mm CU earth strip ISI marked on surface or in recess for connection etc as required.
20
-
534
Supply of material & laying under ground/ floor/ wall including making end termination and testing of following size of Cu/G.I. wire for loop earthing of equipments, switch boards & panels as required comlete as per direction of Engineer-in-charge.
15
-
91
Pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all complete as per specification15 mm Pipe
18.9
-
165
20 mm Pipe
35.3
-
207.2
25 mm Pipe
28.2
-
258.9
40 mm Pipe
25
-
326.7
Cutting holes through existing brick work (250 mm thick wall)
32
-
53.4
Cutting hole in R.C.C floors, roofs
30
-
186.4
Cutting grooves in pucca floors and walls
45
-
205.44
Fitting and fixing brass/CP fittings Bib cock
5
-
1631.5
Long body Bib Cock
2
-
1934.5
Angular Stop cock
10
-
913.8
Pillar cock
3
-
1934.5
25mm dia Brass / Gun meta ball Valve
2
-
1006
40mm dia Brass / Gun meta ball Valve
1
-
1309
15mm dia PVC connection pipe 450 mm long
10
-
252.8
Waste Pipe
10
-
75.8
Stainless steel jalli (grating)
10
-
172.95
Health Faucet
3
-
2009
1000 litre capacity water storage tanks
1
-
13948.6
Fitting and fixing U-PVC SWR Soil Waste Ventilating Pipes 110mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme)
30
-
287.2
110mm U-PVC door Tee
6
-
222.27
110mm U-PVC offset
6
-
105
110mm U-PVC door bend
6
-
162
110mm U-PVC plain shoe bend
6
-
147
110mm U-PVC vent cowl
3
-
40
110mm P-trap
7
-
299.7
110mm U-PVC plain bend
8
-
147
10 liters capacity low level flushing cistern
3
-
1600.3
Water Closet (European type W.C. pan)
3
-
7815
Wash basins
3
-
1826.1
Sink
1
-
2240.3
Mirror
3
-
777.2
Glass-shelf
3
-
1534
Towel Rail
4
-
1018.5
Soap case
3
-
765.9
Urinal
2
-
2024.4
Urinal Partition
1
-
2842.5
Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.
1
-
1444.9
Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in CM (1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in (1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxes etc. all complete as per aproved drawing , specification and direction of Engineer-in-charge.
1
-
9686.8
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge.110 mm dia U-PVC pipes Class-3 (0.60 mpa)
10
-
287.2
160 mm dia U-PVC pipes Class-3 (0.60 mpa)
10
-
489.2
Supplying all materials, labour, T&P and constructing Man hole chamber of the following size with cement concrete (1:3:6) using 40 mm size HG metal on bed , !st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4) mix using 12 mm size H.G chips with RCC man hole cover , earth work in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all completed as per approved drawing, specification and direction of Engineer-in-charge.Inside size 900mmx900mmx900mm
1
-
16993.2
Supplying all materials,labour T&P and providing fitting submersible pump with squarrel cage inspection type submerssible type submersible electric motor to run on 3 phase/1 phase line voltage rangingfrom 320 volt to 450 volt conforming to IS :8034/89
1
-
14550
Control Pannel.
1
-
5000
2.5 Sq mm cable.
28
-
152
40mm dia steel short piece.
2
-
230
Steel rope wit cover.
18
-
45
Well Cap.
1
-
202
50mm size CI bracket.
1
-
121.2
20mm dia rigid HDPE pipes.
17
-
105
Earth work up to 30 mtr.
5
-
432
Earth work 30 to 50 mtr.
8
-
590
5'' ASTM pipe SCH-80
20
-
1090
Delivery
1
-
1200
Labour charges for lowering of summerssible pumpset with pipes and cables etc with testing and commissioning at site.
1
-
15000
Construction of 20 users 1 Nos septic tank Earth work excavation in foundation (3.22 x 2.02 x 1.9=12.36 cum)
12.36
-
207.9
Sand filling 3.22x 2.02x0.05=0.33cum
0.33
-
276
Cement Concrete(1:4:8) 3.22x2.02x0.1=0.65 cum
0.65
-
4345.1
Flyash Brick work in C.M(1:6)
4.97
-
4398.24
Cement Plaster 12mm thick C.P(1:6)
15.62
-
146.8
Cement Punning,15.62 sqm
15.62
-
146.8
Cement concrete(1:2:4),2.3x1.1=2.53 Sqm in flooring
2.53
-
6371.1
R.C.C(1:1.5:3),
0.45
-
5332.35
R.C.C(1:1.5:3),
0.39
-
9342.05
Reinforcement
3.41
-
455.5
M.S Steps,6 nos
6
-
250
Filling in foundation with excavated material,12.36-0.65-4.97-4.55=2.19cum
2.19
-
138.6
C.I Man Hole cover of 450mm dia. Over septic tank
1
-
4500
Ventilating pipe with cowl,Sepreme make (Single socket,1.8m+vent cowl)=266.5+24.3=290.80+4% vat of 290.80=302.31
1
-
302.31
Supplying all materials, labour, T&P and construction of Soak pit with 1.1m dia. Earth excavation 3.14x2x2x2.5/4=7.85cum
7.85
-
207.9
Sand filling 3.14x 1.45x0.45x0.05=0.102cum
0.1
-
276
3.14x1.45x0.45x0.1=0.205cum
0.21
-
4345.1
P.C.C(1:4:8) ,
3.4
-
4398.24
12mm C.P in C.M(1:6),3.14x1.1x0.47=1.62 sqm
1.62
-
146.8
Cement punning,same as C.P=1.62sqm
1.62
-
146.8
Brick Khoa 3.14x1.1x1.8=6.22sqm
6.22
-
298.5
R.C.C slab cover of M-20,3.14x1.6x1.6x0.1/4=0.201cum
0.2
-
5332.35
Reinforcement,0.201cum x 0.6 qntl/cum=0.12qntl
0.12
-
9342.05
Earth work in excavation of foundation in all kinds of soil within initial lead and lift including rough dressing and breaking clods etc. complete as per the direction of the engineer in charge.
181.6
-
207.9
Large Animal Treatment Shed
26.44
-
207.9
Sand filling in foundation and plinth with well waterd and rammed etc. complete.
114.53
-
276
Large Animal Treatment Shed
23.47
-
276
Foundation Filling with excavated material from the foundation trenches as per the direction of the engineer in charge.
121.67
-
104.88
Large Animal Treatment Shed
17.71
-
104.88
Cement concrete in cm(1:4:8) using 4cm size H.G metal with all cost, conveyancy etc. complete as per the direction of the engineer in charge.
34.65
-
4270.4
Large Animal Treatment Shed
8.64
-
4270.4
Fly ash brick masonry in cm (1:6) in foundation and plinth with all cost, Carriage, Royality etc. complete as per the direction of the engineer in charge.
50.07
-
4309.05
Large Animal Treatment Shed
7.52
-
4309.05
Fly ash brick masonry in cm(1:6) in Super Structure with all cost, Carriage, Royality etc. complete.
63.66
-
4398.24
Fly ash brick masonry in cm (1:4) in super structure with all cost, Carriage, Royality etc. complete.
1.3
-
4671.26
R.C.C M-20 Grade with 20mm and down grade block hard granite (crusher broken ) stone chips including hoisting and laying including cost, conveyance, royality, taxes etc. complete as per the direction of the engineer in charge.
25.6
-
5836.33
Large Animal Treatment Shed
2.26
-
5836.33
Main Building
1.01
-
5836.33
Large Animal Treatment Shed
0.3
-
5836.33
Main Building
10.5
-
5836.33
Large Animal Treatment Shed
2.44
-
5836.33
Main Building
3.88
-
9100.6
Main Building
1.51
-
5608.66
Main Building
18.17
-
12701.7
Large Animal Treatment Shed
4.09
-
12701.7
Main Building
20.81
-
9662.61
Large Animal Treatment Shed
7.25
-
9662.61
Providing HYSD Bar reinforcement for R.C.C work including straighting, cutting, bending & binding, welding, tying the grills,laying and placeing the proper position as per approved design and drawing including cost,conveyancye of 18 to 20 gauge binding wire cost and conveyance HYSD bars complete in all respect as per specification for road and bridge and direction of engineers in charge.
99.19
-
9333.3
Large Animal Treatment Shed
19.9
-
9333.3
16 mm thick C.P in cm (1:6) over Brick work with all cost, carriage,Royality etc. complete.
319.58
-
203.95
Large Animal Treatment Shed
16.2
-
203.95
12mm thick C.P in cm (1:6) over Brick work with all cost, carriage,Royality etc. complete.
480.66
-
143.8
Large Animal Treatment Shed
19.5
-
143.8
6mm thick C.P in cm (1:4) over Brick work with all cost, carriage,Royality etc. complete.
162.99
-
133.75
Large Animal Treatment Shed
89.01
-
133.75
Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlins, frames of doors and windows, ventilators and beams including the labour for fixing chaukath.
0.4
-
55643.07
32 mm thick flush door shutter made out of 32 mm BWR block board and covering with 1 mm thick sunmica to bothsides pasted with adhesive including fixing of fixtures like Godrej make mortis lock having model No 9168, Godrej make door closure having model no 8340, 100 mm aluminium heavy hinges including cost, conveyance, taxes of all materials etc. complete as directed by the Engineering in Charge.
19.85
-
6545.36
Supplying, fitting fixing of window(sliding type) made of Aluminium section 9778 as window frame section no 4095, 4096 and 9777, 3994 as shutter frame with 5 mm thich black glass as channel fitted with rubber banding including locking arrangement including all fittings including cost of material, labour, taxes, T & P etc. but excluding cost of glass complete as per direction of engineer in charge.
25.38
-
3503.52
Supplying, fitting and fixing of FRP door frame of size 75 mm X 100 mm including drilling holes in masonry with cost of all maerials, rawl plug, screws with all cost, coveyance, taxes of all materals and labour etc. complete as per direction of the engineer in charge.
14.85
-
517.13
Supplying, fitting and fixing of factory made single leaf rigid FRP compositr door shutter of 32 mm thick, laminated with to GRP skins with wood grain finish fabricated using UV stabilized isopthalic gal coat and one layer of 450 gsn E glass chopped strand mat(CSM) imprgnated with orthopathalic, polyster resin including fitting of all fixtures like hinges, tower bolt, handle, aldrop etc. with all cost, coveyance and taxes of all materials and labour etc. complete as per direction of Engineer in Charge.
4.73
-
3257.17
Fixing vitrified tiles 60 cm x 60 cm size in floors,treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including cost of tiles.
150.48
-
906.12
Fixing vitrified tiles 30 cm x 30 cm size in Floors,treads and Landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tiles.
9.58
-
1063.85
Fixing Ceramic Glazed Wall Tiles in dados,skirting and in rises of step on 25mm thick bed of cement mortar (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tiles.
40.89
-
1111
Fixing vitrified tiles in dado, skirting and risers of steps on 12 mm thick CP jointed with nit cement slurry etc complete in all respects.
19.16
-
930.13
Finishing wall surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scsffolding staging charges with cost of all materials ,Taxes , Labour etc complete (inside)
950.56
-
70.01
Large Animal Treatment Shed
124.71
-
70.01
Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. including interior wall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge.
713.31
-
206.3
Large Animal Treatment Shed
124.71
-
206.3
Providing weather coat over a coat of primer to surface of the structure or as per direction of the Engineer-in-charge.
237.25
-
138.93
Large Animal Treatment Shed
105.21
-
138.93
25mm thick grading concrete (1:2:2) on roof slab with 6mm size granite chips on new work including cost, conveyance, royality etc. complete.
166.49
-
307.05
Large Animal Treatment Shed
57.96
-
307.05
Providing and fixing MS Grill of required pattern for windows with MS Flats, squares or round bars etc. including cost of everything as directed by Engineer in Charge.
68.53
-
73.31
Painting two coats with synthetic enamel paint ove a coat primng one coat over grill & Bwood work.
29.22
-
137.59
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well ramed, consolidated and grouted with fine sand and finishing the top smooth including shuttering at the edges, excavation and disposing of surplus earth with a lead of 100m.
58.58
-
903.9
Large Animal Treatment Shed
30
-
903.9
Cement Concrete in cm (1:2:4) using 12mm size h.g.c.b chips with all cost, conveyancy etc. complete.
2.7
-
6166.6
Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
180.61
-
107.33
Large Animal Treatment Shed
45
-
107.33
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
3.5
-
3499.55
Providing and fixing Wall panelling/Partition made out of 12 mm ply,1 mm thick laminate ( over partition/ wall panelling for design ) complete with necessary Hardwood etc. as per the detail design including the cost of all materials, labour, overheads and T & P etc. complete .as per the direction of the Engineer in charge.
30.24
-
9619
Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type Modular switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL) (Make of Modular Box-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) Group-C . Single light point controlled by one 6A switch or first light point or group control
20
-
1033
Ex.fan point controlled by one 6A switch
3
-
1033
Call bell point controlled by one 6A switch
1
-
1033
Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)
13
-
464
Recessed wiring to ceiling fan point including modular Stepped type regulator with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)
9
-
1538
Supply & fixing of 5 / 6 amp socket outlet on existing switch board with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
5
-
535
Supply, fixing with recessed wiring to 5 / 6 amp socket outlet on separate board 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.
8
-
716
Supply & fixing of 6 pin 16 amp socket outlet with 16Amp Switch, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
3
-
672
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
(For subsequent point of group control )
30
-
132
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (From BDB to Switch Board & 16A socket points )
150
-
146
Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(For BDB-L's )
20
-
206
Recessed wiring to submain in 4 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (For BDB-P's)
30
-
315
Supply, fixing of indoor type 1 No tamper proof 3 phase 4 wire KWH meter box with provision of 1no 5-30A Digital KWH meter in tamper-proof enclosure with locking & sealing arrangement and viewing window as approved by Supply authority
1
-
7389
Supplying and fixing of 1 No ICTP box with 3no. 63A, 440V kit kat fuse in Metallic enclosure with locking arrangement as approved by Supply authority
1
-
2956
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Legrand/Hager/Siemens/Schneider make, or any other equivalent of reputed make ISI marked as approved.
12
-
132
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted following sizes TPN , MCB DB suitable for 415 V, 3phase, 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.(But without MCB/ RCCB/ ISOLATOR) (Legrand/L&T/ Schneider) .
1
-
2179
Supplying and fixing 25-63 Amps rating, FP, 415 volts, RCCB,100mA (L&T / Legrand/ Siemens /Schneider) make or any other reputed equivalent catagories make ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
-
2152
Supply of material , laying & termination of 2Cx6sqmm weather proof PVC insulated PVC sheathed aluminium Conductor unarmoured Service Connection wire from the nearest LTOH line support upto the tamper proof KWH meter boards alongwith 10 SWG G.I support wire etc. completea as required and as per direction of Engineer-in-charge.
50
-
167
Supply & fixing of 1.5.mtr long G.I bend pipe made out of 25 mm dia, medium duty G.I Pipe to be fixed on the wall ffor receiving Service Connection wire upto the meter board as per the approval of local supply authority.
1
-
476
Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.(Make-Philips/ Bajaj/ Havells/ Crompton) 1x9 watt LED lamp of Ujalla Scheme ( Energy Efficiency Services Ltd - EESL ) on existing Angle/batten holder
6
-
88
1x20W LED TL fitting with all connections similar to Jaquar lighting item No LGLZ01X020XN or equivalent
23
-
733
1x15W LED Surface fitting with all connections similar to Jaquar lighting item No LZET03R015XC or equivalent
4
-
2350
Supply, fixing & termination of Outdoor Street Light LED Luminaire with 45w LED Lamp ( with external SPD 10kV) similar to Jaquar Item No LSTR01S045XC or equivalent to / Philips / Crompton / Wipro Make complete and interconnections with 3Cx1.5sqmm FRLS PVC insulated cable.
1
-
6648
Supply, Installation, Testing and Commissioning of BEE 5 star rated ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
8
-
2601
Supply, Installation, Testing and Commissioning of BEE 5 star rated ceiling fan 1400mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
1
-
2802
Supply, Installation, testing and commissioning of exhaust fan of 225 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
3
-
2548
Providing and fixing extra down rod of 50 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required . ( more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored
1
-
59
Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required.
1
-
179
Numbering ceiling fan / exhaust fan / fluorescent fittings as required
46
-
25
Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
1
-
394
Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.
25
-
45
Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
25
-
100
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
( Tel junction Box)
1
-
182
Supplying & Commissioning of Telephone Hand Set.
1
-
736
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
2
-
5704
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
30
-
474
Supplying and laying 25 mm x 5 mm CU earth strip ISI marked on surface or in recess for connection etc as required.
20
-
534
Supply of material & laying under ground/ floor/ wall including making end termination and testing of following size of Cu/G.I. wire for loop earthing of equipments, switch boards & panels as required comlete as per direction of Engineer-in-charge.
15
-
91
Pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all complete as per specification 15 mm Pipe
18.9
-
165
20 mm Pipe
35.3
-
207.2
25 mm Pipe
28.2
-
258.9
40 mm Pipe
25
-
326.7
Cutting holes through existing brick work (250 mm thick wall)
32
-
53.4
Cutting hole in R.C.C floors, roofs
30
-
186.4
Cutting grooves in pucca floors and walls
45
-
205.44
Fitting and fixing brass/CP fittings Bib cock
5
-
1631.5
Long body Bib Cock
2
-
1934.5
Angular Stop cock
10
-
913.8
Pillar cock
3
-
1934.5
25mm dia Brass / Gun meta ball Valve
2
-
1006
40mm dia Brass / Gun meta ball Valve
1
-
1309
15mm dia PVC connection pipe 450 mm long
10
-
252.8
Waste Pipe
10
-
75.8
Stainless steel jalli (grating)
10
-
172.95
Health Faucet
3
-
2009
1000 litre capacity water storage tanks
1
-
13948.6
Fitting and fixing U-PVC SWR Soil Waste Ventilating Pipes 110mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme)
30
-
287.2
110mm U-PVC door Tee
6
-
222.27
110mm U-PVC offset
6
-
105
110mm U-PVC door bend
6
-
162
110mm U-PVC plain shoe bend
6
-
147
110mm U-PVC vent cowl
3
-
40
110mm P-trap
7
-
299.7
110mm U-PVC plain bend
8
-
147
10 liters capacity low level flushing cistern
3
-
1600.3
Water Closet (European type W.C. pan)
3
-
7815
Wash basins
3
-
1826.1
Sink
1
-
2240.3
Mirror
3
-
777.2
Glass-shelf
3
-
1534
Towel Rail
4
-
1018.5
Soap case
3
-
765.9
Urinal
2
-
2024.4
Urinal Partition
1
-
2842.5
Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.
1
-
1444.9
Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in CM (1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in (1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxes etc. all complete as per aproved drawing , specification and direction of Engineer-in-charge.Inside size 760mm x760mm x450mm
1
-
9686.8
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge.110 mm dia U-PVC pipes Class-3 (0.60 mpa)
10
-
287.2
160 mm dia U-PVC pipes Class-3 (0.60 mpa)
10
-
489.2
Supplying all materials, labour, T&P and constructing Man hole chamber of the following size with cement concrete (1:3:6) using 40 mm size HG metal on bed , !st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4) mix using 12 mm size H.G chips with RCC man hole cover , earth work in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all completed as per approved drawing, specification and direction of Engineer-in-charge.Inside size 900mmx900mmx900mm
1
-
16993.2
Supplying all materials,labour T&P and providing fitting submersible pump with squarrel cage inspection type submerssible type submersible electric motor to run on 3 phase/1 phase line voltage rangingfrom 320 volt to 450 volt conforming to IS :8034/89 One no. 3 phase 3 stage head range 30 to 54 mtr. Discharge 155 to 200 LMP with outlate dia 32mm.
1
-
14550
Control Pannel.
1
-
5000
2.5 Sq mm cable.
28
-
152
40mm dia steel short piece.
2
-
230
Steel rope wit cover.
18
-
45
Well Cap.
1
-
202
50mm size CI bracket.
1
-
121.2
20mm dia rigid HDPE pipes.
17
-
105
Earth work up to 30 mtr.
5
-
432
Earth work 30 to 50 mtr.
8
-
590
5'' ASTM pipe SCH-80
20
-
1090
Delivery
1
-
1200
Labour charges for lowering of summerssible pumpset with pipes and cables etc with testing and commissioning at site.
1
-
15000
Construction of 20 users 1 Nos septic tankEarth work excavation in foundation (3.22 x 2.02 x 1.9=12.36 cum)
12.36
-
207.9
Sand filling 3.22x 2.02x0.05=0.33cum
0.33
-
276
Cement Concrete(1:4:8) 3.22x2.02x0.1=0.65 cum
0.65
-
4345.1
Flyash Brick work in C.M(1:6)
4.97
-
4398.24
Cement Plaster 12mm thick C.P(1:6)
15.62
-
146.8
Cement Punning,15.62 sqm
15.62
-
146.8
Cement concrete(1:2:4),2.3x1.1=2.53 Sqm in flooring
2.53
-
6371.1
R.C.C(1:1.5:3),
0.45
-
5332.35
t=0.448x0.88qntl/cum=0.39 Qntl
0.39
-
9342.05
Reinforcemen
3.41
-
455.5
M.S Steps,6 nos
6
-
250
Filling in foundation with excavated material,12.36-0.65-4.97-4.55=2.19cum
2.19
-
138.6
C.I Man Hole cover of 450mm dia. Over septic tank
1
-
4500
Ventilating pipe with cowl,Sepreme make (Single socket,1.8m+vent cowl)=266.5+24.3=290.80+4% vat of 290.80=302.31
1
-
302.31
Supplying all materials, labour, T&P and construction of Soak pit with 1.1m dia. Earth excavation 3.14x2x2x2.5/4=7.85cum
7.85
-
207.9
Sand filling 3.14x 1.45x0.45x0.05=0.102cum
0.1
-
276
P.C.C(1:4:8) , 3.14x1.45x0.45x0.1=0.205cum
0.21
-
4345.1
Flyash Brick masonry in C.M(1:6)
3.4
-
4398.24
12mm C.P in C.M(1:6),3.14x1.1x0.47=1.62 sqm
1.62
-
146.8
Cement punning,same as C.P=1.62sqm
1.62
-
146.8
Brick Khoa 3.14x1.1x1.8=6.22sqm
6.22
-
298.5
R.C.C slab cover of M-20,3.14x1.6x1.6x0.1/4=0.201cum
0.2
-
5332.35
Reinforcement,0.201cum x 0.6 qntl/cum=0.12qntl
0.12
-
9342.05
Earth work in excavation of foundation in all kinds of soil within initial lead and lift including rough dressing and breaking clods etc. complete as per the direction of the engineer in charge.
181.6
-
207.9
Large Animal Treatment Shed
26.44
-
207.9
Sand filling in foundation and plinth with well waterd and rammed etc. complete.
114.53
-
453.75
Large Animal Treatment Shed
23.47
-
453.75
Foundation Filling with excavated material from the foundation trenches as per the direction of the engineer in charge.
121.67
-
104.88
Large Animal Treatment Shed
17.71
-
104.88
Cement concrete in cm(1:4:8) using 4cm size H.G metal with all cost, conveyancy etc. complete as per the direction of the engineer in charge.
34.65
-
4475.15
Large Animal Treatment Shed
8.64
-
4475.15
Fly ash brick masonry in cm (1:6) in foundation and plinth with all cost, Carriage, Royality etc. complete as per the direction of the engineer in charge.
50.07
-
4309.05
Large Animal Treatment Shed
7.52
-
4309.05
Fly ash brick masonry in cm(1:6) in Super Structure with all cost, Carriage, Royality etc. complete.
63.66
-
4398.24
Fly ash brick masonry in cm (1:4) in super structure with all cost, Carriage, Royality etc. complete.
1.3
-
4671.26
R.C.C M-20 Grade with 20mm and down grade block hard granite (crusher broken ) stone chips including hoisting and laying including cost, conveyance, royality, taxes etc. complete as per the direction of the engineer in charge.Main Building
25.6
-
6028.31
Large Animal Treatment Shed
2.26
-
6028.31
Main Building
1.01
-
6028.31
Large Animal Treatment Shed
0.3
-
6028.31
Main Building
10.5
-
6028.31
Large Animal Treatment Shed
2.44
-
6028.31
Main Building
3.88
-
9292.58
Main Building
1.51
-
5800.64
Main Building
18.17
-
12893.68
Large Animal Treatment Shed
4.09
-
12893.68
Main Building
20.81
-
9854.59
Large Animal Treatment Shed
7.25
-
9854.59
Providing HYSD Bar reinforcement for R.C.C work including straighting, cutting, bending & binding, welding, tying the grills,laying and placeing the proper position as per approved design and drawing including cost,conveyancye of 18 to 20 gauge binding wire cost and conveyance HYSD bars complete in all respect as per specification for road and bridge and direction of engineers in charge.
99.19
-
9333.3
Large Animal Treatment Shed
19.9
-
9333.3
16 mm thick C.P in cm (1:6) over Brick work with all cost, carriage,Royality etc. complete.
319.58
-
203.95
Large Animal Treatment Shed
16.2
-
203.95
12mm thick C.P in cm (1:6) over Brick work with all cost, carriage,Royality etc. complete.
480.66
-
143.8
Large Animal Treatment Shed
19.5
-
143.8
6mm thick C.P in cm (1:4) over Brick work with all cost, carriage,Royality etc. complete.
162.99
-
133.75
Large Animal Treatment Shed
89.01
-
133.75
Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlins, frames of doors and windows, ventilators and beams including the labour for fixing chaukath.
0.4
-
55643.07
32 mm thick flush door shutter made out of 32 mm BWR block board and covering with 1 mm thick sunmica to bothsides pasted with adhesive including fixing of fixtures like Godrej make mortis lock having model No 9168, Godrej make door closure having model no 8340, 100 mm aluminium heavy hinges including cost, conveyance, taxes of all materials etc. complete as directed by the Engineering in Charge.
19.85
-
6545.36
Supplying, fitting fixing of window(sliding type) made of Aluminium section 9778 as window frame section no 4095, 4096 and 9777, 3994 as shutter frame with 5 mm thich black glass as channel fitted with rubber banding including locking arrangement including all fittings including cost of material, labour, taxes, T & P etc. but excluding cost of glass complete as per direction of engineer in charge.
25.38
-
3503.52
Supplying, fitting and fixing of FRP door frame of size 75 mm X 100 mm including drilling holes in masonry with cost of all maerials, rawl plug, screws with all cost, coveyance, taxes of all materals and labour etc. complete as per direction of the engineer in charge.
14.85
-
517.13
Supplying, fitting and fixing of factory made single leaf rigid FRP compositr door shutter of 32 mm thick, laminated with to GRP skins with wood grain finish fabricated using UV stabilized isopthalic gal coat and one layer of 450 gsn E glass chopped strand mat(CSM) imprgnated with orthopathalic, polyster resin including fitting of all fixtures like hinges, tower bolt, handle, aldrop etc. with all cost, coveyance and taxes of all materials and labour etc. complete as per direction of Engineer in Charge.
4.73
-
3257.17
Fixing vitrified tiles 60 cm x 60 cm size in floors,treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including cost of tiles.
150.48
-
906.12
Fixing vitrified tiles 30 cm x 30 cm size in Floors,treads and Landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tiles.
9.58
-
1063.85
Fixing Ceramic Glazed Wall Tiles in dados,skirting and in rises of step on 25mm thick bed of cement mortar (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tiles.
40.89
-
1111
Fixing vitrified tiles in dado, skirting and risers of steps on 12 mm thick CP jointed with nit cement slurry etc complete in all respects.
19.16
-
930.13
Finishing wall surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scsffolding staging charges with cost of all materials ,Taxes , Labour etc complete (inside)
950.56
-
70.01
Large Animal Treatment Shed
124.71
-
70.01
Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. including interior wall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge.
713.31
-
206.3
Large Animal Treatment Shed
124.71
-
206.3
Providing weather coat over a coat of primer to surface of the structure or as per direction of the Engineer-in-charge.
237.25
-
138.93
Large Animal Treatment Shed
105.21
-
138.93
25mm thick grading concrete (1:2:2) on roof slab with 6mm size granite chips on new work including cost, conveyance, royality etc. complete.
166.49
-
310.65
Large Animal Treatment Shed
57.96
-
310.65
Providing and fixing MS Grill of required pattern for windows with MS Flats, squares or round bars etc. including cost of everything as directed by Engineer in Charge.
68.53
-
73.31
Painting two coats with synthetic enamel paint ove a coat primng one coat over grill & Bwood work.
29.22
-
137.59
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well ramed, consolidated and grouted with fine sand and finishing the top smooth including shuttering at the edges, excavation and disposing of surplus earth with a lead of 100m.
58.58
-
903.9
Large Animal Treatment Shed
30
-
903.9
Cement Concrete in cm (1:2:4) using 12mm size h.g.c.b chips with all cost, conveyancy etc. complete.
