South East Central Railway Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 23,23,500Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Provision Of Automatic Signalling With Electronic Interlocking (ofc Based) Between Himgir-belpahar-
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
82-SNT-Proj-Tender-2024-PROJ-BSP-S AND T/SOUTH EAST CENTRAL RLYTender No
82-SNT-Proj-Tender-2024Tender Authority
South East Central Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Excavation of trench and clearing of roots of trees, bushes, ballast and reconditioning etc., including bailing out water 4 and disposal of extra soil. Track crossing, Road Crossing by pushing method (HDD method) at culverts/ track / pucca road crossing at a depth not less than 1 meter with reference to bottom of rail/road surface including supply of HDPE pipe/DWC pipe(4 inch dia) Note: This includes guarding of cables, relaying of cables and redoing of cable jointing in case of the thefts or otherwise at contractor's own cost till commissioned. [SOR-2021 for S&T works-Sch 'A' item no. 1(iii)(a)]
2500
1080
2700000
... More
Excavation of trench and clearing of roots of trees, bushes, ballast and reconditioning etc., including bailing out water and disposal of extra soil.Track crossing, Road Crossing by pushing method (HDD method) at culverts/ track / pucca road crossing at a 5 depth not less than 1 meter with reference to bottom of rail/road surface including supply of GI pipe with 76 mm dia, Spec. No. -1239 medium grade (for the length of pushing more than 05 meters) Note: This includes guarding of cables, relaying of cables and redoing of cable jointing in case of the thefts or otherwise at contractor's own cost till commissioned. [SOR-2021 for S&T works-Sch 'A' item no. 1(iii)(b)]
4000
2246
8984000
... More
Laying of Signalling Cable/Power/Quad cable / PIJF cable in the excavated trench to Drg.No:CON/SK/T/5.Transportation, 6 supply of 'U' clamps and anchoring of cable at every 10 Mtrs with 'U' clamp to Drg.No:CSTE/C/Cable/81 including back filling with excavated earth and ramming of trenches after cable laying. Note: This includes guarding of cables, relaying of cables and redoing of cable jointing in case of the thefts or otherwise at contractor's own cost till commissioned. [SOR-2021 for S&T works-Sch 'A' item no. 2(a)]
600
16740
10044000
... More
Laying and Fixing of galvanised iron pipe (GI Pipe) with threaded collars (for jointing pipe) of 80 mm nominal dia Spec.No.IS-1239 medium grade, on bridges, culverts, drains including supply and transportation of GI pipes and all other materials 7 required for fixing the pipe to Drg.No.Con/SK/T/2 and drawing of Signal/Power/Quad cables inside the pipe with masonary works over the entire length of the bridge and at entry and exit of the culvert and curing for 72 hrs, drilling of holes on the pipe at 10 cm apart to be clamped 2 Mtrs apart on culvert, for the Signalling, quad, power cable. Note: This includes guarding of cables, relaying of cables and redoing of cable jointing in case of the thefts or otherwise at contractor's own cost till commissioned.[SOR-2021 for S&T works- Sch 'A' item no. 2(c)]
4000
761
3044000
... More
Laying of RCC pipe including supply of required quantity at site with collars (for jointing pipe) 150 mm nominal dia to 8 Spec.No:IS-458 in excavated trench and laying of Signalling/ Power cable/PIJF cable/ Quad cables/HDPE pipe through RCC pipe. Power cable shall be laid in the same trench alongwith signalling/Quad cables but in a separate pipe RCC pipe at track/pucca road/ Platform crossing/ level crossing gate etc. Note: This includes guarding of cables, relaying of cables and redoing of cable jointing in case of the thefts or otherwise at contractor's own cost till commissioned.[SOR-2021 for S&T works-Sch 'A' item no. 2(d)]
1500
775
1162500
... More
Laying of half round RCC hume pipe with 150 mm dia & 1 mtr long including supply at site on single/multiple cable laid in the trench. Note: This includes guarding of cables, relaying of cables and redoing of cable jointing in case of the thefts or otherwise at contractor's own cost till commissioned.[SOR-2021 for S&T works-Sch 'A' item no. 2(f)]
1000
254
254000
... More
Supply, Transportation, fabrication and fixing of Hylum sheet of 12 mm thickness as per site requirement.[SOR-2021 for S&T works- Sch 'A' item no. 37]
10
2525
25250
... More
Fixing of calling-on signals/dependent shunt signals with enameled markers including drawing of cable through the signal post, termination of cables, wiring, fixing of calling- on/dependent shunt signal legend board, LED, two coat painting and lettering, testing and commissioning as required.[SOR-2021 for S&T works- Sch 'A' item no. 9(c)]
35
4629
162015
... More
The excavation of pit, casting of concrete foundation including surrounding earthwork along the foundation, erection, installation and wiring of steel apparatus case, fixing of terminals, fuse blocks, signal transformer, current transformer, filament switching unit, track battery chargers, adjustable/fixed resistances, choke coils, Fuses, Relays, E type locks , termination of cables, cable insertion, wiring to draw 110V AC therefore in the new apparatus case as required, testing, commissioning including subsequent 13 alterations (if required), bunching of cables, earthing of cable, armours etc. Painting of the apparatus case inside and outside after clearing the surface thoroughly and first coating of anti -corrosive paint and subsequent two coatings of Aluminum paint outside and Red Oxide inside and lettering. 18 mm Hylum sheet for location box shelf and 12 mm for cable termination in location box. Steel apparatus case (Large) to Drg. No. CON/SK/T/8 with 4 Nos. of foundation bolts 20mm x 460mm to Drg. No. SA-112 A/M or latest.NOTE: - Payment can be released in a part for the above said work after completion of- (i) Foundation- 30%,(ii) Erection - 15% , (iii) Wiring, testing, painting, sand filling, plastering, earthing & writings etc - 45% ,(iv) Commissioning - 10% of the rate.[SOR-2021 for S&T works- Sch 'A' item no. 4(a)]
350
17067
5973450
... More
The excavation of pit, casting of concrete foundation including surrounding earthwork along the foundation, erection, installation and wiring of steel apparatus case, fixing of terminals, fuse blocks, signal transformer, current transformer, filament switching unit, track battery chargers, adjustable/fixed resistances, choke coils, Fuses, Relays, E type locks , termination of cables, cable insertion, wiring to draw 110V AC therefore in the new apparatus case as required, testing, commissioning including subsequent 14 alterations (if required), bunching of cables, earthing of cable, armours etc. Painting of the apparatus case inside and outside after clearing the surface thoroughly and first coating of anti -corrosive paint and subsequent two coatings of Aluminum paint outside and Red Oxide inside and lettering. 18 mm Hylum sheet for location box shelf and 12 mm for cable termination in location box. Steel apparatus case (half) with 4 Nos. of SS foundation bolts 20mm x 460mm to Drg.No. SA-112 A/M or latest. .NOTE: - Payment can be released in a part for the above said work after completion of- (i) Foundation- 30%,(ii) Erection - 15% , (iii) Wiring, testing, painting, sand filling, plastering, earthing & writings etc - 45% ,(iv) Commissioning - 10% of the rate. [SOR-2021 for S&T works-Sch 'A' item no. 4(b)]
30
8534
256020
... More
The excavation of pit, casting of concrete foundation including surrounding earthwork along the foundation, erection, installation and wiring of steel apparatus case, fixing of terminals, fuse blocks, signal transformer, current transformer, filament switching unit, track battery chargers, adjustable/fixed resistances, choke coils, Fuses, Relays, E type locks , termination of cables, cable insertion, wiring to draw 110V AC therefore in the new apparatus case as required, testing, commissioning including subsequent 15 alterations (if required), bunching of cables, earthing of cable, armours etc. Painting of the apparatus case inside and outside after clearing the surface thoroughly and first coating of anti -corrosive paint and subsequent two coatings of Aluminum paint outside and Red Oxide inside and lettering. 18 mm Hylum sheet for location box shelf and 12 mm for cable termination in location box. Steel apparatus case (Quarter) to Drg.No. RE/S&T/Sig./Tender/SK/5A/91 with 4 Nos. of SS foundation bolts of size 20mm x 300mm or latest. NOTE: - Payment can be released in a part for the above said work after completion of- (i) Foundation- 30%,(ii) Erection - 15% , (iii) Wiring, testing, painting, sand filling, plastering, earthing & writings etc - 45% ,(iv) Commissioning - 10% of the rate.[SOR-2021 for S&T works-Sch 'A' item no. 4(c)]
15
4266
63990
... More
Alteration/ Modifications in the existing location boxes, fixing of equipments, cable insertion, termination, wiring, testing & commissioning, two coat painting, lettering to suit the circuits as per approved wiring diagrams. This includes filling with sand and plastering the same.[SOR-2021 for S&T works-Sch 'A' item no. 5(a)]
50
2548
127400
... More
Shifting of existing location boxes to facilitate earthwork of Engg./Con. This includes filling with sand and plastering inside location boxes.[SOR-2021 for S&T works-Sch 'A' item no. 5(b)]
5
3580
17900
... More
Excavation of earth pit, transportation, placing and fixing of earth electrode with construction of cement enclosure to Drg.No.CON/SK/T/9 and CON/SK/T/9A and drawl of GI wire wrapped on MS strip (35 x 6 mm) from earth electrode to all signalling equipments, including fixing and soldering of lugs at both end of the wire.[SOR-2021 for S&T works-Sch 'A' item no. 8]
495
1941
960795
... More
Installation of signal posts for Multiple Aspect Colour Light Signals complete with signal units,bases, LED unit, fixing and wiring of current transformers of LED units, ladders & other fittings, excavation of pit, casting of cement concrete foundations with necessary water outlets, erection and fixing of complete fittings of the signal/signal post with necessary earthed screen protection arrangement, including drawing of cable through signal posts, termination of cables, wiring, testing and commissioning, 19 two coat painting and lettering, supply and fixing of speed boards if required for the following:- NOTE:- The foundation for Multiple Aspect Colour Light Signal Post drg. No. Con/SK/T/12 and and the foundation bolts shall be of sizes 24 mm x 915 mm to Drg. No. SA- 116A/M and bolts for each foundation for above shall be of size 20 mm x 305 mm to Drg. No. SA- 110A/M ( 4 nos. for each) with two nuts and two washers each per bolt.3 ASPECT/4 ASPECT Note: Payment can be released in a part for the above said works after completion of- (i) Foundation-30%, (ii) Erection - 15%,(iii) Wiring, testing, painting, sand filling, plastering, earthing & writings etc - 45%, (iv) Commissioning - 10% of the rate.[SOR-2021 for S&T works-Sch 'A' item no. 9(a)(ii)]
120
19551
2346120
... More
Installation, testing and commissioning of Position Light shunt signal (Independent), posts complete with lamps/LED lamps, LED units, Bases and other fittings, excavation of pit, casting of cement concrete foundation, fixing of complete fittings of signal, LED lamps, current regulator including foundation bolts, washers, nuts, termination of cables, wiring, painting and lettering as 20 required. NOTE:- The foundation for position light shunt signal Drg. No. Con/SK/T/13 and bolts for each foundation for above shall be of size 20 mm x 305 mm to Drg. No. SA-110A/M ( 4 nos. for each) with two nuts and two washers each per bolt.Note: Payment can be released in a part for the above said works after completion of- (i) Foundation-30%, (ii) Erection - 15%,(iii) Wiring, testing, painting, sand filling, plastering, earthing & writings etc - 45%, (iv) Commissioning - 10% of the rate.[SOR-2021 for S&T works-Sch 'A' item no. 9(d)]
2
3856
7712
... More
Fixing, cable drawing and termination, wiring, painting, lettering, testing and commissioning of Junction type Route indicator complete along with lamp/LED unit.[SOR-2021 for S&T works- Sch 'A' item no.10(i)] 1/2 Way
10
2110
21100
... More
Fixing, cable drawing and termination, wiring, painting, lettering, testing and commissioning of Junction type Route indicator complete along with lamp/LED unit -3/4 Way .[SOR-2021 for S&T works-Sch 'A' item no. 10(ii)]
-
-
22
... More
Alteration/modification, testing, commissioning, two coat painting, lettering of the existing 2 Aspect/3 Aspect/4 aspect signals/shunt signals/calling on signal/ LC gate to suit the circuit per approved wiring diagram including fixing of LED/Signal lamps and their wiring.[SOR-2021 for S&T works-Sch 'A' item no. 11(a)]
50
1274
63700
... More
Supply & Erection alongwith casting of foundation of Stop board /Sighting board/SLB/BSLB/legend board as per approved drawings. [SOR-2021 for S&T works-Sch 'A' item no. 12(a)]
50
5094
254700
... More
Supply of retro reflective signal/shunt signal enameled number legend board of size- 300mm X 200mm X 3mm (minimum) made up of aluminum composite - 4 panel (ACP) with white back ground and alphabets/numbers in black along with fixing clamps..[SOR-2021 for S&T works-Sch 'A' item no. 12(b)]
150
308
46200
... More
Installation of retro reflective signal/shunt signal enameled number legend board.[SOR-2021 for S&T works-Sch 'A' item no.12(c)]
150
77
11550
... More
Excavation & casting of pedestal foundation for left/right hand boom of lifting barriers.[SOR-2021 for S&T works-Sch 'A' item no. 13]
4
9427
37708
... More
Erection and commissioning of Lifting Barrier assembly complete including boom support, positive boom locking 28 device, Emergency crank handle attachment, Timer unit to adjust the time for operating the barrier, Fixing of Hooters/Flashers on either side of gate barriers, 1 (one) control panel, weather proof painting, lettering, Necessary MS weight for balancing the booms, etc.[SOR-2021 for S&T works-Sch 'A' item no. 15] 29
2
17912
35824
... More
Dismantling of the following: -Signal posts/BSLB/SLB/Stop Board.[SOR-2021 for S&T works-Sch 'A' item no. 16(i)]
55
232
12760
... More
Dismantling of the following: -Relay racks with all fittings, battery racks complete, Equipment rack complete, SM's slide..[SOR-2021 for S&T works-Sch 'A' item no. 16(iii)]
15
360
5400
... More
Dismantling of the following: -Battery charger, Battery set etc. TLBI, DLBI and other Misc. equipments..[SOR-2021 for S&T works-Sch 'A' item no. 16(iv)]
25
229
5725
... More
Dismantling of the following: - Signal Foundation(upto ground level by hydraulic breaker).[SOR-2021 for S&T works-Sch 'A' item no. 16(xi)]
30
2174
65220
... More
Collecting, stacking with deployment of Man power, Hydra etc for Loading/ Unloading and Transportation of Materials 37 (Fresh/Released/ Unused) from (i) work site to GSD/Raipur, (ii) work site to the store of SSE(SIG)/CON,(iii) any store depot to any other store depot over Indian railways as decided by Railway Administration by suitable Trucks and stacking properly.[SOR-2021 for S&T works-Sch 'A' item no. 17]
12000
38
456000
... More
Installation, testing and commissioning of track circuits as per Drg.No:SK/DRG/OL/27 and track bonding plan including drilling of 9/32" holes on rails, provision of bonding, block joints (90R/52Kg/60 Kg) with machined fish plate or Glued Joints, fixing and painting of track lead junction boxes, fixing of 25 mm nominal dia GI pipe of required length with 9/32" holes at 10 cm. apart for 38 protection of tail cables, insulation of lead wires from rails using heat shrinkable tape, insulation of traction bonds below rails with 3mm thick heat shrinkable tapes, fixing of lead wire suitably with sleepers. Provision of tail cable termination, fixing of track lead wires, jumper wires, terminals, track charger,adjustable/fixed resistance, choke coil, fuses, battery, track relay etc., and also lettering/numbering of track lead junction boxes, block joints and track circuits. Straight portion of track circuit.[SOR-2021 for S&T works- Sch 'A' item no. 21(a)]
5
3832
19160
... More
Deployment of Prokline/ Hydra operation at site for exposing the burried cables or relocation the Location Box/ Signal Post with foundation as per the advice of Railway site engineer.[SOR-2021 for S&T works- Sch 'A' item no. 28]
50
603
30150
... More
Fixing of concrete cable route marker at 30-40 meter and at diversion point including supply & transportation of cable route marker at site. Detail size & fixing of cable route marker should be followed as per drawing no. SDO/Cable laying/020..[SOR- 2021 for S&T works-Sch 'A' item no. 32)]
400
415
166000
... More
Installation, testing and commissioning of sliding boom LC gates complete which includes casting of concrete 41 foundation including surrounding earthwork along the foundation (Dia-30 cm & depth-100 cm total ten numbers per gate), fixing and welding of channel, fixing of clamps, cutting of rail post, fixing of lock post with two numbers excavation of Pit casting of concrete foundation for "B" type foundation per gate, laying of cable for road crossing and fixing of MS plate/channel also as requirement of the site condition.[SOR-2021 for S&T works- Sch 'A' item no. 24] 42
2
37853
75706
... More
Installation and Fixing of "E" type lock along with Welding Work ..[SOR-2021 for S&T works- Sch 'A' item no. 26]
10
704
7040
... More
Small value Engg. items, required if any to be executed at site as per advise of Dy.CSTE/Proj, shall be paid as per prevailing SOR of Engg. deptt. of SECR at the time of execution. [SOR-2021 for S&T works- Sch 'A' item no. 36].
-
-
60377
... More
Cement Concrete of proportion 1:3:6 with graded aggregate of size 25mm. and below.[SOR-2021 for S&T works-Sch 'A' item no. 7]
30
2943
88290
... More
Switching/shifting of working cables conductors from the existing CTR/CRR/Location box to the new CTR/CRR/Location box with parallel patching without interfering the working signalling circuits in presence of Railway engineer at site.[SOR-2021 for S&T works- Sch 'A' item no. 31].
-
-
45
... More
Re-deployment of skilled/unskilled staff of contractor, if NI/CRS inspection/opening of line is deferred beyond 30 days 46 from the date of issuing certificate duly signed by site engineer of railway & contractor to this affect that the status of work in all respects is in readiness stage to undertake the NI/conduct CRS inspection/opening of the line with the station concerned. (In this regard, the certificate is to be submitted to DyCSTE/Project duly signed by site engineer of railway & contractor).[SOR-2021 for S&T works- Sch 'A' item no. 34]
1
241507
241507
... More
Deployment of security personnel for guarding of EI installation whenever required as per advice of DyCSTE round the clock, if date of NI/CRS inspection/ opening of line is deferred beyond 30 days from the date of completion of work of the station. (A completion certificate to be submitted to Dy. CSTE/Project duly signed by site engineer of railway & contractor, if NI/CRS inspection is deferred beyond 30 days from the date of completion of work of a station) .[SOR-2021 for S&T works- Sch 'A' item no. 35]
1
-
24151
... More
Physical tracing and opening/locating of existing working cables by precession digging for diversion of cables in connection with cable clearance for engineering earth work without interfering the circuits as per the advice of Railway site engineer. [SOR-2021 for S&T works- Sch 'A' item no. 30]
500
241
120500
... More
Q-series/Composite Relay Racks and cable termination racks (New).NOTE: Payment can be released in a part for the above said work after completion of- (i) Erection- 15%,(ii) Wiring, testing, painting, earthing & writings etc - 75% ,(iii)Commissioning of Relay rack/Composite rack/CTR- 10% of Schedule rate.[SOR-2021 for S&T works-Sch 'A1' item no. 1(a)]
23
48363
1112349
... More
Alteration of existing Q-series/Composite Relay Racks and cable termination racks.[SOR-2021 for S&T works-Sch 'A1' item no. 1(b)]
35
19785
692475
... More
Installation and wiring of Rotary key transmitters/KLCR on teak wood board enclosed inside a suitable box with front transparent check cover with locking arrangement. This includes 3/4" thick teak wood boards, transparent sheet for box, locking arrangement. 2 nos.of locks for box and 1 No. lock for front transparent sheet. [SOR-2021 for S&T works-Sch 'A1' item no. 2]
5
507
2535
... More
Charging and installation of secondary cell 2 V (lead acid type), and preparation of electrolyte for lead acid cells. If 4 power is not available at site of work, charging may be done at nearby location as per convenience of the Railway. Initial Charging to be done in presence of Rlys representative from executive agency as well as maintenance org, with uninterrupted supply. 2 Volt 80AH. [SOR-2021 for S&T works- Sch 'A1' item no. 04(ii)]
15
310
4650
... More
Installation, wiring as per approved wiring diagram, testing and commissioning of control panel (operation cum indication panel) complete with termination of cable, painting and lettering as required. Cable termination in MS rack with 3⁄4th inch 5 thick sal wood strips including fabrication there of as per requirement of the Railway. Fixing of cable with MS clamps, fixing of terminal block, M.S. wiring ladder with insulated M.S. strips from relay room to panel room, painting and lettering, filling sand under control panel rest table, cable duct, covering the open space around the control panel rest table with bricks lining, masonry work and plastering the same with cement required.[SOR-2021 for S&T works-Sch 'A1' item no. 7]
2
19568
39136
... More
Installation testing and commissioning of Distilled water plant/Demineralised plant. [SOR-2021 for S&T works-Sch 'A1' item no. 9] 7
1
3309
3309
... More
Installation, cable termination, wiring, testing of magneto telephones.[SOR-2021 for S&T works-Sch 'A1' item no. 13]
15
999
14985
... More
Installation, cable termination, testing and commissioning of 10/20/50 Pair CT Boxes.[SOR-2021 for S&T works-Sch 'A1' item no. 14]
10
786
7860
... More
Wiring of door detection Proximity switch to the tag block of dataloggers/RTU (This includes provision of casing and capping and other wiring accessories, excluding 16/0.2 wire which will be supplied by Railways). This includes incorporation of this contact in datalogger simulation & datalogger report.[SOR-2021 for S&T works-Sch 'A1' item no. 16(a)]
4
1242
4968
... More
Installation, testing of door contacts and validation and proximity switch data through Dataloggers/RTU. This includes incorporation of this contact in datalogger simulation & datalogger report.[SOR-2021 for S&T works-Sch 'A1' item no. 16(b)]
4
1242
4968
... More
Development of door 'close and open' software logics module & its implementation.[SOR-2021 for S&T works-Sch 'A1' item no. 16(c)]
4
1242
4968
... More
Installation, cable termination, wiring, testing and commissioning of Auto Changeover panel. [SOR-2021 for S&T
4
6208
24832
... More
Design, Preparation & checking of documents and Circuit diagram and drawings
-
-
1124478
... More
Supply of 4 Aspect Drawing No:SA- 23001 A/M . Alt. 8. Signal Colour light Multi unit long range working on 110 V, AC 50 C/s.complete but without lamp, transformer and lenses and suitable for 140 mm dia. Post with expanded metal netting. Drg. No. SA//23023 A/M to CM (Adv.) Alt- 7 for metal netting. Spec. IRS:S-10/78, IRS:S-26/64, IRS:S 23/88. Inspection by RITES.[SOR-2021 for S&T works- Sch 'B' item no. 1(a(iii))]
-
-
1
... More
Tubular post for CLS 5.5 Mtr. Spec.IRS.S-6/81.Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 6(a)]
120
2857
342840
... More
Signal base 140mm.dia(type tube) Drg.No.S-2011/M.Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works- Sch 'B' item no. 6(b)]
120
7134
856080
... More
Ladder 5.5Mtr for CLS Drg.No.SA-23156(Adv)Alt-1.Spec.No.IRS-S-10. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 7]
120
4082
489840
... More
Off set bracket for colour light 140 mm. outside dia post Drg. No. SA-23080(Adv) Alt-1.IRS-S- 10-78. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 8].
30
974
29220
... More
Supply of pinnacle SA-2019A for tubular signal post. Inspection by Rep. of Railway Engineer. [SOR-2021 for S&T works- Sch 'B' item no. 27]
30
784
23520
... More
Marker 'G' non-illuminated Drg. SA- 23476 (Adv.) Spec. No. IRS-S-7. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 12]
22
321
7062
... More
Steel Apparatus Case(Large) as per Drg.No.Con/SK/1/1/86, with E type lock on both side having ward No.32.Inspection by RITES. [SOR-2021 for S&T works-Sch 'B' item no. 14]
350
15782
5523700
... More
Supply of Steel apparatus case (Half) RE type as per Drg. No. RE/S&T/ALD/SK/220/82 Alt.A and 221/82 with Alt. B.Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 15]
30
7757
232710
... More
Supply of Steel Apparatus Case(quarter) as per sketch No. RE/S&T/ALD./SK/227/82 corrected upto 30686 & 228/82 corrected upto 18/1/93, with E type lock having ward No.32. The key & handle should be at the rate of one each per two junction boxes. Inspection by Rep. of Railway Engineer. [SOR-2021 for S&T works-Sch 'B' item no. 16]
15
3388
50820
... More
Relay Rack for 'Q' Series Relay as per Drg. No: SK/DRG/OL/SER/192 SH 2/2. The relay racks must be powder coated of stone grey colour. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 17]
7
9386
65702
... More
Composite Relay Rack as per drg.No.SK/DRG/OL/SER/192- SH1/2.The relay racks must be powder coated of stone grey colour. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 18]
8
10395
83160
... More
Cable termination racks as per Drg. No:SK/DRG/OL/SER/197. The relay racks must be powder coated of stone grey colour. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 21]
8
3088
24704
... More
Wiring ladder of 25x25x3mm. Aluminum angle and 20x3mm.flat, 2 Mtr. Inspection by Rep. of Railway Engineer.[SOR- 2021 for S&T works-Sch 'B' item no. 22]
300
267
80100
... More
Wire IG 8 SWG for Bonding. Insp. by : Rep. of Railway Engineer. Note:-This item will be issued to contractor from Railway store only for picking of existing track circuits during Pre-Pre-NI & Pre-NI work.[SOR-2021 for S&T works- Sch 'B' item no. 32]
35
59
2065
... More
PVC insulated GI flexible wire for lead wire of track circuit used in Railway signalling. Dia 6mm (19 Sqmm cross 18 sectional area) Constrction 7x7 core WSC. Lay Right Hand ordinary. Finish Galvanised. Tensile strength 125-140kgf/sqmm. Confirming to IRS S3-61. PVC thickness 1mm. O.D. 8mm. Colour of PVC Red- 50% & Black-50%. Make:Bharat or similar. Inspection by Rep. of Railway Engineer. Note:- This item will be issued to contractor from Railway store only for picking of existing track circuits during Pre- Pre-NI & Pre-NI work.[SOR-2021 for S&T works- Sch 'B' item no. 33]
300
66
19800
... More
Channel pin 7 mm dia. Inspection by: Representative of Railway Engineer. Note: - This item will be issued to contractor from railway store only for picking of existing track circuits during Pre-Pre-NI & Pre-NI work.[SOR-2021 for S&T works- Sch 'B' item no. 34]
2000
1
2000
... More
Supply of pipe lock signal unit ( Handcuff lock)(Minimum one key for each lock). Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 29]
300
123
36900
... More
Supply of Distribution board , Make MATRIX or similar. Size : 600 x 800 mm x 220 mm. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works- Sch 'B' item no. 30(a)]
8
4154
33232
... More
Installation of Distribution board , Make MATRIX or similar. Size : 600 x 800 mm x 220 mm.[SOR-2021 for S&T works- Sch 'B' item no. 30(b)]
8
1038
8304
... More
Supply of 2 conductor through terminal block, 1000 Volt Ac, 125 AMP, suitable for conductor of size : 10,16 & 25 sq mm, wago model No. 285 135 Grey colour; make wago or similar. (10 sq mm- 1000 no., 16 sq mm- 300 no. , 25 sq mm-100 no.).Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works- Sch 'B' item no. 31(i)(a)]
120
486
58320
... More
Supply of Adjacent Jumper for above TB, WAGO PNo. 285.435. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works- Sch 'B' item no. 31(i)(b)]
50
107
5350
... More
Supply of Rail for above 35mm x 15 mm, 2.3 mm thick no. 210 -198 Inspection by Rep. of Railway Engineer. [SOR- 2021 for S&T works- Sch 'B' item no. 31(i)(f)]
-
-
25
... More
Supply of Operating tools with partially insulated shaft, P No. 210-721. Inspection by Rep. of Railway Engineer. [SOR- 2021 for S&T works- Sch 'B' item no. 31(i)(g)]
3
842
2526
... More
2 conductor through terminal block, 1000 Volt Ac, 232 AMP, suitable for conductor of size : 70 sq mm, wago model No. 285 195 Grey colour. make wago or similar. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works- Sch 'B' item no. 31(ii) (a)]
30
2050
61500
... More
Supply of Allen Key WRENCH with partially insulated shaft, P No. 285 -172. Inspection by Rep. of Railway Engineer. [SOR-2021 for S&T works- Sch 'B' item no. 31(ii)(f)]
2
1015
2030
... More
Pad Locks of Godrej make model Nav-tal - 6 Levers - Long Shackle (3 keys) or latest. Inspection by Rep. of Railway Engineer. [SOR-2021 for S&T works- Sch 'B' item no. 28]
30
550
16500
... More
Marker 'C' non-illuminated Drg. SA- 2435 (Adv.) Spec. No. IRS-S-7 . Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 10]
40
320
12800
... More
Supply of 3 Aspect Drawing No: SA- 23002 A/M . Alt.8. Signal Colour light Multi unit long range working on 110 V, AC 31 50 C/s.complete but without lamp, transformer and lenses and suitable for 140 mm dia. Post with expanded metal netting. Drg. No. SA//23023 A/M to CM (Adv.) Alt- 7 for metal netting. Spec. IRS:S-10/78, IRS:S-26/64, IRS:S 23/88. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 1(a(i))]
4
17030
68120
... More
Shunt signal dependent type Drg.No.SA-23840(Adv) Alt.1 & S-23845 Adv. with off-set bracket to Drg. No. SA23080 Adv. Alt. 1 & specn. No. IRS:S-10/78 to suit 140mm. Outside dia post complete.Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 3]
20
4498
89960
... More
Calling on signal (CLS Type ) Drg.No: SA-24351(Adv.), Spec. No. IRS-S-10/78, IRS :S-26/64. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 4)]
15
2732
40980
... More
Route Indicator junction direction 5 lamp type with Arms and drum complete but without lens and lamps, 3 way RH/LH.Drg.No.SA23403(Adv) for 3 way.Spec.No.IRS:S-66/84 with latest amd, IRS:S- 23/88, IRS:S10/78, IRS:S-26-64.Inspection by Rep.
17
16567
281639
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest amendment.Inspection by RDSO. 16/0.2 mm dia. (80% grey & 20% yellow). [SOR-2021 for S&T works-Sch 'B2' item no. 1(i)(c)]
40
10784
431360
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest amendment. Inspection by Rep. of Railway Engineer. Multi strand ISI copper cable (16 Sq.mm) (Red-45%, Black-45% & Green-10%).[SOR-2021 for S&T works- Sch 'B2' item no.1(ii)(e)]
2
122245
244490
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest amendment. Inspection by Rep. of Railway Engineer. 1x 2.5 Sq mm flexible wire (Red- 15%, Black-50% , Green-20%, blue-7.5% & Yellow- 7.5 %).[SOR-2021 for S&T works- Sch 'B2' item no.1(ii)(b)]
2
35877
71754
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest amendment. Inspection by Rep. of Railway Engineer.1x 4.0 sq mm flexible wire (Red-50%, Black-50%).[SOR-2021 for S&T works-Sch 'B2' item no. 1(ii)(c)]
2
39683
79366
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest amendment. Inspection by Rep. of Railway Engineer. Multi strand ISI copper cable (10 Sq.mm ) (Red-50%, Black-50%).[SOR-2021 for S&T works-Sch 'B2' item no. 1(ii)(d)] 6
6
116166
696996
... More
20 pair CT Box. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B2' item no. 19]
10
2419
24190
... More
Non-deteriorating type low voltage electric fuse for Railway signalling, rated voltage 240 V AC/DC fuse with cylindrical cap without indication size :14x 51 mm. Spec. no: IRS-S-78/92 with latest amendment if any. Inspection by RDSO. 1Amp fuse cartridge. [SOR-2021 for S&T works-Sch 'B2' item no. 4(a)(i)]
30
65
1950
... More
Non-deteriorating type low voltage electric fuse for Railway signalling, rated voltage 240 V AC/DC fuse with cylindrical cap without indication size :14x 51 mm. Spec. no: IRS-S-78/92 with latest amendment if any. Inspection by RDSO. 4Amp fuse cartridge. [SOR-2021 for S&T works-Sch 'B2' item no. 4(a)(iii)]
250
81
20250
... More
Non-deteriorating type low voltage electric fuse for Railway signalling, rated voltage 240 V AC/DC fuse with cylindrical cap without indication size :14x 51 mm. Spec. no: IRS-S-78/92 with latest amendment if any. Inspection by RDSO. 16Amp fuse cartridge. [SOR-2021 for S&T works-Sch 'B2' item no. 4(a)(v)]
20
79
1580
... More
Fuse Block for above fuse cartridge, Spec. no: IRS-S-75/2006(rev-2) with latest amendment if any. Inspection by RDSO. [SOR-2021 for S&T works-Sch 'B2' item no. 4(b)]
200
189
37800
... More
ARA terminal for Signalling Installation with PBT materials . Inspection by RDSO.6 Way (ARA terminal) Drg No.SA- 23756 Alt3, Specn No. IRS-S-75/2006 (Rev.-2) with latest amd. [SOR-2021 for S&T works-Sch 'B2' item no. 5]
4500
361
1624500
... More
Wago / phoneix terminal blocks (Part no.280-874). 4 conductor disconnect terminal block. Inspection by Rep. of 12 Railway Engineer. It includes :(i) 4 conductor disconnect terminal block for test and measurement, 0.08 mm.sq.- 2.5mm.sq., Centermarking with slot test for test plug dia 2mm/0.079 In and dia 2.3mm/0.091 in Carrier rail din 35: front-entry; with knife disconnect large cage clamp connection, grey.(ii) End and intermediate plate, 2.5 Mm/0.394 in wide carrier rail din 35, grey (Wago part no. 249- 117)(iii) Screw end stop for carrier rail(iv) steel carrier rail;35 X 7.5 mm, 1 mm /0.039 in thick; unslotted (Part no. 210-229/PW11- 0000).(v) WSB quick marking system; horizontal; 1 ... 10 (10x); for width 5-17.5 Mm; 10 strips of 10 marker per strip (100) per card; consecutive numbers white (Part no. 209 - 502S).(vi) Adjacent jumper nominal current 24A; Insulated Grey.[SOR-2021 for S&T works- Sch 'B2' item no. 6(a)]
12000
76
912000
... More
Polymeric Positive Temperature co-efficient device self restoring type 6 Amps, 16 V DC with soldering of 16/0.2 copper 13 wire leads and crimping of copper pin type lugs suitable for Railway signal and Telecom applications. Technical details (i) Holding current- 6Amps, (ii) Max Fault current rating- 100 Amps, (iii) Trip current- 10.2 Amps, (iv) Max time to trip time- 3.3 sec. (v) Max power dissipation - 2.8 watt, (vi) Max resistance= 0.028 ohms, (vii) Minimum resistance = 0.01 ohms, (viii) Max. Voltage rating = 16 VDC. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B2' item no. 4(c)]
20
48
960
... More
Key lock 'E' Type with key Drg. No.-SA-3376/M. Alt-2. Spec No. IRS-S-30/64 different ward. Inspection by Rep. of Railway Engineer. [SOR-2021 for S&T works- Sch 'B2' item no.7]
10
1750
17500
... More
Supply of disitilled water plant/Demineralised palnt of (10-50-100 liter per hour) make Laptech/shivam or indicated by Railways. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B2' item no. 18]
1
27468
27468
... More
200- Way Tag Block Spec.IRS-S-77/91 with latest amdt & with Drg.No.SA-24751, 52, 53. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works- Sch 'B2' item no.13]
10
3096
30960
... More
Flasher & Hooter for LC gates (1 set shall comprise for 1 level crossing). Inspection by Rep. of Railway Engineer.[SOR- 2021 for S&T works-Sch 'B2' item no. 8]
2
10682
21364
... More
Supply of different type of dominoes complete with button assemblies and indication to suite for modification of the existing operation cum indication panel as per approved Front Plate Diagram. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B2' item no. 21]
20
2332
46640
... More
Supply of the following furniture for SM / relay room. Inspection by Rep. of Railway Engineer.Chair. Model PCH- 5001T(Revolving) or Godrej Aero or latest. Make: Godrej .[SOR-2021 for S&T works- Sch 'B2' item no. 12(a)]
8
14405
115240
... More
Supply of the following furniture for SM / relay room. Inspection by Rep. of Railway Engineer.Table of Godrej make. Model No. WT 718 + ERU or latest. [SOR-2021 for S&T works- Sch 'B2' item no. 12(b)]
5
14375
71875
... More
Electric Key Transmitter (RKT) single Drg. No. : SA -22601(Adv.) Alt.4 with ward No. 2 to 9, spec. no: IRS-S - 21/2001 with latest amendment. Inspection by RDSO.[SOR-2021 for S&T works-Sch 'B2' item no. 9(a)]
5
6172
30860
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendment. Inspection by RDSO. Indoor cable as per IRS-S-76/89 with latest
0.5
-
73734.5
... More
Relay, Non-AC Immune, plug-in type, Style "QN1", Neutral line, 24V DC 12F/4B contacts, front and back contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:930, IRS:S 34 & IRS:S 23. The interlocking code for this unit shall be ABCDE. Inspection by RDSO.[SOR-2021 for S&T works- Sch 'B3' item no.1(a)]
100
3821
382100
... More
Relay, Non-AC Immune, plug-in type, Style "QN1', Neutral line, 24V DC 8F/8B contacts, front and back contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:930, IRS:S 34 & IRS:S 23. The interlocking code for this unit shall be ABCDF. Inspection by RDSO.[SOR-2021 for S&T works-Sch 'B3' item no. 1(b)]
200
3821
764200
... More
Relay, AC Immune, plug-in type, Style "QNAI'', Neutral line, 24V DC 8F.8B contacts, front and back contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:931A, IRS:S 60, IRS:S 34 & IRS:S 23.The interlocking code for this unit shall be ABDGH. Inspection by RDSO.[SOR-2021 for S&T works- Sch-B3-1(d)]
150
4032
604800
... More
Relay AC immune Plug in type Style'QNNA1', twin neutral line,24VDC 4F/4B contacts each for LH and RH, front and back contact metal to carbon , complete with plug board, retaining clips and connectors conforming to BRS:960,IRS:S 60, IRS:S 34 & IRS:S 23. Interlocking code of this unit shall be ACDHJ. Inspection by RDSO.[SOR-2021 for S&T works- Sch-B3-1(f)]
200
5085
1017000
... More
Relay Plug in type Style'QL1', Magnetically latched neutral line, 24VDC 11F/4B contacts each, front and back contact metal to carbon , complete with plug board, retaining clips and connectors conforming to BRS:935A, IRS:S 34 & IRS:S 23. Interlocking code of this unit shall be ABDEG. Inspection by RDSO.[SOR-2021 for S&T works-Sch 'B3' item no. 1(g)]
10
6770
67700
... More
Relay Non- AC Immune, Plug in type, style 'QNN1', twin neutral line, 24V DC, 6F/2B contacts, each for LH & RH, front & back contacts metal to carbon, complete with plug board, retaining clips and connectors, conforming to BRS: 960, IRS: S 34 & IRS : S23.The interlocking code for this unit shall be ACDEK. Inspection by RDSO.[SOR-2021 for S&T works-Sch 'B3' item no. 1(l)]
350
4944
1730400
... More
Universal relay, plug in type, style AC/LED all aspects AC lamp proving relay unit with in built current transformer type, 7 slow release neutral line relay 4F/4B contacts, front and back contacts metal to carbon, shall be suitable for working in series with the 110AC LED signal lamp rated at 15W conforming to RDSO specn. no. BRS:941A , STS/E/RELAYS/AC LIT/LED Signal/09-2002, Amdt-1 with latest. Inspection by RDSO.[SOR-2021 for S&T works-Sch 'B3' item no. 1(m)]
500
5015
2507500
... More
Relay, AC Immune, plug-in type, Style "QNA1K", Neutral line, 24V DC 1000 ohms 6F.6B contacts, front and back 8 contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:931A, IRS:S 60, IRS:S 34 & IRS:S 23 & RDSO Spec. no. STS/E/Relay/UEA(PI). The interlocking code for this unit shall be CDEKY. Inspection by RDSO.[SOR-2021 for S&T works-Sch 'B3' item no. 1(n)]
500
4804
2402000
... More
Relay Flasher, (Anuvidyuat make or Similar) Electronic solid state input 24V. DC at 40/60 flashes per minute. Specification No.RDSO/SPN/173/2002. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works- Sch-B3-1(q)]
-
-
9
... More
Timer Relay Fail safe type of electronic time delay device - 24 Volt DC (Anuvidyuat make or similar) for Rly. Signalling as per Spec. No. IRS:S-61 with latest amendment. The interlocking code pin for this unit shall be AFHKY. (with a time setting of 60 seconds). Inspection by RDSO.[SOR-2021 for S&T works-Sch 'B3' item no. 1(t)]
10
2544
25440
... More
Electronic Magneto telephone desk type to Specn No.IRS-TC-79/2000. Inspection by Rep. of Railway Engineer.[SOR- 2021 for S&T works-Sch 'B3' item no. 3]
15
4414
66210
... More
Supply of fault analysis software for RTUs/Datalogger. The work to be executed as per directives of the Rep. of Railway Engineer. Inspection by Rep.of Railway Engineer.[SOR-2021 for S&T works-Sch 'B3' item no. 15
5
16253
81265
... More
Hand Operated Earth tester 4 terminal type with complete testing kit, carrying case and manufacturer calibration test certificate, Nippen make or similar, Range : 0-10 Ohms. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B3' item no. 32]
2
7330
14660
... More
Hand Operated Insulation tester with test lead, carrying case and manufacturer calibration test certificate, Nippen make or similar, Range : 100 Volt, 100 M Ohms . Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B3' item no. 33]
1
6178
6178
... More
Hand Operated Insulation tester with test lead, carrying case and manufacturer calibration test certificate, Nippen make or similar, Range : 500 Volt , 200 M Ohms . Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B3' item no. 34]
1
6530
6530
... More
Installation and wiring of protocol converter to suit with the dataloggers of the station.[SOR-2021 for S&T works- Sch 'B3' item no. 8(b)]
10
3208
32080
... More
Supply of datalogger system for Railway S&T installation as per RDSO specification no. IRS:S-99/2006 (amendment - 3) or latest with -Digital Input 512, Analog Input 64. Inspection by RDSO.[SOR-2021 for S&T works-Sch 'B3' item no. 5(a)(i)]
3
497388
1492164
... More
Installation, wiring, testing and commissioning of Digital Input 512, Analog Input 64 datalogger system as per RDSO 18 specification no. IRS:S-99/2006 (ammedent - 3) or latest including networking and central monitoring along with installation of remote monitoring software and hardware. The contractor is also required to list out the no. of analog & digital inputs for wiring & operation of the datalogger by taking approval of the Rly. for those inputs. This includes training to 4 staffs at site.[SOR-2021 for S&T works-Sch 'B3' item no. 5(b)(i)]
3
29408
88224
... More
Electrically operated lifting barrier complete as per RDSO SPN no. 208/2012 Ver-2 with latest Amendment, operating voltage 110V AC, without hand generator, length of the boom is 9.76 meter / 32 feet . Inspection by RDSO. Note:- Spare shall also be supplied as per RDSO specifications (rates for them are included above). [SOR-2021 for S&T works- Sch 'B3' item no. 9]
2
548759
1097518
... More
Earthing and bonding system as per RDSO Spec. No. RDSO/SPN/197/2008 , RDSO Drg. No. SDO/RDSO/E&B/001 dt. 19.09.08 and RDSO Drg. No. SDO/RDSO/E&B/002 dt. 19.09.08. Earthing and bonding system for Relay Room, IPS Room, SPD Box, Operator panel in SM's room, signalling equipments in Station building, Block circuit, SSDAC, etc. Inspection by Representative of 20 Railway Engineer. Supply of "Permanent and Maintenance Free Earth pits materials". 1 Set PMF earth pit consisting of:17 mm diameter and minimum 3 m long Copper Bonded Steel Rod - 1No, GEM- 25 lb - 3 Bags, 25*6*150 mm Cu Bus Bar- 2 No, Cu lugs and nut bolt 2 nos, Supply for Connection between Earth pits and MEBB It includes 35 sq mm multi-strand pvc insulated single core Cu cable (15 mtr Lump Sum). Supply for Internal connection from MEBB To SEBB and to other equipments. (50 mtr Lump Sum).It includes 16 sq mm and 10 sq mm multi strand pvc insulated single core Cu cable. [SOR-2021 for S&T works- Sch 'B3' item no. 7(A)]
10
23526
235260
... More
Installation, testing and commissioning of Permanent and Maintenance Free Earth pits. Installation charges : Earth pit (1 Set) It includes, Civil works related to earth pit digging, PMF earth pit installation,,backfilling and chamber making. Materials for chamber including Chamber Cover. [SOR-2021 for S&T works- Sch 'B3' item no. 7(B)]
10
5882
58820
... More
Control Panel for Mid section interlocked LC Gate/IBS(operation-cum indication console Domino type)/ Siding motor operated point operation pannel /Non Interlocking pannel to RDSO Spec. No. 36/87 size of each domino will be 54+10mm X 34+7mm. 22 25% panel LEDs, all type of dominos and buttons assemblies compleate as spare to be supplied. This includes cable termination MS rack with 3/4" thick wood strips including fabrication thereof as per the requirement of the Rly. terminations of cables, fix of terminal blocks, terminals, painting and lettering as required. Inspection by Rep. of Railway Engineer.Note:-MS angle/flat, teak wood, bolts & nuts, screws, shelves etc. required as above shall be supplied by the contractor.[SOR-2021 for S&T works-Sch 'B3' item no. 11]
2
44258
88516
... More
Supply of VF tapping termination transformer to specification IRS-TC-22/76 for 470:1120. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B3' item no. 23]
15
1106
16590
... More
Supply of fuse indication cum monitoring and automatic changeover system as per RDSO specification no. 24 RDSO/SPN/209/2012 Rev. 0 or latest. The system shall be supplied along with all standby fuses placed in the system. In addition to it, spare quantity of 100% fuses of each type shall also be supplied along with the system. Inspection by RDSO. For 32 fuses per set (Upto 4Amps). [SOR-2021 for S&T works-Sch 'B3' item no. 24(a)]
30
37882
1136460
... More
Transportation, installation, testing & commissioning of fuse indication cum monitoring and automatic changeover system as mentioned above.[SOR-2021 for S&T works-Sch 'B3' item no. 24(b)]
30
9469
284070
... More
Supply Fire Alarm System of Microprocessor based intelligent, addressable, modular, 1 loop (minimum 125 detector/devices per loop expandable to 2 loops) Fire Alarm Control Panel with LCD display with 320 Character with soft keys for displaying alarm, events and operating functions, Day/ Night operation function, Remote maintenance service feature etc. The panel should be multi-protocol ie able to support at least 2 additional different makes of addressable detectors. The panel should have 26 minimum two relay outputs & 1 Monitored Sounder Output. It should have provision to be connected to repeater panels in future. The panel shall capable to operate on 240 volts AC power supply, automatic battery charger, 24 volts, sealed lead acid maintenance free batteries sufficient for 24 hours normal working and then be capable of operating the system for 30 minutes during emergency condition as per detailed specifications complete as required. Panel Should Be VdS/UL/FM/EN/LPCB Certified as per RDSO Specification No. RDSO/SPN/217/2018 Ver 2 or latest. Inspection by Rep. of Railway Engineer. [SOR-2021 for S&T works-Sch 'B3' item no. 27(i) and its Annexure E in SOR]
3
83776
251328
... More
Supply programmable for timed of automatic Analogue sensitivity Addressable selection Multisensor with base, Detector and other with multiple accessories sensitivity as required (adjustable and Detectors at site) shall levels,be dS/UL/FM/EN/LPCB listed. The detectors shall comply to the RDSO/SPN/217/2016 Ver 1 or latest. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B3' item no. 27(iii)]
50
3712
185600
... More
Supply of Manual call points, Push type & resettable with key, with In-built isolator. Shall be VdS/UL/FM/EN/LPCB compliant and shall comply to the RDSO/SPN/217/2016 Ver 1 or latest. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B3' item no. 27(iv)]
3
5712
17136
... More
Supply of Output Module which will provide potential free (NO/NC) contact to existing Data Logger. Complying to the 29 RDSO/SPN/217/2016 Ver 1 or latest. Note:- The contractor will provide potential free contact for goomty and Relay Room only. The connectivity with existing data logger will be done by Railway. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B3' item no. 27(v)]
6
8949
53694
... More
Supply of Hooter cum Strobe complying to the RDSO/SPN/217/2016 Ver 1 or latest. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B3' item no. 27(vi)]
3
7806
23418
... More
Supply of 2C 1.5 sq mm twisted shielded armoured copper cable. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B3' item no. 27(vii)]
1000
124
124000
... More
Installation, Testing and commissioning of items 26 to 31 as per requirement at site. The work will execute as per instruction of representative of Railway Engineer.[SOR-2021 for S&T works-Sch 'B3' item no. 27(ix)]
3
17553
52659
... More
Supply of Door Proximity switches alongwith 2 way rigid converter for wire termination between proximity switches and Datalogger Tag Blocks as per specs. Inspection by representative of Railway.[SOR-2021 for S&T works-Sch 'B3' item no. 17]
10
669
6690
... More
Supply of Remote terminal unit with 128 digital & 16 analog inputs with modem as per RDSO spec.no - IRS-S- 99/2006 or latest. Inspection by RDSO.[SOR-2021 for S&T works-Sch 'B3' item no. 14(a)]
1
240611
240611
... More
Installation, Wiring, Testing and commissioning of Remote terminal unit with 128 digital & 16 analog inputs with modem as per RDSO spec. no - IRS-S- 99/2006 or latest. [SOR-2021 for S&T works-Sch 'B3' item no. 14(b)]
1
24061
24061
... More
Supply of protocol converter to suit with the dataloggers of the station. Inspection by Rep. of Railway Engineer.[SOR-
10
12833
128330
... More
Transportation including loading/unloading of HDPE pipe from the stores of railway to the work site, laying of the same in excavated trench/already laid GI/RCC pipes/tubes, jointing, levelling and end sealing the pipes. [SOR-2021 for S&T works- Sch 'C' item no. 6]
140
7762
1086680
... More
Transportation, loading/unloading of OFC from the stores of railway to the work site with care, pushing/pulling OFC through the HDPE pipes, sealing of the duct by sealling /caps plugs. The cable is to be laid by mechanised means. At inaccessible 2 places where mechanised laying is not possible, the cable is to be laid manually. This also includes testing of cable drums in the store premises before transportation and submissions of results thereof. Empty cable drums to be returned by the contractor. The cable drums with unused cable at site to be returned by the contractor to the stores depot of SSE/Tele-Works/BSP.[SOR-2021 for S&T works- Sch 'C' item no. 7]
140
18672
2614080
... More
Transportation, installation of optical fibre joint closure and splicing of Optical fibre cable (2 x 24 fibres) and testing, Optical fibre cable splicing shall be done in the presence of Railway's representative. Only joint closure shall issued by the Railway. All 3 other tools/test equipments required shall be arranged by the Contractor. This also includes excavation of earth for construction of masonary pit of bricks (inside complete plastered), the inner size of pit 1.2m x 1.2m (depth 0.75m) in all types of soils for keeping cable coils at the location of OFC joints, filling the pit with sand after jointing of cables, ramming and covering with RCC slab as per Drg. and instructions of site incharge of Railway. [SOR-2021 for S&T works- Sch 'C' item no. 11(a)]
10
19019
190190
... More
Transportation, installation of Optical Fibre termination box(FDMS/FMS)and splicing of Optic Fibre Cable (24 fibre) 4 inside the termination box with provision of taking out fibre of OFC as required. This includes supply of installation accessories (as required) as detailed in technical specification and advised by Railway's Engineer-at-site. This also includes End to End testing of all fibres of the optical fibre cable terminated between cable hut to cable hutof each station. [SOR-2021 for S&T works- Sch 'C' item no. 11(b)]
20
21705
434100
... More
Supply and fixing of PVC casing capping 25mm x 25mm size for indoor wiring. This includes drawl of wires in the casing capping and termination of wire at end point. The work should be carried out as per the instruction of Railway site Engineer. [SOR-2021 for S&T works- Sch 'C' item no. 24]
200
43
8600
... More
Transportation & Execution of following kinds of joints on Quad Cable using thermoshrink jointing kit. This also includes excavation of cable joint pit of size 1.2m x 1.2m x 1.0m in all types of soil for jointing of copper cables, back filling and ramming after jointing. i) straight through joint on Quad cable/10-20-50 pairs PIJF Cable [SOR-2021 for S&T works- Sch 'C' item no. 12(b)]
45
1385
62325
... More
Transportation and fixing of following types of C.T.Box and termination of cable as per details of jointing schedule approved by the Railway Engineers -50 pair Cast Aluminium C.T.Box (Including supply and Inspection by representative of Railway Engineer). [SOR-2021 for S&T works- Sch 'C' item no. 13(c)]
10
3803
38030
... More
Cutting of solid rocks making channels 150 mm wide at the bottom X 200 mm deep by chase cutting & concreting upto the ground level after cable laying/ placing HDPE pipe. [SOR-2021 for S&T works- Sch 'C' item no. 2(d)]
2000
432
864000
... More
Location survey of cable route and preparation of tentative and final cable route plan as per approved format in the section including supply of final route plan after the cables are laid and commissioned indicating clearly the exact position of the cable, joints and other critical items with reference to OHE mast & other fixed point, etc. in 12( twelve) Nos. hard bound copies on white bond paper of maximum A-3 size (well documented and bound with plastic covers).[SOR-2021 for S&T works- Sch 'C' item no. 1]
-
-
9
... More
Excavation of trenches including clearing of roots of trees etc. in hard/rocky soil by chiseling up to a depth of minimum 10 0.6 Mtr. and width 0.3 Mtr. at the bottom, supply and placing RCC hume pipe section as per drawing on sieved soil of 30mm over cable / HDPE pipe and concreting through- out the length upto a layer of 75mm. Then back filling the trench and then ramming of soil
14
336450
4710300
... More
Supply of Optical fibre joint closure for straight through joint with modification for 24 fibre OFC as per Specification. No. RDSO/SPN/TC/68/2013 (with latest amendment) complete with all accessories (sealing with mechanical clamp facility) make Raychem or similar. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works- Sch 'D' item no. 1]
10
3483
34830
... More
Supply of covered 19" racks (2200MM(H)X600MM(W)X600MM(D).) complete with all fittings for housing the sub-rack 2 SDH ADMs & PD MUXs( as per instruction of railway ) fully wired including Power Supply Distribution system, rack exhaust fan(48vdc) and other installation accessories for installation. Note : It should have door on both sides with locking arrangement. (Make: APW or RITTAL or similar) Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works- Sch 'D' item no. 16]
6
62049
372294
... More
Supply of Universal Thermoshrink Jointing kit for derivation/transformer joint for Jelly filled Six quad cable conforming to RDSO Spec. No.: IRS-TC-77/2006 (Rev.-1) (with latest amendment). Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works- Sch 'D' item no. 3]
60
3425
205500
... More
Supply of loose tube fibre pigtail with suitable connector as per site requirement each of 8 Mtrs. Length as per TEC Specification No. G/OFJ-01/03 JUN 99 (With latest amendment). Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works- Sch 'D' item no. 10]
200
1352
270400
... More
Supply of UTP CAT 6 Cable (Roll is 305 Mtr). Make D Link, Amp or Molex. Inspection by Rep. of Railway Engineer.[SOR- 2021 for S&T works- Sch 'D' item no. 20]
3315
37
122655
... More
Supply of VF Tapping Transformer 1120:1120 (rack mountable) as per specification No. IRSTC-22/76(With latest amendment). Inspection by Rep. of Railway Engineer. [SOR-2021 for S&T works- Sch 'D' item no. 5(b)]
30
1120
33600
... More
Supply of PVC switch board cable 5 Pair, conductor size 0.6mm, conforming to IRS-TC-24/91 or ITD 1139.Inspection by Rep. of Railway Engineer. [SOR-2021 for S&T works- Sch 'D' item no. 12(a)]
500
24
12000
... More
Supply of PVC switch board cable 10 Pair, conductor size 0.6mm, conforming to IRS-TC-24/91 or ITD 1139.Inspection
500
39
19500
... More
Execution of all works as per Indian Railway Unified Standard Specifications (Works & materials) connected with the work covered under S.E.C. Railway USSOR (Works & Materials)2010. This is the tentative value of works to be executed against different sections of SECR BSP Division for guidance of tenderers (Item Directory -SECR-HQ-USSOR-2010).
-
-
23182706.3
... More
Alteration of existing Data Logger, then testing and commissioning of the DATALOGGER as per RDSO's Spec. including 3 networking and central monitoring along with installation of remote monitoring software and hardware. The contractor is also required to list out the no. of analog & digital inputs for wiring & operation of the datalogger by taking approval of the Rly. for those inputs. NOTE: The contractor has to supply all the hardware & software required for networking & remote monitoring at his cost including training to 4 staffs at site. 4
20
8316
166320
... More
Transportation, installation, testing & commissioning of Earth Leakage Detector as mentioned (4 Nos channel).
20
7080
141600
... More
Transportation and fixing of illuminated A/AG Marker/calling-on signals/dependent shunt signals with enameled markers including drawing of cable through the signal post, termination of cables, wiring, fixing of calling- on/shunt signal legend board, lamp/LED unit, two coat painting and lettering, testing and commissioning as required. NOTE: i) The foundation for position light shunt signal post as mentioned in item above shall be in accordance with Drg. No. Con/SK/T/13. ii) 4 Nos. of foundation bolts for each foundation for above shall be of size 20 mm x 305 mm to Drg. No. SA-110A/M with one nut and one washer each per bolt & shall be supplied by the contractor. iii) All the materials required for installation, wiring, testing & commissioning of calling on signals, dependent/independent shunt signals, other than, will have to be supplied by the contractor. These sundry materials such as cement, sand, stone chips 1", bricks, nuts and bolts, washers and screws, eyelets of sizes, PVC bunching tape and button, soldering materials, screen with MS frame, calling on legend board as per Drg. supplied by the Railways, paints, M.S clamps with SS nuts and bolts for fixing of cable etc., and other such sundry materials required for the work shall be supplied by the contractor. The contractor has to supply the lamp replacement register with details filled therein format supplied by the railways in printed well bound register. iv)Contractor has to fix markers/legend boards on signal posts as per the instruction of Railway site engineer. 6
120
2376
285120
... More
Installation, Testing & commissioning of the Data concentrator 7
1
10000
10000
... More
Installation, Testing & commissioning Dual Media Converter.
8
2000
16000
... More
Supply and Fixing of Perforated GI pipes of 100 mm dia for entry of cable on girder bridges, RCC bridges, drains, culverts, rocky places, tunnels/ deep cuttings or at places as advised by the engineer in charge of the work. This includes trenching up 8 to the required depth as decided by the Engineer at site and making holes of 5 mm dia (approx.) at 20 cm intervals on the GI pipe. The pipes are to be fixed on the girderbridge by suitable bridge fixtures at an interval of 1.0 mts. (min) or directives of Railway Engineer. On RCC/masonry bridges or in rocky places, if required the entire length of the pipe is to be concreted up to a height of 100mm above the pipe. GI pipe shall be TATA or Jindal make.
1000
1246
1246000
... More
1) Provision of Simulation arrangement (Track and Point etc Simulation board as well as signal lamp simulation board) 2) Complete wiring arrangement of free Home, Advanced Starters, IBS etc. as may be required with or without Block working with required temporary relay wiring for controlling the train movement in NI - period with the provision of temporary miniature operation 9 cum indication panel board including sitting & other necessory arangement for staffs to carry out testing. 3) Deputation of Manpower & other logistic and necessory arangements round the clock in BPNI/PNI/NI period for assisting simulation testing for all the routes as per approved RCC by the Railway officials. 4) Mobilization of additional man power for attending to the Pre-NI block and commissioning of the station within prescribed time limit of NI- Period and decided by Railway officials. (Note:25% Payment will be done for each part of the work as mentioned above.)
9
300000
2700000
... More
Providing services of helping hand man power to carry out miscellaneous/sundry works in the office/field and accompanying Railway staff with all expenses of transportation, accommodation, food, consumables etc., with all ascents/descents, taxes, octroi, cess, fees, duties, with contractors tools.
3000
515
1545000
... More
SPLICING/DROPPING/TERMINATION of each fiber/pigtail in the FDMS/LIU/IOBOX/TERMINAL JOINTS through fusion splicing for termination of OFC cables. The Fibres terminated shall be tested and test report (Hard copy and Soft copy) shall be submitted to the Railways site Incharge for records. Each fibre shall be properly marked with necessary ferrules/tags. 12
500
100
50000
... More
Installation and commissioning of 9U rack 19" size. All materials required are supplied by the contractor.
20
801
16020
... More
Concreting of Chasing ratio 1:3:6 cement, sand & stone of size 20mm approximate height of 80mm built on wire mesh 14 of minimum 19 SWG of across area section 50 mm. works is to be executed as per the instruction of Railway site engineer. (The width & height of concreting is to be decided by the site incharge as per the site condition) all materials required for the execution of the work is to be.
50
6467
323350
... More
Tracing & testing of existing cables (OFC & 6 Quad) for identification of faulty location with the deployment of LABOUR for digging pits, OTDR Tools, like megger, cable fault, locator, cable route tracer, OFC splicing Machine supported.
10
5000
50000
... More
Removal of Rail (13 m) in the way of cable route trench, signal/location box foundation, track crossing etc. In case of less or more than 13 m, proportionate payment to be done. This obstruction will be removed by the contractor for ensuring proper execution of related works.
2000
97
194000
... More
Removal of PSC/Wooden/Steel sleeper in the way of cable route trench, signal/location box foundation, track crossing etc. This obstruction will be removed by the contractor for ensuring proper execution of related works.
2000
98
196000
... More
Excavation of Jointing Pit without damaging the fibre and provision of joint chamber of 1.2mtr dia, 60 cm height 50mm 18 thickness with two piece top cover and bottom cover with holes for drainage and cable entry (the reinforcement drawing enclosed). This includes back filling and ramming of the trench after placing the joint closure and cable loop in the chamber without causing any
50
8662
433100
... More
Supply of PVC flexible cable Multistrand wire Copper conductors cross section 25 Sq.mm x 1Core as per RDSO specification No. IRS:76/89 with latest Amendment if any Inspection by Rep. of Railway Engineer.
1
231000
231000
... More
Supply of Earth Leakage Detector (4 CHANNEL) as per RDSO specification no. RDSO/SPN/256/2002 or latest having 6 2 digit counter, 12 Channel bus bar voltage of 110 V / 60 V / 12 V in AC DC measurement in 19" sub rack along with insulation resistance meter, remote indication & buzzer in ASM room at station of Bilaspur/Raipur/Nagpur Division. The tenderer should submit three years warranty certificate along with supply of material. Inspection by RDSO.
20
70800
1416000
... More
Supply of indicating type 0.6A fuse inserts without holder (material will be supplied only from approved vendor of RDSO) as per IRS spec. IRS:s:78/92 or latest. INSPECTION BY REP. OF RAILWAY ENGINEER.
200
20
4000
... More
Supply of indicating type 0.6A fuse inserts with holder (material will be supplied only from approved vendor of RDSO) as per IRS spec. IRS:s:78/92 or latest. INSPECTION BY REP. OF RAILWAY ENGINEER
600
61
36600
... More
Supply of Signal Unit Housing for 'A'/AG marker. Inspection by Rep. of Railway Engineer.
-
-
5
... More
Supply of 24F fully loaded FMS suitable for Railway's OFC System Complete with 24 nos. 0db adaptor and 24 nos. 1m length Pigtails and 6 nos. 1m Pigtail on spare. All are "SC" type connectors. Inspection by representative of Railway Engineer.
20
9440
188800
... More
Supply of Optical fibre Patch cords with SC-SC or suitable connectors on both ends as per site requirement for interconnection between FMS and Optical Modem length 10 Mtrs. Each as per TEC Specification No. G/OFJ-01/03 JUN 99 (With latest amendment). Max Permissible loss - 0.2dB. Inspection by Rep. of Railway Engineer.
500
1232
616000
... More
Supply of Data Concentrator with dual modem and Media converter interface as per technical specification A5 (Annexure - G). INSPECTION BY REP. OF RAILWAY ENGINEER
1
140000
140000
... More
Supply of Dual Media Converter for Data Logger as per technical specification as per Annexure - H. Inspection By REP. OF RAILWAY ENGINEER
4
40000
160000
... More
Supply of Dual Media Converter for Data Concentrator as per technical specification as per Annexure - I. Inspection By REP. OF RAILWAY ENGINEER 15
4
40000
160000
... More
Plain Storage Almirah, Model no.-STSTW000 (Large) or latest. Make: Godrej.Inspection by Rep. of Railway Engineer.
8
24870
198960
... More
Supply and installation of smart electronic passive marker with built in RFID chip with a unique hexadecimal ID code 22.5 cm dia, minimum 1.5m depth range (GPS coordinates can be logged for each unique RFID marker) for S&T underground cable, OFC & 6 quad joints etc. make : Stanlay SLM, 3M or similar, Inspection by RITES (FOR SUPPLY PORTION)
1200
1835
2202000
... More
Supply of RFID marker locator for RFID markers burried in the trench, 8000 or more marker records, Built in GPS module, 1.5m Depth Range with LCD display Cable marker Locator. It includes Database software for exporting data. make : Stanlay SLM or similar. Inspection by RITES (FOR SUPPLY PORTION)
2
278268
556536
... More
Supply of 9U Rack with 19 inch standard dimension, wall mounting, front glass door with lock and two key, with rack fixing Multi point AC power strip, cable organiser with wall fixing screws and all other complete accessories. Inspection by Rep. of Railway Engineer.
20
5121
102420
... More
Supply of Optical Power meter(wave length, 1310 nm & 1550 nm user selectable, measuring range +3dbm to -60dbm, as per technical spec. no. GR/OPM 01/03.Jan 5.(Type B) or latest specification. Inspection by Rep. of Railway Engineer.
2
21147
42294
... More
Colour Laser printer with foll. desc. Resolution (in dpi): upto 600x600, Paper size :A4, Print speed in ppm (A4 size): 16 , Port : 1 USB, Flash Memory (in MB): 128 min., Network Card 10/100: Yes, Duplexing: NA. Make - HP,Canon, Brother, Samsung or similar. Inspection by Rep. of Railway Engineer.
2
28999
57998
... More
Supply of Digital Insulation Tester, Voltage-Multirange (100/250/500/1000VDC), Insulation Resistance: 10KOhms to 999MOhms Make: RISHABH or similar. Inspection by representative of Railway Engineer.
4
6008
24032
... More
Supply and fixing of 12U double section wall mounting rack (Depth-600mm)with all accessories including Power Distribution Panel (min. 04 nos.5A sockets) with inbuilt surge protector, fan tray, cable manager, front glass door with lock &keys and suitable mounting accessories. Make- Valrack / HCL/APW or similar. Inspection by Rep. of Railway Engineer. 25
15
11183
167745
... More
Supply of Digital Psophometer Model 1072 . Make:- Aplab or Similar. Inspection by Rep. of Railway Engineer.
1
53424
53424
... More
OTDR Wavelength (nm)1310/1550, Dynamic Range Minimum 32dB @ 1310nm and 30dB @ 1550nm, Event Dead Zone 1.5m, Attenuation Dead Zone 4m, 7 inch colour LCD Display with multi touch screen, Resolution 0.001dB, Distance Resolution 0.1m, 26 Pulse Width Range 5ns,10ns,25ns,50ns,100ns,250ns,500ns, 1μs,2.5μs,5μs,10μs,20μs, Accuracy 0.8m+0.005%, Internal storage (1GB SD card included) USB & RJ45 option, Built-in Visual Fault Locator, Built-in Optical Power Meter 850/1300/1310/1490/1550/1625nm & Range +8 -70 dBm, with AC/DC Power adapter, Software USB, Soft carry case, Additional Accessory to be provided FC/PC to FC/PC patch cord , 1 meter - 1 nos FC/PC to SC/PC patch cord , 1 meter - 1 nos. Make - Stanlay APL2+ or similar. Inspection by Rep. of Railway Engineer.
2
216388
432776
... More
Supply of Rodo meter [Analog] Spec: Mechanical 5 digits counter, ABS Plastic wheel with rubber tyre, measure Forward & Backward, Telescopic handle, Precision measuring wheel. Make/Brand: Stanley or Bosch or JCB or Freeman or Equivalent. Inspection by Rep. of Railway Engineer.
2
2489
4978
... More
Digital AC Leakage clamp-on tester Hand held type as per the following specifications: 1) AC current measurement Range: 3mA to 60A 2) Multiple selection Range: 3 or more 3) Accuracy: milli Ampere range at Lowest measurement Ampere range at 28 Highest measurement 4) Type of measurement: True rms value 5) Jaw size: minimum inner dia. 24 to 40 mm 6) Display: LCD digital reading of minimum 3200 counts 7) Range switching: Auto and manual 8) Data hold: Shall be on all ranges 9) Accessories: Battery Should provide in the meter, soft carrying case and manual 10) Safety standards: CAT. III 300V 11) Test certificate/report from OEM. MAKE BRAND- RISHABH AGAM ALCT66A or similar. Inspection by Rep. of Railway Engineer.
4
17578
70312
... More
PC based Supervisory Console with all hardware and accessories. Inspection by: Representative of Railway Engineer. Note: This system should have following features: All In One PC, Intel Core i3 12 gen, 21.5 Inch Display, Windows 11, Ram-8GB, SSD- 512 GB, 03 Yrs Warranty. Make: ACER/DELL/HP/LENOVO.
2
47164
94328
... More
Hand Held Digital multimeter. specification similar to Fluke 15B+. Acceptable make: fluke, agilent, anritsu. Inspection by Rep. of Railway Engineer.
4
9406
37624
... More
Hand Held Digital multimeter. specification similar to Fluke 106. Acceptable make: fluke, agilent, anritsu. Inspection by Rep. of Railway Engineer.
-
-
31
... More
Supply of the furniture executive Table of Godrej Model No. ARISTO Main Desk +ERU with Pedestal (210 * 225 *75 cm) with back unit type 4 (180*50*75 cm) or latest. Inspection by Rep. of Railway Engineer. 33
3
79691
239073
... More
Supply & installation of AUTOCAD LT 2024 or latest commercial single user for 3-year subscription 34
2
82411
164822
... More
Supply & Installation of Microsoft office 365 license software for one user for 24 Month validity.
2
12500
25000
... More
Cable Route locator/ cable avoidance tool having features like Power Mode 50-400Hz depth 3m, Radio Mode 10kHz- 30kHz depth 2m, Generator Mode 33+131kHz depth 5m, All Scan Mode 50Hz-33kHz depth 3m, Accurate Depth Indication, Overload Protection. Make- Stanlay DXL4 or similar. Inspection by Rep. of Railway Engineer.
3
367404
1102212
... More
Cable Maintenance Test Set having feature Cable Fault location TDR (Zero Dead Zone) (Upto 10kms), Resistive Fault Locator (Upto 60kms detects up to 20M), Multimeter (AC&DC Volts) & Loop Current, Ground resistance tester, Resistance & 37 Leakage/Insulation Resistance (1G), Capacitance /Cable length (Open meter), Cable Stress & Longitudinal Balance Test, Loop current, Circuit loss, Tracing Tone generator & reference tone, data saving & uploading to PC, with Rechargeable Li-ion battery pack, AC adapter/charger with test leads, crocodile clips & other accessories. Make - Stanlay Sidekick Plus or similar. Inspection by Rep. of Railway Engineer.
1
536900
536900
... More
Supplying & installation of chair of Godrej make (Model La Sede Visitors) or silimar make. Inspection by Rep. of Railway Engineer.
9
12633
113697
... More
Supply & Installation of rack mounted 48F FMS fibre of Bestnet make or similar of suitable connectors as per site requirement. Inspection by Rep. of Railway Engineer.
64
34500
2208000
... More
Supply and fixing of protective screen of expanded metal 12 SWG of size 1200 x 1500 mm on signals as per instruction of Railway Engineer and earthing the screen with MS flat of 2"x 1/4"using GI nut bolts and washer.
20
3137
62740
... More
Supply & Installation of OFC Joint Enclosure & Splicing of Optic Fibre (48 fibres) and testing as per technical 41 specification no. GROJC-2/02 sept 2003. Supply of splice enclosure (48 fibres) shall be as per Boards specification of TEC. All materials including fusion splicing machine used for fibre splicing and OTDR for testing and other testing materials if any shall be arranged by the contractor. Inspection by Rep. of Railway Engineer.
50
17782
889130
... More
Supply of 40mm diameter permanently lubricated HDPE telecomm ducts (with chord) as per RDSO specification 42 RDSO/SPN/TC/45/2013 Rev. 2.0 with latest amendments or latest in length of 1000mtrs/roll. For each KM. of HDPE duct following items are to be supplied (a) end plugs - 2Nos (b) cable sealing plugs - 2Nos (c) plastic couplers slip fit/push fit type - 2Nos (d) end caps to be provided along with drum - 2Nos. Colors advised for pipe is 50% bright Orange & 50% Bright Green. The following materials are
140
76811
10753540
... More
Supply of Bulk head fitting with glass dome, wire guard & 5W LED lamp and all its standard accessories. Inspection by Representative of Railway Engineer.
8
756
6048
... More
Supply of 20W LED 4' tube light fitting with tube and all its standard accessories. Inspection by Rep. of Railway Engineer.
80
510
40800
... More
Supply of 5W LED retrofit lamp B22 16 83 Numbers 93.33 Atpar 7746.67 holder base with polycarbonate body and aluminium heat sink. Inspection by Representative of Railway Engineer. 4
40
118
4720
... More
Fixing of LED tube light, bulkhead, fitting
128
13
1664
... More
Supply of energy efficient Ceiling fan (5 star rating), 1200 mm sweep along with electronic fan regulator & all accessories to work on 230 Volts AC supply. (Crompton, Usha, Havells or Konark make). Inspection by Rep. of Railway Engineer. 6
45
1342
60390
... More
Fixing & connecting of ceiling fan.
45
15
675
... More
Supply of exhaust fan of 300 mm sweep complete with heavy duty gravity flap (self open & close shutter) and all accessories to work on 230 Volts AC supply. (Crompton, Usha, Bajaj, Havells, Khaitan, Anchor or Surya make. Inspection by Rep. of Railway Engineer. 8
16
1694
27104
... More
Fixing & connecting of exhaust fan.
16
27
432
... More
Concealed wiring for lights, exhaust & fans with modular type switches : Concealed wiring with modular type switches 1.5 sq mm single core flexible FRLS copper wire as per representative of Railway Engineer.
200
460
92000
... More
Supply of 25W LED outdoor LED street light with complete fitting & all its standard accessories,comprises of pressure die cast aluminium housing powder coated in graphite grey and toughened glass. Inspection by Rep. of Railway Engineer. 11
8
2880
23040
... More
Fixing, wiring & testing of outdoor LED fitting with short arm fixture.
8
285
2280
... More
Plug and socket with mcb 20A metal clad box with metal plug and top. Inspection by Rep. of Railway Engineer.
-
-
12
... More
Concealed wiring for 20 Amps plug points with PVC pipe & PVC insulator copper conductor 4sqmm size with supply of all material.
8
851
6808
... More
Supply of 5 pin modular socket outlet with switch of 6 Amps capacity & 250V grade complete with accessories. (ABB, Havells, Wipro, Anchor, HPL or any other make that confirms to respective IS). 230V. Inspection by Rep. of Railway Engineer.
25
164
4100
... More
Supply of 5 pin modular socket outlet with switch of 16/6 Amps capacity & 250V grade complete with accessories. (ABB, Havells, Wipro, Anchor, HPL or any other make that confirms to respective IS). Inspection by Rep. of Railway Engineer.
25
251
6275
... More
Concealed Wiring for 6/16Amps plug points with Modular board with PVC insulated copper conductor 2.5 sq.mm. size with supply of all materials. 18
50
565
28250
... More
Concealed Wiring for Sub-circuits or similar wiring as per direction of Railway engineer. 19
800
157
125600
... More
Supply of MCB -16A D.P.9KA. with metallic housing. Inspection by Rep. of Railway Engineer.
20
546
10920
... More
Supply of DP MCB 32 A MCB complete with sheet steel enclosure , powder painted. Inspection by Rep. of Railway Engineer.
15
720
10800
... More
Supply of MS distribution box of size 200 x 200 x 120 mm with 2 Nos suitable size aluminium busbar arrangement of 100 Amps capacity. Inspection by Rep. of Railway Engineer. 23
10
1485
14850
... More
Fixing & Installation of MS distribution box.
10
187
1870
... More
Fixing of Junction Box.
6
85
510
... More
supply of wall mounted 4 way metallic sub-distribution board with 04 Nos 250V,16A SP MCB, busbar, neutral and earthing arrangement etc. Inspection by Rep. of Railway Engineer.
8
1434
11472
... More
Supply & Installation of New Universal RO water purification system with inbuilt water cooler as attached specification. Inspection by Representative of Railway Engineer.
1
46500
46500
... More
Supply of Armoured Cable with aluminium conductor PVC inner sheathed, heat resisting insulation armoured. No of cores -4, armoured type-strip, type of sheath-FR grade, Size in Sqmm. - 25.
100
201
20100
... More
Autochangeover panel for colour light signalling supply of 63 Amp as per RDSO specn. PI/SPC/PSI/CLS/0021 including
3
35700
107100
... More
Design and supply of Electronic Interlocking (EI) system for automatic signalling in HOT standby mode as per RDSO specification no. RDSO/SPN/192/2005 with latest amendment and Special Instructions for Schedules & technical conditions. It consists of Central processing equipment, object controller, Interfacing Equipment as per RE requirements Dual operator VDU (two nos. of industrial grade 55" 4K VDUs at each station for each side of block section) & Maintenance Terminals (industrial grade 55" 4K) with laser printer at Station & Auto goomty. It includes Embedded PC (as per Annexure-D) for each VDU. Supply of Interconnecting cables 1 and jumper wires, housing of EI Equipment and Relay Racks, Fixture, mounting arrangements and accessories necessary to make the EI system functional is part of this schedule. Supply of Class 'A' protection for each new EI room/goomty. This includes the supply, of associated cards, supporting software and drives etc. for the above arrangement. The optical fiber management and diagnostic analysis system shall be provided (As per Annexure-F). Supply of necessary Instruments and Tool Kits (As per Annexure-E) required for trouble shooting and repair of hardware and software. All interface relays for EI shall be supplied by Railways. Supply of 10% of main equipment module as essential spares is also included. All necessary drawings i.e., IFC, ALC etc. are part of this. All completion drawings must be submitted on tracing paper along with 2 sets of paper copy. Calculation of BITs will be done as per Annex-A. Tentative SIP/typical plan is enclosed.
1450
-
87419050
... More
Modification/Alteration in existing yard El (Electronic Interlocking) as per latest RDSO guidelines/TAN/SECR guidlines & practices as per approved SIP and circuit diagrams. It includes: Design and modification in existing IFC, ALC etc. of El system, modification in the VDU (Video Display Unit), LCP(Local Control panel), CCIP (Control cum Indication Panel) interface, Maintenance terminal, Relay rack wiring, wiring & modification of Data Logger, connecting new racks to earthing & bonding. All the required 2 materials (Interface cards/relays/wiring material/connectors/fuses/communication devices, power supply modules, material for earth connection etc.) shall be provided by the contractor. The work also includes the supply of modified Selection table, Interface Circuits, logic circuit, VDU/LCP/CCIP diagram etc. It also includes the carrying out all necessory testings i.e., FAT, SAT (if applicable) etc. jointly with Railways and satisfactory commissioning. All plans/drawings/circuits etc. should be prepared on AUTOCAD, softcopy to be supplied on Pen Drive and 02 sets of paper copies anlog with tracing paper to be supplied. Calculation of routes will be done as per Annex-A.
-
-
47484848
... More
Installation, wiring, Programming, testing (FAT & SAT as applicable) and commissioning of new EI equipment with 'Hot 3 Standby' architecture supplied as per item no.1. It includes transportation of materials from consignee depot to site, erection andgrouting of EI Relay Racks, fixing and wiring of all the interfacing relays (Vital & Non-Vital), installation and wiring of Microprocessor equipment, interface equipment, power supply equipment, class A protection and all other associated accessories including installation of software to make complete EI system to be functional. It also includes installation & commissioning of VDUs, NMS for OFC etc. There must be Optical Fiber link with loop back (Protection ring) between Station to Station/Auto goomty/end goomty (As per the SECR typical & practices). Contractor must arrange simulator/simulation testing panel & other necessary arrangements for testing and commissioning. This also cover the networking of built in EI Data to the datalogger via protocol converters. This should be done as per original manufacturer's or RDSO or Railways specification & guidelines.
9
625674
5631066
... More
Training of Railway personnel in installation, commissioning, testing, trouble shooting, repairing, modification &alteration in EI system, including supply of hard copies of course module, etc. at site and OEM's manufacturing/production premises.
60
1275
76500
... More
Earthing of EI equipment, relay rack and power equipment etc to be done along with the supply of all requisite materials, earthing shall be in the form of Ring Earth conforming to RDSO spec RDSO/SPN/197/2008 (with a minimum 6maintenance 5 free earth electrodes) using copper rings with earth resistance less than 1 ohm. The earthing shall be maintenance free. The ring earth shall be connected to copper flat of size 25x3 mm in the relay room and IPS room. The copper flat fixed on the wall to the entire breadth as per STS/E/TAN/3006 or latest of Relay room and IPS room as an earth bus bar and all earth connections shall be taken from it. A, B,C & D class protection shall be provided for all EI equipment.
4
145808
583232
... More
Supply and laying of ESD safe flooring at EI room. Homogeneous anti static composition with black conductive layer 6 sandwiched between two anti static layers. Thickness: 2mm plus, Self fire extinguishing, Less than 0.1% Water absorption At room temperature for 24 hours. Electric Properties: 1. Surface Resistivity : 10 to the power of 6 to 10 to the power of 9 ohms/sq. 2. Decay
100
968
96800
... More
Supply of MSDAC complete system with all accessories consisting of complete indoor and outdoor equipment including 1 remote diagnostic and monitoring system (as per annexure-B) as per RDSO Specification no. RDSO/SPN/176/2013 Ver. 3 or latest amendment/ revision of required Track Sections as per the tentative roll diagram of the Auto section. Number denotes Per DP for this item. Inspection by RDSO. Make: Any RDSO approved firm.
380
338628
128678868
... More
Design, Transportation, Installation, testing and commissioning of MSDAC complete system with all accessories 2 consisting of complete indoor and outdoor equipment including remote diagnostic and monitoring system as per RDSO Specification no. RDSO/SPN/176/2013 Ver. 3 with the latest amendment/revision of required Track Sections as per the tentative roll diagram of the Auto section. Number denotes Per DP for this item.
380
2116
804384
... More
Supply of Mini Integrated Power supply (Mini IPS) as per SECR Typical (Drawing enclosed) for working of auto signaling 4 in the RE area as per RDSO specification No. RDSO/SPN/165/2023 Ver. 4.0 or latest with supply of low maintenance secondary cell (110V,120AH)x2 sets as per Specs. No. IRS-S-88/2004 or latest amendment with electrolyte, surge protection Device (in separate wall mountable SPD Box) along with spares, toolkit etc as per RDSO specification. Inspection by RDSO. Make: Any RDSO approved firm.
3
818456
2455368
... More
Green aspect main LED signal lighting unit, 110V AC retrofittable in existing CLS housing compatible with AC LED ECR as per RDSO specification No. RDSO/SP/199/2010(Rev.1.1) with latest amendment. Inspection by RDSO. Material should be supplied only by RDSO approved firm.
120
9735
1168200
... More
Red aspect main LED signal lighting unit, 110V AC retrofittable in existing CLS housing compatible with AC LED ECR as per RDSO specification No. RDSO/SP/199/2010(Rev.1.1) with latest amendment. Inspection by RDSO. Material should be supplied only by RDSO approved firm.
110
8555
941050
... More
Yellow aspect main LED signal lighting unit, 110V AC retrofittable in existing CLS housing compatible with AC LED ECR as per RDSO specification No. RDSO/SP/199/2010(Rev.1.1) with latest amendment. Inspection by RDSO. Material should be supplied only by RDSO approved firm.
320
8555
2737600
... More
Transportation, Installation, configuration, testing and commissioning of mini IPS with different modules and charging of batteries & its installation. The work shall be executed as per site engineer. 9
3
42900
128700
... More
Supply of IPS expansion cabinet with 12 nos. of DC/DC converters to suit the existing IPS. Inspection by RDSO.
3
306800
920400
... More
Alteration Modification, cable termination, wiring, testing & commissioning of existing Integrated power supply panel as per approved power supply diagram and specification. The contactor has to supply arrangements at central relay room, goomties on original tracing paper of size 60cm.x42cm.
8
7227
57816
... More
Supply of AG MARKER LED Signal Lighting Unit 110V, AC retrofittable in existing CLS HOUSING. Inspection by Rep. of Railway Engineer. Material should be supplied only by RDSO approved firm.
30
8500
255000
... More
Supply of LED Based Signal Unit for 'A' MARKER suitable to fit in existing CLS HOUSING. Inspection by Rep. of Railway Engineer. Material should be supplied only by RDSO approved firm.
110
8100
891000
... More
LED Route Signal lighting Unit 110 V AC, Retrofittable in existing CLS Housing and compatible with AC led ECR/AC conventional ECR as per RDSO Specification No. RDSO SPN/153/2011 (Rev.4.1) or latest. Inspection by RDSO.
100
5679
567900
... More
LED Calling ON Signal lighting unit 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR/AC conventional ECR as RDSO Specn. No. RDSO/SPN/153/ 2011 (Rev.4.1) or latest. Inspection by RDSO.
10
6884
68840
... More
LED Shunt Signal lighting 110 V AC Retrofittable in existing CLS Housing and compatible with AC Led ECR/AC Conventional ECR as per RDSO Specification No. RDSO/SPN/153/2011 (REV.4.1) or latest. Inspection by RDSO.
10
5682
56820
... More
Supply, Transportation, Installation and Commissioning of 24 Port 10/100/1000 Base T with 2 Nos of 10G SFP+ port (with SFP modules) L2 Managed switch as per RDSO Specification RDSO/SPN/TC/83/2020 Rev 2.0 or latest. Make- CISCO/HP/Aruba/juniper. Inspection by rep. of Railway Engineer.
1
33297
33297
... More
Maintenance Console complete with all hardware and accessories. Inspection by: Representative of Railway Engineer. 2 Note: This system should have following features: AIO, 13th Generation i5,Intel UHD Graphics, Windows 11, 23.8" FHD anti-glare display, 8 GB DDR4, 500GB SSD, Dual speakers, 1080p FHD camera with microphone, Wireless Keyboard and mouse, 10/100/1000 GbE LAN, Wi-Fi-6 and Bluetooth 5, Microsoft Office Home and Student, 4 USB-A; 1 RJ-45, 1 headphone/microphone combo, 1 HDMI ports. Make: dell/HP/Lenovo/Acer
2
69387
138774
... More
Concealed wiring of cat-6 cable/telephone cable/ OFC cable etc in the PVC pipe/PVC channel by making groove in the wall, fixing the PVC pipe with clamps, nails and plastering and distempering to make it as it was earlier as per instructions of 3 engineer-in-charge. This includes laying and fixing of all the PVC pipes as per colour in systematic way as per instruction of Rly. Engg. at site. required for laying of all types of cables for railnet, telephone connection etc., All the sundry items for the work has to be supplied by the contractor. Railways will supply telephone cables/Cat-6 cables and PVC pipe/channels. All the telecom cables will be drawn from the specified location, approved drawing. The payment would be made as per layout of grove made in the wall, irrespective of how many pipe (maximum three pipes) are laid and how many cables drawn through these pipes.
200
64
12800
... More
Supply & Fixing of I/O Box (Gang Box contains 2 nos RJ-45 port and 2 Nos RJ-11 port) for LAN cable termination port 4 type RJ-45 (female) attached with colour coding sticker indicating A type & B Type It should also suitable for telephone connection with RJ-11 port. Make: D-Link, PAC, Vinay or similar, AMP or equivalent. Inspection by Rep. of Railway Engineer. Remarks: before supply the material, consent from consignee will be obtained.
10
293
2930
... More
Supply of Dual band (2.4GHz & 5GHz), WiFi 6 router, 802.11ax, 10/100/1000 Mbps RJ45 LAN/WAN ports, 4 or more
2
3402
6804
... More
Green aspect main LED signal lighting unit, 110V AC retrofittable in existing CLS housing compatible with AC LED ECR as per RDSO specification No. RDSO/SP/199/2010(Rev.1.1) with latest amendment. Inspection by RDSO. Material should be supplied only by RDSO approved firm.
4
9735
38940
... More
Red aspect main LED signal lighting unit, 110V AC retrofittable in existing CLS housing compatible with AC LED ECR as per RDSO specification No. RDSO/SP/199/2010(Rev.1.1) with latest amendment. Inspection by RDSO. Material should be supplied only by RDSO approved firm.
4
8555
34220
... More
Yellow aspect main LED signal lighting unit, 110V AC retrofittable in existing CLS housing compatible with AC LED ECR as per RDSO specification No. RDSO/SP/199/2010(Rev.1.1) with latest amendment. Inspection by RDSO. Material should be supplied only by RDSO approved firm.
8
8555
68440
... More
LED Route Signal lighting Unit 110 V AC, Retrofittable in existing CLS Housing and compatible with AC led ECR/AC conventional ECR as per RDSO Specification No. RDSO SPN/153/2011 (Rev.4.1) or latest. Inspection by RDSO.
5
5679
28395
... More
Universal relay, plug in type, style AC/LED all aspects AC lamp proving relay unit with in built current transformer type, 5 slow release neutral line relay 4F/4B contacts, front and back contacts metal to carbon, shall be suitable for working in series with the 110AC LED signal lamp rated at 15W conforming to RDSO specn. no. BRS:941A , STS/E/RELAYS/AC LIT/LED Signal/09-2002, Amdt-1 with latest. Inspection by RDSO.[SOR-2021 for S&T works-Sch 'B3' item no. 1(m)]
17
5015
85255
... More
Route Indicator junction direction 5 lamp type with Arms and drum complete but without lens and lamps, 3 way RH/LH.Drg.No.SA23403(Adv) for 3 way.Spec.No.IRS:S-66/84 with latest amd, IRS:S- 23/88, IRS:S10/78, IRS:S-26-64.Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 5]
1
16567
16567
... More
Fixing, cable drawing and termination, wiring, painting, lettering, testing and commissioning of Junction type Route indicator complete along with lamp/LED unit.[SOR-2021 for S&T works- Sch 'A' item no.10(i)] 1/2 Way
1
2110
2110
... More
Supply of 4 Aspect Drawing No:SA- 23001 A/M . Alt. 8. Signal Colour light Multi unit long range working on 110 V, AC 8 50 C/s.complete but without lamp, transformer and lenses and suitable for 140 mm dia. Post with expanded metal netting. Drg. No. SA//23023 A/M to CM (Adv.) Alt- 7 for metal netting. Spec. IRS:S-10/78, IRS:S-26/64, IRS:S 23/88. Inspection by RITES.[SOR-2021 for S&T works- Sch 'B' item no. 1(a(iii))]
4
18820
75280
... More
Tubular post for CLS 5.5 Mtr. Spec.IRS.S-6/81.Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 6(a)]
4
2857
11428
... More
Signal base 140mm.dia(type tube) Drg.No.S-2011/M.Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works- Sch 'B' item no. 6(b)]
4
7134
28536
... More
Ladder 5.5Mtr for CLS Drg.No.SA-23156(Adv)Alt-1.Spec.No.IRS-S-10. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 7]
4
4082
16328
... More
Installation of signal posts for Multiple Aspect Colour Light Signals complete with signal units,bases, LED unit, fixing and wiring of current transformers of LED units, ladders & other fittings, excavation of pit, casting of cement concrete foundations with necessary water outlets, erection and fixing of complete fittings of the signal/signal post with necessary earthed screen protection arrangement, including drawing of cable through signal posts, termination of cables, wiring, testing and commissioning, two coat painting and lettering, supply and fixing of speed boards if required for the following:- NOTE:- The foundation for Multiple Aspect Colour Light Signal Post drg. No. Con/SK/T/12 and and the foundation bolts shall be of sizes 24 mm x 915 mm to Drg. No. SA- 116A/M and bolts for each foundation for above shall be of size 20 mm x 305 mm to Drg. No. SA- 110A/M ( 4 nos. for each) with two nuts and two washers each per bolt.3 ASPECT/4 ASPECT Note: Payment can be released in a part for the above said works after completion of- (i) Foundation-30%, (ii) Erection - 15%,(iii) Wiring, testing, painting, sand filling, plastering, earthing & writings etc - 45%, (iv) Commissioning - 10% of the rate.[SOR-2021 for S&T works-Sch 'A' item no. 9(a)(ii)]
-
-
12
... More
Supply of retro reflective signal/shunt signal enameled number legend board of size- 300mm X 200mm X 3mm (minimum) made up of aluminum composite - 4 panel (ACP) with white back ground and alphabets/numbers in black along with fixing clamps..[SOR-2021 for S&T works-Sch 'A' item no. 12(b)]
4
308
1232
... More
Installation of retro reflective signal/shunt signal enameled number legend board.[SOR-2021 for S&T works-Sch 'A' item no.12(c)] 15
4
77
308
... More
Supply of Signal Unit Housing for 'A'/AG marker. Inspection by Rep. of Railway Engineer.
2
1842
3684
... More
Supply of LED Based Signal Unit for 'A' MARKER suitable to fit in existing CLS HOUSING. Inspection by Rep. of Railway Engineer. Material should be supplied only by RDSO approved firm.
2
8100
16200
... More
Transportation and fixing of illuminated A/AG Marker/calling-on signals/dependent shunt signals with enameled markers including drawing of cable through the signal post, termination of cables, wiring, fixing of calling- on/shunt signal legend board, lamp/LED unit, two coat painting and lettering, testing and commissioning as required. NOTE: i) The foundation for position light shunt signal post as mentioned in item above shall be in accordance with Drg. No. Con/SK/T/13. ii) 4 Nos. of foundation bolts for each foundation for above shall be of size 20 mm x 305 mm to Drg. No. SA-110A/M with one nut and one washer each per bolt & shall 18 be supplied by the contractor. iii) All the materials required for installation, wiring, testing & commissioning of calling on signals, dependent/independent shunt signals, other than, will have to be supplied by the contractor. These sundry materials such as cement, sand, stone chips 1", bricks, nuts and bolts, washers and screws, eyelets of sizes, PVC bunching tape and button, soldering materials, screen with MS frame, calling on legend board as per Drg. supplied by the Railways, paints, M.S clamps with SS nuts and bolts for fixing of cable etc., and other such sundry materials required for the work shall be supplied by the contractor. The contractor has to supply the lamp replacement register with details filled therein format supplied by the railways in printed well bound register. iv)Contractor has to fix markers/legend boards on signal posts as per the instruction of Railway site engineer.
2
2376
4752
... More
Relay, Non-AC Immune, plug-in type, Style "QN1', Neutral line, 24V DC 8F/8B contacts, front and back contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:930, IRS:S 34 & IRS:S 23. The interlocking code for this unit shall be ABCDF. Inspection by RDSO.[SOR-2021 for S&T works-Sch 'B3' item no. 1(b)]
70
3821
267470
... More
Timer Relay Fail safe type of electronic time delay device - 24 Volt DC (Anuvidyuat make or similar) for Rly. Signalling as per Spec. No. IRS:S-61 with latest amendment. The interlocking code pin for this unit shall be AFHKY. (with a time setting of 60 seconds). Inspection by RDSO.[SOR-2021 for S&T works-Sch 'B3' item no. 1(t)]
4
2544
10176
... More
Relay Flasher, (Anuvidyuat make or Similar) Electronic solid state input 24V. DC at 40/60 flashes per minute. Specification No.RDSO/SPN/173/2002. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works- Sch-B3-1(q)]
2
2212
4424
... More
Composite Relay Rack as per drg.No.SK/DRG/OL/SER/192- SH1/2.The relay racks must be powder coated of stone grey colour. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works-Sch 'B' item no. 18]
2
10395
20790
... More
Q-series/Composite Relay Racks and cable termination racks (New).NOTE: Payment can be released in a part for the above said work after completion of- (i) Erection- 15%,(ii) Wiring, testing, painting, earthing & writings etc - 75% ,(iii)Commissioning of Relay rack/Composite rack/CTR- 10% of Schedule rate.[SOR-2021 for S&T works-Sch 'A1' item no. 1(a)] 24
2
48363
96726
... More
Earth Electrodes to Drg. No: Con/SK/8/3/84. Inspection by RITES.[SOR-2021 for S&T works-Sch 'B' item no. 25]
8
1213
9704
... More
Excavation of earth pit, transportation, placing and fixing of earth electrode with construction of cement enclosure to Drg.No.CON/SK/T/9 and CON/SK/T/9A and drawl of GI wire wrapped on MS strip (35 x 6 mm) from earth electrode to all signalling equipments, including fixing and soldering of lugs at both end of the wire.[SOR-2021 for S&T works-Sch 'A' item no. 8]
8
1941
15528
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendment. Inspection by RDSO. Indoor cable as per IRS-S-76/89 with latest ammendment. 60x0.6 mm dia. [SOR-2021 for S&T works-Sch 'B2' item no. 1(i)(e)]
0.2
-
29493.8
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest amendment.Inspection by RDSO. 16/0.2 mm dia. (80% grey & 20% yellow). [SOR-2021 for S&T works-Sch 'B2' item no. 1(i)(c)]
20
10784
215680
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest amendment. Inspection by Rep. of Railway Engineer. Multi strand ISI copper cable (10 Sq.mm ) (Red-50%, Black-50%).[SOR-2021 for S&T works-Sch 'B2' item no. 1(ii)(d)]
0.5
-
58083
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest amendment. Inspection by Rep. of Railway Engineer.1x 4.0 sq mm flexible wire (Red-50%, Black-50%).[SOR-2021 for S&T works-Sch 'B2' item no. 1(ii)(c)]
0.2
-
7936.6
... More
Wago / phoneix terminal blocks (Part no.280-874). 4 conductor disconnect terminal block. Inspection by Rep. of Railway Engineer. It includes :(i) 4 conductor disconnect terminal block for test and measurement, 0.08 mm.sq.- 2.5mm.sq., Center marking with slot test for test plug dia 2mm/0.079 In and dia 2.3mm/0.091 in Carrier rail din 35: front-entry; with knife disconnect large cage clamp connection, grey.(ii) End and intermediate plate, 2.5 Mm/0.394 in wide carrier rail din 35, grey (Wago part no. 249- 117)(iii) Screw end stop for carrier rail(iv) steel carrier rail;35 X 7.5 mm, 1 mm /0.039 in thick; unslotted (Part no. 210-229/PW11- 0000).(v) WSB quick marking system; horizontal; 1 ... 10 (10x); for width 5-17.5 Mm; 10 strips of 10 marker per strip (100) per card; consecutive numbers white (Part no. 209 - 502S).(vi) Adjacent jumper nominal current 24A; Insulated Grey.[SOR-2021 for S&T works- Sch 'B2' item no. 6(a)]
250
76
19000
... More
ARA terminal for Signalling Installation with PBT materials . Inspection by RDSO.6 Way (ARA terminal) Drg No.SA- 23756 Alt3, Specn No. IRS-S-75/2006 (Rev.-2) with latest amd. [SOR-2021 for S&T works-Sch 'B2' item no. 5]
50
361
18050
... More
Non-deteriorating type low voltage electric fuse for Railway signalling, rated voltage 240 V AC/DC fuse with cylindrical cap without indication size :14x 51 mm. Spec. no: IRS-S-78/92 with latest amendment if any. Inspection by RDSO. 1Amp fuse cartridge. [SOR-2021 for S&T works-Sch 'B2' item no. 4(a)(i)]
20
65
1300
... More
Non-deteriorating type low voltage electric fuse for Railway signalling, rated voltage 240 V AC/DC fuse with cylindrical cap without indication size :14x 51 mm. Spec. no: IRS-S-78/92 with latest amendment if any. Inspection by RDSO. 4Amp fuse cartridge. [SOR-2021 for S&T works-Sch 'B2' item no. 4(a)(iii)]
10
81
810
... More
Non-deteriorating type low voltage electric fuse for Railway signalling, rated voltage 240 V AC/DC fuse with cylindrical cap without indication size :14x 51 mm. Spec. no: IRS-S-78/92 with latest amendment if any. Inspection by RDSO. 16Amp fuse cartridge. [SOR-2021 for S&T works-Sch 'B2' item no. 4(a)(v)]
10
79
790
... More
Fuse Block for above fuse cartridge, Spec. no: IRS-S-75/2006(rev-2) with latest amendment if any. Inspection by RDSO. [SOR-2021 for S&T works-Sch 'B2' item no. 4(b)]
20
189
3780
... More
Steel Apparatus Case(Large) as per Drg.No.Con/SK/1/1/86, with E type lock on both side having ward No.32.Inspection by RITES. [SOR-2021 for S&T works-Sch 'B' item no. 14]
5
15782
78910
... More
The excavation of pit, casting of concrete foundation including surrounding earthwork along the foundation, erection, installation and wiring of steel apparatus case, fixing of terminals, fuse blocks, signal transformer, current transformer, filament switching unit, track battery chargers, adjustable/fixed resistances, choke coils, Fuses, Relays, E type locks , termination of cables, cable insertion, wiring to draw 110V AC therefore in the new apparatus case as required, testing, commissioning including subsequent 37 alterations (if required), bunching of cables, earthing of cable, armours etc. Painting of the apparatus case inside and outside after clearing the surface thoroughly and first coating of anti -corrosive paint and subsequent two coatings of Aluminum paint outside and Red Oxide inside and lettering. 18 mm Hylum sheet for location box shelf and 12 mm for cable termination in location box. Steel apparatus case (Large) to Drg. No. CON/SK/T/8 with 4 Nos. of foundation bolts 20mm x 460mm to Drg. No. SA-112 A/M or latest.NOTE: - Payment can be released in a part for the above said work after completion of- (i) Foundation- 30%,(ii) Erection - 15% , (iii) Wiring, testing, painting, sand filling, plastering, earthing & writings etc - 45% ,(iv) Commissioning - 10% of the rate.[SOR-2021 for S&T works- Sch 'A' item no. 4(a)]
5
17067
85335
... More
Supply of Remote terminal unit with 128 digital & 16 analog inputs with modem as per RDSO spec.no - IRS-S- 99/2006 or latest. Inspection by RDSO.[SOR-2021 for S&T works-Sch 'B3' item no. 14(a)]
2
240611
481222
... More
Installation, Wiring, Testing and commissioning of Remote terminal unit with 128 digital & 16 analog inputs with modem as per RDSO spec. no - IRS-S- 99/2006 or latest. [SOR-2021 for S&T works-Sch 'B3' item no. 14(b)]
2
24061
48122
... More
Supply of fault analysis software for RTUs/Datalogger. The work to be executed as per directives of the Rep. of Railway Engineer. Inspection by Rep.of Railway Engineer.[SOR-2021 for S&T works-Sch 'B3' item no. 15]
2
16253
32506
... More
200- Way Tag Block Spec.IRS-S-77/91 with latest amdt & with Drg.No.SA-24751, 52, 53. Inspection by Rep. of Railway Engineer.[SOR-2021 for S&T works- Sch 'B2' item no.13] 42
2
3096
6192
... More
Supply of IPS expansion cabinet with 12 nos. of DC/DC converters to suit the existing IPS. Inspection by RDSO.
2
306800
613600
... More
Alteration Modification, cable termination, wiring, testing & commissioning of existing Integrated power supply panel as per approved power supply diagram and specification. The contactor has to supply arrangements at central relay room, goomties on original tracing paper of size 60cm.x42cm.
2
7227
14454
... More
Supply of MSDAC complete system with all accessories consisting of complete indoor and outdoor equipment including 44 remote diagnostic and monitoring system (as per annexure-B) as per RDSO Specification no. RDSO/SPN/176/2013 Ver. 3 or latest amendment/ revision of required Track Sections as per the tentative roll diagram of the Auto section. Number denotes Per DP for this item. Inspection by RDSO. Make: Any RDSO approved firm.
12
364966
4379592
... More
Design, Transportation, Installation, testing and commissioning of MSDAC complete system with all accessories 45 consisting of complete indoor and outdoor equipment including remote diagnostic and monitoring system as per RDSO Specification no. RDSO/SPN/176/2013 Ver. 3 with the latest amendment/revision of required Track Sections as per the tentative roll diagram of the Auto section. Number denotes Per DP for this item.
12
2352
28224
... More
Control Panel for Mid section interlocked LC Gate/IBS(operation-cum indication console Domino type)/ Siding motor operated point operation pannel /Non Interlocking pannel to RDSO Spec. No. 36/87 size of each domino will be 54+10mm X 34+7mm. 46 25% panel LEDs, all type of dominos and buttons assemblies compleate as spare to be supplied. This includes cable termination MS rack with 3/4" thick wood strips including fabrication thereof as per the requirement of the Rly. terminations of cables, fix of terminal blocks, terminals, painting and lettering as required. Inspection by Rep. of Railway Engineer.Note:-MS angle/flat, teak wood, bolts & nuts, screws, shelves etc. required as above shall be supplied by the contractor.[SOR-2021 for S&T works-Sch 'B3' item no. 11]
2
44258
88516
... More
Installation, wiring as per approved wiring diagram, testing and commissioning of control panel (operation cum indication panel) complete with termination of cable, painting and lettering as required. Cable termination in MS rack with 3⁄4th inch 47 thick sal wood strips including fabrication there of as per requirement of the Railway. Fixing of cable with MS clamps, fixing of terminal block, M.S. wiring ladder with insulated M.S. strips from relay room to panel room, painting and lettering, filling sand under control panel rest table, cable duct, covering the open space around the control panel rest table with bricks lining, masonry work and plastering the same with cement required.[SOR-2021 for S&T works-Sch 'A1' item no. 7]
2
19568
39136
... More
Excavation of trench and clearing of roots of trees, bushes, ballast and reconditioning etc., including bailing out water 48 and disposal of extra soil. All soils including soft rocky area-Depth 1.0 Mtr. & width 0.3 Mtr. Note:This includes guarding of cables, relaying of cables and redoing of cable jointing in case of the thefts or otherwise at contractor's own cost till commissioned. [SOR- 2021 for S&T works- Sch 'A' item no. 1(i)(b)]
0.4
-
30636
... More
Laying of Signalling Cable/Power/Quad cable / PIJF cable in the excavated trench to Drg.No:CON/SK/T/5.Transportation, 49 supply of 'U' clamps and anchoring of cable at every 10 Mtrs with 'U' clamp to Drg.No:CSTE/C/Cable/81 including back filling with excavated earth and ramming of trenches after cable laying. Note: This includes guarding of cables, relaying of cables and redoing of cable jointing in case of the thefts or otherwise at contractor's own cost till commissioned. [SOR-2021 for S&T works-Sch 'A' item no. 2(a)]
4
16740
66960
... More
Small value Engg. items, required if any to be executed at site as per advise of Dy.CSTE/Proj, shall be paid as per prevailing SOR of Engg. deptt. of SECR at the time of execution. [SOR-2021 for S&T works- Sch 'A' item no. 36].
-
-
60377
... More
Design and development of Circuit Diagram/Logic in size B(A3) as per SEM sheet including contact analysis.[SOR-2021 for S&T works-Sch 'A2' item no. 1(e)]
150
1004
150600
... More
Cement Concrete of proportion 1:3:6 with graded aggregate of size 25mm. and below.[SOR-2021 for S&T works-Sch 'A' item no. 7]
5
2943
14715
... More
Wiring ladder of 25x25x3mm. Aluminum angle and 20x3mm.flat, 2 Mtr. Inspection by Rep. of Railway Engineer.[SOR- 2021 for S&T works-Sch 'B' item no. 22]
50
267
13350
... More
Collecting, stacking with deployment of Man power, Hydra etc for Loading/ Unloading and Transportation of Materials 56 (Fresh/Released/ Unused) from (i) work site to GSD/Raipur, (ii) work site to the store of SSE(SIG)/CON,(iii) any store depot to any other store depot over Indian railways as decided by Railway Administration by suitable Trucks and stacking properly.[SOR-2021 for S&T works-Sch 'A' item no. 17]
4000
38
152000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%