Rural Water Supply And Sanitation Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Rural Water Supply And Sanitation Department - RWSS Tender
Civil And Construction
Excavation
Eprocure
Opening Date20 Jun 2022
Closing Date5 Jul 2022
Tender Amount₹ 3,39,44,297
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Execution Of 40 Lpcd Retrofitting Rpws Scheme To Parakula Andjamapada On Clubbed Up Mode Under Marshaghai Block In The District Of Kendrapara
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_RWSS_78658_1Bid Award Id
ViewTender No
RWS /103/2021-22Tender Authority
Rural Water Supply And Sanitation Department ViewPurchaser Address
-Website
http://tendersodisha.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supplying all labour T&P for PCC (1:4:8) using 4 CM size black hard granite metal crosser broken including all cost, carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
3.6
-
4502.8
Supplying all materials labour T&P for cement concrete (1:2:4) using 20mm to 12 mm size hard granite crusher broken chips including cost of all materials, carriages, royalty including hoisting and laying and curing etc. all complete as per the direction of Engineer-in-Charge.
2.52
-
6320.9
Supplying of all labour,T&P,material including taxes for construction of brick masonry production well platform all complete as per direction of the Engineer - in Charge.
1
-
21199.4
Pump & motor & Accessories
-
-
-
Supply errection, testing & commissioning of vertical submersible pump coupled with electric driven 6.0 HP motor having discharge of 6.09 LPS & 48 mtr to run in three phase line voltage rating 330 volt to 440 volt confirming to relevant IS specification of reputed make of KSB/Crompton/CRI/Texmo etc with suitable control panel for submersible pump set three phase consisting C.R.C.A sheet with powder coating both side the box and proper locking system contactor, volt meter, ampere meter weather proof, auto manual switch, volt meter with shunt capacitor selector switch indicating light ON & OFF of switch (B.C.H & L&T Make) with 6mm2 copper conductor with PVC insulating flat submersible cable suitable for above pump sets reputed make of cable (B.C.H, Finolex & Havells make) with installation charges at site.
-
-
-
Submersible Pump set -6.0 H P,DischArge-6.09 LPS, Head -48 mtr
1
-
31476
Supplying all material , labour & T&P for fitting and fixing of Panel board(9.5 A-13.5 A) asper direction of E-I-C.
1
-
7200
Supplying all material , labour & T&P for fitting and fixing of 6 sqmmcable asper direction of E-I-C.
60
-
115
35 mm round armoured cable
30
-
175
Brass pressure gauge of 10 kgf/cm2
1
-
900
80 mm GI Medium grade flanged column pipe 3 mtr long each
8
-
2500
80 mm GI Medium grade flanged column pipe 3 ' long each
1
-
600
100 mm GI Medium grade GI pipe for Tripod 3 nos of each 6 mtr long
18
-
659
80 mm GI clamp to hold column pipe
1
-
425
200 mm dia GI fabricated Production well cover
1
-
850
GI Nut & Bolt
10
-
80
6 mm thick Rubber insertion
10
-
70
Stainless Steel Rope
60
-
50
Supplying all labour ,materials T & P for lifting , lowering & transporatation of pump & motor
1
-
4000
16 mm dia ASTM PVC Pipe for pressure gauge connection
10
-
38.15
32 mm HDPE pipe
10
-
40
LAYING OF PIPELINE
-
-
-
Supplying all materials,labour,T & P and doing earth work in excavation of pipe line trenches in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift in foundation trenches including dressing & leveling the bed etc all complete as per direction of the EIC.
621.98
-
180.23
Supplying all labour,material, T&P and laying in trenches HDPE pipes & specials of the following outside diameter for all classes and jointing by fusion welding method including testing as per direction by the Engineer in Charge.(Including transportation charges)
-
-
-
160mm HDPE Pipe PN6 PE-80
460
-
1001.6
90mm HDPE Pipe PN6 PE-80
1030
-
360.1
Supplying all materials, labour, T&P fabrication and laying of G.I. Pipes, TATA/Bansal/Jindal(medium pipes) confirming I.S 1239(P-1) 2004, I.S.- 1978, I.S.-3598 specification of required size and length including earthwork and refilling. THE GI pipes should be of BIS specification having thickness of 4mm to 5.5mm
-
-
-
150mm dia G.I pipe
40
-
1501
80mm dia G.I pipe
80
-
659
150mm dia G.I bend
4
-
1966
80mm dia G.I bend
4
-
562
150mm dia GI flange
6
-
431
80mm dia GI flange
6
-
243
5/8" thick nut & bolt
10
-
80
4mm thick rubber insertion
10
-
70
Filling of pipe line trenches with excavated materials in all kind of soil laying in layer not exceeding 0.30m in depth well watered and rammed a directed by the Engineer-in-charge.
390.19
-
100.1
Supplying all labour, T&P and fixing C.I sluice valve/N.R. Valve/Air valve with double flanged ends for water works purpose of the following rating & nominal dia mtrs as per P.H specification complete excluding earth work for laying including cost of S.V,/N.R. Valve/Air valve , nuts, bolts & rubber insertion etc.all complete as per approved specification & direction of EIC.
-
-
-
80mm dia CIDF SV(IS:14846/2000)
2
-
4407.9
150mm dia CIDF SV(IS:14846/2000)
1
-
9366.59
25 mm dia AV(including cost of material)
1
-
1511.68
Supplying of all labour,T&P,material including taxes for construction of RCC valve chambers inside size 0.9x0.9x1.1m & wall thickness 0.15m confirming to approved drawing, design & specification etc. complete as per direction of the Engineer - in Charge.
3
-
16305
Supplying all materials, labour& T&P for construction of RCC single mouth stand post including earth work in all kinds of soil with initial lead and lift with cement concrete (1:2:4) with 12 mm size crusher broken Hard granite chips, reinforcement , plastering with CM(1:4) with punning including centering and shuttering etc all complete fitting and fixing of , GI fittings 20mm elbow 1no, 20x15mm dia GI R/S 1no, 20mm GI Union 1no, CI push cock/Bib cock 1no, PVC Saddle including transportation, taxes and royalties etc. all complete as per the direction of E.I.C. (As per drawing attached here with) including CC drain complete
2
-
9851
Supplying of all materials, labour and T&P and constructing RCC stand alone of 2000 litre capacity including fitting fixing all valves & fittings as per the direction of the Engineer in charge.connection including cost of EW pipe ,laying,saddle,ferrule,water meter & tap fittings etc standpost as per approved drawing and design etc all complete as per the direction of Engineer-in-Charge.
-
-
-
Supplying all labour,T&P for earth work in excavation in all kinds of soil including dressing and levelling the bed and depositing the soil with 50 Mtr. Initial lead and 1.5 mtr. Initial lift etc complete as per direction of Engineer-in-Charge.
1.6
-
180.24
Supplying all labour,T&P for filling in foundarion with sand including well watered and rammed with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.68
-
365.5
Supplying all labour,material,T&P for cement concrete (1:4:8) using 4 cm size hard granite crusher broken metal including watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.38
-
4502.8
Supplying all labour,material,T&P for cement concrete (1:2:4) using 12mm size hard granite crusher broken chips including watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.26
-
6320.9
Supplying all labour,material,T&P for K.B brick work in C.m (1:6) including watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
1.68
-
4528.6
Supplying all labour,material,T&P for cement concrete (1:11/2:3) using 12mm size hard granite crusher broken chips for R.C.C. work includinghoisting,laying, watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.71
-
7068.4
Supplying all material, labour,T&P for rigid & smooth centering and shuttering for RCC work imcluding false work and dismantling them after casting including cost of materials etc complete as per direction of Engineer-in-Charge.
15.15
-
753.9
Supplying all labour,T&P for fitting and placing uncoated HYSD bar reinforcement including cost, conveyance of materials etc complete as per drawing and technical specification and direction of Engineer-in-Charge.
0.43
-
10044.42
Supplying all material, labour,T&P for 12 mm thick cement plaster in cement mortar (1:4) for brick work using clean dry river sand including cost,conveyance and royalty of all materials etc complete as per direction of Engineer-in-Charge.
2.64
-
175
Supplying all material, labour,T&P for finishing walls with water proofing cement paint of approved shade on new work two coats to give an even shade including cost,conveyance and royalty of all materials etc complete as per direction of Engineer-in-Charge.
9.19
-
36.7
20 mm HDPE Pipe
10
-
48
20 mm GI Socket
1
-
20
20 mm PVC Ball Cock
1
-
120
20 mm GI Short piece
2
-
35
20 mm x 15 mm GI R/S
2
-
25
15 mm Bib Cock
2
-
112
PVC Saddle
1
-
120
25 mm GI Elbow
1
-
35
25 mm GI Shoprt piece
2
-
18
Cost of manhole cover
1
-
200
Construction of drain
3
-
284
Labour Charges for fitting & fixing of pipe line with all complete
1
-
520
Additional 1 stand alone excluding 1 above
1
-
35740.85
Supplying all labour,T&P,material including taxes for cutting Concrete roads for taking pipelines and making good to the damage and providing CC(1:2:4) of 45 cm width & 8cm depth using 12mm size c.b.h.g chips over cc(1:4:8) of 45 cm width & 15cm depth using 40cm c.b.hg metal over 0.77mtr depth of sand filling in trench etc. complete as per direction of the Engineer - in Charge.
380
-
733.59
Supplying of all labour,T&P,material including taxes for cutting metaled roads for taking pipelines and making good to the damages etc. complete as per direction of the Engineer - in Charge.
100
-
464
Providing functional house hold tap connection(FHTC)( as per letter no-2270/dated 03.02.2020 of PR and DW GoO
-
-
-
For FHTC on ferrule side
159
-
2237
for FHTC on opposite side of ferrule
119
-
2940
CHLORINATION ARRANGEMENT
-
-
-
Circular hopper bottom fibre tank supported with galvanized rod duly fixed over the ground through suitable foundation & nut & bolt having whole arrangement of bottom to remove the blaeching residuals fitted with power agitator to stir the solution and having suitable arrangement for decantation to another fibre covered container fitted with a suitable reciprocating dozing pump to fed the solution to the rising main after ESR carrying discharge of 6.59 lps at 39mtr head
1
-
57000
CONSTRUCTION OF ESR
-
-
-
Supplying of all labour,T&P,material and doing soil testing ,supply of design, drawing , construction, errection, testing & commissioning etc. of RCC elevated storage reservoir of required capacity staging height of 15 mtr consisting of 6/8 nos RCC columns &,bracings . Upto foundation(Pile foundation) using M-25 Concrete and super structure, spherical dome and container wall using R.C.C M-30 including plastering the inside & outside of the container tank and domes, painting of ESR with two coats of approved specific weather coat over one coat of primer, 2nos ISI marked 100/150mm dia CI sluice valve,2nos of 100/150mm dia D/F butter fly valve & it's RCC valve chambers as per approved drawing, supplying, fitting & fixing of CI in-let, out-let, over flow & washing line using double flanged 150mm& 100 mm dia CI column pipe not less than of 80 mtr length (150mm-20 mtr &100mm 60 mtr ) RCC stair case with 32mm dia stainless steel hand rail around top dome, Walk way around container, two sides of stairs and landing etc. , lightening arrester confirming to IS specification, digital water level indicator,100/150mm dia CI puddle collar, 2 nos of 0.6 m dia CI manhole cover at dome , RCC vent with brass jally , Sand filling (1 mtr ) around apron ,etc as per the site condition & construction of 1.0mtr wide CC apron around the ESR should be made by the contractor etc complete as per direction of the Engineer - in- Charge. (The contractor shall execute the work after preparing the design and detail drawing in 5 sets from qualified engineer and to approve all structural design & drawing from StateTechnical Agency(STA) IGIT,Saranga/ CET,BBSR/ VSSUI,Burla/ NIT,Rourkela/ IIT,BBSR at his own cost)
-
-
-
100000 ltr capacity RCC ESR with 15 mtr height staging pile foundation at PARAKULA ZONE-1
1
-
3300000
PARAKULA ZONE-2
-
-
-
Construction of compound wall
-
-
-
Earth work in excavation of foundation in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including dressing & levelling the bed etc all complete as per direction of the EIC.
57.28
-
180.24
Filling in foundation & plinth with sand with well watered and rammed including all cost, lead, royalities etc all complete as per direction of the Engineer-in-charge.
10.93
-
365.5
Supplying all materials,labour, T&P and providing Cement concrete (1:4:8) with 4cm size h.g.c.b metal including all cost, lead royalities & curing etc all complete as per direction of the Engineer-in-charge.
8.98
-
4502.8
RCC M20 with 20mm size crusher brocken hard granite Chips including cost, conveyance,royalities etc. all complete.
16.23
-
5210.4
Brick works with fly ash bricks (25cm x12cm x 8cm) having crushing strenth not less than 75kg/cm² in C.M.(1:6) in foudation & plinth including cost, conveyance, royalities of all materials etc. all complete.
-
-
-
1st footing
5.65
-
4495.3
Super Structure
28.97
-
4528.6
Rigid & smooth centering & shuttering for C.C. works including false work & dismantling them after casting including cost of materials complete
92.5
-
120.7
Supplying, fitting & placing uncoated HYSD bar reinfocement complete as per drawing and technical specification including cost, conveyance of all materials etc. all complete
12.99
-
10044.42
Supplying all materials, labour, T&P and providing Cement concrete(1:2:4) with 12 mm size HG chips including cost carriage royalty of all materials etc all complete.
1
-
6320.9
12mm Thick cement plaster over brick work outside
140.4
-
149.9
16 mm thick cement plaster (1:6) over brick work including cost, conveyance, royalities of all materials etc. complete
139.63
-
215.6
Priming 1 coat over cement plaster outside + inside
280.03
-
58
Finishing wall with water proofing cement paint two coats with any approved shade on old work to give on even shade excluding cost of paint.
280.03
-
36.7
Supplying all labour, materials and T&P for fitting & fixing of M.S. gate etc all complete.Gate-1no (2mx1.5m)=3 sqm. @ 40 kg
120
-
80
Painting 2 coats with any approved paint on new iron work including cost of all labours and materials etc.all complete.Gate-1no (2mx1.5m)=3 sqm.
3
-
148.3
SITE DEVELOPMENT & APPROACH ROAD
-
-
-
Supplying all labour T&P for filling foundation and plinth with sand well watered and rammed including all cost carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
132.6
-
365.5
Supplying all labour T&P for PCC (1:4:8) using 4 CM size black hard granite metal crosser broken including all cost, carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
3.6
-
4502.8
Supplying all materials labour T&P for cement concrete (1:2:4) using 20mm to 12 mm size hard granite crusher broken chips including cost of all materials, carriages, royalty including hoisting and laying and curing etc. all complete as per the direction of Engineer-in-Charge.
2.52
-
6320.9
Supplying of all labour,T&P,material including taxes for construction of brick masonry production well platform all complete as per direction of the Engineer - in Charge.
1
-
21199.4
Construction of pump house
-
-
-
Supplying all labour T&P for earth work in excavation in all kinds of soil within 50 Mtr. Initial lead and 1.5 Mtr. Initial lift including dressing and leveling the bed and site and breaking the clouds to maximum 5 CM to 7 CM and laying in layers not exceed 0.30 Mtr. in depth and as per the direction of Engineer-in-charge.
14.55
-
180.24
Supplying all labour T&P for filling foundation and plinth with sand well watered and rammed including all cost carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
9.73
-
365.5
Supplying all labour T&P for PCC (1:4:8) using 4 CM size black hard granite metal crosser broken including all cost, carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
2.98
-
4502.8
Supplying all materials labour T&P for KB brick masonry in cement mortal (1:6) in foundation and plinth including all cost, carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
4.98
-
4495.3
Supplying all materials labour T&P for RCC work (1:1/2:3) using 12 mm size hard granite crosser broken chips including cost of all materials, carriages, royalty including hoisting and laying and curing up to 3 weeks etc. all complete as per the direction of Engineer-in-Charge.
10.74
-
7068.4
Supplying all materials labour T&P for cutting, bending, binding, tying, fittings and placing on-coated HYSD bar reinforcement including cost of binding wire and MS rod according to the drawing and technical specification as per the direction of Engineer-in-charge
10.74
-
10044.42
Supplying all materials labour T&P for rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials, carriage etc. all complete as per the direction of Engineer-in-charge
-
-
-
Column Base
18.68
-
207.3
Column in S.S
45.24
-
207.3
RCC Lintel
8.27
-
381.03
Roof slab & Chajja
25.22
-
507
Supplying all materials labour T&P for KB brick masonry in cement mortal (1:6) in super structure including all cost, carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
15.46
-
4528.6
Supplying all materials labour T&P for 12 mm thick cement plaster in cement mortal (1:6) finished smooth including cost of all materials, carriage, royalty etc. all complete as per the direction of Engineer-in-charge (Outside)
65.5
-
156.3
Supplying all materials labour T&P for 16 mm thick cement plaster in cement mortal (1:6) finished smooth including cost of all materials, carriage, royalty etc. all complete as per the direction of Engineer-in-charge (Inside)
64.56
-
220.3
Supplying all materials labour T&P for 2.5 CM thick artificial stone flooring with cement concrete (1:2:4) including punning, using 12 mm size crosser broken hard broken chips including cost of all materials, carriage, royalty etc. all complete as per the
15.68
-
328.38
Supplying all materias ,labour T&P for making M.S doors and windows with supply of materials including fitting & fixing at site etc all complete as per the direction of Engineer-in-charge .
344.25
-
80
Supplying all labour T&P for painting 2 coats over a coat of a primer with any approved paint including cost of materials, brusses, putty etc. all complete as per the direction of Engineer-in-charge
14.88
-
187.8
Supplying all materials labour T&P for finishing wallsWall painting 2-coats with weather coat over one coat of primmer of approved shade on new work to give an even shade including cost of paint. etc. all complete as per the direction of Engineer-in-charge
130.06
-
180
Supplying all materials labour T&P for fitting and fixing of Orissa Pan including pipe line arangement etc. all complete as per the direction of Engineer-in-charge
1
-
1250
Supplying all materials labour T&P for fitting and fixing of 25 mm PVC pipe, fittings , tap etc. all complete as per the direction of Engineer-in-charge
1
-
1200
Supplying all materials labour T&P for fitting and fixing of RCC Ring overhead tank over the roof of pump house etc. all complete as per the direction of Engineer-in-charge
1
-
3000
Supplying all materials labour T&P for fitting and fixing of RCC Ring Soak Pit etc. all complete as per the direction of Engineer-in-charge
1
-
3000
Supplying all materials labour T&P for fitting and fixing of PVC door etc. all complete as per the direction of Engineer-in-charge
1
-
2000
Estimate For Internal Wiring To Pump House
-
-
-
P A R T - A
-
-
-
Concealed wiring to light point in Sqmm pvc single multistand cupper wire run inside the casing capping with continious running earth including cost of all materials & required labour charges and taxes materials
-
-
-
a) Short point
6
-
321
b) Medium point
1
-
503
c) Long point
1
-
744
Concealed wiring to Fan point in Sqmm pvc single core multistand cupper wire run inside the casing capping with 5 Amp.switch including cost of all materials,labour charges and taxes as applicable (Medium point) Concealed wiring to 3 pin 5 Amp.plug point in sqmm pvc single core multistand copper wire in exist, board with connection of running earth
1
-
570
Concealed wiring to 3 pin 5 Amp.plug point in sqmm pvc single core multistand copper wire in exist board with connection of running earth
1
-
62
S/F of back light Angle holder
2
-
30
S/F of 10 Amp. Fuse unit
1
-
54
S/F of indicator lamp
1
-
54
S/F of 16 Amp.KDP main switch of ISI make on casing board including cost of all materials and labour including all taxes applicable
1
-
410
P A R T - B
-
-
-
Supply of 100 Amp.415 volt KTPN main switch with fuse unit and neutral bar.The main switch to be fixed on M.S.Frame with nuts & bolts by drilling holes on M.S.Frame complete with all accessaries including cost of all materials and earthing connection.
1
-
3959
Supply fitting fixing of 1 No 4 pole 100Amp MCB Box of reputed make the inside wall of the pump house earthing
1
-
2449
Supply of 100 Amp.Kit Kat of good quality to be fixed inside the pump house.Concealed wiring of Motor point,pannel board from 100 Amp.Kit Kat,main switch by 7/18 pvc copper wire of I.S.I marked with the materials required as detailed below.
-
-
-
a)7/18 pvc single core copper wire
36
-
43
b) PVC flexible pipe
5
-
32
c) Flexible pipe saddle
20
-
2
d) No.10 earthing copper wire
4.5
-
508
e) Anchor bolt 4"
8
-
21
f) Nut bolt 1/4"
16
-
5
g) Nut bolt 3/16
12
-
3
h) 10 mm earthing socket
12
-
24
i) 10 mm Ring socket
12
-
16
j) 25 mm Ring socket
6
-
27
k) Nail of different sizes
0.3
-
54
l) 4 mm thick copper Bush bar plate 12" length
1
-
428
S & F of standard earthing confirming to I.S.3043/1987 including supply and fixing of 38mm / 40 mm dia heavy duty G.I. pipe 3 mtrs long confirming to IS 1239 Part-I/1990.The pipe shall have 12 mm dia perforted holes at 15 cm interval centre to centre up to 2.5 mtrs height from the bottom.Excavation of pit size of 0.75 mtrs x 3 mtrs.The earth pit shall have altenate layer of charcoal & salt around the electrode up to a depth of 465 mm from the bottom with fitting and fixing of copper plate of size 12"x12"x4 mm at bootom of the pipe with soldering complete with
-
-
-
No.10 copper wire bolted with copper plate.
2
-
2140
P A R T - C
-
-
-
BLEACHING PUMP WIRING
-
-
-
1.5 mm2P V C copper
15
-
21
P V C flexible pipe
3
-
32
P V C Saddle
10
-
2
Gutka
0.5
-
34
1" & 1.5" Screw
15
-
2
Earthing wire No.10 copper
0.3
-
508
8" x 10" casing board
1
-
86
P A R T - D
-
-
-
Labour charges for internal single phase and three phase electrical wiring
1
-
2400
Pump & motor & Accessories
-
-
-
Supply errection, testing & commissioning of vertical submersible pump coupled with electric driven 7.5 HP motor having discharge of 7.36 LPS & 48 mtr to run in three phase line voltage rating 330 volt to 440 volt confirming to relevant IS specification of reputed make of KSB/Crompton/CRI/Texmo etc with suitable control panel for submersible pump set three phase consisting C.R.C.A sheet with powder coating both side the box and proper locking system contactor, volt meter, ampere meter weather proof, auto manual switch, volt meter with shunt capacitor selector switch indicating light ON & OFF of switch (B.C.H & L&T Make) with 6mm2 copper conductor with PVC insulating flat submersible cable suitable for above pump sets reputed make of cable (B.C.H, Finolex & Havells make) with installation charges at site.
-
-
-
Submersible Pump set -7.5H P,DischArge-7.36 LPS, Head -48 mtr
2
-
35852
Supplying all material , labour & T&P for fitting and fixing of Panel board(9.5 A-13.5 A) asper direction of E-I-C.
1
-
7200
Supplying all material , labour & T&P for fitting and fixing of 6 sqmmcable asper direction of E-I-C.
60
-
115
35 mm round armoured cable
30
-
175
Brass pressure gauge of 10 kgf/cm2
1
-
900
80 mm GI Medium grade flanged column pipe 3 mtr long each
8
-
2500
80 mm GI Medium grade flanged column pipe 3 ' long each
1
-
600
100 mm GI Medium grade GI pipe for Tripod 3 nos of each 6 mtr long
18
-
659
80 mm GI clamp to hold column pipe
1
-
425
200 mm dia GI fabricated Production well cover
1
-
850
GI Nut & Bolt
10
-
80
6 mm thick Rubber insertion
10
-
70
Stainless Steel Rope
60
-
50
Supplying all labour ,materials T & P for lifting , lowering & transporatation of pump & motor
1
-
4000
16 mm dia ASTM PVC Pipe for pressure gauge connection
10
-
38.15
32 mm HDPE pipe
10
-
40
LAYING OF PIPELINE
-
-
-
Supplying all materials,labour,T & P and doing earth work in excavation of pipe line trenches in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift in foundation trenches including dressing & leveling the bed etc all complete as per direction of the EIC.
892.46
-
180.24
Supplying all labour,material, T&P and laying in trenches HDPE pipes & specials of the following outside diameter for all classes and jointing by fusion welding method including testing as per direction by the Engineer in Charge.(Including transportation charges)
-
-
-
160mm HDPE Pipe PN6 PE-80
510
-
1001.6
110mm HDPE Pipe PN6 PE-80
240
-
516.5
90mm HDPE Pipe PN6 PE-80
1410
-
360.1
Supplying all materials, labour, T&P fabrication and laying of G.I. Pipes, TATA/Bansal/Jindal(medium pipes) confirming I.S 1239(P-1) 2004, I.S.- 1978, I.S.-3598 specification of required size and length including earthwork and refilling. THE GI pipes should be of BIS specification having thickness of 4mm to 5.5mm
-
-
-
150mm dia G.I pipe
30
-
1501
100mm dia G.I pipe
30
-
952
80mm dia G.I pipe
80
-
659
150mm dia G.I bend
4
-
1966
100mm dia G.I bend
4
-
936
80mm dia G.I bend
4
-
562
150mm dia GI flange
8
-
431
100mm dia GI flange
6
-
318
80mm dia GI flange
6
-
243
5/8" thick nut & bolt
10
-
80
4mm thick rubber insertion
10
-
70
Filling of pipe line trenches with excavated materials in all kind of soil laying in layer not exceeding 0.30m in depth well watered and rammed a directed by the Engineer-in-charge.
708.96
-
100.1
Supplying all labour, T&P and fixing C.I sluice valve/N.R. Valve/Air valve with double flanged ends for water works purpose of the following rating & nominal dia mtrs as per P.H specification complete excluding earth work for laying including cost of S.V,/N.R. Valve/Air valve , nuts, bolts & rubber insertion etc.all complete as per approved specification & direction of EIC.
-
-
-
80mm dia CIDF SV(IS:14846/2000)
3
-
4407.9
100mm dia CIDF SV(IS:14846/2000)
1
-
6003.1
150mm dia CIDF SV(IS:14846/2000)
1
-
9366.59
150mm dia C.I.N.R Valve
1
-
6510
25 mm dia AV(including cost of material)
1
-
1511.68
Supplying of all labour,T&P,material including taxes for construction of RCC valve chambers inside size 0.9x0.9x1.1m & wall thickness 0.15m confirming to approved drawing, design & specification etc. complete as per direction of the Engineer - in Charge.
6
-
16305
Supplying all materials, labour& T&P for construction of RCC single mouth stand post including earth work in all kinds of soil with initial lead and lift with cement concrete (1:2:4) with 12 mm size crusher broken Hard granite chips, reinforcement , plastering with CM(1:4) with punning including centering and shuttering etc all complete fitting and fixing of , GI fittings 20mm elbow 1no, 20x15mm dia GI R/S 1no, 20mm GI Union 1no, CI push cock/Bib cock 1no, PVC Saddle including transportation, taxes and royalties etc. all complete as per the direction of E.I.C. (As per drawing attached here with) including CC drain complete
2
-
9851.1
Supplying of all materials, labour and T&P and constructing RCC stand alone of 2000 litre capacity including fitting fixing all valves & fittings as per the direction of the Engineer in charge.connection including cost of EW pipe ,laying,saddle,ferrule,water meter & tap fittings etc standpost as per approved drawing and design etc all complete as per the direction of Engineer-in-Charge.
-
-
-
Supplying all labour,T&P for earth work in excavation in all kinds of soil including dressing and levelling the bed and depositing the soil with 50 Mtr. Initial lead and 1.5 mtr. Initial lift etc complete as per direction of Engineer-in-Charge.
1.6
-
180.24
Supplying all labour,T&P for filling in foundarion with sand including well watered and rammed with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.68
-
365.5
Supplying all labour,material,T&P for cement concrete (1:4:8) using 4 cm size hard granite crusher broken metal including watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.38
-
4502.8
Supplying all labour,material,T&P for cement concrete (1:2:4) using 12mm size hard granite crusher broken chips including watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.26
-
6320.9
Supplying all labour,material,T&P for K.B brick work in C.m (1:6) including watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
1.68
-
4528.6
Supplying all labour,material,T&P for cement concrete (1:11/2:3) using 12mm size hard granite crusher broken chips for R.C.C. work includinghoisting,laying, watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.71
-
7068.4
Supplying all material, labour,T&P for rigid & smooth centering and shuttering for RCC work imcluding false work and dismantling them after casting including cost of materials etc complete as per direction of Engineer-in-Charge.
15.15
-
753.9
Supplying all labour,T&P for fitting and placing uncoated HYSD bar reinforcement including cost, conveyance of materials etc complete as per drawing and technical specification and direction of Engineer-in-Charge.
0.43
-
10044.42
Supplying all material, labour,T&P for 12 mm thick cement plaster in cement mortar (1:4) for brick work using clean dry river sand including cost,conveyance and royalty of all materials etc complete as per direction of Engineer-in-Charge.
2.64
-
175
Supplying all material, labour,T&P for finishing walls with water proofing cement paint of approved shade on new work two coats to give an even shade including cost,conveyance and royalty of all materials etc complete as per direction of Engineer-in-Charge.
9.19
-
36.7
20 mm HDPE Pipe
10
-
48
20 mm GI Socket
1
-
20
20 mm PVC Ball Cock
1
-
120
20 mm GI Short piece
2
-
35
20 mm x 15 mm GI R/S
2
-
25
15 mm Bib Cock
2
-
112
PVC Saddle
1
-
120
25 mm GI Elbow
1
-
35
25 mm GI Shoprt piece
2
-
18
Cost of manhole cover
1
-
200
Construction of drain
3
-
284
Labour Charges for fitting & fixing of pipe line with all complete
1
-
520
Additional 1 stand alone excluding 1 above
1
-
35740.85
Supplying all labour,T&P,material including taxes for cutting Concrete roads for taking pipelines and making good to the damage and providing CC(1:2:4) of 45 cm width & 8cm depth using 12mm size c.b.h.g chips over cc(1:4:8) of 45 cm width & 15cm depth using 40cm c.b.hg metal over 0.77mtr depth of sand filling in trench etc. complete as per direction of the Engineer - in Charge.
280
-
733.59
Supplying of all labour,T&P,material including taxes for cutting metaled roads for taking pipelines and making good to the damages etc. complete as per direction of the Engineer - in Charge.
80
-
464
Providing functional house hold tap connection(FHTC)( as per letter no-2270/dated 03.02.2020 of PR and DW GoO
-
-
-
For FHTC on ferrule side
183
-
2237
for FHTC on opposite side of ferrule
152
-
2940
CHLORINATION ARRANGEMENT
-
-
-
Circular hopper bottom fibre tank supported with galvanized rod duly fixed over the ground through suitable foundation & nut & bolt having whole arrangement of bottom to remove the blaeching residuals fitted with power agitator to stir the solution and having suitable arrangement for decantation to another fibre covered container fitted with a suitable reciprocating dozing pump to fed the solution to the rising main after ESR carrying discharge of 6.59 lps at 39mtr head
1
-
57000
CONSTRUCTION OF ESR
-
-
-
Supplying of all labour,T&P,material and doing soil testing ,supply of design, drawing , construction, errection, testing & commissioning etc. of RCC elevated storage reservoir of required capacity staging height of 15 mtr consisting of 6/8 nos RCC columns &,bracings . Upto foundation(Pile foundation) using M-25 Concrete and super structure, spherical dome and container wall using R.C.C M-30 including plastering the inside & outside of the container tank and domes, painting of ESR with two coats of approved specific weather coat over one coat of primer, 2nos ISI marked 100/150mm dia CI sluice valve,2nos of 100/150mm dia D/F butter fly valve & it's RCC valve chambers as per approved drawing, supplying, fitting & fixing of CI in-let, out-let, over flow & washing line using double flanged 150mm& 100 mm dia CI column pipe not less than of 80 mtr length (150mm-20 mtr &100mm 60 mtr ) RCC stair case with 32mm dia stainless steel hand rail around top dome, Walk way around container, two sides of stairs and landing etc. , lightening arrester confirming to IS specification, digital water level indicator,100/150mm dia CI puddle collar, 2 nos of 0.6 m dia CI manhole cover at dome , RCC vent with brass jally , Sand filling (1 mtr ) around apron ,etc as per the site condition & construction of 1.0mtr wide CC apron around the ESR should be made by the contractor etc complete as per direction of the Engineer - in- Charge. (The contractor shall execute the work after preparing the design and detail drawing in 5 sets from qualified engineer and to approve all structural design & drawing from StateTechnical Agency(STA) IGIT,Saranga/ CET,BBSR/ VSSUI,Burla/ NIT,Rourkela/ IIT,BBSR at his own cost)
-
-
-
100000 ltr capacity RCC ESR with 15 mtr height staging pile foundation at PARAKULA ZONE-2
1
-
3300000
PARAKULA ZONE-3
-
-
-
Construction of compound wall
-
-
-
Earth work in excavation of foundation in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including dressing & levelling the bed etc all complete as per direction of the EIC.
57.28
-
180.24
Filling in foundation & plinth with sand with well watered and rammed including all cost, lead, royalities etc all complete as per direction of the Engineer-in-charge.
10.93
-
365.5
Supplying all materials,labour, T&P and providing Cement concrete (1:4:8) with 4cm size h.g.c.b metal including all cost, lead royalities & curing etc all complete as per direction of the Engineer-in-charge.
8.98
-
4502.8
RCC M20 with 20mm size crusher brocken hard granite Chips including cost, conveyance,royalities etc. all complete.
16.23
-
5210.4
Brick works with fly ash bricks (25cm x12cm x 8cm) having crushing strenth not less than 75kg/cm² in C.M.(1:6) in foudation & plinth including cost, conveyance, royalities of all materials etc. all complete.
-
-
-
1st footing
5.65
-
4495.3
Super Structure
28.97
-
4528.6
Rigid & smooth centering & shuttering for C.C. works including false work & dismantling them after casting including cost of materials complete
92.5
-
120.7
Supplying, fitting & placing uncoated HYSD bar reinfocement complete as per drawing and technical specification including cost, conveyance of all materials etc. all complete
12.99
-
10044.42
Supplying all materials, labour, T&P and providing Cement concrete(1:2:4) with 12 mm size HG chips including cost carriage royalty of all materials etc all complete.
1
-
6320.9
12mm Thick cement plaster over brick work outside
140.4
-
149.9
16 mm thick cement plaster (1:6) over brick work including cost, conveyance, royalities of all materials etc. complete
139.63
-
215.6
Priming 1 coat over cement plaster outside + inside
280.03
-
58
Finishing wall with water proofing cement paint two coats with any approved shade on old work to give on even shade excluding cost of paint.
280.03
-
36.7
Supplying all labour, materials and T&P for fitting & fixing of M.S. gate etc all complete.Gate-1no (2mx1.5m)=3 sqm. @ 40 kg
120
-
80
Painting 2 coats with any approved paint on new iron work including cost of all labours and materials etc.all complete.Gate-1no (2mx1.5m)=3 sqm.
3
-
148.3
SITE DEVELOPMENT & APPROACH ROAD
-
-
-
Supplying all labour T&P for filling foundation and plinth with sand well watered and rammed including all cost carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
132.6
-
365.5
Supplying all labour T&P for PCC (1:4:8) using 4 CM size black hard granite metal crosser broken including all cost, carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
3.6
-
4502.8
Supplying all materials labour T&P for cement concrete (1:2:4) using 20mm to 12 mm size hard granite crusher broken chips including cost of all materials, carriages, royalty including hoisting and laying and curing etc. all complete as per the direction of Engineer-in-Charge.
2.52
-
6320.9
Supplying of all labour,T&P,material including taxes for construction of brick masonry production well platform all complete as per direction of the Engineer - in Charge.
1
-
21199.4
Construction of pump house
-
-
-
Supplying all labour T&P for earth work in excavation in all kinds of soil within 50 Mtr. Initial lead and 1.5 Mtr. Initial lift including dressing and leveling the bed and site and breaking the clouds to maximum 5 CM to 7 CM and laying in layers not exceed 0.30 Mtr. in depth and as per the direction of Engineer-in-charge.
14.55
-
180.24
Supplying all labour T&P for filling foundation and plinth with sand well watered and rammed including all cost carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
9.73
-
365.5
Supplying all labour T&P for PCC (1:4:8) using 4 CM size black hard granite metal crosser broken including all cost, carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
2.98
-
4502.8
Supplying all materials labour T&P for KB brick masonry in cement mortal (1:6) in foundation and plinth including all cost, carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
4.98
-
4495.3
Supplying all materials labour T&P for RCC work (1:1/2:3) using 12 mm size hard granite crosser broken chips including cost of all materials, carriages, royalty including hoisting and laying and curing up to 3 weeks etc. all complete as per the direction of Engineer-in-Charge.
10.74
-
7068.4
Supplying all materials labour T&P for cutting, bending, binding, tying, fittings and placing on-coated HYSD bar reinforcement including cost of binding wire and MS rod according to the drawing and technical specification as per the direction of Engineer-in-charge
10.74
-
10044.42
Supplying all materials labour T&P for rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials, carriage etc. all complete as per the direction of Engineer-in-charge
-
-
-
Column Base
18.68
-
207.3
Column in S.S
45.24
-
207.3
RCC Lintel
8.27
-
381.03
Roof slab & Chajja
25.22
-
507
Supplying all materials labour T&P for KB brick masonry in cement mortal (1:6) in super structure including all cost, carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
15.46
-
4528.6
Supplying all materials labour T&P for 12 mm thick cement plaster in cement mortal (1:6) finished smooth including cost of all materials, carriage, royalty etc. all complete as per the direction of Engineer-in-charge (Outside)
65.5
-
156.3
Supplying all materials labour T&P for 16 mm thick cement plaster in cement mortal (1:6) finished smooth including cost of all materials, carriage, royalty etc. all complete as per the direction of Engineer-in-charge (Inside)
64.56
-
220.3
Supplying all materials labour T&P for 2.5 CM thick artificial stone flooring with cement concrete (1:2:4) including punning, using 12 mm size crosser broken hard broken chips including cost of all materials, carriage, royalty etc. all complete as per the
15.68
-
328.38
Supplying all materias ,labour T&P for making M.S doors and windows with supply of materials including fitting & fixing at site etc all complete as per the direction of Engineer-in-charge .
344.25
-
80
Supplying all labour T&P for painting 2 coats over a coat of a primer with any approved paint including cost of materials, brusses, putty etc. all complete as per the direction of Engineer-in-charge
14.88
-
187.8
Supplying all materials labour T&P for finishing wallsWall painting 2-coats with weather coat over one coat of primmer of approved shade on new work to give an even shade including cost of paint. etc. all complete as per the direction of Engineer-in-charge
130.06
-
180
Supplying all materials labour T&P for fitting and fixing of Orissa Pan including pipe line arangement etc. all complete as per the direction of Engineer-in-charge
1
-
1250
Supplying all materials labour T&P for fitting and fixing of 25 mm PVC pipe, fittings , tap etc. all complete as per the direction of Engineer-in-charge
1
-
1200
Supplying all materials labour T&P for fitting and fixing of RCC Ring overhead tank over the roof of pump house etc. all complete as per the direction of Engineer-in-charge
1
-
3000
Supplying all materials labour T&P for fitting and fixing of RCC Ring Soak Pit etc. all complete as per the direction of Engineer-in-charge
1
-
3000
Supplying all materials labour T&P for fitting and fixing of PVC door etc. all complete as per the direction of Engineer-in-charge
1
-
2000
Estimate For Internal Wiring To Pump House
-
-
-
P A R T - A
-
-
-
Concealed wiring to light point in Sqmm pvc single multistand cupper wire run inside the casing capping with continious running earth including cost of all materials & required labour charges and taxes materials
-
-
-
a) Short point
6
-
321
b) Medium point
1
-
503
c) Long point
1
-
744
Concealed wiring to Fan point in Sqmm pvc single core multistand cupper wire run inside the casing capping with 5 Amp.switch including cost of all materials,labour charges and taxes as applicable (Medium point) Concealed wiring to 3 pin 5 Amp.plug point in sqmm pvc single core multistand copper wire in exist, board with connection of running earth
1
-
570
Concealed wiring to 3 pin 5 Amp.plug point in sqmm pvc single core multistand copper wire in exist board with connection of running earth
1
-
62
S/F of back light Angle holder
2
-
30
S/F of 10 Amp. Fuse unit
1
-
54
S/F of indicator lamp
1
-
54
S/F of 16 Amp.KDP main switch of ISI make on casing board including cost of all materials and labour including all taxes applicable
1
-
410
P A R T - B
-
-
-
Supply of 100 Amp.415 volt KTPN main switch with fuse unit and neutral bar.The main switch to be fixed on M.S.Frame with nuts & bolts by drilling holes on M.S.Frame complete with all accessaries including cost of all materials and earthing connection.
1
-
3959
Supply fitting fixing of 1 No 4 pole 100Amp MCB Box of reputed make the inside wall of the pump house earthing
1
-
2449
Supply of 100 Amp.Kit Kat of good quality to be fixed inside the pump house.Concealed wiring of Motor point,pannel board from 100 Amp.Kit Kat,main switch by 7/18 pvc copper wire of I.S.I marked with the materials required as detailed below.
-
-
-
a)7/18 pvc single core copper wire
36
-
43
b) PVC flexible pipe
5
-
32
c) Flexible pipe saddle
20
-
2
d) No.10 earthing copper wire
4.5
-
508
e) Anchor bolt 4"
8
-
21
f) Nut bolt 1/4"
16
-
5
g) Nut bolt 3/16
12
-
3
h) 10 mm earthing socket
12
-
24
i) 10 mm Ring socket
12
-
16
j) 25 mm Ring socket
6
-
27
k) Nail of different sizes
0.3
-
54
l) 4 mm thick copper Bush bar plate 12" length
1
-
428
S & F of standard earthing confirming to I.S.3043/1987 including supply and fixing of 38mm / 40 mm dia heavy duty G.I. pipe 3 mtrs long confirming to IS 1239 Part-I/1990.The pipe shall have 12 mm dia perforted holes at 15 cm interval centre to centre up to 2.5 mtrs height from the bottom.Excavation of pit size of 0.75 mtrs x 3 mtrs.The earth pit shall have altenate layer of charcoal & salt around the electrode up to a depth of 465 mm from the bottom with fitting and fixing of copper plate of size 12"x12"x4 mm at bootom of the pipe with soldering complete with
-
-
-
No.10 copper wire bolted with copper plate.
2
-
2140
P A R T - C
-
-
-
BLEACHING PUMP WIRING
-
-
-
1.5 mm2P V C copper
15
-
21
P V C flexible pipe
3
-
32
P V C Saddle
10
-
2
Gutka
0.5
-
34
1" & 1.5" Screw
15
-
2
Earthing wire No.10 copper
0.3
-
508
8" x 10" casing board
1
-
86
P A R T - D
-
-
-
Labour charges for internal single phase and three phase electrical wiring
1
-
2400
Pump & motor & Accessories
-
-
-
Supply errection, testing & commissioning of vertical submersible pump coupled with electric driven 10.00 HP motor having discharge of 8.14 LPS & 48 mtr to run in three phase line voltage rating 330 volt to 440 volt confirming to relevant IS specification of reputed make of KSB/Crompton/CRI/Texmo etc with suitable control panel for submersible pump set three phase consisting C.R.C.A sheet with powder coating both side the box and proper locking system contactor, volt meter, ampere meter weather proof, auto manual switch, volt meter with shunt capacitor selector switch indicating light ON & OFF of switch (B.C.H & L&T Make) with 6mm2 copper conductor with PVC insulating flat submersible cable suitable for above pump sets reputed make of cable (B.C.H, Finolex & Havells make) with installation charges at site.
-
-
-
Submersible Pump set -10.00 H P,DischArge-8.14 LPS, Head -48 mtr
2
-
38775
Supplying all material , labour & T&P for fitting and fixing of Panel board(9.5 A-13.5 A) asper direction of E-I-C.
1
-
7200
Supplying all material , labour & T&P for fitting and fixing of 6 sqmmcable asper direction of E-I-C.
60
-
115
35 mm round armoured cable
30
-
175
Brass pressure gauge of 10 kgf/cm2
1
-
900
80 mm GI Medium grade flanged column pipe 3 mtr long each
8
-
2500
80 mm GI Medium grade flanged column pipe 3 ' long each
1
-
600
100 mm GI Medium grade GI pipe for Tripod 3 nos of each 6 mtr long
18
-
659
80 mm GI clamp to hold column pipe
1
-
425
200 mm dia GI fabricated Production well cover
1
-
850
GI Nut & Bolt
10
-
80
6 mm thick Rubber insertion
10
-
70
Stainless Steel Rope
60
-
50
Supplying all labour ,materials T & P for lifting , lowering & transporatation of pump & motor
1
-
4000
16 mm dia ASTM PVC Pipe for pressure gauge connection
10
-
38.15
32 mm HDPE pipe
10
-
40
LAYING OF PIPELINE
-
-
-
Supplying all materials,labour,T & P and doing earth work in excavation of pipe line trenches in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift in foundation trenches including dressing & leveling the bed etc all complete as per direction of the EIC.
1689.61
-
180.24
Supplying all labour,material, T&P and laying in trenches HDPE pipes & specials of the following outside diameter for all classes and jointing by fusion welding method including testing as per direction by the Engineer in Charge.(Including transportation charges)
-
-
-
160mm HDPE Pipe PN6 PE-80
780
-
1001.6
110mm HDPE Pipe PN6 PE-80
290
-
516.5
90mm HDPE Pipe PN6 PE-80
3080
-
360.1
Supplying all materials, labour, T&P fabrication and laying of G.I. Pipes, TATA/Bansal/Jindal(medium pipes) confirming I.S 1239(P-1) 2004, I.S.- 1978, I.S.-3598 specification of required size and length including earthwork and refilling. THE GI pipes should be of BIS specification having thickness of 4mm to 5.5mm
-
-
-
150mm dia G.I pipe
80
-
1501
100mm dia G.I pipe
90
-
952
80mm dia G.I pipe
80
-
659
150mm dia G.I bend
2
-
1966
100mm dia G.I bend
2
-
936
80mm dia G.I bend
3
-
562
150mm dia GI flange
4
-
431
100mm dia GI flange
4
-
318
80mm dia GI flange
6
-
243
5/8" thick nut & bolt
10
-
80
4mm thick rubber insertion
10
-
70
Filling of pipe line trenches with excavated materials in all kind of soil laying in layer not exceeding 0.30m in depth well watered and rammed a directed by the Engineer-in-charge.
1381.61
-
100.1
Supplying all labour, T&P and fixing C.I sluice valve/N.R. Valve/Air valve with double flanged ends for water works purpose of the following rating & nominal dia mtrs as per P.H specification complete excluding earth work for laying including cost of S.V,/N.R. Valve/Air valve , nuts, bolts & rubber insertion etc.all complete as per approved specification & direction of EIC.
-
-
-
80mm dia CIDF SV(IS:14846/2000)
4
-
4407.9
100mm dia CIDF SV(IS:14846/2000)
1
-
6003.1
150mm dia CIDF SV(IS:14846/2000)
1
-
9366.59
150mm dia C.I.N.R Valve
1
-
6510
25 mm dia AV(including cost of material)
1
-
1511.68
Supplying of all labour,T&P,material including taxes for construction of RCC valve chambers inside size 0.9x0.9x1.1m & wall thickness 0.15m confirming to approved drawing, design & specification etc. complete as per direction of the Engineer - in Charge.
6
-
16305
Supplying all materials, labour& T&P for construction of RCC single mouth stand post including earth work in all kinds of soil with initial lead and lift with cement concrete (1:2:4) with 12 mm size crusher broken Hard granite chips, reinforcement , plastering with CM(1:4) with punning including centering and shuttering etc all complete fitting and fixing of , GI fittings 20mm elbow 1no, 20x15mm dia GI R/S 1no, 20mm GI Union 1no, CI push cock/Bib cock 1no, PVC Saddle including transportation, taxes and royalties etc. all complete as per the direction of E.I.C. (As per drawing attached here with) including CC drain complete
1
-
9851.1
Supplying of all materials, labour and T&P and constructing RCC stand alone of 2000 litre capacity including fitting fixing all valves & fittings as per the direction of the Engineer in charge.connection including cost of EW pipe ,laying,saddle,ferrule,water meter & tap fittings etc standpost as per approved drawing and design etc all complete as per the direction of Engineer-in-Charge.
-
-
-
Supplying all labour,T&P for earth work in excavation in all kinds of soil including dressing and levelling the bed and depositing the soil with 50 Mtr. Initial lead and 1.5 mtr. Initial lift etc complete as per direction of Engineer-in-Charge.
1.6
-
180.24
Supplying all labour,T&P for filling in foundarion with sand including well watered and rammed with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.68
-
365.5
Supplying all labour,material,T&P for cement concrete (1:4:8) using 4 cm size hard granite crusher broken metal including watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.38
-
4502.8
Supplying all labour,material,T&P for cement concrete (1:2:4) using 12mm size hard granite crusher broken chips including watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.26
-
6320.9
Supplying all labour,material,T&P for K.B brick work in C.m (1:6) including watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
1.68
-
4528.6
Supplying all labour,material,T&P for cement concrete (1:11/2:3) using 12mm size hard granite crusher broken chips for R.C.C. work includinghoisting,laying, watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.71
-
7068.4
Supplying all material, labour,T&P for rigid & smooth centering and shuttering for RCC work imcluding false work and dismantling them after casting including cost of materials etc complete as per direction of Engineer-in-Charge.
15.15
-
753.9
Supplying all labour,T&P for fitting and placing uncoated HYSD bar reinforcement including cost, conveyance of materials etc complete as per drawing and technical specification and direction of Engineer-in-Charge.
0.43
-
10044.42
Supplying all material, labour,T&P for 12 mm thick cement plaster in cement mortar (1:4) for brick work using clean dry river sand including cost,conveyance and royalty of all materials etc complete as per direction of Engineer-in-Charge.
2.64
-
175
Supplying all material, labour,T&P for finishing walls with water proofing cement paint of approved shade on new work two coats to give an even shade including cost,conveyance and royalty of all materials etc complete as per direction of Engineer-in-Charge.
9.19
-
36.7
20 mm HDPE Pipe
10
-
48
20 mm GI Socket
1
-
20
20 mm PVC Ball Cock
1
-
120
20 mm GI Short piece
2
-
35
20 mm x 15 mm GI R/S
2
-
25
15 mm Bib Cock
2
-
112
PVC Saddle
1
-
120
25 mm GI Elbow
1
-
35
25 mm GI Shoprt piece
2
-
18
Cost of manhole cover
1
-
200
Construction of drain
3
-
284
Labour Charges for fitting & fixing of pipe line with all complete
1
-
520
Additional 1 stand alone excluding 1 above
1
-
35740.85
Supplying all labour,T&P,material including taxes for cutting Concrete roads for taking pipelines and making good to the damage and providing CC(1:2:4) of 45 cm width & 8cm depth using 12mm size c.b.h.g chips over cc(1:4:8) of 45 cm width & 15cm depth using 40cm c.b.hg metal over 0.77mtr depth of sand filling in trench etc. complete as per direction of the Engineer - in Charge.
500
-
733.59
Supplying of all labour,T&P,material including taxes for cutting metaled roads for taking pipelines and making good to the damages etc. complete as per direction of the Engineer - in Charge.
100
-
464
Providing functional house hold tap connection(FHTC)( as per letter no-2270/dated 03.02.2020 of PR and DW GoO
-
-
-
For FHTC on ferrule side
200
-
2237
for FHTC on opposite side of ferrule
169
-
2940
CHLORINATION ARRANGEMENT
-
-
-
Circular hopper bottom fibre tank supported with galvanized rod duly fixed over the ground through suitable foundation & nut & bolt having whole arrangement of bottom to remove the blaeching residuals fitted with power agitator to stir the solution and having suitable arrangement for decantation to another fibre covered container fitted with a suitable reciprocating dozing pump to fed the solution to the rising main after ESR carrying discharge of 6.59 lps at 39mtr head
1
-
57000
CONSTRUCTION OF ESR
-
-
-
Supplying of all labour,T&P,material and doing soil testing ,supply of design, drawing , construction, errection, testing & commissioning etc. of RCC elevated storage reservoir of required capacity staging height of 15 mtr consisting of 6/8 nos RCC columns &,bracings . Upto foundation(Pile foundation) using M-25 Concrete and super structure, spherical dome and container wall using R.C.C M-30 including plastering the inside & outside of the container tank and domes, painting of ESR with two coats of approved specific weather coat over one coat of primer, 2nos ISI marked 100/150mm dia CI sluice valve,2nos of 100/150mm dia D/F butter fly valve & it's RCC valve chambers as per approved drawing, supplying, fitting & fixing of CI in-let, out-let, over flow & washing line using double flanged 150mm& 100 mm dia CI column pipe not less than of 80 mtr length (150mm-20 mtr &100mm 60 mtr ) RCC stair case with 32mm dia stainless steel hand rail around top dome, Walk way around container, two sides of stairs and landing etc. , lightening arrester confirming to IS specification, digital water level indicator,100/150mm dia CI puddle collar, 2 nos of 0.6 m dia CI manhole cover at dome , RCC vent with brass jally , Sand filling (1 mtr ) around apron ,etc as per the site condition & construction of 1.0mtr wide CC apron around the ESR should be made by the contractor etc complete as per direction of the Engineer - in- Charge. (The contractor shall execute the work after preparing the design and detail drawing in 5 sets from qualified engineer and to approve all structural design & drawing from StateTechnical Agency(STA) IGIT,Saranga/ CET,BBSR/ VSSUI,Burla/ NIT,Rourkela/ IIT,BBSR at his own cost)
-
-
-
100000 ltr capacity RCC ESR with 15 mtr height staging pile foundation at PARAKULA ZONE-3
1
-
3300000
Operation & Maintenance of PARAKULA (zone-1,zone-2.zone-3) @ 5 Years
5
-
222280.8
JAMAPADA ZONE-1
-
-
-
SITE DEVELOPMENT & APPROACH ROAD
-
-
-
Supplying all labour T&P for filling foundation and plinth with sand well watered and rammed including all cost carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
129.13
-
321.1
Supplying all labour T&P for PCC (1:4:8) using 4 CM size black hard granite metal crosser broken including all cost, carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
5.63
-
4670.5
Supplying all materials labour T&P for cement concrete (1:2:4) using 20mm to 12 mm size hard granite crusher broken chips including cost of all materials, carriages, royalty including hoisting and laying and curing etc. all complete as per the direction of Engineer-in-Charge.
5.63
-
6492.5
Supplying of all labour,T&P,material including taxes for construction of brick masonry production well platform all complete as per direction of the Engineer - in Charge.
1
-
21119
LAYING OF PIPELINE
-
-
-
Supplying all materials,labour,T & P and doing earth work in excavation of pipe line trenches in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift in foundation trenches including dressing & leveling the bed etc all complete as per direction of the EIC.
603.1
-
180.24
Supplying all labour,material, T&P and laying in trenches HDPE pipes & specials of the following outside diameter for all classes and jointing by fusion welding method including testing as per direction by the Engineer in Charge.(Including transportation charges)
-
-
-
160mm HDPE Pipe PN6 PE-80
467
-
1001.6
110mm HDPE Pipe PN6 PE-80
569
-
516.5
90mm HDPE Pipe PN6 PE-80
362
-
360.1
Supplying all materials, labour, T&P fabrication and laying of G.I. Pipes, TATA/Bansal/Jindal(medium pipes) confirming I.S 1239(P-1) 2004, I.S.- 1978, I.S.-3598 specification of required size and length including earthwork and refilling. THE GI pipes should be of BIS specification having thickness of 4mm to 5.5mm
-
-
-
100mm dia G.I bend
4
-
936
100mm dia GI flange
4
-
318
5/8" thick nut & bolt
10
-
80
4mm thick rubber insertion
10
-
70
Filling of pipe line trenches with excavated materials in all kind of soil laying in layer not exceeding 0.30m in depth well watered and rammed a directed by the Engineer-in-charge.
541.02
-
100.1
Supplying all labour, T&P and fixing C.I sluice valve/N.R. Valve/Air valve with double flanged ends for water works purpose of the following rating & nominal dia mtrs as per P.H specification complete excluding earth work for laying including cost of S.V,/N.R. Valve/Air valve , nuts, bolts & rubber insertion etc.all complete as per approved specification & direction of EIC.
-
-
-
100mm dia CIDF SV(IS:14846/2000)
1
-
6010
150mm dia CIDF SV(IS:14846/2000)
1
-
9366.6
25 mm dia AV(including cost of material)
1
-
1515
Supplying of all labour,T&P,material including taxes for construction of RCC valve chambers inside size 0.9x0.9x1.1m & wall thickness 0.15m confirming to approved drawing, design & specification etc. complete as per direction of the Engineer - in Charge.
2
-
16305
Supplying all materials, labour& T&P for construction of RCC single mouth stand post including earth work in all kinds of soil with initial lead and lift with cement concrete (1:2:4) with 12 mm size crusher broken Hard granite chips, reinforcement , plastering with CM(1:4) with punning including centering and shuttering etc all complete fitting and fixing of , GI fittings 20mm elbow 1no, 20x15mm dia GI R/S 1no, 20mm GI Union 1no, CI push cock/Bib cock 1no, PVC Saddle including transportation, taxes and royalties etc. all complete as per the direction of E.I.C. (As per drawing attached here with) including CC drain complete
1
-
3547.9
Supplying of all materials, labour and T&P and constructing RCC stand alone of 2000 litre capacity including fitting fixing all valves & fittings as per the direction of the Engineer in charge.connection including cost of EW pipe ,laying,saddle,ferrule,water meter & tap fittings etc standpost as per approved drawing and design etc all complete as per the direction of Engineer-in-Charge.
-
-
-
Supplying all labour,T&P for earth work in excavation in all kinds of soil including dressing and levelling the bed and depositing the soil with 50 Mtr. Initial lead and 1.5 mtr. Initial lift etc complete as per direction of Engineer-in-Charge.
1.6
-
180.24
Supplying all labour,T&P for filling in foundarion with sand including well watered and rammed with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.68
-
321.1
Supplying all labour,material,T&P for cement concrete (1:4:8) using 4 cm size hard granite crusher broken metal including watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.38
-
4687.4
Supplying all labour,material,T&P for cement concrete (1:2:4) using 12mm size hard granite crusher broken chips including watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.26
-
6494
Supplying all labour,material,T&P for K.B brick work in C.m (1:6) including watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
1.68
-
4503.7
Supplying all labour,material,T&P for cement concrete (1:11/2:3) using 12mm size hard granite crusher broken chips for R.C.C. work includinghoisting,laying, watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.71
-
7241.5
Supplying all material, labour,T&P for rigid & smooth centering and shuttering for RCC work imcluding false work and dismantling them after casting including cost of materials etc complete as per direction of Engineer-in-Charge.
15.15
-
753.9
Supplying all labour,T&P for fitting and placing uncoated HYSD bar reinforcement including cost, conveyance of materials etc complete as per drawing and technical specification and direction of Engineer-in-Charge.
0.43
-
10044.4
Supplying all material, labour,T&P for 12 mm thick cement plaster in cement mortar (1:4) for brick work using clean dry river sand including cost,conveyance and royalty of all materials etc complete as per direction of Engineer-in-Charge.
2.64
-
177
Supplying all material, labour,T&P for finishing walls with water proofing cement paint of approved shade on new work two coats to give an even shade including cost,conveyance and royalty of all materials etc complete as per direction of Engineer-in-Charge.
9.19
-
36.7
20 mm HDPE Pipe
10
-
48
20 mm GI Socket
1
-
20
20 mm PVC Ball Cock
1
-
120
20 mm GI Short piece
2
-
35
20 mm x 15 mm GI R/S
2
-
25
15 mm Bib Cock
2
-
112
PVC Saddle
1
-
120
25 mm GI Elbow
1
-
35
25 mm GI Shoprt piece
2
-
18
Cost of manhole cover
1
-
200
Construction of drain
3
-
284
Labour Charges for fitting & fixing of pipe line with all complete
1
-
520
Additional 1 stand alone excluding 1 above
1
-
35911.4
Supplying all labour,T&P,material including taxes for cutting Concrete roads for taking pipelines and making good to the damage and providing CC(1:2:4) of 45 cm width & 8cm depth using 12mm size c.b.h.g chips over cc(1:4:8) of 45 cm width & 15cm depth using 40cm c.b.hg metal over 0.77mtr depth of sand filling in trench etc. complete as per direction of the Engineer - in Charge.
100
-
733.59
Providing functional house hold tap connection(FHTC)( as per letter no-2270/dated 03.02.2020 of PR and DW GoO
-
-
-
For FHTC on ferrule side
145
-
2237
for FHTC on opposite side of ferrule
110
-
2940
CHLORINATION ARRANGEMENT
-
-
-
Circular hopper bottom fibre tank supported with galvanized rod duly fixed over the ground through suitable foundation & nut & bolt having whole arrangement of bottom to remove the blaeching residuals fitted with power agitator to stir the solution and having suitable arrangement for decantation to another fibre covered container fitted with a suitable reciprocating dozing pump to fed the solution to the rising main after ESR carrying discharge of 6.59 lps at 39mtr head
1
-
57000
JAMAPADA ZONE-2
-
-
-
Construction of compound wall
-
-
-
Earth work in excavation of foundation in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including dressing & levelling the bed etc all complete as per direction of the EIC.
28.06
-
180.24
Filling in foundation & plinth with sand with well watered and rammed including all cost, lead, royalities etc all complete as per direction of the Engineer-in-charge.
2.43
-
321.1
Supplying all materials,labour, T&P and providing Cement concrete (1:4:8) with 4cm size h.g.c.b metal including all cost, lead royalities & curing etc all complete as per direction of the Engineer-in-charge.
2.43
-
4687.4
RCC M20 with 20mm size crusher brocken hard granite Chips including cost, conveyance,royalities etc. all complete.
13.15
-
5687.2
Brick works with fly ash bricks (25cm x12cm x 8cm) having crushing strenth not less than 75kg/cm² in C.M.(1:6) in foudation & plinth including cost, conveyance, royalities of all materials etc. all complete.
-
-
-
1st footing
7.88
-
4470.4
Super Structure
22.5
-
4503.7
Rigid & smooth centering & shuttering for C.C. works including false work & dismantling them after casting including cost of materials complete
76
-
120.7
Supplying, fitting & placing uncoated HYSD bar reinfocement complete as per drawing and technical specification including cost, conveyance of all materials etc. all complete
10.52
-
10044.24
Supplying all materials, labour, T&P and providing Cement concrete(1:2:4) with 12 mm size HG chips including cost carriage royalty of all materials etc all complete.
0.75
-
6494
12mm Thick cement plaster over brick work outside
104.4
-
149.9
16 mm thick cement plaster (1:6) over brick work including cost, conveyance, royalities of all materials etc. complete
139.63
-
218
Priming 1 coat over cement plaster outside + inside
244.03
-
58
Finishing wall with water proofing weather coat of approved shade on new work two coats an even shade including cost of paint.
208.61
-
187.8
Supplying all labour, materials and T&P for fitting & fixing of M.S. gate etc all complete.Gate-1no (2mx1.5m)=3 sqm. @ 40 kg
120
-
70
Painting 2 coats with any approved paint on new iron work including cost of all labours and materials etc.all complete.Gate-1no (2mx1.5m)=3 sqm.
3
-
117.28
SITE DEVELOPMENT & APPROACH ROAD
-
-
-
Supplying all labour T&P for filling foundation and plinth with sand well watered and rammed including all cost carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
129.13
-
321.1
Supplying all labour T&P for PCC (1:4:8) using 4 CM size black hard granite metal crosser broken including all cost, carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
5.63
-
4670
Supplying all materials labour T&P for cement concrete (1:2:4) using 20mm to 12 mm size hard granite crusher broken chips including cost of all materials, carriages, royalty including hoisting and laying and curing etc. all complete as per the direction of Engineer-in-Charge.
5.63
-
6492
Supplying of all labour,T&P,material including taxes for construction of brick masonry production well platform all complete as per direction of the Engineer - in Charge.
1
-
21119
Construction of pump house
-
-
-
Supplying all labour T&P for earth work in excavation in all kinds of soil within 50 Mtr. Initial lead and 1.5 Mtr. Initial lift including dressing and leveling the bed and site and breaking the clouds to maximum 5 CM to 7 CM and laying in layers not exceed 0.30 Mtr. in depth and as per the direction of Engineer-in-charge.
14.55
-
180.24
Supplying all labour T&P for filling foundation and plinth with sand well watered and rammed including all cost carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
9.73
-
365.5
Supplying all labour T&P for PCC (1:4:8) using 4 CM size black hard granite metal crosser broken including all cost, carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
2.98
-
4426.6
Supplying all materials labour T&P for KB brick masonry in cement mortal (1:6) in foundation and plinth including all cost, carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
4.98
-
4470.4
Supplying all materials labour T&P for RCC work (1:1/2:3) using 12 mm size hard granite crosser broken chips including cost of all materials, carriages, royalty including hoisting and laying and curing up to 3 weeks etc. all complete as per the direction of Engineer-in-Charge.
10.74
-
5261.1
Supplying all materials labour T&P for cutting, bending, binding, tying, fittings and placing on-coated HYSD bar reinforcement including cost of binding wire and MS rod according to the drawing and technical specification as per the direction of Engineer-in-charge
10.74
-
10044.4
Supplying all materials labour T&P for rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials, carriage etc. all complete as per the direction of Engineer-in-charge
-
-
-
Column Base
18.68
-
207.3
Column in S.S
45.24
-
207.3
RCC Lintel
8.27
-
282.28
Roof slab & Chajja
25.22
-
451.4
Supplying all materials labour T&P for KB brick masonry in cement mortal (1:6) in super structure including all cost, carriage, royalty etc. all complete as per the direction of Engineer-in-charge.
15.46
-
4503.7
Supplying all materials labour T&P for 12 mm thick cement plaster in cement mortal (1:6) finished smooth including cost of all materials, carriage, royalty etc. all complete as per the direction of Engineer-in-charge (Outside)
65.5
-
155.1
Supplying all materials labour T&P for 16 mm thick cement plaster in cement mortal (1:6) finished smooth including cost of all materials, carriage, royalty etc. all complete as per the direction of Engineer-in-charge (Inside)
64.56
-
218
Supplying all materials labour T&P for 2.5 CM thick artificial stone flooring with cement concrete (1:2:4) including punning, using 12 mm size crosser broken hard broken chips including cost of all materials, carriage, royalty etc. all complete as per the
15.68
-
323.8
Supplying all materias ,labour T&P for making M.S doors and windows with supply of materials including fitting & fixing at site etc all complete as per the direction of Engineer-in-charge .
344.25
-
80
Supplying all labour T&P for painting 2 coats over a coat of a primer with any approved paint including cost of materials, brusses, putty etc. all complete as per the direction of Engineer-in-charge
14.88
-
187.8
Supplying all materials labour T&P for finishing wallsWall painting 2-coats with weather coat over one coat of primmer of approved shade on new work to give an even shade including cost of paint. etc. all complete as per the direction of Engineer-in-charge
130.06
-
180
Supplying all materials labour T&P for fitting and fixing of Orissa Pan including pipe line arangement etc. all complete as per the direction of Engineer-in-charge
1
-
1250
Supplying all materials labour T&P for fitting and fixing of 25 mm PVC pipe, fittings , tap etc. all complete as per the direction of Engineer-in-charge
1
-
1200
Supplying all materials labour T&P for fitting and fixing of RCC Ring overhead tank over the roof of pump house etc. all complete as per the direction of Engineer-in-charge
1
-
3000
Supplying all materials labour T&P for fitting and fixing of RCC Ring Soak Pit etc. all complete as per the direction of Engineer-in-charge
1
-
3000
Supplying all materials labour T&P for fitting and fixing of PVC door etc. all complete as per the direction of Engineer-in-charge
1
-
2000
Estimate For Internal Wiring To Pump House
-
-
-
P A R T - A
-
-
-
Concealed wiring to light point in Sqmm pvc single multistand cupper wire run inside the casing capping with continious running earth including cost of all materials & required labour charges and taxes materials
-
-
-
a) Short point
6
-
321
b) Medium point
1
-
503
c) Long point
1
-
744
Concealed wiring to Fan point in Sqmm pvc single core multistand cupper wire run inside the casing capping with 5 Amp.switch including cost of all materials,labour charges and taxes as applicable (Medium point) Concealed wiring to 3 pin 5 Amp.plug point in sqmm pvc single core multistand copper wire in exist, board with connection of running earth
1
-
570
Concealed wiring to 3 pin 5 Amp.plug point in sqmm pvc single core multistand copper wire in exist board with connection of running earth
1
-
62
S/F of back light Angle holder
2
-
30
S/F of 10 Amp. Fuse unit
1
-
54
S/F of indicator lamp
1
-
54
S/F of 16 Amp.KDP main switch of ISI make on casing board including cost of all materials and labour including all taxes applicable
1
-
410
P A R T - B
-
-
-
Supply of 100 Amp.415 volt KTPN main switch with fuse unit and neutral bar.The main switch to be fixed on M.S.Frame with nuts & bolts by drilling holes on M.S.Frame complete with all accessaries including cost of all materials and earthing connection.
1
-
3959
Supply fitting fixing of 1 No 4 pole 100Amp MCB Box of reputed make the inside wall of the pump house earthing
1
-
2449
Supply of 100 Amp.Kit Kat of good quality to be fixed inside the pump house.Concealed wiring of Motor point,pannel board from 100 Amp.Kit Kat,main switch by 7/18 pvc copper wire of I.S.I marked with the materials required as detailed below.
-
-
-
a)7/18 pvc single core copper wire
36
-
43
b) PVC flexible pipe
5
-
32
c) Flexible pipe saddle
20
-
2
d) No.10 earthing copper wire
4.5
-
508
e) Anchor bolt 4"
8
-
21
f) Nut bolt 1/4"
16
-
5
g) Nut bolt 3/16
12
-
3
h) 10 mm earthing socket
12
-
24
i) 10 mm Ring socket
12
-
16
j) 25 mm Ring socket
6
-
27
k) Nail of different sizes
0.3
-
54
l) 4 mm thick copper Bush bar plate 12" length
1
-
428
S & F of standard earthing confirming to I.S.3043/1987 including supply and fixing of 38mm / 40 mm dia heavy duty G.I. pipe 3 mtrs long confirming to IS 1239 Part-I/1990.The pipe shall have 12 mm dia perforted holes at 15 cm interval centre to centre up to 2.5 mtrs height from the bottom.Excavation of pit size of 0.75 mtrs x 3 mtrs.The earth pit shall have altenate layer of charcoal & salt around the electrode up to a depth of 465 mm from the bottom with fitting and fixing of copper plate of size 12"x12"x4 mm at bootom of the pipe with soldering complete with
-
-
-
No.10 copper wire bolted with copper plate.
2
-
2140
P A R T - C
-
-
-
BLEACHING PUMP WIRING
-
-
-
1.5 mm2P V C copper
15
-
21
P V C flexible pipe
3
-
32
P V C Saddle
10
-
2
Gutka
0.5
-
34
1" & 1.5" Screw
15
-
2
Earthing wire No.10 copper
0.3
-
508
8" x 10" casing board
1
-
86
P A R T - D
-
-
-
Labour charges for internal single phase and three phase electrical wiring
1
-
2400
Pump & motor & Accessories
-
-
-
Supply errection, testing & commissioning of vertical submersible pump coupled with electric driven 7.5 HP motor having discharge of 7.38 LPS & 45 mtr to run in three phase line voltage rating 330 volt to 440 volt confirming to relevant IS specification of reputed make of KSB/Crompton/CRI/Texmo etc with suitable control panel for submersible pump set three phase consisting C.R.C.A sheet with powder coating both side the box and proper locking system contactor, volt meter, ampere meter weather proof, auto manual switch, volt meter with shunt capacitor selector switch indicating light ON & OFF of switch (B.C.H & L&T Make) with 6mm2 copper conductor with PVC insulating flat submersible cable suitable for above pump sets reputed make of cable (B.C.H, Finolex & Havells make) with installation charges at site.
-
-
-
Submersible Pump set -7.5H P,DischArge-7.38 LPS, Head -45 mtr
2
-
35858.2
Supplying all material , labour & T&P for fitting and fixing of Panel board(9.5 A-13.5 A) asper direction of E-I-C.
1
-
7200
Supplying all material , labour & T&P for fitting and fixing of 6 sqmmcable asper direction of E-I-C.
60
-
115
35 mm round armoured cable
30
-
175
Brass pressure gauge of 10 kgf/cm2
1
-
900
80 mm GI Medium grade flanged column pipe 3 mtr long each
8
-
2500
80 mm GI Medium grade flanged column pipe 3 ' long each
1
-
600
100 mm GI Medium grade GI pipe for Tripod 3 nos of each 6 mtr long
18
-
659
80 mm GI clamp to hold column pipe
1
-
425
200 mm dia GI fabricated Production well cover
1
-
850
GI Nut & Bolt
10
-
80
6 mm thick Rubber insertion
10
-
70
Stainless Steel Rope
60
-
50
Supplying all labour ,materials T & P for lifting , lowering & transporatation of pump & motor
1
-
4000
16 mm dia ASTM PVC Pipe for pressure gauge connection
10
-
38.15
32 mm HDPE pipe
10
-
40
LAYING OF PIPELINE
-
-
-
Supplying all materials,labour,T & P and doing earth work in excavation of pipe line trenches in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift in foundation trenches including dressing & leveling the bed etc all complete as per direction of the EIC.
1245.22
-
180.24
Supplying all labour,material, T&P and laying in trenches HDPE pipes & specials of the following outside diameter for all classes and jointing by fusion welding method including testing as per direction by the Engineer in Charge.(Including transportation charges)
-
-
-
160mm HDPE Pipe PN6 PE-80
1085
-
1001.6
110mm HDPE Pipe PN6 PE-80
1405
-
516.5
90mm HDPE Pipe PN6 PE-80
348
-
360.1
Supplying all materials, labour, T&P fabrication and laying of G.I. Pipes, TATA/Bansal/Jindal(medium pipes) confirming I.S 1239(P-1) 2004, I.S.- 1978, I.S.-3598 specification of required size and length including earthwork and refilling. THE GI pipes should be of BIS specification having thickness of 4mm to 5.5mm
-
-
-
150mm dia G.I pipe
45
-
1501
100mm dia G.I pipe
20
-
952
100mm dia G.I bend
4
-
936
80mm dia G.I bend
4
-
562
100mm dia GI flange
4
-
318
80mm dia GI flange
4
-
243
5/8" thick nut & bolt
10
-
80
4mm thick rubber insertion
10
-
70
Filling of pipe line trenches with excavated materials in all kind of soil laying in layer not exceeding 0.30m in depth well watered and rammed a directed by the Engineer-in-charge.
1106.61
-
100.1
Supplying all labour, T&P and fixing C.I sluice valve/N.R. Valve/Air valve with double flanged ends for water works purpose of the following rating & nominal dia mtrs as per P.H specification complete excluding earth work for laying including cost of S.V,/N.R. Valve/Air valve , nuts, bolts & rubber insertion etc.all complete as per approved specification & direction of EIC.
-
-
-
80mm dia CIDF SV(IS:14846/2000)
1
-
4407.91
100mm dia CIDF SV(IS:14846/2000)
2
-
6010
150mm dia CIDF SV(IS:14846/2000)
2
-
9366.6
150mm dia C.I.N.R Valve
1
-
6510
25 mm dia AV(including cost of material)
2
-
2680.75
Supplying of all labour,T&P,material including taxes for construction of RCC valve chambers inside size 0.9x0.9x1.1m & wall thickness 0.15m confirming to approved drawing, design & specification etc. complete as per direction of the Engineer - in Charge.
6
-
16305
Supplying all materials, labour& T&P for construction of RCC single mouth stand post including earth work in all kinds of soil with initial lead and lift with cement concrete (1:2:4) with 12 mm size crusher broken Hard granite chips, reinforcement , plastering with CM(1:4) with punning including centering and shuttering etc all complete fitting and fixing of , GI fittings 20mm elbow 1no, 20x15mm dia GI R/S 1no, 20mm GI Union 1no, CI push cock/Bib cock 1no, PVC Saddle including transportation, taxes and royalties etc. all complete as per the direction of E.I.C. (As per drawing attached here with) including CC drain complete
2
-
3572
Supplying of all materials, labour and T&P and constructing RCC stand alone of 2000 litre capacity including fitting fixing all valves & fittings as per the direction of the Engineer in charge.connection including cost of EW pipe ,laying,saddle,ferrule,water meter & tap fittings etc standpost as per approved drawing and design etc all complete as per the direction of Engineer-in-Charge.
-
-
-
Supplying all labour,T&P for earth work in excavation in all kinds of soil including dressing and levelling the bed and depositing the soil with 50 Mtr. Initial lead and 1.5 mtr. Initial lift etc complete as per direction of Engineer-in-Charge.
1.6
-
180.24
Supplying all labour,T&P for filling in foundarion with sand including well watered and rammed with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.68
-
321.1
Supplying all labour,material,T&P for cement concrete (1:4:8) using 4 cm size hard granite crusher broken metal including watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.38
-
4687.4
Supplying all labour,material,T&P for cement concrete (1:2:4) using 12mm size hard granite crusher broken chips including watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.26
-
6494
Supplying all labour,material,T&P for K.B brick work in C.m (1:6) including watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
1.68
-
4503.7
Supplying all labour,material,T&P for cement concrete (1:11/2:3) using 12mm size hard granite crusher broken chips for R.C.C. work includinghoisting,laying, watering,curing with cost,conveyance & royalty of the materials etc. complete as per direction of Engineer-in-Charge.
0.71
-
7241.5
Supplying all material, labour,T&P for rigid & smooth centering and shuttering for RCC work imcluding false work and dismantling them after casting including cost of materials etc complete as per direction of Engineer-in-Charge.
15.15
-
753.9
Supplying all labour,T&P for fitting and placing uncoated HYSD bar reinforcement including cost, conveyance of materials etc complete as per drawing and technical specification and direction of Engineer-in-Charge.
0.43
-
10044.4
Supplying all material, labour,T&P for 12 mm thick cement plaster in cement mortar (1:4) for brick work using clean dry river sand including cost,conveyance and royalty of all materials etc complete as per direction of Engineer-in-Charge.
2.64
-
177
Supplying all material, labour,T&P for finishing walls with water proofing cement paint of approved shade on new work two coats to give an even shade including cost,conveyance and royalty of all materials etc complete as per direction of Engineer-in-Charge.
9.19
-
36.7
20 mm HDPE Pipe
10
-
48
20 mm GI Socket
1
-
20
20 mm PVC Ball Cock
1
-
120
20 mm GI Short piece
2
-
35
20 mm x 15 mm GI R/S
2
-
25
15 mm Bib Cock
2
-
112
PVC Saddle
1
-
120
25 mm GI Elbow
1
-
35
25 mm GI Shoprt piece
2
-
18
Cost of manhole cover
1
-
200
Construction of drain
3
-
284
Labour Charges for fitting & fixing of pipe line with all complete
1
-
520
Additional 1 stand alone excluding 1 above
1
-
35911.4
Supplying all labour,T&P,material including taxes for cutting Concrete roads for taking pipelines and making good to the damage and providing CC(1:2:4) of 45 cm width & 8cm depth using 12mm size c.b.h.g chips over cc(1:4:8) of 45 cm width & 15cm depth using 40cm c.b.hg metal over 0.77mtr depth of sand filling in trench etc. complete as per direction of the Engineer - in Charge.
200
-
733.59
Supplying of all labour,T&P,material including taxes for cutting metaled roads for taking pipelines and making good to the damages etc. complete as per direction of the Engineer - in Charge.
25
-
464
Providing functional house hold tap connection(FHTC)( as per letter no-2270/dated 03.02.2020 of PR and DW GoO
-
-
-
For FHTC on ferrule side
195
-
2237
for FHTC on opposite side of ferrule
135
-
2940
CHLORINATION ARRANGEMENT
-
-
-
Circular hopper bottom fibre tank supported with galvanized rod duly fixed over the ground through suitable foundation & nut & bolt having whole arrangement of bottom to remove the blaeching residuals fitted with power agitator to stir the solution and having suitable arrangement for decantation to another fibre covered container fitted with a suitable reciprocating dozing pump to fed the solution to the rising main after ESR carrying discharge of 6.59 lps at 39mtr head
1
-
57000
CONSTRUCTION OF ESR
-
-
-
Supplying of all labour,T&P,material and doing soil testing ,supply of design, drawing , construction, errection, testing & commissioning etc. of RCC elevated storage reservoir of required capacity staging height of 15 mtr consisting of 6/8 nos RCC columns &,bracings . Upto foundation(Pile foundation) using M-25 Concrete and super structure, spherical dome and container wall using R.C.C M-30 including plastering the inside & outside of the container tank and domes, painting of ESR with two coats of approved specific weather coat over one coat of primer, 2nos ISI marked 100/150mm dia CI sluice valve,2nos of 100/150mm dia D/F butter fly valve & it's RCC valve chambers as per approved drawing, supplying, fitting & fixing of CI in-let, out-let, over flow & washing line using double flanged 150mm& 100 mm dia CI column pipe not less than of 80 mtr length (150mm-20 mtr &100mm 60 mtr ) RCC stair case with 32mm dia stainless steel hand rail around top dome, Walk way around container, two sides of stairs and landing etc. , lightening arrester confirming to IS specification, digital water level indicator,100/150mm dia CI puddle collar, 2 nos of 0.6 m dia CI manhole cover at dome , RCC vent with brass jally , Sand filling (1 mtr ) around apron ,etc as per the site condition & construction of 1.0mtr wide CC apron around the ESR should be made by the contractor etc complete as per direction of the Engineer - in- Charge. (The contractor shall execute the work after preparing the design and detail drawing in 5 sets from qualified engineer and to approve all structural design & drawing from StateTechnical Agency(STA) IGIT,Saranga/ CET,BBSR/ VSSUI,Burla/ NIT,Rourkela/ IIT,BBSR at his own cost)
-
-
-
100000 ltr capacity RCC ESR with 15 mtr height staging pile foundation at JAMAPADA ZONE-2
1
-
3300000
Operation & maitenance of Jamapada (zone-1,zone-2) @ 5 Years
5
-
101678.8
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements