Rural Water Supply And Sanitation Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Ariba And 3 Villages Under Gosani Block
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_RWSS_74295_1Bid Award Id
ViewTender No
EE/RWSS/GPT/20/2021-22Tender Authority
Rural Water Supply And Sanitation Department ViewPurchaser Address
-Website
http://https://rayagada.nic.in/rural-water-supply-sanitation/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
110 mm dia O.D. HDPE. Pipe (Including pipe cost) PE80, PN-08
600
-
739.7
Supplying all labour, T&P for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of Engineer-in-charge.
864.52
-
113.46
Supplying all labor T&P for Dismantling and removing Cement Concrete works etc.& depositing the usable materials with in initial lead & lift
90
-
585.4
Supplying all materials , labour ,T.&.P & providing C.C.work for making good to the dismentaled C.C. (1:4:8) during laying of pipeline etc as per the direction of the Engineer in Charge.
45
-
3844.4
Supplying all materials , labour ,T.&.P & providing C.C.work for making good to the dismentaled C.C. (1:2:4) during laying of pipeline etc as per the direction of the Engineer in Charge.
45
-
5619.4
Supplying all labour and T&P for cutting metal road for taking pipe line and making good to the damages T&P etc., complete and as per direction of Engineer-in-charge.
100
-
312
Supplying all materials, labour and T&P for fixing of following sizes of C.I. SLUICE / NON RETURN VALVES with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete.150mm dia S.V
1
-
9793
Supplying all materials, labour and T&P for fixing of following sizes of C.I. SLUICE / NON RETURN VALVES with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete.100mm dia S.V
2
-
6271
Supplying all materials, labour and T&P for fixing of following sizes of C.I. SLUICE / NON RETURN VALVES with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete.80mm dia S.V
9
-
4620
Supplying all materials, labour and T&P for fixing of following sizes of C.I. SLUICE / NON RETURN VALVES with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete.80mm dia N.R.V
2
-
4483
Supplying all materials, labour and T&P for fixing of 15mm to 25 mm dia SINGLE AIR VALVE including fitting of required PVC service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete.15mm dia Air valve
2
-
1467
Supplying all materials, labour, T&P for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with C.C. (1:4:8), CB Brick in C.M. (1:6), 12mm cement plaster with C.M. (1:4), RCC cover slab with CC 1:2:4 etc., and as per approved P.H. drawing and design etc., complete and direction of Engineer-in-charge.
14
-
8745
Supplying all materials, labour, T&P for construction of brick masonry Air Valve chambers of internal size 75x75x100cm with all lead royalty etc. such as earth work excavation, bed concrete with C.C. (1:4:8) CB Brick in C.M. (1:6), 12mm cement plaster with C.M. (1:4), RCC cover slab with C.C. 1:2:4 etc., and as per approved P.H. drawing and design etc., complete and direction of Engineer-in-charge.
2
-
6276
Constn. of 1000 ltrs capacity RCC Cistern for Govt. institutions as per specification and approved drawing including earth work excavation, bed concrete with C.C. (1:4:8), R.R. stone masonary in (1:6) C.M., C.C. (1:1½:3), 20 mm cement plaster in C.M. (1:6) over RR stone masonary work, 12 mm cement plaster in C.M. (1:4) over C.C. works and cement punning with supply & fitting fixing of all necessary pipe fittings from supply main pipe line to stand post etc. as per site requirement all complete and as per the direction of Engineer-in-charge.
3
-
15567
Providing FHTC by supplying & fitting fixing of all necessary pipes and fittings from supply main pipe line to delivery point post such as PVC Saddle, G.M. ferrule Cock , 15mm & 20mm G.I fittings, 15 mm CI Handle cock, 100 mm dia Preacst stanpost ( GI wire reinforced) of height 1.2m with base (300mmX300mmX150mm) holding 20 mm GI pipe and supplying of material & labor for laying of Service connection of 20 mm HDPE pipe of PE 80 PN 10.0 (@4 mtr for each house) etc. all complete and as per site requirement and as per the direction of Engineer-in-charge. (As per letter No.4998/ dated.31.07.2020 of EIC, RWS&S (O))
192
-
1842.42
CC Road Crossing (For the required houses opposite to the main pipe line) Supplying all labour and T&P for cutting cement concrete road for taking pipe line and making good to the damages with 12 mm size crusher broken chips concrete CC(1:2:4) including all cost, conveyance, royality of materials including watering, curing and ramming etc. including cost of 20mm HDPE pipe(PE-80, PN-10) & laying of pipe (3.75mtr), all complete and as per specification and direction of Engineer-in-charge. (using Cutter) (As per letter No.4998/ dated.31.07.2020 of EIC, RWS&S (O))
94
-
343
Supplying all materials, labour and T&P for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (Tata / Zindal/Bansal make) confirming to IS 1239(P.1)2004/IS:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of Engineer-in-charge to be used to cross drainage work including jointing with rubber insertion, nut and bolts, clamp making and fixing if required and providing necessary masonary support as per site condition and jointing to the water mains and providing scaffoldings as per directiobn of EIC 80 mm dia G.I. ( medium ) pipe
234
-
740.6
150 mm dia G.I. ( medium ) pipe
48
-
1608
100 mm dia G.I. ( medium ) pipe
48
-
1041
Providing flange to the GI pipe including cost of flange, welding using welding generator at site etc. Complete 80 mm dia G.I. ( medium ) flange
8
-
776
150 mm dia G.I. ( medium ) flange
2
-
1438
100 mm dia G.I. ( medium ) flange
2
-
935
Providing flanged joints to flanged pipe and fitting including testing of joint , cost of bolt & nutand rubber insertion etc. As per specification complete ( as per P.H. S/R 2.1.25)
6
-
125.2
Supplying all labour T&P for cutting GI pipes of following size at work site for making specials, welding of flanges, welding of pipes etc all complete as per the direction of Engineer-in-charge.
18
-
635.3
Supplying all labour, T&P for fillet welding to the GI Pipes of following size at work site by using welding generator including cost of welding materials and testing of Joints etc. all complete as per the direction Engineer-in-charge.
18
-
1096.9
GI Fittings 80mm dia x 900GI Bend of size (0.30 x 0.30)m
4
-
3966
GI Fittings 100mm dia x 900GI Bend of size (0.30 x 0.30)m
2
-
4953
150mm dia x 900GI Bend of size (0.30 x 0.30)m
1
-
7548
80mm dia G.I. "Z" Bend with D/F (0.50 X 1.50 x 0.50 mtr)
1
-
4434
100mm dia G.I. "Z" Bend with D/F (0.50 X 1.50 x 0.50 mtr)
1
-
5774
150mm dia G.I. "Z" Bend with D/F (0.50 X 1.50 x 0.50 mtr)
1
-
8902
80mm X 80mm x 80mm (A/F) G.I. Equal Tee (0.60 X 0.60 x 0.60 mtr)
1
-
4608
100mm X 100mm x 100mm All Flanged (A/F) G.I. Equal Tee (0.60 X 0.60 x 0.60 mtr)
1
-
5860
150mm X 150mm x 150mm All Flanged (A/F) G.I. Equal Tee (0.60 X 0.60 x 0.60 mtr)
1
-
9026
Supplying all materials, labour, T&P for Construction DISPLAY BOARD of size1.5M. X 1.5M.for writing necessary salient features of the work.
1
-
3840
Documentaion charges for the scheme
1
-
1000
PUMPING UNIT INSTALLATION Supplying , Testing , Installation and Commissiong of three phase 3 HP vertical submersible pumpset of reputed make (KSB, Kirloskar,CRI ) discharge 136-53 LPM, Head Range - 32-106 mtrs
1
-
22555.89
PUMPING UNIT INSTALLATION Supplying , Testing , Installation and Commissiong of three phase 2 HP vertical submersible pumpset of reputed make (KSB, Kirloskar,CRI ) discharge 130-39 LPM, Head Range - 25-181 mtrs
1
-
18561.29
Supplying, installation and testing of Suitable control panel board of reputed make with ISI/ ISO Certified (BCH, L&T, Havells, etc) for 3 HP three phase consisting C.R.C.A sheet with colour coating both side of the box and proper locking system, contactor, volt meter, ampere meter along with single phase preventer and weather proof auto manual switch, volt meter with selector switch including light ON & OFF switch for the above work with 3 Phase indicator Lamps.( one set standby)6.00-9.30amp.
2
-
6750
4mm2 3core flat submersible cable of reputed make with ISI/ ISO certified (reputed make etc.)
200
-
110.95
6 mm2 PVC coated steel wire rope of reputed make
120
-
25
Lowering of 50mm OD ISI marked, High Density Polyethylene (HDPE) pipes for water supply as per IS No. 4984/1995 (Reaffirmed 2002) PE 80 PN 08 inside the production well.
100
-
70.8
Supplying all materials, labour, T&P for laying, fitting and fixing of 32 mm dia HDPE pipe of PE 80 Grade and pressure rating PN 8.0 to be laid as a casing for 4mm2/6mm2 3core flat submersible cable in connection with pumping installation work, including earth work excavation of size 30cm width X 60Cm depth for HDPE Pipe line trench, duly inserting the above supplied flat submersible cable, refilling of the trenches, with electrical connections etc. all complete and as per site requirement and as per the direction of Engineer-in-charge.
100
-
83.98
Supplying, Fitting of 200mm dia C.I. Bore cover, 2set Suitable M.S Bore Clamp, with required accessories like G.I R/S fittings for jointing to water mains, stainless steel nipples, s/s nut bolt, wire rope clamp suitable to HDPE Pipe, G.I.bend, and nutbolts, and other tit bit items including jointing of cable etc required for connection to the rising main
2
-
5704
Providing chlorination arrangement with of required capacity with agitator, Dosing Pump etc. including cost of all materials, pipes, fittings, valves etc. including cost of installation etc. all complete.
1
-
40000
CONSTRUCTION OF BOUNDARY WALL Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
31.85
-
204.22
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
4.6
-
3844.4
Filling in plinth with selected sand in the areas within initial lead & lift, including cost of materials, labours, T&P etc. all complete as per the direction of the Engineer-in-charge.
4.6
-
285.6
Supplying all materials, labour, T&P and providing RR stone masonry in CM(1:6) in foundation & plinth including cost, carriage and royalty of all the materials etc all complete.
30.6
-
3187.4
Providing CB brick masonry in c.m. (1:6) for use in superstructure using. bricks of 230mm size including splays cutting, circular moulding, champering, corbelling, curing with all cost, conveyance, royalty of materials, labour, T&P etc. complete.
21.81
-
4037.9
Supplying all materials, labour, T&P and providing Cement concrete (1:2:4) with 12 mm size CBHG chips for RCC work including hoisting lowering & laying, cost, carriage, royalty and taxes of all materials etc all complete as per direction of EIC.
4.47
-
5619.4
Supplying, straightening, cutting, bending, binding, bent up coiled Tor steel and binding wires, binding, tying the grills, hoisting, lowering and placing in position including all cost, carriage, taxes, all labour, T&P etc. complete
3.58
-
8013.9
Providing CB brick masonry in c.m. (1:6) for use in superstructure using. bricks of 230mm size including splays cutting, circular moulding, champering, corbelling, curing with all cost, conveyance, royalty of materials, labour, T&P etc. complete. (for gate pillar)
2.53
-
4037.9
16mm thick cement plaster (1:6) over brick / stone masonry work including cost carriage and royality of all materials
287.48
-
195.2
Supplying all materials labour T&P and providing cement washing one coat to new plastered surface including transportation charges taxes etc all complete.
287.48
-
21.8
Supplying all materials labour T&P and finishing wall with water proffing cement paint of approved shed on new work two coats to give an even shade including cost of paints, taxes etc all complete as per direction of EIC.
287.48
-
32.4
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 3.00 kg / sqft )
360
-
72
Painting two coats with approved paint on new wood / iron work including cost of paint
9
-
189.8
Earth filling with excavated materials including watering and ramming etc all complete
2.85
-
113.46
Supplying all materials, labour, T&P and providing 2.50cm. thick DPC in Cement concrete (1:2:4) with 12 mm size CBHG chips for RCC work including hoisting lowering & laying, cost, carriage, royalty and taxes of all materials etc all complete as per direction of EIC.
25.2
-
268.1
Construction of pumphouse-Earth work excavation in foundation in all kind of soil within initial lead of 50m and lift of 1.5m including dressing and leveling the bed and depositing the materials away from the work site and breaking clods from 5cm to 7cm not exceeding 0.3m in depth etc.
7.75
-
204.22
Filling foundation and plinth with good river sand well watered and rammed including cost, conveyance, royalty, labour, T&P etc. complete.
3.29
-
285.6
Providing and laying PCC (1:4:8) in foundation using 4cm sizeHBG metal in foundation including laying in layers not exceeding 22.5cm thick with watering and curring for 28 days with cost, conveyance royalities and taxes etc. complete.
1.87
-
3844.4
RR stone masonry in CM (1:6) for F&P all complete including all cost, conveyance,taxes,royality etc.complete.
9.88
-
3187.4
Earth filling in foundation and plinth with excavated earth with initial lead & lift
2.58
-
113.46
Providing fly ash brick masonry in c.m. (1:6) for use in superstructure using. bricks of 230mm size including splays cutting, circular moulding, champering, corbelling, curing with all cost, conveyance, royalty of materials, labour, T&P etc. complete.
8.76
-
4037.9
Reinforced cement concrete (1:2:4) with 12mm size black hard crusher broken granite chips including laying in position compacting to proper design section but excluding cost of tor steel rod and labour charges for cutting, bending, binding and tying the grills etc.
2.08
-
5619.4
Rigid and smooth centering and shuttering for RCC work including false works and dismentling then after casting etc.complete. Plinth
2.58
-
104.5
Liintel
2.58
-
270
Chujjja,roof slab
14.8
-
437.1
Supplying, straightening, cutting, bending, binding, bent up coiled Tor steel and binding wires, binding, tying the grills, hoisting, lowering and placing in position including all cost, carriage, taxes, all labour, T&P etc. complete including cost of MS grills etc.
1.87
-
8018.9
12mm thick cement plaster in c.m. (1:6) to wall surface with cost, conveyance, royalty, all taxes, labour including watering and curing, T&P etc. complete.
79.38
-
136.5
20mm(3/4") thick C.P. with C.M.(1:6) over Stone masonary including all cost, conveyance,taxes,royality etc.complete.
14.72
-
204.9
2.5 cm thick AS flooring with CC 1:2:4 using HG chips including punning.
11.88
-
296.6
Cost of M.S.Doors & Windows
100
-
72
Labour charge for fixing of M.S. door & windows in position with welded holdfasts complete
2
-
82
Painting two coats with approved paint over door & windows incl. cost of all materials etc. complete
7.7
-
189.8
Wall painting two coats withplastic emulsion paints of approved shade of new work to give an even shade incuding cost of paint.over a coat of white wash including all cost, royality etc.complete.
41.35
-
85.5
Supplying all materials, labour, T&P for providing Distempering two coats of approved shade on new work including cost of distemper (Per 10 sqm)
41.82
-
72.19
Supplying all materials, labour and T&P for wall writing with appropriate size of letters for displaying different salient features on pump house complete as per direction of Engineer-in-charge
25
-
100
Construction of 50,000 LTR OHT WITH 15M STAGING
Supplying of all labour,T&P,material including taxes for soil testing ,supply of approved design, drawing , construction,errection,testing & commissioning etc. of RCC elevated storage reservoir of 50,000 ltrs capacity with necessary staging height of 15 mtr, consisting of minimum 6 nos RCC columns and cylindrical container with circular dome with raft foundation as applicable using CC M-25 with sand and pcc layer below foundation, as per approved drawing, excluding in-let,out-let,over flow & washing line of ESR,use of 32 mm Stainless steel pipe for Staircase hand Railing, Gallery and Stainless steel ladder inside and outside the ESR,CI puddle collar of suitable size,0.6 m dia CI manhole cover at dome , RCC vent with jally, lightening arrestor and water level indicator etc. and wall writing complete as per direction of the Engineer - in- Charge.
1
-
1898984
Comprehensive operation & maintenance for 05years
5
-
60802.46
PWS TO BADAKOTURU & SANAKOTURU-- Laying of Pipelines , Construction of Valve Chambers, Stand posts, Drinking Water supply provision to School / AWC & individual household connections etc. Supplying all labour and T&P for earth work in all kinds of soil within 50 M initial lead and 1.5 M initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of Engineer –in-charge.
2189.58
-
204.22
Supplying all materials, labour , T&P for laying of following HDPE pipes of PE-80& PN-8 pressure rating conforming to IS4984-1995 &specials of following outside diametre and class-4 to class-5 and jointing by fusion welding method including testing as per specification complete as per direction of Engineer-in-charge 160mm dia O.D. HDPE. Pipe (Including pipe cost) PE80, PN-08
1000
-
1333.5
110 mm dia O.D. HDPE. Pipe (Including pipe cost) PE80, PN-08
960
-
739.7
90 mm dia O.D. HDPE. Pipe (Including pipe cost) PE80, PN-08
3565
-
538.6
Supplying all labour, T&P for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of Engineer-in-charge.
2137.7
-
113.46
Supplying all labor T&P for Dismentling and removing Cement Concrete works etc.& depositing the usable materials with in initial lead & lift
72
-
585.4
Supplying all materials , labour ,T.&.P & providing C.C.work for making good to the dismentaled C.C. (1:4:8) during laying of pipeline etc as per the direction of the Engineer in Charge.
36
-
3844.4
Supplying all materials , labour ,T.&.P & providing C.C.work for making good to the dismentaled C.C. (1:2:4) during laying of pipeline etc as per the direction of the Engineer in Charge.
36
-
5619.4
Supplying all labour and T&P for cutting metal road for taking pipe line and making good to the damages T&P etc., complete and as per direction of Engineer-in-charge.
300
-
312
Supplying all materials, labour and T&P for fixing of following sizes of C.I. SLUICE / NON RETURN VALVES with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete.150mm dia S.V
2
-
9793
80 mm dia S.V.
10
-
4620
100 mm dia S.V.
5
-
6271
80 mm dia N.R.V.
1
-
4483
Supplying all materials, labour and T&P for fixing of 15mm to 25 mm dia SINGLE AIR VALVE including fitting of required PVC service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete.15mm dia Air valve
2
-
1467
Supplying all materials, labour, T&P for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with C.C. (1:4:8), CB Brick in C.M. (1:6), 12mm cement plaster with C.M. (1:4), RCC cover slab with CC 1:2:4 etc., and as per approved P.H. drawing and design etc., complete and direction of Engineer-in-charge.
18
-
8745
Supplying all materials, labour, T&P for construction of brick masonry Air Valve chambers of internal size 75x75x100cm with all lead royalty etc. such as earth work excavation, bed concrete with C.C. (1:4:8) CB Brick in C.M. (1:6), 12mm cement plaster with C.M. (1:4), RCC cover slab with C.C. 1:2:4 etc., and as per approved P.H. drawing and design etc., complete and direction of Engineer-in-charge.
2
-
6276
Constn. of 1000 ltrs capacity RCC Cistern for Govt. institutions as per specification and approved drawing including earth work excavation, bed concrete with C.C. (1:4:8), R.R. stone masonary in (1:6) C.M., C.C. (1:1½:3), 20 mm cement plaster in C.M. (1:6) over RR stone masonary work, 12 mm cement plaster in C.M. (1:4) over C.C. works and cement punning with supply & fitting fixing of all necessary pipe fittings from supply main pipe line to stand post etc. as per site requirement all complete and as per the direction of Engineer-in-charge.
3
-
15567
Providing FHTC by supplying & fitting fixing of all necessary pipes and fittings from supply main pipe line to delivery point post such as PVC Saddle, G.M. ferrule Cock , 15mm & 20mm G.I fittings, 15 mm CI Handle cock, 100 mm dia Preacst stanpost ( GI wire reinforced) of height 1.2m with base (300mmX300mmX150mm) holding 20 mm GI pipe and supplying of material & labor for laying of Service connection of 20 mm HDPE pipe of PE 80 PN 10.0 (@4 mtr for each house) etc. all complete and as per site requirement and as per the direction of Engineer-in-charge. (As per letter No.4998/ dated.31.07.2020 of EIC, RWS&S (O))
608
-
1842.42
CC Road Crossing (For the required houses opposite to the main pipe line) Supplying all labour and T&P for cutting cement concrete road for taking pipe line and making good to the damages with 12 mm size crusher broken chips concrete CC(1:2:4) including all cost, conveyance, royality of materials including watering, curing and ramming etc. including cost of 20mm HDPE pipe(PE-80, PN-10) & laying of pipe (3.75mtr), all complete and as per specification and direction of Engineer-in-charge. (using Cutter) (As per letter No.4998/ dated.31.07.2020 of EIC, RWS&S (O))
299
-
343
Supplying all materials, labour and T&P for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (Tata / Zindal/Bansal make) confirming to IS 1239(P.1)2004/IS:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of Engineer-in-charge to be used to cross drainage work including jointing with rubber insertion, nut and bolts, clamp making and fixing if required and providing necessary masonary support as per site condition and jointing to the water mains and providing scaffoldings as per directiobn of EIC 80 mm dia G.I. ( medium ) pipe
48
-
740.6
100 mm dia G.I. ( medium ) pipe
48
-
1041
150 mm dia G.I. ( medium ) pipe
300
-
1608
Providing flange to the GI pipe including cost of flange, welding using welding generator at site etc. Complete 80 mm dia G.I. ( medium ) flange
2
-
776
100 mm dia G.I. ( medium ) flange
2
-
935
150 mm dia G.I. ( medium ) flange
10
-
1438
Providing flanged joints to flanged pipe and fitting including testing of joint , cost of bolt & nutand rubber insertion etc. As per specification complete ( as per P.H. S/R 2.1.25)
7
-
125.2
Supplying all labour T&P for cutting GI pipes of following size at work site for making specials, welding of flanges, welding of pipes etc all complete as per the direction of Engineer-in-charge.
45
-
635.3
Supplying all labour, T&P for fillet welding to the GI Pipes of following size at work site by using welding generator including cost of welding materials and testing of Joints etc. all complete as per the direction Engineer-in-charge.
45
-
1096.9
GI Fittings 80mm dia x 900GI Bend of size (0.30 x 0.30)m
4
-
3966
100mm dia x 900GI Bend of size (0.30 x 0.30)m
2
-
4953
150mm dia x 900GI Bend of size (0.30 x 0.30)m
1
-
7548
80mm dia G.I. "Z" Bend with D/F (0.50 X 1.50 x 0.50 mtr)
1
-
4434
100mm dia G.I. "Z" Bend with D/F (0.50 X 1.50 x 0.50 mtr)
1
-
5774
150mm dia G.I. "Z" Bend with D/F (0.50 X 1.50 x 0.50 mtr)
1
-
8902
80mm X 80mm x 80mm (A/F) G.I. Equal Tee (0.60 X 0.60 x 0.60 mtr)
1
-
4608
100mm X 100mm x 100mm All Flanged (A/F) G.I. Equal Tee (0.60 X 0.60 x 0.60 mtr)
1
-
5860
150mm X 150mm x 150mm All Flanged (A/F) G.I. Equal Tee (0.60 X 0.60 x 0.60 mtr)
1
-
9026
Supplying all materials, labour, T&P for Construction DISPLAY BOARD of size1.5M. X 1.5M.for writing necessary salient features of the work.
1
-
3840
Documentaion charges for the scheme
1
-
1000
Construction of 1,50,000 LTR OHT WITH 15M STAGING
Supplying of all labour,T&P,material including taxes for soil testing ,supply of approved design, drawing , construction,errection,testing & commissioning etc. of RCC elevated storage reservoir of 1,50,000 ltrs capacity with necessary staging height of 15 mtr, consisting of minimum 6 nos RCC columns and cylindrical container with circular dome with raft foundation as applicable using CC M-25 with sand and pcc layer below foundation, as per approved drawing, excluding in-let,out-let,over flow & washing line of ESR,use of 32 mm Stainless steel pipe for Staircase hand Railing, Gallery and Stainless steel ladder inside and outside the ESR,CI puddle collar of suitable size,0.6 m dia CI manhole cover at dome , RCC vent with jally, lightening arrestor and water level indicator etc. and wall writing complete as per direction of the Engineer - in- Charge.
1
-
3382052
CONSTRUCTION OF BOUNDARY WALL Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
26.6
-
204.22
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
3.85
-
3844.4
Filling in plinth with selected sand in the areas within initial lead & lift, including cost of materials, labours, T&P etc. all complete as per the direction of the Engineer-in-charge.
3.85
-
285.6
Supplying all materials, labour, T&P and providing RR stone masonry in CM(1:6) in foundation & plinth including cost, carriage and royalty of all the materials etc all complete.
25.5
-
3187.4
Providing CB brick masonry in c.m. (1:6) for use in superstructure using. bricks of 230mm size including splays cutting, circular moulding, champering, corbelling, curing with all cost, conveyance, royalty of materials, labour, T&P etc. complete.
17.94
-
4037.9
Supplying all materials, labour, T&P and providing Cement concrete (1:2:4) with 12 mm size CBHG chips for RCC work including hoisting lowering & laying, cost, carriage, royalty and taxes of all materials etc all complete as per direction of EIC.
4.13
-
5619.4
Supplying, straightening, cutting, bending, binding, bent up coiled Tor steel and binding wires, binding, tying the grills, hoisting, lowering and placing in position including all cost, carriage, taxes, all labour, T&P etc. complete
3.3
-
8018.9
Providing CB brick masonry in c.m. (1:6) for use in superstructure using. bricks of 230mm size including splays cutting, circular moulding, champering, corbelling, curing with all cost, conveyance, royalty of materials, labour, T&P etc. complete. (for gate pillar)
2.32
-
4037.9
16mm thick cement plaster (1:6) over brick / stone masonry work including cost carriage and royality of all materials
238.58
-
195.2
Supplying all materials labour T&P and providing cement washing one coat to new plastered surface including transportation charges taxes etc all complete.
238.58
-
21.8
Supplying all materials labour T&P and finishing wall with water proffing cement paint of approved shed on new work two coats to give an even shade including cost of paints, taxes etc all complete as per direction of EIC.
238.58
-
32.4
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 3.00 kg / sqft )
360
-
72
Painting two coats with approved paint on new wood / iron work including cost of paint
9
-
189.8
Earth filling with excavated materials including watering and ramming etc all complete
2.4
-
113.46
Supplying all materials, labour, T&P and providing 2.5 cm DPC with CC(1:2:4) using 12 mm size HG chips.including cost, carriage and royalty of all materials etc all complete. (Per 1 Sqm)
20.7
-
268.1
PUMPING UNIT INSTALLATION Supplying , Testing , Installation and Commissiong of three phase 3 HP vertical submersible pumpset of reputed make (KSB, Kirloskar,CRI ) discharge 136-53 LPM, Head Range - 32-106 mtrs
1
-
22555.89
Supplying, installation and testing of Suitable control panel board of reputed make with ISI/ ISO Certified (BCH, L&T, Havells, etc) for 3 HP three phase consisting C.R.C.A sheet with colour coating both side of the box and proper locking system, contactor, volt meter, ampere meter along with single phase preventer and weather proof auto manual switch, volt meter with selector switch including light ON & OFF switch for the above work with 3 Phase indicator Lamps.( one set standby)6.00-9.30amp.
1
-
6750
4mm2 3core flat submersible cable of reputed make with ISI/ ISO certified (reputed make etc.)
100
-
110.95
6 mm2 PVC coated steel wire rope of reputed make
60
-
25
Lowering of 50mm OD ISI marked, High Density Polyethylene (HDPE) pipes for water supply as per IS No. 4984/1995 (Reaffirmed 2002) PE 80 PN 08 inside the production well.
50
-
70.8
Supplying all materials, labour, T&P for laying, fitting and fixing of 32 mm dia HDPE pipe of PE 80 Grade and pressure rating PN 8.0 to be laid as a casing for 4mm2/6mm2 3core flat submersible cable in connection with pumping installation work, including earth work excavation of size 30cm width X 60Cm depth for HDPE Pipe line trench, duly inserting the above supplied flat submersible cable, refilling of the trenches, with electrical connections etc. all complete and as per site requirement and as per the direction of Engineer-in-charge.
50
-
83.98
Supplying, Fitting of 200mm dia C.I. Bore cover, 2set Suitable M.S Bore Clamp, with required accessories like G.I R/S fittings for jointing to water mains, stainless steel nipples, s/s nut bolt, wire rope clamp suitable to HDPE Pipe, G.I.bend, and nutbolts, and other tit bit items including jointing of cable etc required for connection to the rising main
1
-
5704
Providing chlorination arrangement with of required capacity with agitator, Dosing Pump etc. including cost of all materials, pipes, fittings, valves etc. including cost of installation etc. all complete.
1
-
40000
Comprehensive operation & maintenance for 05years
5
-
112195.79
PWS TO RAMACHANDRAPUR- Laying of Pipelines , Construction of Valve Chambers, Stand posts, Drinking Water supply provision to School / AWC & individual household connections etc. Supplying all labour and T&P for earth work in all kinds of soil within 50 M initial lead and 1.5 M initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of Engineer –in-charge.
670.37
-
204.22
Supplying all materials, labour , T&P for laying of following HDPE pipes of PE-80& PN-8 pressure rating conforming to IS4984-1995 &specials of following outside diametre and class-4 to class-5 and jointing by fusion welding method including testing as per specification complete as per direction of Engineer-in-charge 110mm dia O.D. HDPE. Pipe (Including pipe cost) PE80, PN-08
185
-
739.7
90 mm dia O.D. HDPE. Pipe (Including pipe cost) PE80, PN-08
1600
-
538.6
Supplying all labour, T&P for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of Engineer-in-charge.
658.43
-
113.46
Supplying all labor T&P for Dismentling and removing Cement Concrete works etc.& depositing the usable materials with in initial lead & lift
24
-
585.4
Supplying all materials , labour ,T.&.P & providing C.C.work for making good to the dismentaled C.C. (1:4:8) during laying of pipeline etc as per the direction of the Engineer in Charge.
12
-
3844.4
Supplying all materials , labour ,T.&.P & providing C.C.work for making good to the dismentaled C.C. (1:2:4) during laying of pipeline etc as per the direction of the Engineer in Charge.
12
-
5619.4
Supplying all materials, labour and T&P for fixing of following sizes of C.I. SLUICE / NON RETURN VALVES with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete.80mm dia S.V
7
-
4620
Supplying all materials, labour and T&P for fixing of following sizes of C.I. SLUICE / NON RETURN VALVES with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete.100mm dia S.V
1
-
6271
80 mm dia N.R.V.
2
-
4483
Supplying all materials, labour and T&P for fixing of 15mm to 25 mm dia SINGLE AIR VALVE including fitting of required PVC service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete.15mm dia Air valve
2
-
1467
Supplying all materials, labour, T&P for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with C.C. (1:4:8), CB Brick in C.M. (1:6), 12mm cement plaster with C.M. (1:4), RCC cover slab with CC 1:2:4 etc., and as per approved P.H. drawing and design etc., complete and direction of Engineer-in-charge.
10
-
8745
Supplying all materials, labour, T&P for construction of brick masonry Air Valve chambers of internal size 75x75x100cm with all lead royalty etc. such as earth work excavation, bed concrete with C.C. (1:4:8) CB Brick in C.M. (1:6), 12mm cement plaster with C.M. (1:4), RCC cover slab with C.C. 1:2:4 etc., and as per approved P.H. drawing and design etc., complete and direction of Engineer-in-charge.
2
-
6276
Constn. of 1000 ltrs capacity RCC Cistern for Govt. institutions as per specification and approved drawing including earth work excavation, bed concrete with C.C. (1:4:8), R.R. stone masonary in (1:6) C.M., C.C. (1:1½:3), 20 mm cement plaster in C.M. (1:6) over RR stone masonary work, 12 mm cement plaster in C.M. (1:4) over C.C. works and cement punning with supply & fitting fixing of all necessary pipe fittings from supply main pipe line to stand post etc. as per site requirement all complete and as per the direction of Engineer-in-charge.
1
-
15567
Providing FHTC by supplying & fitting fixing of all necessary pipes and fittings from supply main pipe line to delivery point post such as PVC Saddle, G.M. ferrule Cock , 15mm & 20mm G.I fittings, 15 mm CI Handle cock, 100 mm dia Preacst stanpost ( GI wire reinforced) of height 1.2m with base (300mmX300mmX150mm) holding 20 mm GI pipe and supplying of material & labor for laying of Service connection of 20 mm HDPE pipe of PE 80 PN 10.0 (@4 mtr for each house) etc. all complete and as per site requirement and as per the direction of Engineer-in-charge. (As per letter No.4998/ dated.31.07.2020 of EIC, RWS&S (O))
112
-
1842.42
CC Road Crossing (For the required houses opposite to the main pipe line) Supplying all labour and T&P for cutting cement concrete road for taking pipe line and making good to the damages with 12 mm size crusher broken chips concrete CC(1:2:4) including all cost, conveyance, royality of materials including watering, curing and ramming etc. including cost of 20mm HDPE pipe(PE-80, PN-10) & laying of pipe (3.75mtr), all complete and as per specification and direction of Engineer-in-charge. (using Cutter) (As per letter No.4998/ dated.31.07.2020 of EIC, RWS&S (O))
51
-
343
Supplying all materials, labour and T&P for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (Tata / Zindal/Bansal make) confirming to IS 1239(P.1)2004/IS:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of Engineer-in-charge to be used to cross drainage work including jointing with rubber insertion, nut and bolts, clamp making and fixing if required and providing necessary masonary support as per site condition and jointing to the water mains and providing scaffoldings as per directiobn of EIC 80 mm dia G.I. ( medium ) pipe
108
-
740.6
100 mm dia G.I. ( medium ) pipe
54
-
1041
Providing flange to the GI pipe including cost of flange, welding using welding generator at site etc. Complete 80 mm dia G.I. ( medium ) flange
4
-
776
100 mm dia G.I. ( medium ) flange
2
-
935
Providing flanged joints to flanged pipe and fitting including testing of joint , cost of bolt & nutand rubber insertion etc. As per specification complete ( as per P.H. S/R 2.1.25)
3
-
125.2
Supplying all labour T&P for cutting GI pipes of following size at work site for making specials, welding of flanges, welding of pipes etc all complete as per the direction of Engineer-in-charge.
10
-
635.3
Supplying all labour, T&P for fillet welding to the GI Pipes of following size at work site by using welding generator including cost of welding materials and testing of Joints etc. all complete as per the direction Engineer-in-charge.
10
-
1096.9
GI Fittings 80mm dia x 900GI Bend of size (0.30 x 0.30)m
2
-
3966
100mm dia x 900GI Bend of size (0.30 x 0.30)m
1
-
4953
80mm dia G.I. "Z" Bend with D/F (0.50 X 1.50 x 0.50 mtr)
1
-
4434
100mm dia G.I. "Z" Bend with D/F (0.50 X 1.50 x 0.50 mtr)
1
-
5774
80mm X 80mm x 80mm (A/F) G.I. Equal Tee (0.60 X 0.60 x 0.60 mtr)
1
-
4608
100mm X 100mm x 100mm All Flanged (A/F) G.I. Equal Tee (0.60 X 0.60 x 0.60 mtr)
1
-
5860
Supplying all materials, labour, T&P for Construction DISPLAY BOARD of size1.5M. X 1.5M.for writing necessary salient features of the work.
1
-
3840
Documentaion charges for the scheme
1
-
1000
CONSTRUCTION OF BOUNDARY WALL Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
26.6
-
204.22
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
3.85
-
3844.4
Filling in plinth with selected sand in the areas within initial lead & lift, including cost of materials, labours, T&P etc. all complete as per the direction of the Engineer-in-charge.
3.85
-
285.6
Supplying all materials, labour, T&P and providing RR stone masonry in CM(1:6) in foundation & plinth including cost, carriage and royalty of all the materials etc all complete.
25.5
-
3187.4
Providing CB brick masonry in c.m. (1:6) for use in superstructure using. bricks of 230mm size including splays cutting, circular moulding, champering, corbelling, curing with all cost, conveyance, royalty of materials, labour, T&P etc. complete.
17.94
-
4037.9
Supplying all materials, labour, T&P and providing Cement concrete (1:2:4) with 12 mm size CBHG chips for RCC work including hoisting lowering & laying, cost, carriage, royalty and taxes of all materials etc all complete as per direction of EIC.
4.13
-
5619.4
Supplying, straightening, cutting, bending, binding, bent up coiled Tor steel and binding wires, binding, tying the grills, hoisting, lowering and placing in position including all cost, carriage, taxes, all labour, T&P etc. complete
3.3
-
8018.9
Providing CB brick masonry in c.m. (1:6) for use in superstructure using. bricks of 230mm size including splays cutting, circular moulding, champering, corbelling, curing with all cost, conveyance, royalty of materials, labour, T&P etc. complete. (for gate pillar)
2.32
-
4037.9
16mm thick cement plaster (1:6) over brick / stone masonry work including cost carriage and royality of all materials
238.58
-
195.2
Supplying all materials labour T&P and providing cement washing one coat to new plastered surface including transportation charges taxes etc all complete.
238.58
-
21.8
Supplying all materials labour T&P and finishing wall with water proffing cement paint of approved shed on new work two coats to give an even shade including cost of paints, taxes etc all complete as per direction of EIC.
238.58
-
32.4
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 3.00 kg / sqft )
360
-
72
Painting two coats with approved paint on new wood / iron work including cost of paint
9
-
189.8
Earth filling with excavated materials including watering and ramming etc all complete
2.4
-
113.46
Supplying all materials, labour, T&P and providing 2.5 cm DPC with CC(1:2:4) using 12 mm size HG chips.including cost, carriage and royalty of all materials etc all complete. (Per 1 Sqm)
20.7
-
268.1
PUMPING UNIT INSTALLATION Supplying , Testing , Installation and Commissiong of three phase 3 HP vertical submersible pumpset of reputed make (KSB, Kirloskar,CRI ) discharge 136-53 LPM, Head Range - 32-106 mtrs
1
-
22555.89
Supplying, installation and testing of Suitable control panel board of reputed make with ISI/ ISO Certified (BCH, L&T, Havells, etc) for 3 HP three phase consisting C.R.C.A sheet with colour coating both side of the box and proper locking system, contactor, volt meter, ampere meter along with single phase preventer and weather proof auto manual switch, volt meter with selector switch including light ON & OFF switch for the above work with 3 Phase indicator Lamps.( one set standby)6.00-9.30amp.
1
-
6750
4mm2 3core flat submersible cable of reputed make with ISI/ ISO certified (reputed make etc.)
100
-
110.95
6 mm2 PVC coated steel wire rope of reputed make
60
-
25
Lowering of 50mm OD ISI marked, High Density Polyethylene (HDPE) pipes for water supply as per IS No. 4984/1995 (Reaffirmed 2002) PE 80 PN 08 inside the production well.
50
-
70.8
Supplying all materials, labour, T&P for laying, fitting and fixing of 32 mm dia HDPE pipe of PE 80 Grade and pressure rating PN 8.0 to be laid as a casing for 4mm2/6mm2 3core flat submersible cable in connection with pumping installation work, including earth work excavation of size 30cm width X 60Cm depth for HDPE Pipe line trench, duly inserting the above supplied flat submersible cable, refilling of the trenches, with electrical connections etc. all complete and as per site requirement and as per the direction of Engineer-in-charge.
50
-
83.98
Supplying, Fitting of 200mm dia C.I. Bore cover, 2set Suitable M.S Bore Clamp, with required accessories like G.I R/S fittings for jointing to water mains, stainless steel nipples, s/s nut bolt, wire rope clamp suitable to HDPE Pipe, G.I.bend, and nutbolts, and other tit bit items including jointing of cable etc required for connection to the rising main
1
-
5704
Providing chlorination arrangement with of required capacity with agitator, Dosing Pump etc. including cost of all materials, pipes, fittings, valves etc. including cost of installation etc. all complete.
1
-
40000
Construction of 30,000 LTR OHT WITH 15M STAGING
Supplying of all labour,T&P,material including taxes for soil testing ,supply of approved design, drawing , construction,errection,testing & commissioning etc. of RCC elevated storage reservoir of 30,000 ltrs capacity with necessary staging height of 15 mtr, consisting of minimum 6 nos RCC columns and cylindrical container with circular dome with raft foundation as applicable using CC M-25 with sand and pcc layer below foundation, as per approved drawing, excluding in-let,out-let,over flow & washing line of ESR,use of 32 mm Stainless steel pipe for Staircase hand Railing, Gallery and Stainless steel ladder inside and outside the ESR,CI puddle collar of suitable size,0.6 m dia CI manhole cover at dome , RCC vent with jally, lightening arrestor and water level indicator etc. and wall writing complete as per direction of the Engineer - in- Charge.
1
-
1455513
Comprehensive operation & maintenance for 05years
5
-
38029.22
PWS TO TAMPARAKAITHA- Laying of Pipelines , Construction of Valve Chambers, Stand posts, Drinking Water supply provision to School / AWC & individual household connections etc.Supplying all labour and T&P for earth work in all kinds of soil within 50 M initial lead and 1.5 M initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of Engineer –in-charge.
319.18
-
204.22
Supplying all materials, labour , T&P for laying of following HDPE pipes of PE-80& PN-8 pressure rating conforming to IS4984-1995 &specials of following outside diametre and class-4 to class-5 and jointing by fusion welding method including testing as per specification complete as per direction of Engineer-in-charge 110mm dia O.D. HDPE. Pipe (Including pipe cost) PE80, PN-08
160
-
739.7
90 mm dia O.D. HDPE. Pipe (Including pipe cost) PE80, PN-08
555
-
538.6
160 mm dia O.D. HDPE. Pipe (Including pipe cost) PE80, PN-08
110
-
1333.5
Supplying all labour, T&P for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of Engineer-in-charge.
311.92
-
113.46
Supplying all labor T&P for Dismentling and removing Cement Concrete works etc.& depositing the usable materials with in initial lead & lift
15
-
585.4
Supplying all materials , labour ,T.&.P & providing C.C.work for making good to the dismentaled C.C. (1:4:8) during laying of pipeline etc as per the direction of the Engineer in Charge.
7.5
-
3844.4
Supplying all materials , labour ,T.&.P & providing C.C.work for making good to the dismentaled C.C. (1:2:4) during laying of pipeline etc as per the direction of the Engineer in Charge.
7.5
-
5619.4
Supplying all labour and T&P for cutting metal road for taking pipe line and making good to the damages T&P etc., complete and as per direction of Engineer-in-charge.
50
-
312
Supplying all materials, labour and T&P for fixing of following sizes of C.I. SLUICE / NON RETURN VALVES with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete.100mm dia S.V
2
-
6271
80 mm dia S.V.
2
-
4620
150 mm dia S.V.
1
-
9793
80 mm dia N.R.V.
2
-
4483
Supplying all materials, labour and T&P for fixing of 15mm to 25 mm dia SINGLE AIR VALVE including fitting of required PVC service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete.15mm dia Air valve
2
-
1467
Supplying all materials, labour, T&P for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with C.C. (1:4:8), CB Brick in C.M. (1:6), 12mm cement plaster with C.M. (1:4), RCC cover slab with CC 1:2:4 etc., and as per approved P.H. drawing and design etc., complete and direction of Engineer-in-charge.
7
-
8745
Supplying all materials, labour, T&P for construction of brick masonry Air Valve chambers of internal size 75x75x100cm with all lead royalty etc. such as earth work excavation, bed concrete with C.C. (1:4:8) CB Brick in C.M. (1:6), 12mm cement plaster with C.M. (1:4), RCC cover slab with C.C. 1:2:4 etc., and as per approved P.H. drawing and design etc., complete and direction of Engineer-in-charge.
2
-
6276
Constn. of 1000 ltrs capacity RCC Cistern for Govt. institutions as per specification and approved drawing including earth work excavation, bed concrete with C.C. (1:4:8), R.R. stone masonary in (1:6) C.M., C.C. (1:1½:3), 20 mm cement plaster in C.M. (1:6) over RR stone masonary work, 12 mm cement plaster in C.M. (1:4) over C.C. works and cement punning with supply & fitting fixing of all necessary pipe fittings from supply main pipe line to stand post etc. as per site requirement all complete and as per the direction of Engineer-in-charge.
3
-
15567
Supplying all materials, labour and T&P for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (Tata / Zindal/Bansal make) confirming to IS 1239(P.1)2004/IS:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of Engineer-in-charge to be used to cross drainage work including jointing with rubber insertion, nut and bolts, clamp making and fixing if required and providing necessary masonary support as per site condition and jointing to the water mains and providing scaffoldings as per directiobn of EIC 80 mm dia G.I. ( medium ) pipe
100
-
740.6
100 mm dia G.I. ( medium ) pipe
60
-
1041
150 mm dia G.I. ( medium ) pipe
30
-
1608
Providing flange to the GI pipe including cost of flange, welding using welding generator at site etc. Complete 80 mm dia G.I. ( medium ) flange
4
-
776
100 mm dia G.I. ( medium ) flange
2
-
935
150 mm dia G.I. ( medium ) flange
2
-
1438
Providing flanged joints to flanged pipe and fitting including testing of joint , cost of bolt & nutand rubber insertion etc. As per specification complete ( as per P.H. S/R 2.1.25)
3
-
125.2
Supplying all labour T&P for cutting GI pipes of following size at work site for making specials, welding of flanges, welding of pipes etc all complete as per the direction of Engineer-in-charge.
15
-
635.3
Supplying all labour, T&P for fillet welding to the GI Pipes of following size at work site by using welding generator including cost of welding materials and testing of Joints etc. all complete as per the direction Engineer-in-charge.
15
-
1096.9
80mm dia x 900GI Bend of size (0.30 x 0.30)m
2
-
3966
100mm dia x 900GI Bend of size (0.30 x 0.30)m
1
-
4953
150mm dia x 900GI Bend of size (0.30 x 0.30)m
1
-
7548
80mm dia G.I. "Z" Bend with D/F (0.50 X 1.50 x 0.50 mtr)
1
-
4434
100mm dia G.I. "Z" Bend with D/F (0.50 X 1.50 x 0.50 mtr)
1
-
5774
150mm dia G.I. "Z" Bend with D/F (0.50 X 1.50 x 0.50 mtr)
1
-
8902
80mm X 80mm x 80mm All Flanged (A/F) G.I. Equal Tee (0.60 X 0.60 x 0.60 mtr)
1
-
4608
100mm X 100mm x 100mm All Flanged (A/F) G.I. Equal Tee (0.60 X 0.60 x 0.60 mtr)
1
-
5860
150mm X 150mm x 150mm All Flanged (A/F) G.I. Equal Tee (0.60 X 0.60 x 0.60 mtr)
1
-
9026
Supplying all materials, labour, T&P for Construction DISPLAY BOARD of size1.5M. X 1.5M.for writing necessary salient features of the work.
1
-
3840
Documentaion charges for the scheme
1
-
1000
PUMPING UNIT INSTALLATION Supplying , Testing , Installation and Commissiong of three phase 3 HP vertical submersible pumpset of reputed make (KSB, Kirloskar,CRI ) discharge 1005-383 LPM, Head Range - 10-30 mtrs
1
-
33557.48
PUMPING UNIT INSTALLATION Supplying , Testing , Installation and Commissiong of three phase 3 HP vertical submersible pumpset of reputed make (KSB, Kirloskar,CRI ) discharge 136-53 LPM, Head Range - 32-106 mtrs
1
-
22555.89
Supplying, installation and testing of Suitable control panel board of reputed make with ISI/ ISO Certified (BCH, L&T, Havells, etc) for 3 HP three phase consisting C.R.C.A sheet with colour coating both side of the box and proper locking system, contactor, volt meter, ampere meter along with single phase preventer and weather proof auto manual switch, volt meter with selector switch including light ON & OFF switch for the above work with 3 Phase indicator Lamps.( one set standby)6.00-9.30amp.
2
-
6750
4mm2 3core flat submersible cable of reputed make with ISI/ ISO certified (reputed make etc.)
200
-
110.95
6 mm2 PVC coated steel wire rope of reputed make
120
-
25
Lowering of 50mm OD ISI marked, High Density Polyethylene (HDPE) pipes for water supply as per IS No. 4984/1995 (Reaffirmed 2002) PE 80 PN 08 inside the production well.
100
-
70.8
Supplying all materials, labour, T&P for laying, fitting and fixing of 32 mm dia HDPE pipe of PE 80 Grade and pressure rating PN 8.0 to be laid as a casing for 4mm2/6mm2 3core flat submersible cable in connection with pumping installation work, including earth work excavation of size 30cm width X 60Cm depth for HDPE Pipe line trench, duly inserting the above supplied flat submersible cable, refilling of the trenches, with electrical connections etc. all complete and as per site requirement and as per the direction of Engineer-in-charge.
100
-
83.98
Supplying, Fitting of 200mm dia C.I. Bore cover, 2set Suitable M.S Bore Clamp, with required accessories like G.I R/S fittings for jointing to water mains, stainless steel nipples, s/s nut bolt, wire rope clamp suitable to HDPE Pipe, G.I.bend, and nutbolts, and other tit bit items including jointing of cable etc required for connection to the rising main
2
-
5704
Providing chlorination arrangement with of required capacity with agitator, Dosing Pump etc. including cost of all materials, pipes, fittings, valves etc. including cost of installation etc. all complete.
1
-
40000
CONSTRUCTION OF BOUNDARY WALL Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
31.85
-
204.22
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
4.6
-
3844.4
Filling in plinth with selected sand in the areas within initial lead & lift, including cost of materials, labours, T&P etc. all complete as per the direction of the Engineer-in-charge.
4.6
-
285.6
Supplying all materials, labour, T&P and providing RR stone masonry in CM(1:6) in foundation & plinth including cost, carriage and royalty of all the materials etc all complete.
30.6
-
3187.4
Providing CB brick masonry in c.m. (1:6) for use in superstructure using. bricks of 230mm size including splays cutting, circular moulding, champering, corbelling, curing with all cost, conveyance, royalty of materials, labour, T&P etc. complete.
21.81
-
4037.9
Supplying all materials, labour, T&P and providing Cement concrete (1:2:4) with 12 mm size CBHG chips for RCC work including hoisting lowering & laying, cost, carriage, royalty and taxes of all materials etc all complete as per direction of EIC.
4.47
-
5619.4
Supplying, straightening, cutting, bending, binding, bent up coiled Tor steel and binding wires, binding, tying the grills, hoisting, lowering and placing in position including all cost, carriage, taxes, all labour, T&P etc. complete
3.58
-
8018.9
Providing CB brick masonry in c.m. (1:6) for use in superstructure using. bricks of 230mm size including splays cutting, circular moulding, champering, corbelling, curing with all cost, conveyance, royalty of materials, labour, T&P etc. complete. (for gate pillar)
2.53
-
4037.9
16mm thick cement plaster (1:6) over brick / stone masonry work including cost carriage and royality of all materials
287.48
-
195.2
Supplying all materials labour T&P and providing cement washing one coat to new plastered surface including transportation charges taxes etc all complete.
287.48
-
21.8
Supplying all materials labour T&P and finishing wall with water proffing cement paint of approved shed on new work two coats to give an even shade including cost of paints, taxes etc all complete as per direction of EIC.
287.48
-
32.4
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 3.00 kg / sqft )
360
-
72
Painting two coats with approved paint on new wood / iron work including cost of paint
9
-
189.8
Earth filling with excavated materials including watering and ramming etc all complete
2.85
-
113.46
Supplying all materials, labour, T&P and providing 2.5 cm DPC with CC(1:2:4) using 12 mm size HG chips.including cost, carriage and royalty of all materials etc all complete. (Per 1 Sqm)
25.2
-
268.1
Construction of 70,000 LTR OHT WITH 15M STAGING
Supplying of all labour,T&P,material including taxes for soil testing ,supply of approved design, drawing , construction,errection,testing & commissioning etc. of RCC elevated storage reservoir of 70,000 ltrs capacity with necessary staging height of 15 mtr, consisting of minimum 6 nos RCC columns and cylindrical container with circular dome with raft foundation as applicable using CC M-25 with sand and pcc layer below foundation, as per approved drawing, excluding in-let,out-let,over flow & washing line of ESR,use of 32 mm Stainless steel pipe for Staircase hand Railing, Gallery and Stainless steel ladder inside and outside the ESR,CI puddle collar of suitable size,0.6 m dia CI manhole cover at dome , RCC vent with jally, lightening arrestor and water level indicator etc. and wall writing complete as per direction of the Engineer - in- Charge.
1
-
2234800
Comprehensive operation & maintenance for 05years
5
-
39847.21
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements