Rural Development Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Rural Development Department - RDD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date27 Mar 2025
Closing SoonCancelled
Tender Amount₹ 5,63,27,989
Technical
Technical
Additional Eligibility
Class Of Bidder
... View More
A Class
Bid Capacity
... View More
The formula for Assessed Available Bid Capacity is A*N*2-B.
Technical Capacity
... View More
The bidder is required to have prior work experience in projects similar in nature to the work being tendered. Specifically, they must have completed projects with the following values and percentages: * Three similar nature of works costing together not less than 90% of the cost of the project
* Two similar nature of works costing together not less than 80% of the cost of the project
* One similar nature of work costing not less than 70% of the cost of the project Additionally, the bidder must have completed at least 90% of the works in the relevant field. For specific fields, the bidder should have completed works of at least 5% of the contract value, with a minimum value of Rs. 5 lakh, in the following fields: * R&B works
* Irrigation works
* Bridge works
* Building works
Costs
EMD
₹ 5,63,280Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_EICCL_111639_3Tender No
TENDER CALL NOTICE NO.19 OF 2024-25Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing Cement based wall putty wall surface including cost of all materilas including cost of all labour required for the work etc. all complete.
2045.7
89
183315.18
... More
Providing Plastic Emulsion paint two coats over a coat of Primer including cost of all materilas including cost of all labour required for the work etc. all complete.
2045.7
187
384387.03
... More
Supplying assembling fitting and fixing of Roller Blinds to window with locking and sliding arrangements Including cost of all materials ,labour etc complete as directed by the Engineer-in-charge including cost, conveyance and taxes of all materials and cost of all labour, sundries and T&P. etc. required for the work complete. .
42.62
1913
81569.57
... More
Supplying, fitting and fixing of grid mineral fibre ceiling board having size 600mm x 600mm x 16mm of approved design and quality complete with frame and all fitting and fixture
124.99
1604
200483.96
... More
Supplying and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete.
49.22
10668
525108.98
... More
Finishing exterior walls with weather coat of approved shade two coats over a coat of Primer on new work to give an even shade including cost of paint.
295.13
179
53034.86
... More
First Floor
-
-
-
... More
Brick work with Flyash bricks (25 x 12 x 8)cm size having crushing strength not less than 75kg/sqm with dimensional tolerance + 2% in cement mortar (1:6) in Superstructure including watering, curing, cost of carriage, royality and taxes of all materials, cost of all labour , T&P etc all complete.
2.9
5932
17205.03
... More
16mm thick cement plaster (1:6) to inside surface of wall including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge.
11.59
270
3137.64
... More
Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. per 1 sqm (Data for 10 sq.mt.) WALL SURFACE
1.22
1114
1360.13
... More
Providing Cement based wall putty wall surface including cost of all materilas including cost of all labour required for the work etc. all complete.
2045.7
91
187099.72
... More
Providing Plastic Emulsion paint two coats over a coat of Primer including cost of all materilas including cost of all labour required for the work etc. all complete.
2045.7
192
392774.4
... More
Supplying assembling fitting and fixing of Roller Blinds to window with locking and sliding arrangements Including cost of all materials ,labour etc complete as directed by the Engineer-in-charge including cost, conveyance and taxes of all materials and cost of all labour, sundries and T&P. etc. required for the work complete. .
47.63
1913
91158.1
... More
Supplying, fitting and fixing of grid mineral fibre ceiling board having size 600mm x 600mm x 16mm of approved design and quality complete with frame and all fitting and fixture
146.6
1604
235146.4
... More
Supplying and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete.
55.76
10668
594881.69
... More
Finishing exterior walls with weather coat of approved shade two coats over a coat of Primer on new work to give an even shade including cost of paint.
295.13
186
55050.6
... More
Second Floor
-
-
-
... More
Brick work with Flyash bricks (25 x 12 x 8)cm size having crushing strength not less than 75kg/sqm with dimensional tolerance + 2% in cement mortar (1:6) in Superstructure including watering, curing, cost of carriage, royality and taxes of all materials, cost of all labour , T&P etc all complete.
2.9
6357
18436.55
... More
16mm thick cement plaster (1:6) to inside surface of wall including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge.
11.59
277
3219.24
... More
Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. per 1 sqm (Data for 10 sq.mt.) WALL SURFACE
1.22
1135
1385.52
... More
Providing Cement based wall putty wall surface including cost of all materilas including cost of all labour required for the work etc. all complete.
1989.73
93
185781.09
... More
Providing Plastic Emulsion paint two coats over a coat of Primer including cost of all materilas including cost of all labour required for the work etc. all complete.
1989.73
196
390444.72
... More
Supplying assembling fitting and fixing of Roller Blinds to window with locking and sliding arrangements Including cost of all materials ,labour etc complete as directed by the Engineer-in-charge including cost, conveyance and taxes of all materials and cost of all labour, sundries and T&P. etc. required for the work complete. .
29.34
1913
56153.24
... More
Supplying, fitting and fixing of grid mineral fibre ceiling board having size 600mm x 600mm x 16mm of approved design and quality complete with frame and all fitting and fixture
92.33
1604
148097.32
... More
Supplying and fitting of Double skin Wall panelling made of aluminium anodised section framing conforming to standard aluminium section as horizontal and vertical members with atleast 600mm c/c and fixing of 9mm thick BWR ply with 4mm thick veneer pasting finished with melamine polishing complete.
36.66
2646
97018.49
... More
Supplying and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete.
34.65
10668
369667.34
... More
Supplying, fitting and fixing of M.S. Frame for Roof Truss of approved quality with provision of new M.S. Angle and flat as per requirement and fixing in proper position in C/C with to and pro transportation charge to febrication unit including cost of all materials and cost of all labour etc all complete.
10024.35
96
964041.74
... More
Supplying, Fitting & Fixing of profile colour Sheet including cost of fittings etc. including cost, conveyance of all materials and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge .
286.41
864
247604.31
... More
Painting two coats with approved enamel paints of approved colour, shade over a coat of primer over new Iron work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.
421.02
260
109743.07
... More
Finishing exterior walls with weather coat of approved shade two coats over a coat of Primer on new work to give an even shade including cost of paint.
308.45
193
59749.85
... More
Third Floor
-
-
-
... More
Brick work with Flyash bricks (25 x 12 x 8)cm size having crushing strength not less than 75kg/sqm with dimensional tolerance + 2% in cement mortar (1:6) in Superstructure including watering, curing, cost of carriage, royality and taxes of all materials, cost of all labour , T&P etc all complete.
2.9
6888
19976.01
... More
16mm thick cement plaster (1:6) to inside surface of wall including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge.
11.59
285
3303.15
... More
Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. per 1 sqm (Data for 10 sq.mt.) WALL SURFACE
1.22
1157
1412.16
... More
Providing Cement based wall putty wall surface including cost of all materilas including cost of all labour required for the work etc. all complete.
1549.04
95
147669.98
... More
Providing Plastic Emulsion paint two coats over a coat of Primer including cost of all materilas including cost of all labour required for the work etc. all complete.
1549.04
200
310706.44
... More
Supplying assembling fitting and fixing of Roller Blinds to window with locking and sliding arrangements Including cost of all materials ,labour etc complete as directed by the Engineer-in-charge including cost, conveyance and taxes of all materials and cost of all labour, sundries and T&P. etc. required for the work complete. .
29.34
1913
56153.24
... More
Supplying, fitting and fixing of grid mineral fibre ceiling board having size 600mm x 600mm x 16mm of approved design and quality complete with frame and all fitting and fixture
92.33
1604
148097.32
... More
Supplying and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete.
28.98
10668
309176.32
... More
Finishing exterior walls with weather coat of approved shade two coats over a coat of Primer on new work to give an even shade including cost of paint.
308.45
201
62072.48
... More
Fourth Floor
-
-
-
... More
Brick work with Flyash bricks (25 x 12 x 8)cm size having crushing strength not less than 75kg/sqm with dimensional tolerance + 2% in cement mortar (1:6) in Superstructure including watering, curing, cost of carriage, royality and taxes of all materials, cost of all labour , T&P etc all complete.
2.9
7449
21604.71
... More
16mm thick cement plaster (1:6) to inside surface of wall including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge.
11.59
292
3389.61
... More
Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. per 1 sqm (Data for 10 sq.mt.) WALL SURFACE
1.22
1180
1440.16
... More
Providing Cement based wall putty wall surface including cost of all materilas including cost of all labour required for the work etc. all complete.
1220.72
97
118849.3
... More
Providing Plastic Emulsion paint two coats over a coat of Primer including cost of all materilas including cost of all labour required for the work etc. all complete.
1220.72
205
250320.84
... More
Supplying assembling fitting and fixing of Roller Blinds to window with locking and sliding arrangements Including cost of all materials ,labour etc complete as directed by the Engineer-in-charge including cost, conveyance and taxes of all materials and cost of all labour, sundries and T&P. etc. required for the work complete. .
19.97
1913
38220.18
... More
Supplying, fitting and fixing of grid mineral fibre ceiling board having size 600mm x 600mm x 16mm of approved design and quality complete with frame and all fitting and fixture
32.96
1604
52867.84
... More
Supplying and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete.
21.11
10668
225214.36
... More
Finishing exterior walls with weather coat of approved shade two coats over a coat of Primer on new work to give an even shade including cost of paint.
173.59
201
34933.25
... More
ELEVATION WORK
-
-
-
... More
Providing and painting with Asian make concrete Texture paint of on the plastered surface of outer wall including scaffolding complete as per approved specification and direction of the Engineer-in-charge with cost of all materials. labour, T&P and Hire and running charges of machineries etc. all complete.
618.13
408
252197.04
... More
Providing and fixing of 12mm thick cleartoughened glass framelessdoor with dorma premium fittings ,dorma premium(9111198)unilite package bts 75,ul pt 10 with cover UL PT 20 with cover UL us 10 Luckwith cover and pt 24 dorma premium (9137121) h type handle 450mm ,12mm clear toughened glass with cutout and hole, including the cost of all materials, hardware fittings, cost of all labour, conveyance,loading,t&p, etc,completeas per the direction of engineer in charge.
8.74
11343
99139.57
... More
Plinth protection
-
-
-
... More
Earth work in excavation of foundation in all kind of soil or gravelly soil including dressing and levelling the bed and disposal of the excavated materials within initial leads and lifts as per direction of the Engineer-in-charge.
45.68
297
13566.96
... More
Filling in foundation and plinth with sand well watered and rammed with cost, conveyance, royality, taxes of all materials and all labour, T&P, etc. complete
20.48
509
10435.79
... More
Providing cement concrete (1:3:6) using 40mm size H.G. Crusher Broken metal of approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royality, cost of all labour, T&P etc. complete as per direction of E.I.C.
14.04
6045
84873.34
... More
Providing cement concrete (1:1.5:3)in all floors at all height using 12mm size black hard granite Crusher Broken chips of approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royality, cost of all labour, T&P etc. complete as per direction of E.I.C.
21
8274
173760.93
... More
Construction of Gate with Security Room:
-
-
-
... More
Earth work in excavation of foundation in all kind of soil or gravelly soil including dressing and levelling the bed and disposal of the excavated materials within initial leads and lifts as per direction of the Engineer-in-charge.
64.8
297
19245.6
... More
Filling in foundation and plinth with sand well watered and rammed with cost, conveyance, royality, taxes of all materials and all labour, T&P, etc. complete
12.61
509
6425.55
... More
Providing cement concrete (1:3:6) using 40mm size H.G. Crusher Broken metal of approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royality, cost of all labour, T&P etc. complete as per direction of E.I.C.
6.84
6045
41348.55
... More
R.C.C. M-25 grade with 20mm and down grade C.B. Chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering curing and cost of all materials and labour, T&P centering, shuttering etc. complete but excluding cost of reinforcement complete.
-
-
-
... More
Column Footing
21.6
6882
148654.66
... More
Column
8.76
18373
160952.82
... More
Plinth Beam
3.29
7747
25489.7
... More
Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position incluing cost of binding wire 18 to 20 gauge and cost and carriage of steel etc. complete.
65.55
9088
595730.2
... More
Brick work with Flyash bricks (25 x 12 x 8)cm size having crushing strength not less than 75kg/sqm with dimensional tolerance + 2% in cement mortar (1:6) in Superstructure including watering, curing, cost of carriage, royality and taxes of all materials, cost of all labour , T&P etc all complete.
23.48
5563
130630.98
... More
12mm thick cement plaster (1:6) to outside surface of wall including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge.
204.33
182
37255.49
... More
6mm thick cement plaster (1:4) to R.C.C. Surface finished smooth including closed deep chipping and slurry treatment, watering, curing cost, carriage, royality and taxes of all materials etc.complete as directed by the Engineer in Charge.
157.22
173
27233.65
... More
Providing and painting with Asian make concrete Texture paint of on the plastered surface of outer wall including scaffolding complete as per approved specification and direction of the Engineer-in-charge with cost of all materials. labour, T&P and Hire and running charges of machineries etc. all complete.
361.55
408
147512.4
... More
Supplying, fitting and fixing of Granite tile (20mm thick) on flooring over 25mm CM (1:1) including cost of all materials and cost of all labour required for the work etc. all complete.
141.7
2892
409874.34
... More
Supplying, fitting and fixing of Vitrified tile in floors of size 600mm x 600mm of confirming to I.S. 13755 with application of polymere modified set cement based water resistant adhesive confirming to I.S. 15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials, taxes, labour & T&P etc. required for the work etc. all complete.
11.31
1182
13378.26
... More
Supplying, fitting and fixing of U-PVC windows with glass (without mesh) including all fittings with cost of all materials, labour, T&P etc. all complete required for the work etc. all complete.
5.92
4960
29368.94
... More
Supplying, fitting and fixing of M.S. Grill of approved quality with provision of new M.S. Angle and flat as per requirement and fixing in proper position in C/C with to and pro transportation charge to febrication unit including cost of all materials and cost of all labour etc all complete.
3853.8
97
375205.97
... More
Compound Wall
-
-
-
... More
Removing old lime or cement plaster from walls including raking out joints 12 mm deep & removing the debris with in 50. m Lead. (per 1 Sqm.) (Data for 9.3 sqm.)
534
56
30016.14
... More
12mm thick cement plaster (1:6) to surface of wall including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge.
1068
182
194728.44
... More
Painting two coats to walls with weather coat over a coat of Primer paint of approved shade and quality in all floors and all heights including preparing the surface, watering and curing with cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T&P. etc. required for the work etc. complete as directed by the Engineer in charge.
1068
179
191919.6
... More
Land Scapping
-
-
-
... More
Earth work in excavation of foundation in all kind of soil or gravelly soil including dressing and levelling the bed and disposal of the excavated materials within initial leads and lifts as per direction of the Engineer-in-charge.
144.24
297
42839.28
... More
Filling in foundation and plinth with sand well watered and rammed with cost, conveyance, royality, taxes of all materials and all labour, T&P, etc. complete
72.12
509
36770.38
... More
Carriage & filling with earth by mechanical mean to the ground and levelling properly cost, conveyance, royality, taxes of all materials and all labour, T&P, etc. complete
72.26
278
20143.2
... More
Providing cement concrete (1:3:6) using 40mm size H.G. Crusher Broken metal of approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royality, cost of all labour, T&P etc. complete as per direction of E.I.C.
238.12
6082
1448333.94
... More
Construction of granular sub-base by providing Close graded Granular subbase Grading-II material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
238.12
2064
491527.3
... More
Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make,design,colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018.
384.28
608
233795.95
... More
Roof insulation
-
-
-
... More
Supply and installation of Rockwool having density of 48Kg/m3, with thickness of 48mm, aluminium foil backing to be installed with the help of GI Wire just beneth the Roofing sheet as per direction of engineer in charge. (Approve make : Sunrock / Inner Engineering / Roxcul Rockwool)
297
2238
664715.7
... More
False Ceiling
-
-
-
... More
Providing & fixing Gypsum Board False ceiling with Main ceiling sections at 1200 c/c & Cross members at 450 c/c. The grid work to be suspended from ceiling with Hangers at every 1200 c/c both directions. The Frame work to be as per manufacturer's specifications. False ceiling is finished with 12.5 mm thick. gypsum board for to be screwed to the frame. The board is finished with filling the tapered edges of the board with jointing compound and finishing with PAPER tape of INDIA GYPSUM with Tray for cove lighting. The ceiling is finished with a top coat as per approved manufacturer.Item includes Cove and curve designs. all complete as per drawings, specification and direction of the Engineer in Charge . (Approve make : Saint Gobain/ USG Knauf/ Absound Overseas)
177
2047
362428.74
... More
Stage False Ceiling
-
-
-
... More
Supply & fixing suspended ceiling which includes G. I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall / partition with the help of nylon sleeves and screws, at 600mm centres. Then suspending G. I. intermediate channels of size of size 45mm (0.9mm thick with two flanges of 15mm each) from the truss / RCC roof at 1220mm centres with M.S. hanger as per requirement with G.I cleat etc. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 600mm centres. Providing and Fixing 15 mm thick tiles made of Wood Fibre cement composites with black colours of size 595x595mm/595X1195mm. highly recommend for ceiling. Has excellent noise absorption of 1 NRC. (Approve make : NISHABD / Absound Overseas / UNIDUS )
55
3107
170885
... More
Laminate finish False Ceiling
-
-
-
... More
Providing and fixing of designer Laminate finish ceiling with 12mm thick BWP IS:710 ply of approved make fixed on G.I framework with glasswool insulation of desired thickness finished with 1mm thick approved laminate as per design & detail. The cost includes all materials, labour, conveyance, scaffolding, T&P etc complete in all respect as per direction of EIC. (Approve make : Green / Kitply / Century/ LPH PLY)
28
6476
181333.32
... More
Fabric finish False Ceiling
-
-
-
... More
Supply and installation, Teasting & Commissioning of synth slim grafix panel thickness -9mm of required side for the wall shall have slim grafix panels of customized size. Technical parameters core- poly fibre, Density - 220kg/m3,weight-2kg/m2,Fire class-A, NRC-0.4, climate-0 C,RH-50, Green VOC-NIL,RH%-60, to be fixed by synthetic adhesive stick -7. the cost includes al materials,labour, conveyance, scaffolding, T&P etc complete in all respect as per direction of EIC.
46
7276
334725.44
... More
Acoustical Wall Panelling
-
-
-
... More
Supply and installation of Fabric Tracks Stretch wall fabric system by using FR Grade acoustic fabric of size 1700mm width, shall be stretched by using wooden base 12.5 mm thick, rigid vinyl Stretch Tracks half wrap/full wrap 12.5mm and Midseam 12.5mm, Strand wood wool board , Infills polyester fibre infill with requisite accessories & tools. Wooden base 12mm is first installed on the wood fibre along the marking lines with metal fasteners inserted at 300mm centres. 12.5 mm tracks to be installed on wooden base, after applying Stick adhesive on both surfaces for a true and continuous secure grip, and heavy-duty fasteners at 150mm centers on one/both sides of Stretch Tracks. The GI strut system includes GI Cross channel having thickness 0.45mm, length 3600mm, knur led web 40mm, depth 25mm and equal flanges 15mm is fastened vertically/horizontally at every 600mm centres. Strand Wood Wool Board is square edge magnesite bonded pinewood fibre panels of size 600x1200x15mm having density 400kg/m3, weight 4kg which is fixed to Cross Channel 25mm. Long edge of panels should be perpendicular to length of Cross Channel , Infills polyester fibre infill 1000gsm 25mm thick adhered on Strand Wood Wool Board panel by using adhesive. Fabric of width 1700mm is then aligned to the Stretch tracks by following the fabric thread line or pattern. The fabric is stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module wall fabric width would be 1600mm. Technical Parameters: • Core – Pine wood fibre & Poly fibre • Fire – Class A • Acoustics – NRC 0.90 • Climate (OC RH) – 55, 90 • Termite resistance – Yes • Light reflectance – Colour dependent • Green (RC %) – Low, 10 inatallation as per direction of EIC. (Approve make : NISHABD / Absound Overseas / UNIDUS )
188
4275
803700
... More
Wooden Slats for Wall Panelling
-
-
-
... More
Wall Supply & installation of Slats made of pinewood E1 grade fiberboard, Melamine laminated finish, groove perforated slats L16-3/L23-3/L32-3/Customized - (3mm grooves Slats @16mm centres) back lined with black acoustical fleece, tongue-groove edge for a seamless look, of size 192 & 128x2440x15/17mm thick having base density 700Kg – 800 Kg/m3, weight 12Kgs/m2 installed by using GI strut system. The GI strut system includes GI Cross channel having thickness 0.45mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened vertically/horizontally at every 600mm centres. Aluminium core cross channel (CC18) having thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & centre brackets is then fixed perpendicular to the CC25with the help of fasteners at every 400mm centres. Slats of size 192 & 128x 2430x15/17mm in then fixed perpendicular to CC18 with suitable edge & centre brackets. Contractor to provide expansion joints of 3mm at every 5mtrs both ways. Panels shall be back lined with acoustical infill of 1000gsm x 50mm thick adhered to the wall using Stick adhesive Technical Parameters: • Core Variants – Wood Core E1 Fibreboard • Fire – Class A • Acoustics – NRC up to 0.75 • Climate (OC RH) – 50, 70 • Green (RC %) – 25 • Strength, Load capacity (Kg) - Ball-Impact inatallation as per direction of EIC. (Approve make : NISHABD / Absound Overseas / UNIDUS )
28
7838
219466.8
... More
Veneer finish Wall Panelling
-
-
-
... More
Providing and fixing of designer veneer wall panelling with 12mm thick BWP IS:710 ply of approved make fixed on G.I framework of desired thickness finished with 4mm thick approved veneer with melamine polish as per design & detail. The cost includes all materials, labour, conveyance, T&P etc complete in all respect as per direction of EIC.
103
6996
720649.8
... More
Laminate Finish Wooden Panelling .
-
-
-
... More
Providing, fitting and fixing full height wooden paneling to walls and columns where ever necessary from floor lvl to ceiling ht or as per drawing/design made out of 50.8mmx25.4mmx1.34mm thick Aluminium rectangular sections placed @ 600mm c/c both ways on grid, on top of grid 12mm fire resistant and termite proof ply (conforming to IS code :5509) to be provided with 1mm thk laminate of approved shade and colour finished as per design/drawing or as directed by the Architect/Engineer-in- Charge. The rate includes cost of cutouts for electrical switches, light fixtures, wall bracket fans if any, all complete with materials, labour, T&P, taxes etc. (Approve make : Green / Kitply / Century/ LPH PLY)
48
6476
310857.12
... More
Carpet
-
-
-
... More
Supplying and Fixing of broadloom carpet of 100% Nylon Cut Pile , Chromojet Printed , Height 7 mm (± 1 mm),Total Height 11 mm (± 1 mm),Stitch / 10 cm 37-39 (± 2% ), Pile Weight Net less Than 800 GSM (± 5% ), Total Weight 1791 GSM (± 5% ), Secondry Backing PP Mesh, Gauge 1/8 Cut Pile, Latex Natural Rubber, Color fastness to LightTest Method: AATCC 16 (20 AFU) ≥ 4.0 at 80 Hours , Static Electricity Test Method: AATCC 134 Less than 3.5 KV, Hexapod test Method: ASTM D 5252 ≥ 4, Flammability (Radiant Panel) Test Method: ASTM E 648 ≥ 0.45 (Class I) , complete as per drawing , specifications of the architect. The carpet and Underlay (min 6 mm) will be installed with standard Fevicol/Dunlop Adhesives.The flooring to be installed as per the manufacture's specification and to be installed by its authorized agency or as Approved . (Approve make : Rosetta / Radiant/ Quadrotte)
217
4000
868000
... More
Acoustic Door with Panicbar
-
-
-
... More
Acoustic Door with all hardware and fitting :- Sound Proof Acoustical Door would be created with minimum thickness of 70mm, Insulated with acoustical materials, fabric from inside as per interiors design, With necessary door fittings and Rubber seal. (Door Handle, Lock & Door Closure as per client’s choice) (Approve make : NISHABD / Absound Overseas / UNIDUS )
3
71428
214285.71
... More
Supply & fixing of Entry/exit gate signage as per direction of Engineer in Charge.
2
4285
8571.42
... More
Wooden Flooring
-
-
-
... More
Supply and Installation of GRADE -2 Maple/Teak Wooden Flooring system (BWF Certified) EN Tested of Hardwood Maple Size: 20mm thick X 57/83mm Width Tongue & Groove system over 45mm treated pinewood slepper installed aat 9"|(23 CM) distance with 19mm thick Rubber Pads sanded ,kiln and dried treated with vapour barrier of 6 mil polythene laid on VDF Flooring,including cast of all materials,cast of all labour,conveyance,loading,unloading,T &P,etc. Completeas per drawing and the direction of engineer -in - charge.(VDF Flooring Paid Separately)
55
7736
425485.5
... More
Providing and fixing of wooden skirting by using the plank of size 16mm x 60mm x 2000RL with the help of headless nail all all complete including all accessories (Skirting, Profile) etc. all complete including cost, Conveyance, royalty, taxes of all materials, labour T&P etc, complete as per direction of Engineer- in-charge.The cost includes all materials, labour, conveyance, scaffolding, T&P etc complete in all respect as per direction of EIC. (Approve make : Action Tesa / Mikasa Floors / Greenlam)
34
685
23314.14
... More
Raised flooring
-
-
-
... More
Providing & fixing Sub-Frame ( Frame Work ) with leveled 19mm BWP marine grade ply (century/green IS:710 grade) on existing floor so as to look flush including cost, conveyances, loading unloading, royalties, taxes of all materials, cost of all labour, T&P, sundries, scaffolding required for the work etc, complete as per specification & direction of the Engineer-in-charge
272
2809
764189.44
... More
Supply Fitting & Fixing of 50 x 50 x 3.6 mm M.S Tubular Section for under structure of raised flooring including Transportation and all etc as per the instruction of EIC.
10974
90
997646.34
... More
Auditorium Chair
-
-
-
... More
Push back chair or Fixed Back chair Auto Tip-up cushion Sliding mechanism – Proprietary item as per CVG design. Design is subject to change for continual improvement.Arm-rest to Arm-rest (center dist.): 21’’to 24’’ (inches) PPCP-injection molded Housing for Cushion & Backrest. All sheet metal parts with powder coated / or zinc passivated .Seat numbering on cushion on tip-up portion as per CVG design.Row numbering for seats along the aisles Provision for lights on sides for seats along the aisles. Integral Skin Armrest/PPCP /Wooden.Approved from our existing range of fabric. 3mm lamination on fabric FR grade material confirms to IS 15061 For horizontal Burning test only Frame of ERW Round Tube / IS :3074 - 2005 Cushion Frame - 19 dia 1.2mm thick, Back Rest - 16 dia 1.63 mm thick, S Spring Wire Dia – 2.9 Remark – dimension tolerance +2 mm Density: 45 + 5 Kg/M3 / JIS K 6401 Constant Compression Set: (Max. 13%) JIS K 6401. (Approve make : Geeken / CVG / Featherlite)
144
11619
1673143.2
... More
ELECTRICAL WORKS
-
-
-
... More
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. GROUP-A
21
612
12852
... More
Group-B L.P- F.P- C.B.P-
79
908
71732
... More
Group-C L.P- F.P- C.B.P-
47
1278
60066
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type) with suitable size modular box & coverincluding supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius ) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
77
547
42119
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
30
196
5880
... More
Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch & socket(modular type) ( flame retradant type) with suitable size modular box & metallic cover plate (both side) falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius/Panasonic (vision) (For equipement power)(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
39
1287
50193
... More
HVAC
425
157
66725
... More
Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)
820
171
140220
... More
Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)
1000
188
188000
... More
Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5)
25
220
5500
... More
Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)
180
444
79920
... More
Supplying and installation of 25A AC starter Modular type, Schneider/Siemens/Legrand coil voltage-230 Volt A.C. on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
36
626
22536
... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
40
75
3000
... More
S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision)
5
374
1870
... More
Supplying,fixing of 1x16A Plug TOP for the existing switch board with complete fitting by 01 no of 16A plug top (modular type including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
57
89
5073
... More
Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side) (modular type including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
-
-
-
... More
2 Modulee
36
145
5220
... More
FITTING & FIXTURE
-
-
-
... More
Supplying and fixing of Energy efficient Recess /Surface mounted square/round shaped LED luminaire made up of CRCA powder coated sheet steel of 36W (595X595X70MM)and system lumens output not less than 4680 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 5 years.
87
4721
410727
... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .(With fan Regulator)
5
3724
18620
... More
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years .
23
728
16744
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
5
33
165
... More
SITC of Sleek LED 9 watt LED Lamp complete with all accessories etc. directly on angle holder as required.
panasonic/havells/LT/Bajaj/Phillips/Crompton/Wipro
40
110
4400
... More
SITC of Wall mounted fan 16" size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton/ Polycab .
5
2839
14195
... More
SITC of 15 Ltrs capicity Geyser. (Make-Havells/V-guard/Bajaj/Crompton).
5
11500
57500
... More
BDB, & MCB
-
-
-
... More
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
-
-
-
... More
4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years
9
4270
38430
... More
12Way SPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase,neutral, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years
1
2184
2184
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
116
321
37236
... More
Supplying and fixing 63Amps rating,C series,10KA breaking capacity, DP 240 volts, MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
1
1122
1122
... More
Supplying and fixing 63Amps rating,C series,10KA breaking capacity, 4P 415 volts MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The MCB should be Replacement Warranty will be 3 years.
9
2966
26694
... More
EARTHING
-
-
-
... More
Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.
6
6500
39000
... More
Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
100
150
15000
... More
Supply and fixing of copper bus bar with suitable sheet metal enclosure on MS angle frame with proper grouting on wall including all connections.
-
-
-
... More
100Amp TPN bus bar-300 X 32 X 3mm size
1
3494
3494
... More
CABLING & END TERMINATION
-
-
-
... More
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/Polycab/HAVELLS/RR KABLE/KEI/Gloster of following size cables as per direction of Engg.-in-Charge.
-
-
-
... More
4core x 16 sq mm
100
305
30500
... More
4core x 25 sq mm
35
375
13125
... More
3.5core x 35 sq mm
30
425
12750
... More
3.5core x 50 sq mm
30
573
17190
... More
3.5 core x 95 sq mm
45
971
43695
... More
3.5core x 150 sq mm
250
1402
350500
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
80
155
12400
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
80
176
14080
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 120 SQ. MM but not exceeding 400 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
200
197
39400
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
22
56
1232
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
27
77
2079
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge.
35
45
1575
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
20
61
1220
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
16
103
1648
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
10
158
1580
... More
Supplying and making end termination with brass double compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
-
-
-
... More
3 1/2 x 35sqmm
2
400
800
... More
3 1/2 X 95sqmm
4
472
1888
... More
3 1/2 X 150sqmm
8
592
4736
... More
4 X 16sqmm
2
230
460
... More
4 X 25sqmm
2
278
556
... More
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
-
-
-
... More
50 mm dia
32
161
5152
... More
PANELS
-
-
-
... More
MAIN PANEL
-
-
-
... More
S/I/T&Commissioning of CPRI tested LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint fallowed by 9 tank acid treatment is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.80X10MM Separate Aluminium Earth bus bar should be installed.
1
465489
465489
... More
In commer-1-01 number of 630A 4P Icu=100%Ics,36Ka LSIG MCCB with micro processor based release Electrical locking for normal ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS(FROM TRANSFORMER)
-
-
-
... More
In commer-2-01 number of 320A 4P Icu=100%Ics,36Ka LSIG MCCB with micro processor based release DG ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS(FROM Dg)
-
-
-
... More
In commer-2- 01 no of 320A 4P onload changeover switch (160 KVA DG 01 NO)(Make-C&S/LK(L&T)/Siemens/Schneider)
-
-
-
... More
Busbar-1&2 04 numbers of 700Amps copper busbar with 1.6A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing)
-
-
-
... More
Out going- 02 numbers of 250A 4P MCCB,,25Ka MCCB withTMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS
-
-
-
... More
Out going- 12 numbers of 63-100A 4P MCCB,,16Ka MCCB withTMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS)
-
-
-
... More
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
-
-
-
... More
(ii) 01 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication with RS 485 COMPACTIVITY FOR bms data.
-
-
-
... More
1 no. 3P+N 65kA type 1+2 SPD with 63A rating,10KA breaking capacity ,4P MCB(TYPE-I+II)(Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9)
-
-
-
... More
AUDITORIUM PANEL
-
-
-
... More
S/I/T&Commissioning of CPRI tested LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint fallowed by 9 tank acid treatment is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.40X10MM Separate Aluminium Earth bus bar should be installed.
1
138427
138427
... More
In commer-1-01 number of 250A 4P Icu=100%Ics,25Ka LSIG MCCB with micro processor based release Electrical locking for normal & DG ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS(FROM TRANSFORMER)
-
-
-
... More
Busbar-1&2 04 numbers of 300Amps copper busbar with 1.6A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing)
-
-
-
... More
Out going- 01 numbers of 100A 4P MCCB,,16Ka MCCB withTMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS
-
-
-
... More
Out going- 6 numbers of 63A rating,10 KA breaking capacity,C series, 4P MCB (Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9)
-
-
-
... More
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
-
-
-
... More
(ii) 01 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication with RS 485 COMPACTIVITY FOR bms data.
-
-
-
... More
1 no. 3P+N 40kA type 2 SPD with 63A rating,10KA breaking capacity ,4P MCB(Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9)
-
-
-
... More
1F-3F AC PANEL
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING LIGHT)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD 3P+N 40kA shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed.
4
39167
156669.12
... More
In commer- 01 no 100A 4P MCCB 16kA, MCCB withTMR based release with adjustable overloadwith on/off trip indication Light load for each floor. ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS)
-
-
-
... More
Busbar- 04 numbers of 200Amps 25*5mm copper bus bar Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator.
-
-
-
... More
Out going- 05 nos 63A 4P MCB 10kA,C series Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9
-
-
-
... More
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
-
-
-
... More
(ii) 01 set of MFM with CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model)
-
-
-
... More
VRF AC ODU PANEL
-
-
-
... More
S/I/T&Commissioning of LT indoor /Out door floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD 3P+N 40kA shall be installed in the incomer. 40X10MM Separate Aluminium Earth bus bar should be installed.
1
138427
138427
... More
In commer- 01 no 250A 4P MCCB 25kA, MCCB, Icu=100% Ics withTMR based release with adjustable overloadwith on/off trip indication Light load for each floor. ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS)
-
-
-
... More
Busbar- 04 numbers of 200Amps 25*5mm copper bus bar Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator.
-
-
-
... More
Out going- 07 nos 63A 4P RCBO,100 mA to ODUs and AHus . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9
-
-
-
... More
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
-
-
-
... More
(ii) 01 set of MFM with CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model)
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (Main UPS Panel)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD 3P+N 40kA shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed.
1
53900
53900
... More
In commer- 01 no 63A 4P MCCB 16kA, MCCB withTMR based release with adjustable overloadwith on/off trip indication Light load for each floor. ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS)
-
-
-
... More
Busbar- 04 numbers of 200Amps 25*5mm copper bus bar Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator.
-
-
-
... More
Out going- 05 nos 32A 4P MCB 10kA,C series Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9
-
-
-
... More
Out going- 05 nos 63A DP MCB 10kA,C series Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9
-
-
-
... More
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
-
-
-
... More
(ii) 01 set of MFM with CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model)
-
-
-
... More
SPLIT AC
-
-
-
... More
1.5 TR high wall 5 star inverter type split A.C machine (BTU/Hr-18000)with copper condensor & evaporator having ambient temperature 52 degree celcius with comprehensive 1 year warranty,5 years warranty on PCB, 5 years warranty on compressor (Make:O-General/Diakin/Mitsubishi/Hitachi)
16
59702
955232
... More
2.0 TR high wall 5 star inverter type split A.C machine (BTU/Hr-21000-24000) with copper condensor & evaporator having ambient temperature 52 degree celcius with comprehensive 1 year warranty,5 years warranty on PCB, 5 years warranty on compressor (Make:O-General/Diakin/Mitsubishi/Hitachi)
24
67787
1626888
... More
REFRIGRANT PIPING
-
-
-
... More
Supply,installation of hard/soft copper refregrant piping of size 5/8 inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm FRLS Copper control cable alongwith 25 mm weather proof closed cell nitrile insulation ,complete with fitting of bends and other nesessary material to complete the job.
-
-
-
... More
1 TR to 3 TR high wall split A.C
260
838
217880
... More
Supply,installation & fabrication of MS base frame for both indoor and outdoor unit and other nesessary material to complete the job.
-
-
-
... More
1 TR to 3 TR high wall split A.C
40
1800
72000
... More
DRAIN PIPING
-
-
-
... More
Supply,installation & fabrication of Insulated drain water piping from indoor to nearestdrain point separate to all and other nesessary material to complete the job.
-
-
-
... More
25mm nom. Dia pipe
260
152
39520
... More
CONTROL CABLE
-
-
-
... More
Supply,laying of control cable and other nesessary material to complete the job.
-
-
-
... More
For 1 TR to3 TR high wall split A.C
157
123
19311
... More
Supply and fixing of 4kVA Voltage stabilizer (Make-V-Guard/Microtek
16
7952
127232
... More
Supply and fixing of 5kVA Voltage stabilizer (Make-V-Guard/Microtek
24
8970
215280
... More
SITC of 30KVA UPS system with IGBT based inverter system, true online double conversion system, inbuilt isolation transformer & automatic phase sequence corrector of 3ph in put to 3 ph output,415V, with built in BMS with battery back up up to 30 minutes with MS Rack for battery Housing, DC cable 7 Mtr with SFU and links for installation (Battery required: 12V, 65AH, 40 Nos) protection for fault by OL,UV,EF,GF,OC,Ph. Make: APC/ Vertiv/Numeric
1
802000
802000
... More
TRAY
-
-
-
... More
Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 200mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
157
605
94985
... More
Audio (Auditorium)
-
-
-
... More
Left & Right FOH: Supply, installation, testing and commissioning of Frequency Response 50Hz to 20kHz Power Rating 800W AES, 2400W peak Sensitivity 100dB @ 1W/1m Maximum SPL 127dB continuous, 133dB peak @ 1m Nominal Impedance 4Ω, Low Frequency Driver 2 x 12″ (250 mm) weather resistant long throw woofer High Frequency Driver 1.75″ (44 mm) voice coil compression driver Crossover 1.2kHz Passive, low loss air core inductors and MKP capacitors Dispersion 90° horizontal x 40° vertical, Finish Black impact resistant structured coating. Approved Make: PULZ/ BOSE/ MEYER SOUND
2
195618
391236
... More
Supply, installation, testing & Commissioning of OEM Suspension Bracket for FOH Loudspeakers. Approved Make: PULZ/ BOSE/ MEYER SOUND
2
17012
34024
... More
Subwoofer: Supply, installation, testing & Commissioning of a Frequency Response 30Hz to 200Hz Power Rating 1500W AES, 6000W peak Sensitivity 98dB @ 1W/1m Maximum SPL 129.5dB continuous, 135.5dB peak Nominal Impedance 8Ω Transducers 1 x 18” (455 mm) long throw weather resistant woofer Finish Black impact resistant structured coating Connector 2 x Neutrik NL4MP Speakon connectors Enclosure 16 mm Birch plywood aerodynamically vented enclosure Grill Acoustically transparent perforated steel with foam backing Recommended Filter 30Hz 18dB/octave Butterworth High pass filter 80 – 120Hz 24dB Linkwitz Riley Low pass filter. Approved Make: PULZ/ BOSE/ MEYER SOUND
2
209084
418168
... More
Front Fills & Delay Fills: Supply, installation, testing & Commissioning of 2-way speaker with Frequency Response 70Hz to 20kHz, Power Rating 150W AES, 600W peak, Sensitivity 95 dB @ 1W/1m, Maximum SPL 116dB continuous, 120dB peak @ 1m, Nominal Impedance 8Ω, Dispersion 90° conical, 10″ (250 mm) Low-Mid driver with coaxial entry, 1″ (25 mm) voice coil compression driver mounted coaxially, with mouting bracket. Approved Make: PULZ/ BOSE/ MEYER SOUND
4
46750
187000
... More
Stage Monitor: Supply, Installation, Testing, & Commissioning of the passive 2-way speaker with Bracket Frequency Response 55Hz to 20kHz Power Rating 250W AES, 1000W peak Sensitivity 98.6dB @ 1W/1m Maximum SPL (Continuous) 122.5dB at 1m Nominal Impedance 8Ω Dispersion 60°conical Transducers 12” Coaxial LF driver 1″ (coaxially mounted HF compression driver Enclosure 16mm Birch plywood vented enclosure Grill Acoustically transparent MS grill Finish Black impact resistant structured coating Connector 2 x Speakon connector. Approved Make: PULZ/ BOSE/ MEYER SOUND
2
40800
81600
... More
Control Room Speaker: Supply, installation, testing & Commissioning of the 2-way speaker with Frequency Response 100Hz to 20kHz, Power Rating 150W AES, 600W peak, Sensitivity 92.5 dB @ 1W/1m, Maximum SPL 114dB continuous, 120dB peak @ 1m, Nominal Impedance 8Ω, Dispersion 90° conical, Low Frequency Driver of 5”, High Frequency Driver of 1″, with mounting bracket. Approved Make: PULZ/ BOSE/ MEYER SOUND
1
46750
46750
... More
Amplifier: Supply, Installation, Testing, & Commissioning of Class AB amplifier with No.Of Channels 4 Output Power(per channel) 4 X 480 Watts @ 8Ω 4 X 820 Watts @ 4Ω 2 X 1380 Watts @ 8Ω in bridge mode Frequency Response 20Hz - 20kHz, +0/0.5dB Total Harmonic Distortion + Noise 0.1% Signal to Noise Ratio 110dB. Approved Make: PULZ/ BOSE/ MEYER SOUND
3
94180
282540
... More
Speaker Management System: Supply, Installation, Testing, & Commissioning of 8-In, 8-Out Digital Speaker Processor 24 bit A/D and D/A convertor, 48kHz sampling rate, 8th order filters for crossover, Automatic Mixer & Matrix Mixer, 31 PEQ per input and 10 PEQ per output. Approved Make: PULZ/ BOSE/ MEYER SOUND
1
263802
263802
... More
Wireless Handheld Mic: Supply, installation, testing & Commissioning of Digital wireless handheld Microphone with UHF transmission greatly enhances range, reliability and scalability of 56 MHz Bandwidth will allow for up to 90 channels Up to 2,200 or more selectable frequencies with Mobile App integration setup 134 dB or more transmitter dynamic range Lithium Ion battery pack delivers up to 10 hours of operation (up to 6 hours of operation with AA batteries) Transducer principle dynamic with Pick-up pattern cardioid, Sound pressure level 154 dB SPL, Transmit power : 10 mW. Approved Make: SENNHEISER/ SHURE/ BEYORDYNAMIC
4
49470
197880
... More
Lavalier Mic: Supply, installation, testing & Commissioning of Digital wireless lavalier Microphone with UHF transmission greatly enhances range, reliability and scalability of 56 MHz Bandwidth will allow for up to 90 channels Up to 2,200 or more selectable frequencies with Mobile App integration setup 134 dB or more transmitter dynamic range Lithium Ion battery pack delivers up to 10 hours of operation (up to 6 hours of operation with AA batteries) Transducer principle dynamic with Pick-up pattern omnidirectional, Sound pressure level 130 dB SPL, Transmit power : 10 mW. Approved Make: SENNHEISER/ SHURE/ BEYORDYNAMIC
1
49470
49470
... More
Instrument Mic: Supply, installation, testing & Commissioning of super-cardioid pre-polarized condenser instrument microphone with frequency response of 40 Hz- 20,000 Hz or better and sensitivity of 3 mV/P at 1 kHz or better , Maximum SPL of 139 dB at 1 kHz. The nominal impedance of 50 Ohm or better, with a min. terminating impedance of 1 kOhm or better. Approved Make: SENNHEISER/ SHURE/ BEYORDYNAMIC
1
26372
26372
... More
Gooseneck Mic: Supply, installation, testing & Commissioning of pre-polarized condenser gooseneck microphone with overall length of 450mm or better, with XLR3M-type connector, shall offer radio frequency interference (RFI) shielding against intermodulation from wireless equipment or devices, cardioid microphone capsule with uniform 120° angle of acceptance (-3dB) or better, frequency response of 50 Hz to 20,000 Hz or better and sound input levels handling capability of minimum 130 dBspl or better, nominal equivalent noise level of 26 Dba or better and output shall be low impedance balanced (100 ohms) with current consumption shall be 3 mA or better. Approved Make: SENNHEISER/ SHURE/ BEYORDYNAMIC
1
27625
27625
... More
Audio Mixing Console: Supply, installation, testing & Commissioning of 24-Channel Premium Audio Mixing Console, 16 Mic Inputs with 48V Phantom Power and HPF per Channel, 24 Line Inputs (16 mono and 4 stereo), 6 AUX Sends + 2 FX Sends, 4 GROUP Buses + ST Bus, 1 Matrix out, 1 Mono out. Approved Make: YAMAHA/ ALLEN & HEATH/ MIDAS
1
210000
210000
... More
Speaker Cable: Supply, installation, testing & Commissioning of High-conductivity copper speaker Cable, 2.5 SQ mm stranded tinned copper conductor, PVC insulation, twisted Pair, PVC jacket. Approved Make: KRYSTALS/ RR KABLE/ FINOLEX
600
138
82800
... More
Speaker Cable: Supply, installation, testing & Commissioning of High-conductivity copper speaker Cable, 4 SQ mm stranded tinned copper conductor, PVC insulation, twisted Pair, PVC jacket. Approved Make: KRYSTALS/ RR KABLE/ FINOLEX
300
214
64200
... More
Signal Cable: Supply, installation, testing & Commissioning of Microphone cable, 20AWG 2 core PVC insulated Cu conduction shielded microphone cable. Approved Make: KRYSTALS/ LIBERTYAV/ BELDEN
200
80
16000
... More
Snake Cable: Supply, installation, testing & Commissioning of 8 Pair Digital Snake Cable – 24 AWG (19/0.12mm) x 2 core ABC copper conductor, PE insulated, core twisted in a circular form, Mylar Polyester Taped, ABC Spiral shielded + Aluminum foil shielded, PVC Inner Sheathed, Matt Finish High Flex Special PVC Overall Sheathed Snake Cable. Approved Make: KRYSTALS/ LIBERTYAV/ BELDEN
200
282
56400
... More
Connector: Supply, Installation, testing & commissioning of Audio Conncetors: XLR, TRS Stereo, RCA, Mono. Approved Make: KRYSTALS/ NEUTRIK/ MX
1
85500
85500
... More
Stage Box: Supply, installation, testing & Commissioning of Stage Box with 8 XLR socket panels including sockets on the stage wall/Floor as required. Approved Make: CUSTOM
3
8900
26700
... More
PVC Pipe: Supply, Installation, Testing, & Commissioning of 32mm PVC Pipe and accessories. Approved Make: AKG/ LEGRAND
400
90
36000
... More
Equipment Rack: Supply, Installation, testing & Commissioning of Equipment rack, 24U or above Closed Equipment Rack with PDU, Shelf, D Nuts, Cooling Fans, Castor Wheels. Approved Make: VALRACK/ NETRACK/ DLINK
1
44400
44400
... More
Video
-
-
-
... More
165'' ACTICE LED: Supply, Installation, testing & Commissioning of Active LED Wall of Pixel Pitch : 1.9 mm or better Minimum Size: 12.0 FT x 6.75 FT (Diagonal 165 Inch) ,with predefined resolution according to pixel pitch (1920x1080). Includes: LED Cabinets, LED Controller & Software .Pixel Density per sqm i.e. 275267 or better, Viewing Angle 160 / 160 or better ,Cabinet -610*343*31 MM, Refresh Rate 3840 Hz or more , Minimum Brightness 800 nits or more, Power Consumption (Max/Avg, KW)-2.83 , Lifetime 1,00,000 hours or more, Contrast TYP 10,000:1 or more , with 2 years warranty , Inbuilt Android Controller with HDMI, USB , Type C Port, having Picture in Picture (PIP) facility. Approved Make: DELTA/ CHRISTIE/ BARCO
1
2950000
2950000
... More
Supply, installation, testing, and commissioning of bracket arrangement for Active LED. Approved make: CUSTOM
1
350000
350000
... More
Digital Podium: Supply, Installation, Testing & Commissioning of Digital Podium with 21.5" Interactive Display with document camera having Motorized Panel Facility, Monitor Highly sensitive Interactive Touch Monitor and mechanism to make the panel stable to avoid any kind of shake while wiring. Screen Type Color LED; Scratch resistant, antiglare & overlay tempered vandal resistant glass (3mm thickness), Size 21.5” (54.61 cm), Resolution 1920 x 1080 (Full HD), Aspect Ratio 16:9/ 16:10, Response Time 8 ms, Brightness 250 cd/m2, Lamp Life Time 20,000 Hrs, Contrast Ratio 1000:1, Computer Interface USB x 1, VGA x 1, DVI x 1, HDMI x 1, Interactive Resolution 4000 Lpi (lines per inch), Viewing Area 477mm x 268mm (H/V), 22 inch, Reading Accuracy ±0.5 mm (center), Tracking Speed 200 points per second, Pen Pressure sensitivity 2048 Levels, Viewing Angles 160(H); 160(V), Touch Finger and Stylus, Ports HDMI in x 1, VGA in X 1, DVI - I in X 1, with gooseneck microphone facility, USB 2.0 A Type for Touch, Power 12V(DC) 3.5 Amp. Approved Make: PEOPLELINK/ GLOBUS/ UNI
1
290000
290000
... More
CPU: Supply, Installation, Testing & Commissioning of CPU with Intel® Core i5, 8 GB RAM or better, 1TB SSD or better, and preloaded Windows OS and MS Office with mouse and keyboard. HDMI, USB 3.0 Ports. Mini cabinet. Approved make: HP/ DELL/ LENOVO
1
97500
97500
... More
Transmitter: Supply, installation, testing and commissioning of a Transmitter with 1x HDMI input and 1x RJ-45 output which should support a resolution up to 4K60 4:4:4 video, It should support the HDCP up to 2.3, For UHD and 4K signals, TX . should be able to pass HDCP 2.2, EDID, & CEC. Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio. A cable length up to 130 ft (40 m) for UHD and 4K. Approved Make: CRESTRON/ LIBERTYAV/ EXTRON
3
52140
156420
... More
Receiver: Supply, installation, testing and commissioning of a Receiver with 1x RJ-45 input and 1x HDMI output which should support a resolution up to 4K60 4:4:4 video, It should support the HDCP up to 2.3, For UHD and 4K signals,RX.Should be able to pass HDCP 2.2, EDID, & CEC. Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio. A cable length up to 130 ft (40 m) for UHD and 4K. Approved Make: CRESTRON/ LIBERTYAV/ EXTRON
3
52140
156420
... More
4x2 HDMI Matrix Switcher: Supply, installation, testing and commissioning of HDMI Switcher with 4X4 configuration which should support 4K60 4:4:4 HDR Presentation System, HDMI ports support video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported. At the input end it should have minimum 4x HDMI inputs and 4x HDMI at the output. HDCP 2.3 compliance should have HDMI audio de-embedding built-in. Should suppport enterprise grade security. Should have 1X Ethernet with IEEE 802.1X, Secure CIP, Authentication, SSH/SSL, TLS. Should have 1 RU 19-inch with mounting accessories. Should have power supply or external power supply sould be included. Approved Make: CRESTRON/ LIBERTYAV/ EXTRON
1
273580
273580
... More
1X2 HDMI Splitter: Supply, Installation, Testing, & Commissioning 1 in 2 out HDMI distribution amplifier/splitter which should be HDMI 2.0 4K@60Hz 4:4:4 HDCP 2.2 Compliant and each output of the DA can independently support automatic down‐scaling from 4K to 1080P if required. The DA should supports multiple HDR formats including HDR10 and Dolby Vision along with PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS‐HD Master Audio and DTS:X audio formats. Approved Make: EXTRON/ LIBERTYAV /CRESTRON
1
27534
27534
... More
HDMI Cable: Supply, Installation, Testing & Commissioning of 15mtr. High-performance Cables With Molded HDMI Connectors At Both Ends. HDMI Standard Supports High-definition Video Plus Multi-channel Audio In A Single Cable. Approved Make: EXTRON/ LIBERTYAV /CRESTRON
1
19876
19876
... More
HDMI Cable: Supply, Installation, Testing & Commissioning of 1.5mtr. High-performance Cables With Molded HDMI Connectors At Both Ends. HDMI Standard Supports High-definition Video Plus Multi-channel Audio In A Single Cable. Approved Make: FALCON/ LIBERTYAV /CRESTRON
8
5350
42800
... More
Cat6A Cable: Supply, Installation, Testing & Commissioning Cat6A 23AWG U/FTP Cable with neccesary accessories. Approved Make: LEGRAND/ MOLEX/ DIGISOL
500
62
31000
... More
STAGE DRAPERY & STAGE LIGHT
-
-
-
... More
STAGE DRAPERY
-
-
-
... More
Light Bar Mechanism:SITC of light bar mechanism to be suspended from the M.S. Grid Structure consisting of 100mm. dia bearing fitted pulley with M. S. bracket, 6mm dia steel flexible wire with adjustable strainer / rope clamp, 48mm OD up to black tube (03mm thick) including 02Ton capacity manual winch for operation of the light bar from the light porch. The entire work to be finished with one coat of redoxid primer and two coats of black enamel paint. ± 5% deviation acceptable. Fabrication drawing to be submitted for approval of EIC by contractor.
2
40060
80121.6
... More
Front-Frill:SITC of front Decorative Frill. Fixed ahead of front curtain, made of plain acrylic velvet fabric of approved make & color, bottom of frill having golden nylon lace (Scallop width 700mm each). At top edge 38 mm Navar tape and. cotton ropes every 0.3 mtrs. Draped to 33% to from plates (velour) etc.. Fabrication drawing to be submitted for approval of EIC by contractor.( Size 12.5 mtr x 1.5 Mtr)
1
33063
33063.6
... More
SITC of Velvet Fabric for Frills (Size 12.5 Mtrx 1.5 Mtr)
1
66786
66786
... More
Frill Bar:SITC of approved quality black color double gathered black cotton cloth curtain including arrangement of frill bar made of 33 mm synthetic enamel paint finish MS pipe hanging by steel wire rope with complete 500kg winch mechanism for adjustment the height etc. Size of frill as per requirement of stage and approval of EIC. Fabrication drawing to be submitted for approval of EIC by contractor. (Size 9 Mtrx 1.2 Mtr)
3
20359
61077.6
... More
SITC of Cotton Fabric for Frills (Size 9 Mtrx 1.2 Mtr)
3
26229
78688.8
... More
Stage Wings:SITC of wings mechanism made of 33.7mm OD MS tube with pivotal & trench mechanism for rotational,forward & backward movement.The entire m.s wings structure to be covered with black cotton cloth.(Size:6000mm H x 1500mm W). Fabrication drawing to be submitted for approval of EIC by contractor.
2
40066
80133.6
... More
SITC of Fabric for Wings (Size:6000mm H x 1500mm W)
2
34971
69943.2
... More
STAGE LIGHT ARRANGEMENT
-
-
-
... More
SITC of 100W High Quality LED parcan Light complete with COB Lamp source 3200K CCT Colour temperature, CRI & TLCI Values above 90, DmX 512 dimming with 2 channel conmtrol, Beam Angle of 9 Degree, Black powder coated housing having IPX4 rating protection against water spray, Lux @ 2 Mtrs above 40,000 suitable for Stage lighting to illuminate the key areas.
4
33802
135208.56
... More
SITC of 200W LED Profile Light 19 degree 3200K color temperature with High quality parameters of CRI & TLCI 95+ Luminaire provided with gel holder, Gobo holding. 0% to 100% Dimming, 3 Channel DmX Control, Manual focus with 4 beam shaping cutters with Master Slave & Manual adjustment.IP20 Rating of Protection.
1
92635
92635.26
... More
SITC of 200W Zoom profile Beam Angle 15° - 38°, 3200K color temperature with High quality parameters of CRI & TLCI 95+ Luminaire provided with gel holder, Gobo holding. Efficient and well designed reflector, 3 Channel DmX Control, 0% to 100% Dimming, with Master Slave & Manual adjustment.IP20 Rating of Protection.
1
131492
131492.16
... More
SITC of High quality Colour corrected Warm LED PAR Light with slim die cast body duly powder coated along with 54X3W, 3200k, Power 120W, beam 25 degree, CRI 85, DMX 512 Auto, master/slave, sound active.
3
12745
38235.6
... More
SITC of High quality RGBW LED PAR Light with slim die cast body duly powder coated along with 54X3W LED, Power 168W, 7 Channels, beam 25 degree, DMX Auto, master/slave, sound active.
3
12145
36436.68
... More
SITC of 4x100W LED Blinder light 30 degree beam angle 3200K CCT High CRI, Manual and DmX modes of operation, 5 Pin XLR for DmX interface, Auto mode and effect inbuilt.
1
56204
56204.28
... More
SITC of Moving Head of 230W Beam with Input Voltage: AC110/220V, 50/60Hz, Lamp：7R 230W, Power: 350W, Life Time: 2200 hours, Color Temperature:8000K, DMX Channel: 16CH, Pan: 540° (16bit), Tilt: 270° (16bit), Color Wheel: 14 colors +open, Gobo Wheel: 17 gobos + open, Effect Wheel: 8 facet rotating prism + frose + shake,Strobe: 0.5-9f/s, roandom or pulse flash, speed adjustable, strobe macro function,Dimmer: 0%-100% mechanical, Beam angle: 0% - 4% mechanical.
1
90204
90204.78
... More
Accessories for the above lights : -
- C clamps,
- Safety bonds - Name plate tags (For All Light)
- Barndoors ( For Warm Par Liight 10 Nos)
1
103419
103419.66
... More
Power control system consisting of following : -
- Power distribution control panel for all the lighting points with necessary metering and safety controls.
- Power Junction boxes 4way IEC & CE, Termination boxes etc.
- DmX dimming junction boxes, dmx IN box for the dimming network.
- Power & Dimming Cables with Connectors
1
228028
228028.88
... More
Digital Dimming system consists of Controller for the LED lights : -
- 96 Channel DmX controller.
- Splitter for the Light dimming network.
- DmX Cables and XLR connectors.
1
343683
343683.78
... More
Supply ,Installation ,testing and commisioning of suspended Round 50 W LED COB Downlight Dali Dimmable with Recessed mounted Led Luminare pressure die cast Aluminium housing with corrision Resistance powder coated using Nano technology with black powder coated and high transmitive PMMA diffuser having 115 mm Dia, with power consumption Maximum upto 50W having system lumen output of Minimum 5000 Lumen. LED chip life of 50,000 burning hours at L70 - Minimum tested for 10K hours for complaince of TM21 projection. The LED used shall have CCT of 3000K, CRI 80. Luminaire driver should be Isolated and multistage constant current APFC type. Driver should be BIS registered with Input voltage range of 150V to 270V ( nominal rated voltage – 240V) with minimum 6 KV surge protection, PF 0.95, THD 15%; IP 20;. Manufacturer need to submit Following Certificates - 1) LM79 Test report from In-House NABL accredited LAB; 2) LM80 Test certificate from the LED chip manufacturer; 3) Photobiological Safety test report as per IS 16108 : 2012/EN62471 from LED chip manufacturer;.MAKE:WIPRO(Model no.LD56LED GIMBAL DALIDIMMABLE SPOT LIGHT)/Eq. model of BAJAJ/ LT/PHILIPS/PANASONIC/CROMPTON/Havells
40
5042
201680
... More
Illumination Glow light for Exit Indication with Battery Back-up.
3
5700
17100
... More
supply ,Installation and testing of 3W LED STEP light with pressure die cast Aluminium housing and high transmitive PMMAdiffuser having 600mm Cutout Dia, with power consumption Maximum upto 3 W having system Luminaire driver should be Isolated and multistage constant current APFC type. Driver should be BIS registered with Input voltage range of 150V to 270V ( nominal rated voltage – 240V) with minimum 2 KV surge protection, PF 0.95, THD 10%; IP 20;. Manufacturer should have In-House NABL accredited LAB. Manufacturer need to submit Following Certificates - 1) LM79 Test report from In-House NABL accredited LAB; 2) LM80 Test certificate from the LED chip manufacturer; 3) Photobiological Safety test report as per IS 16108 : 2012/EN62471 from LED chip manufacturer;.MAKE: PANASONIC/ PHILIPS/ BAJAJ/ CROMPTON/ WIPRO/ HAVELLS/ LT
60
1465
87900
... More
supply ,Installation and testing of Wall Up/Down Light on Column 24 W LED with pressure die cast Aluminium housing and high transmitive PMMA diffuser having EXTERIOR WALL GLAZING, with power consumption Maximum upto 24 W having system lumen output of Minimum 3000 Lumen. LED chip life of 50,000 burning hours at L70 - Minimum tested for 10K hours for complaince of TM21 projection. The LED used shall have CCT of 5700K, . Luminaire driver should be Isolated and multistage constant current APFC type. Driver should be BIS registered with Input voltage range of 150V to 270V ( nominal rated voltage – 240V) with minimum 2 KV surge protection, PF 0.95, THD 15%; IP 20;. . Manufacturer should have In-House NABL accredited LAB. Manufacturer need to submit Following Certificates - 1) LM79 Test report from In-House NABL accredited LAB; 2) LM80 Test certificate from the LED chip manufacturer; 3) Photobiological Safety test report as per IS 16108 : 2012/EN62471 from LED chip manufacturer;. MAKE: PANASONIC/ PHILIPS/ BAJAJ/ CROMPTON/ WIPRO/ HAVELLS/ LT
37
2153
79661
... More
Wall mounted SS Finish with 12 Watt Double neck LED focus light with other required accessories similar to Philips (CAT No:31426- Muzris Double head wall light ) / Equivalent of Jaquar/LT/TRILUX/ Wipro.
6
4271
25626
... More
Ceiling mounted LED Track light suitable for Track mount application. Pressure die-cast Aluminium alloy housing with corrosion resistance powder coating using Nano Technology Single product with Adjustible beam angle feature for achieving various distribution 10 Watt Luminaire housing White or Black with track and all other required accessories similar to LT (CAT No: Z01040T0A0 ZOOM 10W 4000K LED Beam Adjustible Tracklight, 15-50’ Beam angle) / Equivalent of Philips/Jaquar/TRILUX/ Wipro.
10
7701
77010
... More
5 mtr roll LED Flexible strip (10w/mtr) with Driver(60 W) should run on 12 V DC. CCT - 4000/5700/6500k. System Efficacy100lpw. The Dimension of the Strip shoul not be more than 10 mm x 2.5 mm x 500mm . Ingress Protection of Min IP 65. The Driver should also be IP67 Protected similar to LT (CAT No: LTMAZEST050W6500)/ Equivalent of PHILIPS/ Wipro. (Auditorium Hall)
52
1310
68120
... More
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years .
4
728
2912
... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years
4
736
2944
... More
Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The
luminaire should be Replacement Warranty will be 2 years
20
1540
30800
... More
SITC of i-Sense wireless IoT System having BLE 5.2 AES 128 Bit encyption based 32 child DALI controller and analog 2 channel (0-10V) output, operates on 100-277 VAC, 10- 30mA, 50Hz, DALI 2.0 protocol. Sensor input of 0-3V DC & 1mA. For analog dimming, It provides output voltage of 0- 10V DC +/- 0.2V and 15mA per channel. For DALI output, it provides 12-20V DC and 160mA max for 32 DALI devices. An auxillary power output of 3.3VDC and 30mA. 0 - 100% dimming, device to device range 45m. Controller must control individually control standard DALI or Tunable DALI Drivers independantly or combination of both. Operating temperature -20 to 50 deg celsius, surge protection 3kV. System shall support easy commissioning and configuration via Mobile Application along with user and site management features. Optional Cloud Application must be available for control and monitoring of the devices along with analytics reports. Mobile Application shall have features of individual & group control for on/off/dimming/ colour tuneing / Scene Control / Animation etc. Device must have security key for commissioning and replacement for future. MAKE: PANASONIC/PHILIPS/BAJAJ/CROMPTON/WIPRO/HAVELLS/LT
2
22550
45100
... More
SITC of i-Sense BLE 5.2 AES 128 Bit encyption based wireless battery powered 5-button wall switch that controls ON/OFF, intensity and CCT of an individual or group of luminaires.Operates on 3V DC input voltage in an ambient temperature of 0 to 50 deg celsius and device to device range 45m. System shall support easy commissioning and configuration via Mobile Application along with user and site management features. Optional Cloud Application must be available for control and monitoring of the devices along with analytics reports. MAKE: PANASONIC/ PHILIPS/ BAJAJ/ CROMPTON/ WIPRO/HAVELLS/LT
1
5500
5500
... More
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/ legrand( Myrius)/ Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/ legrand( Myrius)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
Group C
228
1275
290700
... More
Supply and fixing of modular metal box on surface or recess with suitable size of modular cover in front including providing an fixing of ISI marked 16Amp modular plug with switch with all conection. on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius)/Schnider(Zencelo)//PANASONIC(VISION)
10
683
6830
... More
Supply and fixing of ISI marked modular type 2nos 6Amp socket with switch on suitable size of metal box and modular cover in front on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius)/Schnider(Zencelo)//PANASONIC(VISION)
10
937
9370
... More
Supplying and installation of 25A AC starter Modular type, Schneider/Siemens/Legrand coil voltage-230 Volt A.C. on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
3
626
1878
... More
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
-
-
-
... More
4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 with configuration of incomming 8 modules & out going-12 modules,suitable for Flush mounting and Surface mounting with Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years
4
4270
17080
... More
Supplying and fixing 40-63 Amps rating, C series,10KA breaking capacity,4P, 415 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
2
2966
5932
... More
Supplying and fixing 32 Amps rating, C series,10KA breaking capacity,4P, 415 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
2
1820
3640
... More
Supplying and fixing 63 Amps rating4P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The MCB should be Replacement Warranty will be 3 years.
4
5239
20956
... More
Supplying and fixing 6-32amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
6
1525
9150
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
42
321
13482
... More
Submains:Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
-
-
-
... More
2 x 1.5 sq.mm. + 1 x 1.5 sq.mm.
810
157
127170
... More
2 x 2.5 sq.mm. + 1 x 1.5 sq.mm.
450
171
76950
... More
2 x 4 sq.mm. + 1 x 1.5 sq.mm.
80
188
15040
... More
4 x 6.0 sq.mm. + 2 x 4 sq.mm.
160
317
50720
... More
4 x 10.0 sq.mm. + 2 x 6 sq.mm.
160
444
71040
... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .(With fan Regulator)
-
-
-
... More
1200 mm sweep
1
3724
3724
... More
S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision)
2
374
748
... More
Supplying, installation, testing and commissioning of wall mounted fan including earthing etc as required (Make : Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells).
-
-
-
... More
400 mm sweep 1300 RPM
1
2806
2806
... More
Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 300mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
350
972
340200
... More
Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 200mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
300
605
181500
... More
DLP Mini Trunking System Polyvinyl Chloride (PVC)
-
-
-
... More
Supply & laying of DLP Mini Trunking System Polyvinyl Chloride (PVC); Non-flame propagating comply with: EN 60695-2-11 glow wire test: 650°C / 30s ,EN 60695- 2-4 burner 1KW / 60s , Plastic material shall be RoHS material,colour shall be in White RAL 9003. DLP trunking system shall respect IK07 according to the EN 50085-2-1 standard at ambient temperature and other required accessories as per direction of Engineer-in-charge.
-
-
-
... More
32X16 Body With Cover with Changeable Internal/External Angle Changeable Flat Angle Flat Junction & End Cap
35
234
8190
... More
80X50 Body 010412 with Cover, Cover Joint, Body Joint, Internal & external Angle, Flat Angle, Flat Junction & End Cap.
45
1404
63180
... More
UPS & Other Accessories
-
-
-
... More
UPS
-
-
-
... More
Supply ,installation ,testing & commissioning of 30 KVA Parallel UPS SYSTEM WITH IGBT based inverter system, true online double conversion system, inbuilt isolation transformer & automatic phase sequence corrector of 3ph in put to 3 ph output,415V, with built in BMS with battery back up up to 30 minutes with MS Rack for battery Housing, DC cable 7 Mtr with SFU and links for installation (Battery required: 12V, 65AH, 40 No.s) protection for fault by OL,UV,EF,GF,OC,Ph. (Make:Numeric/APC/ Vertiv/) as per direction of Engg.-in-Charge. Warranty period of all accessories & component & system must be 2 years & complete test certificate must be submitted along with ups including component list &
SLD.
1
802000
802000
... More
Cables, Cable Laying & Termination
-
-
-
... More
Supplying & Testing of 1.1 KV grade Aluminium XLPE power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply.
-
-
-
... More
4C X 10 sqmm
200
313
62600
... More
3.5C X70 sqmm
300
761
228300
... More
CABLE LAYING
-
-
-
... More
Laying of One No. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/MASONERY TRENCH/HDPE Pipe/Metal Pipe/On Wall Surface(Clamped with saddle/PVC & UPVC Pipe)/ Cable Tray as required.
-
-
-
... More
Upto 35 sq. mm
200
32
6400
... More
Above 35 sq. mm and upto 95 sq. mm
300
87
26100
... More
TERMINATION OF CABLES
-
-
-
... More
Supply & Making end Termination with brass compression gland and Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable)
-
-
-
... More
4C X 10 sqmm(19 mm)
14
209
2926
... More
3.5C X 70 sq. mm (38mm)
4
275
1100
... More
Earthing & Other Accessories
-
-
-
... More
Earthing System
-
-
-
... More
Providing and fixing 25 mm X 5 mm dia GI strip on wall/surface or in recess for connection etc. as required.
456
150
68400
... More
GI Raceway
-
-
-
... More
Supply, laying and installation of following rectangular over lapped Box type mig welded 275 GSM Grade GI under floor duct in 1.5 mm thickness, 25 mm height, base and cover supplied in 2.5 meters per length with additional accessories of Duct connecting shackle cum fastening Clamp, vertical access box, etc. in line with EN 50085-2-2. These ducts must have "L" shaped spot welded partitions (for multi compartment ducting) of the same thickness as base and cover and all the spot welded joints and mig welded covers shall have to be galvanized for maintaining the required galvanizing coating thickness referred above.
-
-
-
... More
100 x 25 , 1 compartment 1.5mm thickness
35
825
28875
... More
Supply and installation of following Under floor pre galvanized (275 gsm) Junction box Powder coated trap and frame fitted with 3+2 mm load plate and frame with load bearing capacity of 5 kN with deflection less than 6 mm and permanent deflection of less than 3 mm in line with EN 50085-2-2. Knock outs suitable for metal duct entries on all four sides and necessary recess for accommodating floor finishing material.
-
-
-
... More
172 x 172 mm x 60 mm; up to 200 mm width metal duct entry-10mm recess
24
2064
49536
... More
Supplying of floor box for which back box made of pre-galvanished sheet for mounting LV & ELV points on floor Consist of back box , lid & trim.Height adjustable from 65-90mm for mounting of tile/marble on the top. Cover fitted on to the back box can be opened easily if required. Protection level should be IP 20 & IK 08. Service Outlet system for METAL DUCTS; polyamide trap & frame, pre-galvanised (275 gsm) screed box with polystyrene top cover for height adjustment and screed protection; Load bearing: 3 kN as per EN 50085-2-2, base box duct entry width upto 250 mm. Height adjustable from (65 mm - 105 mm),(65 mm - 90 mm).
4
6940
27760
... More
Miscellaneous Items
-
-
-
... More
Supplying and Laying Rubber mat 1M X 2M X 2.0MM thick to withstand 1.1 KV dielectric strength, Electrical Safety/Shock Chart & SLD etc as required.
4
2464
9856
... More
S/F of Shock Treatment chart duly glazed mounted on Aluminum Frame with sheet glass as required.
12
510
6120
... More
Supplying of Caution Boards manufactured out of 16 SWG, MS sheet of 450mmx 300mm size duly painted white and having `MAN ON LINE' and 'DO NOT SWITCH ON' written in Red complete with hanging arrangement as required and & approved by the Engineer Incharge.
2
140
280
... More
VARIABLE REFRIGERANT VOLUME/FLOW SYSTEM (VRF/VRV)
-
-
-
... More
Supply,Installation, Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling only, having all hermetically sealed inverter type Scroll/Twin rotary Compressor(s), , microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. The unit shall deliver the rated capacity at AHRI Conditions and work even at 49°C ambient temperature without tripping. The unit shall be suitable to work on 380-415 V, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. MS/GI powder coated stand with vibration isolation pads.
The ODU shall have low noise condenser fans with external static pressure of the outdoor unit shall be more than 75 Pa to avoid hot air recirculation, auto address setting, automatic refrigerant charging,auto check function for connection error and complete with indoor and outdoor units with individual controller and with fittings etc. .The Unit should have free phase technology so that unit can work in case of phase reversal also without tripping of units.(Make: MITSUBISHI ELECTRIC /DAIKIN/O-General/Hitachi sigma model )
-
-
-
... More
SITC of 20 HP Nominal Capacity(Make-Mitsubishi Electric/Daikin/Hitachi sigma model)
4
474661
1898644
... More
Air Handling Unit (AHU)
-
-
-
... More
Supply and Installation ,testing and commissing of Double Skin Air Handling Units with mixing box , with vfd based and stardelta bypass Ahu starter panel thermal break profile of horizontal Configuration,50mm thick panel with 0.6mm thick,SS drain pan , weather proof canopy over AHU PUF insulation,pre and fine filter sections,6 RD multiple DX cooling coil suitable for R-410a refrigerant.single/multiple Expansion kit. communication kit,backward fan with plug fan ,spring vibration isolator for fan and motor factory assembled volume control damper,internal power and control wiring,required length of power cable from the starter pamnel.GI base frame complete as per specifications as required. backward Fan motor shall be IE-3 type and suitable for 415+10% VOLTS.50 cycles,3 phase AC supply capacity 55 or above as per ahu coil selection tr,Dehumidified Air. 10500 cfm,TSP 85 mmWC. coil selectionair coil leaving temp: 12 deg with 95 %RH return air : 25deg 55 RH make: VTS/Systemair/edgetech
2
420596
841192.78
... More
VRF/VRV ACCESSORIES :
-
-
-
... More
SITC of Wired Remote for AHUs
2
2495
4990.12
... More
SITC of AHU Kit
4
18900
75600
... More
PART B : LOWSIDE WORKS
-
-
-
... More
Supply & Installation of interconnecting following sizes of refrigerant copper pipe work of following outer diameter, insulated with 25mm thick closed cell electrometric Nitrile rubber tubular insulation between each set of indoor & outdoor units . The pipe dia upto 25 shall be soft seamless & above 25mm dia shall be hard seamless . All piping inside the room shall be properly fixed/supported with suitable size of clamp/ M.S. hanger and all external piping shall run in GI. cable tray etc. as reqd. Make of insulation-K Flex/Armacell/A-Flex Make of pipe-Rajco/Mandev
Liquid/Gas line with 25mm thick class O nitrile insulation with factory laminated GC Cloth for mechnical protection.
-
-
-
... More
34.9mm
41
2490
102090
... More
28.6 mm
42
2100
88200
... More
Supply & installation of 2 core 1.5 sq. mm copper control cum transmission wiring in PVC conduit between indoor & outdoor.
-
-
-
... More
2 C * 1.5 sq. mm Cu communication cable
150
156
23524.5
... More
Supply & installation of PVC drain pipes with 9mm thick nitrile rubber insulation of following sizes (With Elbow, Socket & Reducers).
-
-
-
... More
40mm Dia.
140
156
21956.2
... More
Supply & Installation of G.I Slotted Tray for expose copper piping covered with GI sheet on terrace.
-
-
-
... More
1"x12"x1"
-
-
-
... More
Supply, filling & testing of R410A gas as per site requirements
80
1350
108000
... More
The air distribution system comprises with all supports like anchor fasteners and tie-rods,cradles,angle iron supports,bolts and nuts, 4mm thick self-adhesive neoprene rubber gasket, stiffereners,zinc chromate painted angle iron flanges,chipping and plastering of openings made for duct supports etc. filling the gap with fibre g;lass wool and with fire sealant complete as per specification. The rates quoted shall include turning vanes,straighting vanes,splitters,inspection doors probe,provisions for BAS sensors, inlets with test openings enclosures complete with locking caps,chain,gaskets,insulating plugs and extension for insulated duct work etc. Supply, installation,testing and balancing of Air Distribution System consists of factory fabricated Rectangular/Spiral duct Galvanized iron sheet metal ducting (Zinc coating 120GSM) with TDF/TDC flanges 0.6mm thick GSS ducting (Gauge 24) Make-TATA/Jindal/Sail
420
1155
485100
... More
0.8mm thick GSS ducting (Gauge 22)
135
1337
180495
... More
Supply,Installation,testing and commissing of 15mm antimicrobial acoustic insulation. and all accessories as per specification 15mm thick insulation.make: k flex/armacell/a flex
96
1250
120000
... More
Supply,Installation,testing and commissing of 25mm Nitrile rubber insulation with factory laminated GC Cloth insulation. and all accessories as per specification.make: k flex/armacell/a flex
350
1350
472500
... More
Supply, erection, testing & commissioning of Aluminium powder coated grilles with VCD having flange all around.Make-Glenstorm/Airflow/Systemaire
30
8500
255000
... More
SITC of Jet Nozzle with other accessories as required.
20
3920
78416.2
... More
Supply and Installation ,testing and commissing of motorised actuator based fire damper complete with sleeve for fixing on retrun air opening.The damper shall be spring loaded and suitable for reset to original position.The damper also be provided with limit switch for transferring the signal to AHU starter panel/BMS for tripping the AHU in case of fire .The rate shall be inclusive of control wiring upto the Starter panel/DDC clopsing the opening surrounded by the sleeve with fire glass and fire sealant as per standards Fire Damper.
5
20515
102575
... More
Supply and Installation ,testing and commissing of 7500 cfm smoke exhaust fan with class H insulation 250 degree temprature with standing capacity with motorised mechanical fire damper complete with sleeve for fixing on retrun air opening.The damper shall be spring loaded and suitable for reset to original position.The damper also be provided with limit switch for transferring the signal to AHU starter panel/BMS for tripping the AHU in case of fire .The rate shall be inclusive of control wiring upto the Starter panel/DDC clopsing the opening surrounded by the sleeve with fire glass and fire sealant as per standards Fire Damper.Make-Systemair/Krugger/Greenheck
1
145000
145000
... More
S&F of Fresh air cowl with VCD and bird screen as required.
4
3920
15683.24
... More
PUMPS AND APPURTENANCES
-
-
-
... More
Supplying, installation, testing and commissioning of Electric Motor Driven Pressurization Terrace Pump having discharge of 900 LPM at 35 Mtr head complete with Pump Set, Electric Motor suitable for operation on 415 V ,3 ph, 50 c/s AC supply , Base Frame.Make-Wilo/KSB/Kirloskar
1
80538
80538
... More
Supply, installation, testing and commissioning of Floor/Wall mounted sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base frame, complete with all accessories including interconnections, earth bus etc as required comprising of One (1)- 63 Amp, 10 KA,TPN (Class-C) MCB with 3 Nos Phase indicating lamps with control fuse/ MCB, Digital Voltmeter with selector switch. DOL starter with O/L and Single Phasing Preventor suitable for 7.5 HP motor. ON/OFF indication lamps, Auto manual switch and ON/OFF push button.as per direction of engineer in charge Control panel for fire pumps for auto action.make-Legrand/schneider/Siemens
1
37800
37800
... More
1100 V GRADE POWER/CONTROL CABLES :SITC of FRLS,
PVC outer sheateh, steel armoured, aluminium, 1100v grade power cables with glands etc. The minimum size of the cables shall as mentioned below as per direction of engineer in charge.Make-Polycab/Havels/KEI/Finolex/RR Kabel/Gloster 4C x 16 mmsq
30
480
14400
... More
2 C x 1.5 mmsq
30
141
4230
... More
Supply,Installation,Testing & Commissioning of 'C' Class heavy duty MS pipe (as per IS 1239 upto 100 mm NB and IS 3589 for above 100 mm 6.33mm thick) with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanized nuts and bolts of following size on surface along wall / shaft with MS bracket, suspended from ceiling/ beam with suspenders duly painted with two coats of primer and finished with enamel paint of approved colour laid through pipe or in trench after wrapping with hassen cloth after applying coal tar primer as required as per direction of Engineer-in- charge.Make-TATA/SAIL/JINDAL
-
-
-
... More
100mm NB
66
2457
162162
... More
80mm NB
8
1360
10880
... More
25 mm
8
618
4944
... More
Providing, fixing, testing and commissioning of following size manually operated hand lever type cast iron double flanged slim seal wafer type Butterfly valves with EPDM iron disc as per IS-13095 having pressure ratting PN -1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of E.I.C. Make-Zoloto/Kartar/Kirloskar
-
-
-
... More
100mm NB
2
5330
10660
... More
Providing, fitting & fixing of following size cast iron double flanged type dual plate Non return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of Engineer-in-charge. Make-Zoloto/Kartar/Kirloskar
-
-
-
... More
100mm NB
2
6470
12940
... More
Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves of suitable size with all accessories as per direction of Engineer-in-charge.Make-H.Guru/G.Guru
1
1580
1580
... More
Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off bronze ball valves with integral strainer & flare nut (mixed ends) of suitable size with all accessories as per direction of Engineer-in-charge.Make-Danfoss/Indfoss/Grundfoss
1
3170
3170
... More
Supply,Installation,Testing & Commissioning of stainless steel strainer fabricated out of 1.6 mm thick stainless steel sheet Y Stainer with 3 mm dia hloes with stainless steel flange as required. Make-Zoloto/Kartar/Kirloskar
-
-
-
... More
100mm NB
1
8900
8900
... More
Supply,Installation,Testing & Commissioning of Stainless steel Hydrant Valve / Landing valve, of 63 mm NB size, type-A, single headed , oblique type, as per IS :5290/93 and as per direction of Engineer-in-charge.Make-Newage/Minimax/Fireshield/Kartar
6
6890
41340
... More
Supply,Installation,Testing & Commissioning of SS short branch pipe with 63 mm male inlet and 19 mm outlet nozzle, as per IS:903 and as per direction of Engineer-in-charge. Make-Newage/Minimax/Fireshield/Kartar
6
2380
14280
... More
Supply,Installation,Testing & Commissioning of 63 mm NB and 15meter long RRL Fire Hose fitted with 63mm intstantaneous stainless steel male & female SS coupling, complete by GI wire binding for Internal Hydrant as per direction of Engineer-in-charge. Make-Newage/Minimax/Fireshield/Kartar
12
5870
70440
... More
Providing supply & fixing of MS Hose Box for of suitable size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-charge. Make-Newage/Minimax/Fireshield/Kartar
6
5400
32400
... More
Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 20 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I., complete with all accessories as per direction of Engineer-in-charge. Make-Newage/Minimax/Fireshield/Kartar
6
8276
49656
... More
Providing, fitting and fixing of C.I. 25 MM single air relief valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of Engineer-in-charge.
2
1440
2880
... More
Providing, fitting & fixing of 2-Way GM fire brigade connection consisting of 63 mm dia instantaneous type male couplings with built-in check valves, 150mm dia flanged outlet complete with bolts, nuts and rubber insertions confirming to IS:904 with ISI mark including testing & commissioning the system etc. all complete as per apporoved specification & direction of EIC. Make-Zoloto/Kirloskar/Kartar
2
5911
11822
... More
Supply,Installation,Testing and Commisioning of ISI marked (IS:2878) Fire Extinguisher ,Carbon di-oxide type capacity 4.5kg with all accessories (Ever safe/Fire shield/Ceasefire/Safex)
5
7700
38500
... More
Supply,Installation,Testing and Commisioning of ISI marked (IS:2878) Fire Extinguisher ,ABC type capacity 6kg with all accessories (Ever safe/Fire shield/Ceasefire/Safex)
15
3264
48960
... More
Supplying and installing at approved location approved make fire buckets at 24 gauge galvanized stseel sheet, standard 9 liters capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letter "FIRE" in black and gold. Cost shall be inclusive of Providing MS stand duly painted over a coat of primer (one stand shall be suitable for hanging 5 buckets.
2
3410
6820
... More
SIGNAGES:-Providing and installing in position the following type of sign boards made out of 3mm thick flexyle photoluminescent based glow in dark sheeting with luminous properties enclosed in a weather proof Uvstabilized film with UV screen printing by imported links pasted over3 mm thick cast acrylic from front side with 6 mm thick acrylic, -20 to+80 deg C, Suitablefor indoor use, greenish yellow, glow visible upto 4-6 hr in total darkness.Make-Prolite/Bajaj
1400
18
25200
... More
Supply, Installation,Testing & Commisioning of Microprocessor based Addresable fire alarm control panel , fully networkable with each loop capable of taking 99 devices, 8 line x 40 character alpha- numeric liquid crystal display .The panel shall be soft addressable type . The panel shall be able to give pin point location of all fire/fault conditions. Further, the panel must be able to automatically switch off respective control switches when ever any alarm is triggered. The panel shall have integral SMF lead acid batteries with sealed cells of 24 V capable of running for a minimum of 8 hours with integral battery charger complete as required and as per specification. The fire alarm panel shall be suitable for software integration with BMS & PA system.Make-Morley IAS/Siemens/Bosch/Edward
-
-
-
... More
2 Loop Panel
1
186000
186000
... More
Supplying, installing, testing and commissioning of Addressable Manual Call Point with back box.Make-Morley IAS/Siemens/Bosch/Edward
10
5161
51610
... More
Supplying, installing, testing and commissioning of Analogue Addressable Loop powered Sounder with strobe light.Make-Morley IAS/Siemens/Bosch/Edward
10
6941
69410
... More
Supplying, installing, testing and commissioning of adressable multi sense smoke detector with inbuilt isolator module,base, junction box and other accessories.Make-Morley IAS/Siemens/Bosch/Edward
96
3350
321600
... More
Supplying, installing, testing and commissioning of 2C x 1.5 mm², armoured, single stand, outer sheathed, FRLS, PVC insulated copper conductor cable confirming to specified IS standards .Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI
1100
141
155100
... More
Supplying, installation, testing & commissioning of 6 zone,voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required .Make. Honeywell/Bose/Bosch
1
100736
100736
... More
Supplying, installation, testing & commissioning of digital audio amplifier 480 Watt, 25V rms operating at 240 Volt AC Supply complete as required. Make. Honeywell/Bose/Bosch
1
51800
51800
... More
Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/15 Watt in ABS enclosure complete as required Make. Honeywell/Bose/Bosch
30
2850
85500
... More
Supplying and drawing of speaker cable Single pair, 2-core, 1.5 sqmm in existing conduits.
1800
65
117000
... More
CC Tv
-
-
-
... More
Data Networking System:-Supply and laying of 4 pair Cat6 U/UTP Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Tyco / Legrand / Panduit
1200
62
74400
... More
Supply and Installation of Cat6 I/O with Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold 0.8 μm. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94-V-O certified. Make: Tyco / Legrand / Panduit I/O Single
10
424
4240
... More
Supply and installation of Cat 6, 24-port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make: Tyco / Legrand / Panduit
8
9176
73408
... More
Supply and installation of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Tyco / Legrand / Panduit. 1mtr Lenghth
200
326
65200
... More
2mtrs Length
150
385
57750
... More
Supply and installation of 24 Port Layer2 Giga (10/100/1000BaseT) PoE Switch with 4 x 1Gig SFP Port , Switching Capacity 56 Gbps, Throughput 41.7 Mpps ,Management Port 1 x RJ 45 Console port ,PoE power budget 370 Watt, Switch should support IEEE 802.3af & IEEE 802.3at standard ,MAC Address 16K , Jumbo Frame 12K ,Temperature Working 0°C~50°C, storage -40°C~70°C, Power Supply AC: 100~240VAC.Digisol Model No. DG-GS1528HPE-P/ Eq. model of Cisco/HP
8
75520
604160
... More
Supply and installation of 24 Port Gigabit Fiber Ethernet Access Layer 3 Switch with 16 100/1000Base-XSFP + 8GE Combo(RJ45/SFP)+4 10 Gigabit SFP+ Uplink Ports, Switching Capacity 128Gbps, Throughput 95 Mpps ,CPU ARM7 800M , Packet Buffer Memory 1.5 MB ,MAC Address 16K , ACL Table 1K ,Jumbo frame 10k ,Switch should support IEEE802.3(10Base-T), IEEE802.3u(100Base-TX), IEEE802.3z(1000BASE-X), IEEE802.3ab(1000Base-T), IEEE802.3ae(10GBase), IEEE802.3x, IEEE802.3ak(10GBASE-CX4) ,Switch should support Static Routing, RIPv1/v2, OSPFv2,BGP4,OSPFv3, BGP4+Temperature Working 0°C~50°C, storage -40°C~75°C, Power Supply AC: 100~240VAC, 50~60Hz + 12VDC RPS. Digisol(Model No. DG-GS4628SE2)/Cisco/HP/Juniper
1
96200
96200
... More
Supply and installation of Dual band 802.11ax WiFi6 Dual Band Access Point. Complying PoE+ for power, with inbuilt on premise virtual controller as well cloud based controlling and administration of WiFi systems All hardware should supplied with necessary mounting brackets and IN power cord with 3 years of comprehensive onsite warranty. Make: Cisco/Digisol/Netgear
17
22500
382500
... More
Supply and installation of 1G-LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM. Make: Cisco/Digisol/Netgear
9
6000
54000
... More
Supply and laying of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173-1:2002 / IEC 60794-1/IEC 60793-2-50 class B1.3 / EN 60793-2-50: class B1.3 / ITU Recommendation G.652.D - the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 - 2002 incl. 802.3ae ) Jacket. Make: Tyco / Legrand / Digisol
250
111
27750
... More
Supply and installation of 24 Port Rack mount Draw Type Loaded LIU available in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 24 SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,ADAPTER, SM, SIMPLEX SC, PC TYPE ,Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR-326-Core and PIGTAIL, SM (OS2), SIMPLEX SC, PC TYPE, 2M, LSZH ,Insertion Loss : = 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC= 45db, UPC=50db, APC=60db ,LSZH Jacket-Reduced Toxic Gasses Emitted During Combustion , 100% Factory Tested , Low Insertion Loss and Return Loss.Make: Tyco / Legrand / Digisol
1
19419
19419
... More
Supply and installation of 6 Port Rack mount Draw Type Loaded LIU available in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 6 SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,ADAPTER, SM, SIMPLEX SC, PC TYPE ,Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR-326-Core and PIGTAIL, SM (OS2), SIMPLEX SC, PC TYPE, 2M, LSZH ,Insertion Loss : = 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC= 45db, UPC=50db, APC=60db ,LSZH Jacket-Reduced Toxic Gasses Emitted During Combustion , 100% Factory Tested , Low Insertion Loss and Return Loss. Make: Tyco / Legrand / Digisol
7
8002
56014
... More
Supply and installation of OFC PATCHCORD, SM (OS2), DUPLEX LC-SC, PC TYPE, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : = 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC= 45db, UPC=50db, APC=60db. Make: Tyco / Legrand / Digisol
9
1554
13986
... More
Supply and installation of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make: Valrack/Rittal/ APW
7
8177
57239
... More
Supply & fixing of 24U 600/650D UL Listed Floor mount Rack loaded with one no 10Skt 5/15A power distribution unit, 4nos cable manager, Four nos 90CFM FANs, 1no HD Self and one pkt H/W screw. Make : Netrack/Valrack/Rittal/APW
1
35800
35800
... More
IP CCTV Surveillance System:Suppy and installation of 5 megapixel base Dome camera support video compression H.26+/H.265(HEVC)/H.264+/H.264/MJPEG, built-in intelligent analytics-region Entran, Region Exiting, Advance Motion Detection, Tamper Detection, Line Crossing, Loitering, Object left, Object removed. People counting-Count the number of people entering or exiting, up to 4 detection areas for regional people counting. Built-in Microphone. IP67 and IK10 compliant 120dB super WDR, IR Distance of upto 50mtr Make- Honeywell 20 series/pelco/axis
30
12500
375000
... More
SITC of 64Ch Network Video Recorder, Support Ultra H.265/H.265/H.264 video formats Supports mainstream cameras of ONVIF conformance(Profile S, Profile G, Profile T and RTSP protocols. Support 2-ch HDMI, 1-ch VGA. HDMI1 and HDMI2 up to 4K (3840x2160) resolution Up to 12 Megapixels resolution recording. Support 8 SATA HDDs, Up to 10TB for each HDD. Support cloud upgrade. Make- Honeywell 20 series/pelco/axis
1
196844
196844
... More
SITC of 8TB Surveillence Hardisk. Make: Segate/WD
2
19356
38712
... More
Supply and Installation of 55" UHD IPS Commercial Digital Display for Small Size Discussion & Chambers: Brightness (330 nits or higher), Dynamic Contrast Ratio (Dynamic MCI (Hz)):1000000:1), 1000000:1, Static (Panel) Contrast Ratio-1200:1, Response Time (G to G)-8 ms, Refresh Rate.-60 Hz, Life span (hrs)-30,000, Speaker (Sound Output):10W + 10W, Speaker System: 2.0 ch, DVB-T2/C Broadcasting System, Commercial Smart UX, webOS version (webOS 6.0), BIS Certification with 3 years onsite warrenty. Make: Samsung/ LG /SONY
1
87750
87750
... More
Supply, Installation, Testing & Commissioning of 13 (Thirteen) Passenger lift gearless with Machine room,Elevator G+3 Floors with ACVVVF drive/ ARD, 2 hr. Fire rated door,=1.00 MPS with simplex Collective Selective Control without attendant car position indicators, battery operated alarm bell & emergency light, Ss interior with white granite flooring car interior, centre opening automatic sliding stainless steel Silver Sky finish doors for car entrance, civil electrical materials as specified eg.SS Material shall be of grade-SS304 and thickness not less than 1.6mm. Machine beams, buffer support channels, facia plate including sills pit ladder metal screen in Elevator pit etc.as per specification including cost of (i)Overload detection, (ii)Voice announcement, (iii) Intercom, (iv)Brailie Buttons with all Civil & Electrical works required for installation of Elevator in the existing lift well and machine room, scaffolding ,floor cutting etc. Hoist way wiring and other associated wiring including Fireman's switch complete in all respect as per direction of Engineer in charge. The Elevator should be suitable for physically handicapped person. Make:- OTIS/Johnson/Schnidler
2
1968750
3937500
... More
160 KVA DG
-
-
-
... More
Supply, Transportation, erection, testing and commissioning of 3 Phase, 415V, 50Hz, water cooled multi cylinder diesel generator set with alternator of 160KVA ( Make -Kirloskar / Jakson/Mahindra) out put contineous rating directly coupled Engine and Alternator with guard and mounted on a common base plate of Robust construction and complete with AMF panel having IP-52 protection, Acoustic Enclosure as per CPCB IV+ norms , sound absorbing material, to restrict sound level up to 75 dB up to 1 mtr distance and as per CPCB IV+ norms etc as per following specifications mentioned below. Warrentee period must be 2 years
-
-
-
... More
ALTERNATOR:The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21.
-
-
-
... More
ENGINE: Diesel Engine start, developing suitable BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 160KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc.
01. Exhaust pipe of required size and length with insulation or clading.
02. Diesel tank suitable for 8 to 10 Hours running capacity.
03. Residential Silencer.
04. SMF Batteries with leads as per the Manufacturer standards
-
-
-
... More
AMF PANEL: Cubical, Compartmentalized, AMF Panel Baord with all Power & Control Contractors, Switches, Meters and other accessories, Internal Wiring, connection, inter-connection etc. for Trouble Free smooth function for 160KVA DG Set complete with Battery Charger & leads as required.
-
-
-
... More
BASE PLATE: Common Base Plate of required size for mounting of Engine Alternator Set fabricated from MS Channerl and vibration damping arrangement with cushy foor mounting including paintng etc. as required.
-
-
-
... More
FOUNDATION: Suitable size Cement Concrete (1:2:4) foundation duly plastered and finished with neat coat Cement as required along with smoke exhaust system piping including base frame of structure & lightening protection system. *It also includes 2 nos copper plate earthing for body and 4 nos copper plate earthing for neutral, control cable of 15mtr 2.5sqmm 6core , civil foundation work. (The Manufacturing of DG set shall not in any case be more than six months old from the date of award of work)
1
2339040
2339040
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%