Rural Water Supply And Sanitation Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_RWSS_75080_4Bid Award Id
ViewTender No
SE RWSS(PLB)_26/2021-2022Tender Authority
Rural Water Supply And Sanitation Department ViewPurchaser Address
-Website
http://https://rayagada.nic.in/rural-water-supply-sanitation/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
4th depth of 1.5m
71.7
-
66588.8
5th depth of 1.5m
71.7
-
80356.58
6th depth of 1.5m
61.1
-
94124.36
Cutting disintigrated rock not requiring blasting to be removed by pick axes and crow and depositing materials within 50mtr initiallead and 1.5mtr initial lift including rough dressing as per specification & direction of the depertmrnt including stacking the usefull materials separately as ordered. (a) 7th depth of 1.5m
24.44
-
169270.91
Excavation of Hard rock (granite) removed by chiselling including dressing and levelling the bed at required depth and depositing the soil within all lead & lift and as per specification & approved by the departmrnt.
12.22
-
2493.79
Providing dry stone masonry or rough stone dry masonry in well staining below ground level beyond 4.5mtr depth to 7.5 mtr all labour, T & P, including cost, conveyance, royalities & taxes of all materials required for the work etc. complete as per direction of Engineer in charge.
46.55
-
1648.28
Labour charges for providing strong, rigid, levelled, and plumbed centering and shuttering to required shapre and size with all necessary bracing and ties and support with levelled centering including dismentalling the same after the required interval from the date of casting including cost of materials, labour, T & P required for the work etc complete as per direction of Engineer-in-charge. (a) 1st Bracing
7.42
-
1056.13
2nd Bracing
7.42
-
880.11
3rd Bracing
7.23
-
880.11
Top Bracing (Centering & Shuttering)
8.66
-
733.42
Supplying all materials, labour, T&P and providing RCC work of (1:1.5:3) grade with 20mm and Down grade crusher broken black hard granite chips including oisting and laying, cost, conveyance, royalities and taxes of all materias, labour, T&P required for the work etc. complete as per direction of the Engineer-in-charge. (a) 1st bracing (beyond 4.5 mtr)
6.68
-
7569.25
3rd bracing (beyond 1.5mtr)
2.71
-
7469.4
Top Bracing
2.76
-
7168.97
Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing & technical specification including cutting, bending, binding tying with cost & conveyance of MS rod & binding wire 10 to 20 gauge. (a) Beyond 4.5mtr
6
-
8450.76
Providing RRHG Stone Masonary in CM (1:6) upto Plinth level of layer not exceeding 30cm using HG stone of approved quality from approved quarry inclding mixing of mortar, breaking of stne as per required size, laying, watering and curing, including cost, conveyance, royalities & taxes of all materials, labour and T & P required for the work etc. complete as per direction of Engineer in charge. (a) Beyond 4.5 mtr
46.55
-
3946.93
Beyond 1.5m & upto 4.5mtr
37.77
-
3846.33
Witnin 1.5mtr
26.22
-
3544.51
Metal spall backing to the rear side of well steining using 5cm size HG metal including all cost of materials, labour, T & P etc complete.
9.24
-
1014.11
Filling with excavated materials including watering and ramming as directed by Engineer-in-charge
132.12
-
10488.35
Supplying all materials, labour, T&P and filling foundation and plinth with sand duly watered and rammed including cost, conveyance, royalities and taxes of all materias, labour, T&P required for the work etc. complete as per direction of the Engineer-in-charge.
3.44
-
382.56
Providing 20mm thick cement plaster (1:4) of the rough surface of masonry, racking out joints, including scrapping and cleaning the surface and finishing smooth to proper plumb and levels and providing grooves, all T & P etc including cost, conveyance, royalities and taxes of all materials required for the work complete.
30.05
-
228.31
Dewatering during excavetion and other constructional work
210
-
51.3
Supplying all labour, T&P for providing C.C (1:4:8) with 4cm H.G Metal platform arround well
2.46
-
4056.65
Supplying, Fixing And Fitting Of Cover Slab For 6.00 Mtr Outer Dia Stone Masonary Percolation Well - Supply all materials, labour, T&P, Welding rods, gas etc. for fabricating and welding of different sizes of MS angles, joist channel, MS/G.I pipe, flat and sheets of 4mm thick as per the required site condition for covering the 5mtr dia RCC/ Masonary well with MS/G.I ralling, necessary precaution to prevent entry of foreign materials like leaves, earth and dust into the well, filling cavities & gaps with CC(1:2:4), finished smooth including painting two coats with approved enamel paint over a coat of redoxide primer to sheet, channel and ralling complete including GST & cess , as per the direction of Engineer-in-charge. (a) MS Channel of size (100X 50 X 50 X 6 )mm
353.72
-
67
MS Anglel of size (60X 60 X 6 )mm
73.44
-
70
MS Anglel of size (50 X 50 X 6 )mm
59.5
-
70
Walk way
74.25
-
70
Foot stair
8.5
-
70
2.5mm thick ms plate covering
794.21
-
75
Providing and Laying fabricated G.I pipes and specials as dimentionaly mentioned in proper position / alignment as directed by the concern Engineer in charge including cost, conveyance, loading, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main/distrubution system, welding on automatic welding machine including cost of all materials, labour, T&P consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete..(a) 80mm dia G.I Pipe chain pully stand
11
-
1086.14
G.I pipe railing 40 mm dia
56.91
-
504.49
Painting two coats with any approved enamel paints over a coat of redoxide primer including cost of all materials and labour charges etc. complete.
34.19
-
193.01
Construction of boundary wall around pump House & Storage Reservoir - Earth work in hard soil and gravelley soil within 50m, initial lead and 1.5, initial lift including rough dressing and breaking clods to maximum 5 cm to7 cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge.
45
-
18879.02
Filling in plinth with selected sand in the areas within initial lead & lift, including cost of materials, labours, T&P etc. complete.
9
-
382.56
Providing & laying cement concrete of proportion ( 1:4:8 )of 40mm downgraded stone aggregate of specified thickness for foundations below walls, column footings at any depth below floors etc. including centering, shuttering if required laying spreading, ramming, and curing etc.complete including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer.
9
-
4056.65
Providing and constructing Random rubble H.G. stone masonry at foundation in cement mortar 1:6 including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer.
32.4
-
3472.09
2.5cm Dam proof course (DPC) with CC (1:2:4) using 12mm size HBHG chips including cost, conveyance, royality, of all materials etc. complete as per direction of Engineer-in-charge.
36
-
297.57
Providing and constructing Brick masonry at all floors and locations using best approved quality fly ash bricks 25cmX12cmX8cm size having crushing strength not less than 75Kg/Sqm with dimentional tolerance +/- 8% in cement mortar (1:6)
27.05
-
4330.31
Providing and applying cement plaster 16mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P Taxes, curing etc. complete as direction of engineer.
134.38
-
205.52
Providing and applying cement plaster 12mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P Taxes, curing etc. complete as direction of engineer.
134.38
-
145.11
Finishing wall with water proofing cement paint two coats of approved shade on new plastered surface to give an even shade including cost, conveyance, royalities and taxes of materials, labour, T&P, required for the work etc. all complete
268.76
-
136.65
Filling in foundation & plinth with excavated materials including watering and ramming as directed by the engineer-in-charge.
5.4
-
113.45
providing and fixing ms fabricated gate to the boundery
45
-
70
Painting two coats with enamel paint over one coat of primer
0.9
-
193.01
Construction Pump Chamber of size 3mtr X 3mtr inside dimension - Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
12.42
-
204.22
Sand filling in foundation and plinth well watered and rammed including cost carriage and royalty(Head works site filling 120cum+ Pump House foundation 5.35 cum)
5.35
-
382.56
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
2.6
-
4056.65
Random rubble HG stone maonry in cement mortar (1:6) in foundation and plinth
7.9
-
3472.09
a.Fly Ash Brick masonry in CM (1:6) in foundation plinth including cost carriage royalty of all materials
0.82
-
4330.31
b. Fly Ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials
8.46
-
4363.64
Earth filling with excavated materials including watering and ramming etc all complete
3.36
-
113.45
Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete. a)R.C.C. Foundation, Plinth Bend
3.9
-
101.71
b) RCC Lintel
2.43
-
264.1
c)RCC Roof and chajja
15.77
-
429.25
RCC M20 with 12 mm size HG chips including hoisting lowering and laying the concrete including cost carriage royalty of all materials
2.61
-
5368.24
2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials
14.44
-
308.7
Supplying, fitting and placing uncoated HYSD bar reinforcement ( TATA/SAIL/VIZAG Made ) complete as per drawing & technical specification including cutting, bending, binding tying with cost & conveyance of MS rod & binding wire 10 to 20 gauge.
2.35
-
8450.76
12mm thick cement plaster (1:4) over brick masonry work including cement punning and bituminus painting over top of wall including cost carriage and royality of all materials
3.25
-
207.5
12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials
93.18
-
145.11
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete.
11.95
-
300.21
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips including cost carriage royalty of all materials etc all complete
4.05
-
318.9
Supplying all materials labour T&P and providing Weather coat to new plastered surface including transportation charges taxes etc all complete
93.18
-
136.65
Supplying all materials labour T&P and finishing walls with Plastic emulsion paint of approved shade with two coats to give an even shade including cost of paint and carriage charges etc all complete.
93.18
-
88.17
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )
90
-
75
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 4.50 kg / sqft )
73.5
-
70
Supplying all materials labour T&P and providing 5 cm thick RCC Shelf in cc(1:2:4) with CB HG Chips 12 mm size fitted and fixed in position finished smooth complete with all materials etc all complete
73.5
-
75
Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete
9.68
-
137.93
Fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials.
11.95
-
965.1
Fixing tiles in dados, skirting and risers of steps on 12mm cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.
5.5
-
1069.46
Providing & Fixing CHEQURED TILES in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.
15.21
-
499.59
Internal Electrification - Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge.
10
-
170
Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge.
2
-
165
Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required
7
-
32
Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. 32 Amp D.P.main switch with porcelain base
1
-
951
Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.63 Amp TPN Main switch
1
-
3506
Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
1555
Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
85
Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required.(a) 250mmx200mmx75mm
1
-
160
(b) 180mmx100mmx60mm
1
-
84
Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required a. 4x10 sqmm + 2x6 sqmm
5
-
460
b.3x10 sqmm + 1x6 sqmm
5
-
335
c.2x4 sqmm + 1x2.5 sqmm
2
-
125
d.2x2.5 sqmm + 1x1.5 sqmm
5
-
95
e.3x1.5 sqmm + 1x1.5 sqmm
2.5
-
90
Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction of the Engineer in charge. (a)Short point
2
-
330
b.Medium point
1
-
430
c.Long point
1
-
550
Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge.
2
-
435
Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. A.5 / 6 Amp one way switch (Piano type)
5
-
21
B.3 Pin 5/6 socket outlet (piano tytpe)
1
-
34
Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required.
15
-
58
Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required
0.3
-
530
Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc with charcoal and salt as required.
1
-
1875
PROCURMENT OF SUBMERSIBLE PUMP MOTOR AND ITS ACCESSORIES INCLUDING COST OF LOWERING ( The materials including with all taxes) - Supplying of Vertical / Open well submersible pump set in multistage construction with radial or mixed flow impellers coupeled with totaly enclosed water filled squirrel cage induction motor to operate at 2850rpm rated voltage 380-415 volt 50 Hz AC SINGLE /3phase power supply capable of discharging as noted below of any reputed make like KSB/CROMPTON/CRI/Kirloskar confirming to relevant IS specification IS 14220 for installing in RCC intake well /Percolation well. (a) 5.00 HP Pump Motor (head range - 90.00 mtr to 120.00 mtr and as per suitable to site condition )
2
-
28891.5
Supplying of 3 phase star delta controll pannel suitable for above submersible pump fitted with voltameter ,Ampermeter, selector, switch, main switch, fuse indicator ,connector,on/of switch with strater component with over load protection and single phasepreventor enclosed in a sheet steel encloser of any reputed make ( like BCH /switch and gear /L&T /Havells)
2
-
4000
ii) Procurement of submersible 4 sqmm flat cable of reputed make.
100
-
95.52
iii) Procurement of GI/GI column pipe of required dia (3mtr length) including fitting and fixture. a.40 mm dia
8
-
504.49
b. 40mm dia flanges
8
-
207.14
c. 40mm flange joint
4
-
136.26
d. 4 mm² PVC insulated wire rope with clamp
80
-
35
Installation of pumping set into Open well including fitting fixing of electrical accessories such as main switch, control pannel unit including jointing, lowering of column pipe & cable and incluiding bore clamp, bore cap etc as required complete.
2
-
4443
Rising main and Distribution system - Providing and laying fabricated G.I pipes of TATA/Jindal make and specials as dimentionally mentioned in proper position / alignment as directed by the concern Engineer in charge including conveyance from stores to site of work, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main / distribution system, welding on automatic welding machine including cost of all materials, labour, T&P , consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. (a) 80 mm dia G.I. Pipe (Medium class)
1405
-
1086.14
Providing and laying fabricated G.I specials as dimentionally mentioned made out of 8mm thick G.I plate, gas cutting to required size, rolling, tack welding, assembling to required size, welding on automatic welding machine including cost of materials as required including hire and depriciation charges of machinaries & T&P materials such as generators, welding machine etc. all complete with provision of anticorrosive paint as directed by the concerned Engineer in-charge including conveyance of the same to the work site, unloading and stacking in proper position. (a) 80mm dia x 8mm thick GI flange
4
-
450
80mm dia 0.30 long 90⁰/45⁰ plain bend
2
-
1590.95
Cutting
6
-
438.74
Welding
6
-
366.16
Laying in trenches HDPE pipes conforming to IS 4984-1995 & specials of following outside diameter & class 4 to class 5 & jointig by fusion welding Method including testig as per specification complete. (a) 90 mm Dia HDPE pipes PN-6
3925
-
333.42
Earth workwithin 50m, initial lead and 1.5, initial lift including rough dressing and breaking clods to maximum 5 cm to7 cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge.for laying pipe line incluiding refilling with excavated earth. (a) ALL KIND OF SOIL
1530.75
-
204.22
Refilling the pipe line trenches with the excavated earth including watering and raming as directed by the Engineer -in -charge.
1505.77
-
113.46
Supply and fixing switch check type cast iron Non-Return Valves with double flanged ends for water works purposed for the following rating and nominal dia meter including cost of Non-Return Valves, bolts, Nuts and rubber insertion as required as per specification complete. (a) 80mm Dia 16MPA CI NRV confirmingto IS 5312 (Part-I) 1984
2
-
4408.96
Supply and fixing of cast iron Sluice Valve with double flanged ends for water works purposes for the rollowing rating and nominal diameters including the cost of cast iron sluice valves, bolts, nuts and rubber insertion as per spefication complete. (a) 80mm Dia CI Sluice Valve with rating PN 1 confiming to IS:780-1984
6
-
4928.15
Supply and fixing of single Air Valve for water works purposes for the following diameter, including drilling the water main including cost of air valves, metal straps as per specification complete. (a) Single Air Valve (15mm to 25mm Dia meter)
3
-
1892.85
Supplying all materials labour T&P for construction of sluice valve chamber of size 0.90mx0.90mx1.05mtr (inside size) for SLUIE VALVE CHAMBER / NON RETURN VALVES with 10.00cm per cast cement concrete cover slab with CC (1:2:4) , earth work in hard soil for excavetion of foundation ,0.10mtr thich metal concrete (1:4:8) with 40mm size HBHG meteal , 0.25 mtr thick brick work woth CB brick of size 25cmx12cmx8cm having cruseing strenght not less then 75Kg/cm² in cement motar of propotion (1:6) in the wall of the chambers and inside plastering with 12cnm thick CP ( 1:4) finishing smooth with floating coat of net cement punning including curing as per approved drawing and specification including cost, conveyance, royality and taxes of all materials labour T&P as required for the work complete as per the direction of the concern Engineer-in- charge. ( On GI Pipe)
8
-
13239
Supplying all material, labour T&P for constructing chambers of size 0.75mX0.75mX0.15m (in side) for AIR VALVES with 10cm thick precast cement concrete cover slab with CC (1:2:4) mix. Earthwork in hard soils for excavation of foundation 0.10mtr thick, foundation concrete (1:4:8) with 40mm size HBHG metal, 250 mm thick brick work with CB bricks of size 25cmX12cmX8cm having crushing strength not less than 75kg/cm2 in cement mortar of proportion(1:6) in the wall of the chamber and in side plastering with 16mm thick C.M (1:6) finished smooth with coat of neat cement punning including curing as per approved drawing and specification as enclosed including cost, conveyance, royalities and taxes of all materials, labour, T&P as required for the work complete as per direction of the concerned Engineer-in-charge.
3
-
10637
INDIVIDUAL HOUSE HOLD WATER SUPPLY CONNECTION BY TAP Supplying all materials labour T&P for fitting and fixing of metal or PVC febricated shadle with suitable o ring, nuts and bolts etc with 1/8'' inch dia GM ferrule cock ,required 15mm to 20mm dia GI fittings,20mm dia GI pipe of 1.00 mtr length , making concrete block with 110mm OD PVC pipe of required length for stand point ,cutting hole through brick/ stone masonary wall with necessary earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
123
-
1892
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages (For FHTC)
123
-
92
Supplying all materials labour T&P for laying of 20mm dia HDPE pipe (PE-80,PN -10) incluiding earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
615
-
71.4
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages
45
-
649.33
Cutting Metal road for taking pipe line and making good to the damages
20
-
311.94
Storage Reservoir - Designing, Testing and commissioning of R.C.C ESR of 30,000 ltr of 10mtr staging with suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc. including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the ESR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
1319681
SUPPLYING, FITTING & FIXING OF 20M3/HR CAPACITY PRESSURE FILTER AS PER APPROVED DESIGN AND SPECIFICATION - Construction of M.S Filter Tank of size 1500mm dia x 2300mm ht with Dish end with man hold & hand hole cover. Plate thickness of body 8mm , Dish end 10 mm and bed plate 12mm , Bed plate supported with M.S Joist and Angles and leg fitted with Joist with hydraulic and fabrication charges and other @ materials, 50mm dia M.S face pipe line for filter including inlet and outlet, backwash drain line, ridgeline as per approved design including fabrication charges, G.I. Nut bolt and Packing, installation of Airline 20mm size with bulb valve, Electronic chlorine dozer, Air Compressor (1/2H.P) 3 Phase with DOL starter, laying of Catalytic Filter Media, P.V.C Strainer with fixing of 80mm C.I. Butterfly Valve, Erection, Testing and Commissioning with civil foundation charges, Painting Charges both inside and outside including all transportaion charges.
1
-
400000
B. Construction of 50,000 Ltr Capacity OGR - Designing, Testing and commissioning of R.C.C 50KL UGR with suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc., construction of RCC drain including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the UGR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
621685.6
C. LAYING OF GI PIPE LINE - Providing and laying fabricated GI specials as dimentionally mentioned made out of 12mm thick M.S plate, gas cutting to required size, rolling, tack welding, assembling to required size,welding on automatic welding machine including cost of materials T&P, consumables, & jointing materials as required, including hire and depriciation charges of machinaries & T&P meterials such as generators, welding machine etc. all complete, with provision of anticorrosive paint as directed by the concern Engineer in-charge including conveyance of the same to the work site, unloading and stacking in proper (a) Laying of 80 mm Dia GI Pipe on prepared surface.
40
-
1086.14
Providing and laying fabricated G.I specials as dimentionally mentioned made out of 8mm thick G.I plate, gas cutting to required size, rolling, tack welding, assembling to required size, welding on automatic welding machine including cost of materials as required including hire and depriciation charges of machinaries & T&P materials such as generators, welding machine etc. all complete with provision of anticorrosive paint as directed by the concern Engineer in-charge including conveyance of the same to the work site, unloading and stacking in proper position. (a) 80mm dia, 0.30mtr long 45°/ 90° plain Bend
1
-
1558.53
80mm x 80mm x 80 mm dia GI T
1
-
3054.3
Supply and fixing switch check type cast iron Non-Return Valves with double flanged ends for water works purposed for the following rating and nominal dia meter including cost of Non-Return Valves, bolts, Nuts and rubber insertion as required as per specification complete (a) 80mm Dia 16MPA CI NRV confirmingto IS 5312 (Part-I) 1984
1
-
4407.59
Supply and fixing of single Air Valve for water works purposes for the following diameter, including drilling the water main including cost of air valves, metal straps as per specification complete. (a) Single Air Valve (15mm to 25mm Dia meter)
1
-
1886.05
Supplying all materials, labour, T & P for constructing masonry chambers to accommodate non-return valves and sluice valves as per PH specification complete. (a) Sluice Valve & Non Return valve
1
-
8294
Display Board - Supplying all materials labour T&P for Construction of Display Board (1.5M. X 1.5M.)
1
-
4549
Operation & maintainance cost 5% for 5 years @ 1% per year
5
-
81250
PWS to village Bedaguba - Construction of 5.00m Inside Dia Stone Masonry Percolation Well - Earthwork in openwell excavation in hard soil or gravelly soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking colds to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer in charge. (a) 1st depth of 1.5m
83.16
-
18879.02
2nd depth of 1.5m
83.16
-
25848.89
Earthwork in openwell ecavation in stoney earth and gravels mixed with stone boulders not exceeding 0.14 cum in volumn within 50m initial lead including rough dress and breaking colds to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per specification. (a) 3rd depth of 1.5m
83.16
-
52821.01
4th depth of 1.5m
71.7
-
66588.8
5th depth of 1.5m
71.7
-
80356.58
6th depth of 1.5m
61.1
-
94124.36
Cutting disintigrated rock not requiring blasting to be removed by pick axes and crow and depositing materials within 50mtr initiallead and 1.5mtr initial lift including rough dressing as per specification & direction of the depertmrnt including stacking the usefull materials separately as ordered. (a) 7th depth of 1.5m
24.44
-
169270.91
Excavation of Hard rock (granite) removed by chiselling including dressing and levelling the bed at required depth and depositing the soil within all lead & lift and as per specification & approved by the departmrnt.
12.22
-
2493.79
Providing dry stone masonry or rough stone dry masonry in well staining below ground level beyond 4.5mtr depth to 7.5 mtr all labour, T & P, including cost, conveyance, royalities & taxes of all materials required for the work etc. complete as per direction of Engineer in charge.
46.55
-
1648.28
Labour charges for providing strong, rigid, levelled, and plumbed centering and shuttering to required shapre and size with all necessary bracing and ties and support with levelled centering including dismentalling the same after the required interval from the date of casting including cost of materials, labour, T & P required for the work etc complete as per direction of Engineer-in-charge. (a) 1st Bracing
7.42
-
1056.13
2nd Bracing
7.42
-
880.11
3rd Bracing
7.23
-
880.11
Top Bracing (Centering & Shuttering)
8.66
-
733.42
Supplying all materials, labour, T&P and providing RCC work of (1:1.5:3) grade with 20mm and Down grade crusher broken black hard granite chips including oisting and laying, cost, conveyance, royalities and taxes of all materias, labour, T&P required for the work etc. complete as per direction of the Engineer-in-charge. (a) 1st bracing (beyond 4.5 mtr)
6.68
-
7569.25
3rd bracing (beyond 1.5mtr)
2.71
-
7469.4
Top Bracing
2.76
-
7168.97
Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing & technical specification including cutting, bending, binding tying with cost & conveyance of MS rod & binding wire 10 to 20 gauge. (a) Beyond 4.5mtr
6
-
8450.76
Providing RRHG Stone Masonary in CM (1:6) upto Plinth level of layer not exceeding 30cm using HG stone of approved quality from approved quarry inclding mixing of mortar, breaking of stne as per required size, laying, watering and curing, including cost, conveyance, royalities & taxes of all materials, labour and T & P required for the work etc. complete as per direction of Engineer in charge. (a) Beyond 4.5 mtr
46.55
-
3946.93
Beyond 1.5m & upto 4.5mtr
37.77
-
3846.33
Witnin 1.5mtr
26.22
-
3544.51
Metal spall backing to the rear side of well steining using 5cm size HG metal including all cost of materials, labour, T & P etc complete.
9.24
-
1014.11
Filling with excavated materials including watering and ramming as directed by Engineer-in-charge
132.12
-
10488.35
Supplying all materials, labour, T&P and filling foundation and plinth with sand duly watered and rammed including cost, conveyance, royalities and taxes of all materias, labour, T&P required for the work etc. complete as per direction of the Engineer-in-charge.
3.44
-
382.56
Providing 20mm thick cement plaster (1:4) of the rough surface of masonry, racking out joints, including scrapping and cleaning the surface and finishing smooth to proper plumb and levels and providing grooves, all T & P etc including cost, conveyance, royalities and taxes of all materials required for the work complete.
30.05
-
228.31
Dewatering during excavetion and other constructional work
210
-
51.3
Supplying all labour, T&P for providing C.C (1:4:8) with 4cm H.G Metal platform arround well
2.46
-
4056.65
Supplying, Fixing And Fitting Of Cover Slab For 6.00 Mtr Outer Dia Stone Masonary Percolation Well - Supply all materials, labour, T&P, Welding rods, gas etc. for fabricating and welding of different sizes of MS angles, joist channel, MS/G.I pipe, flat and sheets of 4mm thick as per the required site condition for covering the 5mtr dia RCC/ Masonary well with MS/G.I ralling, necessary precaution to prevent entry of foreign materials like leaves, earth and dust into the well, filling cavities & gaps with CC(1:2:4), finished smooth including painting two coats with approved enamel paint over a coat of redoxide primer to sheet, channel and ralling complete including GST & cess , as per the direction of Engineer-in-charge. (a) MS Channel of size (100X 50 X 50 X 6 )mm
353.72
-
67
MS Anglel of size (60X 60 X 6 )mm
73.44
-
70
MS Anglel of size (50 X 50 X 6 )mm
59.5
-
70
Walk way
74.25
-
70
Foot stair
8.5
-
70
2.5mm thick ms plate covering
794.21
-
75
Providing and Laying fabricated G.I pipes and specials as dimentionaly mentioned in proper position / alignment as directed by the concern Engineer in charge including cost, conveyance, loading, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main/distrubution system, welding on automatic welding machine including cost of all materials, labour, T&P consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete..(a) 80mm dia G.I Pipe chain pully stand
11
-
1086.14
G.I pipe railing 40 mm dia
56.91
-
504.49
Painting two coats with any approved enamel paints over a coat of redoxide primer including cost of all materials and labour charges etc. complete.
34.19
-
193.01
Construction of boundary wall around pump House & Storage Reservoir - Earth work in hard soil and gravelley soil within 50m, initial lead and 1.5, initial lift including rough dressing and breaking clods to maximum 5 cm to7 cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge.
45
-
18879.02
Filling in plinth with selected sand in the areas within initial lead & lift, including cost of materials, labours, T&P etc. complete.
9
-
382.56
Providing & laying cement concrete of proportion ( 1:4:8 )of 40mm downgraded stone aggregate of specified thickness for foundations below walls, column footings at any depth below floors etc. including centering, shuttering if required laying spreading, ramming, and curing etc.complete including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer.
9
-
4056.65
Providing and constructing Random rubble H.G. stone masonry at foundation in cement mortar 1:6 including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer.
32.4
-
3472.09
2.5cm Dam proof course (DPC) with CC (1:2:4) using 12mm size HBHG chips including cost, conveyance, royality, of all materials etc. complete as per direction of Engineer-in-charge.
36
-
297.57
Providing and constructing Brick masonry at all floors and locations using best approved quality fly ash bricks 25cmX12cmX8cm size having crushing strength not less than 75Kg/Sqm with dimentional tolerance +/- 8% in cement mortar (1:6)
27.05
-
4330.31
Providing and applying cement plaster 16mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P Taxes, curing etc. complete as direction of engineer.
134.38
-
205.52
Providing and applying cement plaster 12mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P Taxes, curing etc. complete as direction of engineer.
134.38
-
145.11
Finishing wall with water proofing cement paint two coats of approved shade on new plastered surface to give an even shade including cost, conveyance, royalities and taxes of materials, labour, T&P, required for the work etc. all complete
268.76
-
136.65
Filling in foundation & plinth with excavated materials including watering and ramming as directed by the engineer-in-charge.
5.4
-
113.45
providing and fixing ms fabricated gate to the boundery
45
-
70
Painting two coats with enamel paint over one coat of primer
0.9
-
193.01
Construction Pump Chamber of size 3mtr X 3mtr inside dimension - Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
12.42
-
204.22
Sand filling in foundation and plinth well watered and rammed including cost carriage and royalty(Head works site filling 120cum+ Pump House foundation 5.35 cum)
5.35
-
382.56
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
2.6
-
4056.65
Random rubble HG stone maonry in cement mortar (1:6) in foundation and plinth
7.9
-
3472.09
a.Fly Ash Brick masonry in CM (1:6) in foundation plinth including cost carriage royalty of all materials
0.82
-
4330.31
b. Fly Ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials
8.46
-
4363.64
Earth filling with excavated materials including watering and ramming etc all complete
3.36
-
113.45
Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete. a)R.C.C. Foundation, Plinth Bend
3.9
-
101.71
b) RCC Lintel
2.43
-
264.1
c)RCC Roof and chajja
15.77
-
429.25
RCC M20 with 12 mm size HG chips including hoisting lowering and laying the concrete including cost carriage royalty of all materials
2.61
-
5368.24
2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials
14.44
-
308.7
Supplying, fitting and placing uncoated HYSD bar reinforcement ( TATA/SAIL/VIZAG Made ) complete as per drawing & technical specification including cutting, bending, binding tying with cost & conveyance of MS rod & binding wire 10 to 20 gauge.
2.35
-
8450.76
12mm thick cement plaster (1:4) over brick masonry work including cement punning and bituminus painting over top of wall including cost carriage and royality of all materials
3.25
-
207.5
12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials
93.18
-
145.11
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete.
11.95
-
300.21
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips including cost carriage royalty of all materials etc all complete
4.05
-
318.9
Supplying all materials labour T&P and providing Weather coat to new plastered surface including transportation charges taxes etc all complete
93.18
-
136.65
Supplying all materials labour T&P and finishing walls with Plastic emulsion paint of approved shade with two coats to give an even shade including cost of paint and carriage charges etc all complete.
93.18
-
88.17
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )
90
-
75
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 4.50 kg / sqft )
73.5
-
70
Supplying all materials labour T&P and providing 5 cm thick RCC Shelf in cc(1:2:4) with CB HG Chips 12 mm size fitted and fixed in position finished smooth complete with all materials etc all complete
73.5
-
75
Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete
9.68
-
137.93
Fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials.
11.95
-
965.1
Fixing tiles in dados, skirting and risers of steps on 12mm cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.
5.5
-
1069.46
Providing & Fixing CHEQURED TILES in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.
15.21
-
499.59
Internal Electrification - Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge.
10
-
170
Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge.
2
-
165
Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required
7
-
32
Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. 32 Amp D.P.main switch with porcelain base
1
-
951
Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.63 Amp TPN Main switch
1
-
3506
Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
1555
Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
85
Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required.(a) 250mmx200mmx75mm
1
-
160
(b) 180mmx100mmx60mm
1
-
84
Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required a. 4x10 sqmm + 2x6 sqmm
5
-
460
b.3x10 sqmm + 1x6 sqmm
5
-
335
c.2x4 sqmm + 1x2.5 sqmm
2
-
125
d.2x2.5 sqmm + 1x1.5 sqmm
5
-
95
e.3x1.5 sqmm + 1x1.5 sqmm
2.5
-
90
Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction of the Engineer in charge. (a)Short point
2
-
330
b.Medium point
1
-
430
c.Long point
1
-
550
Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge.
2
-
435
Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. A.5 / 6 Amp one way switch (Piano type)
5
-
21
B.3 Pin 5/6 socket outlet (piano tytpe)
1
-
34
Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required.
15
-
58
Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required
0.3
-
530
Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc with charcoal and salt as required.
1
-
1875
PROCURMENT OF SUBMERSIBLE PUMP MOTOR AND ITS ACCESSORIES INCLUDING COST OF LOWERING ( The materials including with all taxes) - Supplying of Vertical / Open well submersible pump set in multistage construction with radial or mixed flow impellers coupeled with totaly enclosed water filled squirrel cage induction motor to operate at 2850rpm rated voltage 380-415 volt 50 Hz AC SINGLE /3phase power supply capable of discharging as noted below of any reputed make like KSB/CROMPTON/CRI/Kirloskar confirming to relevant IS specification IS 14220 for installing in RCC intake well /Percolation well. (a) 3.00 HP Pump Motor (head range - 90.00 mtr to 120.00 mtr and as per suitable to site condition )
2
-
16551
Supplying of 3 phase star delta controll pannel suitable for above submersible pump fitted with voltameter ,Ampermeter, selector, switch, main switch, fuse indicator ,connector,on/of switch with strater component with over load protection and single phasepreventor enclosed in a sheet steel encloser of any reputed make ( like BCH /switch and gear /L&T /Havells)
2
-
4000
ii) Procurement of submersible 4 sqmm flat cable of reputed make.
100
-
95.52
iii) Procurement of GI/GI column pipe of required dia (3mtr length) including fitting and fixture. a.40 mm dia
8
-
504.49
b. 40mm dia flanges
8
-
207.14
c. 40mm flange joint
4
-
136.26
d. 4 mm² PVC insulated wire rope with clamp
80
-
35
Installation of pumping set into Open well including fitting fixing of electrical accessories such as main switch, control pannel unit including jointing, lowering of column pipe & cable and incluiding bore clamp, bore cap etc as required complete.
2
-
4443
Rising main and Distribution system - Providing and laying fabricated G.I pipes of TATA/Jindal make and specials as dimentionally mentioned in proper position / alignment as directed by the concern Engineer in charge including conveyance from stores to site of work, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main / distribution system, welding on automatic welding machine including cost of all materials, labour, T&P , consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. (a) 80 mm dia G.I. Pipe (Medium class)
1305
-
1086.14
Providing and laying fabricated G.I specials as dimentionally mentioned made out of 8mm thick G.I plate, gas cutting to required size, rolling, tack welding, assembling to required size, welding on automatic welding machine including cost of materials as required including hire and depriciation charges of machinaries & T&P materials such as generators, welding machine etc. all complete with provision of anticorrosive paint as directed by the concerned Engineer in-charge including conveyance of the same to the work site, unloading and stacking in proper position. (a) 80mm dia x 8mm thick GI flange
4
-
450
80mm dia 0.30 long 90⁰/45⁰ plain bend
2
-
1590.95
Cutting
6
-
438.74
Welding
6
-
366.16
Laying in trenches HDPE pipes conforming to IS 4984-1995 & specials of following outside diameter & class 4 to class 5 & jointig by fusion welding Method including testig as per specification complete. (a) 90 mm Dia HDPE pipes PN-6
3665
-
333.42
Earth workwithin 50m, initial lead and 1.5, initial lift including rough dressing and breaking clods to maximum 5 cm to7 cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge.for laying pipe line incluiding refilling with excavated earth. (a) ALL KIND OF SOIL
1429.35
-
204.22
Refilling the pipe line trenches with the excavated earth including watering and raming as directed by the Engineer -in -charge.
1406.02
-
113.46
Supply and fixing switch check type cast iron Non-Return Valves with double flanged ends for water works purposed for the following rating and nominal dia meter including cost of Non-Return Valves, bolts, Nuts and rubber insertion as required as per specification complete. (a) 80mm Dia 16MPA CI NRV confirmingto IS 5312 (Part-I) 1984
2
-
4408.96
Supply and fixing of cast iron Sluice Valve with double flanged ends for water works purposes for the rollowing rating and nominal diameters including the cost of cast iron sluice valves, bolts, nuts and rubber insertion as per spefication complete. (a) 80mm Dia CI Sluice Valve with rating PN 1 confiming to IS:780-1984
7
-
4928.15
Supply and fixing of single Air Valve for water works purposes for the following diameter, including drilling the water main including cost of air valves, metal straps as per specification complete. (a) Single Air Valve (15mm to 25mm Dia meter)
4
-
1892.85
Supplying all materials labour T&P for construction of sluice valve chamber of size 0.90mx0.90mx1.05mtr (inside size) for SLUIE VALVE CHAMBER / NON RETURN VALVES with 10.00cm per cast cement concrete cover slab with CC (1:2:4) , earth work in hard soil for excavetion of foundation ,0.10mtr thich metal concrete (1:4:8) with 40mm size HBHG meteal , 0.25 mtr thick brick work woth CB brick of size 25cmx12cmx8cm having cruseing strenght not less then 75Kg/cm² in cement motar of propotion (1:6) in the wall of the chambers and inside plastering with 12cnm thick CP ( 1:4) finishing smooth with floating coat of net cement punning including curing as per approved drawing and specification including cost, conveyance, royality and taxes of all materials labour T&P as required for the work complete as per the direction of the concern Engineer-in- charge. ( On GI Pipe)
9
-
13239
Supplying all material, labour T&P for constructing chambers of size 0.75mX0.75mX0.15m (in side) for AIR VALVES with 10cm thick precast cement concrete cover slab with CC (1:2:4) mix. Earthwork in hard soils for excavation of foundation 0.10mtr thick, foundation concrete (1:4:8) with 40mm size HBHG metal, 250 mm thick brick work with CB bricks of size 25cmX12cmX8cm having crushing strength not less than 75kg/cm2 in cement mortar of proportion(1:6) in the wall of the chamber and in side plastering with 16mm thick C.M (1:6) finished smooth with coat of neat cement punning including curing as per approved drawing and specification as enclosed including cost, conveyance, royalities and taxes of all materials, labour, T&P as required for the work complete as per direction of the concerned Engineer-in-charge.
4
-
10637
INDIVIDUAL HOUSE HOLD WATER SUPPLY CONNECTION BY TAP Supplying all materials labour T&P for fitting and fixing of metal or PVC febricated shadle with suitable o ring, nuts and bolts etc with 1/8'' inch dia GM ferrule cock ,required 15mm to 20mm dia GI fittings,20mm dia GI pipe of 1.00 mtr length , making concrete block with 110mm OD PVC pipe of required length for stand point ,cutting hole through brick/ stone masonary wall with necessary earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
101
-
1892
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages (For FHTC)
101
-
92
Supplying all materials labour T&P for laying of 20mm dia HDPE pipe (PE-80,PN -10) incluiding earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
505
-
71.4
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages
45
-
649.33
Cutting Metal road for taking pipe line and making good to the damages
20
-
311.94
Storage Reservoir - Designing, Testing and commissioning of R.C.C ESR of 30,000 ltr of 10mtr staging with suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc. including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the ESR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
1319681
SUPPLYING, FITTING & FIXING OF 20M3/HR CAPACITY PRESSURE FILTER AS PER APPROVED DESIGN AND SPECIFICATION - Construction of M.S Filter Tank of size 1500mm dia x 2300mm ht with Dish end with man hold & hand hole cover. Plate thickness of body 8mm , Dish end 10 mm and bed plate 12mm , Bed plate supported with M.S Joist and Angles and leg fitted with Joist with hydraulic and fabrication charges and other @ materials, 50mm dia M.S face pipe line for filter including inlet and outlet, backwash drain line, ridgeline as per approved design including fabrication charges, G.I. Nut bolt and Packing, installation of Airline 20mm size with bulb valve, Electronic chlorine dozer, Air Compressor (1/2H.P) 3 Phase with DOL starter, laying of Catalytic Filter Media, P.V.C Strainer with fixing of 80mm C.I. Butterfly Valve, Erection, Testing and Commissioning with civil foundation charges, Painting Charges both inside and outside including all transportaion charges.
1
-
400000
B. Construction of 50,000 Ltr Capacity OGR - Designing, Testing and commissioning of R.C.C 50KL UGR with suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc., construction of RCC drain including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the UGR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
621685.6
C. LAYING OF GI PIPE LINE - Providing and laying fabricated GI specials as dimentionally mentioned made out of 12mm thick M.S plate, gas cutting to required size, rolling, tack welding, assembling to required size,welding on automatic welding machine including cost of materials T&P, consumables, & jointing materials as required, including hire and depriciation charges of machinaries & T&P meterials such as generators, welding machine etc. all complete, with provision of anticorrosive paint as directed by the concern Engineer in-charge including conveyance of the same to the work site, unloading and stacking in proper (a) Laying of 80 mm Dia GI Pipe on prepared surface.
40
-
1086.14
Providing and laying fabricated G.I specials as dimentionally mentioned made out of 8mm thick G.I plate, gas cutting to required size, rolling, tack welding, assembling to required size, welding on automatic welding machine including cost of materials as required including hire and depriciation charges of machinaries & T&P materials such as generators, welding machine etc. all complete with provision of anticorrosive paint as directed by the concern Engineer in-charge including conveyance of the same to the work site, unloading and stacking in proper position. (a) 80mm dia, 0.30mtr long 45°/ 90° plain Bend
1
-
1558.53
80mm x 80mm x 80 mm dia GI T
1
-
3054.3
Supply and fixing switch check type cast iron Non-Return Valves with double flanged ends for water works purposed for the following rating and nominal dia meter including cost of Non-Return Valves, bolts, Nuts and rubber insertion as required as per specification complete (a) 80mm Dia 16MPA CI NRV confirmingto IS 5312 (Part-I) 1984
1
-
4407.59
Supply and fixing of single Air Valve for water works purposes for the following diameter, including drilling the water main including cost of air valves, metal straps as per specification complete. (a) Single Air Valve (15mm to 25mm Dia meter)
1
-
1886.05
Supplying all materials, labour, T & P for constructing masonry chambers to accommodate non-return valves and sluice valves as per PH specification complete. (a) Sluice Valve & Non Return valve
1
-
8294
Display Board - Supplying all materials labour T&P for Construction of Display Board (1.5M. X 1.5M.)
1
-
4549
Operation & maintainance cost 5% for 5 years @ 1% per year
5
-
78520
PWS to village Dibari - Construction of 5.00m Inside Dia Stone Masonry Percolation Well - Earthwork in openwell excavation in hard soil or gravelly soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking colds to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer in charge. (a) 1st depth of 1.5m
83.16
-
18879.02
2nd depth of 1.5m
83.16
-
25848.89
Earthwork in openwell ecavation in stoney earth and gravels mixed with stone boulders not exceeding 0.14 cum in volumn within 50m initial lead including rough dress and breaking colds to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per specification. (a) 3rd depth of 1.5m
83.16
-
52821.01
4th depth of 1.5m
71.7
-
66588.8
5th depth of 1.5m
71.7
-
80356.58
6th depth of 1.5m
61.1
-
94124.36
Cutting disintigrated rock not requiring blasting to be removed by pick axes and crow and depositing materials within 50mtr initiallead and 1.5mtr initial lift including rough dressing as per specification & direction of the depertmrnt including stacking the usefull materials separately as ordered. (a) 7th depth of 1.5m
24.44
-
169270.91
Excavation of Hard rock (granite) removed by chiselling including dressing and levelling the bed at required depth and depositing the soil within all lead & lift and as per specification & approved by the departmrnt.
12.22
-
2493.79
Providing dry stone masonry or rough stone dry masonry in well staining below ground level beyond 4.5mtr depth to 7.5 mtr all labour, T & P, including cost, conveyance, royalities & taxes of all materials required for the work etc. complete as per direction of Engineer in charge.
46.55
-
1648.28
Labour charges for providing strong, rigid, levelled, and plumbed centering and shuttering to required shapre and size with all necessary bracing and ties and support with levelled centering including dismentalling the same after the required interval from the date of casting including cost of materials, labour, T & P required for the work etc complete as per direction of Engineer-in-charge. (a) 1st Bracing
7.42
-
1056.13
2nd Bracing
7.42
-
880.11
3rd Bracing
7.23
-
880.11
Top Bracing (Centering & Shuttering)
8.66
-
733.42
Supplying all materials, labour, T&P and providing RCC work of (1:1.5:3) grade with 20mm and Down grade crusher broken black hard granite chips including oisting and laying, cost, conveyance, royalities and taxes of all materias, labour, T&P required for the work etc. complete as per direction of the Engineer-in-charge. (a) 1st bracing (beyond 4.5 mtr)
6.68
-
7569.25
3rd bracing (beyond 1.5mtr)
2.71
-
7469.4
Top Bracing
2.76
-
7168.97
Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing & technical specification including cutting, bending, binding tying with cost & conveyance of MS rod & binding wire 10 to 20 gauge. (a) Beyond 4.5mtr
6
-
8450.76
Providing RRHG Stone Masonary in CM (1:6) upto Plinth level of layer not exceeding 30cm using HG stone of approved quality from approved quarry inclding mixing of mortar, breaking of stne as per required size, laying, watering and curing, including cost, conveyance, royalities & taxes of all materials, labour and T & P required for the work etc. complete as per direction of Engineer in charge. (a) Beyond 4.5 mtr
46.55
-
3946.93
Beyond 1.5m & upto 4.5mtr
37.77
-
3846.33
Witnin 1.5mtr
26.22
-
3544.51
Metal spall backing to the rear side of well steining using 5cm size HG metal including all cost of materials, labour, T & P etc complete.
9.24
-
1014.11
Filling with excavated materials including watering and ramming as directed by Engineer-in-charge
132.12
-
10488.35
Supplying all materials, labour, T&P and filling foundation and plinth with sand duly watered and rammed including cost, conveyance, royalities and taxes of all materias, labour, T&P required for the work etc. complete as per direction of the Engineer-in-charge.
3.44
-
382.56
Providing 20mm thick cement plaster (1:4) of the rough surface of masonry, racking out joints, including scrapping and cleaning the surface and finishing smooth to proper plumb and levels and providing grooves, all T & P etc including cost, conveyance, royalities and taxes of all materials required for the work complete.
30.05
-
228.31
Dewatering during excavetion and other constructional work
210
-
51.3
Supplying all labour, T&P for providing C.C (1:4:8) with 4cm H.G Metal platform arround well
2.46
-
4056.65
Supplying, Fixing And Fitting Of Cover Slab For 6.00 Mtr Outer Dia Stone Masonary Percolation Well - Supply all materials, labour, T&P, Welding rods, gas etc. for fabricating and welding of different sizes of MS angles, joist channel, MS/G.I pipe, flat and sheets of 4mm thick as per the required site condition for covering the 5mtr dia RCC/ Masonary well with MS/G.I ralling, necessary precaution to prevent entry of foreign materials like leaves, earth and dust into the well, filling cavities & gaps with CC(1:2:4), finished smooth including painting two coats with approved enamel paint over a coat of redoxide primer to sheet, channel and ralling complete including GST & cess , as per the direction of Engineer-in-charge. (a) MS Channel of size (100X 50 X 50 X 6 )mm
353.72
-
67
MS Anglel of size (60X 60 X 6 )mm
73.44
-
70
MS Anglel of size (50 X 50 X 6 )mm
59.5
-
70
Walk way
74.25
-
70
Foot stair
8.5
-
70
2.5mm thick ms plate covering
794.21
-
75
Providing and Laying fabricated G.I pipes and specials as dimentionaly mentioned in proper position / alignment as directed by the concern Engineer in charge including cost, conveyance, loading, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main/distrubution system, welding on automatic welding machine including cost of all materials, labour, T&P consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete..(a) 80mm dia G.I Pipe chain pully stand
11
-
1086.14
G.I pipe railing 40 mm dia
56.91
-
504.49
Painting two coats with any approved enamel paints over a coat of redoxide primer including cost of all materials and labour charges etc. complete.
34.19
-
193.01
Construction of boundary wall around pump House & Storage Reservoir - Earth work in hard soil and gravelley soil within 50m, initial lead and 1.5, initial lift including rough dressing and breaking clods to maximum 5 cm to7 cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge.
45
-
18879.02
Filling in plinth with selected sand in the areas within initial lead & lift, including cost of materials, labours, T&P etc. complete.
9
-
382.56
Providing & laying cement concrete of proportion ( 1:4:8 )of 40mm downgraded stone aggregate of specified thickness for foundations below walls, column footings at any depth below floors etc. including centering, shuttering if required laying spreading, ramming, and curing etc.complete including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer.
9
-
4056.65
Providing and constructing Random rubble H.G. stone masonry at foundation in cement mortar 1:6 including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer.
32.4
-
3472.09
2.5cm Dam proof course (DPC) with CC (1:2:4) using 12mm size HBHG chips including cost, conveyance, royality, of all materials etc. complete as per direction of Engineer-in-charge.
36
-
297.57
Providing and constructing Brick masonry at all floors and locations using best approved quality fly ash bricks 25cmX12cmX8cm size having crushing strength not less than 75Kg/Sqm with dimentional tolerance +/- 8% in cement mortar (1:6)
27.05
-
4330.31
Providing and applying cement plaster 16mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P Taxes, curing etc. complete as direction of engineer.
134.38
-
205.52
Providing and applying cement plaster 12mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P Taxes, curing etc. complete as direction of engineer.
134.38
-
145.11
Finishing wall with water proofing cement paint two coats of approved shade on new plastered surface to give an even shade including cost, conveyance, royalities and taxes of materials, labour, T&P, required for the work etc. all complete
268.76
-
136.65
Filling in foundation & plinth with excavated materials including watering and ramming as directed by the engineer-in-charge.
5.4
-
113.45
providing and fixing ms fabricated gate to the boundery
45
-
70
Painting two coats with enamel paint over one coat of primer
0.9
-
193.01
Construction Pump Chamber of size 3mtr X 3mtr inside dimension - Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
12.42
-
204.22
Sand filling in foundation and plinth well watered and rammed including cost carriage and royalty(Head works site filling 120cum+ Pump House foundation 5.35 cum)
5.35
-
382.56
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
2.6
-
4056.65
Random rubble HG stone maonry in cement mortar (1:6) in foundation and plinth
7.9
-
3472.09
a.Fly Ash Brick masonry in CM (1:6) in foundation plinth including cost carriage royalty of all materials
0.82
-
4330.31
b. Fly Ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials
8.46
-
4363.64
Earth filling with excavated materials including watering and ramming etc all complete
3.36
-
113.45
Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete. a)R.C.C. Foundation, Plinth Bend
3.9
-
101.71
b) RCC Lintel
2.43
-
264.1
c)RCC Roof and chajja
15.77
-
429.25
RCC M20 with 12 mm size HG chips including hoisting lowering and laying the concrete including cost carriage royalty of all materials
2.61
-
5368.24
2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials
14.44
-
308.7
Supplying, fitting and placing uncoated HYSD bar reinforcement ( TATA/SAIL/VIZAG Made ) complete as per drawing & technical specification including cutting, bending, binding tying with cost & conveyance of MS rod & binding wire 10 to 20 gauge.
2.35
-
8450.76
12mm thick cement plaster (1:4) over brick masonry work including cement punning and bituminus painting over top of wall including cost carriage and royality of all materials
3.25
-
207.5
12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials
93.18
-
145.11
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete.
11.95
-
300.21
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips including cost carriage royalty of all materials etc all complete
4.05
-
318.9
Supplying all materials labour T&P and providing Weather coat to new plastered surface including transportation charges taxes etc all complete
93.18
-
136.65
Supplying all materials labour T&P and finishing walls with Plastic emulsion paint of approved shade with two coats to give an even shade including cost of paint and carriage charges etc all complete.
93.18
-
88.17
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )
90
-
75
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 4.50 kg / sqft )
73.5
-
70
Supplying all materials labour T&P and providing 5 cm thick RCC Shelf in cc(1:2:4) with CB HG Chips 12 mm size fitted and fixed in position finished smooth complete with all materials etc all complete
73.5
-
75
Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete
9.68
-
137.93
Fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials.
11.95
-
965.1
Fixing tiles in dados, skirting and risers of steps on 12mm cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.
5.5
-
1069.46
Providing & Fixing CHEQURED TILES in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.
15.21
-
499.59
Internal Electrification - Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge.
10
-
170
Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge.
2
-
165
Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required
7
-
32
Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. 32 Amp D.P.main switch with porcelain base
1
-
951
Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.63 Amp TPN Main switch
1
-
3506
Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
1555
Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
85
Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required.(a) 250mmx200mmx75mm
1
-
160
(b) 180mmx100mmx60mm
1
-
84
Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required a. 4x10 sqmm + 2x6 sqmm
5
-
460
b.3x10 sqmm + 1x6 sqmm
5
-
335
c.2x4 sqmm + 1x2.5 sqmm
2
-
125
d.2x2.5 sqmm + 1x1.5 sqmm
5
-
95
e.3x1.5 sqmm + 1x1.5 sqmm
2.5
-
90
Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction of the Engineer in charge. (a)Short point
2
-
330
b.Medium point
1
-
430
c.Long point
1
-
550
Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge.
2
-
435
Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. A.5 / 6 Amp one way switch (Piano type)
5
-
21
B.3 Pin 5/6 socket outlet (piano tytpe)
1
-
34
Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required.
15
-
58
Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required
0.3
-
530
Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc with charcoal and salt as required.
1
-
1875
PROCURMENT OF SUBMERSIBLE PUMP MOTOR AND ITS ACCESSORIES INCLUDING COST OF LOWERING ( The materials including with all taxes) - Supplying of Vertical / Open well submersible pump set in multistage construction with radial or mixed flow impellers coupeled with totaly enclosed water filled squirrel cage induction motor to operate at 2850rpm rated voltage 380-415 volt 50 Hz AC SINGLE /3phase power supply capable of discharging as noted below of any reputed make like KSB/CROMPTON/CRI/Kirloskar confirming to relevant IS specification IS 14220 for installing in RCC intake well /Percolation well. (a) 3.00 HP Pump Motor (head range - 90.00 mtr to 120.00 mtr and as per suitable to site condition )
2
-
16551
Supplying of 3 phase star delta controll pannel suitable for above submersible pump fitted with voltameter ,Ampermeter, selector, switch, main switch, fuse indicator ,connector,on/of switch with strater component with over load protection and single phasepreventor enclosed in a sheet steel encloser of any reputed make ( like BCH /switch and gear /L&T /Havells)
2
-
4000
ii) Procurement of submersible 4 sqmm flat cable of reputed make.
100
-
95.52
iii) Procurement of GI/GI column pipe of required dia (3mtr length) including fitting and fixture. a.40 mm dia
8
-
504.49
b. 40mm dia flanges
8
-
207.14
c. 40mm flange joint
4
-
136.26
d. 4 mm² PVC insulated wire rope with clamp
80
-
35
Installation of pumping set into Open well including fitting fixing of electrical accessories such as main switch, control pannel unit including jointing, lowering of column pipe & cable and incluiding bore clamp, bore cap etc as required complete.
2
-
4443
Rising main and Distribution system - Providing and laying fabricated G.I pipes of TATA/Jindal make and specials as dimentionally mentioned in proper position / alignment as directed by the concern Engineer in charge including conveyance from stores to site of work, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main / distribution system, welding on automatic welding machine including cost of all materials, labour, T&P , consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. (a) 80 mm dia G.I. Pipe (Medium class)
1090
-
1086.14
Providing and laying fabricated G.I specials as dimentionally mentioned made out of 8mm thick G.I plate, gas cutting to required size, rolling, tack welding, assembling to required size, welding on automatic welding machine including cost of materials as required including hire and depriciation charges of machinaries & T&P materials such as generators, welding machine etc. all complete with provision of anticorrosive paint as directed by the concerned Engineer in-charge including conveyance of the same to the work site, unloading and stacking in proper position. (a) 80mm dia x 8mm thick GI flange
4
-
450
80mm dia 0.30 long 90⁰/45⁰ plain bend
2
-
1590.95
Cutting
6
-
438.74
Welding
6
-
366.16
Laying in trenches HDPE pipes conforming to IS 4984-1995 & specials of following outside diameter & class 4 to class 5 & jointig by fusion welding Method including testig as per specification complete. (a) 90 mm Dia HDPE pipes PN-6
1845
-
333.42
Earth workwithin 50m, initial lead and 1.5, initial lift including rough dressing and breaking clods to maximum 5 cm to7 cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge.for laying pipe line incluiding refilling with excavated earth. (a) ALL KIND OF SOIL
719.55
-
204.22
Refilling the pipe line trenches with the excavated earth including watering and raming as directed by the Engineer -in -charge.
707.81
-
113.46
Supply and fixing switch check type cast iron Non-Return Valves with double flanged ends for water works purposed for the following rating and nominal dia meter including cost of Non-Return Valves, bolts, Nuts and rubber insertion as required as per specification complete. (a) 80mm Dia 16MPA CI NRV confirmingto IS 5312 (Part-I) 1984
2
-
4408.96
Supply and fixing of cast iron Sluice Valve with double flanged ends for water works purposes for the rollowing rating and nominal diameters including the cost of cast iron sluice valves, bolts, nuts and rubber insertion as per spefication complete. (a) 80mm Dia CI Sluice Valve with rating PN 1 confiming to IS:780-1984
4
-
4928.15
Supply and fixing of single Air Valve for water works purposes for the following diameter, including drilling the water main including cost of air valves, metal straps as per specification complete. (a) Single Air Valve (15mm to 25mm Dia meter)
4
-
1892.85
Supplying all materials labour T&P for construction of sluice valve chamber of size 0.90mx0.90mx1.05mtr (inside size) for SLUIE VALVE CHAMBER / NON RETURN VALVES with 10.00cm per cast cement concrete cover slab with CC (1:2:4) , earth work in hard soil for excavetion of foundation ,0.10mtr thich metal concrete (1:4:8) with 40mm size HBHG meteal , 0.25 mtr thick brick work woth CB brick of size 25cmx12cmx8cm having cruseing strenght not less then 75Kg/cm² in cement motar of propotion (1:6) in the wall of the chambers and inside plastering with 12cnm thick CP ( 1:4) finishing smooth with floating coat of net cement punning including curing as per approved drawing and specification including cost, conveyance, royality and taxes of all materials labour T&P as required for the work complete as per the direction of the concern Engineer-in- charge. ( On GI Pipe)
6
-
13239
Supplying all material, labour T&P for constructing chambers of size 0.75mX0.75mX0.15m (in side) for AIR VALVES with 10cm thick precast cement concrete cover slab with CC (1:2:4) mix. Earthwork in hard soils for excavation of foundation 0.10mtr thick, foundation concrete (1:4:8) with 40mm size HBHG metal, 250 mm thick brick work with CB bricks of size 25cmX12cmX8cm having crushing strength not less than 75kg/cm2 in cement mortar of proportion(1:6) in the wall of the chamber and in side plastering with 16mm thick C.M (1:6) finished smooth with coat of neat cement punning including curing as per approved drawing and specification as enclosed including cost, conveyance, royalities and taxes of all materials, labour, T&P as required for the work complete as per direction of the concerned Engineer-in-charge.
4
-
10637
INDIVIDUAL HOUSE HOLD WATER SUPPLY CONNECTION BY TAP Supplying all materials labour T&P for fitting and fixing of metal or PVC febricated shadle with suitable o ring, nuts and bolts etc with 1/8'' inch dia GM ferrule cock ,required 15mm to 20mm dia GI fittings,20mm dia GI pipe of 1.00 mtr length , making concrete block with 110mm OD PVC pipe of required length for stand point ,cutting hole through brick/ stone masonary wall with necessary earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
46
-
1892
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages (For FHTC)
46
-
92
Supplying all materials labour T&P for laying of 20mm dia HDPE pipe (PE-80,PN -10) incluiding earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
230
-
71.4
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages
30
-
649.33
Cutting Metal road for taking pipe line and making good to the damages
15
-
311.94
Storage Reservoir - Designing, Testing and commissioning of R.C.C ESR of 30,000 ltr of 10mtr staging with suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc. including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the ESR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
1319681
SUPPLYING, FITTING & FIXING OF 20M3/HR CAPACITY PRESSURE FILTER AS PER APPROVED DESIGN AND SPECIFICATION - Construction of M.S Filter Tank of size 1500mm dia x 2300mm ht with Dish end with man hold & hand hole cover. Plate thickness of body 8mm , Dish end 10 mm and bed plate 12mm , Bed plate supported with M.S Joist and Angles and leg fitted with Joist with hydraulic and fabrication charges and other @ materials, 50mm dia M.S face pipe line for filter including inlet and outlet, backwash drain line, ridgeline as per approved design including fabrication charges, G.I. Nut bolt and Packing, installation of Airline 20mm size with bulb valve, Electronic chlorine dozer, Air Compressor (1/2H.P) 3 Phase with DOL starter, laying of Catalytic Filter Media, P.V.C Strainer with fixing of 80mm C.I. Butterfly Valve, Erection, Testing and Commissioning with civil foundation charges, Painting Charges both inside and outside including all transportaion charges.
1
-
400000
B. Construction of 50,000 Ltr Capacity OGR - Designing, Testing and commissioning of R.C.C 50KL UGR with suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc., construction of RCC drain including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the UGR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
621685.6
C. LAYING OF GI PIPE LINE - Providing and laying fabricated GI specials as dimentionally mentioned made out of 12mm thick M.S plate, gas cutting to required size, rolling, tack welding, assembling to required size,welding on automatic welding machine including cost of materials T&P, consumables, & jointing materials as required, including hire and depriciation charges of machinaries & T&P meterials such as generators, welding machine etc. all complete, with provision of anticorrosive paint as directed by the concern Engineer in-charge including conveyance of the same to the work site, unloading and stacking in proper (a) Laying of 80 mm Dia GI Pipe on prepared surface.
40
-
1086.14
Providing and laying fabricated G.I specials as dimentionally mentioned made out of 8mm thick G.I plate, gas cutting to required size, rolling, tack welding, assembling to required size, welding on automatic welding machine including cost of materials as required including hire and depriciation charges of machinaries & T&P materials such as generators, welding machine etc. all complete with provision of anticorrosive paint as directed by the concern Engineer in-charge including conveyance of the same to the work site, unloading and stacking in proper position. (a) 80mm dia, 0.30mtr long 45°/ 90° plain Bend
1
-
1558.53
80mm x 80mm x 80 mm dia GI T
1
-
3054.3
Supply and fixing switch check type cast iron Non-Return Valves with double flanged ends for water works purposed for the following rating and nominal dia meter including cost of Non-Return Valves, bolts, Nuts and rubber insertion as required as per specification complete (a) 80mm Dia 16MPA CI NRV confirmingto IS 5312 (Part-I) 1984
1
-
4407.59
Supply and fixing of single Air Valve for water works purposes for the following diameter, including drilling the water main including cost of air valves, metal straps as per specification complete. (a) Single Air Valve (15mm to 25mm Dia meter)
1
-
1886.05
Supplying all materials, labour, T & P for constructing masonry chambers to accommodate non-return valves and sluice valves as per PH specification complete. (a) Sluice Valve & Non Return valve
1
-
8294
Display Board - Supplying all materials labour T&P for Construction of Display Board (1.5M. X 1.5M.)
1
-
4549
Operation & maintainance cost 5% for 5 years @ 1% per year
5
-
65930
PWS to village Pitaeripi & Sihuripanga - - Consrtuction of 4.00 mtr inside dia Intake well - Earthwork in all kinds of soil for excavation of well foundation trenches and column footings including dressing and levelling the bed & depositing the soil with initial lead of 50m & initial lift of 1.5 mtr as per direction of the Engineer in-charge
14.14
-
18879.02
Supplying all materials, labour, T&P , fabricating and fixing at site of steel cutting Edge suitable for following outer dia RCC/Masonry well through sinking process including providing and cutting of M.S Angle & Plates, bending to required shape, drilling holes, reverting and tack welding with automatic welding machine including providing and welding stiffeners at top & bottom of curved angle, supply & fixing of 16mm dia bond rods duly threaded with supply of M.S Nuts , Bolts & washers as per Design & Specification as follows.(a) Steel cutting Edge suitable for 5.05m outer dia RCC well / masonry well (i) The work should be fabricated in 04 (four pieces) for smooth fabrication including provision for jointing. (ii) The M.S Channels (100mmx100mmx10mm) & M.S plate (200mm wide & 10mm thick) to be used in this work should confirm to relevant I.S Specifications & to the corresponding ammendments if any. (iii) The vertical Bond Rod should be 900mm long threaded up to a distance of 150mm from bottom at one end. (iv) M.S Stiffeners in triangual pieces made out of 10mm thick M.S plate to be provided at a spacing 300mm from centre to centre at top and 300mm centre to centre at bottom of the Cutting Edge completely welded. (v) Horizontal Anchor bars made out of 16mm dia M.S Rod of 200mm lengh to be provided at a spacing 300mm centre to centre of the cutting Edge.
6.33
-
7500
Rigid smooth centering shuttering at all heights of work such as well kerb, well stening, well cap using required no. of vertical and horizontal supports of scaffolding with joists, NG rails and channels, steel shuttering plates including welding, bolting cost conveyance, royalty and all other taxes of all materials and cost of scaffolding gangway etc. including dismantling and depositing the debries away from work site complete to receive reinforcement grills and concrete as per requirement etc.
284.17
-
770.93
Supplying all materials, labour, T&P and providing RCC work of M20 grade with 20mm and down graded crusher broken hard granite chips including hoisting and laying, cost, conveyance, royalties and taxes of all materials, labour, T&P required for the work etc. complete as per direction of the Engineer in-charge.
66.67
-
5368.24
Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing & technical specification including cutting, bending, binding tying with cost & conveyance of MS rod & binding wire 18 to 20 gauge.
34
-
8450.76
5.05 mtr Outer dia RCC well sinking in all kinds of soils to lines, levels and plumb by scooping out from inside and below the steining including cost, hire and running charges of tools and plants, supplying & working of pumps, bailing out of water and removal of all materials and obstacle from inside the well by divers etc. including precaution against shifting and tilting, disposal of the soil away from the working area with all leads and lift complete as per direction of Engineer in-charge.
7
-
13875.96
5 mtr Outer dia RCC well sinking in soft rock to lines, levels and plumb by scooping out from inside and below the steining including cost, hire and running charges of tools and plants, supplying & working of pumps, bailing out of water and removal of all materials and obstacle from inside the well by divers etc. including precaution against shifting and tilting, disposal of the soil away from the working area with all leads and lift complete as per direction of Engineer in-charge.
0.5
-
112383.17
Fitting & Fixing of M.S walkway and Cover plate : Supply all materials, labour, T&P, welding rod , gas etc. fabricating and welding of different size of G.I pipe Angle, Joist, channel, flat of 4mm thickness for G.I. walk way & well cover including filling cavities / gap with C.C (1:2:4), priming, painting two coats with approved enamel paint on the top of the cover etc. complete as per the direction of the Engineer in-charge. (a) M.S Channel 50x100x50mm (6mm thick)
257.6
-
67
(b) M.S Angle of size 50x50x6mm
266
-
70
(c) M.S Angle of size 25x25x5mm
40.5
-
70
(d) M.S Flat 6mm thick
25.14
-
70
(e) 2.5mm thick M.S. Plate
491.79
-
75
Supply all materials, labour, T&P, taxes, welding rod , gas etc. fabricating and welding of different size of M.S pipe Angle, Joist, channel, flat for 5.00 mtr. dia Intake well to prevent entry of foreign materials making convenient for installation or withdrawing of pumping set including painting two coats with approved enamel paint on the top of the cover etc. complete as per the direction of the Engineer in-charge. (a) 80mm G.I. Pipe for chain pully stand
11
-
1086.14
40mm G.I Pipe for railing
51
-
504.49
Painting two coats with any approved enamel paint over a coat of primer including cost of all materials, labour, T&P etc. complete.
23.84
-
193.01
Construction of boundary wall around pump House & Storage Reservoir - Earth work in hard soil and gravelley soil within 50m, initial lead and 1.5, initial lift including rough dressing and breaking clods to maximum 5 cm to7 cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge.
45
-
18879.02
Filling in plinth with selected sand in the areas within initial lead & lift, including cost of materials, labours, T&P etc. complete.
9
-
382.56
Providing & laying cement concrete of proportion ( 1:4:8 )of 40mm downgraded stone aggregate of specified thickness for foundations below walls, column footings at any depth below floors etc. including centering, shuttering if required laying spreading, ramming, and curing etc.complete including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer.
9
-
4056.65
Providing and constructing Random rubble H.G. stone masonry at foundation in cement mortar 1:6 including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer.
32.4
-
3472.09
2.5cm Dam proof course (DPC) with CC (1:2:4) using 12mm size HBHG chips including cost, conveyance, royality, of all materials etc. complete as per direction of Engineer-in-charge.
36
-
297.57
Providing and constructing Brick masonry at all floors and locations using best approved quality fly ash bricks 25cmX12cmX8cm size having crushing strength not less than 75Kg/Sqm with dimentional tolerance +/- 8% in cement mortar (1:6)
27.05
-
4330.31
Providing and applying cement plaster 16mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P Taxes, curing etc. complete as direction of engineer.
134.38
-
205.52
Providing and applying cement plaster 12mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P Taxes, curing etc. complete as direction of engineer.
134.38
-
145.11
Finishing wall with water proofing cement paint two coats of approved shade on new plastered surface to give an even shade including cost, conveyance, royalities and taxes of materials, labour, T&P, required for the work etc. all complete
268.76
-
136.65
Filling in foundation & plinth with excavated materials including watering and ramming as directed by the engineer-in-charge.
5.4
-
113.45
providing and fixing ms fabricated gate to the boundery
45
-
70
Painting two coats with enamel paint over one coat of primer
0.9
-
193.01
Construction Pump Chamber of size 3mtr X 3mtr inside dimension - Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
12.42
-
204.22
Sand filling in foundation and plinth well watered and rammed including cost carriage and royalty(Head works site filling 120cum+ Pump House foundation 5.35 cum)
5.35
-
382.56
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
2.6
-
4056.65
Random rubble HG stone maonry in cement mortar (1:6) in foundation and plinth
7.9
-
3472.09
a.Fly Ash Brick masonry in CM (1:6) in foundation plinth including cost carriage royalty of all materials
0.82
-
4330.31
b. Fly Ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials
8.46
-
4363.64
Earth filling with excavated materials including watering and ramming etc all complete
3.36
-
113.45
Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete. a)R.C.C. Foundation, Plinth Bend
3.9
-
101.71
b) RCC Lintel
2.43
-
264.1
c)RCC Roof and chajja
15.77
-
429.25
RCC M20 with 12 mm size HG chips including hoisting lowering and laying the concrete including cost carriage royalty of all materials
2.61
-
5368.24
2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials
14.44
-
308.7
Supplying, fitting and placing uncoated HYSD bar reinforcement ( TATA/SAIL/VIZAG Made ) complete as per drawing & technical specification including cutting, bending, binding tying with cost & conveyance of MS rod & binding wire 10 to 20 gauge.
2.35
-
8450.76
12mm thick cement plaster (1:4) over brick masonry work including cement punning and bituminus painting over top of wall including cost carriage and royality of all materials
3.25
-
207.5
12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials
93.18
-
145.11
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete.
11.95
-
300.21
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips including cost carriage royalty of all materials etc all complete
4.05
-
318.9
Supplying all materials labour T&P and providing Weather coat to new plastered surface including transportation charges taxes etc all complete
93.18
-
136.65
Supplying all materials labour T&P and finishing walls with Plastic emulsion paint of approved shade with two coats to give an even shade including cost of paint and carriage charges etc all complete.
93.18
-
88.17
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )
90
-
75
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 4.50 kg / sqft )
73.5
-
70
Supplying all materials labour T&P and providing 5 cm thick RCC Shelf in cc(1:2:4) with CB HG Chips 12 mm size fitted and fixed in position finished smooth complete with all materials etc all complete
73.5
-
75
Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete
9.68
-
137.93
Fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials.
11.95
-
965.1
Fixing tiles in dados, skirting and risers of steps on 12mm cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.
5.5
-
1069.46
Providing & Fixing CHEQURED TILES in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.
15.21
-
499.59
Internal Electrification - Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge.
10
-
170
Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge.
2
-
165
Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required
7
-
32
Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. 32 Amp D.P.main switch with porcelain base
1
-
951
Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.63 Amp TPN Main switch
1
-
3506
Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
1555
Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
85
Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required.(a) 250mmx200mmx75mm
1
-
160
(b) 180mmx100mmx60mm
1
-
84
Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required a. 4x10 sqmm + 2x6 sqmm
5
-
460
b.3x10 sqmm + 1x6 sqmm
5
-
335
c.2x4 sqmm + 1x2.5 sqmm
2
-
125
d.2x2.5 sqmm + 1x1.5 sqmm
5
-
95
e.3x1.5 sqmm + 1x1.5 sqmm
2.5
-
90
Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction of the Engineer in charge. (a)Short point
2
-
330
b.Medium point
1
-
430
c.Long point
1
-
550
Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge.
2
-
435
Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. A.5 / 6 Amp one way switch (Piano type)
5
-
21
B.3 Pin 5/6 socket outlet (piano tytpe)
1
-
34
Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required.
15
-
58
Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required
0.3
-
530
Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc with charcoal and salt as required.
1
-
1875
PROCURMENT OF SUBMERSIBLE PUMP MOTOR AND ITS ACCESSORIES INCLUDING COST OF LOWERING ( The materials including with all taxes) - Supplying of Vertical / Open well submersible pump set in multistage construction with radial or mixed flow impellers coupeled with totaly enclosed water filled squirrel cage induction motor to operate at 2850rpm rated voltage 380-415 volt 50 Hz AC SINGLE /3phase power supply capable of discharging as noted below of any reputed make like KSB/CROMPTON/CRI/Kirloskar confirming to relevant IS specification IS 14220 for installing in RCC intake well /Percolation well. (a) 5.00 HP Pump Motor (head range - 90.00 mtr to 120.00 mtr and as per suitable to site condition )
2
-
28891.5
Supplying of 3 phase star delta controll pannel suitable for above submersible pump fitted with voltameter ,Ampermeter, selector, switch, main switch, fuse indicator ,connector,on/of switch with strater component with over load protection and single phasepreventor enclosed in a sheet steel encloser of any reputed make ( like BCH /switch and gear /L&T /Havells)
2
-
4000
ii) Procurement of submersible 4 sqmm flat cable of reputed make.
100
-
95.52
iii) Procurement of GI/GI column pipe of required dia (3mtr length) including fitting and fixture. a.40 mm dia
8
-
504.49
b. 40mm dia flanges
6
-
207.14
c. 40mm flange joint
4
-
136.26
d. 4 mm² PVC insulated wire rope with clamp
80
-
35
Installation of pumping set into Open well including fitting fixing of electrical accessories such as main switch, control pannel unit including jointing, lowering of column pipe & cable and incluiding bore clamp, bore cap etc as required complete.
2
-
4443
Rising main and Distribution system - Providing and laying fabricated G.I pipes of TATA/Jindal make and specials as dimentionally mentioned in proper position / alignment as directed by the concern Engineer in charge including conveyance from stores to site of work, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main / distribution system, welding on automatic welding machine including cost of all materials, labour, T&P , consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. (a) 80 mm dia G.I. Pipe (Medium class)
1190
-
1086.14
Providing and laying fabricated G.I specials as dimentionally mentioned made out of 8mm thick G.I plate, gas cutting to required size, rolling, tack welding, assembling to required size, welding on automatic welding machine including cost of materials as required including hire and depriciation charges of machinaries & T&P materials such as generators, welding machine etc. all complete with provision of anticorrosive paint as directed by the concerned Engineer in-charge including conveyance of the same to the work site, unloading and stacking in proper position. (a) 80mm dia x 8mm thick GI flange
4
-
450
80mm dia 0.30 long 90⁰/45⁰ plain bend
2
-
1590.95
Cutting
6
-
438.74
Welding
6
-
366.16
Laying in trenches HDPE pipes conforming to IS 4984-1995 & specials of following outside diameter & class 4 to class 5 & jointig by fusion welding Method including testig as per specification complete. (a) 90 mm Dia HDPE pipes PN-6
3330
-
333.42
Earth workwithin 50m, initial lead and 1.5, initial lift including rough dressing and breaking clods to maximum 5 cm to7 cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge.for laying pipe line incluiding refilling with excavated earth. (a) ALL KIND OF SOIL
1298.7
-
204.22
Refilling the pipe line trenches with the excavated earth including watering and raming as directed by the Engineer -in -charge.
1277.51
-
113.46
Supply and fixing switch check type cast iron Non-Return Valves with double flanged ends for water works purposed for the following rating and nominal dia meter including cost of Non-Return Valves, bolts, Nuts and rubber insertion as required as per specification complete. (a) 80mm Dia 16MPA CI NRV confirmingto IS 5312 (Part-I) 1984
2
-
4408.96
Supply and fixing of cast iron Sluice Valve with double flanged ends for water works purposes for the rollowing rating and nominal diameters including the cost of cast iron sluice valves, bolts, nuts and rubber insertion as per spefication complete. (a) 80mm Dia CI Sluice Valve with rating PN 1 confiming to IS:780-1984
8
-
4928.15
Supply and fixing of single Air Valve for water works purposes for the following diameter, including drilling the water main including cost of air valves, metal straps as per specification complete. (a) Single Air Valve (15mm to 25mm Dia meter)
5
-
1892.85
Supplying all materials labour T&P for construction of sluice valve chamber of size 0.90mx0.90mx1.05mtr (inside size) for SLUIE VALVE CHAMBER / NON RETURN VALVES with 10.00cm per cast cement concrete cover slab with CC (1:2:4) , earth work in hard soil for excavetion of foundation ,0.10mtr thich metal concrete (1:4:8) with 40mm size HBHG meteal , 0.25 mtr thick brick work woth CB brick of size 25cmx12cmx8cm having cruseing strenght not less then 75Kg/cm² in cement motar of propotion (1:6) in the wall of the chambers and inside plastering with 12cnm thick CP ( 1:4) finishing smooth with floating coat of net cement punning including curing as per approved drawing and specification including cost, conveyance, royality and taxes of all materials labour T&P as required for the work complete as per the direction of the concern Engineer-in- charge. ( On GI Pipe)
10
-
13239
Supplying all material, labour T&P for constructing chambers of size 0.75mX0.75mX0.15m (in side) for AIR VALVES with 10cm thick precast cement concrete cover slab with CC (1:2:4) mix. Earthwork in hard soils for excavation of foundation 0.10mtr thick, foundation concrete (1:4:8) with 40mm size HBHG metal, 250 mm thick brick work with CB bricks of size 25cmX12cmX8cm having crushing strength not less than 75kg/cm2 in cement mortar of proportion(1:6) in the wall of the chamber and in side plastering with 16mm thick C.M (1:6) finished smooth with coat of neat cement punning including curing as per approved drawing and specification as enclosed including cost, conveyance, royalities and taxes of all materials, labour, T&P as required for the work complete as per direction of the concerned Engineer-in-charge.
5
-
10637
INDIVIDUAL HOUSE HOLD WATER SUPPLY CONNECTION BY TAP Supplying all materials labour T&P for fitting and fixing of metal or PVC febricated shadle with suitable o ring, nuts and bolts etc with 1/8'' inch dia GM ferrule cock ,required 15mm to 20mm dia GI fittings,20mm dia GI pipe of 1.00 mtr length , making concrete block with 110mm OD PVC pipe of required length for stand point ,cutting hole through brick/ stone masonary wall with necessary earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
46
-
1892
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages (For FHTC)
46
-
92
Supplying all materials labour T&P for laying of 20mm dia HDPE pipe (PE-80,PN -10) incluiding earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
230
-
71.4
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages
40
-
649.33
Cutting Metal road for taking pipe line and making good to the damages
25
-
311.94
Storage Reservoir - Designing, Testing and commissioning of R.C.C ESR of 30,000 ltr of 10mtr staging with suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc. including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the ESR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
1319681
SUPPLYING, FITTING & FIXING OF 20M3/HR CAPACITY PRESSURE FILTER AS PER APPROVED DESIGN AND SPECIFICATION - Construction of M.S Filter Tank of size 1500mm dia x 2300mm ht with Dish end with man hold & hand hole cover. Plate thickness of body 8mm , Dish end 10 mm and bed plate 12mm , Bed plate supported with M.S Joist and Angles and leg fitted with Joist with hydraulic and fabrication charges and other @ materials, 50mm dia M.S face pipe line for filter including inlet and outlet, backwash drain line, ridgeline as per approved design including fabrication charges, G.I. Nut bolt and Packing, installation of Airline 20mm size with bulb valve, Electronic chlorine dozer, Air Compressor (1/2H.P) 3 Phase with DOL starter, laying of Catalytic Filter Media, P.V.C Strainer with fixing of 80mm C.I. Butterfly Valve, Erection, Testing and Commissioning with civil foundation charges, Painting Charges both inside and outside including all transportaion charges.
1
-
400000
B. Construction of 50,000 Ltr Capacity OGR - Designing, Testing and commissioning of R.C.C 50KL UGR with suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc., construction of RCC drain including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the UGR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
621685.6
C. LAYING OF GI PIPE LINE - Providing and laying fabricated GI specials as dimentionally mentioned made out of 12mm thick M.S plate, gas cutting to required size, rolling, tack welding, assembling to required size,welding on automatic welding machine including cost of materials T&P, consumables, & jointing materials as required, including hire and depriciation charges of machinaries & T&P meterials such as generators, welding machine etc. all complete, with provision of anticorrosive paint as directed by the concern Engineer in-charge including conveyance of the same to the work site, unloading and stacking in proper (a) Laying of 80 mm Dia GI Pipe on prepared surface.
40
-
1086.14
Providing and laying fabricated G.I specials as dimentionally mentioned made out of 8mm thick G.I plate, gas cutting to required size, rolling, tack welding, assembling to required size, welding on automatic welding machine including cost of materials as required including hire and depriciation charges of machinaries & T&P materials such as generators, welding machine etc. all complete with provision of anticorrosive paint as directed by the concern Engineer in-charge including conveyance of the same to the work site, unloading and stacking in proper position. (a) 80mm dia, 0.30mtr long 45°/ 90° plain Bend
1
-
1558.53
80mm x 80mm x 80 mm dia GI T
1
-
3054.3
Supply and fixing switch check type cast iron Non-Return Valves with double flanged ends for water works purposed for the following rating and nominal dia meter including cost of Non-Return Valves, bolts, Nuts and rubber insertion as required as per specification complete (a) 80mm Dia 16MPA CI NRV confirmingto IS 5312 (Part-I) 1984
1
-
4407.59
Supply and fixing of single Air Valve for water works purposes for the following diameter, including drilling the water main including cost of air valves, metal straps as per specification complete. (a) Single Air Valve (15mm to 25mm Dia meter)
1
-
1886.05
Supplying all materials, labour, T & P for constructing masonry chambers to accommodate non-return valves and sluice valves as per PH specification complete. (a) Sluice Valve & Non Return valve
1
-
8294
Display Board - Supplying all materials labour T&P for Construction of Display Board (1.5M. X 1.5M.)
1
-
4549
Operation & maintainance cost 5% for 5 years @ 1% per year
5
-
75050
PWS to village Radhabali - Construction of 5.00m Inside Dia Stone Masonry Percolation Well - Earthwork in openwell excavation in hard soil or gravelly soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking colds to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer in charge. (a) 1st depth of 1.5m
83.16
-
18879.02
2nd depth of 1.5m
83.16
-
25848.89
Earthwork in openwell ecavation in stoney earth and gravels mixed with stone boulders not exceeding 0.14 cum in volumn within 50m initial lead including rough dress and breaking colds to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per specification. (a) 3rd depth of 1.5m
83.16
-
52821.01
4th depth of 1.5m
71.7
-
66588.8
5th depth of 1.5m
71.7
-
80356.58
6th depth of 1.5m
61.1
-
94124.36
Cutting disintigrated rock not requiring blasting to be removed by pick axes and crow and depositing materials within 50mtr initiallead and 1.5mtr initial lift including rough dressing as per specification & direction of the depertmrnt including stacking the usefull materials separately as ordered. (a) 7th depth of 1.5m
24.44
-
169270.91
Excavation of Hard rock (granite) removed by chiselling including dressing and levelling the bed at required depth and depositing the soil within all lead & lift and as per specification & approved by the departmrnt.
12.22
-
2493.79
Providing dry stone masonry or rough stone dry masonry in well staining below ground level beyond 4.5mtr depth to 7.5 mtr all labour, T & P, including cost, conveyance, royalities & taxes of all materials required for the work etc. complete as per direction of Engineer in charge.
46.55
-
1648.28
Labour charges for providing strong, rigid, levelled, and plumbed centering and shuttering to required shapre and size with all necessary bracing and ties and support with levelled centering including dismentalling the same after the required interval from the date of casting including cost of materials, labour, T & P required for the work etc complete as per direction of Engineer-in-charge. (a) 1st Bracing
7.42
-
1056.13
2nd Bracing
7.42
-
880.11
3rd Bracing
7.23
-
880.11
Top Bracing (Centering & Shuttering)
8.66
-
733.42
Supplying all materials, labour, T&P and providing RCC work of (1:1.5:3) grade with 20mm and Down grade crusher broken black hard granite chips including oisting and laying, cost, conveyance, royalities and taxes of all materias, labour, T&P required for the work etc. complete as per direction of the Engineer-in-charge. (a) 1st bracing (beyond 4.5 mtr)
6.68
-
7569.25
3rd bracing (beyond 1.5mtr)
2.71
-
7469.4
Top Bracing
2.76
-
7168.97
Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing & technical specification including cutting, bending, binding tying with cost & conveyance of MS rod & binding wire 10 to 20 gauge. (a) Beyond 4.5mtr
6
-
8450.76
Providing RRHG Stone Masonary in CM (1:6) upto Plinth level of layer not exceeding 30cm using HG stone of approved quality from approved quarry inclding mixing of mortar, breaking of stne as per required size, laying, watering and curing, including cost, conveyance, royalities & taxes of all materials, labour and T & P required for the work etc. complete as per direction of Engineer in charge. (a) Beyond 4.5 mtr
46.55
-
3946.93
Beyond 1.5m & upto 4.5mtr
37.77
-
3846.33
Witnin 1.5mtr
26.22
-
3544.51
Metal spall backing to the rear side of well steining using 5cm size HG metal including all cost of materials, labour, T & P etc complete.
9.24
-
1014.11
Filling with excavated materials including watering and ramming as directed by Engineer-in-charge
132.12
-
10488.35
Supplying all materials, labour, T&P and filling foundation and plinth with sand duly watered and rammed including cost, conveyance, royalities and taxes of all materias, labour, T&P required for the work etc. complete as per direction of the Engineer-in-charge.
3.44
-
382.56
Providing 20mm thick cement plaster (1:4) of the rough surface of masonry, racking out joints, including scrapping and cleaning the surface and finishing smooth to proper plumb and levels and providing grooves, all T & P etc including cost, conveyance, royalities and taxes of all materials required for the work complete.
30.05
-
228.31
Dewatering during excavetion and other constructional work
210
-
51.3
Supplying all labour, T&P for providing C.C (1:4:8) with 4cm H.G Metal platform arround well
2.46
-
4056.65
Supplying, Fixing And Fitting Of Cover Slab For 6.00 Mtr Outer Dia Stone Masonary Percolation Well - Supply all materials, labour, T&P, Welding rods, gas etc. for fabricating and welding of different sizes of MS angles, joist channel, MS/G.I pipe, flat and sheets of 4mm thick as per the required site condition for covering the 5mtr dia RCC/ Masonary well with MS/G.I ralling, necessary precaution to prevent entry of foreign materials like leaves, earth and dust into the well, filling cavities & gaps with CC(1:2:4), finished smooth including painting two coats with approved enamel paint over a coat of redoxide primer to sheet, channel and ralling complete including GST & cess , as per the direction of Engineer-in-charge. (a) MS Channel of size (100X 50 X 50 X 6 )mm
353.72
-
67
MS Anglel of size (60X 60 X 6 )mm
73.44
-
70
MS Anglel of size (50 X 50 X 6 )mm
59.5
-
70
Walk way
74.25
-
70
Foot stair
8.5
-
70
2.5mm thick ms plate covering
794.21
-
75
Providing and Laying fabricated G.I pipes and specials as dimentionaly mentioned in proper position / alignment as directed by the concern Engineer in charge including cost, conveyance, loading, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main/distrubution system, welding on automatic welding machine including cost of all materials, labour, T&P consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete..(a) 80mm dia G.I Pipe chain pully stand
11
-
1086.14
G.I pipe railing 40 mm dia
56.91
-
504.49
Painting two coats with any approved enamel paints over a coat of redoxide primer including cost of all materials and labour charges etc. complete.
34.19
-
193.01
Construction of boundary wall around pump House & Storage Reservoir - Earth work in hard soil and gravelley soil within 50m, initial lead and 1.5, initial lift including rough dressing and breaking clods to maximum 5 cm to7 cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge.
45
-
18879.02
Filling in plinth with selected sand in the areas within initial lead & lift, including cost of materials, labours, T&P etc. complete.
9
-
382.56
Providing & laying cement concrete of proportion ( 1:4:8 )of 40mm downgraded stone aggregate of specified thickness for foundations below walls, column footings at any depth below floors etc. including centering, shuttering if required laying spreading, ramming, and curing etc.complete including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer.
9
-
4056.65
Providing and constructing Random rubble H.G. stone masonry at foundation in cement mortar 1:6 including cost & conveyance of all labour, materials, T&P, taxes etc as per direction of engineer.
32.4
-
3472.09
2.5cm Dam proof course (DPC) with CC (1:2:4) using 12mm size HBHG chips including cost, conveyance, royality, of all materials etc. complete as per direction of Engineer-in-charge.
36
-
297.57
Providing and constructing Brick masonry at all floors and locations using best approved quality fly ash bricks 25cmX12cmX8cm size having crushing strength not less than 75Kg/Sqm with dimentional tolerance +/- 8% in cement mortar (1:6)
27.05
-
4330.31
Providing and applying cement plaster 16mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P Taxes, curing etc. complete as direction of engineer.
134.38
-
205.52
Providing and applying cement plaster 12mm thick at all floors in cement mortar 1:6 in brick/ concrete surface finishing smooth to correct line, level plans & plumb as required, curing etc. complete all as shown and as per specification & Cost of all materials, labours, T&P Taxes, curing etc. complete as direction of engineer.
134.38
-
145.11
Finishing wall with water proofing cement paint two coats of approved shade on new plastered surface to give an even shade including cost, conveyance, royalities and taxes of materials, labour, T&P, required for the work etc. all complete
268.76
-
136.65
Filling in foundation & plinth with excavated materials including watering and ramming as directed by the engineer-in-charge.
5.4
-
113.45
providing and fixing ms fabricated gate to the boundery
45
-
70
Painting two coats with enamel paint over one coat of primer
0.9
-
193.01
Construction Pump Chamber of size 3mtr X 3mtr inside dimension - Earth work in excavation in foundation in all kinds of soil with in 50 m initial lead and 1.50 m initial lift including breaking of clods to maximum 5 cm to 7 cm in size and laying in layer not less than 0.30 m depth including leveling and dressing the bed etc all complete
12.42
-
204.22
Sand filling in foundation and plinth well watered and rammed including cost carriage and royalty(Head works site filling 120cum+ Pump House foundation 5.35 cum)
5.35
-
382.56
CC(1:4:8) with 4 cm size HG metal including cost carriage royalty of all materials
2.6
-
4056.65
Random rubble HG stone maonry in cement mortar (1:6) in foundation and plinth
7.9
-
3472.09
a.Fly Ash Brick masonry in CM (1:6) in foundation plinth including cost carriage royalty of all materials
0.82
-
4330.31
b. Fly Ash Brick masonry in CM (1:6) in superstructure including cost carriage royalty of all materials
8.46
-
4363.64
Earth filling with excavated materials including watering and ramming etc all complete
3.36
-
113.45
Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete. a)R.C.C. Foundation, Plinth Bend
3.9
-
101.71
b) RCC Lintel
2.43
-
264.1
c)RCC Roof and chajja
15.77
-
429.25
RCC M20 with 12 mm size HG chips including hoisting lowering and laying the concrete including cost carriage royalty of all materials
2.61
-
5368.24
2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips on new work including cost carriage royalty of all materials
14.44
-
308.7
Supplying, fitting and placing uncoated HYSD bar reinforcement ( TATA/SAIL/VIZAG Made ) complete as per drawing & technical specification including cutting, bending, binding tying with cost & conveyance of MS rod & binding wire 10 to 20 gauge.
2.35
-
8450.76
12mm thick cement plaster (1:4) over brick masonry work including cement punning and bituminus painting over top of wall including cost carriage and royality of all materials
3.25
-
207.5
12mm thick cement plaster (1:6) over brick masonry work including cost carriage and royality of all materials
93.18
-
145.11
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete.
11.95
-
300.21
Supplying all materials, labour, T&P and providing 2.5cm thick AS flooring with C.C.(1: 2:4) with 12mm size HG chips including cost carriage royalty of all materials etc all complete
4.05
-
318.9
Supplying all materials labour T&P and providing Weather coat to new plastered surface including transportation charges taxes etc all complete
93.18
-
136.65
Supplying all materials labour T&P and finishing walls with Plastic emulsion paint of approved shade with two coats to give an even shade including cost of paint and carriage charges etc all complete.
93.18
-
88.17
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded window (2 leaf) shutter with frame and grill.Frame made up of 40mmx40mmx6mm size angle,shutter made up of 30mmx30mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet and window grill made up of 19mmx5mm size flat with hinge, Aldrop and locking arrangement painted with two coats red oxide paint all complete.( @ 6kg / sqft )
90
-
75
Supplying all materials labour T&P and fitting and fixing of MS fabricated,welded Door (2 leaf) shutter with frame .Frame made up of 50mmx50mmx6mm size angle,shutter made up of 35mmx35mmx5mm size angle,19mmx5mm flat and 18gauge GI sheet with hinge, Aldrop and locking arrangement on two side painted with two coats red oxide paint all complete.( @ 4.50 kg / sqft )
73.5
-
70
Supplying all materials labour T&P and providing 5 cm thick RCC Shelf in cc(1:2:4) with CB HG Chips 12 mm size fitted and fixed in position finished smooth complete with all materials etc all complete
73.5
-
75
Supplying all materials labour T&P Painting two coats with approved paint over a coat of primer on MS Door and window including cost of paint and primer etc all complete
9.68
-
137.93
Fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 course sand) and filling joints with white cement of approved quality including cost of all materials.
11.95
-
965.1
Fixing tiles in dados, skirting and risers of steps on 12mm cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.
5.5
-
1069.46
Providing & Fixing CHEQURED TILES in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles.
15.21
-
499.59
Internal Electrification - Supplying all materials, labour, T&P and fitting, fixing and jointing of 16 sqmm , 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor from existing pole / transformer to the main switch including clamping the same on horizontal / vertical wall surfaces completed with all accessories and connections and as per direction of Engineer in charge.
10
-
170
Supplying and making termination with brass compression gland and aluminium lugs for 16 sqmm 3½ core PVC armoured power cable of 1.1 KV grade with aluminium conductor as required complete as per direction of Engineer in charge.
2
-
165
Laying and fixing of PVC insulated and PVC seathed armoured power cable of 11 KV grade on horizontal / vertical wall surface as required
7
-
32
Supply, installation, testing and commissioning of DP mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge. 32 Amp D.P.main switch with porcelain base
1
-
951
Supply, installation, testing and commissioning of TPN mainswitches of the following capacity confirming to IS:13940,Pt.3 / 1993 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc. as required as per direction of the Engineer in-charge.63 Amp TPN Main switch
1
-
3506
Supplying and fixing 3 nos. 100 Amp. 415 V. Kit kat of ISI marked confirming to IS 2086/1993 with neutral connector mounted on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
1555
Supplying and fixing 3 nos.phase indicating lamps on existing switch box / cover fixed wall surface complete with all accessories and connections.
1
-
85
Supplying and fixing 16/18 SWG metal box of following nominal sizes on surface / recess with suitable size phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recess conduit as required.(a) 250mmx200mmx75mm
1
-
160
(b) 180mmx100mmx60mm
1
-
84
Recess wiring to sub-main in following Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic heavy duty flexible conduit, 1.6mm thick along with following sizes fire resistant PVC insulated single core multi stand copper conductor as earth wire as required a. 4x10 sqmm + 2x6 sqmm
5
-
460
b.3x10 sqmm + 1x6 sqmm
5
-
335
c.2x4 sqmm + 1x2.5 sqmm
2
-
125
d.2x2.5 sqmm + 1x1.5 sqmm
5
-
95
e.3x1.5 sqmm + 1x1.5 sqmm
2.5
-
90
Recess wiring to light point / fan point / exhaust point / call bell point with 1.5sqmm Fire resistant PVC insulated single core multi stand copper conductor of ISI marked confirming to IS:694/1990 in 20mm dia non metalic PVC flexible conduit, 1.6mm thick with 5 Amp, 250 Volt Piano type Switch ISI marked and Ceilling Rose ISI marked mounted on M.S.Box having front bakelite cover of suitable size with M.S Box and along with 1.5 sqmm fire resistant PVC insulated single core multi stand copper conductor as earth wire including all accessories and connections as per direction of the Engineer in charge. (a)Short point
2
-
330
b.Medium point
1
-
430
c.Long point
1
-
550
Supplying and fixing of superior type C.I.bulk head fittings (heavy duty) ISI marked square / conical ttype with pre metalic glass cover provided with gulvamnised steel wire guard with necessary fittings and connections as per direction of Engineer in charge.
2
-
435
Supplying and fixing of the following Piano type switch / socket on the existing switch box / cover including connectioons etc. as required. A.5 / 6 Amp one way switch (Piano type)
5
-
21
B.3 Pin 5/6 socket outlet (piano tytpe)
1
-
34
Supplying and laying 8 SWG copper wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required.
15
-
58
Supplying and laying 25mmx5mm copper strip on surface or in recess for connection etc. as required
0.3
-
530
Earthing with G.I. earth pipe 3 mtr. Long 40mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipes etc with charcoal and salt as required.
1
-
1875
PROCURMENT OF SUBMERSIBLE PUMP MOTOR AND ITS ACCESSORIES INCLUDING COST OF LOWERING ( The materials including with all taxes) - Supplying of Vertical / Open well submersible pump set in multistage construction with radial or mixed flow impellers coupeled with totaly enclosed water filled squirrel cage induction motor to operate at 2850rpm rated voltage 380-415 volt 50 Hz AC SINGLE /3phase power supply capable of discharging as noted below of any reputed make like KSB/CROMPTON/CRI/Kirloskar confirming to relevant IS specification IS 14220 for installing in RCC intake well /Percolation well. (a) 3.00 HP Pump Motor (head range - 90.00 mtr to 120.00 mtr and as per suitable to site condition )
2
-
16551
Supplying of 3 phase star delta controll pannel suitable for above submersible pump fitted with voltameter ,Ampermeter, selector, switch, main switch, fuse indicator ,connector,on/of switch with strater component with over load protection and single phasepreventor enclosed in a sheet steel encloser of any reputed make ( like BCH /switch and gear /L&T /Havells)
2
-
4000
ii) Procurement of submersible 4 sqmm flat cable of reputed make.
100
-
95.52
iii) Procurement of GI/GI column pipe of required dia (3mtr length) including fitting and fixture. a.40 mm dia
8
-
504.49
b. 40mm dia flanges
8
-
207.14
c. 40mm flange joint
4
-
136.26
d. 4 mm² PVC insulated wire rope with clamp
80
-
35
Installation of pumping set into Open well including fitting fixing of electrical accessories such as main switch, control pannel unit including jointing, lowering of column pipe & cable and incluiding bore clamp, bore cap etc as required complete.
2
-
4443
Rising main and Distribution system - Providing and laying fabricated G.I pipes of TATA/Jindal make and specials as dimentionally mentioned in proper position / alignment as directed by the concern Engineer in charge including conveyance from stores to site of work, unloading and stacking in proper position, laying on prepared surface, gas cutting to required size, rolling, tack welding, assembling in suitable length to form rising main / distribution system, welding on automatic welding machine including cost of all materials, labour, T&P , consumables & jointing materials as required for execution of the said work including hire and depriciation charges of machinaries such as generators, welding machine etc. all complete, including testing the pipe line to required hydraulic pressure complete. (a) 80 mm dia G.I. Pipe (Medium class)
1210
-
1086.14
Providing and laying fabricated G.I specials as dimentionally mentioned made out of 8mm thick G.I plate, gas cutting to required size, rolling, tack welding, assembling to required size, welding on automatic welding machine including cost of materials as required including hire and depriciation charges of machinaries & T&P materials such as generators, welding machine etc. all complete with provision of anticorrosive paint as directed by the concerned Engineer in-charge including conveyance of the same to the work site, unloading and stacking in proper position. (a) 80mm dia x 8mm thick GI flange
4
-
450
80mm dia 0.30 long 90⁰/45⁰ plain bend
2
-
1590.95
Cutting
6
-
438.74
Welding
6
-
366.16
Laying in trenches HDPE pipes conforming to IS 4984-1995 & specials of following outside diameter & class 4 to class 5 & jointig by fusion welding Method including testig as per specification complete. (a) 90 mm Dia HDPE pipes PN-6
1635
-
333.42
Earth workwithin 50m, initial lead and 1.5, initial lift including rough dressing and breaking clods to maximum 5 cm to7 cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge.for laying pipe line incluiding refilling with excavated earth. (a) ALL KIND OF SOIL
637.65
-
204.22
Refilling the pipe line trenches with the excavated earth including watering and raming as directed by the Engineer -in -charge.
627.24
-
113.46
Supply and fixing switch check type cast iron Non-Return Valves with double flanged ends for water works purposed for the following rating and nominal dia meter including cost of Non-Return Valves, bolts, Nuts and rubber insertion as required as per specification complete. (a) 80mm Dia 16MPA CI NRV confirmingto IS 5312 (Part-I) 1984
2
-
4408.96
Supply and fixing of cast iron Sluice Valve with double flanged ends for water works purposes for the rollowing rating and nominal diameters including the cost of cast iron sluice valves, bolts, nuts and rubber insertion as per spefication complete. (a) 80mm Dia CI Sluice Valve with rating PN 1 confiming to IS:780-1984
7
-
4928.15
Supply and fixing of single Air Valve for water works purposes for the following diameter, including drilling the water main including cost of air valves, metal straps as per specification complete. (a) Single Air Valve (15mm to 25mm Dia meter)
4
-
1892.85
Supplying all materials labour T&P for construction of sluice valve chamber of size 0.90mx0.90mx1.05mtr (inside size) for SLUIE VALVE CHAMBER / NON RETURN VALVES with 10.00cm per cast cement concrete cover slab with CC (1:2:4) , earth work in hard soil for excavetion of foundation ,0.10mtr thich metal concrete (1:4:8) with 40mm size HBHG meteal , 0.25 mtr thick brick work woth CB brick of size 25cmx12cmx8cm having cruseing strenght not less then 75Kg/cm² in cement motar of propotion (1:6) in the wall of the chambers and inside plastering with 12cnm thick CP ( 1:4) finishing smooth with floating coat of net cement punning including curing as per approved drawing and specification including cost, conveyance, royality and taxes of all materials labour T&P as required for the work complete as per the direction of the concern Engineer-in- charge. ( On GI Pipe)
9
-
13239
Supplying all material, labour T&P for constructing chambers of size 0.75mX0.75mX0.15m (in side) for AIR VALVES with 10cm thick precast cement concrete cover slab with CC (1:2:4) mix. Earthwork in hard soils for excavation of foundation 0.10mtr thick, foundation concrete (1:4:8) with 40mm size HBHG metal, 250 mm thick brick work with CB bricks of size 25cmX12cmX8cm having crushing strength not less than 75kg/cm2 in cement mortar of proportion(1:6) in the wall of the chamber and in side plastering with 16mm thick C.M (1:6) finished smooth with coat of neat cement punning including curing as per approved drawing and specification as enclosed including cost, conveyance, royalities and taxes of all materials, labour, T&P as required for the work complete as per direction of the concerned Engineer-in-charge.
4
-
10637
INDIVIDUAL HOUSE HOLD WATER SUPPLY CONNECTION BY TAP Supplying all materials labour T&P for fitting and fixing of metal or PVC febricated shadle with suitable o ring, nuts and bolts etc with 1/8'' inch dia GM ferrule cock ,required 15mm to 20mm dia GI fittings,20mm dia GI pipe of 1.00 mtr length , making concrete block with 110mm OD PVC pipe of required length for stand point ,cutting hole through brick/ stone masonary wall with necessary earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
19
-
1892
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages (For FHTC)
19
-
92
Supplying all materials labour T&P for laying of 20mm dia HDPE pipe (PE-80,PN -10) incluiding earth work excavation in all kind of soil and refilling the trenchecheds after laying incluiding testing all complete as per PH specification.
95
-
71.4
Supplying all material ,labour T&P for Cutting cement concrete road for taking pipe line and making good to the damages
25
-
649.33
Cutting Metal road for taking pipe line and making good to the damages
10
-
311.94
Storage Reservoir - Designing, Testing and commissioning of R.C.C ESR of 30,000 ltr of 10mtr staging with suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc. including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the ESR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
1319681
SUPPLYING, FITTING & FIXING OF 20M3/HR CAPACITY PRESSURE FILTER AS PER APPROVED DESIGN AND SPECIFICATION - Construction of M.S Filter Tank of size 1500mm dia x 2300mm ht with Dish end with man hold & hand hole cover. Plate thickness of body 8mm , Dish end 10 mm and bed plate 12mm , Bed plate supported with M.S Joist and Angles and leg fitted with Joist with hydraulic and fabrication charges and other @ materials, 50mm dia M.S face pipe line for filter including inlet and outlet, backwash drain line, ridgeline as per approved design including fabrication charges, G.I. Nut bolt and Packing, installation of Airline 20mm size with bulb valve, Electronic chlorine dozer, Air Compressor (1/2H.P) 3 Phase with DOL starter, laying of Catalytic Filter Media, P.V.C Strainer with fixing of 80mm C.I. Butterfly Valve, Erection, Testing and Commissioning with civil foundation charges, Painting Charges both inside and outside including all transportaion charges.
1
-
400000
B. Construction of 50,000 Ltr Capacity OGR - Designing, Testing and commissioning of R.C.C 50KL UGR with suplying fitting, fixing of all materials, labour with fitting and fixing of sluice valves, Puddle collar, M.S / Aluminium stair , M.H cover,Jally as per specification etc., construction of RCC drain including testing, commissioning and clearance of site as per instruction Engineer-in-charge. N.B-The tenderer will have to submit detailed drawing, design and soil testing report from competent Government approved authority for the UGR after making Agreement with the Superintending Engineer, RWS&S Division, Phulbani before execution of the work.
1
-
621685.6
C. LAYING OF GI PIPE LINE - Providing and laying fabricated GI specials as dimentionally mentioned made out of 12mm thick M.S plate, gas cutting to required size, rolling, tack welding, assembling to required size,welding on automatic welding machine including cost of materials T&P, consumables, & jointing materials as required, including hire and depriciation charges of machinaries & T&P meterials such as generators, welding machine etc. all complete, with provision of anticorrosive paint as directed by the concern Engineer in-charge including conveyance of the same to the work site, unloading and stacking in proper (a) Laying of 80 mm Dia GI Pipe on prepared surface.
40
-
1086.14
Providing and laying fabricated G.I specials as dimentionally mentioned made out of 8mm thick G.I plate, gas cutting to required size, rolling, tack welding, assembling to required size, welding on automatic welding machine including cost of materials as required including hire and depriciation charges of machinaries & T&P materials such as generators, welding machine etc. all complete with provision of anticorrosive paint as directed by the concern Engineer in-charge including conveyance of the same to the work site, unloading and stacking in proper position. (a) 80mm dia, 0.30mtr long 45°/ 90° plain Bend
1
-
1558.53
80mm x 80mm x 80 mm dia GI T
1
-
3054.3
Supply and fixing switch check type cast iron Non-Return Valves with double flanged ends for water works purposed for the following rating and nominal dia meter including cost of Non-Return Valves, bolts, Nuts and rubber insertion as required as per specification complete (a) 80mm Dia 16MPA CI NRV confirmingto IS 5312 (Part-I) 1984
1
-
4407.59
Supply and fixing of single Air Valve for water works purposes for the following diameter, including drilling the water main including cost of air valves, metal straps as per specification complete. (a) Single Air Valve (15mm to 25mm Dia meter)
1
-
1886.05
Supplying all materials, labour, T & P for constructing masonry chambers to accommodate non-return valves and sluice valves as per PH specification complete. (a) Sluice Valve & Non Return valve
1
-
8294
Display Board - Supplying all materials labour T&P for Construction of Display Board (1.5M. X 1.5M.)
1
-
4549
Operation & maintainance cost 5% for 5 years @ 1% per year
5
-
66140
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements