Rural Water Supply And Sanitation Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_RWSS_74512_2Bid Award Id
ViewTender No
EE RWSS(PLB)_24/2021-2022Tender Authority
Rural Water Supply And Sanitation Department ViewPurchaser Address
-Website
http://https://rayagada.nic.in/rural-water-supply-sanitation/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
iii) Procurement of GI/GI column pipe of required dia (3mtr length) including fitting and fixture. a.40 mm dia
10
-
504.49
b. 40mm dia flanges
10
-
207.14
c. 40mm flange joint
9
-
136.26
d. 4 mm² PVC insulated wire rope with clamp
10
-
35
Installation of pumping set into Open well/Tubewell including fitting fixing of electrical accessories such as main switch, control pannel unit including jointing, lowering of column pipe & cable and incluiding bore clamp, bore cap etc as required complete.
1
-
4443
Storage reservoir - Designing, Testing and commissioning of R.C.C clear water ESR of 20KL OGR with suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc. including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the OGR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
353550
Treatment unit - Providing chlorination arrangement of required capacity with agitator, Dosing Pump as per approved design including cost and installation of all materials, pipes, fittings, valves etc all complete.
1
-
40000
Rising main and Distribution system - Providing and laying fabricated G.I pipes of TATA/Jindal make and specials as dimentionally mentioned in proper position / alignment as directed by the concern Engineer in charge including conveyance from stores to site of work, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main / distribution system, welding on automatic welding machine including cost of all materials, labour, T&P , consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. a.80 mm dia G.I. Pipe (Medium class)
725
-
1086.14
Providing and laying fabricated G.I specials as dimentionally mentioned made out of 8mm thick G.I plate, gas cutting to required size, rolling, tack welding, assembling to required size, welding on automatic welding machine including cost of materials as required including hire and depriciation charges of machinaries & T&P materials such as generators, welding machine etc. all complete with provision of anticorrosive paint as directed by the concerned Engineer in-charge including conveyance of the same to the work site, unloading and stacking in proper position. a.80mm dia x 8mm thick G.I Flange
8
-
401.79
B.Cutting
8
-
357.21
C.Welding
8
-
298.11
80mm dia, flange joint
4
-
136.26
Earth in excavation intrenches for laying of pipe lines in all kinds of soil including dressing and levelling the bed of foundation, braeking clods and depositing the excavated soil with initial lead of 50m and initial lift of 1.5m as per direction of engineer in charge
1244.1
-
204.22
Refilling the pipe line trenches with the excavated earth including watering and raming as directed by the Engineer -in -charge.
1223.8
-
113.45
Supplying all labour, T&P for cutting CC road for laying of PVC pipe
27
-
585.4
Supplying all labour, T&P for C.C.(1:2:4) with 12mm size hard granite chips and mending good the damages of C.C. Road for laying of PVC Pipe line with all complete
27
-
5750.44
Cutting metal road for taking pipe line and making good to the damages
100
-
311.94
Laying in trenches HDPE pipes confirming toIS 4984-1995 and specials of following out following outside diameter and Class-1 to Class-3 and jointing by Fusion welding methed inluding testing as per specification complete. a.90mm dia High Density Polyethylene Pipe PN 8.0
3190
-
549.52
Providing and fixing cast iron sluice valve with double flanged ends for water works purposes for the following rating (ISI 14846-2000) and subsequent ammendment if any) and nominal dia meter ( including the cost of all materials) and as per specification complete.a.80 mm Dia
5
-
4928.15
Providing and fixing swing check type reflux valves (Non returns valve) with double flanged ends for water works purposes for the following rating (1.6MPA confirming to IS 5312-1984 and sebsequent ammendment if any ) and nominal diameter ( including the cost of all materials) as per specification complete.a.80 mm Dia
2
-
4408.96
Providing and fixing 15mm to 25mm dia single Air valve for water works purposes for the following dia meter including drilling the water main (including all cost of materials) as per specification complete. a.15mm dia
2
-
1892.85
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate non-return valves and sluice valves as per PH specification complete.
7
-
13239
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate Air valves as per PH specification complete.
2
-
10637
INDIVIDUAL HOUSE HOLD WATER SUPPLY CONNECTION BY TAP Supplying all materials labour T&P for fitting and fixing of metal or PVC febricated shadle with suitable o ring, nuts and bolts etc with 1/8'' inch dia GM ferrule cock ,required 15mm to 20mm dia GI fittings,20mm dia GI pipe of 1.00 mtr length , making concrete block with 110mm OD PVC pipe of required length for stand point ,cutting hole through brick/ stone masonary wall with necessary earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
62
-
1892
Supplying all materials labour T&P for laying of 20mm dia HDPE pipe (PE-80,PN -10) incluiding earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
310
-
71.4
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages
62
-
92
Construction of Display Board (1.5M. X 1.5M.)
1
-
4549
Pump Chamber of size 3mtr X 3mtr inside dimension - Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
12.42
-
204.22
Sand filling in foundation and plinth well watered and rammed including cost carriage and royalty(Sand filling at headworks site 187.50+ Pump Chamber site 5.35)
192.85
-
382.56
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
2.6
-
4056.65
Random rubble HG stone maonry in cement mortar (1:6) in foundation and plinth
7.9
-
3472.09
a.Fly Ash Brick masonry in CM (1:6) in foundation plinth including cost carriage royalty of all materials
0.82
-
4330.31
b. Fly Ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials
8.46
-
4363.64
Earth filling with excavated materials including watering and ramming etc all complete
3.36
-
113.45
Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete. a)R.C.C. Foundation, Plinth Bend
3.9
-
101.71
b) RCC Lintel
2.43
-
264.1
c)RCC Roof and chajja
15.77
-
429.25
RCC M20 with 12 mm size HG chips including hoisting lowering and laying the concrete including cost carriage royalty of all materials
2.61
-
5368.24
2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials
14.44
-
308.7
Cutting bending binding and tying the MS grills and placing in position including cost and carriage of MS rod and cost of binding wire including carriage of all materials
2.35
-
8450.76
12mm thick cement plaster (1:4) over brick masonry work including cement punning and bituminus painting over top of wall including cost carriage and royality of all materials
3.25
-
207.5
12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials
93.18
-
145.11
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete.
11.95
-
300.21
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips including cost carriage royalty of all materials etc all complete
4.05
-
318.9
Supplying all materials labour T&P and providing Weather coat to new plastered surface including transportation charges taxes etc all complete
93.18
-
136.65
Supplying all materials labour T&P and finishing walls with Plastic emulsion paint of approved shade with two coats to give an even shade including cost of paint and carriage charges etc all complete.
93.18
-
88.17
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )
90
-
75
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 4.50 kg / sqft )
73.5
-
70
Supplying all materials labour T&P and providing 5 cm thick RCC Shelf in cc(1:2:4) with CB HG Chips 12 mm size fitted and fixed in position finished smooth complete with all materials etc all complete
73.5
-
75
Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete
9.68
-
137.93
Fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials.
11.95
-
965.1
Fixing tiles in dados, skirting and risers of steps on 12mm cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.
5.5
-
1069.46
Providing & Fixing CHEQURED TILES in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.
15.21
-
499.59
Internal Electrification - Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge.
10
-
170
Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge.
2
-
165
Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required
7
-
32
Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. 32 Amp D.P.main switch with porcelain base
1
-
951
Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.63 Amp TPN Main switch
1
-
3506
Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
1555
Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
85
Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required.(a) 250mmx200mmx75mm
1
-
160
(b) 180mmx100mmx60mm
1
-
84
Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required a. 4x10 sqmm + 2x6 sqmm
5
-
460
b.3x10 sqmm + 1x6 sqmm
5
-
335
c.2x4 sqmm + 1x2.5 sqmm
2
-
125
d.2x2.5 sqmm + 1x1.5 sqmm
5
-
95
e.3x1.5 sqmm + 1x1.5 sqmm
2.5
-
90
Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction fo the Engineer in charge.a.Short point
2
-
330
b.Medium point
1
-
430
c.Long point
1
-
550
Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge.
2
-
435
Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. A.5 / 6 Amp one way switch (Piano type)
5
-
21
B.3 Pin 5/6 socket outlet (piano tytpe)
1
-
34
Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required.
15
-
58
Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required
0.3
-
530
Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc with charcoal and salt as required.
1
-
1875
Operation & maintainance for 5 years @ 1% per year
5
-
42069.43
PWS Scheme to village Sikanbadi - PROCUREMENT OF SUBMERSIBLE PUMP INCLUIDING COST OF LOWERING.Supplying of Vertical / Open well submersible pump set in multistage construction with radial or mixed flow impellers coupeled with totaly enclosed water filled squirrel cage induction motor to operate at 2850rpm rated voltage 380-415 volt 50 Hz AC SINGLE /3phase power supply capable of discharging as noted below of any reputed make like KSB/CROMPTON/CRI/Kirloskar confirming to relevant IS specification IS 14220 for installing in RCC intake well /Percolation well.Vertical submersible pump 3 HP of 2 Nos.
2
-
16551.07
ACCESSORIES Supplying of 3 phase star delta controll pannel suitable for above submersible pump fitted with voltameter ,Ampermeter, selector, switch, main switch, fuse indicator ,connector,on/of switch with strater component with over load protection and single phasepreventor enclosed in a sheet steel encloser of any reputed make ( like BCH /switch and gear /L&T /Havells)
1
-
4000
ii) Procurement of submersible 4 sqmm flat cable of reputed make.
45
-
95.52
iii) Procurement of GI/GI column pipe of required dia (3mtr length) including fitting and fixture. a.40 mm dia
5
-
504.49
b. 40mm dia flanges
5
-
207.14
c. 40mm flange joint
4
-
136.26
d. 4 mm² PVC insulated wire rope with clamp
5
-
35
Installation of pumping set into Open well/Tubewell including fitting fixing of electrical accessories such as main switch, control pannel unit including jointing, lowering of column pipe & cable and incluiding bore clamp, bore cap etc as required complete.
1
-
4443
Storage reservoir - Designing, Testing and commissioning of R.C.C 20KL ESR with 10m staging suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc. including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the ESR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
1231682
Treatment unit - Providing chlorination arrangement of required capacity with agitator, Dosing Pump as per approved design including cost and installation of all materials, pipes, fittings, valves etc all complete.
1
-
40000
Rising main and Distribution system - Providing and laying fabricated G.I pipes of TATA/Jindal make and specials as dimentionally mentioned in proper position / alignment as directed by the concern Engineer in charge including conveyance from stores to site of work, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main / distribution system, welding on automatic welding machine including cost of all materials, labour, T&P , consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. a.80 mm dia G.I. Pipe (Medium class)
10
-
1086.14
Earth in excavation intrenches for laying of pipe lines in all kinds of soil including dressing and levelling the bed of foundation, braeking clods and depositing the excavated soil with initial lead of 50m and initial lift of 1.5m as per direction of engineer in charge
1452.6
-
204.22
Refilling the pipe line trenches with the excavated earth including watering and raming as directed by the Engineer -in -charge.
1426.45
-
113.45
Supplying all labour, T&P for cutting CC road for laying of PVC pipe
33.75
-
585.4
Supplying all labour, T&P for C.C.(1:2:4) with 12mm size hard granite chips and mending good the damages of C.C. Road for laying of PVC Pipe line with all complete
33.75
-
5750.44
Cutting metal road for taking pipe line and making good to the damages
150
-
311.94
Laying in trenches HDPE pipes confirming toIS 4984-1995 and specials of following out following outside diameter and Class-1 to Class-3 and jointing by Fusion welding methed inluding testing as per specification complete. a.90mm dia High Density Polyethylene Pipe PN 8.0
2810
-
549.52
b.110mm dia High Density Polyethylene Pipe PN 8.0
870
-
755.72
Providing and fixing cast iron sluice valve with double flanged ends for water works purposes for the following rating (ISI 14846-2000) and subsequent ammendment if any) and nominal dia meter ( including the cost of all materials) and as per specification complete.a.80 mm Dia
4
-
4928.15
b.100 mm Dia
2
-
6975.8
Providing and fixing swing check type reflux valves (Non returns valve) with double flanged ends for water works purposes for the following rating (1.6MPA confirming to IS 5312-1984 and sebsequent ammendment if any ) and nominal diameter ( including the cost of all materials) as per specification complete.a.80 mm Dia
1
-
4408.96
b.100 mm Dia
1
-
6162.75
Providing and fixing 15mm to 25mm dia single Air valve for water works purposes for the following dia meter including drilling the water main (including all cost of materials) as per specification complete. a.15mm dia
2
-
1892.85
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate non-return valves and sluice valves as per PH specification complete.
8
-
13239
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate Air valves as per PH specification complete.
1
-
10637
INDIVIDUAL HOUSE HOLD WATER SUPPLY CONNECTION BY TAP Supplying all materials labour T&P for fitting and fixing of metal or PVC febricated shadle with suitable o ring, nuts and bolts etc with 1/8'' inch dia GM ferrule cock ,required 15mm to 20mm dia GI fittings,20mm dia GI pipe of 1.00 mtr length , making concrete block with 110mm OD PVC pipe of required length for stand point ,cutting hole through brick/ stone masonary wall with necessary earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
106
-
1892
Supplying all materials labour T&P for laying of 20mm dia HDPE pipe (PE-80,PN -10) incluiding earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
530
-
71.4
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages
106
-
92
Construction of Display Board (1.5M. X 1.5M.)
1
-
4549
Pump Chamber of size 3mtr X 3mtr inside dimension - Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
12.42
-
204.22
Sand filling in foundation and plinth well watered and rammed including cost carriage and royalty(Sand filling at headworks site 120+ Pump Chamber site 5.35)
125.35
-
382.56
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
2.6
-
4056.65
Random rubble HG stone maonry in cement mortar (1:6) in foundation and plinth
7.9
-
3472.09
a.Fly Ash Brick masonry in CM (1:6) in foundation plinth including cost carriage royalty of all materials
0.82
-
4330.31
b. Fly Ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials
8.46
-
4363.64
Earth filling with excavated materials including watering and ramming etc all complete
3.36
-
113.45
Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete. a)R.C.C. Foundation, Plinth Bend
3.9
-
101.71
b) RCC Lintel
2.43
-
264.1
c)RCC Roof and chajja
15.77
-
429.25
RCC M20 with 12 mm size HG chips including hoisting lowering and laying the concrete including cost carriage royalty of all materials
2.61
-
5368.24
2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials
14.44
-
308.7
Cutting bending binding and tying the MS grills and placing in position including cost and carriage of MS rod and cost of binding wire including carriage of all materials
2.35
-
8450.76
12mm thick cement plaster (1:4) over brick masonry work including cement punning and bituminus painting over top of wall including cost carriage and royality of all materials
3.25
-
207.5
12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials
93.18
-
145.11
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete.
11.95
-
300.21
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips including cost carriage royalty of all materials etc all complete
4.05
-
318.9
Supplying all materials labour T&P and providing Weather coat to new plastered surface including transportation charges taxes etc all complete
93.18
-
136.65
Supplying all materials labour T&P and finishing walls with Plastic emulsion paint of approved shade with two coats to give an even shade including cost of paint and carriage charges etc all complete.
93.18
-
88.17
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )
90
-
75
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 4.50 kg / sqft )
73.5
-
70
Supplying all materials labour T&P and providing 5 cm thick RCC Shelf in cc(1:2:4) with CB HG Chips 12 mm size fitted and fixed in position finished smooth complete with all materials etc all complete
73.5
-
75
Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete
9.68
-
137.93
Fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials.
11.95
-
965.1
Fixing tiles in dados, skirting and risers of steps on 12mm cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.
5.5
-
1069.46
Providing & Fixing CHEQURED TILES in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.
15.21
-
499.59
Internal Electrification - Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge.
10
-
170
Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge.
2
-
165
Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required
7
-
32
Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. 32 Amp D.P.main switch with porcelain base
1
-
951
Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.63 Amp TPN Main switch
1
-
3506
Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
1555
Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
85
Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required.(a) 250mmx200mmx75mm
1
-
160
(b) 180mmx100mmx60mm
1
-
84
Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required a. 4x10 sqmm + 2x6 sqmm
5
-
460
b.3x10 sqmm + 1x6 sqmm
5
-
335
c.2x4 sqmm + 1x2.5 sqmm
2
-
125
d.2x2.5 sqmm + 1x1.5 sqmm
5
-
95
e.3x1.5 sqmm + 1x1.5 sqmm
2.5
-
90
Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction fo the Engineer in charge.a.Short point
2
-
330
b.Medium point
1
-
430
c.Long point
1
-
550
Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge.
2
-
435
Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. A.5 / 6 Amp one way switch (Piano type)
5
-
21
B.3 Pin 5/6 socket outlet (piano tytpe)
1
-
34
Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required.
15
-
58
Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required
0.3
-
530
Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc with charcoal and salt as required.
1
-
1875
Boundary Wall for 60 mtr - Earth work in hard soil and gravelley soil within 50m, initial lead and 1.5, initial lift including rough dressing and breaking clods to maximum 5 cm to7 cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge.
33.75
-
188.79
Filling in plinth with selected sand in the areas within initial lead & lift, including cost of materials, labours, T&P etc. complete.
6.75
-
382.56
Providing & laying cement concrete of proportion ( 1:4:8 )of 40mm downgraded stone aggregate of specified thickness for foundations below walls, column footings at any depth below floors etc. including centering, shuttering if required laying spreading, ramming, and curing etc.complete including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer-in-charge.
6.75
-
4056.65
Providing and constructing Random rubble H.G. stone masonry at foundation in cement mortar 1:6 including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer-in-charge.
24.3
-
3472.09
2.5cm Dam proof course (DPC) with CC (1:2:4) using 12mm size CBHG chips including cost, conveyance, royality, of all materials etc. complete as per direction of Engineer-in-charge.
27
-
297.57
Providing and constructing Brick masonry at all floors and locations using best approved quality flyash bricks from local available using in cement mortar 1:6 to correct line, level & plumb, including, scaffolding, watering, curing, recking out joints etc. including cost of all materials, labour, transportation etc. complete as per direction of engineer-in-charge.
20.17
-
4330.31
Providing and applying cement plaster 16mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P , curing etc. complete as direction of Engineer-in-charge.
100.87
-
205.52
Providing and applying cement plaster 12mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P , curing etc. complete as direction of Engineer-in-charge.
100.87
-
145.11
Finishing wall with weather coat two coats of approved shade on new plastered surface to give an even shade including cost, conveyance, royalities of materials, labour, T&P, required for the work etc. all complete
201.73
-
136.65
Filling in foundation & plinth with excavated materials including watering and ramming as directed by the engineer-in-charge.
4.05
-
113.45
Providing and fixing ms fabricated gate to the boundary
45
-
70
Painting two coats with enamel paint over one coat of primer
0.9
-
193.01
Walkway and cover slab - Supply all materials, labour, T&P, Welding rods, gas etc. for fabricating and welding of different sizes of MS angles, joist channel, MS/G.I pipe, flat and sheets of 4mm thick as per the required site condition for covering the 5mtr dia RCC/ Masonary well with MS/G.I ralling, necessary precaution to prevent entry of foreign materials like leaves, earth and dust into the well, filling cavities & gaps with CC(1:2:4), finished smooth including painting two coats with approved enamel paint over a coat of redoxide primer to sheet, channel and ralling complete including GST & cess , as per the direction of Engineer-in-charge. a.MS Channel 100x50x50x6 mm
257.6
-
67
b. MS Angel 50x50x6
266
-
70
C. MS Angel 25x25x6
40.5
-
70
d. Flat 6mm thick
25.14
-
70
e.2.5mm thick plate covering
491.79
-
75
Providing and Laying fabricated G.I pipes and specials as dimentionaly mentioned in proper position / alignment as directed by the concern Engineer in charge including cost, conveyance, loading, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main/distrubution system, welding on automatic welding machine including cost of all materials, labour, T&P consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. A. Stand
11
-
1086.14
b. Railing with 40mm G.I pipe
51
-
504.49
Painting two coats with any approved enamel paints over a coat of redoxide primer including cost of all materials and labour charges etc. complete.
23.84
-
193.01
Operation & maintainance for 5 years @ 1% per year
5
-
53514.07
PWS Scheme to village Katasingi - PROCUREMENT OF SUBMERSIBLE PUMP INCLUIDING COST OF LOWERING.Supplying of Vertical / Open well submersible pump set in multistage construction with radial or mixed flow impellers coupeled with totaly enclosed water filled squirrel cage induction motor to operate at 2850rpm rated voltage 380-415 volt 50 Hz AC SINGLE /3phase power supply capable of discharging as noted below of any reputed make like KSB/CROMPTON/CRI/Kirloskar confirming to relevant IS specification IS 14220 for installing in RCC intake well /Percolation well.Vertical submersible pump 3 HP of 2 Nos.
2
-
16551.07
ACCESSORIES Supplying of 3 phase star delta controll pannel suitable for above submersible pump fitted with voltameter ,Ampermeter, selector, switch, main switch, fuse indicator ,connector,on/of switch with strater component with over load protection and single phasepreventor enclosed in a sheet steel encloser of any reputed make ( like BCH /switch and gear /L&T /Havells)
2
-
4000
ii) Procurement of submersible 4 sqmm flat cable of reputed make.
50
-
95.52
iii) Procurement of GI/GI column pipe of required dia (3mtr length) including fitting and fixture. a.40 mm dia
5
-
504.49
b. 40mm dia flanges
5
-
207.14
c. 40mm flange joint
4
-
136.26
d. 4 mm² PVC insulated wire rope with clamp
10
-
35
Installation of pumping set into Open well/Tubewell including fitting fixing of electrical accessories such as main switch, control pannel unit including jointing, lowering of column pipe & cable and incluiding bore clamp, bore cap etc as required complete.
1
-
4443
Storage reservoir - Designing, Testing and commissioning of R.C.C 20KL ESR with 10m staging suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc. including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the ESR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
1231682
Treatment unit - Providing chlorination arrangement of required capacity with agitator, Dosing Pump as per approved design including cost and installation of all materials, pipes, fittings, valves etc all complete.
1
-
40000
Earth in excavation intrenches for laying of pipe lines in all kinds of soil including dressing and levelling the bed of foundation, braeking clods and depositing the excavated soil with initial lead of 50m and initial lift of 1.5m as per direction of engineer in charge
2883.75
-
204.22
Refilling the pipe line trenches with the excavated earth including watering and raming as directed by the Engineer -in -charge.
2849.75
-
113.45
Laying in trenches HDPE pipes confirming toIS 4984-1995 and specials of following out following outside diameter and Class-1 to Class-3 and jointing by Fusion welding methed inluding testing as per specification complete. a.75mm dia High Density Polyethylene Pipe PN 6.0
7690
-
249.52
Providing and fixing cast iron sluice valve with double flanged ends for water works purposes for the following rating (ISI 14846-2000) and subsequent ammendment if any) and nominal dia meter ( including the cost of all materials) and as per specification complete.a.80 mm Dia
7
-
4928.15
Providing and fixing swing check type reflux valves (Non returns valve) with double flanged ends for water works purposes for the following rating (1.6MPA confirming to IS 5312-1984 and sebsequent ammendment if any ) and nominal diameter ( including the cost of all materials) as per specification complete.a.80 mm Dia
2
-
4408.96
Providing and fixing 15mm to 25mm dia single Air valve for water works purposes for the following dia meter including drilling the water main (including all cost of materials) as per specification complete. a.15mm dia
2
-
1892.85
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate non-return valves and sluice valves as per PH specification complete.
9
-
13239
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate Air valves as per PH specification complete.
1
-
10637
INDIVIDUAL HOUSE HOLD WATER SUPPLY CONNECTION BY TAP Supplying all materials labour T&P for fitting and fixing of metal or PVC febricated shadle with suitable o ring, nuts and bolts etc with 1/8'' inch dia GM ferrule cock ,required 15mm to 20mm dia GI fittings,20mm dia GI pipe of 1.00 mtr length , making concrete block with 110mm OD PVC pipe of required length for stand point ,cutting hole through brick/ stone masonary wall with necessary earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
112
-
1892
Supplying all materials labour T&P for laying of 20mm dia HDPE pipe (PE-80,PN -10) incluiding earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
560
-
71.4
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages
112
-
92
Construction of Display Board (1.5M. X 1.5M.)
1
-
4549
Pump Chamber of size 3mtr X 3mtr inside dimension - Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
12.42
-
204.22
Sand filling in foundation and plinth well watered and rammed including cost carriage and royalty(Sand filling at headworks site 187.5+ Pump Chamber site 5.35)
192.85
-
382.56
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
2.6
-
4056.65
Random rubble HG stone maonry in cement mortar (1:6) in foundation and plinth
7.9
-
3472.09
a.Fly Ash Brick masonry in CM (1:6) in foundation plinth including cost carriage royalty of all materials
0.82
-
4330.31
b. Fly Ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials
8.46
-
4363.64
Earth filling with excavated materials including watering and ramming etc all complete
3.36
-
113.45
Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete. a)R.C.C. Foundation, Plinth Bend
3.9
-
101.71
b) RCC Lintel
2.43
-
264.1
c)RCC Roof and chajja
15.77
-
429.25
RCC M20 with 12 mm size HG chips including hoisting lowering and laying the concrete including cost carriage royalty of all materials
2.61
-
5368.24
2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials
14.44
-
308.7
Cutting bending binding and tying the MS grills and placing in position including cost and carriage of MS rod and cost of binding wire including carriage of all materials
2.35
-
8450.76
12mm thick cement plaster (1:4) over brick masonry work including cement punning and bituminus painting over top of wall including cost carriage and royality of all materials
3.25
-
207.5
12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials
93.18
-
145.11
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete.
11.95
-
300.21
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips including cost carriage royalty of all materials etc all complete
4.05
-
318.9
Supplying all materials labour T&P and providing Weather coat to new plastered surface including transportation charges taxes etc all complete
93.18
-
136.65
Supplying all materials labour T&P and finishing walls with Plastic emulsion paint of approved shade with two coats to give an even shade including cost of paint and carriage charges etc all complete.
93.18
-
88.17
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )
90
-
75
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 4.50 kg / sqft )
73.5
-
70
Supplying all materials labour T&P and providing 5 cm thick RCC Shelf in cc(1:2:4) with CB HG Chips 12 mm size fitted and fixed in position finished smooth complete with all materials etc all complete
73.5
-
75
Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete
9.68
-
137.93
Fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials.
11.95
-
965.1
Fixing tiles in dados, skirting and risers of steps on 12mm cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.
5.5
-
1069.46
Providing & Fixing CHEQURED TILES in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.
15.21
-
499.59
Internal Electrification - Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge.
10
-
170
Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge.
2
-
165
Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required
7
-
32
Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. 32 Amp D.P.main switch with porcelain base
1
-
951
Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.63 Amp TPN Main switch
1
-
3506
Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
1555
Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
85
Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required.(a) 250mmx200mmx75mm
1
-
160
(b) 180mmx100mmx60mm
1
-
84
Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required a. 4x10 sqmm + 2x6 sqmm
5
-
460
b.3x10 sqmm + 1x6 sqmm
5
-
335
c.2x4 sqmm + 1x2.5 sqmm
2
-
125
d.2x2.5 sqmm + 1x1.5 sqmm
5
-
95
e.3x1.5 sqmm + 1x1.5 sqmm
2.5
-
90
Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction fo the Engineer in charge.a.Short point
2
-
330
b.Medium point
1
-
430
c.Long point
1
-
550
Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge.
2
-
435
Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. A.5 / 6 Amp one way switch (Piano type)
5
-
21
B.3 Pin 5/6 socket outlet (piano tytpe)
1
-
34
Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required.
15
-
58
Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required
0.3
-
530
Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc with charcoal and salt as required.
1
-
1875
Walkway and cover slab - Supply all materials, labour, T&P, Welding rods, gas etc. for fabricating and welding of different sizes of MS angles, joist channel, MS/G.I pipe, flat and sheets of 4mm thick as per the required site condition for covering the 5mtr dia RCC/ Masonary well with MS/G.I ralling, necessary precaution to prevent entry of foreign materials like leaves, earth and dust into the well, filling cavities & gaps with CC(1:2:4), finished smooth including painting two coats with approved enamel paint over a coat of redoxide primer to sheet, channel and ralling complete including GST & cess , as per the direction of Engineer-in-charge. a.MS Channel 100x50x50x6 mm
257.6
-
67
b. MS Angel 50x50x6
266
-
70
C. MS Angel 25x25x6
40.5
-
70
d. Flat 6mm thick
25.14
-
70
e.2.5mm thick plate covering
491.79
-
75
Providing and Laying fabricated G.I pipes and specials as dimentionaly mentioned in proper position / alignment as directed by the concern Engineer in charge including cost, conveyance, loading, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main/distrubution system, welding on automatic welding machine including cost of all materials, labour, T&P consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. A. Stand
11
-
1086.14
b. Railing with 40mm G.I pipe
51
-
504.49
Painting two coats with any approved enamel paints over a coat of redoxide primer including cost of all materials and labour charges etc. complete.
23.84
-
193.01
Operation & maintainance for 5 years @ 1% per year
5
-
50248.81
PWS Scheme to village Kusipanga - PROCUREMENT OF SUBMERSIBLE PUMP INCLUIDING COST OF LOWERING.Supplying of Vertical / Open well submersible pump set in multistage construction with radial or mixed flow impellers coupeled with totaly enclosed water filled squirrel cage induction motor to operate at 2850rpm rated voltage 380-415 volt 50 Hz AC SINGLE /3phase power supply capable of discharging as noted below of any reputed make like KSB/CROMPTON/CRI/Kirloskar confirming to relevant IS specification IS 14220 for installing in RCC intake well /Percolation well.Vertical submersible pump 3 HP of 2 Nos.
2
-
16551.07
ACCESSORIES Supplying of 3 phase star delta controll pannel suitable for above submersible pump fitted with voltameter ,Ampermeter, selector, switch, main switch, fuse indicator ,connector,on/of switch with strater component with over load protection and single phasepreventor enclosed in a sheet steel encloser of any reputed make ( like BCH /switch and gear /L&T /Havells)
2
-
4000
ii) Procurement of submersible 4 sqmm flat cable of reputed make.
50
-
95.52
iii) Procurement of GI/GI column pipe of required dia (3mtr length) including fitting and fixture. a.40 mm dia
5
-
504.49
b. 40mm dia flanges
5
-
207.14
c. 40mm flange joint
4
-
136.26
d. 4 mm² PVC insulated wire rope with clamp
10
-
35
Installation of pumping set into Open well/Tubewell including fitting fixing of electrical accessories such as main switch, control pannel unit including jointing, lowering of column pipe & cable and incluiding bore clamp, bore cap etc as required complete.
1
-
4443
Storage reservoir - Designing, Testing and commissioning of R.C.C 30KL ESR with 10m staging suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc. including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the ESR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
1326574
Treatment unit - Providing chlorination arrangement of required capacity with agitator, Dosing Pump as per approved design including cost and installation of all materials, pipes, fittings, valves etc all complete.
1
-
40000
Rising main and Distribution system - Providing and laying fabricated G.I pipes of TATA/Jindal make and specials as dimentionally mentioned in proper position / alignment as directed by the concern Engineer in charge including conveyance from stores to site of work, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main / distribution system, welding on automatic welding machine including cost of all materials, labour, T&P , consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. a.65 mm dia G.I. Pipe (Medium class)
20
-
857.1
Earth in excavation intrenches for laying of pipe lines in all kinds of soil including dressing and levelling the bed of foundation, braeking clods and depositing the excavated soil with initial lead of 50m and initial lift of 1.5m as per direction of engineer in charge
1689.6
-
204.22
Refilling the pipe line trenches with the excavated earth including watering and raming as directed by the Engineer -in -charge.
1661.06
-
113.45
Supplying all labour, T&P for cutting CC road for laying of PVC pipe
16.88
-
585.4
Supplying all labour, T&P for C.C.(1:2:4) with 12mm size hard granite chips and mending good the damages of C.C. Road for laying of PVC Pipe line with all complete
16.88
-
5750.44
Cutting metal road for taking pipe line and making good to the damages
200
-
311.94
Laying in trenches HDPE pipes confirming toIS 4984-1995 and specials of following out following outside diameter and Class-1 to Class-3 and jointing by Fusion welding methed inluding testing as per specification complete. a.75mm dia High Density Polyethylene Pipe PN 6.0
3040
-
249.52
f.110mm dia High Density Polyethylene Pipe PN 8.0
1060
-
755.72
g.110mm dia High Density Polyethylene Pipe PN 8.0
250
-
1334.11
Providing and fixing cast iron sluice valve with double flanged ends for water works purposes for the following rating (ISI 14846-2000) and subsequent ammendment if any) and nominal dia meter ( including the cost of all materials) and as per specification complete.a.50 mm Dia
4
-
3734.92
b.100 mm Dia
1
-
6975.8
c.150 mm Dia
1
-
10881.21
Providing and fixing swing check type reflux valves (Non returns valve) with double flanged ends for water works purposes for the following rating (1.6MPA confirming to IS 5312-1984 and sebsequent ammendment if any ) and nominal diameter ( including the cost of all materials) as per specification complete.a.50 mm Dia
1
-
3340.01
c.150 mm Dia
1
-
8884.94
Providing and fixing 15mm to 25mm dia single Air valve for water works purposes for the following dia meter including drilling the water main (including all cost of materials) as per specification complete. a.15mm dia
2
-
1892.85
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate non-return valves and sluice valves as per PH specification complete.
8
-
13239
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate Air valves as per PH specification complete.
1
-
10637
INDIVIDUAL HOUSE HOLD WATER SUPPLY CONNECTION BY TAP Supplying all materials labour T&P for fitting and fixing of metal or PVC febricated shadle with suitable o ring, nuts and bolts etc with 1/8'' inch dia GM ferrule cock ,required 15mm to 20mm dia GI fittings,20mm dia GI pipe of 1.00 mtr length , making concrete block with 110mm OD PVC pipe of required length for stand point ,cutting hole through brick/ stone masonary wall with necessary earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
140
-
1892
Supplying all materials labour T&P for laying of 20mm dia HDPE pipe (PE-80,PN -10) incluiding earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
700
-
71.4
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages
140
-
92
Construction of Display Board (1.5M. X 1.5M.)
1
-
4549
Pump Chamber of size 3mtr X 3mtr inside dimension - Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
12.42
-
204.22
Sand filling in foundation and plinth well watered and rammed including cost carriage and royalty(Sand filling at headworks site 120+ Pump Chamber site 5.35)
125.35
-
382.56
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
2.6
-
4056.65
Random rubble HG stone maonry in cement mortar (1:6) in foundation and plinth
7.9
-
3472.09
a.Fly Ash Brick masonry in CM (1:6) in foundation plinth including cost carriage royalty of all materials
0.82
-
4330.31
b. Fly Ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials
8.46
-
4363.64
Earth filling with excavated materials including watering and ramming etc all complete
3.36
-
113.45
Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete. a)R.C.C. Foundation, Plinth Bend
3.9
-
101.71
b) RCC Lintel
2.43
-
264.1
c)RCC Roof and chajja
15.77
-
429.25
RCC M20 with 12 mm size HG chips including hoisting lowering and laying the concrete including cost carriage royalty of all materials
2.61
-
5368.24
2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials
14.44
-
308.7
Cutting bending binding and tying the MS grills and placing in position including cost and carriage of MS rod and cost of binding wire including carriage of all materials
2.35
-
8450.76
12mm thick cement plaster (1:4) over brick masonry work including cement punning and bituminus painting over top of wall including cost carriage and royality of all materials
3.25
-
207.5
12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials
93.18
-
145.11
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete.
11.95
-
300.21
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips including cost carriage royalty of all materials etc all complete
4.05
-
318.9
Supplying all materials labour T&P and providing Weather coat to new plastered surface including transportation charges taxes etc all complete
93.18
-
136.65
Supplying all materials labour T&P and finishing walls with Plastic emulsion paint of approved shade with two coats to give an even shade including cost of paint and carriage charges etc all complete.
93.18
-
88.17
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )
90
-
75
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 4.50 kg / sqft )
73.5
-
70
Supplying all materials labour T&P and providing 5 cm thick RCC Shelf in cc(1:2:4) with CB HG Chips 12 mm size fitted and fixed in position finished smooth complete with all materials etc all complete
73.5
-
75
Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete
9.68
-
137.93
Fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials.
11.95
-
965.1
Fixing tiles in dados, skirting and risers of steps on 12mm cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.
5.5
-
1069.46
Providing & Fixing CHEQURED TILES in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.
15.21
-
499.59
Internal Electrification - Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge.
10
-
170
Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge.
2
-
165
Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required
7
-
32
Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. 32 Amp D.P.main switch with porcelain base
1
-
951
Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.63 Amp TPN Main switch
1
-
3506
Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
1555
Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
85
Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required.(a) 250mmx200mmx75mm
1
-
160
(b) 180mmx100mmx60mm
1
-
84
Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required a. 4x10 sqmm + 2x6 sqmm
5
-
460
b.3x10 sqmm + 1x6 sqmm
5
-
335
c.2x4 sqmm + 1x2.5 sqmm
2
-
125
d.2x2.5 sqmm + 1x1.5 sqmm
5
-
95
e.3x1.5 sqmm + 1x1.5 sqmm
2.5
-
90
Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction fo the Engineer in charge.a.Short point
2
-
330
b.Medium point
1
-
430
c.Long point
1
-
550
Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge.
2
-
435
Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. A.5 / 6 Amp one way switch (Piano type)
5
-
21
B.3 Pin 5/6 socket outlet (piano tytpe)
1
-
34
Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required.
15
-
58
Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required
0.3
-
530
Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc with charcoal and salt as required.
1
-
1875
Boundary Wall for 60 mtr - Earth work in hard soil and gravelley soil within 50m, initial lead and 1.5, initial lift including rough dressing and breaking clods to maximum 5 cm to7 cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge.
33.75
-
188.79
Filling in plinth with selected sand in the areas within initial lead & lift, including cost of materials, labours, T&P etc. complete.
6.75
-
382.56
Providing & laying cement concrete of proportion ( 1:4:8 )of 40mm downgraded stone aggregate of specified thickness for foundations below walls, column footings at any depth below floors etc. including centering, shuttering if required laying spreading, ramming, and curing etc.complete including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer-in-charge.
6.75
-
4056.65
Providing and constructing Random rubble H.G. stone masonry at foundation in cement mortar 1:6 including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer-in-charge.
24.3
-
3472.09
2.5cm Dam proof course (DPC) with CC (1:2:4) using 12mm size CBHG chips including cost, conveyance, royality, of all materials etc. complete as per direction of Engineer-in-charge.
27
-
297.57
Providing and constructing Brick masonry at all floors and locations using best approved quality flyash bricks from local available using in cement mortar 1:6 to correct line, level & plumb, including, scaffolding, watering, curing, recking out joints etc. including cost of all materials, labour, transportation etc. complete as per direction of engineer-in-charge.
20.17
-
4330.31
Providing and applying cement plaster 16mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P , curing etc. complete as direction of Engineer-in-charge.
100.87
-
205.52
Providing and applying cement plaster 12mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P , curing etc. complete as direction of Engineer-in-charge.
100.87
-
145.11
Finishing wall with weather coat two coats of approved shade on new plastered surface to give an even shade including cost, conveyance, royalities of materials, labour, T&P, required for the work etc. all complete
201.73
-
136.65
Filling in foundation & plinth with excavated materials including watering and ramming as directed by the engineer-in-charge.
4.05
-
113.45
Providing and fixing ms fabricated gate to the boundary
45
-
70
Painting two coats with enamel paint over one coat of primer
0.9
-
193.01
Walkway and cover slab - Supply all materials, labour, T&P, Welding rods, gas etc. for fabricating and welding of different sizes of MS angles, joist channel, MS/G.I pipe, flat and sheets of 4mm thick as per the required site condition for covering the 5mtr dia RCC/ Masonary well with MS/G.I ralling, necessary precaution to prevent entry of foreign materials like leaves, earth and dust into the well, filling cavities & gaps with CC(1:2:4), finished smooth including painting two coats with approved enamel paint over a coat of redoxide primer to sheet, channel and ralling complete including GST & cess , as per the direction of Engineer-in-charge. a.MS Channel 100x50x50x6 mm
257.6
-
67
b. MS Angel 50x50x6
266
-
70
C. MS Angel 25x25x6
40.5
-
70
d. Flat 6mm thick
25.14
-
70
e.2.5mm thick plate covering
491.79
-
75
Providing and Laying fabricated G.I pipes and specials as dimentionaly mentioned in proper position / alignment as directed by the concern Engineer in charge including cost, conveyance, loading, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main/distrubution system, welding on automatic welding machine including cost of all materials, labour, T&P consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. A. Stand
11
-
1086.14
b. Railing with 40mm G.I pipe
51
-
504.49
Painting two coats with any approved enamel paints over a coat of redoxide primer including cost of all materials and labour charges etc. complete.
23.84
-
193.01
Operation & maintainance for 5 years @ 1% per year
5
-
52128.13
PWS Scheme to village Sitapanga - PROCUREMENT OF SUBMERSIBLE PUMP INCLUIDING COST OF LOWERING.Supplying of Vertical / Open well submersible pump set in multistage construction with radial or mixed flow impellers coupeled with totaly enclosed water filled squirrel cage induction motor to operate at 2850rpm rated voltage 380-415 volt 50 Hz AC SINGLE /3phase power supply capable of discharging as noted below of any reputed make like KSB/CROMPTON/CRI/Kirloskar confirming to relevant IS specification IS 14220 for installing in RCC intake well /Percolation well.Vertical submersible pump 2 HP of 2 Nos.
2
-
15980.45
ACCESSORIES Supplying of 3 phase star delta controll pannel suitable for above submersible pump fitted with voltameter ,Ampermeter, selector, switch, main switch, fuse indicator ,connector,on/of switch with strater component with over load protection and single phasepreventor enclosed in a sheet steel encloser of any reputed make ( like BCH /switch and gear /L&T /Havells)
2
-
4000
ii) Procurement of submersible 4 sqmm flat cable of reputed make.
50
-
95.52
iii) Procurement of GI/GI column pipe of required dia (3mtr length) including fitting and fixture. a.40 mm dia
5
-
504.49
b. 40mm dia flanges
5
-
207.14
c. 40mm flange joint
4
-
136.26
d. 4 mm² PVC insulated wire rope with clamp
10
-
35
Installation of pumping set into Open well/Tubewell including fitting fixing of electrical accessories such as main switch, control pannel unit including jointing, lowering of column pipe & cable and incluiding bore clamp, bore cap etc as required complete.
1
-
4443
Storage reservoir - Designing, Testing and commissioning of R.C.C 20KL ESR with 10m staging suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc. including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the ESR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
1231682
Treatment unit - Providing chlorination arrangement of required capacity with agitator, Dosing Pump as per approved design including cost and installation of all materials, pipes, fittings, valves etc all complete.
1
-
40000
Earth in excavation intrenches for laying of pipe lines in all kinds of soil including dressing and levelling the bed of foundation, braeking clods and depositing the excavated soil with initial lead of 50m and initial lift of 1.5m as per direction of engineer in charge
2190
-
204.22
Refilling the pipe line trenches with the excavated earth including watering and raming as directed by the Engineer -in -charge.
2164.19
-
113.45
Laying in trenches HDPE pipes confirming toIS 4984-1995 and specials of following out following outside diameter and Class-1 to Class-3 and jointing by Fusion welding methed inluding testing as per specification complete. a.75mm dia High Density Polyethylene Pipe PN 6.0
5840
-
249.52
Providing and fixing cast iron sluice valve with double flanged ends for water works purposes for the following rating (ISI 14846-2000) and subsequent ammendment if any) and nominal dia meter ( including the cost of all materials) and as per specification complete.a.50 mm Dia
2
-
3734.92
Providing and fixing swing check type reflux valves (Non returns valve) with double flanged ends for water works purposes for the following rating (1.6MPA confirming to IS 5312-1984 and sebsequent ammendment if any ) and nominal diameter ( including the cost of all materials) as per specification complete.a.50 mm Dia
2
-
3340.01
Providing and fixing 15mm to 25mm dia single Air valve for water works purposes for the following dia meter including drilling the water main (including all cost of materials) as per specification complete. a.15mm dia
2
-
1892.85
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate non-return valves and sluice valves as per PH specification complete.
4
-
13239
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate Air valves as per PH specification complete.
1
-
10637
INDIVIDUAL HOUSE HOLD WATER SUPPLY CONNECTION BY TAP Supplying all materials labour T&P for fitting and fixing of metal or PVC febricated shadle with suitable o ring, nuts and bolts etc with 1/8'' inch dia GM ferrule cock ,required 15mm to 20mm dia GI fittings,20mm dia GI pipe of 1.00 mtr length , making concrete block with 110mm OD PVC pipe of required length for stand point ,cutting hole through brick/ stone masonary wall with necessary earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
60
-
1892
Supplying all materials labour T&P for laying of 20mm dia HDPE pipe (PE-80,PN -10) incluiding earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
300
-
71.4
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages
60
-
92
Construction of Display Board (1.5M. X 1.5M.)
1
-
4549
Pump Chamber of size 3mtr X 3mtr inside dimension - Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
12.42
-
204.22
Sand filling in foundation and plinth well watered and rammed including cost carriage and royalty
5.35
-
382.56
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
2.6
-
4056.65
Random rubble HG stone maonry in cement mortar (1:6) in foundation and plinth
7.9
-
3472.09
a.Fly Ash Brick masonry in CM (1:6) in foundation plinth including cost carriage royalty of all materials
0.82
-
4330.31
b. Fly Ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials
8.46
-
4363.64
Earth filling with excavated materials including watering and ramming etc all complete
3.36
-
113.45
Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete. a)R.C.C. Foundation, Plinth Bend
3.9
-
101.71
b) RCC Lintel
2.43
-
264.1
c)RCC Roof and chajja
15.77
-
429.25
RCC M20 with 12 mm size HG chips including hoisting lowering and laying the concrete including cost carriage royalty of all materials
2.61
-
5368.24
2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials
14.44
-
308.7
Cutting bending binding and tying the MS grills and placing in position including cost and carriage of MS rod and cost of binding wire including carriage of all materials
2.35
-
8450.76
12mm thick cement plaster (1:4) over brick masonry work including cement punning and bituminus painting over top of wall including cost carriage and royality of all materials
3.25
-
207.5
12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials
93.18
-
145.11
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete.
11.95
-
300.21
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips including cost carriage royalty of all materials etc all complete
4.05
-
318.9
Supplying all materials labour T&P and providing Weather coat to new plastered surface including transportation charges taxes etc all complete
93.18
-
136.65
Supplying all materials labour T&P and finishing walls with Plastic emulsion paint of approved shade with two coats to give an even shade including cost of paint and carriage charges etc all complete.
93.18
-
88.17
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )
90
-
75
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 4.50 kg / sqft )
73.5
-
70
Supplying all materials labour T&P and providing 5 cm thick RCC Shelf in cc(1:2:4) with CB HG Chips 12 mm size fitted and fixed in position finished smooth complete with all materials etc all complete
73.5
-
75
Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete
9.68
-
137.93
Fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials.
11.95
-
965.1
Fixing tiles in dados, skirting and risers of steps on 12mm cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.
5.5
-
1069.46
Providing & Fixing CHEQURED TILES in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.
15.21
-
499.59
Internal Electrification - Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge.
10
-
170
Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge.
2
-
165
Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required
7
-
32
Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. 32 Amp D.P.main switch with porcelain base
1
-
951
Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.63 Amp TPN Main switch
1
-
3506
Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
1555
Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
85
Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required.(a) 250mmx200mmx75mm
1
-
160
(b) 180mmx100mmx60mm
1
-
84
Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required a. 4x10 sqmm + 2x6 sqmm
5
-
460
b.3x10 sqmm + 1x6 sqmm
5
-
335
c.2x4 sqmm + 1x2.5 sqmm
2
-
125
d.2x2.5 sqmm + 1x1.5 sqmm
5
-
95
e.3x1.5 sqmm + 1x1.5 sqmm
2.5
-
90
Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction fo the Engineer in charge.a.Short point
2
-
330
b.Medium point
1
-
430
c.Long point
1
-
550
Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge.
2
-
435
Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. A.5 / 6 Amp one way switch (Piano type)
5
-
21
B.3 Pin 5/6 socket outlet (piano tytpe)
1
-
34
Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required.
15
-
58
Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required
0.3
-
530
Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc with charcoal and salt as required.
1
-
1875
Walkway and cover slab - Supply all materials, labour, T&P, Welding rods, gas etc. for fabricating and welding of different sizes of MS angles, joist channel, MS/G.I pipe, flat and sheets of 4mm thick as per the required site condition for covering the 5mtr dia RCC/ Masonary well with MS/G.I ralling, necessary precaution to prevent entry of foreign materials like leaves, earth and dust into the well, filling cavities & gaps with CC(1:2:4), finished smooth including painting two coats with approved enamel paint over a coat of redoxide primer to sheet, channel and ralling complete including GST & cess , as per the direction of Engineer-in-charge. a.MS Channel 100x50x50x6 mm
257.6
-
67
b. MS Angel 50x50x6
266
-
70
C. MS Angel 25x25x6
40.5
-
70
d. Flat 6mm thick
25.14
-
70
e.2.5mm thick plate covering
491.79
-
75
Providing and Laying fabricated G.I pipes and specials as dimentionaly mentioned in proper position / alignment as directed by the concern Engineer in charge including cost, conveyance, loading, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main/distrubution system, welding on automatic welding machine including cost of all materials, labour, T&P consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. A. Stand
11
-
1086.14
b. Railing with 40mm G.I pipe
51
-
504.49
Painting two coats with any approved enamel paints over a coat of redoxide primer including cost of all materials and labour charges etc. complete.
23.84
-
193.01
Operation & maintainance for 5 years @ 1% per year
5
-
40538.52
PWS Scheme to village Katabadi - PROCUREMENT OF SUBMERSIBLE PUMP INCLUIDING COST OF LOWERING.Supplying of Vertical / Open well submersible pump set in multistage construction with radial or mixed flow impellers coupeled with totaly enclosed water filled squirrel cage induction motor to operate at 2850rpm rated voltage 380-415 volt 50 Hz AC SINGLE /3phase power supply capable of discharging as noted below of any reputed make like KSB/CROMPTON/CRI/Kirloskar confirming to relevant IS specification IS 14220 for installing in RCC intake well /Percolation well.Vertical submersible pump 2 HP of 2 Nos.
2
-
15980.45
ACCESSORIES Supplying of 3 phase star delta controll pannel suitable for above submersible pump fitted with voltameter ,Ampermeter, selector, switch, main switch, fuse indicator ,connector,on/of switch with strater component with over load protection and single phasepreventor enclosed in a sheet steel encloser of any reputed make ( like BCH /switch and gear /L&T /Havells)
2
-
4000
ii) Procurement of submersible 4 sqmm flat cable of reputed make.
50
-
95.52
iii) Procurement of GI/GI column pipe of required dia (3mtr length) including fitting and fixture. a.40 mm dia
5
-
504.49
b. 40mm dia flanges
5
-
207.14
c. 40mm flange joint
4
-
136.26
d. 4 mm² PVC insulated wire rope with clamp
10
-
35
Installation of pumping set into Open well/Tubewell including fitting fixing of electrical accessories such as main switch, control pannel unit including jointing, lowering of column pipe & cable and incluiding bore clamp, bore cap etc as required complete.
1
-
4443
Storage reservoir - Designing, Testing and commissioning of R.C.C 20KL ESR with 10m staging suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc. including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the ESR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
1231682
Treatment unit - Providing chlorination arrangement of required capacity with agitator, Dosing Pump as per approved design including cost and installation of all materials, pipes, fittings, valves etc all complete.
1
-
40000
Rising main and Distribution system - Providing and laying fabricated G.I pipes of TATA/Jindal make and specials as dimentionally mentioned in proper position / alignment as directed by the concern Engineer in charge including conveyance from stores to site of work, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main / distribution system, welding on automatic welding machine including cost of all materials, labour, T&P , consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. a.65 mm dia G.I. Pipe (Medium class)
20
-
857.1
Earth in excavation intrenches for laying of pipe lines in all kinds of soil including dressing and levelling the bed of foundation, braeking clods and depositing the excavated soil with initial lead of 50m and initial lift of 1.5m as per direction of engineer in charge
1054.65
-
204.22
Refilling the pipe line trenches with the excavated earth including watering and raming as directed by the Engineer -in -charge.
1041.94
-
113.45
Supplying all labour, T&P for cutting CC road for laying of PVC pipe
16.88
-
585.4
Supplying all labour, T&P for C.C.(1:2:4) with 12mm size hard granite chips and mending good the damages of C.C. Road for laying of PVC Pipe line with all complete
16.88
-
5750.44
Cutting metal road for taking pipe line and making good to the damages
200
-
311.94
Laying in trenches HDPE pipes confirming toIS 4984-1995 and specials of following out following outside diameter and Class-1 to Class-3 and jointing by Fusion welding methed inluding testing as per specification complete. a.75mm dia High Density Polyethylene Pipe PN 6.0
2646
-
249.52
b.90mm dia High Density Polyethylene Pipe PN 6.0
160
-
333.42
Providing and fixing cast iron sluice valve with double flanged ends for water works purposes for the following rating (ISI 14846-2000) and subsequent ammendment if any) and nominal dia meter ( including the cost of all materials) and as per specification complete.a.50 mm Dia
7
-
3734.92
b.80 mm Dia
1
-
4928.15
Providing and fixing swing check type reflux valves (Non returns valve) with double flanged ends for water works purposes for the following rating (1.6MPA confirming to IS 5312-1984 and sebsequent ammendment if any ) and nominal diameter ( including the cost of all materials) as per specification complete.a.50 mm Dia
1
-
3340.01
b.80 mm Dia
1
-
4408.96
Providing and fixing 15mm to 25mm dia single Air valve for water works purposes for the following dia meter including drilling the water main (including all cost of materials) as per specification complete. a.15mm dia
2
-
1892.85
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate non-return valves and sluice valves as per PH specification complete.
10
-
13239
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate Air valves as per PH specification complete.
1
-
10637
INDIVIDUAL HOUSE HOLD WATER SUPPLY CONNECTION BY TAP Supplying all materials labour T&P for fitting and fixing of metal or PVC febricated shadle with suitable o ring, nuts and bolts etc with 1/8'' inch dia GM ferrule cock ,required 15mm to 20mm dia GI fittings,20mm dia GI pipe of 1.00 mtr length , making concrete block with 110mm OD PVC pipe of required length for stand point ,cutting hole through brick/ stone masonary wall with necessary earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
78
-
1892
Supplying all materials labour T&P for laying of 20mm dia HDPE pipe (PE-80,PN -10) incluiding earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
390
-
71.4
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages
78
-
92
Construction of Display Board (1.5M. X 1.5M.)
1
-
4549
Pump Chamber of size 3mtr X 3mtr inside dimension - Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
12.42
-
204.22
Sand filling in foundation and plinth well watered and rammed including cost carriage and royalty(Sand filling at headworks site 120+ Pump Chamber site 5.35)
125.35
-
382.56
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
2.6
-
4056.65
Random rubble HG stone maonry in cement mortar (1:6) in foundation and plinth
7.9
-
3472.09
a.Fly Ash Brick masonry in CM (1:6) in foundation plinth including cost carriage royalty of all materials
0.82
-
4330.31
b. Fly Ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials
8.46
-
4363.64
Earth filling with excavated materials including watering and ramming etc all complete
3.36
-
113.45
Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete. a)R.C.C. Foundation, Plinth Bend
3.9
-
101.71
b) RCC Lintel
2.43
-
264.1
c)RCC Roof and chajja
15.77
-
429.25
RCC M20 with 12 mm size HG chips including hoisting lowering and laying the concrete including cost carriage royalty of all materials
2.61
-
5368.24
2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials
14.44
-
308.7
Cutting bending binding and tying the MS grills and placing in position including cost and carriage of MS rod and cost of binding wire including carriage of all materials
2.35
-
8450.76
12mm thick cement plaster (1:4) over brick masonry work including cement punning and bituminus painting over top of wall including cost carriage and royality of all materials
3.25
-
207.5
12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials
93.18
-
145.11
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete.
11.95
-
300.21
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips including cost carriage royalty of all materials etc all complete
4.05
-
318.9
Supplying all materials labour T&P and providing Weather coat to new plastered surface including transportation charges taxes etc all complete
93.18
-
136.65
Supplying all materials labour T&P and finishing walls with Plastic emulsion paint of approved shade with two coats to give an even shade including cost of paint and carriage charges etc all complete.
93.18
-
88.17
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )
90
-
75
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 4.50 kg / sqft )
73.5
-
70
Supplying all materials labour T&P and providing 5 cm thick RCC Shelf in cc(1:2:4) with CB HG Chips 12 mm size fitted and fixed in position finished smooth complete with all materials etc all complete
73.5
-
75
Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete
9.68
-
137.93
Fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials.
11.95
-
965.1
Fixing tiles in dados, skirting and risers of steps on 12mm cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.
5.5
-
1069.46
Providing & Fixing CHEQURED TILES in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.
15.21
-
499.59
Internal Electrification - Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge.
10
-
170
Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge.
2
-
165
Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required
7
-
32
Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. 32 Amp D.P.main switch with porcelain base
1
-
951
Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.63 Amp TPN Main switch
1
-
3506
Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
1555
Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
85
Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required.(a) 250mmx200mmx75mm
1
-
160
(b) 180mmx100mmx60mm
1
-
84
Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required a. 4x10 sqmm + 2x6 sqmm
5
-
460
b.3x10 sqmm + 1x6 sqmm
5
-
335
c.2x4 sqmm + 1x2.5 sqmm
2
-
125
d.2x2.5 sqmm + 1x1.5 sqmm
5
-
95
e.3x1.5 sqmm + 1x1.5 sqmm
2.5
-
90
Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction fo the Engineer in charge.a.Short point
2
-
330
b.Medium point
1
-
430
c.Long point
1
-
550
Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge.
2
-
435
Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. A.5 / 6 Amp one way switch (Piano type)
5
-
21
B.3 Pin 5/6 socket outlet (piano tytpe)
1
-
34
Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required.
15
-
58
Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required
0.3
-
530
Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc with charcoal and salt as required.
1
-
1875
Boundary Wall for 60 mtr - Earth work in hard soil and gravelley soil within 50m, initial lead and 1.5, initial lift including rough dressing and breaking clods to maximum 5 cm to7 cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge.
33.75
-
188.79
Filling in plinth with selected sand in the areas within initial lead & lift, including cost of materials, labours, T&P etc. complete.
6.75
-
382.56
Providing & laying cement concrete of proportion ( 1:4:8 )of 40mm downgraded stone aggregate of specified thickness for foundations below walls, column footings at any depth below floors etc. including centering, shuttering if required laying spreading, ramming, and curing etc.complete including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer-in-charge.
6.75
-
4056.65
Providing and constructing Random rubble H.G. stone masonry at foundation in cement mortar 1:6 including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer-in-charge.
24.3
-
3472.09
2.5cm Dam proof course (DPC) with CC (1:2:4) using 12mm size CBHG chips including cost, conveyance, royality, of all materials etc. complete as per direction of Engineer-in-charge.
27
-
297.57
Providing and constructing Brick masonry at all floors and locations using best approved quality flyash bricks from local available using in cement mortar 1:6 to correct line, level & plumb, including, scaffolding, watering, curing, recking out joints etc. including cost of all materials, labour, transportation etc. complete as per direction of engineer-in-charge.
20.17
-
4330.31
Providing and applying cement plaster 16mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P , curing etc. complete as direction of Engineer-in-charge.
100.87
-
205.52
Providing and applying cement plaster 12mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P , curing etc. complete as direction of Engineer-in-charge.
100.87
-
145.11
Finishing wall with weather coat two coats of approved shade on new plastered surface to give an even shade including cost, conveyance, royalities of materials, labour, T&P, required for the work etc. all complete
201.73
-
136.65
Filling in foundation & plinth with excavated materials including watering and ramming as directed by the engineer-in-charge.
4.05
-
113.45
Providing and fixing ms fabricated gate to the boundary
45
-
70
Painting two coats with enamel paint over one coat of primer
0.9
-
193.01
Walkway and cover slab - Supply all materials, labour, T&P, Welding rods, gas etc. for fabricating and welding of different sizes of MS angles, joist channel, MS/G.I pipe, flat and sheets of 4mm thick as per the required site condition for covering the 5mtr dia RCC/ Masonary well with MS/G.I ralling, necessary precaution to prevent entry of foreign materials like leaves, earth and dust into the well, filling cavities & gaps with CC(1:2:4), finished smooth including painting two coats with approved enamel paint over a coat of redoxide primer to sheet, channel and ralling complete including GST & cess , as per the direction of Engineer-in-charge. a.MS Channel 100x50x50x6 mm
257.6
-
67
b. MS Angel 50x50x6
266
-
70
C. MS Angel 25x25x6
40.5
-
70
d. Flat 6mm thick
25.14
-
70
e.2.5mm thick plate covering
491.79
-
75
Providing and Laying fabricated G.I pipes and specials as dimentionaly mentioned in proper position / alignment as directed by the concern Engineer in charge including cost, conveyance, loading, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main/distrubution system, welding on automatic welding machine including cost of all materials, labour, T&P consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. A. Stand
11
-
1086.14
b. Railing with 40mm G.I pipe
51
-
504.49
Painting two coats with any approved enamel paints over a coat of redoxide primer including cost of all materials and labour charges etc. complete.
23.84
-
193.01
Operation & maintainance for 5 years @ 1% per year
5
-
36124.84
PWS Scheme to village Sujamaju - PROCUREMENT OF SUBMERSIBLE PUMP INCLUIDING COST OF LOWERING.Supplying of Vertical / Open well submersible pump set in multistage construction with radial or mixed flow impellers coupeled with totaly enclosed water filled squirrel cage induction motor to operate at 2850rpm rated voltage 380-415 volt 50 Hz AC SINGLE /3phase power supply capable of discharging as noted below of any reputed make like KSB/CROMPTON/CRI/Kirloskar confirming to relevant IS specification IS 14220 for installing in RCC intake well /Percolation well.Vertical submersible pump 2 HP of 2 Nos.
2
-
15980.45
ACCESSORIES Supplying of 3 phase star delta controll pannel suitable for above submersible pump fitted with voltameter ,Ampermeter, selector, switch, main switch, fuse indicator ,connector,on/of switch with strater component with over load protection and single phasepreventor enclosed in a sheet steel encloser of any reputed make ( like BCH /switch and gear /L&T /Havells)
2
-
4000
ii) Procurement of submersible 4 sqmm flat cable of reputed make.
50
-
95.52
iii) Procurement of GI/GI column pipe of required dia (3mtr length) including fitting and fixture. a.40 mm dia
5
-
504.49
b. 40mm dia flanges
5
-
207.14
c. 40mm flange joint
4
-
136.26
d. 4 mm² PVC insulated wire rope with clamp
10
-
35
Installation of pumping set into Open well/Tubewell including fitting fixing of electrical accessories such as main switch, control pannel unit including jointing, lowering of column pipe & cable and incluiding bore clamp, bore cap etc as required complete.
1
-
4443
Storage reservoir - Designing, Testing and commissioning of R.C.C 20KL OGR with suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc. including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the OGR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
353550
Treatment unit - Providing chlorination arrangement of required capacity with agitator, Dosing Pump as per approved design including cost and installation of all materials, pipes, fittings, valves etc all complete.
1
-
40000
Rising main and Distribution system - Providing and laying fabricated G.I pipes of TATA/Jindal make and specials as dimentionally mentioned in proper position / alignment as directed by the concern Engineer in charge including conveyance from stores to site of work, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main / distribution system, welding on automatic welding machine including cost of all materials, labour, T&P , consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. a.65 mm dia G.I. Pipe (Medium class)
20
-
857.1
Earth in excavation intrenches for laying of pipe lines in all kinds of soil including dressing and levelling the bed of foundation, braeking clods and depositing the excavated soil with initial lead of 50m and initial lift of 1.5m as per direction of engineer in charge
2383.13
-
204.22
Refilling the pipe line trenches with the excavated earth including watering and raming as directed by the Engineer -in -charge.
2355.04
-
113.45
Supplying all labour, T&P for cutting CC road for laying of PVC pipe
3.38
-
585.4
Supplying all labour, T&P for C.C.(1:2:4) with 12mm size hard granite chips and mending good the damages of C.C. Road for laying of PVC Pipe line with all complete
3.38
-
5750.44
Cutting metal road for taking pipe line and making good to the damages
60
-
311.94
Laying in trenches HDPE pipes confirming toIS 4984-1995 and specials of following out following outside diameter and Class-1 to Class-3 and jointing by Fusion welding methed inluding testing as per specification complete. a.75mm dia High Density Polyethylene Pipe PN 6.0
6355
-
249.52
Providing and fixing cast iron sluice valve with double flanged ends for water works purposes for the following rating (ISI 14846-2000) and subsequent ammendment if any) and nominal dia meter ( including the cost of all materials) and as per specification complete.a.50 mm Dia
8
-
3734.92
Providing and fixing swing check type reflux valves (Non returns valve) with double flanged ends for water works purposes for the following rating (1.6MPA confirming to IS 5312-1984 and sebsequent ammendment if any ) and nominal diameter ( including the cost of all materials) as per specification complete.a.50 mm Dia
2
-
3340.01
Providing and fixing 15mm to 25mm dia single Air valve for water works purposes for the following dia meter including drilling the water main (including all cost of materials) as per specification complete. a.15mm dia
2
-
1892.85
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate non-return valves and sluice valves as per PH specification complete.
10
-
13239
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate Air valves as per PH specification complete.
1
-
10637
INDIVIDUAL HOUSE HOLD WATER SUPPLY CONNECTION BY TAP Supplying all materials labour T&P for fitting and fixing of metal or PVC febricated shadle with suitable o ring, nuts and bolts etc with 1/8'' inch dia GM ferrule cock ,required 15mm to 20mm dia GI fittings,20mm dia GI pipe of 1.00 mtr length , making concrete block with 110mm OD PVC pipe of required length for stand point ,cutting hole through brick/ stone masonary wall with necessary earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
62
-
1892
Supplying all materials labour T&P for laying of 20mm dia HDPE pipe (PE-80,PN -10) incluiding earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
310
-
71.4
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages
62
-
92
Construction of Display Board (1.5M. X 1.5M.)
1
-
4549
Pump Chamber of size 3mtr X 3mtr inside dimension - Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
12.42
-
204.22
Sand filling in foundation and plinth well watered and rammed including cost carriage and royalty
5.35
-
382.56
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
2.6
-
4056.65
Random rubble HG stone maonry in cement mortar (1:6) in foundation and plinth
7.9
-
3472.09
a.Fly Ash Brick masonry in CM (1:6) in foundation plinth including cost carriage royalty of all materials
0.82
-
4330.31
b. Fly Ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials
8.46
-
4363.64
Earth filling with excavated materials including watering and ramming etc all complete
3.36
-
113.45
Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete. a)R.C.C. Foundation, Plinth Bend
3.9
-
101.71
b) RCC Lintel
2.43
-
264.1
c)RCC Roof and chajja
15.77
-
429.25
RCC M20 with 12 mm size HG chips including hoisting lowering and laying the concrete including cost carriage royalty of all materials
2.61
-
5368.24
2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials
14.44
-
308.7
Cutting bending binding and tying the MS grills and placing in position including cost and carriage of MS rod and cost of binding wire including carriage of all materials
2.35
-
8450.76
12mm thick cement plaster (1:4) over brick masonry work including cement punning and bituminus painting over top of wall including cost carriage and royality of all materials
3.25
-
207.5
12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials
93.18
-
145.11
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete.
11.95
-
300.21
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips including cost carriage royalty of all materials etc all complete
4.05
-
318.9
Supplying all materials labour T&P and providing Weather coat to new plastered surface including transportation charges taxes etc all complete
93.18
-
136.65
Supplying all materials labour T&P and finishing walls with Plastic emulsion paint of approved shade with two coats to give an even shade including cost of paint and carriage charges etc all complete.
93.18
-
88.17
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )
90
-
75
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 4.50 kg / sqft )
73.5
-
70
Supplying all materials labour T&P and providing 5 cm thick RCC Shelf in cc(1:2:4) with CB HG Chips 12 mm size fitted and fixed in position finished smooth complete with all materials etc all complete
73.5
-
75
Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete
9.68
-
137.93
Fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials.
11.95
-
965.1
Fixing tiles in dados, skirting and risers of steps on 12mm cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.
5.5
-
1069.46
Providing & Fixing CHEQURED TILES in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.
15.21
-
499.59
Internal Electrification - Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge.
10
-
170
Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge.
2
-
165
Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required
7
-
32
Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. 32 Amp D.P.main switch with porcelain base
1
-
951
Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.63 Amp TPN Main switch
1
-
3506
Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
1555
Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
85
Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required.(a) 250mmx200mmx75mm
1
-
160
(b) 180mmx100mmx60mm
1
-
84
Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required a. 4x10 sqmm + 2x6 sqmm
5
-
460
b.3x10 sqmm + 1x6 sqmm
5
-
335
c.2x4 sqmm + 1x2.5 sqmm
2
-
125
d.2x2.5 sqmm + 1x1.5 sqmm
5
-
95
e.3x1.5 sqmm + 1x1.5 sqmm
2.5
-
90
Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction fo the Engineer in charge.a.Short point
2
-
330
b.Medium point
1
-
430
c.Long point
1
-
550
Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge.
2
-
435
Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. A.5 / 6 Amp one way switch (Piano type)
5
-
21
B.3 Pin 5/6 socket outlet (piano tytpe)
1
-
34
Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required.
15
-
58
Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required
0.3
-
530
Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc with charcoal and salt as required.
1
-
1875
Boundary Wall for 60 mtr - Earth work in hard soil and gravelley soil within 50m, initial lead and 1.5, initial lift including rough dressing and breaking clods to maximum 5 cm to7 cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge.
33.75
-
188.79
Filling in plinth with selected sand in the areas within initial lead & lift, including cost of materials, labours, T&P etc. complete.
6.75
-
382.56
Providing & laying cement concrete of proportion ( 1:4:8 )of 40mm downgraded stone aggregate of specified thickness for foundations below walls, column footings at any depth below floors etc. including centering, shuttering if required laying spreading, ramming, and curing etc.complete including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer-in-charge.
6.75
-
4056.65
Providing and constructing Random rubble H.G. stone masonry at foundation in cement mortar 1:6 including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer-in-charge.
24.3
-
3472.09
2.5cm Dam proof course (DPC) with CC (1:2:4) using 12mm size CBHG chips including cost, conveyance, royality, of all materials etc. complete as per direction of Engineer-in-charge.
27
-
297.57
Providing and constructing Brick masonry at all floors and locations using best approved quality flyash bricks from local available using in cement mortar 1:6 to correct line, level & plumb, including, scaffolding, watering, curing, recking out joints etc. including cost of all materials, labour, transportation etc. complete as per direction of engineer-in-charge.
20.17
-
4330.31
Providing and applying cement plaster 16mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P , curing etc. complete as direction of Engineer-in-charge.
100.87
-
205.52
Providing and applying cement plaster 12mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P , curing etc. complete as direction of Engineer-in-charge.
100.87
-
145.11
Finishing wall with weather coat two coats of approved shade on new plastered surface to give an even shade including cost, conveyance, royalities of materials, labour, T&P, required for the work etc. all complete
201.73
-
136.65
Filling in foundation & plinth with excavated materials including watering and ramming as directed by the engineer-in-charge.
4.05
-
113.45
Providing and fixing ms fabricated gate to the boundary
45
-
70
Painting two coats with enamel paint over one coat of primer
0.9
-
193.01
Walkway and cover slab - Supply all materials, labour, T&P, Welding rods, gas etc. for fabricating and welding of different sizes of MS angles, joist channel, MS/G.I pipe, flat and sheets of 4mm thick as per the required site condition for covering the 5mtr dia RCC/ Masonary well with MS/G.I ralling, necessary precaution to prevent entry of foreign materials like leaves, earth and dust into the well, filling cavities & gaps with CC(1:2:4), finished smooth including painting two coats with approved enamel paint over a coat of redoxide primer to sheet, channel and ralling complete including GST & cess , as per the direction of Engineer-in-charge. a.MS Channel 100x50x50x6 mm
257.6
-
67
b. MS Angel 50x50x6
266
-
70
C. MS Angel 25x25x6
40.5
-
70
d. Flat 6mm thick
25.14
-
70
e.2.5mm thick plate covering
491.79
-
75
Providing and Laying fabricated G.I pipes and specials as dimentionaly mentioned in proper position / alignment as directed by the concern Engineer in charge including cost, conveyance, loading, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main/distrubution system, welding on automatic welding machine including cost of all materials, labour, T&P consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. A. Stand
11
-
1086.14
b. Railing with 40mm G.I pipe
51
-
504.49
Painting two coats with any approved enamel paints over a coat of redoxide primer including cost of all materials and labour charges etc. complete.
23.84
-
193.01
Operation & maintainance for 5 years @ 1% per year
5
-
38118.85
PWS Scheme to village Patta - PROCUREMENT OF SUBMERSIBLE PUMP INCLUIDING COST OF LOWERING.Supplying of Vertical / Open well submersible pump set in multistage construction with radial or mixed flow impellers coupeled with totaly enclosed water filled squirrel cage induction motor to operate at 2850rpm rated voltage 380-415 volt 50 Hz AC SINGLE /3phase power supply capable of discharging as noted below of any reputed make like KSB/CROMPTON/CRI/Kirloskar confirming to relevant IS specification IS 14220 for installing in RCC intake well /Percolation well.Vertical submersible pump 2 HP of 2 Nos.
2
-
15980.45
ACCESSORIES Supplying of 3 phase star delta controll pannel suitable for above submersible pump fitted with voltameter ,Ampermeter, selector, switch, main switch, fuse indicator ,connector,on/of switch with strater component with over load protection and single phasepreventor enclosed in a sheet steel encloser of any reputed make ( like BCH /switch and gear /L&T /Havells)
2
-
4000
ii) Procurement of submersible 4 sqmm flat cable of reputed make.
50
-
95.52
iii) Procurement of GI/GI column pipe of required dia (3mtr length) including fitting and fixture. a.40 mm dia
5
-
504.49
b. 40mm dia flanges
5
-
207.14
c. 40mm flange joint
4
-
136.26
d. 4 mm² PVC insulated wire rope with clamp
10
-
35
Installation of pumping set into Open well/Tubewell including fitting fixing of electrical accessories such as main switch, control pannel unit including jointing, lowering of column pipe & cable and incluiding bore clamp, bore cap etc as required complete.
1
-
4443
Storage reservoir - Designing, Testing and commissioning of R.C.C 20KL OGR with suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc. including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the OGR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
353550
Treatment unit - Providing chlorination arrangement of required capacity with agitator, Dosing Pump as per approved design including cost and installation of all materials, pipes, fittings, valves etc all complete.
1
-
40000
Rising main and Distribution system - Providing and laying fabricated G.I pipes of TATA/Jindal make and specials as dimentionally mentioned in proper position / alignment as directed by the concern Engineer in charge including conveyance from stores to site of work, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main / distribution system, welding on automatic welding machine including cost of all materials, labour, T&P , consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. a.65 mm dia G.I. Pipe (Medium class)
20
-
857.1
Earth in excavation intrenches for laying of pipe lines in all kinds of soil including dressing and levelling the bed of foundation, braeking clods and depositing the excavated soil with initial lead of 50m and initial lift of 1.5m as per direction of engineer in charge
1460.63
-
204.22
Refilling the pipe line trenches with the excavated earth including watering and raming as directed by the Engineer -in -charge.
1443.41
-
113.45
Supplying all labour, T&P for cutting CC road for laying of PVC pipe
3.38
-
585.4
Supplying all labour, T&P for C.C.(1:2:4) with 12mm size hard granite chips and mending good the damages of C.C. Road for laying of PVC Pipe line with all complete
3.38
-
5750.44
Cutting metal road for taking pipe line and making good to the damages
60
-
311.94
Laying in trenches HDPE pipes confirming toIS 4984-1995 and specials of following out following outside diameter and Class-1 to Class-3 and jointing by Fusion welding methed inluding testing as per specification complete. a.75mm dia High Density Polyethylene Pipe PN 6.0
3895
-
249.52
Providing and fixing cast iron sluice valve with double flanged ends for water works purposes for the following rating (ISI 14846-2000) and subsequent ammendment if any) and nominal dia meter ( including the cost of all materials) and as per specification complete.a.50 mm Dia
5
-
3734.92
Providing and fixing swing check type reflux valves (Non returns valve) with double flanged ends for water works purposes for the following rating (1.6MPA confirming to IS 5312-1984 and sebsequent ammendment if any ) and nominal diameter ( including the cost of all materials) as per specification complete.a.50 mm Dia
2
-
3340.01
Providing and fixing 15mm to 25mm dia single Air valve for water works purposes for the following dia meter including drilling the water main (including all cost of materials) as per specification complete. a.15mm dia
2
-
1892.85
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate non-return valves and sluice valves as per PH specification complete.
7
-
13239
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate Air valves as per PH specification complete.
1
-
10637
INDIVIDUAL HOUSE HOLD WATER SUPPLY CONNECTION BY TAP Supplying all materials labour T&P for fitting and fixing of metal or PVC febricated shadle with suitable o ring, nuts and bolts etc with 1/8'' inch dia GM ferrule cock ,required 15mm to 20mm dia GI fittings,20mm dia GI pipe of 1.00 mtr length , making concrete block with 110mm OD PVC pipe of required length for stand point ,cutting hole through brick/ stone masonary wall with necessary earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
60
-
1892
Supplying all materials labour T&P for laying of 20mm dia HDPE pipe (PE-80,PN -10) incluiding earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
300
-
71.4
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages
60
-
92
Construction of Display Board (1.5M. X 1.5M.)
1
-
4549
Pump Chamber of size 3mtr X 3mtr inside dimension - Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
12.42
-
204.22
Sand filling in foundation and plinth well watered and rammed including cost carriage and royalty(Sand filling at headworks site 120+ Pump Chamber site 5.35)
125.35
-
382.56
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
2.6
-
4056.65
Random rubble HG stone maonry in cement mortar (1:6) in foundation and plinth
7.9
-
3472.09
a.Fly Ash Brick masonry in CM (1:6) in foundation plinth including cost carriage royalty of all materials
0.82
-
4330.31
b. Fly Ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials
8.46
-
4363.64
Earth filling with excavated materials including watering and ramming etc all complete
3.36
-
113.45
Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete. a)R.C.C. Foundation, Plinth Bend
3.9
-
101.71
b) RCC Lintel
2.43
-
264.1
c)RCC Roof and chajja
15.77
-
429.25
RCC M20 with 12 mm size HG chips including hoisting lowering and laying the concrete including cost carriage royalty of all materials
2.61
-
5368.24
2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials
14.44
-
308.7
Cutting bending binding and tying the MS grills and placing in position including cost and carriage of MS rod and cost of binding wire including carriage of all materials
2.35
-
8450.76
12mm thick cement plaster (1:4) over brick masonry work including cement punning and bituminus painting over top of wall including cost carriage and royality of all materials
3.25
-
207.5
12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials
93.18
-
145.11
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete.
11.95
-
300.21
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips including cost carriage royalty of all materials etc all complete
4.05
-
318.9
Supplying all materials labour T&P and providing Weather coat to new plastered surface including transportation charges taxes etc all complete
93.18
-
136.65
Supplying all materials labour T&P and finishing walls with Plastic emulsion paint of approved shade with two coats to give an even shade including cost of paint and carriage charges etc all complete.
93.18
-
88.17
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )
90
-
75
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 4.50 kg / sqft )
73.5
-
70
Supplying all materials labour T&P and providing 5 cm thick RCC Shelf in cc(1:2:4) with CB HG Chips 12 mm size fitted and fixed in position finished smooth complete with all materials etc all complete
73.5
-
75
Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete
9.68
-
137.93
Fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials.
11.95
-
965.1
Fixing tiles in dados, skirting and risers of steps on 12mm cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.
5.5
-
1069.46
Providing & Fixing CHEQURED TILES in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.
15.21
-
499.59
Internal Electrification - Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge.
10
-
170
Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge.
2
-
165
Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required
7
-
32
Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. 32 Amp D.P.main switch with porcelain base
1
-
951
Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.63 Amp TPN Main switch
1
-
3506
Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
1555
Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
85
Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required.(a) 250mmx200mmx75mm
1
-
160
(b) 180mmx100mmx60mm
1
-
84
Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required a. 4x10 sqmm + 2x6 sqmm
5
-
460
b.3x10 sqmm + 1x6 sqmm
5
-
335
c.2x4 sqmm + 1x2.5 sqmm
2
-
125
d.2x2.5 sqmm + 1x1.5 sqmm
5
-
95
e.3x1.5 sqmm + 1x1.5 sqmm
2.5
-
90
Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction fo the Engineer in charge.a.Short point
2
-
330
b.Medium point
1
-
430
c.Long point
1
-
550
Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge.
2
-
435
Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. A.5 / 6 Amp one way switch (Piano type)
5
-
21
B.3 Pin 5/6 socket outlet (piano tytpe)
1
-
34
Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required.
15
-
58
Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required
0.3
-
530
Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc with charcoal and salt as required.
1
-
1875
Boundary Wall for 60 mtr - Earth work in hard soil and gravelley soil within 50m, initial lead and 1.5, initial lift including rough dressing and breaking clods to maximum 5 cm to7 cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge.
33.75
-
188.79
Filling in plinth with selected sand in the areas within initial lead & lift, including cost of materials, labours, T&P etc. complete.
6.75
-
382.56
Providing & laying cement concrete of proportion ( 1:4:8 )of 40mm downgraded stone aggregate of specified thickness for foundations below walls, column footings at any depth below floors etc. including centering, shuttering if required laying spreading, ramming, and curing etc.complete including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer-in-charge.
6.75
-
4056.65
Providing and constructing Random rubble H.G. stone masonry at foundation in cement mortar 1:6 including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer-in-charge.
24.3
-
3472.09
2.5cm Dam proof course (DPC) with CC (1:2:4) using 12mm size CBHG chips including cost, conveyance, royality, of all materials etc. complete as per direction of Engineer-in-charge.
27
-
297.57
Providing and constructing Brick masonry at all floors and locations using best approved quality flyash bricks from local available using in cement mortar 1:6 to correct line, level & plumb, including, scaffolding, watering, curing, recking out joints etc. including cost of all materials, labour, transportation etc. complete as per direction of engineer-in-charge.
20.17
-
4330.31
Providing and applying cement plaster 16mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P , curing etc. complete as direction of Engineer-in-charge.
100.87
-
205.52
Providing and applying cement plaster 12mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P , curing etc. complete as direction of Engineer-in-charge.
100.87
-
145.11
Finishing wall with weather coat two coats of approved shade on new plastered surface to give an even shade including cost, conveyance, royalities of materials, labour, T&P, required for the work etc. all complete
201.73
-
136.65
Filling in foundation & plinth with excavated materials including watering and ramming as directed by the engineer-in-charge.
4.05
-
113.45
Providing and fixing ms fabricated gate to the boundary
45
-
70
Painting two coats with enamel paint over one coat of primer
0.9
-
193.01
Walkway and cover slab - Supply all materials, labour, T&P, Welding rods, gas etc. for fabricating and welding of different sizes of MS angles, joist channel, MS/G.I pipe, flat and sheets of 4mm thick as per the required site condition for covering the 5mtr dia RCC/ Masonary well with MS/G.I ralling, necessary precaution to prevent entry of foreign materials like leaves, earth and dust into the well, filling cavities & gaps with CC(1:2:4), finished smooth including painting two coats with approved enamel paint over a coat of redoxide primer to sheet, channel and ralling complete including GST & cess , as per the direction of Engineer-in-charge. a.MS Channel 100x50x50x6 mm
257.6
-
67
b. MS Angel 50x50x6
266
-
70
C. MS Angel 25x25x6
40.5
-
70
d. Flat 6mm thick
25.14
-
70
e.2.5mm thick plate covering
491.79
-
75
Providing and Laying fabricated G.I pipes and specials as dimentionaly mentioned in proper position / alignment as directed by the concern Engineer in charge including cost, conveyance, loading, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main/distrubution system, welding on automatic welding machine including cost of all materials, labour, T&P consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. A. Stand
11
-
1086.14
b. Railing with 40mm G.I pipe
51
-
504.49
Painting two coats with any approved enamel paints over a coat of redoxide primer including cost of all materials and labour charges etc. complete.
23.84
-
193.01
Operation & maintainance for 5 years @ 1% per year
5
-
28965.52
PWS Scheme to village Gadadi - PROCUREMENT OF SUBMERSIBLE PUMP INCLUIDING COST OF LOWERING.Supplying of Vertical / Open well submersible pump set in multistage construction with radial or mixed flow impellers coupeled with totaly enclosed water filled squirrel cage induction motor to operate at 2850rpm rated voltage 380-415 volt 50 Hz AC SINGLE /3phase power supply capable of discharging as noted below of any reputed make like KSB/CROMPTON/CRI/Kirloskar confirming to relevant IS specification IS 14220 for installing in RCC intake well /Percolation well.Vertical submersible pump 2 HP of 2 Nos.
2
-
15980.45
ACCESSORIES Supplying of 3 phase star delta controll pannel suitable for above submersible pump fitted with voltameter ,Ampermeter, selector, switch, main switch, fuse indicator ,connector,on/of switch with strater component with over load protection and single phasepreventor enclosed in a sheet steel encloser of any reputed make ( like BCH /switch and gear /L&T /Havells)
2
-
4000
ii) Procurement of submersible 4 sqmm flat cable of reputed make.
50
-
95.52
iii) Procurement of GI/GI column pipe of required dia (3mtr length) including fitting and fixture. a.40 mm dia
5
-
504.49
b. 40mm dia flanges
5
-
207.14
c. 40mm flange joint
4
-
136.26
d. 4 mm² PVC insulated wire rope with clamp
10
-
35
Installation of pumping set into Open well/Tubewell including fitting fixing of electrical accessories such as main switch, control pannel unit including jointing, lowering of column pipe & cable and incluiding bore clamp, bore cap etc as required complete.
1
-
4443
Storage reservoir - Designing, Testing and commissioning of R.C.C 20KL OGR with suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc. including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the OGR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
353550
Treatment unit - Providing chlorination arrangement of required capacity with agitator, Dosing Pump as per approved design including cost and installation of all materials, pipes, fittings, valves etc all complete.
1
-
40000
Distribution system - Earth in excavation intrenches for laying of pipe lines in all kinds of soil including dressing and levelling the bed of foundation, braeking clods and depositing the excavated soil with initial lead of 50m and initial lift of 1.5m as per direction of engineer in charge
990
-
204.22
Refilling the pipe line trenches with the excavated earth including watering and raming as directed by the Engineer -in -charge.
978.33
-
113.45
Laying in trenches HDPE pipes confirming toIS 4984-1995 and specials of following out following outside diameter and Class-1 to Class-3 and jointing by Fusion welding methed inluding testing as per specification complete. a.75mm dia High Density Polyethylene Pipe PN 6.0
2640
-
249.52
Providing and fixing cast iron sluice valve with double flanged ends for water works purposes for the following rating (ISI 14846-2000) and subsequent ammendment if any) and nominal dia meter ( including the cost of all materials) and as per specification complete.a.50 mm Dia
2
-
3734.92
Providing and fixing swing check type reflux valves (Non returns valve) with double flanged ends for water works purposes for the following rating (1.6MPA confirming to IS 5312-1984 and sebsequent ammendment if any ) and nominal diameter ( including the cost of all materials) as per specification complete.a.50 mm Dia
2
-
3340.01
Providing and fixing 15mm to 25mm dia single Air valve for water works purposes for the following dia meter including drilling the water main (including all cost of materials) as per specification complete. a.15mm dia
2
-
1892.85
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate non-return valves and sluice valves as per PH specification complete.
4
-
13239
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate Air valves as per PH specification complete.
1
-
10637
INDIVIDUAL HOUSE HOLD WATER SUPPLY CONNECTION BY TAP Supplying all materials labour T&P for fitting and fixing of metal or PVC febricated shadle with suitable o ring, nuts and bolts etc with 1/8'' inch dia GM ferrule cock ,required 15mm to 20mm dia GI fittings,20mm dia GI pipe of 1.00 mtr length , making concrete block with 110mm OD PVC pipe of required length for stand point ,cutting hole through brick/ stone masonary wall with necessary earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
22
-
1892
Supplying all materials labour T&P for laying of 20mm dia HDPE pipe (PE-80,PN -10) incluiding earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
110
-
71.4
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages
22
-
92
Construction of Display Board (1.5M. X 1.5M.)
1
-
4549
Pump Chamber of size 3mtr X 3mtr inside dimension - Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
12.42
-
204.22
Sand filling in foundation and plinth well watered and rammed including cost carriage and royalty
5.35
-
382.56
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
2.6
-
4056.65
Random rubble HG stone maonry in cement mortar (1:6) in foundation and plinth
7.9
-
3472.09
a.Fly Ash Brick masonry in CM (1:6) in foundation plinth including cost carriage royalty of all materials
0.82
-
4330.31
b. Fly Ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials
8.46
-
4363.64
Earth filling with excavated materials including watering and ramming etc all complete
3.36
-
113.45
Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete. a)R.C.C. Foundation, Plinth Bend
3.9
-
101.71
b) RCC Lintel
2.43
-
264.1
c)RCC Roof and chajja
15.77
-
429.25
RCC M20 with 12 mm size HG chips including hoisting lowering and laying the concrete including cost carriage royalty of all materials
2.61
-
5368.24
2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials
14.44
-
308.7
Cutting bending binding and tying the MS grills and placing in position including cost and carriage of MS rod and cost of binding wire including carriage of all materials
2.35
-
8450.76
12mm thick cement plaster (1:4) over brick masonry work including cement punning and bituminus painting over top of wall including cost carriage and royality of all materials
3.25
-
207.5
12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials
93.18
-
145.11
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete.
11.95
-
300.21
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips including cost carriage royalty of all materials etc all complete
4.05
-
318.9
Supplying all materials labour T&P and providing Weather coat to new plastered surface including transportation charges taxes etc all complete
93.18
-
136.65
Supplying all materials labour T&P and finishing walls with Plastic emulsion paint of approved shade with two coats to give an even shade including cost of paint and carriage charges etc all complete.
93.18
-
88.17
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )
90
-
75
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 4.50 kg / sqft )
73.5
-
70
Supplying all materials labour T&P and providing 5 cm thick RCC Shelf in cc(1:2:4) with CB HG Chips 12 mm size fitted and fixed in position finished smooth complete with all materials etc all complete
73.5
-
75
Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete
9.68
-
137.93
Fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials.
11.95
-
965.1
Fixing tiles in dados, skirting and risers of steps on 12mm cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.
5.5
-
1069.46
Providing & Fixing CHEQURED TILES in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.
15.21
-
499.59
Internal Electrification - Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge.
10
-
170
Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge.
2
-
165
Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required
7
-
32
Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. 32 Amp D.P.main switch with porcelain base
1
-
951
Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.63 Amp TPN Main switch
1
-
3506
Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
1555
Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
85
Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required.(a) 250mmx200mmx75mm
1
-
160
(b) 180mmx100mmx60mm
1
-
84
Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required a. 4x10 sqmm + 2x6 sqmm
5
-
460
b.3x10 sqmm + 1x6 sqmm
5
-
335
c.2x4 sqmm + 1x2.5 sqmm
2
-
125
d.2x2.5 sqmm + 1x1.5 sqmm
5
-
95
e.3x1.5 sqmm + 1x1.5 sqmm
2.5
-
90
Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction fo the Engineer in charge.a.Short point
2
-
330
b.Medium point
1
-
430
c.Long point
1
-
550
Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge.
2
-
435
Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. A.5 / 6 Amp one way switch (Piano type)
5
-
21
B.3 Pin 5/6 socket outlet (piano tytpe)
1
-
34
Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required.
15
-
58
Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required
0.3
-
530
Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc with charcoal and salt as required.
1
-
1875
Walkway and cover slab - Supply all materials, labour, T&P, Welding rods, gas etc. for fabricating and welding of different sizes of MS angles, joist channel, MS/G.I pipe, flat and sheets of 4mm thick as per the required site condition for covering the 5mtr dia RCC/ Masonary well with MS/G.I ralling, necessary precaution to prevent entry of foreign materials like leaves, earth and dust into the well, filling cavities & gaps with CC(1:2:4), finished smooth including painting two coats with approved enamel paint over a coat of redoxide primer to sheet, channel and ralling complete including GST & cess , as per the direction of Engineer-in-charge. a.MS Channel 100x50x50x6 mm
257.6
-
67
b. MS Angel 50x50x6
266
-
70
C. MS Angel 25x25x6
40.5
-
70
d. Flat 6mm thick
25.14
-
70
e.2.5mm thick plate covering
491.79
-
75
Providing and Laying fabricated G.I pipes and specials as dimentionaly mentioned in proper position / alignment as directed by the concern Engineer in charge including cost, conveyance, loading, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main/distrubution system, welding on automatic welding machine including cost of all materials, labour, T&P consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. A. Stand
11
-
1086.14
b. Railing with 40mm G.I pipe
51
-
504.49
Painting two coats with any approved enamel paints over a coat of redoxide primer including cost of all materials and labour charges etc. complete.
23.84
-
193.01
Operation & maintainance for 5 years @ 1% per year
5
-
19086.98
PWS Scheme to village Mundabadi - PROCUREMENT OF SUBMERSIBLE PUMP INCLUIDING COST OF LOWERING.Supplying of Vertical / Open well submersible pump set in multistage construction with radial or mixed flow impellers coupeled with totaly enclosed water filled squirrel cage induction motor to operate at 2850rpm rated voltage 380-415 volt 50 Hz AC SINGLE /3phase power supply capable of discharging as noted below of any reputed make like KSB/CROMPTON/CRI/Kirloskar confirming to relevant IS specification IS 14220 for installing in RCC intake well /Percolation well.Vertical submersible pump 3 HP of 2 Nos.
2
-
16551.07
ACCESSORIES Supplying of 3 phase star delta controll pannel suitable for above submersible pump fitted with voltameter ,Ampermeter, selector, switch, main switch, fuse indicator ,connector,on/of switch with strater component with over load protection and single phasepreventor enclosed in a sheet steel encloser of any reputed make ( like BCH /switch and gear /L&T /Havells)
2
-
4000
ii) Procurement of submersible 4 sqmm flat cable of reputed make.
50
-
95.52
iii) Procurement of GI/GI column pipe of required dia (3mtr length) including fitting and fixture. a.40 mm dia
5
-
504.49
b. 40mm dia flanges
5
-
207.14
c. 40mm flange joint
4
-
136.26
d. 4 mm² PVC insulated wire rope with clamp
10
-
35
Installation of pumping set into Open well/Tubewell including fitting fixing of electrical accessories such as main switch, control pannel unit including jointing, lowering of column pipe & cable and incluiding bore clamp, bore cap etc as required complete.
1
-
4443
Storage reservoir - Designing, Testing and commissioning of R.C.C 20KL OGR with suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc. including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the OGR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
353550
Treatment unit - Providing chlorination arrangement of required capacity with agitator, Dosing Pump as per approved design including cost and installation of all materials, pipes, fittings, valves etc all complete.
1
-
40000
Distribution system - Earth in excavation intrenches for laying of pipe lines in all kinds of soil including dressing and levelling the bed of foundation, braeking clods and depositing the excavated soil with initial lead of 50m and initial lift of 1.5m as per direction of engineer in charge
708.75
-
204.22
Refilling the pipe line trenches with the excavated earth including watering and raming as directed by the Engineer -in -charge.
700.4
-
113.45
Laying in trenches HDPE pipes confirming toIS 4984-1995 and specials of following out following outside diameter and Class-1 to Class-3 and jointing by Fusion welding methed inluding testing as per specification complete. a.75mm dia High Density Polyethylene Pipe PN 6.0
1890
-
249.52
Providing and fixing cast iron sluice valve with double flanged ends for water works purposes for the following rating (ISI 14846-2000) and subsequent ammendment if any) and nominal dia meter ( including the cost of all materials) and as per specification complete.a.50 mm Dia
5
-
3734.92
Providing and fixing swing check type reflux valves (Non returns valve) with double flanged ends for water works purposes for the following rating (1.6MPA confirming to IS 5312-1984 and sebsequent ammendment if any ) and nominal diameter ( including the cost of all materials) as per specification complete.a.50 mm Dia
2
-
3340.01
Providing and fixing 15mm to 25mm dia single Air valve for water works purposes for the following dia meter including drilling the water main (including all cost of materials) as per specification complete. a.15mm dia
2
-
1892.85
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate non-return valves and sluice valves as per PH specification complete.
7
-
13239
Supplying all materials, labour, T & P for constructing R.C.C chambers to accommodate Air valves as per PH specification complete.
2
-
10637
INDIVIDUAL HOUSE HOLD WATER SUPPLY CONNECTION BY TAP Supplying all materials labour T&P for fitting and fixing of metal or PVC febricated shadle with suitable o ring, nuts and bolts etc with 1/8'' inch dia GM ferrule cock ,required 15mm to 20mm dia GI fittings,20mm dia GI pipe of 1.00 mtr length , making concrete block with 110mm OD PVC pipe of required length for stand point ,cutting hole through brick/ stone masonary wall with necessary earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
42
-
1892
Supplying all materials labour T&P for laying of 20mm dia HDPE pipe (PE-80,PN -10) incluiding earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
210
-
71.4
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages
42
-
92
Construction of Display Board (1.5M. X 1.5M.)
1
-
4549
Pump Chamber of size 3mtr X 3mtr inside dimension - Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
12.42
-
204.22
Sand filling in foundation and plinth well watered and rammed including cost carriage and royalty
5.35
-
382.56
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
2.6
-
4056.65
Random rubble HG stone maonry in cement mortar (1:6) in foundation and plinth
7.9
-
3472.09
a.Fly Ash Brick masonry in CM (1:6) in foundation plinth including cost carriage royalty of all materials
0.82
-
4330.31
b. Fly Ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials
8.46
-
4363.64
Earth filling with excavated materials including watering and ramming etc all complete
3.36
-
113.45
Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete. a)R.C.C. Foundation, Plinth Bend
3.9
-
101.71
b) RCC Lintel
2.43
-
264.1
c)RCC Roof and chajja
15.77
-
429.25
RCC M20 with 12 mm size HG chips including hoisting lowering and laying the concrete including cost carriage royalty of all materials
2.61
-
5368.24
2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials
14.44
-
308.7
Cutting bending binding and tying the MS grills and placing in position including cost and carriage of MS rod and cost of binding wire including carriage of all materials
2.35
-
8450.76
12mm thick cement plaster (1:4) over brick masonry work including cement punning and bituminus painting over top of wall including cost carriage and royality of all materials
3.25
-
207.5
12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials
93.18
-
145.11
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete.
11.95
-
300.21
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips including cost carriage royalty of all materials etc all complete
4.05
-
318.9
Supplying all materials labour T&P and providing Weather coat to new plastered surface including transportation charges taxes etc all complete
93.18
-
136.65
Supplying all materials labour T&P and finishing walls with Plastic emulsion paint of approved shade with two coats to give an even shade including cost of paint and carriage charges etc all complete.
93.18
-
88.17
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )
90
-
75
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 4.50 kg / sqft )
73.5
-
70
Supplying all materials labour T&P and providing 5 cm thick RCC Shelf in cc(1:2:4) with CB HG Chips 12 mm size fitted and fixed in position finished smooth complete with all materials etc all complete
73.5
-
75
Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete
9.68
-
137.93
Fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials.
11.95
-
965.1
Fixing tiles in dados, skirting and risers of steps on 12mm cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.
5.5
-
1069.46
Providing & Fixing CHEQURED TILES in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.
15.21
-
499.59
Internal Electrification - Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge.
10
-
170
Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge.
2
-
165
Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required
7
-
32
Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. 32 Amp D.P.main switch with porcelain base
1
-
951
Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.63 Amp TPN Main switch
1
-
3506
Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
1555
Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
85
Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required.(a) 250mmx200mmx75mm
1
-
160
(b) 180mmx100mmx60mm
1
-
84
Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required a. 4x10 sqmm + 2x6 sqmm
5
-
460
b.3x10 sqmm + 1x6 sqmm
5
-
335
c.2x4 sqmm + 1x2.5 sqmm
2
-
125
d.2x2.5 sqmm + 1x1.5 sqmm
5
-
95
e.3x1.5 sqmm + 1x1.5 sqmm
2.5
-
90
Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction fo the Engineer in charge.a.Short point
2
-
330
b.Medium point
1
-
430
c.Long point
1
-
550
Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge.
2
-
435
Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. A.5 / 6 Amp one way switch (Piano type)
5
-
21
B.3 Pin 5/6 socket outlet (piano tytpe)
1
-
34
Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required.
15
-
58
Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required
0.3
-
530
Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc with charcoal and salt as required.
1
-
1875
Walkway and cover slab - Supply all materials, labour, T&P, Welding rods, gas etc. for fabricating and welding of different sizes of MS angles, joist channel, MS/G.I pipe, flat and sheets of 4mm thick as per the required site condition for covering the 5mtr dia RCC/ Masonary well with MS/G.I ralling, necessary precaution to prevent entry of foreign materials like leaves, earth and dust into the well, filling cavities & gaps with CC(1:2:4), finished smooth including painting two coats with approved enamel paint over a coat of redoxide primer to sheet, channel and ralling complete including GST & cess , as per the direction of Engineer-in-charge. a.MS Channel 100x50x50x6 mm
257.6
-
67
b. MS Angel 50x50x6
266
-
70
C. MS Angel 25x25x6
40.5
-
70
d. Flat 6mm thick
25.14
-
70
e.2.5mm thick plate covering
491.79
-
75
Providing and Laying fabricated G.I pipes and specials as dimentionaly mentioned in proper position / alignment as directed by the concern Engineer in charge including cost, conveyance, loading, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main/distrubution system, welding on automatic welding machine including cost of all materials, labour, T&P consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. A. Stand
11
-
1086.14
b. Railing with 40mm G.I pipe
51
-
504.49
Painting two coats with any approved enamel paints over a coat of redoxide primer including cost of all materials and labour charges etc. complete.
23.84
-
193.01
Operation & maintainance for 5 years @ 1% per year
5
-
17421.1
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements