Rural Water Supply And Sanitation Department Tender

FA brick masonry in C.M. (1.6) using bricks of 23cm. x 11 cm x 8 cm. size having crushing strength of 100kg/cm2 to 149 kg cm2 after immersing the bricks for six hours in water before use in superstructure including making all necessary projection, watering and curing etc. complete with cost, conveyance and royalty of all materials and supply of all labour and T&P required for work complete.a ) Foundation & Plinth

b )Supper Structure

Rigid and smooth centering and shuttering for RCC works for wall of well steining, Roof slab, lintel, chhajah, beam etc, including false work and dismantling them after casting including cost, taxes and conveyance charges of all materials to work site for centring and shuttering and false work with supply of all labour and T&P complete as directed by the Engineer-in-charge.(Pump House )a) Plinth Bend

b) RCC lintel .

c) RCC roof slab and chhajah .

Straightening bent up or coiled M.S.rod/ Tor steel including cutting, bending, cranking, hooking, welding or jointing if necessary, binding and tying the grills and placing in position as required for RCC works, providing fan hooks with hoisting, lowering including cost, taxes and conveyance charges of M.S.Rod/Tor Steel and binding wire 18 to 20 gauges required for the work complete as directed by the Engineer-in-charge

Cement concrete M-20 (1:1.5:3) for RCC works having a minimum compressive strength confirming to IS-456 in 15 cm. cubes in 28 days curing after mixing and tests conducted in accordance with IS-456 and IS-516 using 20 mm down size clean hard black crusher broken granite chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete and finishing the exposed surface smooth with watering and curing for four weeks including cost,taxes, royalty and conveyance charges of all materials to worksite with supply of all labour and T&P required for the work complete as directed by the Engineer-in-charge.

12 mm thick cement plaster (1:6) finished smooth to brick work after racking out joints including watering and curing with cost, taxes, royalty and conveyance charges of all materials to work site and supply of all labour and T&P required for the work complete as directed by the Engineer-in-charge.

12 mm thick cement plaster (1:4) finished smooth to brick work with cement punning & bitumen painting including watering and curing with cost, taxes, royalty and conveyance charges of all materials to work site and supply of all labour and T&P required for the work complete as directed by the Engineer-in-charge.

12 mm thick cement plaster (1:4) finished smooth to brick work with cement punning including watering and curing with cost, taxes, royalty and conveyance charges of all materials to work site and supply of all labour and T&P required for the work complete as directed by the Engineer-in-charge.

16 mm thick cement plaster (1:6) finished smooth over brick work with cement punning including watering and curing with cost, taxes, royalty and conveyance charges of all materials to work site and supply of all labour and T&P required for the work as directed by the Engineer-in-charge.

White washing two coats with approved good shell lime over the surface of the brick wall including cost, taxes and conveyance charges of all materials with supply of labour and T&P, gum, indigo required for the work as directed by the Engineer-in-charge.

Finishing wall with water proofing cement paint two coats with any approved water proof cement paint of approved shade including cost, carriage and taxes of all materials etc. complete including cost of Cement paint with supply of labour and T&P, gum, indigo required for the work as directed by the Engineer-in-charge.

M.S. panel door and window with grills double leafed with M.S. frame with m.s. frame overall size including frame of 1.95mtr heightx0.90 mtr. width for door and 1.20mtr. heightx0.90mtr. width for window madeout of 35mmx35mmx6mm M.S. angle frame and shutter 1.00 C.R.sheet Panel stiffness covering width of each leaf-90x5mtr. M.S. flat as per approved size and specification etc. complete including cost of all materials as per the direction of Engineer-in-Charge.

Painting two coats with any approved paintover a coat of priming over iron work including all labour cost carriage & royalty of all materials etc. complete. as directed by Engineer-in-charge.

2.5 cm. thick A.S. flooring with cement concrete 1:2:4 using 12mm size clean crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering. laying and compacting concrete. watering and curring complete including cost, conveyance and royalty of all materials and supply of all labour and T&P required for the work complete.

20 mm thick grading plaster (1:4) finished smooth over roof slab including watering and curing with cost, taxes, royalty and conveyance charges of all materials to work site and supply of all labour and T&P required for the work as directed by the Engineer-in-charge.

Supplying and fixing of 20" ceramic Pan with P trap and foot Rest etc complete

Piping arrangement up to soak pit with inspection Chamber etc complete

Leach pit with RCC ring inner dia 0.90m and depth of 0.90 mtr with RCC cover slab including excavation of earth work etc complete

A ) HEAD WORKS:- V) :- Internal Electrification -- For 1 No. Pump House -- Recessed wiring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sqmm FR PVC insulated single core multi strand copper conductor of ISI mark with 20mm dia non metaalic PVC flexible conduict with 5 AMP, 250 Volt piano type switch ISI mark and ceiling rose ISI mark mounted on M.S. box having front backlight cover of suitable size,63 Amp TPN Main switch,16mm2 armoured cable, M.S. box with 1.5 sqmm. FR PVC insulated single core multi strand copper conductor as earthwire including all accessories and connetion as per the direction Engineer-in-charge.( mark of wire Finolex/ L&T/Anchor /Havells /V.Guard)

Supply, installation, testing and commissioning of variable speed Horizontal submersible pump sets of85 mtr. Head and 1.27 lps discharge capacity with energy efficient motor certified by Bureau of energy efficiency (GOI) of reputed make (star rating) ISI/ISO certified to run in three phase A/C supply, 12 MTR 50MM dia GI Column pipe ,70Mtr 6sqmm x3 core submerssible flat cable,30Mtr 16sqmmx4core aluminium armoured cable, adopter and fitting etc. as required including all cost, taxes, conveyance of all materials,labour etc. complete asPER TS and directed by the Engineer-in-Charge

B)STORAGE RESERVOIR: I) :-Design, Drawing, Construction, Testing & Commissioning of 10000 L capacity Syntex Tank with 6.5 M stagging including cost of all material ,pipes & fitting and valve complete including cost,taxes, royalty and conveyance charges of all materials to worksite with supply of all labour and T&P required for the work complete as directed by the Engineer-in-charge

C)DISTRIBUTION SYSTEM :-Earth work in excavationin foundation in ordinary soil including dressing & levelling the bed within initial load and lift, including supply of all labour and T&P required for the work complete as directed by Engineer-in-charge.

Supplying Pipe & all labour T&P Laying and jointing of the HDPE / PVC pipes & specials of the following outside diameter for all classes including jointing with approved solvent cement by non heat application method complete including earth work excavation in pipe line trenches of required depth in all kinds of soil including levelling the bed and breaking clods to maximum 5 cm to 7 cm and refilling the excavated earth after laying and jointing work over etc all complete as per the direction of Engineer-in-charge including the cost of pipe and fittings with all taxes,cess ,conveyance & duties including testing etc all complete.a) 110 mm Dia HDPE. Pipe PN-6.0(PE-80)

a) 90 mm Dia HDPE. Pipe PN-6.0(PE-80)

Filling in pipe line trench with excavated earth of all kinds of soil including watering & ramming etc. complete as directed by Engineer-in-charge.

Supplying all labour, materials & for cutting concrete road/BT road for taking pipe lines laying & dismantling and removing cement concrete including stacking the useful material for reuse a removing the debris within 50m lead including all labour and T&P required for the work complete as directed by the Engineer-in-charge.

Supplying Pipe & all labour,T&P for laying & jointing of G.I Pipes,fittings and specials of approved make (excluding earth work excavation and refilling) providing lights,barriers,T&P and testing of pipe line etc complete.100 mm dia G.I Pipe(Medium)

Supplying all labour, T&P for fitting and fixing of C.I. Water sluice valve and other valves of approved make with flanged ends including tail pieces with rubber insertions, H.T. Nut and Bolts, washer etc. cleaning and testing with necessary T&P complete as directed by the Engineer-in-Charge including cost,conveyance, taxes of Valves, all fittings and joining materials etc. complete as per the direction of Engineer-in-Chargec) 100mm dia C.I.N.R. Valve

d) 100mm dia C.I. Sluice Valve

e) 80 mm dia C.I. Sluice Valve

g) 15mm dia C.I. Air Valve

Supplying all materials, labour, T&P and constructing brick masonry valve chamber as per approved drawing design and pecification having clear size of chamber 1.00m x 1.00m x 1.20m, wall of 23cm thick F A. Brick masonary of bricks 25cmx12x8cm size having crushing strength between 100Kg/cm2 to 149 Kg/cm2 in C.M. (1:4) earth work in excavation in all kinds of soil, 10cm thick bed concrete (1:3:6) with 4 cm. size h.b.c.b metal projecting by 7.5 cm from the outside of walls, inside plaster 12mm thick in C.M (1:4) with cement punning, 8cm thick RCC cover slab in pieces with C.C. (1:1.5:3) using 12mm size hard black crusher broken granite chips with reinforcement at the rate of 0.80 quintal per cum of R.C.C. including cutting, bending, and tying the grills and refilling with excavated earth etc. complete as per the direction of Engineer-in-Charge.

Supplying all materials, labour, T&P and fittig ,fixing of 1000 lits Capacity PVC tank of approved quality & specification manufactured by reputed Firms with required heavy quality GI pipe of 15mm 10 M ,20mm of 5.0 M & 25mm of 20.00 M minimimum ,with Ferrule cock,Full Way Valve etc for water supply to AWC, UPSchool, GP Office, medical etc with provision of 25 cm thick KB Brick Masonry ( 1:6) Stagging and support wall of inner dia 1.89 M over 0.10 M thick cover slab & 0.25 Mx0.20 M size beam of RCC (1:1.5:3) using 12mm size hard black crusher broken granite chips with centering & shuttering and reinforcement at the rate of 1.00 quintal per cum of R.C.C. including cutting, bending, and tying the grills with 12 mm Cement Plaster(1:4) with punning above wall surface including fitting fixing of best & approved quality of 1 No G.M. Ferrule Cock ,1 No Fullway valve & 2 Nos Brass Bib Cock including all cost,conveyance,taxes of all materials etc. complete as per the direction of Enginer--in charge.

Supplying all materials, labour, T&P and constructing cement concrete single mouth stand post of size 0.25 M x 0.25 M and height of 0.975 M above the Platform with trapizodial top coping as per approved drawing design and specification with cement concrete 1:1.5:3) using 12mm clean hard black crusher broken granite stone chips of approved quality from approved quarry including hosting, covering, laying and compacting concrete and finishing the exposed surface smooth watering and curing having 0.075 M thick cement concrete platform of outer size 1.0 Mx 1.0 M with 0.065 M thick core wall & parapet arround the platform from 0.45 M above ground level filled wth C.C (1:3:6) of height 0.30 M over the base of 0.075 M thick C.C (1:3:6) using 4 cm size hard granite crusher broken metal above 0.30 M height sand filling with 6 mm thick cement plaster ( 1:4 ) to RCC surface including earthwork in excavation in all kinds of soil and rigid and smooth cantering and shuttering for cement concrete works along with M.S. Reinforcement of four numbers of 10 mm tor stee bar from bottom to top with stirrups of 8 mm including cost, royalty and conveyance charges of all materials including fitting fixing of best and approved quality of 1No PVC Shaddle,1 No GM Ferrule Cock & 1 No C.I / PVC / CP.Push/ Bib Cock,minimum 3.00 M of 15 mm & 20 mm dia G.I Pipe of Heavy quality including cost, conveyance, taxes, royality of all materials,jointing materials and water supply fittings etc. complete as directed by the Engineer-in-Charge.