Rural Water Supply And Sanitation Department Tender

iii)160 mm HDPE Pipe

iv)200mm DI Pipe

v)250mm DI Pipe

Supplying all labour T&P materials and refilling the pipe line trench with excavated materials including watering and ramming all complete as per the direction of EIC.

Supplying all labour, T&P for cutting C.C. Road for laying of HDPE Pipe

Supplying all labour, T&P for C.C.(1:2:4) with 12mm size hard granite chips and mending good the damages of C.C. Road for laying of HDPE Pipe line with all complete

Supplying all materials,labour, T & P welding rod gas etc.fabrication and fitting fixing of following sizes, GI pipes making of flanges drilling of bolt holes as per I,S, specification, The minimum thickness of barrel is 6 mm and flanges thickness is 20 mm. The pipes and specials are to be laid to proper gradient level and welding fittings at site etc. complete as per the direction of E.I.C. Culvert Crossing i)80 mm dia G.I pipe

ii)100 mm dia G.I pipe

iii)150 mm dia G.I pipe

iv)200mm dia G.I pipe

Supplying all materials, labour, T&P for Construction of RCC sluice valve chamber and NRV chamber of inside size 0.90m x 0.90m x 1.20m in CC(1:1.5:3) with wall thickness 15cm, 10cm thick base concrete in CC(1:4:8) using 40mm size HG metal, plastering inside wall, out side wall, 30 cm from top and top of wall in CM (1:6) with neat cement punning, providing 7.5cm thick precast R.C.C. cover slab (three piece) in C.C.(1:2:4) using 12 mm size HG chips with MS reinforcement including excavation of chamber in all kinds of soil complete. i)80mm to 200 mm CI SV/NRV

Supplying all labour T&P materials, fitting and fixing of CI sluice valves/ NR valve with double flanged ends for water works purposes for the following rating and nominal diameter` including cost of nut bolt and rubber insertion transportation charges all complete as per specification and direction of EIC, including the cost of DI sluice valves / N.R. valves which will be supplied by the department. i)80mm C.I. sluice valve

ii)100mm C.I. sluice valve

iii)150mm C.I. sluice valve

iv)200mm C.I. sluice valve

v)250mm C.I. sluice valve

Providing House hold connection with supply & fitting fixing of all necessary pipes and fittings from supply main pipe line to water point post such as PVC fabricated Saddle confirming to IS:10299-1982, G.M. ferrule Cock (IS:2692-1978) , GI fittings (15mm dia GI Socket-2, 15mm diaX100mm long GI nipple-2, 20mmx15mm GI R Elbow-1, 20mm dia G.I elbow, Nipple-1, 15 mm dia PVC bibcock(Best Quality), Making of Concrete Block of Size (0.785x0.11x0.11x0.6m3 around 20mm dia GI stand pipe, 110mm dia PVC (Non-Presuure Pipe around Stand point to contain concrete, Cutting holes through existing brick work including making good to same in CM (1:4) for taking GI/PVC pipes & fittingsincluding 20mm HDPE of 0.9 mtr & its laying including Earthwork excavation (1cum) and refilling of excavated material and as per site requirement all complete and as per the direction of Engineer-in-charge. (As per letter No.2770 dated.03.02.2020 of PR. & DW, GoO) i) Providing new connection:

Supplying all materials, labour, T&P for laying, fitting and fixing of 20 mm dia HDPE pipe of PE 80 Grade and pressure rating PN 10.0 for connection of individual house connection confirming to IS 4984& 4985/2016(10kgf/cm2), including earth work excavation (1mX0.3mX0.45m), refilling of the trenches, laying of pipe line, cost of all materials such as pipes and fittings etc. all complete and as per site requirement and as per the direction of Engineer-in-charge. (@ 6 mtr for each house) (As per letter No.2770 dated.03.02.2020 of PR. & DW, GoO)

Supplying all labour and T&P for cutting cement concrete road for taking pipe line and making good to the damages with 12 mm size crusher broken chips concrete CC(1:2:4) including all cost, conveyance, royality of materials including watering, curing and ramming etc. including cost of 20mm HDPE pipe(PE-80, PN-10) & laying of pipe (3.75mtr) confirming to IS 4984& 4985/2016(10kgf/cm2), all complete and as per specification and direction of Engineer-in-charge. (using Cutter) (As per letter No.2770 dated.03.02.2020 of PR. & DW, GoO)

Documentation Charges