2.7
-
6358.6
Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
180.61
-
107.33
Large Animal Treatment Shed
45
-
107.33
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
3.5
-
3499.55
Providing and fixing Wall panelling/Partition made out of 12 mm ply,1 mm thick laminate ( over partition/ wall panelling for design ) complete with necessary Hardwood etc. as per the detail design including the cost of all materials, labour, overheads and T & P etc. complete .as per the direction of the Engineer in charge. Main Building
30.24
-
9619
Pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all complete as per specification 15 mm Pipe
18.9
-
165
20 mm Pipe
35.3
-
207.2
25 mm Pipe
28.2
-
258.9
40 mm Pipe
25
-
326.7
Cutting holes through existing brick work (250 mm thick wall)
32
-
53.4
Cutting hole in R.C.C floors, roofs
30
-
186.4
Cutting grooves in pucca floors and walls
45
-
205.44
Fitting and fixing brass/CP fittings Bib cock
5
-
1631.5
Long body Bib Cock
2
-
1934.5
Angular Stop cock
10
-
913.8
Pillar cock
3
-
1934.5
25mm dia Brass / Gun meta ball Valve
2
-
1006
40mm dia Brass / Gun meta ball Valve
1
-
1309
15mm dia PVC connection pipe 450 mm long
10
-
252.8
Waste Pipe
10
-
75.8
Stainless steel jalli (grating)
10
-
172.95
Health Faucet
3
-
2009
1000 litre capacity water storage tanks
1
-
13948.6
Fitting and fixing U-PVC SWR Soil Waste Ventilating Pipes 110mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme)
30
-
287.2
110mm U-PVC door Tee
6
-
222.27
110mm U-PVC offset
6
-
105
110mm U-PVC door bend
6
-
162
110mm U-PVC plain shoe bend
6
-
147
110mm U-PVC vent cowl
3
-
40
110mm P-trap
7
-
299.7
110mm U-PVC plain bend
8
-
147
10 liters capacity low level flushing cistern
3
-
1600.3
Water Closet (European type W.C. pan)
3
-
7815
Wash basins
3
-
1826.1
Sink
1
-
2240.3
Mirror
3
-
777.2
Glass-shelf
3
-
1534
Towel Rail
4
-
1018.5
Soap case
3
-
765.9
Urinal
2
-
2024.4
Urinal Partition
1
-
2842.5
Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.250mmx250mm with RCC cover
1
-
1444.9
Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in CM (1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in (1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxes etc. all complete as per aproved drawing , specification and direction of Engineer-in-charge.Inside size 760mm x760mm x450mm
1
-
9686.8
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH s110 mm dia U-PVC pipes Class-3 (0.60 mpa)pecification and direction of the Engineer-in-charge.
10
-
287.2
160 mm dia U-PVC pipes Class-3 (0.60 mpa)
10
-
489.2
Supplying all materials, labour, T&P and constructing Man hole chamber of the following size with cement concrete (1:3:6) using 40 mm size HG metal on bed , !st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4) mix using 12 mm size H.G chips with RCC man hole cover , earth work in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite payment of royalty, taxes etc. all completed as per approved drawing, specification and direction of Engineer-in-charge.
1
-
16993.2
Supplying all materials,labour T&P and providing fitting submersible pump with squarrel cage inspection type submerssible type submersible electric motor to run on 3 phase/1 phase line voltage rangingfrom 320 volt to 450 volt conforming to IS :8034/89 One no. 3 phase 3 stage head range 30 to 54 mtr. Discharge 155 to 200 LMP with outlate dia 32mm.
1
-
14550
Control Pannel.
1
-
5000
2.5 Sq mm cable.
28
-
152
40mm dia steel short piece.
2
-
230
Steel rope wit cover.
18
-
45
Well Cap.
1
-
202
50mm size CI bracket.
1
-
121.2
20mm dia rigid HDPE pipes.
17
-
105
Earth work up to 30 mtr.
5
-
432
Earth work 30 to 50 mtr.
8
-
590
5'' ASTM pipe SCH-80
20
-
1090
Delivery
1
-
1200
Labour charges for lowering of summerssible pumpset with pipes and cables etc with testing and commissioning at site.
1
-
15000
Construction of 20 users 1 Nos septic tank Earth work excavation in foundation (3.22 x 2.02 x 1.9=12.36 cum)
12.36
-
207.9
Sand filling 3.22x 2.02x0.05=0.33cum
0.33
-
276
Cement Concrete(1:4:8) 3.22x2.02x0.1=0.65 cum
0.65
-
4345.1
Flyash Brick work in C.M(1:6)
4.97
-
4398.24
Cement Plaster 12mm thick C.P(1:6)
15.62
-
146.8
Cement Punning,15.62 sqm
15.62
-
146.8
Cement concrete(1:2:4),2.3x1.1=2.53 Sqm in flooring
2.53
-
6371.1
R.C.C(1:1.5:3),
0.45
-
5332.35
Reinforcement=0.448x0.88qntl/cum=0.39 Qntl
0.39
-
9342.05
Centering & shuttering,
3.41
-
455.5
M.S Steps,6 nos
6
-
250
Filling in foundation with excavated material,12.36-0.65-4.97-4.55=2.19cum
2.19
-
138.6
C.I Man Hole cover of 450mm dia. Over septic tank
1
-
4500
Ventilating pipe with cowl,Sepreme make (Single socket,1.8m+vent cowl)=266.5+24.3=290.80+4% vat of 290.80=302.31
1
-
302.31
Supplying all materials, labour, T&P and construction of Soak pit with 1.1m dia.Earth excavation 3.14x2x2x2.5/4=7.85cum
7.85
-
207.9
Sand filling 3.14x 1.45x0.45x0.05=0.102cum
0.1
-
276
P.C.C(1:4:8) , 3.14x1.45x0.45x0.1=0.205cum
0.21
-
4345.1
Flyash Brick masonry in C.M(1:6)
3.4
-
4398.24
12mm C.P in C.M(1:6),3.14x1.1x0.47=1.62 sqm
1.62
-
146.8
Cement punning,same as C.P=1.62sqm
1.62
-
146.8
Brick Khoa 3.14x1.1x1.8=6.22sqm
6.22
-
298.5
R.C.C slab cover of M-20,3.14x1.6x1.6x0.1/4=0.201cum
0.2
-
5332.35
Reinforcement,0.201cum x 0.6 qntl/cum=0.12qntl
0.12
-
9342.05
Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type Modular switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL) (Make of Modular Box-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) Group-C .Single light point controlled by one 6A switch or first light point or group control
20
-
1033
Ex.fan point controlled by one 6A switch
3
-
1033
Call bell point controlled by one 6A switch
1
-
1033
Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)
13
-
464
Recessed wiring to ceiling fan point including modular Stepped type regulator with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL)
9
-
1538
Supply & fixing of 5 / 6 amp socket outlet on existing switch board with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
5
-
535
Supply, fixing with recessed wiring to 5 / 6 amp socket outlet on separate board 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.
8
-
716
Supply & fixing of 6 pin 16 amp socket outlet with 16Amp Switch, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge.
3
-
672
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
(For subsequent point of group control )
30
-
132
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (From BDB to Switch Board & 16A socket points )
150
-
146
Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(For BDB-L's )
20
-
206
Recessed wiring to submain in 4 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (For BDB-P's)
30
-
315
Supply, fixing of indoor type 1 No tamper proof 3 phase 4 wire KWH meter box with provision of 1no 5-30A Digital KWH meter in tamper-proof enclosure with locking & sealing arrangement and viewing window as approved by Supply authority
1
-
7389
Supplying and fixing of 1 No ICTP box with 3no. 63A, 440V kit kat fuse in Metallic enclosure with locking arrangement as approved by Supply authority
1
-
2956
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Legrand/Hager/Siemens/Schneider make, or any other equivalent of reputed make ISI marked as approved.
12
-
132
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted following sizes TPN , MCB DB suitable for 415 V, 3phase, 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.(But without MCB/ RCCB/ ISOLATOR) (Legrand/L&T/ Schneider) .
1
-
2179
Supplying and fixing 25-63 Amps rating, FP, 415 volts, RCCB,100mA (L&T / Legrand/ Siemens /Schneider) make or any other reputed equivalent catagories make ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required.
1
-
2152
Supply of material , laying & termination of 2Cx6sqmm weather proof PVC insulated PVC sheathed aluminium Conductor unarmoured Service Connection wire from the nearest LTOH line support upto the tamper proof KWH meter boards alongwith 10 SWG G.I support wire etc. completea as required and as per direction of Engineer-in-charge.
50
-
167
Supply & fixing of 1.5.mtr long G.I bend pipe made out of 25 mm dia, medium duty G.I Pipe to be fixed on the wall ffor receiving Service Connection wire upto the meter board as per the approval of local supply authority.
1
-
476
Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.(Make-Philips/ Bajaj/ Havells/ Crompton)1x9 watt LED lamp of Ujalla Scheme ( Energy Efficiency Services Ltd - EESL ) on existing Angle/batten holder
6
-
88
1x20W LED TL fitting with all connections similar to Jaquar lighting item No LGLZ01X020XN or equivalent
23
-
733
1x15W LED Surface fitting with all connections similar to Jaquar lighting item No LZET03R015XC or equivalent
4
-
2350
Supply, fixing & termination of Outdoor Street Light LED Luminaire with 45w LED Lamp ( with external SPD 10kV) similar to Jaquar Item No LSTR01S045XC or equivalent to / Philips / Crompton / Wipro Make complete and interconnections with 3Cx1.5sqmm FRLS PVC insulated cable.
1
-
6648
Supply, Installation, Testing and Commissioning of BEE 5 star rated ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
8
-
2601
Supply, Installation, Testing and Commissioning of BEE 5 star rated ceiling fan 1400mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
1
-
2802
Supply, Installation, testing and commissioning of exhaust fan of 225 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
3
-
2548
Providing and fixing extra down rod of 50 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required . ( more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored
1
-
59
Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required.
1
-
179
Numbering ceiling fan / exhaust fan / fluorescent fittings as required
46
-
25
Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
1
-
394
Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.
25
-
45
Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
25
-
100
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
( Tel junction Box)
1
-
182
Supplying & Commissioning of Telephone Hand Set.
1
-
736
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
2
-
5704
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
30
-
474
Supplying and laying 25 mm x 5 mm CU earth strip ISI marked on surface or in recess for connection etc as required.
20
-
534
Supply of material & laying under ground/ floor/ wall including making end termination and testing of following size of Cu/G.I. wire for loop earthing of equipments, switch boards & panels as required comlete as per direction of Engineer-in-charge.
15
-
91
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements