Rural Water Supply And Sanitation Department Tender

90 mm dia O.D. HDPE. Pipe (Including pipe cost) PE80, PN-08

110 mm dia O.D. HDPE. Pipe (Including pipe cost) PE80, PN-08

Supplying all labour, T&P for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of Engineer-in-charge.

Supplying all labour and T&P for cutting cement concrete road for taking pipe line etc., complete and as per direction of Engineer-in-charge.

Supplying all materials, labour T&P for making good to the damages of cutting of cement concrete road for taking pipe line with 40 mm size crusher broken metal concrete etc., CC (1:4:8) of thickness 0.10 Mtr and top 12 mm size crusher broken chip;s concrete CC(1:2:4) of thickness 0.075 mtrs including all cost, conveyance, royality of materials including watering, curing and ramming etc., all complete and as per specification and direction of Engineer-in-charge

Supplying all materials, labour and T&P for fixing of following sizes of C.I. SLUICE / NON RETURN VALVES with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete.

100 mm dia S.V.

80 mm dia S.V.

Supplying of all labour,T&P,material including taxes for construction of RCC M-20 valve chambersfor SV/NRV of inside size 0.9x0.9x1.2m & wall thickness 0.15m confirming to approved drawing, design & specification etc. complete as per direction of the Engineer - in Charge.

Supplying all materials, labour and T&P for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (Tata / Zindal make) confirming to IS 1239(P.1)2004/IS:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of Engineer-in-charge to be used to cross drainage work including jointing with rubber insertion, nut and bolts, clamp making and fixing if required and providing necessary masonary support as per site condition and jointing to the water mains and providing scaffoldings.

80 mm dia G.I. ( medium ) pipe

100 mm dia G.I. ( medium ) pipe

80mm dia x 900 G.I Bend D/F of size (0.30 x 0.30)m

100mm dia x 900 G.I Bend D/F of size (0.30 x 0.30)m

80 mm dia G.I Flange

100 mm dia G.I Flange

cutting of G.I Pipe

Welding of G.I Pipe

For new supplys in New Schemes from new Distribution lines Providing House hold connection with supply & fitting fixing of all necessary pipes and fittings from supply main pipe line to water point post such as PVC fabricated Saddle confirming to IS:10299-1982, G.M. ferrule Cock (IS:2692-1978) , GI fittings (15mm dia GI Socket-2, 15mm diaX100mm long GI nipple-2, 20mmx15mm GI R Elbow-1, 20mm dia G.I elbow, Nipple-1, 15 mm dia PVC bibcock(Best Quality), Making of Concrete Block of Size (0.785x0.11x0.11x0.6m3 around 20mm dia GI stand pipe, 110mm dia PVC (Non-Presuure Pipe around Stand point to contain concrete, Cutting holes through existing brick work including making good to same in CM (1:4) for taking GI/PVC pipes & fittingsincluding 20mm HDPE of 0.9 mtr & its laying but excluding Earthwork excavation and refilling of excavated material and as per site requirement all complete and as per the direction of Engineer-in-charge. (As per letter No.2770 dated.03.02.2020 of PR. & DW, GoO)

For supplys in old Schemes from existing old Distribution lines Providing House hold connection with supply & fitting fixing of all necessary pipes and fittings from supply main pipe line to water point post such as PVC fabricated Saddle confirming to IS:10299-1982, G.M. ferrule Cock (IS:2692-1978) , GI fittings (15mm dia GI Socket-2, 15mm diaX100mm long GI nipple-2, 20mmx15mm GI R Elbow-1, 20mm dia G.I elbow, Nipple-1, 15 mm dia PVC bibcock(Best Quality), Making of Concrete Block of Size (0.785x0.11x0.11x0.6m3 around 20mm dia GI stand pipe, 110mm dia PVC (Non-Presuure Pipe around Stand point to contain concrete, Cutting holes through existing brick work including making good to same in CM (1:4) for taking GI/PVC pipes & fittingsincluding 20mm HDPE of 0.9 mtr & its laying including Earthwork excavation (1cum) and refilling of excavated material and as per site requirement all complete and as per the direction of Engineer-in-charge. (As per letter No.2770 dated.03.02.2020 of PR. & DW, GoO)

Service connection Supplying all materials, labour, T&P for laying, fitting and fixing of 20 mm dia HDPE pipe of PE 80 Grade and pressure rating PN 10.0 for Service connection Supplying all materials, labour, T&P for laying, fitting and fixing of 20 mm dia HDPE pipe of PE 80 Grade and pressure rating PN 10.0 for connection of individual house connection confirming to IS 4984& 4985/2016(10kgf/cm2), including earth work excavation (1mX0.3mX0.45m), refilling of the trenches, laying of pipe line, cost of all materials such as pipes and fittings etc. all complete and as per site requirement and as per the direction of Engineer-in-charge. (@ 6 mtr for each house) (As per letter No.2770 dated.03.02.2020 of PR. & DW, GoO)

CC Road Crossing (For the required houses opposite to the main pipe line) Supplying all labour and T&P for cutting cement concrete road for taking pipe line and making good to the damages with 12 mm size crusher broken chips concrete CC(1:2:4) including all cost, conveyance, royality of materials including watering, curing and ramming etc. including cost of 20mm HDPE pipe(PE-80, PN-10) & laying of pipe (3.75mtr) confirming to IS 4984& 4985/2016(10kgf/cm2), all complete and as per specification and direction of Engineer-in-charge. (using Cutter) (As per letter No.2770 dated.03.02.2020 of PR. & DW, GoO)

Documentation charges for photographs at different stage of work.