ST And SC Development Minorities And Backward Classes Welfare Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
ST And SC Development Minorities And Backward Classes Welfare Department Tender
Civil And Construction
Eprocure
Opening Date11 Oct 2021
Closing Date25 Oct 2021
Tender Amount₹ 2,77,39,456
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_STSCD_71697_7Bid Award Id
ViewTender No
ITDASNG-04/2021-22Tender Authority
ST And SC Development Minorities And Backward Classes Welfare Department ViewPurchaser Address
-Website
http://http://www.stscodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Stoney earth
64.3
-
287.9
Hard Rock.
21.43
-
2032
Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-In-charge.
287.22
-
135.53
Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of Engineer-In-charge.
-
-
-
Ground Floor
267.31
-
319.42
Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
-
-
-
Ground Floor
373.12
-
160
Providing and laying plain cement concrete 1:3:6 (1 cement : 3 sand : 6 stone agregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc. complete all depth and height.
-
-
-
Ground Floor
31.58
-
4878.46
Providing and laying plain cement concrete 1:3:6 (1 cement : 3 sand : 6 stone agregate 12mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc. complete all depth and height.
-
-
-
Ground Floor
37.31
-
5505.76
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. at all floors and all heights.
-
-
-
Ground Floor
75.46
-
4034.33
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. at all floors and all heights.
-
-
-
Ground Floor
102.77
-
4072.66
First Floor
150.81
-
4332.2
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:4) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. at all floors and all heights.
-
-
-
Ground Floor
4.23
-
4265.18
First Floor
4.23
-
4524.76
Providing, lifting, hoisting and laying Reinforced cement concrete of M-250 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. at all floors and all heights.
-
-
-
a)Footing
66.19
-
5526.77
b) Grade Beam/Tie beam
27.62
-
5885.44
c) Column.
-
-
-
Ground Floor
23.23
-
11144.12
First floor
25.9
-
12391.52
d) Lintel
-
-
-
Ground Floor
4.4
-
9025.76
First floor
4.37
-
9844.97
e) Chajja
-
-
-
Ground Floor
1.79
-
5840.8
First Floor
1.79
-
6016.65
f) Roof Beam
-
-
-
Ground Floor
27.62
-
11144.12
Ground Floor
31.73
-
12391.52
g) Roof Slab
-
-
-
Ground Floor
53.38
-
9601.75
Ground Floor
57.13
-
10537.32
h) Staircase
-
-
-
Ground Floor
5.73
-
10675.34
First Floor
5.73
-
11827.78
Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding ( Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-in-charge Cold Twisted bars, Thermo-Mechanically-treated bars complete at all floors and all heights.
-
-
-
Ground Floor
252.98
-
7640.67
First Floor
169.21
-
7663.85
12mm cement plaster on external RCC/brick surfaces in cement plaster 1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.
-
-
-
Ground Floor
399.07
-
133.7
First Floor
677.91
-
139.08
16mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.
-
-
-
Ground Floor
675.55
-
191.12
First Floor
735.52
-
195.91
6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1 cement : 4 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.
-
-
-
Ground Floor
373.12
-
149.91
First Floor
441.21
-
153.68
Providing and laying Vitrified floor tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.
-
-
-
Ground Floor
373.12
-
942.25
First Floor
301.49
-
951.86
Providing and laying Vitrified skirting tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 12 mm thick cement mortar 1:3 (1cement: 3coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of EIC at all floors and all heights.
-
-
-
Ground Floor
26.87
-
1027.73
First Floor
26.87
-
1027.73
Providing and laying Matte Finish Vitrified floor tiles 300x300 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1cement:4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.
-
-
-
Ground Floor
29.89
-
894.7
First Floor
29.89
-
904.48
Providing and fixing 1st quality Ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) minimum thickness 5mm of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make in all colours, shades except burgundy, bottle green, black of size 300x200 in skirting and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per direction of Engineer-In-Charge. In all floors and all heights.
-
-
-
Ground Floor
130.6
-
761.77
First Floor
101.05
-
776.23
Providing and fixing 20mm thick Granite stone flooring (sample of Granite stone should be approved by EIC) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish and groove in staircase where required etc. complete as per direction of Engineer-in-charge. In all floors and all heights.
-
-
-
Ground Floor
58.4
-
2032.7
First Floor
58.4
-
2042.3
TATA Pravesh Window
-
-
-
Ground Floor
8
-
29368.88
First Floor
9
-
29368.88
TATA Pravesh Ventilator
-
-
-
Ground Floor
6
-
12287.88
First Floor
6
-
12287.88
TATA Pravesh Door
-
-
-
Ground Floor
7
-
25203.32
First floor
8
-
25203.32
Supplying fitting and fixing Fibre Reinforced Polymer FRP composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwiched core, so as to impart monolithic composite structure as per approved technology (DST) to satisfy IS: 4020 door testing performance criteria including necessary ISI :Aluminium hinges & brass screws as approved by EIC. Standard size 75mm X 100 mm
-
-
-
Ground Floor
24.75
-
450
First Floor
24.75
-
450
Supplying fitting and fixing Fibre Reinforced Polymer FRP composite door shutter with hinge as per approved section with glass fibre reinforced plastic moulded skins and a special sandwiched core, so as to impart monolithic composite structure as per approved technology (DST) to satisfy IS: 14856 door testing performance criteria including all complete, as approved by EIC.
-
-
-
Ground Floor
7.88
-
2750
First Floor
7.88
-
2750
Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (All steel sections contractor's own supply) at all floors and all heights.
-
-
-
Ground Floor
704.7
-
68.73
First Floor
700.2
-
68.73
Providing & Applying priming one coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete at all floors and all heights.
-
-
-
Ground Floor
1447.74
-
58.19
First Floor
1854.64
-
59.63
Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-charge at all elevations including all material labour complete at all floors and all heights.
-
-
-
Ground Floor
399.07
-
61.33
First Floor
677.91
-
62.49
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete at all floors and all heights.
-
-
-
Ground Floor
1048.67
-
84.69
First Floor
1176.73
-
86
Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. including interior wall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge at all floors and all heights.
-
-
-
Ground Floor
1048.67
-
76.4
Ground Floor
1176.73
-
77.9
Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour complete at all floors and all heights.
-
-
-
Ground Floor
26.02
-
89.99
First Floor
26.02
-
91.54
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well ramed, consolidated and grouted with fine sand and finishing the top smooth including shuttering at the edges, excavation and disposing of surplus earth with a lead of 100m complete as per direction of Engineer-in-charge.
-
-
-
Ground Floor
54.75
-
509.99
Providing waterproofing for Toilet/SukenSlab:- Cleaning the inside surface & & Application of two coats of sika Top seal 109 hi @ 2.2 Kg/Sqm & Sika Fab-1 to the battom slab & side wall surface to protect against leakage & seepage finally covered with a cement mortar (1:4). Proper care should be taken to fill the pipe penetration points with sikagard 694 fi (moisture resistant epoxy putty) complete as per manufacture specification and direction of Engineer-In-Charge.
-
-
-
Ground Floor
160.49
-
650
First Floor
130.94
-
650
Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor.
-
-
-
First Floor
373.25
-
349.89
Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X 32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm X 32mm X 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect.
-
-
-
Ground Floor
472.79
-
333.8
First Floor
107.22
-
333.8
INTERNAL ROAD.
-
-
-
Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5metre lift and stacking the soil upto a lead of 100 metre and including dewatering, removing slush,shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge.
-
-
-
All type of Soil
216
-
203.3
Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in depth: consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge.
144.72
-
135.53
Supplying of filling sand in foundation and over areas including watering,ramming, consolidating and dressing, labours, tools, taxes etc., all complete as per the specification and direction of E.I.C.
108
-
319.42
Providing, lifting, hoisting and laying Reinforced cement concrete of M-250 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
32.4
-
5526.77
Providing and laying approved colour 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with storng vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 75mm thick sand filling.as per drawing, specification and direction of Engineer-In-charge.
720
-
968.4
Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer - In- Charge at all floors and all heights including all material & labour complete.
216
-
89.99
RENOVATION OF EXISTING BUILDING.
-
-
-
Providing and laying plain cement concrete 1:3:6 (1 cement : 3 sand : 6 stone agregate 12mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc. complete all depth and height.
-
-
-
Ground Floor
26.93
-
4878.46
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. at all floors and all heights.
-
-
-
Ground Floor
4.65
-
4034.33
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:4) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. at all floors and all heights.
-
-
-
Ground Floor
2.03
-
4265.18
First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. at all floors and all heights.
-
-
-
Ground Floor
5.29
-
4072.66
12mm cement plaster on external RCC/brick surfaces in cement plaster 1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.
-
-
-
Ground Floor
140.53
-
133.7
first floor
225.58
-
136.93
16mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.
-
-
-
Ground Floor
335.2
-
191.12
first floor
337.22
-
195.91
6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1 cement : 4 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.
-
-
-
Ground Floor
577.03
-
149.91
first floor
575.54
-
153.68
Providing and laying Vitrified floor tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.
-
-
-
Ground Floor
532.93
-
942.25
First Floor
531.44
-
951.86
Providing and laying Vitrified skirting tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 12 mm thick cement mortar 1:3 (1cement: 3coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of EIC at all floors and all heights.
-
-
-
Ground Floor
56.4
-
1027.73
*
56.7
-
1042.19
Providing and laying Matte Finish Vitrified floor tiles 300x300 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1cement:4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.
-
-
-
Ground Floor
14.7
-
894.7
First Floor
14.7
-
904.31
Providing and fixing 1st quality Ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) minimum thickness 5mm of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make in all colours, shades except burgundy, bottle green, black of size 300x200 in skirting and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per direction of Engineer-In-Charge. In all floors and all heights.
-
-
-
Ground Floor
52.27
-
761.32
First Floor
25.73
-
775.77
Providing and fixing 20mm thick Granite stone flooring (sample of Granite stone should be approved by EIC) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish and groove in staircase where required etc. complete as per direction of Engineer-in-charge. In all floors and all heights.
-
-
-
Ground Floor
46.25
-
2032.7
*
16.16
-
2042.3
TATA Pravesh Window
-
-
-
Ground Floor
30
-
29368.88
First Floor
30
-
29369.88
TATA Pravesh Ventilator
-
-
-
Ground Floor
1
-
12287.88
First Floor
1
-
12288.88
TATA Pravesh Door
-
-
-
Ground Floor
10
-
25203.32
First Floor
10
-
25204.32
Supplying fitting and fixing Fibre Reinforced Polymer FRP composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwiched core, so as to impart monolithic composite structure as per approved technology (DST) to satisfy IS: 4020 door testing performance criteria including necessary ISI :Aluminium hinges & brass screws as approved by EIC. Standard size 75mm X 100 mm
-
-
-
Ground Floor
4.95
-
450
Supplying fitting and fixing Fibre Reinforced Polymer FRP composite door shutter with hinge as per approved section with glass fibre reinforced plastic moulded skins and a special sandwiched core, so as to impart monolithic composite structure as per approved technology (DST) to satisfy IS: 14856 door testing performance criteria including all complete, as approved by EIC.
-
-
-
Ground Floor
1.58
-
2750
Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (All steel sections contractor's own supply) at all floors and all heights.
-
-
-
Ground Floor
2706.75
-
68.73
Providing & Applying priming one coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete at all floors and all heights.
-
-
-
Ground Floor
2162.82
-
58.19
First Floor
2451.55
-
59.63
Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-charge at all elevations including all material labour complete at all floors and all heights.
-
-
-
Ground Floor
468.44
-
61.33
First Floor
751.92
-
62.49
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete at all floors and all heights.
-
-
-
Ground Floor
1694.37
-
84.69
First Floor
1699.62
-
86
Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. including interior wall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge at all floors and all heights.
-
-
-
Ground Floor
1694.37
-
76.4
First Floor
1699.62
-
77.9
Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour complete at all floors and all heights.
-
-
-
Ground Floor
330.53
-
89.99
First Floor
245.58
-
91.54
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well ramed, consolidated and grouted with fine sand and finishing the top smooth including shuttering at the edges, excavation and disposing of surplus earth with a lead of 100m complete as per direction of Engineer-in-charge.
-
-
-
Ground Floor
89.32
-
509.99
Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X 32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm X 32mm X 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect.
-
-
-
Ground Floor
472.79
-
333.8
Providing, fitting & fixing of False ceiling with aluminum anodized T-section
-
-
-
computer lab/Smart Class-Room
100.54
-
1070
Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor.
-
-
-
Ground Floor
21.56
-
291.2
First Floor
531.44
-
349.89
BOUNDARY WALL WITH ENTRANCE GATE.
-
-
-
Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works up to and including 1.5 metre lift and stacking the soil upto a lead of 100 metre and including dewatering, removing slush,shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge.
411.66
-
203.3
All type of Soil
-
-
-
Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in depth: consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge.
275.82
-
135.53
Supplying of filling sand in foundation and over areas including watering,ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of E.I.C.
217.44
-
319.42
Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring ,shuttering etc. complete all depth and height.
42.81
-
4543.32
Brick work with Fly ash Bricks in cement mortar (1:6) in Foundation & Plinth having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary.
131.64
-
4034.33
Brick work with Fly Ash bricks in cement mortar (1:6) in superstructure having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary .
154.88
-
4072.66
Providing, lifting, hoisting and laying Reinforced cement concrete of M-250 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
a) Footings :-
43.38
-
5526.77
b) Column up to plinth-
20.09
-
11144.12
c) Plinth beam :-
31.58
-
5885.44
d) Column up to Top
35.48
-
11144.12
e) Top Beam
17.46
-
11144.12
f) Slab
1.58
-
9601.75
Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding ( Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-In-Charge Cold Twisted bars, Thermo-Mechanically-treated bars.
193.32
-
7640.67
16mm cement plaster on external RCC/brick surfaces in cement plaster 1:6 (1 cement:6coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.
1965.88
-
191.12
6mm cement plaster on external RCC/brick surfaces in cement plaster 1:4 (1 cement : 4 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights as directed by the Engineer-In-Charge.
38.6
-
149.91
Providing & applying priming coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
2004.48
-
58.19
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete.
38.6
-
84.69
Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-Charge at all elevations including all material labour complete.
2004.48
-
61.33
Providing and laying 10/12 mm thick precast Kodappa tiles on entrance Gate over 25 mm thick bed of cement mortar 1:1 complete as per drawing, direction of Engineer-In-Charge and technical specification instruction of Engineer-In-Charge at all elevations including all material labour complete.
14
-
675.6
Providing and fixing 20mm thick mirror polished Granite Stone Wall pannelling (sample of Granite stone should be approved by EIC) for any locations wherever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-In-Charge. In all floors and all heights.The rate includes all complete with materials, labour, T&P, taxes etc.
20
-
2032.7
Providing and fixing M.S grill & Angle Gate of required patterns for Ventilator & Room Shutter etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (All steel sections contractor's own supply).
7938
-
68.73
Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour complete.
304.26
-
89.99
DISMANTLING & DISPOSAL.
-
-
-
Dismantling brick or stone masonry in cly above 3.6m height including removing the disposal the debris materials minimum 10 km form site .
39.32
-
1389
Dismantling of brick or stone masonary in lime or cement mortar above 3 mtr height including stacking the useful materials for reuse & removing the debries within 50 mtr.(for Bondry wall)
21.25
-
1126.43
INTERNAL P.H. & SANITARY WORK.
-
-
-
WATER SUPPLY.
-
-
-
Supplying, installing, fixing, jointing, testing and commissioning of approved make. Chlorinated Polyvinyl Chloride pipes (CPVC) SDR.11 pipes confirming to ASTM standards with necessary fittings for inetrnal toilet water supply upto 50 dia , and above 50mm dia pipe schedule 40 with fitting shall be schedule 80 ASTM IPS. The fittings and specials such as tees, elbows,couplers, bends, enlargers etc.,m with CPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, Brass FPT elbow etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in cement martor 1:1 restore the same original condition neately as directed by the Engineer in-charge. Joints to be made with CPVC solvent cement up to 50mm dia as per ASTM D-2846 and above 50mm dia primer P-70, and solvent confirming to ASTM F-4931 / 724 All exposed pipe shall be painted with latex paint. (for shafts, basement ceiling ringmain Terrace & PRM).The rate shall include necessary GI supports, GI grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. Make:- Supreme/Ashirbad/AKG.
-
-
-
GROUND Floor
-
-
-
20 mm dia C-PVC pipe (Oriplast/Supreme)
16
-
183.7
25 mm dia C-PVC pipe (Oriplast/Supreme)
41
-
261.7
32 mm dia C-PVC pipe (Oriplast/Supreme)
12
-
384.4
FIRST Floor
-
-
-
20 mm dia C-PVC pipe (Oriplast/Supreme)
12
-
186.42
25 mm dia C-PVC pipe (Oriplast/Supreme)
68
-
264.35
32 mm dia C-PVC pipe (Oriplast/Supreme)
18
-
387.13
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of Engineer-in-charge. 250 mm thick wall
-
-
-
GROUND Floor
16
-
48
FIRST Floor
5
-
55.19
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C.
-
-
-
GROUND Floor
36
-
153.2
FIRST Floor
30
-
153.2
Providing ,fixing , testing and commissioning of submersible type Domestic/flushing Water lift pumps set 1 no’s pumps casing shall be cast iron and impeller shall be Stainless steel the pump 1 HP capacity shall be provided by manufacturer at suitable head to work on 1Ph, 50Hz, 240V with necessary unions, flanges etc. complete. Vendor shall consider the electrical control panel comprising of all accessories such as MCB control wiring & End terminations, earth strip of GI 25 x 3 mm,cable tray and suitable size of and isolation valve and NRV at the delivery side of the pumps as per the manufactures recommendation and any other necessary imports etc. complete.
1
-
23670
SANITARY FIXTURES.
-
-
-
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C. pan) of Hindware/Jaquar/Parryware with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer-In-Charge.
-
-
-
EWC with 'p' / S trap plain CERA CONVENTIONAL (520x360x390) CAT. NO. S105310 STRAP
7
-
4233
Supplying all materials, labour, T&P and fixing Health Faucet of Hindware/Jaquar/Parryware complete with Chromium plated brass brackets fixed to wooden plugs with Chromium plated brass screws as per specification and direction of the Engineer-In-Charge.
-
-
-
15mm dia CP Health Faucet of Jaquar 1.2mtr long, 8MM dia Jaquar ALD-573, Page-110.
8
-
1153.4
Supplying all materials, labour, T&P and fixing standard sized two way Bib cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP Two way bib cock with Flange Jaquar FUS-29041, Page-58.
8
-
1610.17
Supplying all materials, labour T&P and fixing wash basins of Hindware/Jaquar/Parryware with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer-In-Charge.
-
-
-
CERA COUNSEL 510x400mm Cat No.S2040101 Wash Basin Cat No. S2090101 Pedestal
8
-
4508
Supplying all materials, labour, T&P and fixing standard sized pillar cock of of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 15mm dia brass pillar cock (Cera PRS-031)
9
-
2281.3
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer-in-charge. 600mmx450mm size B.E.mirror (Alpina/Golden fish/Belgion)
9
-
2479.8
Supplying all materials, labour, T&P and fixing standard sized Robe Hook of Hindware/Jaquar/Parryware complete with all as per specification and direction of the Engineer in charge.
9
-
906.1
Supplying all materials, labour, T&P and fixing standard sized 15mm dia angular Stop cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP angle stop cock with wall flange Jaquar - FUS-29053, Page-58.
20
-
1099.2
Fixing of 32mm dia Brass/GM Fulway Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge. 32mm dia brass or gun metal full way valve.(Make- Shakti or equivalent.)
2
-
874
Fixing of 25mm dia Brass/GM Fulway Valve confirming to IS : 781-1995 of approved make as per specification complete as per direction of Er-in-charge. 32mm dia brass or gun metal full way valve.(Make- Shakti or equivalent.)
4
-
703.32
Supply all materials, labour, T&P and providing fitting & fixing (Aqua guard) pure Chill 80 PSS UV of size 750x570x1350 mm height with water storage capacity 80 liters along with 2 nos of fancets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc. all complete as per approved drawing, specification and direction of the EIC.
2
-
78254.9
Matrix Set-1 (WB 65X35 with one pair mounting brackets, EWC & cistern complete with fittings & seat cover, one no hinged rail 76 cm and five nos of grab rail 60cm)
1
-
55421.4
Fixing Rotational moulded Poly Propelene double layer cylindrical vertical water storage tanks confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fitting and providing extra sockets and jam nuts, fixing ball valve etc,including hosting upto a height of 5 mtr above ground level and placing the tank to the required postion etc all complete as per specification and direction of the Er-in-charge.
-
-
-
2000 Ltr
1
-
13529.07
Supplying, fixing and testing of kitchen Sink Stainless steel kitchen sink - with drain board
510x1040 mm bowl depth 250 mm
1
-
6007.8
Supplying all materials, labour, T&P and fixing standard sized SINK cock of Hindware/Jaquar/Parryware of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP Two way bib cock with Flange Cat. No.: F360023, HINDWARE,
1
-
1619.3
SEWAGE SYSTEM.
-
-
-
Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.
-
-
-
300mmx300mm with RCC cover
5
-
1578.1
Supplying all materials, labour, T & P and constructing of Inspection chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge.
-
-
-
Manhole 900mm x800mm x600mm
1
-
9591.4
Inside size 760 x760x450 mm
9
-
7694.4
Supplying, fixing and testing PVC soil, waste, Rain and vent pipes (SWR) SUPREME confirming to IS13592 : 1990, type B with rubber ring/Solvent (confirming toIS5382) joint inclusive of allnecessary specials like bends, tees,offsets, door bends, junctions, cowls, etc.,laid underfloor/ fixed on walls,and in pipe shafts etc., complete.The rate shall include necessary GI supports, GI grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. Make:- Supreme/Ashirbad/Astral
-
-
-
40 mm
20
-
371.2
75 mm
94
-
653.8
110 mm
73
-
931.3
Supplying, fixing and testing PVC soil, waste, Rain and vent pipes (SWR) SUPREME confirming to IS13592 : 1990, type B with rubber ring/Solvent (confirming toIS5382) joint inclusive of allnecessary specials like bends, tees,offsets, door bends, junctions, cowls, etc.,laid underfloor/ fixed on walls,and in pipe shafts etc., complete.The rate shall include necessary GI supports, GI grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. Make:- Supreme/Ashirbad/Astral
-
-
-
160 mm dia
120
-
882.1
Supplying, fixing and testing PVC multi floor trap with SS frame and cover 75mm dia outlet fixed on a bed of cement concrete with (Heavy duty type) etc., complete.
-
-
-
110 mm dia
6
-
194.8
Supplying, fixing and testing PVC nanhani trap with SS frame and cover 75mm dia outlet fixed on a bed of cement concrete with (Heavy duty type) etc., complete.
6
-
181.2
Providing ,fixing , testing and commissioning of approved make PVC vent cowl with necessary accessories etc., complete. Make-Supreme , Page-48
-
-
-
75 mm dia
10
-
86
110 mm dia
4
-
133.6
Providing and fixing Clean Out
3
-
155.3
Earthwork in excavation in all types of soil for 200mm dia site leveling, and forming the bottom surface foundation, pits, trenches and other civil works upto and including 1.5metre depth and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge.
46
-
196.68
BOREWELL.
-
-
-
Supplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipment, cleaning and levelling the site ,excavation of mud pit, channels etc, levelling of site all complete as per direction of engineer in charge.
1
-
11394.4
Supplying all labour, T&P and transporting the boring pipes, top casing, grouting pipes, PVC pipes and fittings,PVC well screens, cement ,bentinite and gravels etc to the worksite including loading and unloading etc all complete as per direction of the engineer in charge.
1
-
1320.6
Supplying all labour, T&P and drilling pilot bore not less than 102mm dia, without casing pipes, in all kind of soil and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore logging if required all complete as per direction of engineer in charge.Drilling pilot bore from 0 to 360 metres.
60
-
912.3
Supplying all labour, T&P and provinding bottom sealing whenever required for cement / bentonite slurry as per direction of the engineer in charge.
1
-
4940.7
Supplying all labour, T&P and reaming the pilot bore to the following sizes and depth without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction off engineer in charge. Reaming 100mm to 1450mm dia from 0-3
60
-
157.4
Reaming 150mm to 200 mm dia from 0-360
60
-
186.9
Reaming 200mm to 300 mm dia from 0-360
60
-
207
Supplying all labour, T&P and jointing matrials & lowering the 300mm dia top casing pipes into the position and removing the same after all complete as per direction of engineer in charge . From 0-360 mtr.
16
-
1464.8
Supplying all labour, T&P and jointing matrials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of engineer in charge .
-
-
-
150mm dia PVC casing pipe from 0 to 360metres.
60
-
113.7
Cost of 150mm dia PVC ASTM pipe (sch-80).
60.5
-
1075.5
Cost of 150mm dia Slott Cutting.
10
-
250
150mm dia C.I. end/top cutter plug.
1
-
350
Cost & Conveyance of bentonite powder
10
-
269
Supplying all matrials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction off the engineer in charge.
-
-
-
Labour charges
1.1
-
1574.1
Add cost Gravel.
0.54
-
404.7
Supplying all materials, labour, T&P and packing the bore with river sand cver the gravel pack all complete as per the direction of the engineer in charge.Labour charges.
-
-
-
Labour charges
3
-
419.2
Cost and conveyance of sand .
3
-
184.7
Supplying all labour, T&P including developing the tube well with compressor (supplied by contractor ) continuiously worked till clear & adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour as per direction of the engineer in charge.
-
-
-
Labour charges
1
-
2036.6
Supplying all materials, labour, T&P and providing & fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D & pipe fittings of the following nominal bore with clamps including making good the wall, ceilling and floor all complete as per specification and direction.
35
-
147.2
40mm dia pvc ASTM pipe
18
-
245.7
Borewell chamber.
-
-
-
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the engineer-in-charge.1.20x1.20x0.40=
0.57
-
185.6
Supplying all matrials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all complete as per direction of the engineer in charge.
0.21
-
270.9
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering , curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the engineer in charge. In ground floor 1.20x1.2x0.15=
0.21
-
4787
Supplying all matrials, labour, T&P and providing brick work with fly ash brick having crushing strength not less than 75kg/cm2 with dimensional tolerance 8 percent in cement mortar (1:3) including watering , curing, conveyance of all materials to worksite, payment of royalty, taxec etc all complete as per specification and direction of the engineer incharge. In F&P 2(1.15+0.65)X1.00X0.25=
0.9
-
4885.1
Supplying all materials, labour , T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting incluuding conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the engineer in charge.R.C.C floor and roof slabs up to 4.30m height.
0.42
-
407.6
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and trying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the engineer in charge. In ground floor.
0.1
-
5320.3
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting , laying , watering , curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the engineer in charge. In ground floor.
0.13
-
7025
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard brocken granite chips including watering, curing , conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the engineer in charge. In ground floor.
0.08
-
6211.1
Supplying all maerials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering , curing, conveyance of all materials to worksite, payment of royalty, taxes etc all materials to worksite,payment of royalty, taxes etc all complete as per specification and direction of the engineer in charge. In ground floor (inside/outside)
9.74
-
144.5
INTERNAL WIRING. (acd block-1)
-
-
-
Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard ) Group C
-
-
-
ACADEMIC BLOCK-1
75
-
1022
Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge. (Make of wire: finolex/ Anchor/Havels/L&T/KDK) Average Length: 3 mtr
-
-
-
ACADEMIC BLOCK-1
51
-
369
Recessed wiring to ceiling fan point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire: finolex/ Anchor/ Havels/L&T/KDK) Group B
-
-
-
ACADEMIC BLOCK-1
30
-
1455
Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on same switch board as per direction of Engineer in Charge.
-
-
-
ACADEMIC BLOCK-1
18
-
477
Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer in Charge.
-
-
-
ACADEMIC BLOCK-1
6
-
827
Recessed wiring for 6 pin 16 amp socket outlet with 5Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.
-
-
-
ACADEMIC BLOCK-1
15
-
614
Recessed wiring for Projector socket outlet with 16A plug socket and 16A control switch at nearest separate location
-
-
-
ACADEMIC BLOCK-1
3
-
693
SUBMAIN.
-
-
-
Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
-
-
-
ACADEMIC BLOCK-1
80
-
205
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
-
-
-
ACADEMIC BLOCK-1
635
-
145
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
-
-
-
ACADEMIC BLOCK-1
165
-
131
DISTRIBUTION BOARD .
-
-
-
Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged
front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ Isolator)
-
-
-
4 WAY (4 + 12) DOUBLE DOOR, HORIZONTAL TYPE
-
-
-
ACADEMIC BLOCK-1
1
-
2176
Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface /recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland
plate, interconnection, phosphate and powder painted including earthing etc. as required ( But without MCB/ RCCB/ ISOLATOR)-
-
-
-
16 way SPN , MCB DB double door
-
-
-
ACADEMIC BLOCK-1
1
-
2132
12 way SPN , MCB DB double door
-
-
-
ACADEMIC BLOCK-1
3
-
1911
Supply and fixing of following rating 240 V Minature Circuit Breaker (MCB) having a sensitivity current up to 10kA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required.
-
-
-
6 amp to 32 amp rating SP MCB , "c" series, 10KA breaking capacity
-
-
-
ACADEMIC BLOCK-1
64
-
131
63 amp rating FP MCB
-
-
-
ACADEMIC BLOCK-1
1
-
1539
Supply and fixing of following rating 240 V Residual Current Breaker with Overcurrent protection (RCBO) having a sensitivity current up to 100mA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required.
-
-
-
25 to 40 amp rating DP RCBO, 30mA
-
-
-
ACADEMIC BLOCK-1
4
-
2710
FIXTURE
-
-
-
Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.
-
-
-
Surface mounted indoor type 12W ROUND LED Luminaire with LED Lamp Similar to WIPRO Cat No. LD80-101-XXX-60-SM or equivalent.
-
-
-
ACADEMIC BLOCK-1
40
-
1353
Surface mounted indoor type SINGLE LED TUBE Luminaire with LED Lamp Similar to WIPRO Cat No. WIO921208 or equivalent.
-
-
-
ACADEMIC BLOCK-1
67
-
1344
Surface mounted indoor type BULK HEAD LED Luminaire with LED Lamp Similar to WIPRO Cat No. LW07-141-XXX-57-XX or equivalent.
-
-
-
ACADEMIC BLOCK-1
1
-
1898
Supplying and fixing of Energy efficient Street light LED luminaire with high pressure die cast aluminium housing with pure polyester powder coated dark grey Housing with high purity PMMA lense,Toughened glass with silicon gaskets for IP66 protection, wattage in range 30 watt Similar to WIPRO Cat No. LR02-331-XXX-57-XX or equivalent
-
-
-
ACADEMIC BLOCK-1
9
-
3061
Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.
-
-
-
ACADEMIC BLOCK-1
9
-
753
Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
-
-
-
ACADEMIC BLOCK-1
30
-
2589
Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
-
-
-
ACADEMIC BLOCK-1
9
-
2844
EARTHING
-
-
-
Earthing with GI earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
2
-
3313
Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
20
-
76
Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on surface or in recess for connection etc as required.
10
-
125
Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing as required.
20
-
51
INTERNAL WIRING. (acd block-2)
-
-
-
Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard ) Group C
-
-
-
ACADEMIC BLOCK-2
79
-
1022
Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge. (Make of wire: finolex/ Anchor/Havels/L&T/KDK) Average Length: 3 mtr
-
-
-
ACADEMIC BLOCK-2
84
-
369
Recessed wiring to ceiling fan point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire: finolex/ Anchor/ Havels/L&T/KDK) Group B
-
-
-
ACADEMIC BLOCK-2
68
-
1455
Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on same switch board as per direction of Engineer in Charge.
-
-
-
ACADEMIC BLOCK-2
24
-
477
Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer in Charge.
-
-
-
ACADEMIC BLOCK-2
25
-
827
Recessed wiring for 6 pin 16 amp socket outlet with 5Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.
-
-
-
ACADEMIC BLOCK-2
5
-
614
Recessed wiring for A.C socket outlet with 20 amp SPN, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure indusrial socket ,20A SP MCB including all accesories and connection as per direction of Engineer in Charge.
-
-
-
ACADEMIC BLOCK-2
4
-
982
Recessed wiring for Projector socket outlet with 16A plug socket and 16A control switch at nearest separate location
-
-
-
ACADEMIC BLOCK-2
7
-
693
SUBMAIN.
-
-
-
Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
-
-
-
ACADEMIC BLOCK-2
100
-
205
Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
-
-
-
ACADEMIC BLOCK-2
80
-
169
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
-
-
-
ACADEMIC BLOCK-2
675
-
145
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
-
-
-
ACADEMIC BLOCK-2
185
-
131
DISTRIBUTION BOARD .
-
-
-
Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface /recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland
plate, interconnection, phosphate and powder painted including earthing etc. as required ( But without MCB/ RCCB/ ISOLATOR)-
-
-
-
16 way SPN , MCB DB double door
-
-
-
ACADEMIC BLOCK-2
5
-
2132
Supply and fixing of following rating 240 V Minature Circuit Breaker (MCB) having a sensitivity current up to 10kA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required.
-
-
-
6 amp to 32 amp rating SP MCB , "c" series, 10KA breaking capacity
-
-
-
ACADEMIC BLOCK-2
70
-
131
Supply and fixing of following rating 240 V Residual Current Breaker with Overcurrent protection (RCBO) having a sensitivity current up to 100mA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required.
-
-
-
25 to 40 amp rating DP RCBO, 30mA
-
-
-
ACADEMIC BLOCK-2
5
-
2710
FIXTURE
-
-
-
Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.
-
-
-
Surface mounted indoor type 12W ROUND LED Luminaire with LED Lamp Similar to WIPRO Cat No. LD80-101-XXX-60-SM or equivalent.
-
-
-
ACADEMIC BLOCK-2
30
-
1353
Surface mounted indoor type SINGLE LED TUBE Luminaire with LED Lamp Similar to WIPRO Cat No. WIO921208 or equivalent.
-
-
-
ACADEMIC BLOCK-2
120
-
1344
Surface mounted indoor type BULK HEAD LED Luminaire with LED Lamp Similar to WIPRO Cat No. LW07-141-XXX-57-XX or equivalent.
-
-
-
ACADEMIC BLOCK-2
1
-
1898
Supplying and fixing of Energy efficient Street light LED luminaire with high pressure die cast aluminium housing with pure polyester powder coated dark grey Housing with high purity PMMA lense,Toughened glass with silicon gaskets for IP66 protection, wattage in range 30 watt Similar to WIPRO Cat No. LR02-331-XXX-57-XX or equivalent
-
-
-
ACADEMIC BLOCK-2
12
-
3061
Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.
-
-
-
ACADEMIC BLOCK-2
12
-
753
Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
-
-
-
ACADEMIC BLOCK-2
68
-
2589
EARTHING
-
-
-
Earthing with GI earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
1
-
3313
Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
10
-
76
Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on surface or in recess for connection etc as required.
5
-
125
Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing as required.
10
-
51
EARTHING
-
-
-
Earthing with GI earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
2
-
3443
Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
15
-
76
Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on surface or in recess for connection etc as required.
10
-
124
Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing as required.
20
-
50
PANEL
-
-
-
Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including Busbars, interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used.
-
-
-
MAIN PANEL with 125A C/O Switch & 125A 4P MCCB (25kA) as incomer,63A 4P MCCB-2 Nos, 32A DP MCB-9 Nos, 32A DP MCB-with 32A DP Contactor-1, Timer-1, as Outgoing.
1
-
106121
CABLE .
-
-
-
Supply of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of following sizes of cable as required. (Make of Cable- Havells, Polycab, KEI or equivalent)
-
-
-
3.5 C x 50 sq.mm Al
65
-
337
4 C x 16 sq.mm Al
120
-
174
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade ofsize exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing RCC/HUME/STONEWARE/METAL pipe as required.
55
-
54
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground in the existing RCC/HUME/STONEWARE/METAL pipe as required.
110
-
39
Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required.
10
-
117
Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface as required.
10
-
76
END TERMINATION
-
-
-
Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.
-
-
-
3.5 C x 50 sq.mm Al
2
-
309
2 C x 6 sq.mm Al
2
-
183
EXTERNAL LIGHTING
-
-
-
4M long G.I.octagonal pole complete with RCC foundation, required G.I base plate , Single-arm of ERW galvanised pipe 30mm - 1M length, providing GI pipes for cable entry junction box with prewired 6 Amp SP MCB, loop-in -loop-out , terminal block, wiring with copper wire upto the fitting etc. complete
2
-
10200
Supply , fixing & termination of Outdoor Street Light LED Luminaire with 40w LED Lamp similar to WIPRO Cat No. LR02-451-XXX-57-G1 or equivalent
2
-
6075
Supply , fixing & termination of 30watt LED for use as Gate Light fitting complete with cover, GI pipe bracket, necessary wiring from loop-in-box with 3Cx1.5 sqmm copper wires inside PVC pipes etc complete as required with all materials similar to WIPRO Cat No. LP07-251-XXX-57-CL or equivalent
2
-
6687
Supply and Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 2Cx 6 sq.mm Al.direct in ground in the same trench in one tier horizontal formation including excavation , sand cushining protective covering and refilling the trench etc. as required.
50
-
443
Supplying and making end termination with brass compression gland and aluminum lugs for 2C x 6 sq.mm of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.
4
-
135
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
2
-
362
Supplying and fixing of of 50mm G.I pipe(Medium Class) along with accessories in ground including cutting & making good the same as required.
20
-
178
Supply, delivery & installation of GI coil earthing made out of 8 swg GI wire closely wound in shape of a helical coil of 50mm diameter with 115 numbers of turns including excavation of earthpit of size 800x 800x 1500mm in all kinds of soil, back filling the excavated pit with alternate layers of salt, charcoal around the coil with a diameter of 300mm upto 1000mm and balance by good quality soil, end termination complete as required.
2
-
750
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements