State Agricultural Marketing Board Tender

Providing and laying PCC (1:3:6) in foundation & plinth using 40mm size crusher broken HG metal of approved quality from approved quarry including hoisting, Lowering and laying concrete to the required level ramming, watering & curing etc complete including cost conveyance of all materials with all taxes and royalties all labour with sundries T&P including hire and running charges of machineries required for the work etc complete in all respect and as per the direction of Engineer-in-charge.

C.C (1:2:4)with 12mm size HG chips of approved quality from approved quarry including hoisting. Lowering and laying concrete to the required level ramming, watering & curing etc complete including cost conveyance of all materials with all taxes and royalties all labour with sundries T&P including hire and running charges of machineries required for the work etc complete in all respect and as per the direction of Engineer-in-charge.

Providing Fly Ash brick masonry work in Foundation & Plinth with fly ash bricks 25cm x12 cm x8 cm tolerance of ± 2% size bricks having crushing strength not less than 75 kg/cm2 with cement mortar 1 cement: 6 sands with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge.

Providing, lifting, hoisting and laying Reinforced Cement Concrete of M-20 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair case, jali , shelves and slab etc as per approved designs and drawings having a minimum compressive strength ( in work test) 20N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days including, centering and shuttering then after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost etc. complete as per direction of Engineer-in-charge. (A) COLUMN AND BEAM

(B) PLINTH BAND

(C) COLUMN BASE

Cutting,Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance,loading, unloading & taxes of M.S plain/HYSD/TMT reinforcement bars and binding wires of 18 to 20 gaugo required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S plain/HYSD/TMT reinforcement bars consumed in the work only. (A) GROUND FLOOR

Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with cement and screened & washed sharp sand for mortar and finished smooth to the rough surface of the brick masonry wall after racking out joints (along with providing grooves wherever necessary) including watering and curing rounding of corner etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost all labour, T & P, sundries and scaffolding required for the work etc as directed by the Engineer in charge.

Supplying fitting and fixing of precoated Galvanized iron profile sheet semi gloss of 1000mm width and total coated thickness 0.45mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties including fixing of ridges valleys,wind ties etc. complete including cost of sheet and all fitting,all taxes labour,T&P etc.complete as per direction of Engineer-in-charge.

Supplying, fabricating, fitting, fixing & erection of M.S Anglur/Tubular truss including all cost, convenyance, taxes etc. complete as per direction of Engineer-in-charge.

Supplying, fabricating, fitting, fixing & erection of purlins including all cost, convenyance, taxes etc. complete as per direction of Engineer-in-charge.

Inserting bituminous expansion joints Board 12 mm. thick of depth 0.075 m. including cleaning, all cost, conveyance, labour, taxes etc. complete as per direction of Engineer-in-charge.

Cost of J hooks, washer & nuts etc.,5/8"X21/2'' nut & bolt for trusses & purlins including all cost, convenyance, taxes etc. complete as per direction of Engineer-in-charge. (market rate)

Supplying fitting and fixing of holding down bolts(600mm X 200mm) & base plate of 8mm thickness including all cost, convenyance, taxes etc. complete as per direction of Engineer-in-charge. (market rate)

Cost, conveyance and labour for spreading stone screened dust and consolidation with PRR including watering, cost and conveyance of screen stone dust including all cost, conveyance, royalities, taxes etc. complete as per direction of Engineer-in-charge.