The Odisha Small Industries Corporation Limited Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
The Odisha Small Industries Corporation Limited - OSIC Tender
Eprocure
Opening Date13 May 2021
Closing Date7 Jun 2021
Tender Amount₹ 28,23,00,000
Costs
EMD
Refer DocumentsDocument Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_OSIC_68411_1Bid Award Id
ViewTender No
OSIC/Constn./2021-2022/01Tender Authority
The Odisha Small Industries Corporation Limited ViewPurchaser Address
-Website
http://http://www.osicltd.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Excavation of foundation in laterite rock or any hard rock (other than granite or disintigrated rocks) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department.
1838.17
-
1338
Removing surplus earth from work site by mechanical means withien 5KM lead including loading, and unloading including cost of all labour,T&P etc. complete.
4331.97
-
151.2
Filling foundation and plinth with sand well watered and rammmed including cost, convayance and royality etc. complete
1723.45
-
332.7
Cement concrete (1:3:6) in foundation and plinth using 40mm size b.h.g.c.b metal including mixing and laying in proper place compacting watering including cost convayance and royalityb and taxes etc. complete
440.67
-
4156.6
Providing and laying Plain Cement Concrete of proportion (1:2:4) in foundation and floors (i.e. below the base course of the flooring) using cement , 12 mm size crusher broken H.G chipsl and screened & washed sharp river sand for mortar of approved quality & from approved quarry including hoisting, lowering and laying concrete to the required level, ramming, watering & curing etc complete to required levels, laid in layers not exceeeding 15cm thick in each layer including cost, conveyance , loading,unloading,royalties and taxes of all materials, cost of all labour, Sundries, T&P required for the work including shoring, shuttering and dewatering ( if required) including hire and running charges of water pump required for the work etc complete in all respect as directed by the Engineer-in-charge.
43.38
-
5372.9
R.C.C M 25 grade of concrete using 20mm and 10mm down graded concrete using crushed stone aggregates mixed by vibrtator and all leads and alllifts including frame works etc. complete
-
-
-
a) Column Base footing
922.09
-
4665.7
b) Column up toPL
-
-
-
Plinth beam
144.24
-
5016.4
Column Superstructure
-
-
-
Ground floor
320.46
-
10279.4
1st floor
151.07
-
11514.2
2nd floor
151.07
-
12991.5
3rd floor
151.07
-
14759.8
4th floor
151.07
-
16876.7
5th floor
54.94
-
19575
d) Lintel
-
-
-
Ground floor
36.85
-
8135.6
1st floor
43.06
-
8941.7
2nd floor
43.06
-
9904.8
3rd floor
43.06
-
11055.8
4th floor
43.06
-
12431.6
e) Sill Band
-
-
-
Ground floor
4.53
-
8135.6
1st floor
5.12
-
8941.7
2nd floor
5.12
-
9904.8
3rd floor
5.12
-
11055.8
4th floor
5.12
-
12431.6
e) Chajja 65mm thick
-
-
-
Ground floor
215.8
-
757.4
1st floor
215.8
-
855.5
2nd floor
215.8
-
973
3rd floor
215.8
-
1113.6
4th floor
215.8
-
1282
f) Roof Beam
-
-
-
Ground floor
162.28
-
10279.4
1st floor
155.53
-
11514.2
2nd floor
155.53
-
12991.5
3rd floor
155.53
-
14759.8
4th floor
155.53
-
16876.7
5th floor
34.05
-
19575
g) Roof Slab
-
-
-
Ground floor
299.89
-
8732.6
1st floor
281.53
-
9658
2nd floor
281.53
-
10764.4
3rd floor
281.53
-
12087.3
4th floor
281.53
-
13669.4
5th floor
65.87
-
15726.6
h)Stair case
-
-
-
Ground floor
29.76
-
9802.7
1st floor
29.76
-
10942.1
2nd floor
29.76
-
12305.3
3rd floor
29.76
-
13936.5
4th floor
29.76
-
15888.4
i) Shelves
-
-
-
Ground floor
21.61
-
633.2
1st floor
80.99
-
729.1
2nd floor
80.99
-
843.9
3rd floor
80.99
-
981.6
4th floor
80.99
-
1146.6
i) Fins
-
-
-
Ground floor
136.5
-
1571.3
1st floor
191.1
-
1823.9
2nd floor
191.1
-
2126.8
3rd floor
191.1
-
2490
4th floor
191.1
-
2925.3
j) RCC Wall
-
-
-
Ground floor
33.75
-
8829.6
Cement concrete (1:6:12) in foundation and plinth using 12mm size b.h.g.c.b metal including mixing and laying in proper place compacting watering including cost convayance and royalityb and taxes etc. complete ( 5th floor)
28.8
-
19739
Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge including cost of all labour and all labour and materials etc complete.
-
-
-
Ground floor
2201.79
-
8049.9
1st floor
930.57
-
8073.1
2nd floor
930.57
-
8097.4
3rd floor
930.57
-
8123
4th floor
930.57
-
8149.8
5th floor
222.95
-
8178
Providing First Class Fly Ash Brick Masonry using F.A. bricks of size 25 c.m x 12 c.m x 8 c.m having crushing strength not less than 75 kg per square c.m. in cement mortar of mix (1:6) with cement and screened & washed sharp sand for mortar after immersing the F.A bricks for 6 (Six) hours in water before use in the works in Foundation & Plinth and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance, loading, unloading, royalties and taxes of all materials,cost of all labour,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
-
-
-
In Foundation and Plinth
486.83
-
3983.9
Providing Fly Ash Brick Masonry using F.A. bricks of size 25 c.m. x 12 c.m. x 8 c.m. having crushing strength not less than 75 kg per square c.m. in cement mortar of mix (1:6) with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in the works in superstructure and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
-
-
-
Ground floor
355.98
-
4017.2
1st floor
416.9
-
4276.8
2nd floor
416.9
-
4575.3
3rd floor
416.9
-
4918.6
4th floor
416.9
-
5313.4
5th floor
191.17
-
5767.4
Providing Fly Ash brick masonry using F.A. bricks of size 25 c.m. x 12 c.m. x 8 c.m.having crushing strength not less than 75 kg per square c.m in cement mortar of mix (1:4) (for half brick masonry wall) with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in superstructure and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance, loading, unloading, royalties and taxes of all materials ,cost of all labour, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
-
-
-
Ground floor
74.16
-
4182.5
1st floor
187.6
-
4442
2nd floor
187.6
-
4740.6
3rd floor
187.6
-
5083.8
4th floor
187.6
-
5478.6
12mm thick cement plaster in cement mortar (1:4) RCC surface without punning in all floors at all height finishing smooth to smooth surface of brick walls after raking out the joints including watering and curing rounding of corners with cost conveyance royalties and taxes of all materials and cost of all labour, scaffolding sundries and / T&P etc required for the work etc, complete as directed by the Engineer in charge.
-
-
-
Ground floor
3638.18
-
157.3
1st floor
3638.18
-
161.1
2nd floor
3638.18
-
165
3rd floor
3638.18
-
168.9
4th floor
3638.18
-
173.1
5th floor
542
-
177.3
12mm thick C.P. with C.M.(1:6) over the out side surface of wall including cost, conveyance, royalty, taxes of all materials, labour, T&P etc.requered for the work etc. complete. (out side Surface)
-
-
-
Ground floor
2480.61
-
130.1
1st floor
4503.63
-
135.5
2nd floor
4503.63
-
141.1
3rd floor
4503.63
-
147.1
4th floor
4503.63
-
153.3
5th floor
1439.63
-
159.8
16mm thick C.P. with C.M.(1:6) over the inside surface of wall including cost, conveyance, royalty, taxes of all materials, labour, T&P requered for the work etc. complete.
-
-
-
Ground floor
2480.61
-
186.8
1st floor
4503.63
-
191.6
2nd floor
4503.63
-
196.5
3rd floor
4503.63
-
201.6
4th floor
4503.63
-
206.8
5th floor
1439.63
-
212.2
Supplying fitting and fixing Ultra designer floor tile of approved size quality & thickness on floor / tread / steps and landing on 25mm thick bed of CM 1:1jointed with neat cement slurry mixed with pigment to match the shade of tiles including cleaning the floor surface smooth including cutting to proper size with cost conveyance royalties and taxes of all materials and cost of all lab our sundries and T&P etc required floor lathes work complete in all respect as directed by the Engineer in charge.
-
-
-
Ground floor
921.7
-
1032.7
Supplying, Fitting & Fixing special plain / printed series Glazed Ceramic Wall Tiles of primum grade ( i.e 300 m.m X.200.m.m or 200 m.m X.200.m.m size & having thickness of 6.5 m.m to 6.7 m.m confirming to IS.13753 ) of approved shade and quality in proper position in dados skirting and riser of steps in all floors at all heights on 12 mm. thick cement plaster (1:3) using screened and washed sharp river sand for mortar with cement, grounted with neat cement slurry and jointed with neat cement mixed with required shade of pigment to match the shade of the Glazed Ceramic Wall Tiles (Tiles are to be immersed in the water before use for required hours ) including cost, conveyance, loading, unloading,stacking, royalties and taxes of all materials, cost of all labour, curing, sundries and T&P, etc. required for the work complete as directed by the Engineer-in-charge.(Make-Jhosan/Kujaria/Regency) to be approved before purchase & use.
-
-
-
Ground floor
237.46
-
716.7
Providing ,Fitting and Fixing minimum 8 m.m to 10m.m thick Vitrified Tile in flooring using Vitrified Tile of approved quality, colour and size(600 m.m x 600 m.m coloured printed series homogeneous) in floors, treads on steps and landings in all floors at all height on 25 m.m thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened & washed sharp river sand for mortar and grouted with neat white cement slurry joining the Vitrified Tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the Vitrified Tile if required (Tiles are to be immersed in the water for required time before use) including cost, conveyance, loading, unloading, stacking, royalties and taxes of all Materials, cost of all Labour, Sundries, T&P required for the work ,Watering,Curing for required days including cleaning the flooring space manually etc. complete in all respect as directed by the Engineer-in-charge.
-
-
-
Ground floor
1448.94
-
874.8
1st floor
1653.24
-
884.4
2nd floor
1653.24
-
894.5
3rd floor
1653.24
-
905.1
4th floor
1653.24
-
916.2
Providing, Fitting & Fixing of 8 mm. to 10mm. thick Vitrified Tile ( of size 600 m.m x 600 m.m ) of NITCO or equivalent make confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in dados skirting and riser of steps in all floors at all heights on 12m.m thick cement mortar (1:3) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge.
-
-
-
Ground floor
104.2
-
971.9
1st floor
116.5
-
986.3
2nd floor
116.5
-
1001.5
3rd floor
116.5
-
1017.4
4th floor
116.5
-
1034.2
Providing fitting and fixing of granite tiles in flooring with cement mortar (1:1) including cost convayance and royality etc complete
-
-
-
Ground floor
563.03
-
2241.7
1st floor
306
-
2251.3
2nd floor
306
-
2261.3
3rd floor
306
-
2271.9
4th floor
306
-
2283.1
5th floor
306
-
2294.7
providing fitting and fixing of granite tiles in dadoos skirting with cement mortar (1:3) including cost convayance and royality etc complete
-
-
-
Ground floor
50.25
-
2270.6
1st floor
29.25
-
2285.1
2nd floor
29.25
-
2300.2
3rd floor
29.25
-
2316.2
4th floor
29.25
-
2332.9
Providing wall putty with cement base of approoved quality including cost of all materials , taxes , labour, T&P required for the work complete as per direction of Engineer-in-Charge
-
-
-
Ground floor
6906.62
-
71.4
1st floor
6906.62
-
72.7
2nd floor
6906.62
-
74
3rd floor
6906.62
-
75.4
4th floor
6906.62
-
76.8
5th floor
791.25
-
78.3
Painting 2 (Two) or more coats with Weather Coat Paint of approved Brand / Quality & Colour on the finished external plastered surface using required quantities of paint as specified by the concerned manufacturer to give an even shade over a coat of cement primer in all floors at all height , watering the surface before applying the Weather Coat Paint and curing for the required period including cost, coveyance, loading , unloading ,stacking and taxes of all Materials, cost of all Labour, Sundries ,Scafffolding ,Staging and T&P etc. required for the work complete in all respect as directed by the Engineer-in-charge.
-
-
-
Ground floor
2313.56
-
132.9
1st floor
4503.63
-
135.8
2nd floor
4503.63
-
138.9
3rd floor
4503.63
-
142.1
4th floor
4503.63
-
145.3
5th floor
1910.4
-
148.7
Applying 2 (Two ) coats of Painting with Plastic Emulsion paint over white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete and second coat with Cement Wall Primer of approved make and shade in all floors and at all heights to the interior surface of the wall to make an even finished surface including sand papering, including cost,conveyance, loading, unloading,stacking, taxes of all Materials,cost of all Labour,Scaffoldings, Staging, Sundries, T&P etc.required for the work complete as directed by the Engineer -in -charge.
-
-
-
Ground floor
6906.62
-
138.3
1st floor
6906.62
-
141.3
2nd floor
6906.62
-
144.4
3rd floor
6906.62
-
147.6
4th floor
6906.62
-
150.8
5th floor
791.25
-
154.2
Supplying, Fitting and Fixing M.S Grills / M.S shutter of approved Drawings & Designs made out of M S Flat, Square bars etc. of approved specifications / dimensions with necessary welded clamps fixed in proper position & plumb including a single coat of priming using approved quality metallic primer, making required holes in Massonary Walls / R.C.C Structures (where ever necessary) , grouting the clamps with C.C(1:2:4) with 12mm size black hard crusher broken granite stone chips & making good to the damages of Massonary Walls / R.C.C Structures including cost, conveyance, loading, unloading,stacking, royalties and taxes of all Materials , cost of all Labours, Staging, Scaffolding, Sundries, T&P etc. complete as directed by the Engineer-in-charge.( Weight to be taken up properly prior to fixing the grills in the works and payment to be made accordingly )
-
-
-
Ground floor
10573.35
-
58.3
1st floor
9284.5
-
58.3
2nd floor
9284.5
-
58.3
3rd floor
9284.5
-
58.3
4th floor
11276.71
-
58.3
Painting with Synthetic enamel paint of approved colour, shade and brand like ICI/ Asian/ Berger on Steel work/New wood work in two or more coats as required to give an even shade including an under coat of suitable primer of approved brand and manufacturer including cost of all materials with taxes and transportation, loading, unloading, scaffolding, all labour, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge including filling gaps with putties, scrapping, sand papering and cleaning the surface to make free from rusts, dusts and oily substances before applying primer etc. complete.
-
-
-
Ground floor
497.79
-
192.9
1st floor
498.73
-
199.1
2nd floor
498.73
-
204.1
3rd floor
498.73
-
209.2
4th floor
581.42
-
214.5
Supplying, Fitting and Fixing of Stainless Steel of 304 grade in Handrail using 50mm dia of 2mm thick circular pipe with stainless steel wall mounted short piece in stair case as per approved Drawings, Design and Specification,welding, buffing, polishing etc with cost, conveyance,loading,unloading ,stacking & taxes of all materials,cost of all labour, T&P etc. required for the work complete in all respect in all floors at all height as directed by the Engineer-in charge
-
-
-
Ground floor to 4th floor
2882
-
289.2
Supplying, Fitting and Fixing well dressed and well seasoned Sal Wood Choukaths ( of different length and size i.e 75m.m x 100 m.m OR 62.5x125mm) in proper position & plumb including two coats of coaltaring to the wall and lintel faces of choukaths including cost of coaltar and all labour & T&P charges of coaltaring alongwith fixing required nos. of W.I. clamps to the choukaths with approved qualities of screws in all floors at all height including cost, coveyance, loading , unloading,stacking and taxes of all Materials, cost of all Labour,Sundries, T&P required for the work etc. complete in all respect as directed by the Engineer- in- charge.
-
-
-
Ground floor
1.06
-
50400.8
1st floor
2.44
-
50400.8
2nd floor
2.44
-
50400.8
3rd floor
2.44
-
50400.8
4th floor
2.44
-
50400.8
Providing fiting fixing of 32mm thick flush dor made out of 32mm thick BWR block board covered with 4mm veneer to one side with melamine po0lish with cost of all fixture and material labour etc complete
-
-
-
Ground floor
62.19
-
15582
1st floor
120.99
-
15582
2nd floor
120.99
-
15582
3rd floor
120.99
-
15582
4th floor
120.99
-
15582
Supplying, fitting, fixing up window (sliding type) having powder coated made up aluminum Section 9778 as windows frame section No. 4095,4096 & 9777, 3994 as shutter frame including lucking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.
-
-
-
Ground floor
1077.46
-
604.4
1st floor
1069.88
-
604.4
2nd floor
1069.88
-
604.4
3rd floor
1069.88
-
604.4
4th floor
1145.04
-
604.4
Supplying, fitting, fixing of 5mm thick black glass as panel fitted with rubber bending including lucking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.
-
-
-
Ground floor
220.34
-
665.7
1st floor
218.79
-
665.7
2nd floor
218.79
-
665.7
3rd floor
218.79
-
665.7
4th floor
234.16
-
665.7
Providing and fixing of Partly fixed, partly top hung and partly louvered windows of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS- 513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint pecification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Section for internal top and bottom frames in the louvered areas should be 18 x 40 mm.Top hung shutter should be of 46 x 46 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length , jointed with corner bracket and frames are fixed to the concrete/ masonry wall by means of self expanding screws and glass to be used of 5mm reflective with all taxes etc comoplete.
-
-
-
Ground floor to 4th floor
54.36
-
4326.1
Providing and Fixing of Structural Glazing of approved make to be fabricated from roll formed sections made of pre painted steel (base steel as per Is 513 of 0.6mm thick "D" quality galvanized as per IS 277 with zinc of 120gm per sqm ) with primer of 5-7 5.7 microns thick and finished paint with polyster paint ( Black/pearlwhite/chocolatebrown)of 12-16microns and the sizesof the outer frame being 46x70mm and fixed beading are of 18x25mm sectionsfor internal top and bottom frames inthe louvered area should be 18x40mm top hung should be46x46mm. Accessories/ed beadings are of 18x25mm.accessoriesgaskets are to be used as per the manufacturers supply and specifications like handle being made of high grade alluminium powder coated and with nylon recever and gasket will be made of EPDM all corner brackets are tobe made of CRCA with Zinc phosphating. The mullion caps and louvered clips should be glass filled nylon. The sectionsare to be cut to length jointedand assembled by means of self expanding screws and glass to be used of 6mm thick black glass with all taxes complete
-
-
-
For All Floors floor
45
-
6250.4
Filling in foundation trenches and plinth with excavated earth well watered and rammed in layers not exceeding 23 c.m in depth including all lead and lift, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer- in- charge.
-
-
-
Ground Floor
2421.99
-
112.94
Supplying, fitting and fixing of 100 mm PVC rain water down pipe schedule-40 including cost of all materials,taxes, labour and T&P required for the work.
658.8
-
190
25 mm. thick Grading Concrete of proportion (1:2:2) on top of the Roof Slab using approved quality of cement, 6 mm. size hard crusher broken granite stone chips with screened & washed sharp sand for mortar of approved quality from approved quarry, washed & cleaned, free from all debrises and silt along with providing a layer of waterproofing treatment by using pedicrete (URP/SBR) Latex before grading concret (Mix - Latex @ 0.54 Ltr/Sqm & Cement @ 0.008Qntl /Sqm) including hoisting, lowering and laying concrete in all floors at all height after chipping, chiseling and cleaning the entire roof surface by using wire brush, finished smooth to proper required slope and gradient including cost, conveyance, royalties, loading, unloading,stacking and taxes of all Materials, cost of all Labour, T &P, Sundries, Watering ,Curing etc.required for the work complete in all respect as directed by the Engineer-in-charge.
2322.5
-
460.5
Providing & Sealing the joint with seismic pop up system comprised flexi dust proof gasket confirm to BS4225 on either side of joint s ,mill finish free float centre pan frame and Aluminium base frames confrim to alloy of 6063 T5/T6 including providing of EPDM moisture barrier confirm ASTM2240 7 ASTM-G53 784 fixing by Sanfield Bond confrim to ASTM C-881 complete in all respect as per manufacture Drawing and Specification SAPX-600 (Floor)of all materials and labour T&P etc complete.and as per direction of the Engineer-in-Charge .
28.8
-
11504.7
Providing the joint with 151mm x 1.93mm thick powder coated/Anodized Extruded Aluminum frame to alloy of 6063 T5/T6 Specifications having snap locking clips system complete in all respect as per manufacturer Drawing and specifications. SNPG-600(Internal Wall Location)
120
-
7642.7
Anodized/Powder coated Centre Plate confirm to alloy of 6063 T5/T6 including providing of TWO LAYERS of EPDM moisture barrier confirm to ASTM 2240 & ASTM - G53 & 84 fixing by Sanfield Bond confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. SNJG-600( External Wall Location)
132
-
7949.6
Providing fitting and fixing up 3mm thick Aluminum Composite panel walling made up rectangular aluminum section No. TU 512 of size 50.8 x 25.40mm for frame work of 2’-6” x 4’-0” with 3mm thick ACP (AL-40)including lining the joints with silicon including all fittings, cost, conveyance, taxes of all materials, cost of all labour, labour cess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
-
-
-
All Floors
54
-
4074.8
Supplying fitting, fixing fully glazed aluminum framed open able windows using15 micron anodized OEL aluminum section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tapered clip of section 4125, aluminum angle , rubber beading, friction stay and handle etc. with 5mm black glass. for shelf
1116.44
-
3796.8
Providing fitting fixing of 25mm thick block board for middle partition of Shelf including all lead and lift, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer- in- charge.
535.08
-
1639.5
Providing water proofing to slab & sunken slab by applying zycoseal ,zycoprime, elastobar ,grouting & saeling the pipe and concrete joints etc complete. as per approved specification and direction including cost and conveyance of all materials, cost of labour, T&P, required for the work etc. all complete excluding GST as per the direction of Engineer-in-Charge.
1908.55
-
550
Fitting and fixing vetrified tiles with matt finish Kajaria ( Fog Perla) on floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost conveyance, royalities and taxes etc. all complete as per direction of Engineer in charge. (Ceramic floor tiles of premium grade Kajaria / Somany make of size 600x600mm to be pre-approved by the Engineer in charge)
1564.15
-
1500
Fitting and fixing vetrified tiles of Kajaria (Duren Marfil) to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including cost conveyance, royalities and taxes etc. all complete as per direction of Engineer in charge. (Ceramic wall tiles of Size (Duren Marfil)600x300mm premium grade Kajaria / Somany make special plain / printed series to be pre-approved by the Engineer in charge)
4401.6
-
1500
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm of Darwaja Make or equivalent as per direction of E.I.C. Per Sqm.
453.6
-
6000
DISMENTALING WORK
-
-
-
Dismentalling the old RCC beam ,slab etc and removing the debries away from work site as directed by E.I.C etc complete
-
-
-
Ground Floor
200.06
-
1142.9
First Floor
200.06
-
1200.1
Dismentalling the old brick masonry upto 3.00mtr height and removing the debries away from work site as directed by E.I.C etc complete
-
-
-
Ground Floor
162.12
-
1074.5
First Floor
164.23
-
1128.2
Dismentalling the old Doors ,windows and ventilators and removing the debries away from work site as directed by E.I.C etc complete
-
-
-
Ground Floor
132.08
-
309.1
First Floor
138.76
-
324.5
INTENAL AND ECTERNAL ELECTRICAL WORK
-
-
-
SECTION A: WIRING TO VARIOUS POINTS, PLUG POINTS, AIR CONDITIONER POINTS ETC.
-
-
-
Light Point Point 1Switch - 1 Light
1256
-
1383.27
Light Point Point 1Switch - 2 Light
355
-
2002
Fan Point with 1 Module Regulator step type
509
-
2326.41
Exhaust Fan Point
79
-
2385.42
5Amps., 250 Volts, 2/3 Pin wall socket outlet on independent board
82
-
2147.82
5Amps., 250 Volts, 2/3 Pin wall socket outlet on Same board with other point switches
637
-
940.05
SECTION - B : SUB-MAIN WIRING FROM THE MAIN PANEL TO THE DISTRIBUTION BOARD AND FROM DISTRIBUTION BAORD TO JUNCTION BOXES AND VARIOUS TYPES OF SOCKETS / EQUIPMENTS
-
-
-
Sub-Main 2x2.5 sq-mm (P & N) + 1.5 Sq-mm (E)
11250
-
253.26
Sub-Main 2x4.0 sq-mm (P & N) + 1.5 Sq-mm (E)
2500
-
392.8
SECTION C: FIXTURES SUCH AS VARIOUS COMBINATIONS OF 15/20/25 AMPS SWITCHES AND SOCKETS FOR COMPUTERS, GENERAL PURPOSE SOCKET OUTLETS, HOLDERS FOR LAMPS ETC.
-
-
-
1x32A DP Switch & 1x5/15 Amps Socket
82
-
1232.89
1x32A DP Switch & 3x5/15 Amps Socket
5
-
2080.96
Angle Batten Holder
640
-
73.42
SECTION D: BRANCH DISTRIBUTION BOARD & PANELS
-
-
-
8 Way - 7 SEGMENT - 3Ø-PPI MCB-BDB
20
-
45352.2
Sub Floor Panel at Building in Ground Floor
5
-
73983.76
Main Panel at Near Transformer in Panel Room
1
-
354906.2
100 KVAR Capacitor Panel - Rate only for Quote
1
-
300000
SECTION E: CABLES
-
-
-
50 Sq-mm 3-1/2 Core Cable
1080
-
772.27
50 Sq-mm 3-1/2 Core Cable End Termination
30
-
1939.79
16 Sq-mm 4 Core Cable
650
-
502.8
Cable Trench
180
-
3182.02
SECTION F: EARTHING & LIGHTING ARRESTOR ETC.
-
-
-
Vertical air termination (Lightning Discharge Receiver)
5
-
3179.69
Test Link with GI Box for Lightning Arrrester
5
-
705.7
Earth Bus Bar
5
-
2144.68
25mmx3mm Copper Strip for Earth Connection
1245
-
802.5
No.8 S.W.G. Copper wire
149
-
110.47
Standard Chemical Earthing
45
-
16275.81
SECTION G: INTERNAL LIGHT / FANS / EXHAUST FANS / DUCTED EXHAUST FANS ETC. FITTINGS & FIXTURES
-
-
-
Surface mounted ROUND down LED down lighter of 18 Watts
1030
-
2246.98
LED batten of 40 Watts
664
-
2253.25
10 Watts LED Lamp T Type
275
-
362.58
1200mm Sweep, 5 Star BEE Rating Ceiling Fan
509
-
2886.45
380mm /15 Inch 900rpm Heavy Duty Exhaust Fan 1175 CFM
79
-
4297.43
SECTION H: EXTERNAL LIGHTS, POLES & FIXTURES ETC.
-
-
-
4 Meters Long 50mm Dia Light Pole for Post Top Lantern
20
-
13789.54
DB for Street Light and External Light
1
-
12056.5
6 Sq-mm 2 Core Cable
250
-
519.21
Coil Earthing
10
-
304.19
Cost of Compact Sub-Station with allied work
1
-
3500000
Cost of 250 KVA Set with Allied Work
1
-
3500000
Cost of Electrical Room of 180 Sft @ Rs.1500/- per Sft
1
-
270000
INTERNAL AND EXTERNAL PH WORK
-
-
-
SUB HEAD -1- PART-A- SANITARY FIXTURE & FITTINGS
-
-
-
Providing and fixing white glazed vitreous china floor mounted water closet (European pattern) 'P' or 'S' type with 3/6 liter capacity PVC low level dual flushing cistern of approved make, As per IS-2556 with ISI mark, including supply of sutaible PVC wall plug and Brass screws PVC seat cover (solid) with hinges & rubber buffers,40 mm flush bend & CI bracket etc. all complete including panting of brackets cutting and making good the wall and floor whenever required Make : HINDWARE/JAQUAR
110
-
18004.81
Providing and fixing of 555mmx425mm white glazed vitreous china under counter wash hand basin of approved make with supply & fixing of 15 mm cp brass self closing pilar cock, 32mm CP waste,15mm dia cp water connection pipe, basin bolts & Nuts of approved quality including cutting and making good the wall and floor whenever required(Make:HINDWARE/JAQUAR)
140
-
10528
Providing and fixing of 500mmx400mm white glazed vitreous china wall hung wash hand basin of approved make with supply & fixing of 15 mm cp pillar cock, 32mm CP waste,15mm dia PVC water connection pipe, basin bolts & Nuts of approved quality including cutting and making good the wall and floor whenever required .(Make:HINDWARE/JAQUAR)
6
-
11498
Providing and fixing of 265mm x 315mmx 440mm white glazed vitreous china flat back, lipped front standing urinal basin as per IS-2556 with ISI mark along with supply & fixing of 32 mm doom waste,15 mm spreador,15 mm flush cock, 15 mm cp connector . including cutting and making good the wall and floor whenever required(Make:HINDWARE/JAQUAR)
105
-
18207
Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm
4
-
17766
Providing and fixing C.P. brass angle valve for basin and sink points of 15mm nominal bore(Make:HINDWARE/JAQUAR)
280
-
1468
Providing and fixing 15 mm C.P brass bib cock of approved quality (Make:HINDWARE/JAQUAR)
110
-
1928
Providing and fixing brass 2 in 1 bib cock of approved quality :
110
-
2530
15 mm nominal bore (Make:HINDWARE/JAQUAR)
-
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and
102
-
2608
of approved make conforming to IS:8931. 20 mm nominal bore(Make:HINDWARE/JAQUAR)
-
-
-
Providing and fixing C.P brass 2 in 1 wall mixer with provision of over head shower with 115 mm long bend pipe(Make:HINDWARE/JAQUAR)
102
-
7384
Providing and fixing C.P brass swivelling shower,with arm 15 mm nominal bore
102
-
5369
Providing and fixing CP Brass 32 mm size wash basin p-Trap of approved quality (Make:HINDWARE/JAQUAR)
260
-
1212
Providing and fixing Health Faucet with 1m long PVC tube & wall hook (Make:HINDWARE/JAQUAR)
110
-
1625
Providing and fixing C.P brass swivelling table mounted sink cock 15 mm nominal bore (Make:HINDWARE/JAQUAR)
4
-
3232
Providing and fixing C.P Floor grating of approved quality and colour. 125 mm dia Circular type
400
-
274.68
Providing and fixing soap Dish Holder
108
-
293
Providing and fixing robe hook
108
-
419
Providing and fixing 15mmx 65mm long extension piece
800
-
61.25
Providing and fixing 300 lit floor mounted geyser
16
-
87766
PART-B WATER SUPPLY PIPE
-
-
-
WATER SUPPLY PIPE
-
-
-
Providing and fixing of of following nominal dia CPVC pipes S.D.R - 13.5 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw etc. including testing the joints with required water presure. SUPREME/ASTRAL/ASHIRVAD
-
-
-
Concealed water supply pipe
-
-
-
20 mm dia
800
-
565
25 mm dia
500
-
684
32 mm dia
400
-
921
Providing and fixing of of following nominal dia CPVC pipes S.D.R - 13.5 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw etc. including testing the joints with required water presure. SUPREME/ASTRAL/ASHIRVAD
-
-
-
water supply pipe inside duct, roof and toilet celing lvl
-
-
-
20mm dia
250
-
318
25mm dia
350
-
417
32mm dia
150
-
593
40mm dia
100
-
775
50 mm dia
250
-
1186
Providing and fixing of of following nominal dia CPVC pipes sch-40- per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw etc. including testing the joints with required water presure. SUPREME/ASTRAL/ASHIRVAD
-
-
-
65 mm dia
200
-
2348
75 mm dia
150
-
3066
100 mm dia
70
-
4431
Providing and fixing gun metal gate valve with C.I. wheel of (screwed end) approved quality(Make:NVR/ZOLOTO)
-
-
-
20mm dia
10
-
1019
25mm dia
10
-
1495
32mm dia
12
-
2176
40mm dia
10
-
2894
50 mm dia
15
-
4410
65 mm dia
8
-
7456
75 mm dia
10
-
10678
100 mm dia
4
-
20853
Providing and fixing Cast iron dual plate check valve (flanged type) approved quality(Make:NVR/ZOLOTO)
-
-
-
65 mm dia
2
-
1499
PART -C DRAINAGE INSIDE TOILET AND DUCT
-
-
-
Providing and fixing of UPVC SWR pipes (Type-b ,Ring type) rain water pipe fittings like bend, shoe, clamp, etc.from roof up to Ground Level, the cost inclusive of pipe, fittings, all labour & materials etc. all complete as per direction of EIC. Make : ASTRAL/SUPREME /ASHIRVAD
-
-
-
40mm dia
320
-
841
Providing and fixing of UPVC SWR pipes (Type-A ,Ring type) rain water pipe fittings like bend, shoe, clamp, etc.from roof up to Ground Level, the cost inclusive of pipe, fittings, all labour & materials etc. all complete as per direction of EIC. Make : ASTRAL/SUPREME /ASHIRVAD
-
-
-
110mm dia PVC pipe
180
-
668.99
Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes (Type-B , ring type ) of approved make confirming to IS-13592/1992, fixing on wall surface inside duct and inside in all toilet, including all taxes, duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge. Make : ASTRAL/SUPREME /ASTRAL
-
-
-
110mm dia
1200
-
1012
75mm dia
300
-
699
Supplying all materials, labour, T&P, fitting and fixing of following dia UPVC SWR fittings of approved make confirming to IS-14735 with all taxes, duties, transportation & requisite testing as per specification & direction of Engineer-in-charge. Make : ASTRAL/SUPREME /ASTRAL
-
-
-
110mm dia Single y with out door
700
-
765
110mm dia y with door
120
-
895
110mm dia swept tee with door
90
-
753
110 mm x 75 mm reducing y with out door
430
-
648
75mm dia y with out door
150
-
558
100 mm 87.5 deg door bend
150
-
656
100 mm 87.5 deg plain bend
200
-
442
100 mm 45 deg bend
430
-
398
110mm x 110mm P Trap
280
-
996
110mm x 75mm bell mouth P Trap
180
-
989
Split Clamp suitable for 75 to 110 mm dia pipe
600
-
442
Split Clamp suitable 50 mm dia pipe
300
-
378
Split Clamp suitable 40 mm dia pipe
300
-
372
Split Clamp suitable 32 mm dia pipe
200
-
370
Split Clamp suitable 25 mm dia pipe
200
-
368
Split Clamp suitable 20 mm dia pipe
200
-
368
Split Clamp suitable 20 mm dia pipe
200
-
364
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
10
-
244.05
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
300
-
344.6
Providing and fixing M.S. puddle flanges fabricated of 750 mm long pipe pieces to R.C.C. water tanks wall / slab. The entire fitting shall be hot dipped galvanised
-
-
-
50 mm dia (Screwed ends MS plate 6 mm thick; 100 mm x 100 mm plus dia of pipe).
10
-
1000
65 mm dia (Flanged ends MS plate 6 mm thick; 100 mm x 100 mm plus dia of pipe).
6
-
1200
80 mm dia (Flanged ends MS plate 6 mm thick; 100 mm x 100 mm plus dia of pipe).
8
-
1500
100 mm dia (Flanged ends MS plate 6 mm thick; 100 mm x 100 mm plus dia of pipe).
3
-
3000
Providing and fixing electronic type level indicator for water tanks mounting in panel with the following features, level display, alarm when water level is low or high, full range from one level to four level display and manual reset for Alarm etc. with electrical wiring conduit supports from wall & ceiling probes and all other accessories complete as required.
3
-
30000
Providing, fitting & fixing pvc rung 200 mm X 300mm (inside water tank.)etc. all complete as per direction of Engineer-in-charge.
100
-
300
Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including disposal of malba
50
-
180.15
PART -D STP
-
-
-
MECHANICAL
-
-
-
Design, supplying, installing, testing & commissioning of Sewage Treatment Plant of capacity 70 KLD (excluding all Civil & construction work) for the following duty:
-
-
-
Nature of Sewage - Domestic Sewage,
-
-
-
Daily average flow -70 cum/day
-
-
-
pH - 6.5 – 8.5
-
-
-
BOD5 - upto 300-400 Mg/L
-
-
-
S. Solids - 100-250 Mg/L
-
-
-
COD - upto 600 –800 Mg/L
-
-
-
Oil & Grease - 30 Mg / L
-
-
-
Coliform - 106 - 107 MPN/100 ML
-
-
-
Sewage discharge standard after treatment
-
-
-
PH - 5.5-9.0
-
-
-
BOD5 - Less than 20 Mg/L
-
-
-
S. Solids - Less than 20 Mg/L
-
-
-
COD - Less than 50 Mg/L
-
-
-
Coliform – traces
-
-
-
Supply, installation, testing & commissioning of 1 No Stainless Steel Perforated, 6mm perforated Bar Screen with suitable lifting arrangement with brackets in the sreen sump of (size 1000 mm x 2500mm depth approx), SS-304
1
-
20000
Supply, installation, testing & commissioning of electronic type level indicator, instrumation and controller for automatic operation of the system with high/low level alarm complete with auxillary NO/NC contacts. Contractor shall ensure submission of detailed GA drawings (Plan & Section), P & I diagram, schematic diagram for the above mentioned component and additional component if so required for the complete working of the STP.
2
-
13000
Supply, installation, testing & commissioning of non clogging type Mono-block sewage transfer pumps capable of handling solids upto 25 mm having C.I casing & Bronze impeller complete with all accessories, motor of required capacity, Pressure gauge on delivery line with isolation cock, level controller (with wiring) to control the level of sump automatically Capacity 3-5 M3/hr each , 1 set = 2 Nos.(1 working + 1 standby)
1
-
50000
Head 10-15 Mts
-
-
-
Power 1Hp
-
-
-
RPM 2900
-
-
-
Make- CG/ KIRLOSKAR/WILLO/LUBI
-
-
-
Supply, installation, testing & commissioning of non clogging type Mono-block sludge transfer pumps capable of handling solids upto 25 mm having C.I casing & Bronze impeller complete with all accessories, motor of required capacity, Pressure gauge on delivery line with isolation cock, level controller (with wiring) to control the level of sump automatically Capacity 2-3 M3/hr each ,1 set = 2 Nos.(1 working + 1 standby)
1
-
40000
Head 10-15 Mts
-
-
-
Power 0.5 Hp
-
-
-
RPM 2900
-
-
-
Make- CG/ KIRLOSKAR/WILLO/LUBI
-
-
-
Twin lube type rotary air blowers with 1450 rpm suitable motor (1W + 1Sb) capable of delivering 80 cum/hr ( 2 nos. ) of free air at 0.4 kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable 3 HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply. complete with silensors,filters ,NRV,SV and divert valaves,Vibration pads etc complete with all acessories 1set= 2 Nos ( 1 working + 1 standby),
1
-
300000
Make-A1 /EVEREST / AIRVAK /AKASH
-
-
-
Motor Make-SIEMENS/CROMPTON/KIRLOSKAR
-
-
-
Supplying, installing, testing and commissioning, of fine bubble diffuser along with membrane of silicone membranes, PVC support pipe(10 ksc pressure rating),PVC fitting, nylon rope braided hose with all accessories to make it retrievable & to provide clog-free oxygen for Aeration Tanks.
12
-
3000
MBBR Media Module as per std specification and detailed drawing and technical spec, quantity required as designed (approx 4.0-m3 each ) with support rest etc for the proposed MBBR directed by engineer in charge at site
4
-
25000
Make-- COOLDECK/MM AQUA/WELCOME MARKETING
-
-
-
Hexagonal Tube settler with MSEP rack support and open able bracket /MH and support frame for clarifier unit of size 750 mm long and with end locking arrangement ,the inclination of 51’ is required ,end lock sud have the surface locking arrangement in rack etc (media min approx 4m3) with all fittings and fixtures as required for clarifier as directed by engineer in charge at site.
4
-
15000
Make-- COOLDECK/MM AQUA/WELCOME MARKETING
-
-
-
Piping (heavy class) in MS/GI/SS/UPVC/HDPE as per the approval of the consultants, to be designed for suitable and corrosion resistance complete or as directed by engineer in charge at site
1
-
100000
MS PIPE MAKE -JINDAL/TATA
-
-
-
UPVC PIPE AND FITTINGS -- SUPREME/ASHIRBAD/FINOLEX
-
-
-
TERTIARY TREATMENT PLANT
-
-
-
Supplying, installing, testing and commissioning of horizontal single/multistage centrifugal filter feed pump complete ,impeller CI casing . Each pump shall have TEFC 2900 RPM three phase electric motor. The pump shall have cast iron head, base plate SS Shaft/ Impeller/ Intermediate chamber. Pump shall be provided with mechanical seal. The pump shall be suitable for auto/ manual operation. of capacity 4 M3/hr @ 35 MWC.(1 W + 1 St by ) MONO-BLOCK PUMP,1 set = 2 Nos.(1 working + 1 standby)
1
-
50000
Head 30-35 Mts
-
-
-
Power 1.5 Hp
-
-
-
RPM 2900
-
-
-
Make- CG/ KIRLOSKAR/WILLO/LUBI
-
-
-
Providing, fixing, testing & commissioning of FRP COMPOSITE Tertiary filtration plant MULTI GRADE FILTER (suitable for 3.5 Kg/Sqcm working pressure) complete with initial charge with Gravels/pebbles/sand /silex media , Multi-port valves with built in frontal pipe work with back wash system, pressure gauge at inlet, outlet and back wash (each with isolation cock), valves, fittings associated works.
1
-
127000
Pr Vessel MOC – FRP COMPOSITE
-
-
-
Pr Vessel dia/hos – 600 x 1800
-
-
-
Back Wash Period 12 Hrs.
-
-
-
Operating Pressure 3 Kg. per sq.cm
-
-
-
Test Pressure 7.5 Kg. Sq.cm.
-
-
-
Capacity 4 m3/Hr
-
-
-
Make- ION EXCHANGE/THERMAX/HITACHI
-
-
-
Providing, fixing, testing & commissioning of FRP COMPOSITE water filtration plant ACTIVATED CARBON FILTER (suitable for 3.5 Kg/Sqcm working pressure) complete with initial charge with Gravels/pebbles/Activated carbon , Multi-port valves with built in frontal pipe work with back wash system, pressure gauge at inlet, outlet and back wash (each with isolation cock), valves, fittings associated works.
1
-
146000
Pr Vessel MOC – FRP COMPOSITE
-
-
-
Pr Vessel dia/hos – 600 X 1875
-
-
-
Back Wash Period 12 Hrs.
-
-
-
Operating Pressure 3 Kg. per sq.cm
-
-
-
Test Pressure 7.5 Kg. Sq.cm.
-
-
-
Capacity 4 m3/Hr
-
-
-
Make- ION EXCHANGE/THERMAX/HITACHI
-
-
-
Supply, installation, testing & commissioning of Hypochloride dosing system for tertiary water treatment with 100 L . HDPE/PVC tank with lid etc
1
-
15000
Capacity of the dosing Pump - 0-6 LPH
-
-
-
Pressure- 4 Kg/cm2
-
-
-
Stroke per minute-55
-
-
-
Make- Kanakdhara/Milton Roy/E-dose
-
-
-
ELECTRICAL INSTALLATION FOR STP
1
-
80000
Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre shall be fabricated out of 14 gauge CRCA sheet steel in form in 3b formation with reinforcement of suitable size angle iron, channel ‘T’ sections irons and/or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Cadmium Plated hardware shall be used in fabrication of panels. Quoted rates shall inclusive of cables (in accordance to specification) with earthing from panel to each motor /STP Motor Control Centre.
-
-
-
Incoming Distribution panel with bus bar etc as std required.
-
-
-
MCC for STP as described above
-
-
-
CABLE & CABLE TRAYS
-
-
-
Supplying & laying of following 1100 volt grade PVC sheathed aluminum/copper conductor armoured cables as per specification in existing trenches, cable trays, ducts over bed of sand, clamped to wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning. as site suitable quantities as per site.
-
-
-
4 core 4 sq. mm copper cable
-
-
-
8SWG Cupper wire
-
-
-
Make- L&T/SIEMENS
-
-
-
A. Complete Commissioning of Sewage treatment plant with UREA, DAP, COW DUNG, BIO-Culture, Man power along with tools and tackles for 20 days.
B. 1 Year Mentainance free service and replacement warranty (But excluding man power, consumables, electrical Etc.)
C. Inlet and Outlet parameters test report after succesful commissioning from pollution board approved laboratory.
1
-
50000
SUB HEAD-2 EXTERNAL PH
-
-
-
Excavating trenches of required width for pipes, cables, etc including excavationfor sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, includin ggetting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming,watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m
430
-
364
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete
-
-
-
150mm dia pipe
200
-
500
200 mm dia pipe
200
-
794
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design
-
-
-
150mm dia pipe
200
-
999
200 mm dia pipe
200
-
1164
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design
-
-
-
150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
20
-
3129
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Chamber of internal size 900mm x800mm
20
-
10905.05
Chamber of internal size 900mm x1200mm
8
-
22939.65
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
12
-
5209.1
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 560 mm internal diameter
10
-
1471.5
Design, construction, testing & comimissioning of Sewage Treatment Plant (STP) capacity 70 KLD with MBBR technology with Bar Screen,Level Sensors, Diffuser(Tube Type), Blower( Twin Lobe Design),Secondary Tube settler,Feed Pumps for tertiary treatment, MGF,ACF,Butterfly valves,Pressure gauge etc. All complete as per PH Specification & direction of EIC.Including carrying out all Mechanical and Electrical work with Tertiary Treatment to make the sewage treatment plant operational so that the outlet parameter shall satisfy the pollution control board norms for treated water fit to be re-used or discharged to storm water drain.STP shall operate in Aerobic process for the following details
1
-
1416000
Supplying, installing, testing and commissioning of centrifugal openwell submerssible horizontal horizontal end suction pumps for supplying water from ugr to over head tank The pump shall have cast iron delivery casting , cast iron impeller SS Shaft. Pump shall be provided with mechanical seal (gland packing).The pump shall be suitable for auto/ manual operation shall be provided with dry running protection and N.R.V. at delivery.all complete
1
-
192830
pump (1 working + 1 stand by)
-
-
-
Purpose=Supplying of ugr water to over head tank
-
-
-
Location - Inside ugr
-
-
-
Flow rate of each pump =20 cum/hour
-
-
-
Head of each pump= 35 met
-
-
-
Motor=7.5 hp
-
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata,preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level
-
-
-
All types of soil
-
-
-
300 mm dia
90
-
512.3
Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
-
-
-
150 mm nominal size dia
50
-
690.75
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
150 mm nominal size dia
35
-
746.15
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
0.34
-
1497.7
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
6
-
857.6
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
-
-
-
150 mm dia
1
-
210.75
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
-
-
-
150 mm clamp
1
-
1489.8
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
-
-
-
150 mm dia
2
-
280.95
UNDER GROUND WATER TANK (15000 LTR.)
-
-
-
Earth work in oridinary soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge
63.43
-
137.37
Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge
2.88
-
332.7
Providing and laying plain cement concrete 1:4:8 (1 part cement: 4 parts coarse sand: 8 parts of graded stone aggregate 40mm max. size) in foundation, footing for columns, floor (sub base), including from work, mixing, placing, compacting, curing etc. all complete as per specification and directed by the Engineer.
1.83
-
5372.9
R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying
-
-
-
Foundation
2.75
-
4665.7
Lintel
0.65
-
8135.6
Column & Beam
1.29
-
10279.4
Roof Slab
2.37
-
8732.6
Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete.
-
-
-
Foundation
101.3
-
109.12
Slab
18.99
-
425
Supply and placing in position high yield deformed bars reinforcement (conforming to IS: 1139)/Cold Twisted deformed bars reinforcement (conforming to IS: 1786), for RCC work including the cost of steel straightening, cleanning, decoiling, cutting, bending to required shapes and lengths as per details, binding with contractor's own 16 SWG blck soft annealed binding wire at every intersection.
-
-
-
Column Base ,Lintel,Chajja,Column & Beam,Roof Slab
9.57
-
8049.9
Providing and laying 1st class brick masonry work in cement mortar 1:6 (1 cement : 6 coarse sand) as per specifications in one or more brick thickness and in any shape including providing recesses, opening, scaffolding, staging, curing, finishing the joints flush below ground level and raking out joints in and above plinth level.
-
-
-
In Sub structure Foundation
11.94
-
3983.9
Providing 12mm thick cement plaster in mortar 1:6 (1 cement : 6 coarse sand) on exposed brick masonry or concrete surface, including provision of groove wherever necessary, curing and cost of scaffolding, leveling in prefect vertical plane, complete in all respect as directed by site engineer. (Inside)
-
-
-
Plastering Inside
47.75
-
130.1
Providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry Treatment, concrete surface, including provision of groove wherever necessary, curing and cost of scaffolding, leveling in prefect vertical plane complete
16.66
-
157.3
Providing cement punning on newly plstered surface wherever necessary, curing and cost of scaffolding, leveling in prefect vertical plane, complete in all respect as directed by site Engineer
57.12
-
186.8
Providing & laying 2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm & down grade size hard broken granite chips for new work.
18.99
-
460.5
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor
18.99
-
7949.6
FIRE FIGHTING WORK
-
-
-
(A) FIRE FIGHTING SYSTEM
-
-
-
Centrifugal type Boosting Fire pump of capacity 1300 LPM @ 30 M.(20 HP) head with Class-A Insulation, 50 Hz.,415 V Three Phase Induction Motor , 2880 RPM, complete with all associated accessories.(Kirloskar/WILO)
1
-
85000
common control panel for Electrical motor driven pump.Automatic Starter Panel for all the boosting fire pumps, complete in all respect. (Havells/L & T/BCH)
1
-
32500
Wiring of power cabling as required for establishing automation of the pumping system. (Polycab/finolex/kei/Havells) .
2
-
18000
SS Hydrant Valve / Landing valve, of 63 mm NB size, type-A, single headed , oblique tyep, as per IS :5290/93.(Fireshield/KK FIRE)
20
-
7500
SS short branch pipe with 63 mm male inlet and 19 mm outlet nozzle, as per IS:903 (Fireshield/KK FIRE)
20
-
2800
ISI marked RRL Fire Hose fitted with SS male & female coupling complete by GI wire binding, size: 63 mm NB and 15 meter long each.(Fireshield/KK FIRE)
34
-
7200
MS Hose Box single door for RRL Hose of suitable size to accommodate 1no. of 30 mtr long fire hose and a branch pipe, wall mounted type.(Fireshield/KK FIRE)
20
-
5500
Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 19 mm dia. and 30 mtrs. long with self closing shut-off nozzle. (Fireshield/KK FIRE)
18
-
9500
C. I. Butterfly valve as per IS:5321 with matching flange .(Kartar)
-
-
-
100mm NB
18
-
6500
C. I. Check valve as per IS:5321 with matching flange .(Kartar)
-
-
-
100mm NB
12
-
14000
25mm NB Ball valve with all accessories.
(SKM Plus)
25
-
2500
2 - way fire brigade connection. (Fireshield/KK FIRE)
8
-
9500
Medium grade MS Pipe as per IS: 1239 with all fittings and accessories.(jindal)
-
-
-
100 mm NB
250
-
1850
25 mm NB
20
-
650
Pressure Gauge (H Guru)
8
-
3500
Pressure Switch (Indfoss/Danfoss)
8
-
5200
Automatic Air Release Valve.
8
-
3200
Structural Steels as required for making of supports etc. to make the system complete.
380
-
350
(B) ADDRESSABLE FIRE ALARM SYSTEM
-
-
-
SITC of Microprocessor based Addressable 4 Loop main Fire Alarm Control Panel with Battery. (Honeywell Morley IAS)
2
-
185000
SITC of Addressable Smoke Detector complete with base. (Honeywell Morley IAS)
950
-
3500
SITC of Addressable Hooter complete with base. (Honeywell Morley IAS)
30
-
8500
SITC of Addressable Manual Call Point with Base. (Honeywell Morley IAS)
30
-
7500
SITC of Armoured fire alarm cable 2 x 1.5sqmm incluiding all accessories. (Polycab)
9100
-
150
(C) FIRE EXTINGUISHERS SYSTEM
-
-
-
Supply, installation, testing and commissioning ISI marked (IS:2878) Fire Extinguisher, Carbon-di-oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 and walll suspension braket as required as per specifications.(Eversafe)
50
-
7500
Supply, installation, testing and commissioning ABC (Powder Type) 6 Kg.Capacity Fire Extinguisher. Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:1349-1993 as required as per specifications.(Eversafe)
120
-
4800
TWO WAY TALK BACK SYSTEM (D)
-
-
-
Providing ,fixing , testing and commissioning of 24 Zone Talk back controller made of CRCA sheet housing and rack as required. The Controller shall be micro processor based priority module , mixing amplifier, all call / call back facility with key pad, power supply unit & goose neck micro phone etc complete as per the technical specifications. The Console shall have minimum of 8 hrs battery back up and it should also work on AC single phase power. The Controller shall be as per the technical specifications.
1
-
76000
Providing ,fixing , testing and commissioning of B-class Amplifier of 180W RMS out put in rack, including necessary control wires, jocks etc. complete as per the technical specifications.
1
-
28990
Providing ,fixing , testing and commissioning of 6W two way talk back Speakers WITH talk back switch made of CRCA sheet fabricated and of wall mounted type with required junction boxes and complete fixing accessories.
35
-
1350
Providing ,laying , testing and commissioning of 2C x 1.5 sq.mm twisted pair armoured copper cable confirming to IS standards and specifications. The quoted rate shall inclusive of suitable saddles, hardware etc, complete
2800
-
120
LIFT INSTALATION
-
-
-
16PX-SS BODY-1.75M/SEC 16 Passenger Elevator, 5 stops without machine room as per specificationKONE I MonoSpace (price validity 12 months)
8
-
2500000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements