Rural Development Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Technical
Technical
Financial
Additional Eligibility
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender includes 'A' class, 'Special' class, 'B' class, 'C' class, and 'D' class contractors.
Bid Capacity
... View More
The formula for Assessed Available Bid Capacity is (A*N*2 - B), where A is the Maximum value of works executed in any one-year, B is the Value at current price level of existing commitments and ongoing works, and N is the Number of years prescribed for completion of the works.
Technical Capacity
... View More
The required prior work experience for the bidder includes road works, bridge works, building works, irrigation works, and other similar projects. The bidder needs to have completed or substantially completed projects with a certain amount and percentage of similar works. For road works, the bidder needs to have completed projects with a value of 90% of the component, with 5% of the component being the minimum value. For bridge works, the bidder needs to have completed projects with a value of 90% of the component, with 5% of the component being the minimum value. For building works, the bidder needs to have completed projects with a value of 90% of the component, with 5% of the component being the minimum value. For irrigation works, the bidder needs to have completed projects with a value of 90% of the component for structural work and earth, canal, and embankment work, with 5% of the component being the minimum value. For pipeline work and sewer line work, the bidder needs to have completed projects with a value of 70% of the pipe component and 20% of the machinery and other material component. The minimum value of the project for availing the incentive clause is as follows: - Building work/PH work: Rs. 40.00 lakhs
- Road work: Rs. 3.00 crores
- Irrigation work: Rs. 10.00 crores The bidder should have executed works worth 50% of the estimated cost put to tender, executed during any 3 financial years taken together of the last preceding 8 years. The bidder needs to provide a certificate from an officer not below the rank of Superintending Engineer or equivalent officer, and also provide year-wise expenditure incurred for each project, with a break-up of the amount in rupees (in lakhs). The bidder also needs to provide reasons for delay in starting or completion of the project, if any.
Costs
EMD
₹ 8,11,898Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CERWI_112377_1Bid Award Id
ViewTender No
TenderRWCSBP23of2024-25Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://omms.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
SINGLE QUARTER
72.15
298
21522.35
... More
FAMILY QUARTER
67.12
298
20021.9
... More
Supplying and Filling foundation trenches , plinth and ditches with clean course river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and all taxes of sand,cost and conveyance of water, cost of all Labour,labour cess,T and P required for the work etc. complete in all respect as directed by the Engineer- in -charge. ACADEMIC BLOCK
499.4
1276
637334.28
... More
BOYS HOSTEL
67.49
1276
86130.74
... More
GIRLS HOSTEL
67.49
1276
86130.74
... More
SINGLE QUARTER
43.94
1276
56076.23
... More
FAMILY QUARTER
54.09
1276
69029.66
... More
Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m. ACADEMIC BLOCK
81.3
198
16170.57
... More
BOYS HOSTEL
49
198
9746.1
... More
GIRLS HOSTEL
49
198
9746.1
... More
SINGLE QUARTER
21.6
198
4296.24
... More
FAMILY QUARTER
20.1
198
3997.89
... More
Disposal of surplus excavted materials by mechanical means from the work side etc. complete. upto 5km. LeadACADEMIC BLOCK
108.4
151
16386.83
... More
BOYS HOSTEL
65.4
151
9886.52
... More
GIRLS HOSTEL
65.4
151
9886.52
... More
SINGLE QUARTER
28.9
151
4368.81
... More
FAMILY QUARTER
26.8
151
4051.36
... More
Providing and laying Plain cement concrete of proportion(1:3:6) in foundation and floors(i.e. below the base course of the flooring) using cement, 40mm. Size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry inclduign hoisting, lowering and laying concrete to the required level, ramming,watering and curing etc. completek to required levels, laid in layers not exceeding 15cm thick in each layer including cost, conveyance, loading, unloading,royalities and taxes of all materials, cost of all labour,T and P required for the work including shoring,shuttering anddewatering(if required) including hire and running charges of water pump required for the work etc. complete in all respect as directed by the Engineer-in-charge.ACADEMIC BLOCK
165.54
6013
995441.68
... More
BOYS HOSTEL
62.26
6013
374388.06
... More
GIRLS HOSTEL
62.26
6013
374388.06
... More
SINGLE QUARTER
24.28
6013
146002.92
... More
FAMILY QUARTER
26.91
6013
161817.9
... More
Providing and laying in position ready mixed M-25 grade concrete having compressive strength at 28 days test not less than 300 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , including the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,Labour cess and T and P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Foundation Footing
210.2
4684
984660.88
... More
Rcc Column
5.06
13790
69780.44
... More
Plinth Beam
112.6
13790
1552821.56
... More
Ground floor Rcc Column
64.83
13790
894044.6
... More
RCC Roof Beam
113.01
13790
1558475.71
... More
RCC Roof Slab
285.52
11826
3376645.18
... More
RCC in Roof slab (Double stage shuttering)
35.57
21807
775685.66
... More
RCC in Stair case
20.63
13679
282214.27
... More
RCC Lintel
32.28
12304
397192.49
... More
RCC in Sill
17.1
12304
210408.66
... More
RCC Chajja
70.6
1108
78260.1
... More
RCC in Platform slab
10.06
1108
11151.51
... More
First floor Rcc Column
61.68
15813
975352.01
... More
RCC Roof Beam
107.5
15813
1699908.25
... More
RCC Roof Slab
195.69
13455
2633185.07
... More
RCC in Stair case
12.76
15813
201775.16
... More
RCC Lintel
21.79
14029
305711.52
... More
RCC in Sill
14.53
14029
203854.45
... More
RCC Chajja
46.99
1282
60255.28
... More
RCC Platform slab
10.06
1282
12899.94
... More
Terace floor Rcc Column
13.54
18234
246889.71
... More
RCC Roof Beam
5.3
18234
96640.73
... More
RCC Roof Slab
21.89
15405
337226.4
... More
RCC Lintel
2.91
16094
46834.41
... More
RCC in Sill
1.39
16094
22371.08
... More
RCC Chajja
4.51
1490
6722.61
... More
Cutting,straightening coiled or bent up HYSD/TMT Reinfocement Bars welding or jointing if necessary ,bending, binding,tying the grills as required for R.C.C. works,providing Fan Hooks where necessary and hoising,lowering and placing the same tin proper position according to the approved eesigns and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T and P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only) Foundation
303.61
8766
2661475.62
... More
Ground floor
629.84
8766
5521240.42
... More
First floor
519.97
8798
4575112.04
... More
Terace floor
56.99
8833
503404.07
... More
Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 25c.m x 12 c.m x 8 c.m in Super structure having crushing strength not less than 75 kg per square c.m. with cement and screened and washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties , all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T and P required for the works etc. complete in all respect as directed by the Engineer-in-charge. Foundation
57.1
5654
322883.37
... More
Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 25c.m x 12 c.m x 8 c.m in Super structure having crushing strength not less than 75 kg per square c.m. with cement and screened and washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties , all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T and P required for the works etc. complete in all respect as directed by the Engineer-in-charge. (A/R 2006, Pg-71, item no-3) Ground floor
507.91
5688
2888992.08
... More
First floor
412.27
6059
2498026.38
... More
Terace floor
116.68
6485
756739.81
... More
Providing 12mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement and screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T and P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Outer side) Ground floor
1264.57
194
245958.87
... More
First floor
1333.41
202
269615.5
... More
Terace floor
513.37
210
107910.37
... More
Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement and screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary)including watering and curing,rounding of corners etc. complete with cost,conveyance,loading, unloading,royalities and taxes of all materials,cost of all labour,T and P and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Inside PLastering) Ground floor
2874.75
278
801192.83
... More
First floor
2907.9
285
830496.24
... More
Terace floor
511.14
292
149610.68
... More
Providing 6 mm thick cement plaster in cement mortar of mix (1:4) at all height using screened and washed sharp river sand for mortar with approved quality of cement to the ceiling of the Roof Slab, Staircase, Beams, Columns,Landings, Railings,Chajja ,Fins ,Walls ,Jally and Shelves etc. including roughening, scraping, chiseling, cleaning, closed deep chipping with slurry treatment and finished smooth to all R.C.C. Surface including cost, conveyance, loading, unloading, royalties ,stacking and all taxes , cost of all Labour,Labour cess ,Sundries, T and P, Scaffolding, Watering, Curing etc. complete in all respect as directed by the Engineer- in- charge. Ground floor
1649.54
212
350692.2
... More
First floor
1530.51
217
333498.13
... More
Terace floor
74.59
223
16670.87
... More
Priming one coat with water bound wall cement primer. OUTERSIDE Ground floor
1264.57
81
102809.54
... More
First floor
1333.41
84
112806.49
... More
Terace floor
513.37
88
45227.9
... More
INNER SIDE Ground floor
4524.29
81
367824.78
... More
First floor
4438.39
83
369717.89
... More
Terace floor
585.73
85
49962.77
... More
Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost of scaffoldings, staging charges with cost of all material and taxes labourT and P etc complete. (A/R 2006, Pg-236, item no-2) Ground floor
5788.84
83
485683.68
... More
First floor
5771.8
84
489448.64
... More
Terace floor
1099.09
85
94301.92
... More
Painting two coats with plastic emulsion paint with a approved quality primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary and cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T and P etc. complete as per the direction of the Engineer-in-charge. Ground floor
4524.29
107
486813.6
... More
First floor
4438.39
109
486891.38
... More
Terace floor
585.73
111
65543.19
... More
Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make and with a approved quality primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T and P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge. Ground floor
1264.57
99
125951.17
... More
First floor
1333.41
103
137607.91
... More
Terace floor
513.37
107
54930.59
... More
Providing Mat finished Granite stone prepolished 20mm thick of area above 0.40 Sqm in flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 6mm thick bed of Tile Adhesive laid in proper slope and gradient ,grouting the joints with Tile Grout mixed with required quantities of pigments of approved make to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, Labour cess ,sundries, T and P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.Tile Adhesive Make:-UltraTech Tilefixo NT.Tile Grout Make:-UltraTech Tilefixo Grout CG. Ground floor ACADEMIC BLOCK
2.58
3146
8117.45
... More
First floor ACADEMIC BLOCK
2.58
3175
8193.05
... More
Providing 16mm. thick finished kota stone flooring using kota stone of approved quality, colour and size above 0.10 sqm in floors, treads on steps and landing on 6mm thick bed of Tile Adhesive, grouted with Tile Grout mixed with required quantity of pigment of approved marks to match the shades of the kota stone to kota colour if required, watering and curing for the required period , including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T and P required for the work including cost of rubbing mechanically and wax polishing etc complete in all floors at all height in all respect as directed by the Engineer-in-charge.Tile Adhesive Make:-UltraTech Tilefixo NT.Tile Grout Make:-UltraTechTilefixo grout CG. ACADEMIC
9.6
1289
12377.28
... More
BOYS HOSTEL
76.8
1289
99018.24
... More
GIRLS HOSTEL
76.8
1289
99018.24
... More
Providing 16mm. thick finished kota stone in dado/skirting using kota stone slab above 0.10 sqm of approved quality, colour and size in dado, risers of steps on 6mm thick bed of Tile Adhesive (IS15477), grouted with Tile Grout laid in proper slope Tile Grout mixed with required quantity of pigment of approved marks to match the shades of the kota tiles to kota colour if required, watering and curing for thr required period, including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T and P required for the work including rubbing mechanically and wax polishing etc. in all floors at all height complete in all respect as directed by the Engineer-in-charge.Tile Adhesive Make:-UltraTech Tilefixo NT.Tile Grout Make:-UltraTech Tilefixo Grout CG. ACADEMIC
1.92
1539
2956.61
... More
BOYS HOSTEL
10.95
1539
16861.91
... More
GIRLS HOSTEL
10.95
1539
16861.91
... More
Providing vitrified tile flooring using vitrified tiles having thickness of 8mm to 10mm conforming to IS 13755 of 600mmx600mm (Plain Ivory) (homogeneous) of premium quality (Make :- NITCO / RAK / Johnson or equivalent) in floors, treads on steps and landings on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T and P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. Ground floor
1654.45
1142
1890705.46
... More
First floor
1144.67
1156
1323238.52
... More
Terace floor
32.41
1169
37916.46
... More
Providing vitrified tile in dado/ skirting using vitrified tiles having thickness of 8mm to 10mm conforming to IS 13755 of 600mmx600mm, (Plain Ivory) (homogeneous) (Make :- NITCO / RAK / Johnson or equivalent) in dado/ skirting,riser of steps,wall on on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shadesof the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, Labour cess ,sundries, T and P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. Ground floor
172.98
1416
244974.28
... More
First floor
124.54
1436
178851.89
... More
Terace floor
5.6
1457
8159.2
... More
Ceramic tile/ Anti skid tile of 30cmX30cm/ 40cmX40cm special, plain/printed series over 25mm thick bed CM(1:1) (A/R 2006, Pg-89, item no-16)(Floor tile) Ground floor
123.86
1307
161897.41
... More
First floor
103.28
1336
138013.06
... More
Glazed ceramic tiles 20cmx30cm / 20cm x 20cm special plain /printed Wall tile series of premium grade 12mm thick bed CM(1:3) (A/R 2006, Pg-90, item no-17) Ground floor
218.22
1433
312905.66
... More
First floor
58.44
1520
88834.64
... More
First floor
93.57
1476
138109.32
... More
Supplying, fitting and fixing of Industrial vitrified tiles (30x30)cm in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T and P etc required for the work all complete as per direction of the Engineer-in-charge Ground floor
43.42
1046
45456.4
... More
Single leaf 2 hour rated Metal Fire door
Providing and fixing of insulated fire rated GI Sheet doors conforming to FD 120-I 30 classification of IS 3614 :2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 1.20 mm thick GI Sheet with minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accressesories like hardware, vision panel, fire and smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door and its fire rating.
The door must carry a 5years valid test evidence from CBRI-Roorkee / NTH-Kolkata/ NABL accrediated lab which operates in accordance with ISO/IEC 17025. The Door frame shall be single rebate grooved profile of size minimum 100mm x 57mm made out of 1.20mm (18gauge) minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembeled with bolting system. Frames to have inbuilt grooved to accomodate Intumuscent fire seal strip . The frame should also be provided with fire rated EPDM smoke seal 20x4 mm conforming to IS: 3614:2021 or as per test evidence. It shall be fixed in grooves, specifically cut in rebate on all the 3 sides of the frame.. All provisions should be mortised and provided with necessary inbuilt reinforcement to receieve appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves(Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note :- For grouting of Steel frames in masonary installations ;cement sand mixture 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item). Single leaf insulated fire rated door of FD 120 classification IS 3614:2021 with 120 minutes integrity and 30 minutes insulation - For staircase/exit pathway application / Refuge area. – Door frame fixed to exit opening with 10 nos. fasteners and door assembly must be provided with 1 no. single point panic bar and external trim with key cylinder, 1 no. door closer with spring. Every Glass pane must carry a permanent marking of its glass manufacturer as per directions of the Engineer-in- Charge. MAKE :- TATA PRAVESH,SHAKTI HORMAN or Equivalent ACADEMIC BLOCK
7.2
13600
97920
... More
Double leaf 2 hour rated metal fire door
Providing and fixing of insulated fire rated GI Sheet doors conforming to FD 120-I 30 classification of IS 3614 :2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 1.20 mm thick GI Sheet with minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accressesories like hardware, vision panel, fire and smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door and its fire rating. The door must carry a 5years valid test evidence from CBRI-Roorkee / NTH-Kolkata/ NABL accrediated lab which operates in accordance with ISO/IEC 17025. The Door frame shall be single rebate grooved profile of size minimum 100mm x 57mm made out of 1.20mm (18gauge) minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembeled with bolting system. Frames to have inbuilt grooved to accomodate Intumuscent fire seal strip . The frame should also be provided with fire rated EPDM smoke seal 20x4 mm conforming to IS: 3614:2021 or as per test evidence. It shall be fixed in grooves, specifically cut in rebate on all the 3 sides of the frame.. All provisions should be mortised and provided with necessary inbuilt reinforcement to receieve appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves(Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note :- For grouting of Steel frames in masonary installations ;cement sand mixture 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item).Double leaf insulated fire rated door of FD 120 classification IS 3614:2021 with 120 minutes integrity and 30 minutes insulation - For staircase/exit pathway application / Refuge area. - Door frame fixed to exit opening with 12 nos. fasteners and door assembly must be provided with 1 no. single point panic bar and external trim with key cylinder to active door shutter, 1 no. 2 point panic bar on inactive door leaf, 2 no. door closers with spring, 1 no. coordinator for sequencing.. Every Glass pane must carry a permanent marking of its glass manufacturer. (Make :- Tata Pravesh ACADEMIC BLOCK
7.2
16150
116280
... More
Providing and fixing of Hollow metal door at all levels from ISO 9001-2008 certified Manufacturer OEM . All hollow metal general purpose doors with or without vision panel. Pressed Galvanised steel Single /Double leaf of required sizes consisting of frame, shutter, infill and finish as detailed below and conforming to IS 277. All doors and frames should be finished with Thermosetting weather proof Powder Coating in desired RAL Shades. Approved manufacturer which should be ISO and CE Certified and IGBC registered company. Rate should include supply and installation of door and hardware set as mentioned in the door and hardware schedule. Door frame shall be Single rebate profile of size 100 x 50 mm made out of 1.20mm thick galvanised steel sheet (18 gauge). Frames should be butt jointed and field assembled with self tabs. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Door leaf should be 46mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 0.8mm (22 guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate Hardwares. The infill material shall be Rookwool insulation. All doors NSD 12044 should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be as per joinery details with a screw on glass beeding on the inside. The glass should be 5mm tk clear Float glass. Hardwares should include the following:
4 nos Hinges on each leaf
1 no Door closer on each leaf, sliding door bolt and 1 no Mortice Dead lock
1 Set D-type pull handle back to back on each leaf
1 no Concealed flush bolt in inactive leaf of Double door, if any
1 no vision glass on each leaf
Fastners as required.
The rate includes design supply, installation, testing, commissioning , transportation, T and P complete in all respect. MAKE :- TATA PRAVESH Ground floor
28.14
10650
299691
... More
Supplying fitting and fixing factory made 100 Percentage Solid WPC (Wood Polymer Composite ) - Door Frames. 100 mm x50 mm Single Rebated made from Wood Polymer Compqjte ( Single Extruded Process ) material 274.90/- comprising of virgin PVC polymer of K Value 57-60 ( Suspetsion Grade ), Calcium Carbonate and Per Run, Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk) and Nontoxic additives fabricated with meter Ft Joints after applying PVC solvent Cement and screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cm having good screw holding capacity ( Screw Withdrawal strength of ( Min. 990 N ). Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water / Moisture Proof and Fire retardant and Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length, , all as per specifications drawings as directed by the Engineer-In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company complete in all respect Make : Alstone, Century, RenyoarchGround floor
323.4
345
111573
... More
First floor
202.35
345
69810.75
... More
Supplying, Fitting and Fixing of Factory made Century, merino, Green new mika make 32mm thick I.S.I, marked post laminated flush doors with 1 mm thick laminate preseed on both sides of flush door.With fitting and fixing of Al-drop,hydraulic door clousure,SS Tower bolt with/without vision panel,SS Door stopper,SS T and P, Required for the work to be complete in all respectas per the direction of the Engineer-in-charge.hardware( Dorma/Godrej) Ground floor
138.7
8110
1124857
... More
First floor
86.68
8110
702974.8
... More
30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. (DSR 2021 , Code no: 9.122.1) Ground floor
48.84
3078
150357.36
... More
First floor
37.81
3078
116400.73
... More
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. Ground floor
153.45
601
92304.78
... More
First floor
118.8
601
71461.76
... More
Providing and fixing of Wooden fire cum accoustic doors with 32db as per BS:476 Part- 20 and 22 and IS 3614 part-1 and part-2 for stability , integrity and thermal insulation. 03 Criteria Wooden door confirming to IS 277 with the following specification. Recommended fire door shall have doors tested earlier at CBRI for maximum rating of 2hrs tested with or without vision panel. Individual Test certificates should be available for glass used in vision lites confirming the required fire ratings. Any deviation in specification other than what is mentioned in the test certificates are not allowed. Approved manufacturer Navair International Pvt Ltd or equivalent subject to architect’s approval and manufacturer should be ISO and CE Certified and IGBC registered company. Rate should include supply and installation of door and hardware set as mentioned in the door and hardware schedule. Door leaf shall be 83mm thick (75 mm thick with commercial ply + 4mm thick veneer on both side ) fully flush door with or without vision lite. 83mm thick shutter, comprising of 140mm x 90mm hardwood internal timber frame work, with infill of fire resistant and accoustic wool insulation of 48 Kg/m3 density coated with VIPER FRS 881 LH coating on both sides for insulation. The coated insulation shall be sandwiched between HILUX / PAMTECH Non Combustible (Calcium Silicate) Board on both sides (edge to edge on internal Hard wood frame and cladded with 6mm thick commercial ply on both sides, with exposed teak wood beading. 20 x4mm fire and smoke intumescent seal shall be used for shutter and frame . The Frame shall be 140 x 90mm of Hard Wood (Red MIrandi) and coated with VIPER Fire reatrdent Primer. The rebate shall be of 20mm x 79mm in Door Frame to accommodate the shutter in frame. In all doors, the pasting of the ply and 4mm thick veneer on both side should be done using automatic machine and should be free from any nails or perforations. Following hardwares are to be provided in Fire cum Acoustic door:
8 nos SS Ball Bearing Hinges of size 100 x 89 x 3 mm
2 nos heavy dute door closer TS73V/TS89F
1 no complete set Panic bar (PHCR 1000 + 1500) for double leaf door along with Panic Trim from opposite side (PHT 2905 with 42mm half cylinder)
RAVEN Delta Seal RP-120 (for perimeter of frame)
RAVEN Astragal Seal RP-16si (for perimeter of shutter)
RAVEN Door bottom Seal RP-8si
HRD Fasteners M10 x 160mm. The cost includes all materials, labour, conveyance, scaffolding, T and P etc complete in all respect as per direction of EIC. ACADEMIC BLOCK
8.4
46865
393666
... More
Providing and Fixing Fabric Paneling as per manufcturers specification The panel comprise of 12mm thick recron acoustical synth.The top will be covered with fabric of approved make and shade fixed and stretched with PVC edge grippers,all complete as per design,drawing and direction of EIC.The cost includes all materials, labour, conveyance, scaffolding, T and P etc complete in all respect as per direction of EIC. ACADEMIC BLOCK
8.4
2029
17043.68
... More
Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures Make:- NCL Zyolx, Saint gobain, fenesta Ground floor
142.54
4960
707136.66
... More
First floor
116.41
4960
577506.52
... More
Providing and fixing Colour coated galvanized steel louvers of Jindal /NCL Seccolor / TATA Pravesh make With Fixed windows made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paintof 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 33 x 57 mm Box Section for mullion 33 x 57 mm, and section for beading should be 12 x 25 mm with 4 mm pinhead glass for ventilators with Ethyl propylene Damien monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of selfexpanding screws complete for finished item of work. Fixed louvers 4'-0" x 2'-0" (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 57 mm Mullion section size of 33 x 57 mm Ground floor
10.8
5115
55242
... More
First floor
8.28
5115
42352.2
... More
Supply and Installation of high Density wall panelling with 20 mm thick mat solo micro fibre pine wood magnesite bonded wood particle panels of size 1200mm X 600 mm X 15mm having Density-600 kg/mt cube , weight - 9 kg /sq mt, NRC- 0.9, Fire Class - 1 and P and Thermal Heat Resistance - 0.1 W/mK Climate ( degree Centigrade , RH - 50-95 , Green VoC , RC Percentage - Low and 30 climate from ambient to saturation, Moisture Movement - 0.02 Percentage are to be fixed with strut MC38 channel 0.90mm x 3600mm to be fixed directly on the surface of the wall with 50mm/10mm SS crew and PVC grip horizontally / Vertically as per the site requirement. The square edged mat solo panels is to be screwed with 38 mm phosphorus coated self threded screw with edge matching. These acoustic panels can be spray painted of choice colour. Test certificate of the used products shall be submitted after procurement of materials. Make:- Aeroceil ACADEMIC BLOCK
73.94
4275
316093.5
... More
WALL PANELING WITH WOODEN SLAT HDF PLANK (FIRE RESISTANCE) Supply and installation of wall paneling of wooden slats (2440 mm x 128 mm x 15 mm thick) surco high density fiberboard made out of pure pinewood particles , Fire Resistance - (Class 1 )Pink in colour core with 5 test Fire Resistance BS 476 part 5 , BS 476 part 6 , BS 476 part 7 ISO 1182. ASTM E662 Smoke Density - laminated finish, perforated wooden grooved HDF slats L16-2 (2 mm grooves @ 8 mm centers),tongue-groove edge for a seamless look of lineal dimension size (2440 mm x 128 mm x 15 mm thick) having density 700 Kg /m3, weight -9 Kgs/m2 with back fleecs from soundtex Germany nonwoven acoustic to be pasted on slats surco is to be installed by using GI strut system. The technical parameters are as follows Core Variants - Fiberboard, Climate (OC RH) – 50, 70 Light reflectance – 75 Percentage ,Green (RC Percentage ) – 25, Hygiene (VoC, Clean room) – Low, Class 1,Strength, Load capacity (Kg) - Anti sag, Ball-Impact. The wall paneling system shall include GI Wall channel (CC22) having thickness 0.45mm, length 3600mm, unequal flanges of 15 and 20mm and web of 22mm should be fixed on the wall with nylon sleeves and suitable fasteners at every 300mm centers, in the direction perpendicular to each other at every 600mm centers upto the desired height. Synth poly fiber PF 5 x 50 wool of 500 gsm to be filled between the horizontal and vertical studs as in filler with the help of wire / stick 7 adhesive. The framework will maintain 38 mm gap from the walls. Now clad the wooden slats surco on the CC 18 with the help of center and edge clips to get better locking of slats. The tongue and groove are to be properly aligned to get flush look . Test certificate of the use products shall be submitted after procurement of materials. Make:- Aeroceil ACADEMIC BLOCK
34.9
4480
156352
... More
SITC of Acoustic wall panelling of soak plane having NRC 0.71, fire class 1 and P, density400kg/cum, Green VoC low, RC Percentage low, Climate 0 degreee centigrade of size 1200mmX600mmX20mm to be fixed horizontally on CC25 GI channel/ aluminium channel of 50mmX25mm which area to be fixed vertically up to the appropriate height in three lines in the centre portion of the pillar at 300mm centre to centre leaving 0.45m on both side up to full height. The channel will be screw fixed with 50X10 PVC wall grip and 50X10 ND screw. The H-spline system is horizontally fixed on the CC25/aluminium channel by 25mm driver screw. The soak plane panel will be slutted-in to the H-spline system groove and pressed till the spline edge goes fully into the the panel. Then one more H-spline channel of1200mm of length to be pushed on the upper side of the panel and screwed properly, so likewise the installation of panels goes up. The cost includes all materials, labour, conveyance, scaffolding, T and P etc complete in all respect as per direction of EIC. Make:- Aeroceil ACADEMIC BLOCK
34.9
5075
177141.23
... More
Supply and Installation of false ceiling 8 mm thick Aeroloc magnesium oxide HDFR boards of size 1200 x 2400 mm having Density-1000 kg/mt cube, with STC- 34 – 50, weight - 8.5 kg /sq mt, Fire Class - 1 and P and Thermal Heat Resistance - 0.11792 W/mK Climate ( degree Centigrade , RH - 50-95 , Green VoC , RC Percentage - Low and 30 Water resistant with wet expansion less than -0.02 Percentage from ambient to saturation, Moisture Movement - 0.02 Percentage from Aeroceil are to be fixed with Philips head screw is fixed by using concealed ceiling system. The concealed ceiling system shall include GI Wall channel(WC 25) having thickness 0.45 mm, length 3600 mm, unequal flanges of 15 and 20 mm and web of 22 mm should be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300 mm centers. Then suspend Main channels(MC 45) having thickness 0.9 mm, length 3600 mm, equal flanges of 15 mm and web 45mm from the soffit at every 1200 mm centers with Suspender angle(SA 25) having thickness 0.45 mm, unequal flanges of 25 and 10 mm. GI Cross channel(CC 25) having thickness 0.45 mm, length 3600 mm, knurled web 35mm, depth of 25 mm and equal flanges 9.5 mm is fastened to the Main channel in the direction perpendicular to the Main Channel at every 600mm centers. Now the jointing and finishing of the same will be done by using Aeroceil jointing kit consist of powder mixed with water and apply the same with flat flap on the boards joints to finish the surface of the boards so as to look flush. Apply synthetic poly fiber PF 5 x 50 acoustic wool of 50 kg density to be kept on the top of the ceiling by laying on the framework. Test certificate of the use products shall be submitted after procurement of materials. Make :- AeroceilACADEMIC BLOCK
190.82
5649
1077942.18
... More
Providing and laying in position 18 mm thick homogeneous hardwood flooring of Aeroceil American walnut plank or Equivalent of size 18mm x 127mm x 305-1500 mm with tongue and groove joints to secure long lasting joint. The Floor is finished on top with seven course of UV curved formaldehyde free lacquer. The planks are installed on 2 mm foam and 12 mm waterproof ply nail down and using adhesive in the groove of the board all complete including all accessories (Skirting, Profile) etc. all complete including cost, Conveyance, royalty, taxes of all materials, labour T and P etc, complete as per direction of Engineer-in-charge.Make:- AeroceilACADEMIC BLOCK
280.5
8880
2490840
... More
Providing and fixing of wooden skirting by using the plank of size 16mm x 60mm x 2000RL with the help of headless nail all all complete including all accessories (Skirting, Profile) etc. all complete including cost, Conveyance, royalty, taxes of all materials, labour T and P etc, complete as per direction of Engineer-in-charge.The cost includes all materials, labour, conveyance, scaffolding, T and P etc complete in all respect as per direction of EIC.Make:- AeroceilACADEMIC BLOCK
22.72
656
14908.18
... More
CEILING WITH AEROSQUIRE on GRID SYSTEM
Supply and Installation of Aeroceil false ceiling 12 mm gypsum perforated square edge 10/20 ( 10 mm square perforated 20 mm pitch TOA - 15 Percentage ) gypsum tiles having the technical parameters are as follows : Core - GFR gypsum, Fire – Class A and P, Acoustics – NRC 0.80,Climate (degree C RH) – 50, 90, Light reflectance 80 Percentage ,Green (RC Percentage ) – 25, Hygiene (VoC, Clean room) – Low , having pixel size 10X10 mm square perforated at 20 mm center tile of size 595 x 595 x 12.5 mm having density 700 Kgs/ m3, weight - 8 kg/m2 . The concealed ceiling system shall include GI Wall channel(WC 25) having thickness 0.45 mm, length 3600 mm, unequal flanges of 15 and 20 mm and web of 22 mm should be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300 mm centers. Then suspend Main channels(MC 45) having thickness 0.9 mm, length 3600 mm, equal flanges of 15 mm and web 45mm from the soffit at every 1200 mm centers with Suspender angle(SA 25) having thickness 0.45 mm, unequal flanges of 25 and 10 mm. GI Cross channel(CC 25) having thickness 0.45 mm, length 3600 mm, knurled web 35mm, depth of 25 mm and equal flanges 9.5 mm is fastened to the Main channel in the direction perpendicular to the Main Channel at every 600mm centers. Now the jointing and finishing of the same will be done by using jointing kit consist of powder mixed with water and apply the same with flat flap on the boards joints to finish the surface of the boards so as to look flush. Apply synthetic poly fiber PF 5 x 50 acoustic wool of 50 kg density to be kept on the top of the ceiling by laying on the framework. Test certificate of the use products shall be submitted after procurement of materials. The cost includes all materials, labour, conveyance, scaffolding, T and P etc complete in all respect as per direction of EIC. Make:- Aeroceiltotal
64.5
2987
192661.5
... More
AUDITORIUM BACK WALL PANELLING WITH MAT EBONY
Supply and Installation of Aeroceil Acoustic wall panelling with 15 mm thick Matt Ebony micro fibre pine wood magnesite bonded wood square edge of black colour of size 1200 x 600 mm with having Density-600 kg/mt cube , weight - 9 kg /sq mt, Fire Class - 1 and P, NRC - 0.9 and Thermal Heat Resistance - 0.1 W/mK Climate ( degree Centigrade , RH - 50-95 , Green VoC , RC Percentage - Low and 30 climate from ambient to saturation, Moisture Movement - 0.02 Percentage are to be fixed on GI channel WC25 of 3600mm (Length) X 0.45mm (Thick) which will be fixed on the wall either vertically or horizontally depending on the site condition at 300mm C/C. The GI Channel CC 25 will be fixed on wall with 50 mm x 10mm MS screw with suitable PVC Nylon grip. Finally the Matt Ebony panels of size 1200 x 600 mm x 15mm will be fixed on the channels with 25mm phosphorus dry wall screws etc all complete as per direction of EIC. Test certificate of the use products shall be submitted after procurement of materials.The cost includes all materials, labour, conveyance, scaffolding, T and P etc complete in all respect as per direction of EIC. Make:- Aeroceil total
87.35
3560
310966
... More
Supply and installation of Aeroceil Stretchable acoustical fabric hush Grafix fabric system by using Aeroceil FR Grade hush Grafix fabric of size 1400 mm width, shall be stretched by using wooden base 10 mm thick rigid vinyl stretch tracks half wrap/ full wrap 15 mm FS15 and mid seam 15 mm FS 15, 20 mm pinewood magnesia bonded Strand board, Synthetic poly fiber 5x50 infill with requisite accessories and tools. Pinewood wood based wool fiber having 15 mm thick square edge is first installed on the wall along the marking lines with metal fasteners inserted at 300 mm centers FS 15 tracks to be installed on wooden base after applying stick S7 adhesive on both surfaces for a true and continuous secure grip, and heavy - duty fasteners at 150 mm centers on both sides of stretch tracks. Pinewood wool panels having square edge Magnesite bonded pinewood fibers panels of size 600 x 1200 x20 mm having density 400 Kg /m3 , weight 4 kg which is fixed to GI Channel CC25 on walls placed at 600 mm centers vertically / Horizontally with suitable fasteners with MC 45 at 1200 c/c and WC 25 is for supporting the main frame. . Synthetic poly fiber PF 5 x 50 mm thick adhered on strand tracks by following the fabric thread line or pattern. The fabric Hush Grafix is stretched and tucked into the stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note - minimum 50 mm additional Anuton fabric is required for tucking hence maximum module wall fabric width would be 1600 mm The technical parameters of the system are core - pinewood fibre and polyfiber Fire - 1 and P Acoustic - NRC 0.85 Climate OCRH - 49, 90 Termite resistance - yes , light reflectance - colour dependant , Green RC Percentage - 25 , Hygiene ( Voc , Clean room ) - Low , Class 1. Test certificate will be submitted after procurement of materials. Make:- Aeroceil Total
309.86
7280
2255780.8
... More
Providing and fixing in position 50mm, thick precast cement concere jally (1:2:4) hard granite chips including roughening, cleaning, fixing and finishing in cement mortar (1:3) etc., complete.(sor 2022 25.1 .2) Ground floor
11.3
424
4797.87
... More
First floor
13.86
424
5884.82
... More
Terace floor
15.32
424
6504.72
... More
2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size HG chips including all cost, conveyance, royalty and taxes etc.comp.to work site for new work as per the specification approved by the department and direction of E.I.C CANTEEN
0.98
387
379.26
... More
ACADEMIC BLOCK
172.56
425
73476.05
... More
ACADEMIC BLOCK (Head Room)
7.71
470
3627.56
... More
BOYS HOSTEL
38.18
387
14775.66
... More
BOYS HOSTEL
3.1
425
1319.98
... More
GIRLS HOSTEL
38.18
387
14775.66
... More
GIRLS HOSTEL
3.1
425
1319.98
... More
SINGLE QUARTER
13.53
387
5236.11
... More
SINGLE QUARTER
3.41
425
1451.98
... More
FAMILY QUARTER
18.3
387
7082.1
... More
FAMILY QUARTER
3.02
425
1285.92
... More
Supplying and Fixing of M.S. Window Grill made out of M.S Flat conforming to IS 2062/2006 painted with Red Oxide Primer as per the design approve by E.I.C including cost,conveyance of all materials,priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge Ground floor
6318.9
63
398090.7
... More
First floor
4899.15
63
308646.45
... More
Terace floor
492.75
63
31043.25
... More
Painting two coat with approved synthetic enamel paint to new wood and iron work including cost, conveyances, royalties of all materials and cost of all labour with T and P required for the work etc. complete as per specification and direction of Engineer in charge. Ground floor
105.33
260
27459.53
... More
First floor
81.67
265
21675.22
... More
Terace floor
8.21
270
2218.34
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, cost of all labour,labour cess, T and P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. Ground floor
1759.88
328
577944.59
... More
First floor
584.87
328
192071.31
... More
Terace floor
309.17
328
101531.43
... More
Desgining, fabricating, supplying and installing in position in solid and metallic color of approved shade made out of 4mm thick aluminum composite panel material consisting of 3mm thick FR grade mineral core sandwich between 2 aluminum coil of alloy-AL3105-H16/H24 OF 0.5mm thickness making overall thickness of 4 mm. The aluminum composite panel cladding sheet shall be coil coated with Kynar 500 based PVDF/lumiflon (FEVE) based Coating (thickness 25 micron) and service coating on the reverse side shall be with PU (Thickness 5-7micron) base and coating shall be confirm to AAMA2605 standard with 10-yrs warranty done on a color coating line located in India Make:- Viva/Alucobond/alpolicACADEMIC BLOCK
16.5
3552
58608
... More
ELECTRICAL ACADEMIC BLOCK INTERNAL Sub-Head I (modular Wiring Items) Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (Europa) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (Europa) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials. GROUP-A
50
497
24870.5
... More
GROUP-B
50
790
39501.5
... More
GROUP-C
60
1161
69697.2
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch and socket (modular type)( ( flame retradant type)) and other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (Europa) .(Maximum 02 nos point in one circuit).All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
38
196
7448
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch and socket(modular type)( ( flame retradant type)) with suitable size modular box and cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius ) /Panasonic (Europa) .(Maximum 02 nos point in one circuit).All the switches and sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
26
496
12896.52
... More
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch and socket(modular type)(( flame retradant type)) with suitable size modular box and cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (Europa) (For equipement power)All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
20
667
13340.8
... More
Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch and socket(modular type) ( ( flame retradant type) with suitable size modular box and metallic cover plate (both side)( flame retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius )/Panasonic (Europa) (For equipement power)(Maximum 02 nos point in one circuit).All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
12
1224
14688
... More
Supplying,fixing of 3x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+3 nos 6A switch and socket(modular type) ( ( flame retradant type) with suitable size modular box and metallic cover plate (both side)( flame retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider (Zencelo)/ legrand( ( Myrius)) /Panasonic (Europa) (For equipement power). (Maximum 02 nos point in one circuit).All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials.
6
1996
11976
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
300
156
47013
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)
575
170
98135.25
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)
543.9
188
102274.96
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5)
220
219
48208.6
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit.(LFDB TO LBDB/Medical equipement) (4X6+2X4)
162
316
51279.48
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)
145
443
64349.55
... More
Supplying and installation of 25A AC starter Modular type, Schneider/Siemens/Legrand/Panasonic coil voltage-230 Volt A.C. on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
9
626
5634
... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover.Make- Havells/Anchor , A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
2
213
426
... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
12
74
895.44
... More
S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (Europa)
80
374
29920
... More
Sub-Head II (Light fitting Fixture and Fan) Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj / Anchor ) of exhaust fan in the existing wall, including fixing and conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
8
3409
27276
... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers(Make- Havells/Crompton/Usha/Orient/Bajaj/Anchor ) of exhaust fan in the existing wall, including fixing and conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
2
3873
7746
... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery greater than equal to215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix / Anchor(Penta Power Star) ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years..
150
4587
688122
... More
Supplying and fixing of Energy efficient Recess /Surface mounted square/round shaped LED luminaire made up of CRCA powder coated sheet steel of 36W (595X595X70MM)and system lumens output not less than 4680 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10 Percentage ,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 5 years.
30
5612
168360
... More
Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10 Percentage , with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years
160
1540
246400
... More
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years .
120
723
86866.8
... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years
10
736
7360
... More
Supply and fixing of 10 Watt LED BH Fitting (panasonic/havells/LT/Bajaj/Phillips/Crompton/Wipro/Halonix/Orient.)
6
1020
6120
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
100
39
3900
... More
BDBS,DB,AC DB,FLOOR PANELS,MCBS Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO) as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years. 4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar and Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years
8
2223
17786.64
... More
Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years
4
1961
7845.72
... More
2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)Warranty on DB is 3 years
4
929
3717.08
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO). the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
40
321
12840
... More
Supplying and fixing 40 Amps rating, C series,10KA breaking capacity,4P, 415 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
4
2966
11864
... More
Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 4P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The MCB should be Replacement Warranty will be 3 years.
4
5239
20956
... More
Supplying and fixing 6-32Amps rating,C series,10KA breaking capacity, DP 240 volts, MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
4
963
3852
... More
Supplying and fixing 40Amps rating,C series,10KA breaking capacity, DP 240 volts, MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
2
1525
3050
... More
Supplying and fixing 40Amps 2P 240 volts RCCB 30 mA Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The MCB should be Replacement Warranty will be 3 years.
1
4581
4581
... More
Supplying and fixing 63Amps rating,C series,10KA breaking capacity, 4P 415 volts MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The MCB should be Replacement Warranty will be 3 years.
4
2966
11864
... More
Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The MCB should be Replacement Warranty will be 3 years.
4
5239
20956
... More
(Earthing) INSTALLATION S/IT/C of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts and washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil and rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 2 years
2
2559
5118.22
... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
211
108
22965.24
... More
Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
44
77
3419.24
... More
CABLING AND END TERMINATION MAIN AREA Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI of following size cables as per direction of Engg.-in-Charge. Ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials4core x 16 sq mm
24
305
7320
... More
4 core x 6 sq mm (for small power)
24
211
5064
... More
3.5core x 50 sq mm
58
573
33234
... More
3.5core x 95 sq mm ,2 RUNS
68
971
66028
... More
LAYING OF CABLE Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
32
154
4933.76
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
120
175
21010.8
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
5
56
280
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
10
77
770
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge.
63
45
2835
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
24
61
1464
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
12
102
1234.2
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
12
157
1890.36
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. 4 core x16sq mm
6
230
1380
... More
3.5 core x50 sq mm
2
413
826.16
... More
3.5 core x95 sq mm
2
471
942.7
... More
Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 50 mm dia
8
447
3576
... More
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 200 mm dia
10
866
8660
... More
PANELS MAIN CONTROL PANEL AT GF S/I/T and Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted and painted by siemens gray powder cote paint fallowed by 9 tank acid treatment is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel and accessories must be 3 years and compelete test certificate must be submitted along with panel board including component list.Separate Aluminium Earth bus bar should be installed.
1
174695
174695
... More
In commer-1-01 number of 1604P Icu=100 Percentage Ics,36Ka LSIG MCCB with micro processor based release Electrical locking for normal and DG ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS In commer-2-01 number of 160A 4P Icu=100 Percentage Ics,36kA LSIG MCCB with micro processor based release Electrical locking for normal and DG ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS) In commer-2- 01 no of 125A 4P onload changeover switch (Make-HPL/L and T/Siemens/Schneider) Busbar-1 and 2 04 numbers of 200Amps copper busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve and supported by suitable size DMC insulator. (for outgoing) Out going- 6 numbers of 32A 4P MCB,10kA breaking capacity, C Series (make- Legrand-DX3/Schneider-Acti 9/Siemens-Betaguard/ Anchor(UNO)) Out going- 6 numbers of 63A 4P MCB10kA breaking capacity, C Series (make- Legrand-DX3/Schneider-Acti 9/Siemens-Betaguard/ Anchor(UNO)) Out going- 6 numbers of 63A DP MCB10kA breaking capacity, C Series (make- Legrand-DX3/Schneider-Acti 9/Siemens-Betaguard/ Anchor(UNO)) Out going- 02 numbers of 63A 4P MCCB,25Ka MCCB with TMR based release with adjustable overload ,Icu=100 Percentage Ics( Make-LEGRAND-DPX3 / Siemens-3VM Model/ Schneider- NSX) Instrument- (i) 06 numbers phase indicating lamp with toggle switch and HRC fuse. (ii) 02 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication with RS 485 COMPACTIVITY FOR bms data.1 no. 3P+N 12.5kA/POLE SPDwith 63A 4P MCB(TYPE-I)(make- Legrand/Schneider/Siemens) UPS SYSTEM(For COMMON AREA) Supply ,installation ,testing and commissioning of 10KVA/10kW UPS SYSTEM WITH IGBT based inverter system, true online double conversion system, inbuilt isolation transformer and automatic phase sequence corrector of 3ph in put to 3 ph output,415V, with built in BMS with battery back up up to 30 minutes with MS Rack for battery Housing, DC cable 7 Mtr with SFU and links for installation (Battery required: 12V, 42AH, 20 No.s) protection for fault by OL,UV,EF,GF,OC,Ph. (Make: Numeric/RELLIO/ Vertiv) as per direction of Engg.-in-Charge. Warrentee period of all accessories and component and system must be 2 years and compelete test certificate must be submitted along with ups including component list and SLD. CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWERSupplying,fixing of perforated cable trays with horizental and vertical bends,reducers ,tees,crossover,brakets and other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 200mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
21
605
12705
... More
Supplying and fixing of perforated cable trays with horizental and vertical bends,reducers ,tees,crossover,brakets and other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 300mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
14
689
9657.62
... More
Supply and fixing of perforated cable trays with horizental vertical bends,reducers ,tees,crossover,brakets other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 400mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
12
913
10957.92
... More
Supply, Installation of FLOOR RACE WAY WITH JUNCTION box GALVANIZED(GC) type AS PER EN-ISO-1461 , with internal dimensions of size 38mm(H) x 225mm(W), of Profab/ OBO/ Neidax .(With all accessories,bend, cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge.(3 COMPARTMENT TOTAL 54 MM HEIGHT.
15
1781
26715.6
... More
DATA and TELEPHONE SYSTEM Data Networking System:-Supply and laying of 4 pair Cat6 U/UTP Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20degree to +70degreeC Cable support Conductor Resistance Less than equal to 9.38 ohm/100m Max., Cable support Delay Skew: less than 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 ohm @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Tyco / Legrand / Panduit
200
62
12400
... More
Supply, Installation of Cat6 I/O with Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel,. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94-V-O certified. Make: Tyco / Legrand / Panduit I/O Single
8
416
3328
... More
Supply, Installation of of Cat 6, 24-port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make: Tyco / Legrand / Panduit
1
9176
9176
... More
Supply and installation of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50Micro’’ Gold Plated Contacts , 100 Percentage Factory Tested , Transparent Boot Cable Assemblies. Make: Tyco / Legrand / Panduit 1mtr Lenghth
6
326
1956
... More
Supply and laying of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173-1:2002 / IEC 60794-1/IEC 60793-2-50 class B1.3 / EN 60793-2-50: class B1.3 / ITU Recommendation G.652.D - the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 - 2002 incl. 802.3ae ) Jacket. Make: Tyco / Legrand / Digisol
144
111
15984
... More
Supply, Installation,Testing and Commisioning of 6Port Rack Mount Loaded LIU including SM SC Adaptor and Pigtail. Make: Legrand/Systimax/Panduit
1
8002
8002
... More
Supply and installation of OFC PATCHCORD, SM (OS2), DUPLEX LC-SC, PC TYPE, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : less than= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PCgreater than= 45db, UPCgreater than=50db, APCgreater than=60db. Make: Tyco / Legrand / Digisol
2
1554
3108
... More
SITC of 9U 600/1000D UL Listed Floor mount Rack with Front glass door with Cam lock, Rear mesh door with Cam lock and 3inch Castor Wheel included with 2 no 6/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with Plastic cable loops, 2nos CFM FAN set, 1no Monitor Tray - Ventilation - 495W - 375D and H/W screw920sets). Make: Valrack/Rittal/ APW
1
8177
8177
... More
Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate and cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
2
382
764
... More
Supplying and fixing of clip in type modular T.V. antenna socket ISI marked on mounted on G.I modular box with face plate and cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.
2
392
784
... More
Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.
100
45
4500
... More
Recessed wiring to television point with cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in in existing surface / recessed PVC conduit as required as per direction of Engineer in Charge.
122
42
5124
... More
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
( Tel junction Box)
3
180
540
... More
Supplying and Commissioning of Telephone Hand Set.
3
734
2202
... More
Supplying and installation of 50 pair KRONE make moudles with locking and key arrangements fabricated with MS sheet and powder coated to be fixed on concealed manner incl. good the damages.
1
2500
2500
... More
FIRE FIGHTING EXTINGUISHER SYSTEM Supply,Installation,Testing and Commisioning of ISI marked (IS:2878) Fire Extinguisher ,Carbon di-oxide type capacity 4.5kg with all accessories (Ever safe/Fire shield/Ceasefire/Safex)
6
7700
46200
... More
Supply,Installation,Testing and Commisioning of ISI marked (IS:2878) Fire Extinguisher ,ABC type capacity 6kg with all accessories (Ever safe/Fire shield/Ceasefire/Safex)
2
3264
6528
... More
Fire buckets (FILLED WITH SAND) round bottom type enamel painted, white inside and Red out side and Letter "FIRE" in black out side and handle with mounting bracket.
2
4238
8476
... More
SIGNAGES Floor identification signage (i.e, GROUND FLOOR… ETC.,) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5cm with contrasting colour from back ground. Size shall be 15cm *60cm. Make-Bajaj/Prolite
2
1250
2500
... More
Fire Exit signage at each stair on every floor, indicating the direction of fire exit, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 45cm.Make-Bajaj/Prolite
2
760
1520
... More
Providing and fixing in position the signage of " Fire Extinguisher " to be fixed above the every extinguisher. Size 6" x 8"Make-Bajaj/Prolite
2
760
1520
... More
LIGHTING SYSTEM Supplying, Erection, Fixing, connection and testing of LED BOUNDRY WALL Light of elegant look (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) 35 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more , LED street light model having warrantied for a period of 5 years . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge.
6
3220
19324.92
... More
Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials
234
109
25506
... More
LIGHTENING PROTECION SYSTEM Lightning Protection :- Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn
59
149
8791
... More
Supply of Roof conductor holder for parapet- Polyamide Conductor holder:With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn
42
51
2142
... More
Supply of Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn
12
199
2388
... More
Supply of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Tested as per IEC 62561.(2nos/expansion piece ).Make-OBO/Dehn
10
203
2030
... More
Supply of 1 mtr vertical air terminal with mounting accessories on the flat surface to meet the requirements of IS/IEC 62305. Tested for Electrical , mechanical and chemical as per IEC 62561. Tested for 100kA lightning current. Make-OBO/Dehn
4
1164
4656
... More
Supply of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size10/16 mm aluminium rod: 3 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. Tested as per IEC 62561. Make-OBO/Dehn
2
4049
8098
... More
Supply for Providing of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete and clamp tested upto 100KA lightning current . Make-OBO/Dehn
4
2460
9840
... More
Supply for Providing of Stand for Fang Fix system 16 kg made up of frost resistant concrete. Make-OBO/Dehn
10
954
9540
... More
Supply of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer. Tested for 100kA lightning current. Make-OBO/Dehn
8
380
3040
... More
Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height For Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn
8
277
2216
... More
Supply of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor Hot Dipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn
12
270
3240
... More
Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn
12
252
3024
... More
Supply of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from hot-dip galvanised steel, Bottom section from polyamide, black. Tested as per IEC 62561. Make-OBO/Dehn
4
261
1044
... More
Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn
4
879
3516
... More
Supply of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 17.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 Make-OBO/Dehn
2
4183
8366
... More
Supply of universal clamp made of SS to connect rod with flat conductor Make-OBO/Dehn
2
887
1774
... More
Supply of Earth conductivity enhancing mineral compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn
2
2838
5676
... More
Supply of The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system Make-OBO/Dehn
1
2169
2169
... More
Installation of The above arrangements including all accessories as per Direction of Engg. In charge.
1
12000
12000
... More
1R QUARTER Sub-Head I (modular Wiring Items) Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor (Make-Havells/Polycab/Finolex/RR Kable/Anchor ) of ISI marked with 20 mm dia PVC heavy class FRLS non metallic conduit(Make-AKG/Polycab/precision/norpack/sudhakar/Anchor) with 6A modular type switch(Make-Legrand(Myrius),Schneider(Zencelo),Panasonic(Europa) ) ISI marked , and ceiling rose ISI marked of modular type G.I box with cover , of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection .Raw power supply switch board shall be separate from emergency power supply switchboard as per direction of Engineer -in -Charge.Each light point should have proEuropa for ceiling rose and angle holder point. GROUP-A(QTRS)
14
497
6963.74
... More
GROUP-B(QTRS)
6
790
4740.18
... More
GROUP-C(COMMON ARAE)
6
1161
6969.72
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch and socket (modular type)(Make-Legrand(Myrius),Schneider(Zencelo),Panasonic(Europa) and other required accessories of ISI marked as approved as per direction of Engg. -in -Charge.
24
196
4704
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch and socket(modular type)(Make-Legrand(Myrius),Schneider(Zencelo),Panasonic(Europa) with suitable size modular box and cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.
26
496
12896.52
... More
Supplying,fixing of 16A Plug on the separate board with complete fitting by 01 no of 6A switch and socket(modular type) (Make-Legrand(Myrius),Schneider(Zencelo),Panasonic(Europa) with suitable size modular box and cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.
5
667
3335.2
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor FRLS, single core cable (Make-Havells/Polycab/Finolex/RR Kable/Anchor or equievalant) in recessed PVC conduit HEAVY duty (Make-AKG/Polycab/precision/norpack/sudhakar/Anchor) of mentioned size as approved) as required as per direction of Engg.-in-Charge.. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic FRLS heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
200
156
31342
... More
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic FRLS heavy duty PVC conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)
200
170
34134
... More
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic FRLS heavy duty PVC conduit . (2X4+1X1.5)
100
188
18804
... More
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic FRLS heavy duty PVC conduit .(PANEL TO BDB EACH QTR) (2X6+1X2.5)
120
219
26295.6
... More
Supplying and fixing of following sizes of heavy class FRLS PVC conduit (Make-AKG/Polycab/precision/norpack/sudhakar/Anchor) along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .(For TV/Internet cable /Fire detection only) 20 MM
40
124
4960
... More
Supplying and installation of 25A AC starter Modular type or any other equivalent reputed make as approved coil voltage-415 Volt A.C. and O/L range of suitable range range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .(Make-Legrand/Schneider/ Havells/Hagar/ABB/C and S /Panasonic)
9
626
5634
... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover. as required as per direction of Engg.-in-Charge. (Make-Legrand(Myrius),Schneider(Zencelo),Panasonic(Europa)
2
213
426
... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .
4
74
298.48
... More
S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (Europa)
18
374
6732
... More
Sub-Head II (Light fitting Fixture and Fan) Supplying, installation, of exhaust fan of heavy duty 300 mm sweep with louvers any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing and conntection as required as per direction of Engg.-in-Charge. Make-Havells/Bajaj/Usha/Crompton
11
3409
37504.5
... More
Supplying, installation, testing and commssioning of 1200 mm sweep BLDC ceiling fan with aluminium blades having wattage not more than 28W and Air delivery greater than equal to 215(m3/min) Make-USHA(Teohnix)/Crompton(Energion Groove)/Havells(Efficiencia Neo ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .
18
4587
82574.64
... More
SITC of energy efficient LED tube light fittings with decorative alumunium LED batten along with LED tube light having power rating 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser i/c connection etc as required. panasonic/havells/LT/Bajaj/Phillips/Crompton/Wipro
27
723
19545.03
... More
SITC of Sleek LED 10 watt mirror light fitting with decorative aluminium LED batten having extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
panasonic/havells/LT/Bajaj/Phillips/Crompton/Wipro
2
736
1472
... More
SITC of Sleek LED 9 watt LED Lamp complete with all accessories etc. directly on angle holder as required.
panasonic/havells/LT/Bajaj/Phillips/Crompton/Wipro/Halonix/Orient
2
110
220
... More
Supply and fixing of 10 Watt LED BH Fitting (panasonic/havells/LT/Bajaj/Phillips/Crompton/Wipro)
2
1020
2040
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
8
33
264
... More
Supplying, Erection, Fixing, connection and testing of LED street light with moveableG.I bracket and G.I Flat clamp ,90 W LED having die cast aluminium housing with toughened glass having lumen efficacy of 120 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 66 protection or more , LED street light .make-wipro/philips/Havells/Bajaj/panasonic . The luminaire should be supplied along with bracket maintenance free for inspection as required,wired by 1.5 sq. mm FRLS wire /cable along with earth wire as per direction of Engg.-in-Charge.
1
8157
8157
... More
Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10 Percentage , with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 5 years
61
1540
93940
... More
BDBS,DB,AC DB,FLOOR PANELS,MCBS Supplying and fixing of following mentioned way, three pole/single pole and neutral, 1.6 mm thickness sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. , or any other equivallent A catagories reputed make ISI marked as approved as per direction of Engg.-in-Charge. make-Legrand-Ekinox3/schneider-Acti-9/Siemens-Betaguard/Anchor(UNO)/Eq. model of ABB/Hagar/LK/Havells/C and S/Panasonic Supply and fixing of 8 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years (For Inverter and Servant quarters,1 no for lift)
2
1688
3377.22
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO)/eq. Model of ABB/LK/Hager/C and S/Havells/Panasonic. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
12
321
3852
... More
Supplying and fixing 63 Amps rating,C series,10KA breaking capacity, 2P, 240 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO)/eq. Model of ABB/LK/Hager/C and S/Havells/Panasonic in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 3 years.
2
2224
4448
... More
Supplying and fixing 25 Amps rating,C series,10KA breaking capacity, 2P, 240 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO)/eq. Model of ABB/LK/Hager/C and S/Havells/Panasonic in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 3 years.
1
1692
1692
... More
(Earthing) INSTALLATION S/IT/C Of Earthing withG.I earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 2 years
2
2559
5118.22
... More
Providing and fixing 6 SWG G.I wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
44
66
2940.08
... More
Providing and fixing 25mm x 5 mm G.I strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.(DOUBLE RUN TO MAIN PANEL and APFC PANEL ,AC PANEL)
21
77
1631.91
... More
CABLING AND END TERMINATION MAIN AREA Supplying of one number PVC insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade of following size cables as per direction of Engg.-in-Charge. make-polycab/finolex/Havells/RR Kabel/KEI/Anchor 4core x 16 sq mm
66
301
19866
... More
LAYING OF CABLE Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
44
154
6783.92
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
22
102
2262.7
... More
Supplying and making end termination with brass comprecision gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. 4core x 16 sq mm
2
230
460
... More
Providing,fixing and laying of fallowing dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 50 mm dia
12
447
5364
... More
Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials(MAKE- Finolex/polycab)
30
109
3270
... More
PANELS MAIN METERING PANEL S/I/T and Commissioning of LT indoor floor mounted cubical type METERING electrical main panel (for QTR) made out by 2mm CRCA steel sheet duly derusted and pented by simens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge. 40x10mm Separate Aluminium Earth bus bar is to be provided.
1
76868
76868
... More
In commer- 01 number of 63(32-63) Amps 4P MCCB Icu=100 Percentage Ics,,16KA LSIG MCCB with micro processor based release( legrand dpx3/Siemens- 3va/ schneider cvs) with 63A 4P changeover switch (Make-HPL/LK/Siemens/Schneider). Busbar- 04 numbers of 100Amps Electrolytic copper busbar with 1.6A/SQ.MM current carring capacity.Busbar duly sleeved by color coated PVC sleeve and supported by suitable size DMC insulator. (for outgoing) Out going- (i) 63A 2P MCB rating,10 KA breaking capacity,C series, MCB (Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO)) 2 nos with space for 7 nos 10-60A 1PH KWH Meter digital type for each quarter . Instrument- (i) 06 numbers phase indicating lamp with toggle switch and HRC fuse. (ii) 02 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication . (iii)1 no. 3P+N 40kA type 1+2 SPD with 63A rating,10KA breaking capacity ,4P MCB(TYPE-I)(Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9) CABLE TRAY Supplying,fixing of perforated cable trays with horizental and vertical bends,reducers ,tees,crossover,brakets and other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 200mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
6
605
3630
... More
FIRE FIGHTING EXTINGUISHER SYSTEM Supply,Installation,Testing and Commisioning of ISI marked (IS:2878) Fire Extinguisher ,Carbon di-oxide type capacity 4.5kg with all accessories (Ever safe/Fire shield/Ceasefire/Safex)
2
7700
15400
... More
Fire buckets (FILLED WITH SAND) round bottom type enamel painted, white inside and Red out side and Letter "FIRE" in black out side and handle with mounting bracket.
2
4238
8476
... More
Floor identification signage (i.e, GROUND FLOOR… ETC.,) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5cm with contrasting colour from back ground. Size shall be 15cm * 60cm. Make-Bajaj/Prolite
2
1250
2500
... More
Fire Exit signage at each stair on every floor, indicating the direction of fire exit, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 45cm.Make-Bajaj/Prolite
2
760
1520
... More
Providing and fixing in position the signage of " Fire Extinguisher " to be fixed above the every extinguisher. Size 6" x 8"Make-Bajaj/Prolite
2
760
1520
... More
Lightning Protection Lightning Protection :- Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn
32
149
4768
... More
Supply of Roof conductor holder for parapet- Polyamide
Conductor holder:With M8 female thread or diameter 7mm, M8
Screw to connect the conductor holder.Weather and
temperature resistant from -35 to +90 degree Celsius tested.
Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn
24
51
1224
... More
Supply of Polyamide roof cable holder for flat roof:
DIN 48829 Form B1. Closed form with bottom. Filling weight
1Kg (frost-resistant concrete). Sleeve from polyethylene, black
@ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn
4
199
796
... More
Supply of Connector: For T cross and parallel connectors. Quick
installation using hexagonal bolt M10X30 high-grade hot dip
galvanised. Tested as per IEC 62561.(2nos/expansion piece ).Make-OBO/Dehn
4
203
812
... More
Supply of 1 mtr vertical air terminal with mounting accessories
on the flat surface to meet the requirements of IS/IEC 62305.
Tested for Electrical , mechanical and chemical as per IEC
62561. Tested for 100kA lightning current. Make-OBO/Dehn
2
1164
2328
... More
Supply of Vertical air terminal with accessories:Providing of Air terminals
as per IS-IEC -62305 part-3
Nominal size 10/16 mm aluminium rod:
3 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN
48801) Suitable for high wind load.
Tested as per IEC 62561. Make-OBO/Dehn
2
3156
6312
... More
Supply for Providing of Stand for Fang Fix system 16 kg with base and
clamp ,made up of frost resistant concrete and clamp tested
upto 100KA lightning current . Make-OBO/Dehn
2
2460
4920
... More
Supply for Providing of Stand for Fang Fix system 16 kg made up of frost
resistant concrete. Make-OBO/Dehn
2
954
1908
... More
Supply of Test Joint (Folding Clamp) suitable to connect 8mm
round conductor and max by 30x3 mm GI strip as specified in
drawing and directed by Engineer.
Tested for 100kA lightning current. Make-OBO/Dehn
2
380
760
... More
Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height
For Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn
2
277
554
... More
Supply of Galvanised Steel Flat 30X3 mm thickness from earth
electrode directly in ground as required. Flat conductor Hot
Dipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn
12
270
3240
... More
Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn
4
252
1008
... More
Supply of flat conductor holder- Fit: FL 30, With mounting hole
6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from
hot-dip galvanised steel, Bottom section from polyamide, black.
Tested as per IEC 62561. Make-OBO/Dehn
4
261
1044
... More
Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn
2
879
1758
... More
Supply of UL Listed maintenance free ,Low carbon copper
coated earth rod of 3 metre electrode having diameter of 17.2
mm with copper coating thickness of 250micron tested as per
IEC 62561-2 Make-OBO/Dehn
2
4183
8366
... More
Supply of universal clamp made of SS to connect rod with flat
conductor Make-OBO/Dehn
2
887
1774
... More
Supply of Earth conductivity enhancing mineral compound shall be of 25
kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn
2
2838
5676
... More
Supply of The above arrangements shall be provided with Heavy duty
earth champer of 5000kg load bearing capacity to ensure the
safety of earthing system Make-OBO/Dehn
2
2169
4338
... More
Installation of The above arrangements including all accessories as per Direction of Engg. In charge.
1
10500
10500
... More
3R QUARTERS Sub-Head I (modular Wiring Items) Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor (Make-Havells/Polycab/Finolex/RR Kable/Anchor ) of ISI marked with 20 mm dia PVC heavy class FRLS non metallic conduit(Make-AKG/Polycab/precision/norpack/sudhakar/Anchor) with 6A modular type switch(Make-Legrand(Myrius),Schneider(Zencelo),Panasonic(Europa) ) ISI marked , and ceiling rose ISI marked of modular type G.I box with cover , of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection .Raw power supply switch board shall be separate from emergency power supply switchboard as per direction of Engineer -in -Charge.Each light point should have proEuropa for ceiling rose and angle holder point. GROUP-A(QTRS)
32
497
15917.12
... More
GROUP-B(QTRS)
10
790
7900.3
... More
GROUP-C(COMMON ARAE)
12
1161
13939.44
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch and socket (modular type)(Make-Legrand(Myrius),Schneider(Zencelo),Panasonic(Europa) and other required accessories of ISI marked as approved as per direction of Engg. -in -Charge.
10
196
1960
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch and socket(modular type)(Make-Legrand(Myrius),Schneider(Zencelo),Panasonic(Europa) with suitable size modular box and cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.
20
496
9920.4
... More
Supplying,fixing of 16A Plug on the separate board with complete fitting by 01 no of 6A switch and socket(modular type) (Make-Legrand(Myrius),Schneider(Zencelo),Panasonic(Europa) with suitable size modular box and cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.
6
667
4002.24
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor FRLS, single core cable (Make-Havells/Polycab/Finolex/RR Kable/Anchor or equievalant) in recessed PVC conduit HEAVY duty (Make-AKG/Polycab/precision/norpack/sudhakar/Anchor) of mentioned size as approved) as required as per direction of Engg.-in-Charge.. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic FRLS heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
233
156
36513.43
... More
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic FRLS heavy duty PVC conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)
300
170
51201
... More
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic FRLS heavy duty PVC conduit . (2X4+1X1.5)
300
188
56412
... More
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic FRLS heavy duty PVC conduit .(PANEL TO BDB EACH QTR) (2X6+1X2.5)
200
219
43826
... More
Supplying and fixing of following sizes of heavy class FRLS PVC conduit (Make-AKG/Polycab/precision/norpack/sudhakar) along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .(For TV/Internet cable /Fire detection only) 20 MM
60
124
7440
... More
Supplying and installation of 25A AC starter Modular type or any other equivalent reputed make as approved coil voltage-415 Volt A.C. and O/L range of suitable range range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .(Make-Legrand/Schneider/ Havells/Hagar/ABB/C and S /Panasonic)
6
626
3756
... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover. as required as per direction of Engg.-in-Charge. (Make-Legrand(Myrius),Schneider(Zencelo),Panasonic(Europa)
2
213
426
... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .
8
74
596.96
... More
S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (Europa)
10
374
3740
... More
Sub-Head II (Light fitting Fixture and Fan) Supplying, installation, of exhaust fan of heavy duty 300 mm sweep with louvers any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing and conntection as required as per direction of Engg.-in-Charge. Make-Havells/Bajaj/Usha/Crompton /Anchor
6
3409
20457
... More
Supplying, installation, testing and commssioning of 1200 mm sweep BLDC ceiling fan with aluminium blades having wattage not more than 28W and Air delivery greater than equal to 215(m3/min) Make-USHA(Teohnix)/Crompton(Energion Groove)/Havells(Efficiencia Neo )/Anchor(Penta Power Star) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .
10
4587
45874.8
... More
SITC of energy efficient LED tube light fittings with decorative alumunium LED batten along with LED tube light having power rating 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser i/c connection etc as required. panasonic/havells/LT/Bajaj/Phillips/Crompton/Wipro
12
723
8686.68
... More
SITC of Sleek LED 10 watt mirror light fitting with decorative aluminium LED batten having extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
panasonic/havells/LT/Bajaj/Phillips/Crompton/Wipro
6
736
4416
... More
SITC of Sleek LED 9 watt LED Lamp complete with all accessories etc. directly on angle holder as required.
panasonic/havells/LT/Bajaj/Phillips/Crompton/Wipro/Halonix/Orient
4
110
440
... More
Supply and fixing of 10 Watt LED BH Fitting (panasonic/havells/LT/Bajaj/Phillips/Crompton/Wipro)
4
1020
4080
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
20
33
660
... More
Supplying, Erection, Fixing, connection and testing of LED street light with moveableG.I bracket and G.I Flat clamp ,90 W LED having die cast aluminium housing with toughened glass having lumen efficacy of 120 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 66 protection or more , LED street light .make-wipro/philips/Havells/Bajaj/panasonic . The luminaire should be supplied along with bracket maintenance free for inspection as required,wired by 1.5 sq. mm FRLS wire /cable along with earth wire as per direction of Engg.-in-Charge.
4
8157
32628
... More
Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10 Percentage , with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 5 years
12
1540
18480
... More
BDBS,DB,AC DB,FLOOR PANELS,MCBS Supplying and fixing of following mentioned way, three pole/single pole and neutral, 1.6 mm thickness sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. , or any other equivallent A catagories reputed make ISI marked as approved as per direction of Engg.-in-Charge. make-Legrand-Ekinox3/schneider-Acti-9/Siemens-Betaguard/Anchor(UNO)Eq. model of ABB/Hagar/LK/Havells/C and S/Panasonic Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years .(QTR and COMMON)
2
1961
3922.86
... More
Supply and fixing of 8 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years (For Inverter and Servant quarters,1 no for lift)
2
1688
3377.22
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO)eq. Model of ABB/LK/Hager/C and S/Havells/Panasonic. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
38
321
12198
... More
Supplying and fixing 63 Amps rating,C series,10KA breaking capacity, 2P, 240 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO)eq. Model of ABB/LK/Hager/C and S/Havells/Panasonic in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 3 years.
2
2224
4448
... More
Supplying and fixing 25 Amps rating,C series,10KA breaking capacity, 2P, 240 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO)eq. Model of ABB/LK/Hager/C and S/Havells/Panasonic in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 3 years.
2
1692
3384
... More
Supplying and fixing 32 amps rating, 400 volts AC, double poles MCB changeover with 3 position incorporating center off of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO)/eq. Model of ABB/LK/Hager/C and S/Havells/Panasonic in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
2
3500
7000
... More
(Earthing) INSTALLATION S/IT/C Of Earthing withG.I earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 2 years
2
2559
5118.22
... More
Providing and fixing 6 SWG G.I wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
100
66
6682
... More
Providing and fixing 25mm x 5 mm G.I strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.(DOUBLE RUN TO MAIN PANEL and APFC PANEL ,AC PANEL)
32
77
2486.72
... More
CABLING AND END TERMINATION MAIN AREA Supplying of one number PVC insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade of following size cables as per direction of Engg.-in-Charge. make-polycab/finolex/Havells/RR Kabel/KEI/Anchor 4core x 16 sq mm
100
301
30100
... More
LAYING OF CABLE Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
80
154
12334.4
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
20
102
2043.6
... More
Supplying and making end termination with brass comprecision gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. 4core x 16 sq mm
2
230
460
... More
Providing,fixing and laying of fallowing dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 50 mm dia
15
447
6705
... More
Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials(MAKE- Finolex/polycab)
88
109
9592
... More
PANELS MAIN METERING PANEL S/I/T and Commissioning of LT indoor floor mounted cubical type METERING electrical main panel (for QTR) made out by 2mm CRCA steel sheet duly derusted and pented by simens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge. 40x10mm Separate Aluminium Earth bus bar is to be provided.
1
93019
93019
... More
In commer- 01 number of 63 Amps 4P MCCB Icu=100 Percentage Ics,,16KA LSIG MCCB with micro processor based release( legrand dpx3/Siemens- 3va/ schneider cvs) with 63A 4P changeover switch (Make-HPL/LK/Siemens/Schneider). Busbar- 04 numbers of 100Amps Electrolytic copper busbar with 1.6A/SQ.MM current carring capacity.Busbar duly sleeved by color coated PVC sleeve and supported by suitable size DMC insulator. (for outgoing) Out going- (i) 63A 2P MCB rating,10 KA breaking capacity,C series, MCB (Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO)) 2 nos with space for 7 nos 10-60A 1PH KWH Meter digital type for each quarter . Out going- (ii) 25A 2P MCB rating,10 KA breaking capacity,C series, MCB (Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO)) 3 nos with space for 6no 10-40A 1PH KWH Meter digital type for common area. Out going- (iii) 63A 4P MCCB rating,16 KA breaking capacity (Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO)) 01 nos along with space for 3 Phase KWH meter for LIFT . Out going- (iv) 32A 2P MCB rating,10 KA breaking capacity,C series, MCB (Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO)) 2 nos with space for 6no 10-40A 1PH KWH Meter digital type for common area. Instrument- (i) 06 numbers phase indicating lamp with toggle switch and HRC fuse. (ii) 02 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication .(iii)1 no. 3P+N 40kA type 1+2 SPD with 63A rating,10KA breaking capacity ,4P MCB(TYPE-I)(Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO)) CABLE TRAY Supplying,fixing of perforated cable trays with horizental and vertical bends,reducers ,tees,crossover,brakets and other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 200mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
14
605
8470
... More
Fire Fighting EXTINGUISHER SYSTEM Supply,Installation,Testing and Commisioning of ISI marked (IS:2878) Fire Extinguisher ,Carbon di-oxide type capacity 4.5kg with all accessories (Ever safe/Fire shield/Ceasefire/Safex)
2
7700
15400
... More
Supply,Installation,Testing and Commisioning of ISI marked (IS:2878) Fire Extinguisher ,ABC type capacity 6kg with all accessories (Ever safe/Fire shield/Ceasefire/Safex)
2
3264
6528
... More
Fire buckets (FILLED WITH SAND) round bottom type enamel painted, white inside and Red out side and Letter "FIRE" in black out side and handle with mounting bracket.
2
4238
8476
... More
SIGNAGES Floor identification signage (i.e, GROUND FLOOR… ETC.,) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5cm with contrasting colour from back ground. Size shall be 15cm * 60cm. Make-Bajaj/Prolite
2
1250
2500
... More
Fire Exit signage at each stair on every floor, indicating the direction of fire exit, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 45cm.Make-Bajaj/Prolite
2
760
1520
... More
Providing and fixing in position the signage of " Fire Extinguisher " to be fixed above the every extinguisher. Size 6" x 8"Make-Bajaj/Prolite
2
760
1520
... More
Lightning Protection Lightning Protection :- Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn
44
149
6556
... More
Supply of Roof conductor holder for parapet- Polyamide
Conductor holder:With M8 female thread or diameter 7mm, M8
Screw to connect the conductor holder.Weather and
temperature resistant from -35 to +90 degree Celsius tested.
Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn
32
51
1632
... More
Supply of Polyamide roof cable holder for flat roof:
DIN 48829 Form B1. Closed form with bottom. Filling weight
1Kg (frost-resistant concrete). Sleeve from polyethylene, black
@ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn
6
199
1194
... More
Supply of Connector: For T cross and parallel connectors. Quick
installation using hexagonal bolt M10X30 high-grade hot dip
galvanised. Tested as per IEC 62561.(2nos/expansion piece ).Make-OBO/Dehn
6
203
1218
... More
Supply of 1 mtr vertical air terminal with mounting accessories
on the flat surface to meet the requirements of IS/IEC 62305.
Tested for Electrical , mechanical and chemical as per IEC
62561. Tested for 100kA lightning current. Make-OBO/Dehn
4
1164
4656
... More
Supply of Vertical air terminal with accessories:Providing of Air terminals
as per IS-IEC -62305 part-3
Nominal size 10/16 mm aluminium rod:
3 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN
48801) Suitable for high wind load.
Tested as per IEC 62561. Make-OBO/Dehn
2
3156
6312
... More
Supply for Providing of Stand for Fang Fix system 16 kg with base and
clamp ,made up of frost resistant concrete and clamp tested
upto 100KA lightning current . Make-OBO/Dehn
2
2460
4920
... More
Supply for Providing of Stand for Fang Fix system 16 kg made up of frost
resistant concrete. Make-OBO/Dehn
4
954
3816
... More
Supply of Test Joint (Folding Clamp) suitable to connect 8mm
round conductor and max by 30x3 mm GI strip as specified in
drawing and directed by Engineer.
Tested for 100kA lightning current. Make-OBO/Dehn
4
380
1520
... More
Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height
For Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn
4
277
1108
... More
Supply of Galvanised Steel Flat 30X3 mm thickness from earth
electrode directly in ground as required. Flat conductor Hot
Dipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn
21
270
5670
... More
Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn
6
252
1512
... More
Supply of flat conductor holder- Fit: FL 30, With mounting hole
6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from
hot-dip galvanised steel, Bottom section from polyamide, black.
Tested as per IEC 62561. Make-OBO/Dehn
8
261
2088
... More
Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn
2
879
1758
... More
Supply of UL Listed maintenance free ,Low carbon copper
coated earth rod of 3 metre electrode having diameter of 17.2
mm with copper coating thickness of 250micron tested as per
IEC 62561-2 Make-OBO/Dehn
2
4183
8366
... More
Supply of universal clamp made of SS to connect rod with flat
conductor Make-OBO/Dehn
2
887
1774
... More
Supply of Earth conductivity enhancing mineral compound shall be of 25
kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn
2
2838
5676
... More
Supply of The above arrangements shall be provided with Heavy duty
earth champer of 5000kg load bearing capacity to ensure the
safety of earthing system Make-OBO/Dehn
2
2169
4338
... More
Installation of The above arrangements including all accessories as per Direction of Engg. In charge.
1
10500
10500
... More
Girls Hostel Sub-Head I (modular Wiring Items) Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (Europa) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (Europa) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials. GROUP-A
19
497
9450.79
... More
GROUP-B
19
790
15010.57
... More
GROUP-C
49
1161
56919.38
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch and socket (modular type)( ( flame retradant type)) and other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (Europa) .(Maximum 02 nos point in one circuit).All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
18
196
3528
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch and socket(modular type)( ( flame retradant type)) with suitable size modular box and cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius ) /Panasonic (Europa) .(Maximum 02 nos point in one circuit).All the switches and sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
26
496
12896.52
... More
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch and socket(modular type)(( flame retradant type)) with suitable size modular box and cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (Europa) (For equipement power)All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
8
667
5336.32
... More
Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch and socket(modular type) ( ( flame retradant type) with suitable size modular box and metallic cover plate (both side)( flame retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius )/Panasonic (Europa) (For equipement power)(Maximum 02 nos point in one circuit).All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
15
1224
18360
... More
Supplying,fixing of 3x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+3 nos 6A switch and socket(modular type) ( ( flame retradant type) with suitable size modular box and metallic cover plate (both side)( flame retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider (Zencelo)/ legrand( ( Myrius)) /Panasonic (Europa) (For equipement power). (Maximum 02 nos point in one circuit).All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials.
6
1996
11976
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
388
156
60803.48
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)
352
170
60075.84
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)
255
188
47950.2
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5)
185
219
40539.05
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit.(LFDB TO LBDB/Medical equipement) (4X6+2X4)
145
316
45898.3
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)
146
443
64793.34
... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover.Make- Havells/Anchor , A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
2
213
426
... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
12
74
895.44
... More
S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (Europa)
40
374
14960
... More
Sub-Head II (Light fitting Fixture and Fan) Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj/Anchor ) of exhaust fan in the existing wall, including fixing and conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
7
3409
23866.5
... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers(Make- Havells/Crompton/Usha/Orient/Bajaj/Anchor ) of exhaust fan in the existing wall, including fixing and conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
2
3873
7746
... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery greater than equal to215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix / Anchor(Penta Power Star) ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years..
20
4587
91749.6
... More
Supplying and fixing of Energy efficient Recess /Surface mounted square/round shaped LED luminaire made up of CRCA powder coated sheet steel of 36W (595X595X70MM)and system lumens output not less than 4680 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10 Percentage ,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 5 years. Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10 Percentage , with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years
30
1540
46200
... More
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years .
35
723
25336.15
... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years
10
736
7360
... More
Supply and fixing of 10 Watt LED BH Fitting (panasonic/havells/LT/Bajaj/Phillips/Crompton/Wipro/Halonix/Orient.)
6
1020
6120
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
30
39
1170
... More
BDBS,DB,AC DB,FLOOR PANELS,MCBS Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO) as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years. 4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar and Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years
5
2223
11116.65
... More
Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years
3
1961
5884.29
... More
4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)Warranty on DB is 3 years
3
929
2787.81
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO). the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
98
321
31458
... More
Supplying and fixing 40 Amps rating, C series,10KA breaking capacity,4P, 415 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
2
2966
5932
... More
Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 4P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The MCB should be Replacement Warranty will be 3 years.
2
5239
10478
... More
Supplying and fixing 6-32Amps rating,C series,10KA breaking capacity, DP 240 volts, MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
3
963
2889
... More
Supplying and fixing 40Amps rating,C series,10KA breaking capacity, DP 240 volts, MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
2
1525
3050
... More
Supplying and fixing 40Amps 2P 240 volts RCCB 30 mA Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The MCB should be Replacement Warranty will be 3 years.
2
4581
9162
... More
Supplying and fixing 63Amps rating,C series,10KA breaking capacity, 4P 415 volts MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The MCB should be Replacement Warranty will be 3 years.
3
2966
8898
... More
Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ Anchor(UNO) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The MCB should be Replacement Warranty will be 3 years.
3
5239
15717
... More
(Earthing) INSTALLATION S/IT/C of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts and washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil and rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 2 years
2
2559
5118.22
... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
122
108
13278.48
... More
Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
44
77
3419.24
... More
CABLING AND END TERMINATION MAIN AREA Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI of following size cables as per direction of Engg.-in-Charge. Ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials 4core x 16 sq mm
15
305
4575
... More
4 core x 6 sq mm (for small power)
15
211
3165
... More
3.5core x 50 sq mm
50
573
28650
... More
LAYING OF CABLE Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
24
154
3700.32
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
50
175
8754.5
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
5
56
280
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
10
77
770
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge.
40
45
1800
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
12
61
732
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
9
102
925.65
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
12
157
1890.36
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. 4 core x16sq mm
2
230
460
... More
3.5 core x50 sq mm
2
413
826.16
... More
Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 50 mm dia
8
447
3576
... More
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 200 mm dia
12
866
10392
... More
PANELS MAIN CONTROL PANEL AT GF S/I/T and Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted and painted by siemens gray powder cote paint fallowed by 9 tank acid treatment is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel and accessories must be 3 years and compelete test certificate must be submitted along with panel board including component list.Separate Aluminium Earth bus bar should be installed.
1
137393
137393
... More
In commer-1-01 number of 1004P Icu=100 Percentage Ics,36Ka LSIG MCCB with micro processor based release Electrical locking for normal and DG ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS In commer-2-01 number of 63A 4P Icu=100 Percentage Ics,36kA LSIG MCCB with micro processor based release Electrical locking for normal and DG ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS) In commer-2- 01 no of 63A 4P onload changeover switch (Make-HPL/L and T/Siemens/Schneider) Busbar-1 and 2 04 numbers of 200Amps copper busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve and supported by suitable size DMC insulator. (for outgoing) Out going- 4 numbers of 32A 4P MCB,10kA breaking capacity, C Series (make- Legrand-DX3/Schneider-Acti 9/Siemens-Betaguard/ Anchor(UNO)) Out going- 4 numbers of 63A 4P MCB10kA breaking capacity, C Series (make- Legrand-DX3/Schneider-Acti 9/Siemens-Betaguard/ Anchor(UNO)) Out going- 6 numbers of 63A DP MCB10kA breaking capacity, C Series (make- Legrand-DX3/Schneider-Acti 9/Siemens-Betaguard/ Anchor(UNO)) Out going- 02 numbers of 63A 4P MCCB,25Ka MCCB with TMR based release with adjustable overload ,Icu=100 Percentage Ics( Make-LEGRAND-DPX3 / Siemens-3VM Model/ Schneider- NSX) Instrument- (i) 06 numbers phase indicating lamp with toggle switch and HRC fuse. (ii) 02 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication with RS 485 COMPACTIVITY FOR bms data.1 no. 3P+N 12.5kA/POLE SPDwith 63A 4P MCB(TYPE-I)(make- Legrand/Schneider/Siemens) UPS SYSTEM(For COMMON AREA) Supply ,installation ,testing and commissioning of 10KVA/10kW UPS SYSTEM WITH IGBT based inverter system, true online double conversion system, inbuilt isolation transformer and automatic phase sequence corrector of 3ph in put to 3 ph output,415V, with built in BMS with battery back up up to 30 minutes with MS Rack for battery Housing, DC cable 7 Mtr with SFU and links for installation (Battery required: 12V, 42AH, 20 No.s) protection for fault by OL,UV,EF,GF,OC,Ph. (Make: Numeric/RELLIO/ Vertiv) as per direction of Engg.-in-Charge. Warrentee period of all accessories and component and system must be 2 years and compelete test certificate must be submitted along with ups including component list and SLD. CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWER Supplying,fixing of perforated cable trays with horizental and vertical bends,reducers ,tees,crossover,brakets and other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 200mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
12
605
7260
... More
Supplying,fixing of perforated cable trays with horizental and vertical bends,reducers ,tees,crossover,brakets and other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 300mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
10
689
6898.3
... More
Supplying,fixing of perforated cable trays with horizental and vertical bends,reducers ,tees,crossover,brakets and other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 400mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
10
913
9131.6
... More
Supplying,fixing of FLOOR RACE WAY WITH JUNCTION box GALVANIZED(GC) type AS PER EN-ISO-1461 , with internal dimensions of size 38mm(H) x 225mm(W), of Profab/ OBO/ Neidax .(With all accessories,bend, cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge.(3 COMPARTMENT TOTAL 54 MM HEIGHT.
10
1781
17810.4
... More
DATA and TELEPHONE SYSTEM Data Networking System:-Supply and laying of 4 pair Cat6 U/UTP Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20degree to +70degreeC Cable support Conductor Resistance Less than equal to 9.38 ohm/100m Max., Cable support Delay Skew: less than 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 ohm @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Tyco / Legrand / Panduit
32
62
1984
... More
Supply and Installation of Cat6 I/O with Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, and EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz and CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold greater than 0.8 Microm. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94-V-O certified. Make: Tyco / Legrand / Panduit I/O Single
2
416
832
... More
Supply and installation of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50Micro’’ Gold Plated Contacts , 100 Percentage Factory Tested , Transparent Boot Cable Assemblies. Make: Tyco / Legrand / Panduit 1mtr Lenghth
2
326
652
... More
Supply and laying of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173-1:2002 / IEC 60794-1/IEC 60793-2-50 class B1.3 / EN 60793-2-50: class B1.3 / ITU Recommendation G.652.D - the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 - 2002 incl. 802.3ae ) Jacket. Make: Tyco / Legrand / Digisol
32
111
3552
... More
Supply, Installation,Testing and Commisioning of 6Port Rack Mount Loaded LIU including SM SC Adaptor and Pigtail. Make: Legrand/Systimax/Panduit
1
8002
8002
... More
Supply and installation of OFC PATCHCORD, SM (OS2), DUPLEX LC-SC, PC TYPE, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : less than= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PCgreater than= 45db, UPCgreater than=50db, APCgreater than=60db. Make: Tyco / Legrand / Digisol
1
1554
1554
... More
Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate and cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
2
382
764
... More
Supplying and fixing of clip in type modular T.V. antenna socket ISI marked on mounted on G.I modular box with face plate and cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.
2
392
784
... More
Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.
66
45
2970
... More
Recessed wiring to television point with cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in in existing surface / recessed PVC conduit as required as per direction of Engineer in Charge.
66
42
2772
... More
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
( Tel junction Box)
2
180
360
... More
Supplying and Commissioning of Telephone Hand Set.
2
734
1468
... More
Supplying and installation of 50 pair KRONE make moudles with locking and key arrangements fabricated with MS sheet and powder coated to be fixed on concealed manner incl. good the damages.
1
2500
2500
... More
FIRE FIGHTING EXTINGUISHER SYSTEM Supply,Installation,Testing and Commisioning of ISI marked (IS:2878) Fire Extinguisher ,Carbon di-oxide type capacity 4.5kg with all accessories (Ever safe/Fire shield/Ceasefire/Safex)
4
7700
30800
... More
Supply,Installation,Testing and Commisioning of ISI marked (IS:2878) Fire Extinguisher ,ABC type capacity 6kg with all accessories (Ever safe/Fire shield/Ceasefire/Safex)
2
3264
6528
... More
Fire buckets (FILLED WITH SAND) round bottom type enamel painted, white inside and Red out side and Letter "FIRE" in black out side and handle with mounting bracket.
2
4238
8476
... More
SIGNAGES Floor identification signage (i.e, GROUND FLOOR… ETC.,) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5cm with contrasting colour from back ground. Size shall be 15cm * 60cm. Make-Bajaj/Prolite
2
1250
2500
... More
Fire Exit signage at each stair on every floor, indicating the direction of fire exit, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 45cm.Make-Bajaj/Prolite
2
760
1520
... More
Providing and fixing in position the signage of " Fire Extinguisher " to be fixed above the every extinguisher. Size 6" x 8"Make-Bajaj/Prolite
2
760
1520
... More
LIGHTING SYSTEM Supplying, Erection, Fixing, connection and testing of LED BOUNDRY WALL Light of elegant look (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) 35 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more , LED street light model having warrantied for a period of 5 years . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge.
4
3220
12883.28
... More
Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials
82
109
8938
... More
LIGHTENING PROTECION SYSTEM Lightning Protection :- Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn
34
149
5066
... More
Supply of Roof conductor holder for parapet- Polyamide Conductor holder:With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn
24
51
1224
... More
Supply of Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn
12
199
2388
... More
Supply of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Tested as per IEC 62561.(2nos/expansion piece ).Make-OBO/Dehn
10
203
2030
... More
Supply of 1 mtr vertical air terminal with mounting accessories on the flat surface to meet the requirements of IS/IEC 62305. Tested for Electrical , mechanical and chemical as per IEC 62561. Tested for 100kA lightning current. Make-OBO/Dehn
4
1164
4656
... More
Supply of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size 10/16 mm aluminium rod: 3 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. Tested as per IEC 62561. Make-OBO/Dehn
2
4049
8098
... More
Supply for Providing of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete and clamp tested upto 100KA lightning current . Make-OBO/Dehn
4
2460
9840
... More
Supply for Providing of Stand for Fang Fix system 16 kg made up of frost resistant concrete. Make-OBO/Dehn
10
954
9540
... More
Supply of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer. Tested for 100kA lightning current. Make-OBO/Dehn
8
380
3040
... More
Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height For Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn
8
277
2216
... More
Supply of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor Hot Dipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn
12
270
3240
... More
Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn
12
252
3024
... More
Supply of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from hot-dip galvanised steel, Bottom section from polyamide, black. Tested as per IEC 62561. Make-OBO/Dehn
4
261
1044
... More
Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn
4
879
3516
... More
Supply of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 17.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 Make-OBO/Dehn
2
4183
8366
... More
Supply of universal clamp made of SS to connect rod with flat conductor Make-OBO/Dehn
2
887
1774
... More
Supply of Earth conductivity enhancing mineral compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn
2
2838
5676
... More
Supply of The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system Make-OBO/Dehn
1
2169
2169
... More
Installation of The above arrangements including all accessories as per Direction of Engg. In charge.
1
12000
12000
... More
Boys Hostel Sub-Head I (modular Wiring Items) Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (Europa) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (Europa) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials. GROUP-A
19
497
9450.79
... More
GROUP-B
19
790
15010.57
... More
GROUP-C
49
1161
56919.38
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch and socket (modular type)( ( flame retradant type)) and other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (Europa) .(Maximum 02 nos point in one circuit).All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
18
196
3528
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch and socket(modular type)( ( flame retradant type)) with suitable size modular box and cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius ) /Panasonic (Europa) .(Maximum 02 nos point in one circuit).All the switches and sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
26
496
12896.52
... More
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch and socket(modular type)(( flame retradant type)) with suitable size modular box and cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (Europa) (For equipement power)All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
8
667
5336.32
... More
Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch and socket(modular type) ( ( flame retradant type) with suitable size modular box and metallic cover plate (both side)( flame retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius )/Panasonic (Europa) (For equipement power)(Maximum 02 nos point in one circuit).All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
15
1224
18360
... More
Supplying,fixing of 3x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+3 nos 6A switch and socket(modular type) ( ( flame retradant type) with suitable size modular box and metallic cover plate (both side)( flame retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider (Zencelo)/ legrand( ( Myrius)) /Panasonic (Europa) (For equipement power). (Maximum 02 nos point in one circuit).All the switches and sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials.
6
1996
11976
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
388
156
60803.48
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)
352
170
60075.84
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)
255
188
47950.2
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5)
185
219
40539.05
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit.(LFDB TO LBDB/Medical equipement) (4X6+2X4)
145
316
45898.3
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)
146
443
64793.34
... More
Supplying and installation of 25A AC starter Modular type, Schneider/Siemens/Legrand/Panasonic coil voltage-230 Volt A.C. on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials. Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover.Make- Havells/Anchor , A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
2
213
426
... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free aftersales service within warranty period for acceptance of materials.
12
74
895.44
... More
S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (Europa)
40
374
14960
... More
Sub-Head II (Light fitting Fixture and Fan) Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- hevells/Crompton/Usha/Orient/Bajaj/Anchor ) of exhaust fan in the existing wall, including fixing and conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
7
3409
23866.5
... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers(Make- Havells/Crompton/Usha/Orient/Bajaj/Anchor ) of exhaust fan in the existing wall, including fixing and conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
2
3873
7746
... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery greater than equal to215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix /Anchor(Penta Power Star) ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years..
20
4587
91749.6
... More
Supplying and fixing of Energy efficient Recess /Surface mounted square/round shaped LED luminaire made up of CRCA powder coated sheet steel of 36W (595X595X70MM)and system lumens output not less than 4680 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10 Percentage ,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 5 years. Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10 Percentage , with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years
30
1540
46200
... More
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years .
35
723
25336.15
... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years
10
736
7360
... More
Supply and fixing of 10 Watt LED BH Fitting (panasonic/havells/LT/Bajaj/Phillips/Crompton/Wipro/Halonix/Orient.)
6
1020
6120
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
30
39
1170
... More
BDBS,DB,AC DB,FLOOR PANELS,MCBS Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO) as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years. 4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar and Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years
5
2223
11116.65
... More
Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years
3
1961
5884.29
... More
2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)Warranty on DB is 3 years
3
929
2787.81
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO). the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
98
321
31458
... More
Supplying and fixing 40 Amps rating, C series,10KA breaking capacity,4P, 415 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
2
2966
5932
... More
Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 4P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The MCB should be Replacement Warranty will be 3 years.
2
5239
10478
... More
Supplying and fixing 6-32Amps rating,C series,10KA breaking capacity, DP 240 volts, MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 /Anchor(UNO) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
3
963
2889
... More
Supplying and fixing 40Amps rating,C series,10KA breaking capacity, DP 240 volts, MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
2
1525
3050
... More
Supplying and fixing 40Amps 2P 240 volts RCCB 30 mA Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The MCB should be Replacement Warranty will be 3 years.
2
4581
9162
... More
Supplying and fixing 63Amps rating,C series,10KA breaking capacity, 4P 415 volts MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 /Anchor(UNO) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The MCB should be Replacement Warranty will be 3 years.
3
2966
8898
... More
Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/Anchor(UNO) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The MCB should be Replacement Warranty will be 3 years.
3
5239
15717
... More
(Earthing) INSTALLATION S/IT/C of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts and washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil and rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 2 years
2
2559
5118.22
... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
122
108
13278.48
... More
Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
44
77
3419.24
... More
CABLING AND END TERMINATION MAIN AREA Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI of following size cables as per direction of Engg.-in-Charge. Ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials 4core x 16 sq mm
15
305
4575
... More
4 core x 6 sq mm (for small power)
15
211
3165
... More
3.5core x 50 sq mm
50
573
28650
... More
LAYING OF CABLE Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
24
154
3700.32
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
50
175
8754.5
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
5
56
280
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
10
77
770
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge.
40
45
1800
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
12
61
732
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
9
102
925.65
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
12
157
1890.36
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. 4 core x16sq mm
2
230
460
... More
3.5 core x50 sq mm
2
413
826.16
... More
Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 50 mm dia
8
447
3576
... More
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 200 mm dia
12
866
10392
... More
PANELS MAIN CONTROL PANEL AT GF S/I/T and Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted and painted by siemens gray powder cote paint fallowed by 9 tank acid treatment is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel and accessories must be 3 years and compelete test certificate must be submitted along with panel board including component list.Separate Aluminium Earth bus bar should be installed.
1
137393
137393
... More
In commer-1-01 number of 1004P Icu=100 Percentage Ics,36Ka LSIG MCCB with micro processor based release Electrical locking for normal and DG ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS In commer-2-01 number of 63A 4P Icu=100 Percentage Ics,36kA LSIG MCCB with micro processor based release Electrical locking for normal and DG ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS) In commer-2- 01 no of 63A 4P onload changeover switch (Make-HPL/L and T/Siemens/Schneider) Busbar-1 and 2 04 numbers of 200Amps copper busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve and supported by suitable size DMC insulator. (for outgoing) Out going- 4 numbers of 32A 4P MCB,10kA breaking capacity, C Series (make- Legrand-DX3/Schneider-Acti 9/Siemens-Betaguard/Anchor(UNO)) Out going- 4 numbers of 63A 4P MCB10kA breaking capacity, C Series (make- Legrand-DX3/Schneider-Acti 9/Siemens-Betaguard/Anchor(UNO)) Out going- 6 numbers of 63A DP MCB10kA breaking capacity, C Series (make- Legrand-DX3/Schneider-Acti 9/Siemens-Betaguard/Anchor(UNO)) Out going- 02 numbers of 63A 4P MCCB,25Ka MCCB with TMR based release with adjustable overload ,Icu=100 Percentage Ics( Make-LEGRAND-DPX3 / Siemens-3VM Model/ Schneider- NSX) Instrument- (i) 06 numbers phase indicating lamp with toggle switch and HRC fuse.(ii) 02 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication with RS 485 COMPACTIVITY FOR bms data.1 no. 3P+N 12.5kA/POLE SPDwith 63A 4P MCB(TYPE-I)(make- Legrand/Schneider/Siemens) UPS SYSTEM(For COMMON AREA) Supply ,installation ,testing and commissioning of 10KVA/10kW UPS SYSTEM WITH IGBT based inverter system, true online double conversion system, inbuilt isolation transformer and automatic phase sequence corrector of 3ph in put to 3 ph output,415V, with built in BMS with battery back up up to 30 minutes with MS Rack for battery Housing, DC cable 7 Mtr with SFU and links for installation (Battery required: 12V, 42AH, 20 No.s) protection for fault by OL,UV,EF,GF,OC,Ph. (Make: Numeric/RELLIO/ Vertiv) as per direction of Engg.-in-Charge. Warrentee period of all accessories and component and system must be 2 years and compelete test certificate must be submitted along with ups including component list and SLD. CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWER Supplying,fixing of perforated cable trays with horizental and vertical bends,reducers ,tees,crossover,brakets and other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 200mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
12
605
7260
... More
Supplying,fixing of perforated cable trays with horizental and vertical bends,reducers ,tees,crossover,brakets and other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 300mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
10
689
6898.3
... More
Supplying,fixing of perforated cable trays with horizental and vertical bends,reducers ,tees,crossover,brakets and other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 400mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge.
10
913
9131.6
... More
Supplying,fixing of FLOOR RACE WAY WITH JUNCTION box GALVANIZED(GC) type AS PER EN-ISO-1461 , with internal dimensions of size 38mm(H) x 225mm(W), of Profab/ OBO/ Neidax .(With all accessories,bend, cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge.(3 COMPARTMENT TOTAL 54 MM HEIGHT.
10
1781
17810.4
... More
DATA and TELEPHONE SYSTEM Data Networking System:-Supply and laying of 4 pair Cat6 U/UTP Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20degree to +70degreeC Cable support Conductor Resistance Less than equal to 9.38 ohm/100m Max., Cable support Delay Skew: less than 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 ohm @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Tyco / Legrand / Panduit
32
62
1984
... More
Supply and Installation of Cat6 I/O with Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, and EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz and CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold greater than 0.8 Microm. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94-V-O certified. Make: Tyco / Legrand / Panduit I/O Single
2
416
832
... More
Supply and installation of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50Micro’’ Gold Plated Contacts , 100 Percentage Factory Tested , Transparent Boot Cable Assemblies. Make: Tyco / Legrand / Panduit 1mtr Lenghth
2
326
652
... More
Supply and laying of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173-1:2002 / IEC 60794-1/IEC 60793-2-50 class B1.3 / EN 60793-2-50: class B1.3 / ITU Recommendation G.652.D - the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 - 2002 incl. 802.3ae ) Jacket. Make: Tyco / Legrand / Digisol
32
111
3552
... More
Supply, Installation,Testing and Commisioning of 6Port Rack Mount Loaded LIU including SM SC Adaptor and Pigtail. Make: Legrand/Systimax/Panduit
1
8002
8002
... More
Supply and installation of OFC PATCHCORD, SM (OS2), DUPLEX LC-SC, PC TYPE, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : less than= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PCgreater than= 45db, UPCgreater than=50db, APCgreater than=60db. Make: Tyco / Legrand / Digisol
1
1554
1554
... More
Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate and cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
2
382
764
... More
Supplying and fixing of clip in type modular T.V. antenna socket ISI marked on mounted on G.I modular box with face plate and cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.
2
392
784
... More
Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.
66
45
2970
... More
Recessed wiring to television point with cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in in existing surface / recessed PVC conduit as required as per direction of Engineer in Charge.
66
42
2772
... More
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
( Tel junction Box)
2
180
360
... More
Supplying and Commissioning of Telephone Hand Set.
2
734
1468
... More
Supplying and installation of 50 pair KRONE make moudles with locking and key arrangements fabricated with MS sheet and powder coated to be fixed on concealed manner incl. good the damages.
1
2500
2500
... More
FIRE FIGHTING EXTINGUISHER SYSTEM Supply,Installation,Testing and Commisioning of ISI marked (IS:2878) Fire Extinguisher ,Carbon di-oxide type capacity 4.5kg with all accessories (Ever safe/Fire shield/Ceasefire/Safex)
4
7700
30800
... More
Supply,Installation,Testing and Commisioning of ISI marked (IS:2878) Fire Extinguisher ,ABC type capacity 6kg with all accessories (Ever safe/Fire shield/Ceasefire/Safex)
2
3264
6528
... More
Fire buckets (FILLED WITH SAND) round bottom type enamel painted, white inside and Red out side and Letter "FIRE" in black out side and handle with mounting bracket.
2
4238
8476
... More
SIGNAGES Floor identification signage (i.e, GROUND FLOOR… ETC.,) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5cm with contrasting colour from back ground. Size shall be 15cm * 60cm. Make-Bajaj/Prolite
2
1250
2500
... More
Fire Exit signage at each stair on every floor, indicating the direction of fire exit, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 45cm.Make-Bajaj/Prolite
2
760
1520
... More
Providing and fixing in position the signage of " Fire Extinguisher " to be fixed above the every extinguisher. Size 6" x 8"Make-Bajaj/Prolite
2
760
1520
... More
LIGHTING SYSTEM Supplying, Erection, Fixing, connection and testing of LED BOUNDRY WALL Light of elegant look (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) 35 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more , LED street light model having warrantied for a period of 5 years . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge.
4
3220
12883.28
... More
Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report and Warrnaty certificate to be submitted to the department for genuinity of product and to avail free after sales service within warranty period for acceptance of materials
82
109
8938
... More
LIGHTENING PROTECION SYSTEM Lightning Protection :- Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn
34
149
5066
... More
Supply of Roof conductor holder for parapet- Polyamide Conductor holder:With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn
24
51
1224
... More
Supply of Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn
12
199
2388
... More
Supply of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Tested as per IEC 62561.(2nos/expansion piece ).Make-OBO/Dehn
10
203
2030
... More
Supply of 1 mtr vertical air terminal with mounting accessories on the flat surface to meet the requirements of IS/IEC 62305. Tested for Electrical , mechanical and chemical as per IEC 62561. Tested for 100kA lightning current. Make-OBO/Dehn
4
1164
4656
... More
Supply of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size 10/16 mm aluminium rod: 3 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. Tested as per IEC 62561. Make-OBO/Dehn
2
4049
8098
... More
Supply for Providing of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete and clamp tested upto 100KA lightning current . Make-OBO/Dehn
4
2460
9840
... More
Supply for Providing of Stand for Fang Fix system 16 kg made up of frost resistant concrete. Make-OBO/Dehn
10
954
9540
... More
Supply of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer. Tested for 100kA lightning current. Make-OBO/Dehn
8
380
3040
... More
Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height For Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn
8
277
2216
... More
Supply of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor Hot Dipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn
12
270
3240
... More
Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn
12
252
3024
... More
Supply of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from hot-dip galvanised steel, Bottom section from polyamide, black. Tested as per IEC 62561. Make-OBO/Dehn
4
261
1044
... More
Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn
4
879
3516
... More
Supply of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 17.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 Make-OBO/Dehn
2
4183
8366
... More
Supply of universal clamp made of SS to connect rod with flat conductor Make-OBO/Dehn
2
887
1774
... More
Supply of Earth conductivity enhancing mineral compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn
2
2838
5676
... More
Supply of The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system Make-OBO/Dehn
1
2169
2169
... More
Installation of The above arrangements including all accessories as per Direction of Engg. In charge.
1
12000
12000
... More
PH ACADEMIC BLOCK A- Internal PH Work Supplying all materials, labour,T and Pand providing and fixing to wall or ceiling and floor Chlorinated Polyvinyl Chloride (C-PVC) pipes (Make-Astral/Finolex) conforming to IS:15778,having thermal stability for hot and cold water supply , including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Ground Floor 20mm dia C-PVC pipe
30
272
8187
... More
25mm dia C-PVC pipe
30
361
10836
... More
32mm dia C-PVC pipe
30
534
16020
... More
40mm dia C-PVC pipe
50
722
36105
... More
In 1st Floor 20mm dia C-PVC pipe
30
284
8523
... More
25mm dia C-PVC pipe
30
372
11172
... More
32mm dia C-PVC pipe
30
546
16407
... More
40mm dia C-PVC pipe
10
738
7387
... More
In 2nd Floor 25mm dia C-PVC pipe
30
383
11511
... More
32mm dia C-PVC pipe
30
559
16794
... More
40mm dia C-PVC pipe
50
755
37770
... More
Supplying all materials, labour, T and P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mm thick wall in Ground floor
15
61
918
... More
In 1st Floor
15
62
934.5
... More
In 2nd Floor
10
63
635
... More
Supplying all materials, labour, T and P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor
10
211
2113
... More
In 1st Floor
10
212
2123
... More
Supplying all materials, labour, T and P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor
45
210
9486
... More
In 1st Floor
45
217
9796.5
... More
Supplying all materials, labour, T and P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall in 1st Floor to 5th Floor
20
236
4734
... More
Supplying all materials, labour, T and P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar/Parreware make)
26
1615
42011.32
... More
15mm dia CP CP Angle stop cock (Jaquar/Parreware-Con-CHR-053KN)
42
995
41802.6
... More
15mm dia CP extension piece
62
59
3676.6
... More
15mm dia CP Pillar cock (Jaquar/Parreware-Con-CHR-011KN )
17
1358
23091.1
... More
25mm dia G.M or Brass F.W valve (Sakti make)
5
933
4669
... More
32mm dia G.M or Brass F.W valve (Sakti make)
6
1367
8205.6
... More
40mm dia G.M or Brass F.W valve (Sakti make)
5
1367
6838
... More
125mm dia CP gratings
12
84
1009.2
... More
Supplying all materials, labour, T and P and fitting and fixing 12.50 litres/10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge 10 litres PVC L.L. Cistern (Slimline-white)
18
1702
30652.2
... More
Supplying all materials,labour,T and P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge 2000 Ltr PVC water storage tank (3 Layer White)-on 2nd. Floor
5
43279
216395
... More
Supplying all materials, labour, T and P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV/80 SS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge. Aquaguard cooler cum purifier(Aqualguard pure chill 80 SS UV)
2
87838
175676.8
... More
Supplying all materials, labour, T and P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings (Make-Supreme/Finolex) of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge. 75mm dia U-PVC SWR pipes
15
338
5074.5
... More
75mm U-PVC plain bend
8
184
1472
... More
110mm dia U-PVC SWR pipes
200
492
98580
... More
110mm U-PVC door bend
20
293
5872
... More
110mm U-PVC door Tee
26
386
10036
... More
110mm U-PVC plain Tee
10
322
3227
... More
110mm dia U-PVC offset without ear
13
407
5296.2
... More
110mm U-PVC plain bend
33
232
7656
... More
110mm U-PVC vent cowl
13
58
756.6
... More
110mm dia U-PVC 'P' trap
22
497
10940.6
... More
110mm dia U-PVC socket plain
15
160
2401.5
... More
75mm dia U-PVC socket plain
10
81
813
... More
PVC Clamp
40
42
1712
... More
Supplying all materials, labour, T and P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge(Nycer,parryware make) 580mm size Orissa pan(Hindware/Parryware/Neycer)
18
2405
43290
... More
Supplying all materials, labour, T and P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge Under counter basin(Hindware)No.10095+ALD-CHR-709+ALD-CHR-803AB+KUB-35001F
16
6476
103616
... More
Supplying all materials, labour, T and P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge 600mm x 450mm size B.E mirror
1
670
670.5
... More
Mirror of best quality of 2100mmx600mm
5
1864
9321.5
... More
Supplying all materials, labour, T and P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 600 x 125mm plate glass shelf with CP guard rails ( Jaquar/Parreware -AKP-3577P)
1
2107
2107.8
... More
Supplying all materials, labour, T and P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mm x 600mm long CP towel rail (Jaquar/Parreware -ACN-111SM)
1
1602
1602
... More
CP towel Ring(Jaquar/Parreware -ACN-1121N)
16
1327
21233.6
... More
Supplying all materials, labour, T and P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder ( Jaquar/Parreware -ACN-1131N)
19
926
17607.3
... More
Supplying all materials, labour, T and P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge 600 x 450 x 250mm size Porcelain sink (Jayana make )
6
4914
29486.4
... More
Supplying all materials labour T and P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor L Toilet 1x5.97x4.06x0.30= G. Toilet 1x5.97x3.48x0.30= PWD. Toilet 1x3.23x2.40x0.30=
15.83
1331
21072.9
... More
Supplying all materials, labour, T and P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor L Toilet 1x5.97x4.06x0.10= G. Toilet 1x5.97x3.48x0.10= PWD. Toilet 1x3.23x2.40x0.10=
5.28
6022
31797.22
... More
Supply of all materials and laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1"6" in wall including cleaning,applying and mending as per specification including cost,conveyance,taxes,royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge.(Sqm) In Ist Floor (sunkeen floor)L Toilet 1x5.97x4.06 G. Toilet 1x5.97x3.48PWD. Toilet 1x3.23x2.40 (sunkeen Wall)L' Toilet 1x2x(5.97+4.06)x0.45 G' Toilet 1x2x(5.97+3.48)x0.45 PWD Toilet 1x2x(2.40+3.23)x0.45
75.38
837
63145.83
... More
Supplying all materials, labour, T and P and providing and filling cynder including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In FirstFloor floor L Toilet 1x3.75x2.50x0.15= G. Toilet 1x5.20x2.66x0.15= PWD. Toilet 1x2.40x2.66x0.15=
4.44
555
2467.53
... More
Supplying all materials, labour, T and P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F and P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
10
1870
18701
... More
Supplying all materials, labour, T and P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inside size 760mm x 760mm x 460mm
10
11322
113223
... More
Fitting and fixing RCPC cover slab (0.45m dia)
10
1250
12500
... More
EXTERNAL PH WORK Sinking of 200mmx150mm dia tube well -1 No. Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore onlyDrilling of 200mm dia bore 00 mtr to 45mtr
45
782
35217
... More
Drilling of 150mm dia bore 46 mtr to 120mtr
65
782
50869
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. Lowering of 200mm dia P.V.C casing pipes 00 mtr to 45 mtrs
60
180
10830
... More
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 200mm dia PVC (sch-80) pipe
60
2330
139800
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By DTH Rig
1
6586
6586
... More
Supplying all materials and labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied by the Department) Sanitary sealing upto 5 mtrs below ground level Labour charges
1
1173
1173.1
... More
C.C(1:2:4)
0.2
6319
1263.94
... More
Supplying all materials, labour, T and P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge 40mm HDPE pipes
60
147
8832
... More
Supplying all materials, labour, T and P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Bore well protection chamber.
1
11515
11515.5
... More
Supply all materials, labour, T and P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge. 3HP Three Phase 5 stage submersible pump set.
2
24391
48783
... More
DOL control panel
2
3805
7611
... More
50mm S. S. Nipple, S. S. bolt and clips
4
1000
4000
... More
50mm M. S. Clamp, Bend, Socket and 200mm M. S. well cap
2
1200
2400
... More
2.50mm Sqm Submersible flat cable
200
128
25620
... More
Steel rope with cover
200
26
5340
... More
20mm dia rigid U-PVC pipe
100
6
690
... More
50mm dia HDPE pipe
200
181
36360
... More
Labour charges for lowering, testing, commissioning and transportation to site etc.
2
2000
4000
... More
Supplying all materials, labour, T and P and providing and laying in trenches PVC ASTM pipe of the following nominal bore, tube fittings, testing all complete as per specification and direction of the Engineer in charge 50mm dia PVC ASTM Pipe
200
444
88920
... More
Supplying all materials, labour, T and P and providing and fixing to wall or ceiling and floor CPVC pipes of the following nominal bore and pipe fittings with clamps including making good the wall and testing as per specification and direction of the Engineer in charge50mm dia CPVC pipe (sch-80)
200
1106
221320
... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge. 200m x 0.45m x 0.60m
54
298
16108.2
... More
Supplying all materials, labour T and P and fitting and fixing brass/CP/PVC fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.40mm dia Brass N. R. Valve
3
2884
8654.4
... More
40mm dia Brass F. W. Valve
3
2554
7663.5
... More
Supplying all materials, labour, T and P and construction of Fullway valve chamber/Stop cock chamber of the following inside size for fullway valve with cement concrete slab (1:2:4) mix , 7.50cm thick, foundation concrete (1:5:10) and inside plastering with cement mortar (1:3) finished with a floating coat of neat cement including curing etc all complete as per approved specification and direction of the Engineer in chargeInside size 250mm x 250mm x 560mm
3
1811
5433.3
... More
Supplying all materials, labour, T and P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in chargeInside size 910mm x 910mm x 910mm
4
22026
88107.6
... More
Addl depth
2
3297
6595.8
... More
Supplying all materials, labour, T and P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.22m dia x 2.10m deep soakway pit
2
21804
43609.2
... More
Supplying all materials, labour, T and P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia u-pvc pipe alround concrete
100
1397
139750
... More
Construction of Pump House (size 3.5x2.50x3.0) over U G R Supplying all materials, labour, T and P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In G.Floor, Room floor 3.5x2.5x0.05
0.44
7655
3368.51
... More
Supplying all materials, labour, T and P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In Superstructure Long wall(a) 2x3.50x0.25x2.70 Deduction for Door 1x0.90x2.10x0x25 windows 2x0.90x1.20x0.25
7.09
5893
41787.04
... More
Supplying all materials, labour, T and P and providing 12mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In G.floor Pump house wall inside 1x2(3.50+2.50)x3.0 Ceiling 3.5x2.5 wall outside 1x2(4.0+3.0)x3.50 Roof slab Top 1x4.25x3.25 Roof slab Sides 1x2x(4.25+3.25)x0.25
111.31
195
21783.37
... More
Supplying all materials, labour, T and P and providing cement concrete M25 with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In G.floorColumn 4x0.25x0.25x3.0 Lintel Beam 2x4.0x0.25x0.152x2.5x0.25x0.15 Roof Beam 2x4.0x0.25x0.25 2x2.5x0.25x0.25 Door Chajja 1x1.20x0.80x0.06 Window Chajja 2x1.20x0.80x0.06 Roof slab 1x4.25x3.25x00.125
6.54
4318
28240.37
... More
Supplying all materials, labour, T and P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor Column 4x0.25x0.25x3.0 Lintel Beam 2x4.0x0.25x0.15 2x2.5x0.25x0.15 Roof Beam 2x4.0x0.25x0.25 2x2.5x0.25x0.25Door Chajja 1x1.20x0.80x0.06 Window Chajja 2x1.20x0.80x0.06Roof slab 1x4.25x3.25x00.125
5.89
8898
52412.75
... More
Supplying all materials, labour, T and P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specif ication and direction of the Engineer in charge R.C.C Column and beam In ground floor Column 4x4x0.25x3.0 Lintel Beam out side 2x(4.0+3.0)x0.15 Inside 2x(3.50+2.50)x0.15 Roof Beam out side 2x(4.0+3.0)x0.25 Inside 2x(3.50+2.50)x0.25
22.4
323
7239.68
... More
R.C.C Floor and roof slab Door Chajja 1x1.20x0.80 1x(1.2+0.8+0.8)x0.06 Window Chajja 2x1.20x0.80 ceiling 2x(1.20+0.80+0.80)x0.06 Roof slab Ceiing 3.50x2.50 Sides 1x2x(4.0+3.0)x0.25
15.64
755
11808.2
... More
Construction of 50 users RCC septic tank- 1 No. Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge. 1x6.80x2.74x1.50=27.95
27.95
298
8337.49
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. 1x6.80x2.74x0.30=5.59
5.59
309
1728.99
... More
Supplying all materials, labour, T and P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.1x6.50x2.37x0.20=3.08
3.08
1331
4100.1
... More
Supplying all materials, labour, T and P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor 1x6.50x2.37x0.20=3.08
3.08
6022
18548.38
... More
Supplying all materials, labour, T and P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside)I/S-1x(5.00+1.60)x2.40=15.84
15.84
218
3465.79
... More
Supplying all materials, labour, T and P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside) I/S-1x(5.00+1.60)x2.40=15.84
15.84
40
643.1
... More
Supplying all materials, labour, T and P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs up to 4.30m height I/S-1x5.00x1.60=8.00 Buffle wall-1x2x1.60x0.732=2.34
10.34
755
7806.7
... More
R.C.C wall etc. I/S-1x2x(5.00+1.60)x2.40=31.68 O/S-1x2(5.80+2.40)x2.55=41.82
73.5
1066
78365.7
... More
Supplying all materials, labour, T and P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and directi on of the Engineer in charge In ground floor
9.39
8754
82202.88
... More
Supplying all materials, labour, T and P and providing cement concrete M25 with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor Base-1x5.80x2.40x0.125=1.74 Slab-1x5.50x2.10x0.13=1.50 Wall-1x14.20x0.25x2.40=8.52
11.76
4318
50780.86
... More
Construction of 20000 Liters RCC Under ground Reserver of Inside size- 4.00 X 3.00 X2.00m Earth work in All kinds of soil and gravels mixed with stone and boulder not exceeding 0.014 Cum in volume within 50m initiallead and 1.5 m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per specification approved by the Department. UGR - 1x5.90x4.90x1.50
43.37
298
12937.27
... More
-do- with Ist additional depth of 1.50 m over the initial lead and lift UGR - 1x5.90x4.90x0.70
20.24
309
6260.23
... More
Supplying all materials, labour, T and P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge. UGR - 1x5.90x4.90x0.20
5.78
1331
7694.34
... More
Supplying all materials, labour, T and P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge UGR - 1x4.70x3.70x0.10
1.74
6022
10478.63
... More
Supplying all materials, labour,T and P and providing cement concrete M25 for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete. Base slab 1x4.70x3.70x0.20 Long wall - 2x4.40x0.20x2.0 Short wall- 2x3.00x0.20x2.0 Roof Slab - 1x4.40x3.40x0.15
11.64
4318
50262.68
... More
Supplying all materials, labour, T and P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage. @ 90 kg / cum =
10.48
8898
93257.33
... More
Supplying all materials, labour, T and P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor. RCC floor roof, chajja etc Roof Slab- 1x4.0x3.0 Sides - 2x(4.40+3.40)x0.15 Sides - 2x(4.40+3.40)x0.15
14.34
755
10826.7
... More
RCC wall and Fins etc Long wall inside - 2x4.00x2.0 Long wall out side - 2x4.40x2.0 Short wall inside - 2x3.0x2.0Short wall out side - 2x3.40x2.0
59.2
1066
63119.04
... More
RCC Plinth bend/ Raft Base slab 2(4.7+3.7)x0.50
8.4
272
2284.8
... More
Supplying all materials, labour,T and P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site. Bottom - 1x4.0x3.0 Wall - 2(4.0+3.0)x2.00
40
213
8532
... More
Supplying all materials, labour, T and P and providing cement punning including watering, curring and conveyance of all materials to site. Quantity same as item No-4
40
40
1624
... More
Providing fitting and fixing CI/MS step iron including fixing to wall etc. complete
4
260
1040
... More
Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge
1
1250
1250
... More
Supply all materials, labour, T and P and providing, fitting and fixing of centrifugal pump set to run on 3phase/1phase line voltage ranging from 320 volt to 450 volt with suitable control pannel, jointing with GI/ PVC/ HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge. 3HP 3 phase Monoblock Centrifugal pump set.
2
24391
48783
... More
DOL control panel
2
3805
7611
... More
Labour charges for lowering, testing, commissioning and transportation to site etc.
2
2000
4000
... More
2.50mm Sqm Submersible flat cable
200
128
25620
... More
Steel rope with cover
200
26
5340
... More
20mm dia rigid U-PVC pipe
100
6
690
... More
50mm dia HDPE pipe
200
181
36360
... More
2.50mm Sqm Submersible flat cable
200
128
25620
... More
Steel rope with cover
200
26
5340
... More
20mm dia rigid U-PVC pipe
100
6
690
... More
50mm dia HDPE pipe
200
181
36360
... More
GIRLS HOSTEL A- Internal PH Work Supplying all materials, labour,T and Pand providing and fixing to wall or ceiling and floor Chlorinated Polyvinyl Chloride (C-PVC) pipes (Make-Astral/Finolex) conforming to IS:15778,having thermal stability for hot and cold water supply , including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Ground Floor 20mm dia C-PVC pipe
30
273
8202
... More
25mm dia C-PVC pipe
30
361
10851
... More
32mm dia C-PVC pipe
30
534
16038
... More
40mm dia C-PVC pipe
30
722
21663
... More
In 1st Floor 20mm dia C-PVC pipe
30
284
8541
... More
25mm dia C-PVC pipe
30
373
11190
... More
32mm dia C-PVC pipe
30
547
16428
... More
40mm dia C-PVC pipe
10
738
7387
... More
In 2nd Floor 25mm dia C-PVC pipe
30
384
11529
... More
32mm dia C-PVC pipe
30
560
16818
... More
40mm dia C-PVC pipe
15
755
11331
... More
Supplying all materials, labour, T and P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mm thick wall in Ground floor
15
63
945
... More
In 1st Floor
15
64
961.5
... More
In 2nd Floor
10
65
653
... More
Supplying all materials, labour, T and P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor
10
212
2127
... More
In 1st Floor
10
213
2137
... More
Supplying all materials, labour, T and P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor
45
223
10057.5
... More
In 1st Floor
45
230
10372.5
... More
Supplying all materials, labour, T and P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall in 1st Floor to 5th Floor
20
254
5086
... More
Supplying all materials, labour, T and P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar/Parreware make)
17
1615
27468.94
... More
15mm dia CP CP Angle stop cock (Jaquar/Parreware-Con-CHR-053KN)
18
995
17915.4
... More
15mm dia CP extension piece
43
59
2549.9
... More
15mm dia CP Pillar cock (Jaquar/Parreware-Con-CHR-011KN )
7
1358
9508.1
... More
25mm dia G.M or Brass F.W valve (Sakti make)
4
933
3735.2
... More
32mm dia G.M or Brass F.W valve (Sakti make)
4
1367
5470.4
... More
40mm dia G.M or Brass F.W valve (Sakti make)
2
1367
2735.2
... More
125mm dia CP gratings
12
84
1009.2
... More
Supplying all materials, labour, T and P and fitting and fixing 12.50 litres/10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge 10 litres PVC L.L. Cistern (Slimline-white)
9
1702
15326.1
... More
Supplying all materials,labour,T and P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge 2000 Ltr PVC water storage tank (3 Layer White)-on 2nd. Floor
4
43279
173116
... More
Supplying all materials, labour, T and P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV/80 SS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge. Aquaguard cooler cum purifier(Aqualguard pure chill 80 SS UV)
2
87838
175676.8
... More
Supplying all materials, labour, T and P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings (Make-Supreme/Finolex) of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge. 75mm dia U-PVC SWR pipes
15
338
5074.5
... More
75mm U-PVC plain bend
8
184
1472
... More
110mm dia U-PVC SWR pipes
200
492
98580
... More
110mm U-PVC door bend
20
293
5872
... More
110mm U-PVC door Tee
26
386
10036
... More
110mm U-PVC plain Tee
10
322
3227
... More
110mm dia U-PVC offset without ear
13
407
5296.2
... More
110mm U-PVC plain bend
33
232
7656
... More
110mm U-PVC vent cowl
13
58
756.6
... More
110mm dia U-PVC 'P' trap
22
497
10940.6
... More
110mm dia U-PVC socket plain
15
160
2401.5
... More
75mm dia U-PVC socket plain
10
81
813
... More
PVC Clamp
40
42
1712
... More
Supplying all materials, labour, T and P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge(Nycer,parryware make) 580mm size Orissa pan(Hindware/Parryware/Neycer)
8
2549
20392.8
... More
Supplying all materials, labour, T and P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge Under counter basin(Hindware)No.10095+ALD-CHR-709+ALD-CHR-803AB+KUB-35001F
6
6476
38856
... More
550mm x 400mm size W. H. Basin with Porcelain Pedestal (Parryware/Hindware/Neycer)
1
5777
5777.2
... More
Supplying all materials, labour, T and P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge 600mm x 450mm size B.E mirror
1
759
759.4
... More
Mirror of best quality of 2100mmx600mm
3
1864
5592.9
... More
Supplying all materials, labour, T and P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 600 x 125mm plate glass shelf with CP guard rails ( Jaquar/Parreware -AKP-3577P)
1
2107
2107.8
... More
Supplying all materials, labour, T and P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mm x 600mm long CP towel rail (Jaquar/Parreware -ACN-111SM)
1
1602
1602
... More
CP towel Ring(Jaquar/Parreware -ACN-1121N)
7
1327
9289.7
... More
Supplying all materials, labour, T and P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder ( Jaquar/Parreware -ACN-1131N)
14
926
12973.8
... More
Supplying all materials, labour, T and P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge 600 x 450 x 250mm size kitchen S S sink (Jayana/Nirali or Equevalent make)
2
4914
9828.8
... More
Supplying all materials labour T and P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor Toilet 1x6.65x3.75x0.30= Kitchen Toilet 1x2.43x1.45x0.30=
8.54
1331
11368.45
... More
Supplying all materials, labour, T and P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor Toilet 1x6.65x3.65x0.30= Kitchen Toilet 1x2.43x1.45x0.30=
8.54
6022
51429.59
... More
Supply of all materials and laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1"6" in wall including cleaning,applying and mending as per specification including cost,conveyance,taxes,royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge.(Sqm) In Ist Floor (sunkeen floor)Toilet 1x6.65x3.75x0.30= (sunkeen Wall)Toilet 1x2x(6.65+3.75)x0.45
16.84
837
14106.87
... More
Supplying all materials, labour, T and P and providing and filling cynder including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In FirstFloor floor Toilet 1x6.65x3.75x0.20=
4.99
555
2773.19
... More
Supplying all materials, labour, T and P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F and P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in chargeGully trap chamber of size 250mmx250mm with R.C.C cover slab
6
1870
11220.6
... More
Supplying all materials, labour, T and P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in chargeInside size 760mm x 760mm x 460mm
10
11322
113223
... More
Fitting and fixing RCPC cover slab (0.45m dia)
10
1250
12500
... More
EXTERNAL PH WORK Sinking of 200mmx150mm dia tube well -1 No.Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only Drilling of 200mm dia bore 00 mtr to 45mtr
45
782
35217
... More
Drilling of 150mm dia bore 46 mtr to 120mtr
65
782
50869
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. Lowering of 200mm dia P.V.C casing pipes 00 mtr to 45 mtrs
60
180
10830
... More
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.200mm dia PVC (sch-80) pipe
60
2330
139800
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By DTH Rig
1
6586
6586
... More
Supplying all materials and labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied by the Department) Sanitary sealing upto 5 mtrs below ground level Labour charges
1
1173
1173.1
... More
C.C(1:2:4)
0.2
6319
1263.94
... More
Supplying all materials, labour, T and P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge40mm HDPE pipes
60
147
8832
... More
Supplying all materials, labour, T and P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Bore well protection chamber.
1
11515
11515.5
... More
Supply all materials, labour, T and P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge. 3HP Three Phase 5 stage submersible pump set.
1
24391
24391.5
... More
3HP Three Phase mono block centrifugal submersible pump set.
1
24391
24391.5
... More
DOL control panel
2
3805
7611
... More
50mm S. S. Nipple, S. S. bolt and clips
2
1000
2000
... More
50mm M. S. Clamp, Bend, Socket and 200mm M. S. well cap
1
1200
1200
... More
2.50mm Sqm Submersible flat cable
125
128
16012.5
... More
Steel rope with cover
125
26
3337.5
... More
20mm dia rigid U-PVC pipe
75
6
517.5
... More
50mm dia HDPE pipe
75
181
13635
... More
Labour charges for lowering, testing, commissioning and transportation to site etc.
2
2000
4000
... More
Supplying all materials, labour, T and P and providing and fixing to wall or ceiling and floor PVC pipes of the following nominal bore and pipe fittings with clamps including making good the wall and testing as per specification and direction of the Engineer in charge 50mm dia PVC pipe (sch-80)
150
444
66690
... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge. 150m x 0.45m x 0.60m
20.75
298
6189.73
... More
Supplying all materials, labour T and P and fitting and fixing brass/CP/PVC fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.40mm dia Brass N. R. Valve
1
2884
2884.8
... More
40mm dia Brass F. W. Valve
1
2554
2554.5
... More
Supplying all materials, labour, T and P and construction of Fullway valve chamber/Stop cock chamber of the following inside size for fullway valve with cement concrete slab (1:2:4) mix , 7.50cm thick, foundation concrete (1:5:10) and inside plastering with cement mortar (1:3) finished with a floating coat of neat cement including curing etc all complete as per approved specification and direction of the Engineer in charge Inside size 250mm x 250mm x 560mm
1
1811
1811.1
... More
Supplying all materials, labour, T and P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inside size 910mm x 910mm x 910mm
2
20948
41897.8
... More
Addl depth
1
3212
3212.6
... More
Supplying all materials, labour, T and P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.22m dia x 2.10m deep soakway pit
2
21804
43609.2
... More
Supplying all materials, labour, T and P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia u-pvc pipe alround concrete
60
1397
83850
... More
160mm dia u-pvc pipe alround concrete
20
2246
44928.8
... More
Construction of 50 users RCC septic tank- 1 No. Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.1x6.80x2.74x1.50=27.95
27.95
298
8337.49
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.1x6.80x2.74x0.30=5.59
5.59
309
1728.99
... More
Supplying all materials, labour, T and P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.1x6.50x2.37x0.20=3.08
3.08
779
2400.55
... More
Supplying all materials, labour, T and P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor1x6.50x2.37x0.20=3.08
3.08
6022
18548.38
... More
Supplying all materials, labour, T and P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside) I/S-1x(5.00+1.60)x2.40=15.84
15.84
213
3378.67
... More
Supplying all materials, labour, T and P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside) I/S-1x(5.00+1.60)x2.40=15.84
15.84
40
643.1
... More
Supplying all materials, labour, T and P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs up to 4.30m height I/S-1x5.00x1.60=8.00 Buffle wall-1x2x1.60x0.732=2.34
10.34
755
7806.7
... More
R.C.C wall etc.I/S-1x2x(5.00+1.60)x2.40=31.68 O/S-1x2(5.80+2.40)x2.55=41.82
73.5
1065
78314.25
... More
Supplying all materials, labour, T and P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
9.39
8754
82202.88
... More
Supplying all materials, labour, T and P and providing cement concrete M25 with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor Base-1x5.80x2.40x0.125=1.74 Slab-1x5.50x2.10x0.13=1.50 Wall-1x14.20x0.25x2.40=8.52
11.76
4318
50780.86
... More
Construction of Pump House (size 3.5x2.50x3.0) over U.G.R Supplying all materials, labour, T and P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In G.Floor,Room floor3.5x2.5x0.05
0.44
7655
3368.51
... More
Supplying all materials, labour, T and P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn Superstructure Long wall(a) 2x3.50x0.25x2.70 Shortwall(a) 2x2.50x0.25x2.70 Deduction for Door 1x0.90x2.10x0x25 windows 2x0.90x1.20x0.25
7.09
5893
41787.04
... More
Supplying all materials, labour, T and P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn G.floor Pump house wall inside 1x2(3.50+2.50)x3.0 Ceiling 3.5x2.5 wa ll outside 1x2(4.0+3.0)x3.50 Roof slab Top 1x4.25x3.25 Roof slab Sides 1x2x(4.25+3.25)x0.25
111.31
213
23742.42
... More
Supplying all materials, labour, T and P and providing cement concrete M25 with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn G.floor Column 4x0.25x0.25x3.0 Lintel Beam 2x4.0x0.25x0.15 2x2.5x0.25x0.15 Roof Beam 2x4.0x0.25x0.25 2x2.5x0.25x0.25 Door Chajja 1x1.20x0.80x0.06 Window Chajja 2x1.20x0.80x0.06 Roof slab 1x4.25x3.25x00.125
6.54
4318
28240.37
... More
Supplying all materials, labour, T and P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor Column 4x0.25x0.25x3.0 Lintel Beam 2x4.0x0.25x0.15 2x2.5x0.25x0.15 Roof Beam 2x4.0x0.25x0.25 2x2.5x0.25x0.25 Door Chajja 1x1.20x0.80x0.06 Window Chajja 2x1.20x0.80x0.06 Roof slab 1x4.25x3.25x00.125
5.89
8898
52412.75
... More
Supplying all materials, labour, T and P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C Column and beam In ground floor Column 4x4x0.25x3.0 Lintel Beam out side 2x(4.0+3.0)x0.15 Inside 2x(3.50+2.50)x0.15 Roof Beam out side 2x(4.0+3.0)x0.25 Inside 2x(3.50+2.50)x0.25
22.4
754
16891.84
... More
R.C.C Floor and roof slab Door Chajja 1x1.20x0.80 1x(1.2+0.8+0.8)x0.06 Window Chajja 2x1.20x0.80 ceiling 2x(1.20+0.80+0.80)x0.06
15.64
755
11808.2
... More
Construction of 20000 Liters RCC Under ground Reserver of Inside size- 4.00 X 3.00 X2.00m Earth work in All kinds of soil and gravels mixed with stone and boulder not exceeding 0.014 Cum in volume within 50m initiallead and 1.5 m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per specification approved by the Department. UGR - 1x5.90x4.90x1.50
43.37
298
12937.27
... More
UGR - 1x5.90x4.90x0.70
20.24
309
6260.23
... More
Supplying all materials, labour, T and P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge. UGR - 1x5.90x4.90x0.20
5.78
1331
7694.34
... More
Supplying all materials, labour, T and P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge UGR - 1x4.70x3.70x0.10
1.74
6022
10478.63
... More
Supplying all materials, labour,T and P and providing cement concrete M25 for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete. Base slab 1x4.70x3.70x0.20 Long wall - 2x4.40x0.20x2.0 Short wall- 2x3.00x0.20x2.0 Roof Slab - 1x4.40x3.40x0.15
11.64
4318
50262.68
... More
Supplying all materials, labour, T and P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage. @ 90 kg / cum =
10.48
8898
93257.33
... More
Supplying all materials, labour, T and P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor. RCC floor roof, chajja etc Roof Slab- 1x4.0x3.0 Sides - 2x(4.40+3.40)x0.15
14.34
754
10813.79
... More
RCC wall and Fins etc Long wall inside - 2x4.00x2.0 Long wall out side - 2x4.40x2.0 Short wall inside - 2x3.0x2.0 Short wall out side - 2x3.40x2.0
59.2
1066
63119.04
... More
RCC Plinth bend/ Raft Base slab 2(4.7+3.7)x0.50
8.4
272
2284.8
... More
Supplying all materials, labour,T and P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyanc e of all materials to site. Bottom - 1x4.0x3.0 Wall - 2(4.0+3.0)x2.00
40
221
8852
... More
Supplying all materials, labour, T and P and providing cement punning including watering, curring and conveyance of all materials to site. Quantity same as item No-4
40
40
1624
... More
Providing fitting and fixing CI/MS step iron including fixing to wall etc. complete
4
260
1040
... More
Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge
1
1250
1250
... More
Supply all materials, labour, T and P and providing, fitting and fixing of centrifugal pump set to run on 3phase/1phase line voltage ranging from 320 volt to 450 volt with suitable control pannel, jointing with GI/ PVC/ HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge. 3HP 3 phase Monoblock Centrifugal pump set.
2
24391
48783
... More
DOL control panel
2
3805
7611
... More
Labour charges for lowering, testing, commissioning and transportation to site etc.
2
2000
4000
... More
BOYS HOSTEL A- Internal PH Work Supplying all materials, labour,T and Pand providing and fixing to wall or ceiling and floor Chlorinated Polyvinyl Chloride (C-PVC) pipes (Make-Astral/Finolex) conforming to IS:15778,having thermal stability for hot and cold water supply , including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Ground Floor 20mm dia C-PVC pipe
30
273
8202
... More
25mm dia C-PVC pipe
30
361
10851
... More
32mm dia C-PVC pipe
30
534
16038
... More
40mm dia C-PVC pipe
20
722
14442
... More
In 1st Floor 20mm dia C-PVC pipe
30
284
8541
... More
25mm dia C-PVC pipe
30
373
11190
... More
32mm dia C-PVC pipe
30
547
16428
... More
40mm dia C-PVC pipe
10
738
7387
... More
In 2nd Floor 25mm dia C-PVC pipe
30
384
11529
... More
32mm dia C-PVC pipe
30
560
16818
... More
40mm dia C-PVC pipe
10
755
7554
... More
Supplying all materials, labour, T and P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mm thick wall in Ground floor
15
63
945
... More
In 1st Floor
15
64
961.5
... More
In 2nd Floor
10
65
653
... More
Supplying all materials, labour, T and P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor
10
212
2127
... More
In 1st Floor
10
213
2137
... More
Supplying all materials, labour, T and P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor
45
223
10057.5
... More
In 1st Floor
45
230
10372.5
... More
Supplying all materials, labour, T and P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall in 1st Floor to 5th Floor
20
254
5086
... More
Supplying all materials, labour, T and P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar/Parreware make)
17
1615
27468.94
... More
15mm dia CP CP Angle stop cock (Jaquar/Parreware-Con-CHR-053KN)
20
995
19906
... More
15mm dia CP extension piece
37
59
2194.1
... More
15mm dia CP Pillar cock (Jaquar/Parreware-Con-CHR-011KN )
7
1358
9508.1
... More
25mm dia G.M or Brass F.W valve (Sakti make)
4
933
3735.2
... More
32mm dia G.M or Brass F.W valve (Sakti make)
4
1367
5470.4
... More
40mm dia G.M or Brass F.W valve (Sakti make)
2
1367
2735.2
... More
125mm dia CP gratings
12
84
1009.2
... More
Supplying all materials, labour, T and P and fitting and fixing 12.50 litres/10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge 10 litres PVC L.L. Cistern (Slimline-white)
7
1702
11920.3
... More
Supplying all materials,labour,T and P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge2000 Ltr PVC water storage tank (3 Layer White)-on 2nd. Floor
4
43279
173116
... More
Supplying all materials, labour, T and P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV/80 SS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge. Aquaguard cooler cum purifier(Aqualguard pure chill 80 SS UV)
1
87838
87838.4
... More
Supplying all materials, labour, T and P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings (Make-Supreme/Finolex) of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge. 75mm dia U-PVC SWR pipes
10
338
3383
... More
75mm U-PVC plain bend
8
184
1472
... More
110mm dia U-PVC SWR pipes
100
492
49290
... More
110mm U-PVC door bend
20
293
5872
... More
110mm U-PVC door Tee
26
386
10036
... More
110mm U-PVC plain Tee
10
322
3227
... More
110mm dia U-PVC offset without ear
13
407
5296.2
... More
110mm U-PVC plain bend
33
232
7656
... More
110mm U-PVC vent cowl
13
58
756.6
... More
110mm dia U-PVC 'P' trap
22
497
10940.6
... More
110mm dia U-PVC socket plain
15
160
2401.5
... More
75mm dia U-PVC socket plain
10
81
813
... More
PVC Clamp
40
42
1712
... More
Supplying all materials, labour, T and P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge(Nycer,parryware make) 580mm size Orissa pan(Hindware/Parryware/Neycer)
7
2549
17843.7
... More
Supplying all materials, labour, T and P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge Under counter basin(Hindware)No.10095+ALD-CHR-709+ALD-CHR-803AB+KUB-35001F
6
6476
38856
... More
550mm x 400mm size W. H. Basin with Porcelain Pedestal (Parryware/Hindware/Neycer)
1
5777
5777.2
... More
Supplying all materials, labour, T and P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge 600mm x 450mm size B.E mirror
1
759
759.4
... More
Mirror of best quality of 2100mmx600mm
3
1864
5592.9
... More
Supplying all materials, labour, T and P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 600 x 125mm plate glass shelf with CP guard rails ( Jaquar/Parreware -AKP-3577P)
1
2107
2107.8
... More
Supplying all materials, labour, T and P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mm x 600mm long CP towel rail (Jaquar/Parreware -ACN-111SM)
1
1602
1602
... More
CP towel Ring(Jaquar/Parreware -ACN-1121N)
7
1327
9289.7
... More
Supplying all materials, labour, T and P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder ( Jaquar/Parreware -ACN-1131N)
14
926
12973.8
... More
Supplying all materials, labour, T and P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge. Cost of Flat Back lipped wall urinal
4
1616
6465.6
... More
Supplying all materials, labour, T and P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge 600 x 450 x 250mm size kitchen S S sink (Jayana/Nirali or Equevalent make)
2
4914
9828.8
... More
Supplying all materials labour T and P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor Toilet 1x6.65x3.75x0.30= Kitchen Toilet 1x2.43x1.45x0.30=
8.54
1331
11368.45
... More
Supplying all materials, labour, T and P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor Toilet 1x6.65x3.65x0.30= Kitchen Toilet 1x2.43x1.45x0.30=
8.54
6022
51429.59
... More
Supply of all materials and laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1"6" in wall including cleaning,applying and mending as per specification including cost,conveyance,taxes,royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge.(Sqm) In Ist Floor (sunkeen floor) Toilet 1x6.65x3.75x0.30= (sunkeen Wall) Toilet 1x2x(6.65+3.75)x0.45
16.84
837
14106.87
... More
Supplying all materials, labour, T and P and providing and filling cynder including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In FirstFloor floor Toilet 1x6.65x3.75x0.20=
4.99
555
2773.19
... More
Supplying all materials, labour, T and P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F and P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge Gully trap chamber of size 250mmx250mm with R.C.C cover slab
6
1870
11220.6
... More
Supplying all materials, labour, T and P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inside size 760mm x 760mm x 460mm
7
11322
79256.1
... More
Fitting and fixing RCPC cover slab (0.45m dia)
7
1250
8750
... More
50mm dia PVC pipe (sch-80)
100
444
44460
... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge. EXTERNAL PH WORK Supplying all materials, labour, T and P and providing and fixing to wall or ceiling and floor PVC pipes of the following nominal bore and pipe fittings with clamps including making good the wall and testing as per specification and direction of the Engineer in charge 100m x 0.45m x 0.60m
13.5
298
4027.05
... More
Supplying all materials, labour T and P and fitting and fixing brass/CP/PVC fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. 40mm dia Brass N. R. Valve
1
2884
2884.8
... More
40mm dia Brass F. W. Valve
1
2554
2554.5
... More
Supplying all materials, labour, T and P and construction of Fullway valve chamber/Stop cock chamber of the following inside size for fullway valve with cement concrete slab (1:2:4) mix , 7.50cm thick, foundation concrete (1:5:10) and inside plastering with cement mortar (1:3) finished with a floating coat of neat cement including curing etc all complete as per approved specification and direction of the Engineer in charge Inside size 250mm x 250mm x 560mm
2
1811
3622.2
... More
Supplying all materials, labour, T and P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inside size 910mm x 910mm x 910mm
1
22026
22026.9
... More
Addl depth
1
3297
3297.9
... More
Supplying all materials, labour, T and P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.22m dia x 2.10m deep soakway pit
2
21804
43609.2
... More
Supplying all materials, labour, T and P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia u-pvc pipe alround concrete
80
1397
111800
... More
Construction of 50 users RCC septic tank- 1 No. Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge. 1x6.80x2.74x1.50=27.95
27.95
298
8337.49
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.1x6.80x2.74x0.30=5.59
5.59
309
1728.99
... More
Supplying all materials, labour, T and P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.1x6.50x2.37x0.20=3.08
3.08
1331
4100.1
... More
Supplying all materials, labour, T and P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor 1x6.50x2.37x0.20=3.08
3.08
6022
18548.38
... More
Supplying all materials, labour, T and P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside) I/S-1x(5.00+1.60)x2.40=15.84
15.84
213
3378.67
... More
Supplying all materials, labour, T and P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside) I/S-1x(5.00+1.60)x2.40=15.84
15.84
40
643.1
... More
Supplying all materials, labour, T and P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs up to 4.30m height I/S-1x5.00x1.60=8.00 Buffle wall-1x2x1.60x0.732=2.34
10.34
755
7806.7
... More
R.C.C wall etc. I/S-1x2x(5.00+1.60)x2.40=31.68 O/S-1x2(5.80+2.40)x2.55=41.82
73.5
1065
78314.25
... More
Supplying all materials, labour, T and P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
9.39
8754
82202.88
... More
Supplying all materials, labour, T and P and providing cement concrete M25 with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor Base-1x5.80x2.40x0.125=1.74 Slab-1x5.50x2.10x0.13=1.50 Wall-1x14.20x0.25x2.40=8.52
11.76
4318
50780.86
... More
Construction of 20000 Liters RCC Under ground Reserver of Inside size- 4.00 X 3.00 X2.00m Earth work in All kinds of soil and gravels mixed with stone and boulder not exceeding 0.014 Cum in volume within 50m initiallead and 1.5 m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per specification approved by the Department. UGR - 1x5.90x4.90x1.50
43.37
298
12937.27
... More
UGR - 1x5.90x4.90x0.70
20.24
309
6260.23
... More
Supplying all materials, labour, T and P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge. UGR - 1x5.90x4.90x0.20
5.78
1331
7694.34
... More
Supplying all materials, labour, T and P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeUGR - 1x4.70x3.70x0.10
1.74
6022
10478.63
... More
Supplying all materials, labour,T and P and providing cement concrete M25 for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete.Base slab 1x4.70x3.70x0.20 Long wall - 2x4.40x0.20x2.0 Short wall- 2x3.00x0.20x2.0 Roof Slab - 1x4.40x3.40x0.15
11.64
4318
50262.68
... More
Supplying all materials, labour, T and P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage. @ 90 kg / cum =
10.48
8898
93257.33
... More
Supplying all materials, labour, T and P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.RCC floor roof, chajja etcRoof Slab- 1x4.0x3.0 Sides - 2x(4.40+3.40)x0.15
14.34
754
10813.79
... More
RCC wall and Fins etc Long wall inside - 2x4.00x2.0 Long wall out side - 2x4.40x2.0 Short wall inside - 2x3.0x2.0 Short wall out side - 2x3.40x2.0
59.2
1066
63119.04
... More
RCC Plinth bend/ Raft Base slab 2(4.7+3.7)x0.50
8.4
272
2284.8
... More
Supplying all materials, labour,T and P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site. Bottom - 1x4.0x3.0 Wall - 2(4.0+3.0)x2.00
40
221
8852
... More
Supplying all materials, labour, T and P and providing cement punning including watering, curring and conveyance of all materials to site. Quantity same as item No-4
40
40
1624
... More
Providing fitting and fixing CI/MS step iron including fixing to wall etc. complete
4
260
1040
... More
Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge
1
1250
1250
... More
Supply all materials, labour, T and P and providing, fitting and fixing of centrifugal pump set to run on 3phase/1phase line voltage ranging from 320 volt to 450 volt with suitable control pannel, jointing with GI/ PVC/ HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge. 3HP 3 phase Monoblock Centrifugal pump set.
2
24391
48783
... More
DOL control panel
2
3805
7611
... More
Labour charges for lowering, testing, commissioning and transportation to site etc.
2
2000
4000
... More
Construction of Pump House (size 3.5x2.50x3.0) over U.G.R Supplying all materials, labour, T and P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn G.Floor, Room floor 3.5x2.5x0.05
0.44
7655
3368.51
... More
Supplying all materials, labour, T and P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In Superstructure Long wall(a) 2x3.50x0.25x2.70 Shortwall(a) 2x2.50x0.25x2.70 Deduction for Door 1x0.90x2.10x0x25 windows 2x0.90x1.20x0.25
7.09
5893
41787.04
... More
Supplying all materials, labour, T and P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In G.floor Pump house wall inside 1x2(3.50+2.50)x3.0 Ceiling 3.5x2.5 wall outside 1x2(4.0+3.0)x3.50 Roof slab Top 1x4.25x3.25
111.31
213
23742.42
... More
Supplying all materials, labour, T and P and providing cement concrete M25 with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In G.floor Column 4x0.25x0.25x3.0 Lintel Beam 2x4.0x0.25x0.15 2x2.5x0.25x0.15 Roof Beam 2x4.0x0.25x0.25 Door Chajja 1x1.20x0.80x0.06 Roof slab 1x4.25x3.25x00.125
6.54
4318
28240.37
... More
Supplying all materials, labour, T and P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor Column 4x0.25x0.25x3.0 Lintel Beam 2x4.0x0.25x0.15 2x2.5x0.25x0.15 Roof Beam 2x4.0x0.25x0.25 2x2.5x0.25x0.25 Door Chajja 1x1.20x0.80x0.06 Window Chajja 2x1.20x0.80x0.06 Roof slab 1x4.25x3.25x00.125
5.89
8898
52412.75
... More
Supplying all materials, labour, T and P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C Column and beam In ground floorColumn 4x4x0.25x3.0 Lintel Beam out side 2x(4.0+3.0)x0.15 Inside 2x(3.50+2.50)x0.15 Roof Beam out side 2x(4.0+3.0)x0.25 Inside 2x(3.50+2.50)x0.25
22.4
754
16891.84
... More
R.C.C Floor and roof slab Door Chajja 1x1.20x0.80 1x(1.2+0.8+0.8)x0.06 Window Chajja 2x1.20x0.80 ceiling 2x(1.20+0.80+0.80)x0.06 Roof slab Ceiing 3.50x2.50 Sides 1x2x(4.0+3.0)x0.25
15.64
755
11808.2
... More
SINGLE QUARTER, A- Internal PH WorkSupplying all materials, labour,T and Pand providing and fixing to wall or ceiling and floor Chlorinated Polyvinyl Chloride (C-PVC) pipes (Make-Astral/Finolex) conforming to IS:15778,having thermal stability for hot and cold water supply , including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Ground Floor20mm dia C-PVC pipe
20
272
5458
... More
25mm dia C-PVC pipe
20
361
7224
... More
32mm dia C-PVC pipe
30
534
16020
... More
40mm dia C-PVC pipe
10
722
7221
... More
In 1st Floor 25mm dia C-PVC pipe
15
372
5586
... More
32mm dia C-PVC pipe
20
546
10938
... More
40mm dia C-PVC pipe
10
738
7387
... More
Supplying all materials, labour, T and P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.250mm thick wall in Ground floor
10
61
612
... More
In 1st Floor
6
62
373.8
... More
Supplying all materials, labour, T and P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor
4
211
845.2
... More
Supplying all materials, labour, T and P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor
30
210
6324
... More
Supplying all materials, labour, T and P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall Supplying all materials, labour, T and P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar/Parreware make)
6
1615
9694.92
... More
20mm dia CP consealed stop cock(Con-CHR-083FTK Jaquar/Parreware make)
2
1265
2531.28
... More
15mm dia CP CP Angle stop cock (Jaquar/Parreware-Con-CHR-053KN)
4
995
3981.2
... More
15mm dia CP extension piece
8
59
474.4
... More
15mm dia CP Pillar cock (Jaquar/Parreware-Con-CHR-011KN )
2
1358
2716.6
... More
25mm dia G.M or Brass F.W valve (Sakti make)
4
933
3735.2
... More
32mm dia G.M or Brass F.W valve (Sakti make)
2
1367
2735.2
... More
125mm dia CP gratings
4
84
336.4
... More
15mm CP revolving shower with 15mm x 225mm long CP shower arm(Jaquar/Parreware-OHS-1989)
2
1608
3216.4
... More
Supplying all materials, labour, T and P and fitting and fixing 12.50 litres/10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge10 litres PVC L.L. Cistern (Slimline-white)
2
1702
3405.8
... More
Supplying all materials,labour,T and P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge1000 Ltr PVC water storage tank (3 Layer White)-on 2nd . Floor
2
29962
59924.6
... More
Supplying all materials, labour, T and P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings (Make-Supreme/Finolex) of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge.75mm dia U-PVC SWR pipes(Supreme/Finolex)
10
338
3383
... More
75mm U-PVC plain bend
6
184
1104
... More
110mm dia U-PVC SWR pipes(Supreme/Finolex)
100
492
49290
... More
110mm U-PVC door bend
6
293
1761.6
... More
110mm U-PVC door Tee
6
386
2316
... More
110mm U-PVC plain Tee
6
322
1936.2
... More
110mm dia U-PVC offset without ear
6
407
2444.4
... More
110mm U-PVC plain bshoe end
6
232
1392
... More
110mm U-PVC vent cowl
6
58
349.2
... More
110mm dia U-PVC 'P' trap
6
497
2983.8
... More
110mm dia U-PVC socket plain
10
160
1601
... More
75mm dia U-PVC socket plain
10
81
813
... More
PVC Clamp
25
42
1070
... More
Supplying all materials, labour, T and P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge(Nycer,parryware make) 580mm size Orissa pan(Hindware/Parryware/Neycer)
2
2405
4810
... More
Supplying all materials, labour, T and P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge50mm x 400mm size W. H. Basin with Porcelain Pedestal (Parryware/Hindware/Neycer)
2
7959
15919.5
... More
Supplying all materials, labour, T and P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge600mm x 450mm size B.E mirror
2
670
1341
... More
Supplying all materials, labour, T and P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge600 x 125mm plate glass shelf with CP guard rails ( Jaquar/Parreware -AKP-3577P)
2
2107
4215.6
... More
Supplying all materials, labour, T and P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mm x 600mm long CP towel rail (Jaquar/Parreware -ACN-111SM)
2
1602
3204
... More
CP towel Ring(Jaquar/Parreware -ACN-1121N)
2
1327
2654.2
... More
Supplying all materials, labour, T and P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder ( Jaquar/Parreware -ACN-1131N)
4
926
3706.8
... More
Supplying all materials, labour, T and P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge600 x 450 x 250mm size S/S kitchen sink (Jayana make )
2
4914
9828.8
... More
Supplying all materials labour T and P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor 2x1.20x1.20x0.30=
0.86
1717
1477.05
... More
Supplying all materials, labour, T and P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor 2x1.20x1.20x0.10=
0.29
6645
1927.28
... More
Supplying all materials, labour, T and P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F and P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
4
1870
7480.4
... More
Supplying all materials, labour, T and P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in chargeInside size 760mm x 760mm x 460mm
7
11322
79256.1
... More
Fitting and fixing RCPC cover slab (0.45m dia)
7
1250
8750
... More
EXTERNAL PH WORK Supplying all materials, labour, T and P and providing and fixing to wall or ceiling and floor CPVC pipes of the following nominal bore and pipe fittings with clamps including making good the wall and testing as per specification and direction of the Engineer in charge50mm dia PVC pipe (sch-80)
100
444
44460
... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge. 100m x 0.45m x 0.60m
27
298
8054.1
... More
Supplying all materials, labour, T and P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inside size 910mm x 910mm x 910mm
2
22026
44053.8
... More
Addl depth
1
3297
3297.9
... More
Supplying all materials, labour, T and P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.22m dia x 2.10m deep soakway pit
2
21804
43609.2
... More
Supplying all materials, labour, T and P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia u-pvc pipe alround concrete
50
1397
69875
... More
Construction of 6000 Liters RCC UGR with pump
of Inside size- 3.50 X 2.50 X1.80mEarth work in All kinds of soil and gravels mixed with stone and boulder not exceeding 0.014 Cum in volume within 50m initiallead and 1.5 m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per specification approved by the Department.Construction of 6000 Liters RCC UGR with pump
of Inside size- 3.50 X 2.50 X1.80mEarth work in All kinds of soil and gravels mixed with stone and boulder not exceeding 0.014 Cum in volume within 50m initiallead and 1.5 m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per specification approved by the Department.UGR - 1x2.950x2.65x1.50
11.73
298
3499.06
... More
Supplying all materials, labour, T and P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge. UGR -1x2.950x2.65x0.15
1.17
1331
1557.5
... More
UGR -1x2.950x2.65x0.15
1.17
6022
7045.97
... More
Supplying all materials, labour,T and P and providing cement concrete M25 for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete.Base slab 1x2.95x2.65x0.15 Long wall - 2x2.70x0.15x1.50 Short wall- 2x2.10x0.15x1.50 Roof Slab - 1x2.70x2.40x0.15
4.31
4318
18611.01
... More
Supplying all materials, labour, T and P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage. @ 100 kg / cum =
4.31
8898
38352.97
... More
Supplying all materials, labour, T and P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.RCC floor roof, chajja etc Roof Slab- 1x2.40x2.10 In Sides - 2x(2.4+2.10)x1.50 Out Sides - 2x(2.7+2.40)x1.50
33.84
755
25549.2
... More
Supplying all materials, labour,T and P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyanc e of all materials to site.Bottom - 1x2.40x2.10 Wall inside - 2x(2.4+2.10)x1.50
18.54
213
3954.58
... More
Supplying all materials, labour, T and P and providing cement punning including watering, curring and conveyance of all materials to site. Quantity same as item No-4
18.54
42
787.95
... More
Providing fitting and fixing CI/MS step iron including fixing to wall etc. complete
4
236
945.6
... More
Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge
1
1250
1250
... More
Supply all materials, labour, T and P and providing, fitting and fixing of centrifugal pump set to run on 3phase/1phase line voltage ranging from 320 volt to 450 volt with suitable control pannel, jointing with GI/ PVC/ HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge. 3HP 3 phase Monoblock Centrifugal pump set.
1
24391
24391.5
... More
DOL control panel
1
3805
3805.5
... More
Labour charges for lowering, testing, commissioning and transportation to site etc.
1
2000
2000
... More
2.50mm Sqm Submersible flat cable
80
128
10248
... More
Steel rope with cover
20
26
534
... More
20mm dia rigid U-PVC pipe
30
6
207
... More
50mm dia HDPE pipe
50
181
9090
... More
Construction of 20 users septic tankEarth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.3.29mx2.09mx1.50m=
10.31
298
3075.47
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.3.29mx2.09mx0.63m=
4.33
335
1450.55
... More
Supplying all materials, labour, T and P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor3.29mx2.09mx0.08m=
0.55
6022
3312.21
... More
Supplying all materials, labour, T and P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor3.29mx2.09mx0.15m= 3.13mx1.13mx½(0.03m+0.13m)=
1.24
7655
9493.07
... More
In F and P2(3.09m+1.13m)0.38mx0.70m= 2(2.83m+1.13m)0.25mx1.30m=
4.82
5893
28408.12
... More
In ground floor Inside (1.95m+1.87m)1.13m= 2x2.33mx½(1.95m+1.87m)= Outside2(3.09m+1.89m)0.70m= 2(2.83m+1.63)1.43m=
32.95
213
7028.24
... More
Supplying all materials, labour, T and P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
13.22
40
536.73
... More
Supplying all materials, labour, T and P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs In ground floor 2.30mx1.10m= 2(2.86m+1.66m)0.10m=
3.43
755
2589.65
... More
Supplying all materials, labour, T and P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
0.38
8754
3326.63
... More
Supplying all materials, labour, T and P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor 2.86mx1.66mx0.10m=
0.47
7655
3598.18
... More
Supplying all materials, labour, T and P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
2
350
700
... More
Supplying all materials, labour, T and P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
5
250
1250
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge 2(3.29m+1.89m)0.10mx0.70m= 2(3.29m+1.63m)x0.23mx1.20m=
3.45
198
686.21
... More
FAMILY QUARTERA- Internal PH WorkSupplying all materials, labour,T and Pand providing and fixing to wall or ceiling and floor Chlorinated Polyvinyl Chloride (C-PVC) pipes (Make-Astral/Finolex) conforming to IS:15778,having thermal stability for hot and cold water supply , including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Ground Floor 20mm dia C-PVC pipe
25
272
6822.5
... More
25mm dia C-PVC pipe
40
361
14448
... More
32mm dia C-PVC pipe
35
534
18690
... More
In 1st Floor 20mm dia C-PVC pipe
20
284
5682
... More
25mm dia C-PVC pipe
35
372
13034
... More
Supplying all materials, labour, T and P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mm thick wall in Ground floor
10
61
612
... More
In 1st Floor
10
62
623
... More
In 2nd Floor
10
63
635
... More
Supplying all materials, labour, T and P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor
10
211
2113
... More
In 1st Floor
10
212
2123
... More
Supplying all materials, labour, T and P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor
20
210
4216
... More
In 1st Floor
20
217
4354
... More
Supplying all materials, labour, T and P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall in 1st Floor to 5th Floor
20
236
4734
... More
Supplying all materials, labour, T and P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar/Parreware make)
10
1615
16158.2
... More
20mm dia CP consealed stop cock(Con-CHR-083FTK Jaquar/Parreware make)
6
1265
7593.84
... More
15mm dia CP CP Angle stop cock (Jaquar/Parreware-Con-CHR-053KN)
8
995
7962.4
... More
15mm dia CP extension piece
18
59
1067.4
... More
15mm dia CP Pillar cock (Jaquar/Parreware-Con-CHR-011KN )
2
1358
2716.6
... More
25mm dia G.M or Brass F.W valve (Sakti make)
4
933
3735.2
... More
32mm dia G.M or Brass F.W valve (Sakti make)
2
1367
2735.2
... More
125mm dia CP gratings
12
84
1009.2
... More
15mm CP revolving shower with 15mm x 225mm long CP shower arm(Jaquar/Parreware-OHS-1989)
6
1608
9649.2
... More
Supplying all materials, labour, T and P and fitting and fixing 12.50 litres/10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge10 litres PVC L.L. Cistern (Slimline-white)
6
1702
10217.4
... More
Supplying all materials,labour,T and P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge1000 Ltr PVC water storage tank (3 Layer White)-on 2nd . Floor
2
29962
59924.6
... More
Supplying all materials, labour, T and P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings (Make-Supreme/Finolex) of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge.75mm dia U-PVC SWR pipes
10
338
3383
... More
75mm U-PVC plain bend
8
184
1472
... More
110mm dia U-PVC SWR pipes(
100
492
49290
... More
110mm U-PVC door bend
20
293
5872
... More
110mm U-PVC door Tee
18
386
6948
... More
110mm U-PVC plain Tee
9
322
2904.3
... More
110mm dia U-PVC offset without ear
20
407
8148
... More
110mm U-PVC plain bshoe end
9
232
2088
... More
110mm U-PVC vent cowl
9
58
523.8
... More
110mm dia U-PVC 'P' trap
10
497
4973
... More
110mm dia U-PVC socket plain
20
160
3202
... More
75mm dia U-PVC socket plain
10
81
813
... More
PVC Clamp
35
42
1498
... More
Supplying all materials, labour, T and P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge(Nycer,parryware make)580mm size Orissa pan(Hindware/Parryware/Neycer)
2
2405
4810
... More
Supplying all materials, labour, T and P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge550mm x 400mm size W. H. Basin with Porcelain Pedestal (Parryware/Hindware/Neycer)
2
7959
15919.5
... More
Supplying all materials, labour, T and P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge600mm x 450mm size B.E mirror
2
670
1341
... More
Supplying all materials, labour, T and P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge600 x 125mm plate glass shelf with CP guard rails ( Jaquar/Parreware -AKP-3577P)
2
2107
4215.6
... More
Supplying all materials, labour, T and P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mm x 600mm long CP towel rail (Jaquar/Parreware -ACN-111SM)
6
1602
9612
... More
CP towel Ring(Jaquar/Parreware -ACN-1121N)
2
1327
2654.2
... More
Supplying all materials, labour, T and P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder ( Jaquar/Parreware -ACN-1131N)
12
926
11120.4
... More
Supplying all materials, labour, T and P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge600 x 450 x 250mm size S/S kitchen sink (Jayana make )
4
4914
19657.6
... More
Supplying all materials labour T and P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor 3x1.35x2.10x0.30=
2.55
577
1473.39
... More
Supplying all materials, labour, T and P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor 3x1.35x2.10x0.10=
0.85
6022
5118.87
... More
Supply of all materials and laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1"6" in wall including cleaning,applying and mending as per specification including cost,conveyance,taxes,royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge.(Sqm) In Ist Floor (sunkeen floor)3x1.35x2.10= (sunkeen Wall)3x2x(1.35+2.10)x0.45=
14.72
837
12330.94
... More
Supplying all materials, labour, T and P and providing and filling cynder including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In FirstFloor floor 3x1.35x2.10x0.15=
1.28
555
711.36
... More
Supplying all materials, labour, T and P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F and P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
6
1870
11220.6
... More
Supplying all materials, labour, T and P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in chargeInside size 760mm x 760mm x 460mm
10
11322
113223
... More
Fitting and fixing RCPC cover slab (0.45m dia)
8
1250
10000
... More
EXTERNAL PH WORKSupplying all materials, labour, T and P and providing and laying in trenches PVC ASTM pipe of the following nominal bore, tube fittings, testing all complete as per specification and direction of the Engineer in charge50mm dia PVC ASTM Pipe
100
444
44460
... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge. 100m x 0.45m x 0.60m
27
215
5829.3
... More
Supplying all materials, labour T and P and fitting and fixing brass/CP/PVC fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.40mm dia Brass N. R. Valve
1
2884
2884.8
... More
Supplying all materials, labour, T and P and construction of Fullway valve chamber/Stop cock chamber of the following inside size for fullway valve with cement concrete slab (1:2:4) mix , 7.50cm thick, foundation concrete (1:5:10) and inside plastering with cement mortar (1:3) finished with a floating coat of neat cement including curing etc all complete as per approved specification and direction of the Engineer in chargeInside size 250mm x 250mm x 560mm
1
1679
1679.8
... More
Supplying all materials, labour, T and P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inside size 910mm x 910mm x 910mm
4
22026
88107.6
... More
Addl depth
2
3297
6595.8
... More
Supplying all materials, labour, T and P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.22m dia x 2.10m deep soakway pit
2
21804
43609.2
... More
Supplying all materials, labour, T and P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia u-pvc pipe alround concrete
50
1397
69875
... More
Construction of 20 users septic tankEarth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.3.29mx2.09mx1.50m=
10.31
298
3075.47
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.3.29mx2.09mx0.63m=
4.33
335
1450.55
... More
Supplying all materials, labour, T and P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor3.29mx2.09mx0.08m=
0.55
6022
3312.21
... More
Supplying all materials, labour, T and P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor3.29mx2.09mx0.15m= 3.13mx1.13mx½(0.03m+0.13m)=
1.24
7655
9493.07
... More
Supplying all materials, labour, T and P and providing brick work with fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn F and P2(3.09m+1.13m)0.38mx0.70m= 2(2.83m+1.13m)0.25mx1.30m=
4.82
5893
28408.12
... More
Supplying all materials, labour, T and P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floorInside(1.95m+1.87m)1.13m= 2x2.33mx½(1.95m+1.87m)= Outside 2(3.09m+1.89m)0.70m= 2(2.83m+1.63)1.43m=
32.95
213
7028.24
... More
Supplying all materials, labour, T and P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor
13.22
40
536.73
... More
Supplying all materials, labour, T and P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs In ground floor2.30mx1.10m= 2(2.86m+1.66m)0.10m=
3.43
755
2589.65
... More
Supplying all materials, labour, T and P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor
0.38
8754
3326.63
... More
Supplying all materials, labour, T and P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor 2.86mx1.66mx0.10m=
0.47
7655
3598.18
... More
Supplying all materials, labour, T and P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
2
350
700
... More
Supplying all materials, labour, T and P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
5
250
1250
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge2(3.29m+1.89m)0.10mx0.70m= 2(3.29m+1.63m)x0.23mx1.20m=
3.45
198
686.21
... More
Construction of 6000 Liters RCC UGR WITH PUMPING ARRAGEMENT
of Inside size- 3.50 X 2.50 X1.80m Earth work in All kinds of soil and gravels mixed with stone and boulder not exceeding 0.014 Cum in volume within 50m initiallead and 1.5 m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per specification approved by the Department.UGR - 1x2.950x2.65x1.50
11.73
298
3499.06
... More
Supplying all materials, labour, T and P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.UGR -1x2.950x2.65x0.15
1.17
1331
1557.5
... More
Supplying all materials, labour, T and P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge UGR -1x2.950x2.65x0.15
1.17
6022
7045.97
... More
Supplying all materials, labour,T and P and providing cement concrete M25 for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete. Base slab 1x2.95x2.65x0.15 Long wall - 2x2.70x0.15x1.50 Short wall- 2x2.10x0.15x1.50 Roof Slab - 1x2.70x2.40x0.15
4.31
4318
18611.01
... More
Supplying all materials, labour, T and P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.@ 100 kg / cum =
4.31
8898
38352.97
... More
Supplying all materials, labour, T and P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.RCC floor roof, chajja etcRoof Slab- 1x2.40x2.10 In Sides - 2x(2.4+2.10)x1.50 Out Sides - 2x(2.7+2.40)x1.50
33.84
755
25549.2
... More
Supplying all materials, labour,T and P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.Bottom - 1x2.40x2.10 Wall inside - 2x(2.4+2.10)x1.50
18.54
213
3954.58
... More
Supplying all materials, labour, T and P and providing cement punning including watering, curring and conveyance of all materials to site. Quantity same as item No-4
18.54
42
787.95
... More
Providing fitting and fixing CI/MS step iron including fixing to wall etc. complete
4
236
945.6
... More
Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge
1
1250
1250
... More
Supply all materials, labour, T and P and providing, fitting and fixing of centrifugal pump set to run on 3phase/1phase line voltage ranging from 320 volt to 450 volt with suitable control pannel, jointing with GI/ PVC/ HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.3HP 3 phase Monoblock Centrifugal pump set.
1
24391
24391.5
... More
DOL control panel
1
3805
3805.5
... More
Labour charges for lowering, testing, commissioning and transportation to site etc.
1
2000
2000
... More
2.50mm Sqm Submersible flat cable
80
128
10248
... More
Steel rope with cover
20
26
534
... More
20mm dia rigid U-PVC pipe
30
6
207
... More
50mm dia HDPE pipe
50
181
9090
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements