Rural Water Supply And Sanitation Department Tender

Electrical installation of 3phase power internal wiring of power supply connection to switch room. as per detailed scope of work & technical specification, quantity of work in Section-5 & in Annexure - D (including all taxes but excluding GST)

SUPPLY OF SUBMERSIBLE PUMPSET, CONTROL PANNEL BOARD, FLAT CABLE & ARMOURED CABLE RUBBER MAT,LOWERING OF PUMP & MOTOR ETC.. as per detailed scope of work & technical specification, quantity of work in Section-5 & in Annexure - E (including all taxes but excluding GST)

MS /GI Work ( both Head Works Site & Distribution Site) as per detailed scope of work & technical specification, quantity of work in Section-5 & in Annexure - F (including all taxes but excluding GST)

DISTRIBUTION SYSTEM as per detailed scope of work & technical specification, quantity of work in Section-5 & in Annexure - G (including all taxes but excluding GST)

Treatment Unit Zone-A - Providing chlorination arrangement with of required capacity with agitator, Dosing Pump etc. including cost of all materials, pipes, fittings, valves etc. including cost of installation etc. all complete as per detailed scope of work & technical specification, quantity of work in Section-5 & in Annexure - H (including all taxes but excluding GST)

Supplying of all labour,T&P,material for soil testing , design, drawing , construction, errection, testing & commissioning of 100,000 ltrs capacity with 12 mtr staging RCC elevated storage reservoir including supply & fixing of 150mm GI Pipe for in-let & 100mm GI pipe for out-let, over flow & washing line of required length, supply & fixing of 100mm dia sluice valve-3 nos,150 mm dia SV-1No,150mm NRV-1 no.with construction of valve chamber-4 nos(For 80mm to 200mm dia SV/NRV),providing RCC stair case from bottom to top, 32mm dia G.I hand rail in stair case, around dome and landing etc. and stainless steel ladder inside & Alluminium ladder out-side of the ESR, lightening arrester confirming to IS specification, digital water level indicator, 4 Nos of required dia CI puddle collar, 0.6 m dia CI manhole cover at dome of two nos , RCC vent with M.S. jally, M.S. Ventilator, M.S. door with painting, M.S Window with painting etc. complete as per direction of the Engineer - in- Charge. (The contractor shall execute the work after preparing the design and detail drawing in 5 sets from qualified engineer and to approve all structural design & drawing from State Technical Agency(STA) IGIT, Saranga/ CET, BBSR/ VSSUI, Burla/ NIT, Rourkela/ IIT, BBSR at his own cost). as per detailed scope of work & technical specification, quantity of work in Section-5 & in Annexure - I (including all taxes but excluding GST)

The contractor shall maintain the PWS project for Five (5) calendar years from the completion date of defect liability period of one year in such a manner that all the house hold of the PWS Scheme covered area will get (adequate) required quantity of supply water taking supply hour as 8hour/day without facing any problem.The contractor shall repair and replace any types of defect arise within 24 hr of receipt of complaint either from public or from Department . The contractor shall maintain all structure of the PWS schemes as per terms and conditions of DTCN & technical specification mentioned in Section-5 Annexure-J (including all taxes but excluding GST)