Rural Development Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 94,41,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_EICCL_54601_4Tender No
CE (B) - 52 / 2018-19Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing & fixing insulation to Hot Water pipes & fittings in accordance with specifications rockwool section pipe 60 kg/m³ density with aluminum cladding of 24 G.
-
-
-
... More
FloorJoint of 150 mm gap
211
-
-
... More
Telephone socket outlet
286
-
-
... More
2ND FL
264
-
-
... More
LT PANELS -INTERNAL
MAIN PANEL
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 35 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
2 Nos. 630 amps 4P, Ics= Icu 25 kA, Moulded Case Circuit Breaker with microprocessor based release with overcurrent and short circuit with ROH.
Metering & Indication for each incomer :
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 600/5 amps 10VA 1 set of ON/OFF indicating light shall be protected by 6A MCB.
-
-
-
... More
5TH FL
2244.78
-
-
... More
BUTTERFLY VALVE (MANUAL) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. (AXIN/ZOLOTO/NVR)
-
-
-
... More
Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators
with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately) etc. complete as per direction of Engineer-in-Charge.
10299
-
-
... More
e. The rate includes interconnecting cables, foundations & foundation bolts
2
-
-
... More
Motorised Butterfly Valves
Supply, installation, testing and commissioning of motorised on / off butterfly valves with modulating motor in return chilled & hot water line of each chiller & Hot Water Generator operated through BMS & of following sizes. Valves shall be insulated as per pipe insulation material & thickness given above.
-
-
-
... More
iii) R.C.C. stairs excluding landing but including railing details for 5 Sqm
-
-
-
... More
80 mm nominal bore
7
-
-
... More
100 mm dia. (32 mm thick insulation)
360
-
-
... More
New work (three or more coats)
846
-
-
... More
Solid handling size for this pump = 20 mm
1
-
-
... More
Ward Vacuum Unit with Regulator, Collection Jar of 600 ml with bracket .(For Wards)
250
-
-
... More
1 core, 120 / 95 Sq.mm.
56
-
-
... More
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
With common burnt clay F.P.S (non modular) bricks of class designation 7.5
10
-
-
... More
150 mm dia
6
-
-
... More
Supplying and installing at approved location approved make fire buckets of 24 gauge galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters “FIRE” in black and gold. Cost shall be inclusive of providing MS stand duly painted over a coat of primer.
15
-
-
... More
DOL Control panel
4
-
-
... More
1st Floor
1608.39
-
-
... More
600 mm width x 75mm depth x 2 mm thickness.
1
-
-
... More
For All Other AHU Supply, installation, testing and commissioning of Proportional cooling / heating, digital display, communicating type thermostat at air-handler. Temperature Sensor for AHUs are also specified in BMS Part. Thermostat shall be installed in case BMS commissioning is significantly delayed.
2
-
-
... More
Chilled / Hot Water Piping With Nitrile Rubber Insulation
Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.
Note:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
-
-
-
... More
150 mm dia (For Chiller)
3
-
-
... More
100 - 200 CFM (8mm static pressure, single phase)
5
-
-
... More
LIGHTING FIXTURES Supply of Recessed Mounted 2'X2' Panel LED comprising of 40W LED with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 100 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job.
412
-
-
... More
80 mm dia
20
-
-
... More
100 mm diameter pipe
125
-
-
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
... More
Supply, Installation, Testing and Commissioning of Manual Release Switch
8
-
-
... More
50 mm dia
2
-
-
... More
Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 :
-
-
-
... More
3.5core, 300 Sq.mm.
3950
-
-
... More
1200 mm length
716
-
-
... More
65mm dia (13 mm thickness)
506
-
-
... More
1st Floor
828.62
-
-
... More
6,000 CFM, 50 mm St. Pr., 4 Row CC, 2 Row HC
1
-
-
... More
Providing and fixing of 250 x 250 x 50 mm deep (Nominal size) wall junction box including providing 2 mm thick Hot deep - galvanized GI steel cover required as per specification.
9
-
-
... More
For 100 mm dia pipe
3099
-
-
... More
Providing and fixing CP Brass floor cleanout plug as per drawing complete with G.I. Socket jointed to drainage pipe outlet with lead caulked joint
-
-
-
... More
Floor Joint of 100 mm gap
432.67
-
-
... More
Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge.
5603
-
-
... More
Supply, installation, testing and commissioning of user Client control software (web based) complete as per spec with valid licenses. The software should enable the user to view multiple cameras in any combination available on the network .
3
-
-
... More
250 mm weighing not less than 150 gms.
82
-
-
... More
Providing and fixing of white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Make : Hindware Cat no.:50002 OR Equivalent as per list of approved make)
-
-
-
... More
65 mm dia
9
-
-
... More
33kV HT PANEL-3 (1 NO. INCOMING & 3 NOS OUTGOING)
Supply, Installation, Testing and Commissioning of indoor type floor mounted metal clad, 33 kV, 1250A VCB Panel with totally enclosed,expendable & electrically interlocked, horizontal drawout, horizontal isolation type breaker as per IS 13118, as per specifications, having capacities as mentioned below, single break, trip free mechanism, manually charged and closing breaker suitable for use on 33kV, 3Phase, 50Hz A.C. supply with short circuit fault level of 750 MVA, complete with self contained electrically interlocked rack in and rack out mechanism, air insulated & encapsulated copper bus bars of 800Amp capacity, breaker featured with mechanical ON/ OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 4NO + 4NC and equipped with following switchgears and accessories i/c connections suitable for 2No.3Cx 400*sq.mm and Outgoing shall be suitable for 3Cx 300*sq.mmas mention in SLD. XLPE 33kV cable (cable entry from bottom, end termination with heat shrinkable jointing material etc. as required . (Note - Cost of end termination not included in this item.)
INCOMER - consisting of followings-
-
-
-
... More
4 core, 6 Sq.mm, Copper Ar. Cable
110
-
-
... More
2nd
2134
-
-
... More
180x150 mm size P type
-
-
-
... More
Supply, Installation, Testing & Commissioning of LC-LC Style SMF 'Fiber Patch Cord 3 Mtr. etc. complete as per Tender specification., UL Listed.
14
-
-
... More
Bus Bars
150 Amps TPN, 25 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
7 Nos. 40A FP MCB, 10 KA breaking capacity.
3 Nos. 25A FP MCB, 10 KA breaking capacity.
-
-
-
... More
4th Floor
775.39
-
-
... More
4th Floor
812.5
-
-
... More
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge.
133
-
-
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape etc. complete as per direction of Engineer-in-Charge.
320
-
-
... More
Copper Pipes used will be solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased, manufactured as per EN 1057 part I, Table-X of 1971 and chemical composition as per BS-6017 of 1981, Table 2, Cu-DHP.,Kite Marked.
-
-
-
... More
Flow Rate : 2.0 LPS
1
-
-
... More
Providing, fitting, fixing vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm plain (Ivory) of approved make as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials all labour,labour cess complete in all respects.
-
-
-
... More
80 mm nominal outer dia Pipes (SCH-40)
942
-
-
... More
3.5 core, 120 Sq.mm.
6
-
-
... More
Cement concrete of proportion (1:4:8) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.
1715
-
-
... More
Providing and fixing of ABS plastic body liquid soap dispenser with push lever assembly complete with soap refill. (Make : JAQUAR:AKP-35735P OR Equivalent as per list of approved make)
46
-
-
... More
Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
MATV,DATA & VOICE SYSTEM SYSTEM
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
1416
-
-
... More
Thermostat for FCU
Supply, installation, testing and commissioning of automatic control for Fan Coil Units consisting of pressure independant balancing cum two way control valve (already quantified herein) & digital thermostat, which will have provision of setting of room temperature, setting of fan speed (High, Medium, Low). The quoted price of thermostat shall include the cost of 20mm MS conduits, control cabling, MS Box etc as required. Thermostats shall be interlocked to prevent simultaneous heating and cooling.
6
-
-
... More
150 mm dia
5
-
-
... More
Supply, Installation, Testing & Commissioning of 24 port L2 Managed switch having port density 24 Nos of 10M/100M/1G RJ45 Port POE ports , 4 Nos of 1G/10G SFP+ Port , 1X console port , Available POE power 370 W , 128 Gbps switching bandwidth , 32K MAC address support , Support L2 feature STP, RSTP ,MSTP . Support 802.1Q VLAN , port based VLAN , 4K VLAN entries , MAC based VLAN , IP subnet based VLAN . Support IEEE 802.3ad LACP . L3 features - static routing , DHCP server , Device Management system - topology view , floor view , map view , dashboard , traffic monitoring , cable diagnostics.CE,FCC certified. (Approved make - Cisco / Impulse / Juniper)
3
-
-
... More
25mm dia (9 mm thickness)
1219
-
-
... More
Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
6
-
-
... More
Supply & laying of 6 SWG GI wire or in recess for loop earthing as required.
1450
-
-
... More
Providing & fixing controlled percolation fire hose pipe (as per IS:8423) of 63 mm dia and 15 meter length rated for brust pressure of 35.7 Kg/sqcm. The hose shall be tested for flame resistance test in accordance to IS:8423. Hose shall be complete with ISI marked brass male & female coupling (IS:903) bound & riveted to hose pipe with copper rivets & 1.5 mm copper wire (Location : External fire hydrant)
14
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 4 Nos. 3 pin 5/6 A modular socket outlet and 4 Nos. 5/ 6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
89
-
-
... More
Supply & instalation of 6 core Indoor/outdoor OM3 Unarmoured Multimode Optical Fiber
750
-
-
... More
7 core, 2.5 Sq.mm. Cu. Conductor cable
250
-
-
... More
3 core, 16 Sq.mm.
10
-
-
... More
Supply, Installation, Testing and Commissioning of stranded ACSR "DOG" Conductor Size : 6/4.72+7/1.57 mm Steel Reinforced (ACSR) confirming to IS:398-1976 ofapproved make, stringing, making off complete with binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required and clearing of obstacles (ifany) etc.
0.01
-
-
... More
H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded .
24
-
-
... More
All necessary insulated interconnecting piping as detailed above, valves, temperature & pressure gauges, internal cabling from control panel to pumps, controllers, sensors, wires & other accessories is deemed to be included in this item & nothing extra in this regard will be paid to the Contractor.
2
-
-
... More
150 mm dia. (32 mm thick insulation)
33
-
-
... More
5th Floor
505
-
-
... More
Providing & fixing GM fire brigade connection (suction collecting head) consisting of 4 No. 63 mm dia instantaneous type male couplings with built-in check valves, 1 No. 150 mm dia sluice valve, 1 No. 150 mm dia non-return valve and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as required and as per IS:904-1963.(MAKE: OMEX/MINIMAX/NEWAGE)
1
-
-
... More
Single outlet faceplate with RJ-45 jack
116
-
-
... More
300 mm width x 50mm depth x 1.6 mm thickness.
2
-
-
... More
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
With 12 mm mild steel U beading
324.1
-
-
... More
P. H. WORK
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (Make : Hindware Cat no.:20004 OR Equivalent as per list of approved make)
-
-
-
... More
Size 100 mm x 100 mm
47
-
-
... More
200 mm dia. (32 mm thick insulation)
70
-
-
... More
Supplying and filling in foundation and plinth with good Earth including watering, ramming with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge
6247
-
-
... More
Supply, Testing & Commissioning, fixing of Addressable Hooter with Strobe lights with 110 cd. Strobes shall be synchronised for better evacuation as per specification complete as required.
59
-
-
... More
3.5core, 300 Sq.mm.
100
-
-
... More
Supplying and laying Providing and fixing 50 mm X 6 mm G.I. strip on surface or in recess for connections etc. as required.
806.1
-
-
... More
VFD System For Cooling Tower Supply, installation, testing and commissioning of VFD having IP-54/55 enclosure from factory with heat sink for each cooling tower fan (10 / 12.5 HP Each, 3 Nos.) with VFD control panel & other accessories as required. VFD control panel shall be installed in the AC Plant Room.
-
-
-
... More
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs for each incomer.
1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 100/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set
Bus Bars
150 Amps TPN, 25 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
5 Nos. 63 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
-
-
-
... More
Y-strainer
-
-
-
... More
225x225mm
4
-
-
... More
Supplying, Installation Testing and commissioning of 33kV Polymer Pint insulator (70KN)
3
-
-
... More
UPS SYSTEM
Supply, installation, Testing and commissioning of the following rating UPS as per Technical Specifications and complete in all respects.
100 KVA UPS 3 phase (415 V + 15%) Volts input & 3 phase output (415 V + 1%), 50 Hz, Input harmonic Current THD =3% typical at 100% load, ,=6% maximum at 50% load with Isolation Transformer and 30 min Battery backup for each UPS along with battery cabinet complete in all respect including supporting steel structure for UPS and Battery as required.UPS shall have facility for parallel operation. Quoted price shall be inclusive of required rating single core copper conductor cable including terminations,connections of UPS to panels, batteries etc complete in all respect and as per direction of Engineer in Charge.
3
-
-
... More
25 to 40 mm nominal bore
250
-
-
... More
Providing of 2 - 3 mm average thick layer of cementations smoothening compound of UZIN NC 149 sh or equivalent as recommended by the Vinyl sheet flooring manufacturer over and including a priming compound of UZIN PE 360 sh or equivalent as recommended by the Vinyl sheet flooring manufacturer and installation team on concrete surface to provide a smooth & homogenous surface for laying of vinyl sheet flooring complete to the entire satisfaction of Engineer-in-charge
607
-
-
... More
Isolation for OT’s described as above.
6
-
-
... More
EMERGENCY PANEL - 3 (3RD & 4TH FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
1 No. 63A FP MCB, 10 KA breaking capacity.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 60/5 amps 10VA 1 set of ON/OFF indicating light shall be protected by 6A MCB.
Bus Bars
100 Amps TPN, 25 kA for 1 sec. Copper bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
10 Nos. 25A DP MCB, 10 KA breaking capcity.
-
-
-
... More
Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
50 mm dia
10
-
-
... More
Pressurised Expansion Tank (Chilled Water)
Supply, installation, testing and commissioning of pressurised insulated chilled water Expansion Tank of capacity as given below made of MS Sheet & finished with epoxy enamel, having interchangeable butile - EPDM membrane, operating pressure 10 Kg/cm² or as actually required, suitable HP pump, pressure switch, valves, make up water connection, overall height of the tank shall be limited to 3.0 meter & the tank shall be complete with necessary controls etc. as required to make it fully functional. The capacity of each tank shall be 2000 Liters approx. Capacity of tank is for the guidance only & AC Contractor to quote as per actual requirement.
1
-
-
... More
Grassing with selection No. 1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately).
-
-
-
... More
Four way (S-4)
7
-
-
... More
Actuator
129
-
-
... More
AHU PANEL - 3 (FOURTH FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
1 No. 250 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 250/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set
Bus Bars
300 Amps TPN, 25 kA for 1 sec. Copper bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
14 Nos. 40A FP Miniature Circuit Breaker, 10 kA breaking capacity.
-
-
-
... More
Factory Fabricated Double Skin Scrubber
Supply, installation, testing and commissioning of factory fabricated Double Skinned Scrubber unit floor mounted type fabricated out of extruded aluminium section with 0.6mm pre-plasticized /pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower, blower section and blower motor TEFC (Motor Efficiency IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, belt drive package, wet section & tank shall be made of 18 G tainless steel. The Scrubber shall be complete with spray arrangement with metallic viscous filter & face velocity across the section shall be limited to 152 MPM. The scrubber shall have an efficiency of 90% & shall be complete with water circulation pump GI B Class interconnecting piping & valves, viscous filters. The scrubber panels shall be insulated with 23mm thick & 36 Kg/m³ density PU foam. The scrubber shall conform to specication given in the tender & shall be of following capacity.
-
-
-
... More
CCTV (IP VIDEO SURVEILLANCE) SYSTEM
-
-
-
... More
40 mm nominal outer dia Pipes
389
-
-
... More
Main Incoming UPS Panel described as above
1
-
-
... More
Rocky terrain with boulder formation for 300m depth
8
-
-
... More
4 x 15 KVA UPS Panel-1 & 2 described as above
2
-
-
... More
The price quoted for supply, installation, testing & commissioning of Rotary Screw Water Chilling Unit shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. as required in Indian Rupees. (2W+1S)
3
-
-
... More
65 mm dia
4
-
-
... More
Supply, installation, testing & commissioning of Flocculator
Quantity 01 number Drive 0.5 HP motor with gear Capacity 10.0 m3/Hour
MOC: MS with FRP lining 1.1 mm inside
1
-
-
... More
For Sprinkler system - MS `C' Heavy class pipe
-
-
-
... More
Primary Chilled Water Pumps Set (2W+1S)
3
-
-
... More
Providing, installation, testing & commissioning of Horizontal / Submersible centrifugal pumps solid handling (min. 20 mm) pumps. The pumps shall be made of CI casing, bronze Impellar, SS shaft & sleeve, Mechanical Seal are connected to a TEFC induction motor mounted on a common channel base frame with coupling guard, 150 mm dia pressure gauge with GM isolation cock, suitable vibration eliminator pads of approved design. Motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary piping, valves and other accessories and concrete foundation complete as required.
-
-
-
... More
Secondary Chilled Water Pumps Set (2W+1S)
3
-
-
... More
600 mm wide x 50 mm x 2 mm
60
-
-
... More
150 mm dia
3
-
-
... More
Theatre Suction Unit, Trolley mounted with 2 nos. 2000ml Collection jars, jar selector unit and Suction Controller .
6
-
-
... More
Supply, installation, testing and commissioning of indoor Fixed dome with discreet and tamper-resistant casing. Varifocal 2.8-10 mm lens with fixed iris. Multiple, individually configurable H.264 and Motion JPEG streams; max HDTV 720p or 1 MP resolution at 30 fps. Video motion detection and active tampering alarm. Power over Ethernet. Midspan not included.The camera shall have sound in facility.
12
-
-
... More
EXTERNAL SEWERAGE AND STORM WATER DRAINAGE
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete:
-
-
-
... More
50 mm Dia
16
-
-
... More
Supply and installation of homogeneous pvc sheet of 2 metre wide and overall thickness of 2mm. The product should be homogeneous and single layered. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC with TRUESHIELD technology, Plasticizers without DOP, Urethane, color pigments and filler calendered to form a sheet. Color and pattern details shall be dispersed throughout the thickness of the wear layer. Medintech Plus shall conform to group "T" wear resistance as per EN 649, Clean Room certified with class 'A' as per ASTMF5100, Flammability resistance of class Bfl-s1 as per GB8624-2006, Dynamic coefficient of friction of class DS as per EN 13893, Thermal Resistance of 0.072m2K/W as per EN 12667, Thermal conductivity of 0.071W/mK as per EN12524, impact sound reduction of 3dB as per ISO 10140, Slip Resistance of class R9 as per DIN 51130, Residual indentation of 0.03mm as per GB/T 4085-2005, Color fastness rating of ≥6 as per ISO 105-B02, total weight being 3.3 kg/m2 as per EN430. The product shall be suitable for applications in class 23/34/43 areas as per EN685. Product shall exhibit antistatic behaviour, resistance to bacteria,resistance to chemical, resistance to staining,suitability to castor chair. The product shall be FloorScore certified with no SVHC content published by European Chemicals Agency(REACH). Product shall contribute to LEED points under Indoor environmental quality(LEED EQ) and Material & Resource (LEED MR) category.
1290
-
-
... More
All kinds of soil
1602
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
15000
-
-
... More
SS Perforated basket screen having provision for chain lifting arrangement etc. complete as required.
1
-
-
... More
4TH FL
123.51
-
-
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required.
262
-
-
... More
6 Kg
54
-
-
... More
Supply, Installation, Testing and Commissioning of Cylinder Bracket
8
-
-
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars atevery third course of half brick masonry work complete in all respect as per direction of Engineer-in-Charge.
12990
-
-
... More
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil etc. complete as per direction of Engineer-in-Charge.
297.2
-
-
... More
Up to 600 mm dia
2
-
-
... More
Supply, installation, testing and commissioning of package type Ultra Filtration system of suitable capacity for STP of 120 KLD capacity complete with pre-treatment system comprising of UF hollow fibre membranes, high pressure pumps, chemical dosings, backwash pumps, piping, valves, y-strainers, treated water transfer pumps, pressure gauges, turbidity meter, ORP meter etc complete. The unit shall have all interlocking for safe operation of plant. The unit shall have skid mounted electrical panel complete with required starters and shall also have all Annuanciation and Controls. Indication instrumentation such as TDS meter at inlet/outlet, pH indicator, flow meter & totalizer shall also be provided. PLC with input/output modules shall be integrated with all auto equipments/ valves in auto mode. The piping shall be heavy duty SS 304 (Non-Magnetic). The pumps shall be of SS construction.
1
-
-
... More
Providing and fixing tamper switch on butterfly valve / sluice valve / isolation valve for remote mointing of the valve open / close position. The tamper switch shall be provided with potential free contact with 2 No. NONC. The valve shall also be provided with manual lock & chain arrangement.((MAKE: AXIN/ZOLOTO/NVR)
7
-
-
... More
50 mm dia nominal bore
245
-
-
... More
Supply, Testing & Commissioning, fixing of Analog addressable rate of rise Heat detector with mounting based LED, address switch to programme the detectors complete as required.
30
-
-
... More
300x16 mm
912
-
-
... More
3-Stage Breathing Air Filters
Air Receiver Tank
Terminal Units (Gas Outlets) with probes/Adaptors as per NFPA, CSA UL Listed as per NFPA 99, -
-
-
-
... More
Providing and fixing 5 mm thick glass door (with M.S frame) of size 2.1 m x 1.2 m with center opening for fire hose cabinet. Suitably marked on the outside with the letters "FIRE HOSE" including looking arrangement. All MS work to be in Red PO colour over appropriate primer. The above item is only for masonary fire station.
47
-
-
... More
100mm
258
-
-
... More
ETP Plant room sump pump 2 Nos (1 working + 1 standby) , Flow rate = 10 cum/hr, Head = 10-12 Mtr, (Solid handling size for this pump shall be 15 mm).
1
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Supply, installation, testing & commissioning of Tube Settler Quantity 01 number MOC MS with FRP lining 1.1 mm inside
Capacity 10.0 KL/Hour
1
-
-
... More
Providing & fixing cast steel non return valves of the following sizes G.M. suitable for pressure of 10 kg/sqcm complete with all necessary fittings
-
-
-
... More
7,000 CFM, 50 mm St. Pr., 4 Row CC, 2 Row HC
1
-
-
... More
5,000 CFM, 65 mm St. Pr., 4 Row CC, 2 Row HC
1
-
-
... More
Above 35 sq. mm and upto 95 sq. mm in ground
1825
-
-
... More
Nurse Station Terminal with antimicrobial coating having following features :
- Nurse Terminal shall comprises of required size TFT, Touch screen colour graphic display for displaying all details
- Handset with speaker and mic.
- Speech communication facility with other nurses in network at any time.
-changeover between hands-free and discrete speaking , required size connection cable with an RJ45 connection
- a smash proof glass panel (to protect the sensitive display from unnecessary contact during cleaning and
-touch screen function keys for operating the system, call forwarding, Querying receiver for speaking
- all indication and call query according to priority. This priority is customizable.
-Indication of events, which have been forwarded from foreign systems into the system, -Collective announcements, group interconnections,
- Facility to forward the call to desired node
- VDE 0834/ UL 1069 certified
-
-
-
... More
Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheelede, vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
Note *1. Although the rollers are required only
for 3 hours as per norms of output, but
the same have to be available at site for
six hours as the hot mix plant and paver
will take six hours for mixing and paving
the output of 450 tonnes considered in
this analysis. To cater for the idle period
of this rollers, their usage rates have been
multiplied by a factor of 0.65.
2.Quantity of Bitumen has been taken for
analysis purpose. The actual quantity will
depend upon job mix formula.
-
-
-
... More
4 core, 16 Sq.mm.
76
-
-
... More
POWER PANEL - 1 (GROUND FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
1 No. 200 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 200/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set
Bus Bars
250 Amps TPN, 25 kA for 1 sec. Copper bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
11 Nos. 40A FP Miniature Circuit Breaker, 10 kA breaking capacity.
3 Nos. 63A FP Miniature Circuit Breaker, 10 kA breaking capacity.
-
-
-
... More
UPS Panel-2 (Third Floor) described as above
1
-
-
... More
Compressed Air System The unit should have Quadruplex stationary air cooled silenced (Reciprocating) Oil-Free Air Compressor with critical maintenance free technology each having 57.18 scfm capacity.
1
-
-
... More
For Motor of 15.0 Kw
-
-
-
... More
Providing and fixing of 150 x 150 x 50 mm deep (Nominal size) wall junction box including providing 2 mm thick Hot deep - galvanized GI steel cover required as per specification.
55
-
-
... More
150mm dia
8
-
-
... More
40 mm dia nominal bore
357
-
-
... More
150 mm diameter
900
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
2.50sqmm flat cable
480
-
-
... More
5TH FL
83.57
-
-
... More
3RD FL
264
-
-
... More
65 mm dia
640
-
-
... More
20 KVA UPS 3 phase (415 V + 15%) Volts input & 3 phase output (415 V + 1%), 50 Hz, Input harmonic Current THD =3% typical at 100% load, ,=6% maximum at 50% load with Isolation Transformer and 90 min Battery backup for each UPS along with battery cabinet complete in all respect including supporting steel structure for UPS and Battery as required.UPS shall have facility for Stand alone operation. Quoted price shall be inclusive of required rating single core copper conductor cable including terminations,connections of UPS to panels, batteries etc complete in all respect and as per direction of Engineer in Charge.
1
-
-
... More
15,000 CFM, 1 x 9.3 Kw Fan Motor, 80 mm St. Pressure, Monoblock Pump
1
-
-
... More
Supplying, Installation Testing and commissioning of 33kV Polymer Disc insulator (70KN)
3
-
-
... More
Supply, installation, testing and commissioning of Variable Speed Pumping system consisting of two numbers 7.5 HP variable frequency drive (VFD) having IP-55 enclosure with heat sink suitably interfaced with other system components, hand / auto macro designed for pumping application, 01 no. dedicated microprocessor based pump logic controller with IP-55 enclosure, parallel pumping software duly downloaded, 02 No. Differential Pressure Sensor / Transmitters, interfacing amongst all components and compatibility of I/O signals etc complete with other accessories as required.
1
-
-
... More
1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone
aggregate 20 mm nominal size).
10
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
13168.5
-
-
... More
2 x 4C x 185 Sq. mm (Rate For Single Run)
180
-
-
... More
Supply, installation, testing & commissioning of Flash Mixer
Quantity 01 number
Drive 0.5 HP motor with gear Capacity 10 m3/Hour MOC: MS with FRP lining 1.1 mm inside
1
-
-
... More
100 mm dia
2
-
-
... More
Hot water generator shall meet ASHRAE 90.1-2004 Table 7.8 performance standard
Inlet Water Temperature 50 °C
Outlet Water Temperature 55 °C
Hot Water Pump Sets Supply, installation, testing and commissioning of Vertical Inline hot water centrifugal pump sets with bronze impeller for hot water recirculation complete with TEFC (EFF1) Sq. Cage induction motor with class "F" insulation, base plate, coupling guard, SS Shaft Grade 316, bronze impeller, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters. The hot water pumps shall also include the cost of thermal insulation. Hot water pumps shall be suitable for operation on variable frequency drives & conforming to the specifications of variable speed pumping system.
-
-
-
... More
300 mm wide x 50 mm x 1.6 mm
190
-
-
... More
For HW Pump (7.5 HP Each)
-
-
-
... More
80 mm dia
62
-
-
... More
Supply, Installation, Testing and Commissioning of 33kV/110V CVT (CT& PT for metering)combind set 6-3A/1A for HT metering
1
-
-
... More
1st Floor
844
-
-
... More
32 mm nominal bore
63
-
-
... More
Supply of Surface Mounted Led tube light (600mm) for Mirror Light fixture with inbuilt rod comprising of 10W LED tube with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 100 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job.
175
-
-
... More
50 mm dia. (32 mm thick insulation)
460
-
-
... More
150 mm dia
2
-
-
... More
All kinds of soil
-
-
-
... More
2nd Floor
590.62
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
407
-
-
... More
Electric resistance or induction butt welded tubes.
50
-
-
... More
3 core, 6 Sq.mm.
1100
-
-
... More
3rd
4030.96
-
-
... More
2nd Floor
2080.6
-
-
... More
SOIL, WASTE, VENT PIPES & FITTINGS.
Providing and fixing soil, waste and vent pipes.
Supplying all materials, labour, T&P and fitting and fixing Hubless Cast Iron waste ventilating pipes and fittings conforming to IS: 15905 or its latest revision to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge.
-
-
-
... More
6 way (4 + 18), Double door
36
-
-
... More
9,000 CFM, 25mm st. pr.
1
-
-
... More
uPVC : Submerged air dispersion grid
-
-
-
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
Capacity :1.5 LPS.
Head : 20 Mts
-
-
-
... More
Supplying of Rubber hand gloves suitable for 33 kV.
1
-
-
... More
Supply, installation, testing and commissioning of jockey pump (pressurisation pump) comprising of the following:
a. Vertical centrifugal pump, suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ A.C supply. The installation shall be complete with Flexible coupling and coupling guard, complete as required.
The pump casing shall be CI, shaft shall be SS & impeller / shaft sleeve / casing wearing ring shall be bronze. The pump shall be provided with mechanical seal The system shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side. (The pump should meet the condition and shall be gotten approved by the Local fire Authority).
b. Squirrel cage induction motor TEFC type for operation on 415 V, 3 phase 50 Hz AC supply for the above pump with a synchronous speed of 2900 RPM with flexible coupling and coupling guard etc. as required.
c. Common base plate for (a) and (b) from M.S. channel as required size.
d. Suitable cement concrete foundation with plaster, (design and drawing to be provided by the Contractor while the foundation will be done by others) complete with Antivibration arrangement of cushy foot mounting.
For pump defined above & of duty as follows :
Flow : 180 LPM
Head : 80 mts
2
-
-
... More
Duct Accoustic Lining
Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.
1040
-
-
... More
80 mm dia
4
-
-
... More
40 A TPN MCB with 9 / 12 / 16 A DOL starter, overload relay, start / stop push buttons, phase indication lights with protection fuse, on / off / trip indication lights with protection fuse, single phase preventer & auto / manual mode selector switch. Set - 01 Controls & interlocking accessories as required. Lot
-
-
-
... More
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).
3
-
-
... More
CONDUITING WIRING AND CABLING FOR NURSE CALL SYSTEM
Supply ,installation, testing and commissioning of the following.
Supply, Installation, Testing & Commissioning of the system IP based controller for a decentralised communications node for exchanging data between the connected system devices and the rest of the communications system, consisting of : - Metal case, - 1 x RJ45 socket, 100Mb IP Port (IEEE802.3 100BaseTX), galvanically isolated for connection of field devices in loop. At least 100 devices in a loop can be connected.
- RJ45 sockets, each for a 100Mb IP system port (IEEE802.3 100BaseTX) for connecting all IP capable system modules including nurse call station. At least 6 IP devices can be connected to this switch in star topology.
- Control LEDs for indicating the current operating state;
- All IP system modules are supplied with power using Power over LAN technology;
- Data and audio interface to a system TV device; - Output for connecting an external amplifier.
- VDE 0834/ UL 1069 certified
1
-
-
... More
Anesthesia Gas Scavanging System Oil Less Contactless Rotary Claw, Tank Mounted Duplex System should be fully compliant for use in Medical AGSS System. The unit should consist of four electric motor driven pumps vacuum receiver, electrical control system and interconnection piping and wiring. Design Capacity SCFM@ 19"Hg/Capacity of each pump is 39 / 39 with 5 HP Motor & Tank Size 120 gallons .
1
-
-
... More
Second class teak wood
311
-
-
... More
Providing & Fixing following fire rated fittings as per manufactures specifications and direction of the Engineer-In-Charge.
-
-
-
... More
3. Labour for traffic control, watch and
ward and other miscellaneous duties at
site including sundries have been
included in administrative overheads of
4. SDBC is to be laid over freshly laid
tack coat otherwise provision of
Mechanical broom and 2 mazdoors for
the same shall be included which has
been deleted as provided in the cost of
tack coat.
5. The quantity of Bitumen to be adjusted
as per job mix formula.
80
-
-
... More
GF
6281.96
-
-
... More
65 mm dia nominal bore
25
-
-
... More
Providing & fixing ultrasonic level transmitter with local display unit in plant room for underground oil storage tanks including wiring, cabling, probes with all other accessories for automatic operation complete as required. Level indications shall be compatible with BAS.
1
-
-
... More
Providing and fixing fully automatic hermatically sealed sliding door with lead insert/linning with view panel of size 400x400 on each leaf and with all acessaries complete in all respects as per drawing,manufactures specification and direction of Engineer-in-charge.
31
-
-
... More
3RD FL
1022.31
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:M
-
-
-
... More
1 core, 6 Sq.mm.
6
-
-
... More
KITCHEN PANEL
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
1 No. 250 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 250/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set
-
-
-
... More
Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
-
-
-
... More
With average thickness of 120 mm and minimum thickness at
khurra as 65 mm.
5967
-
-
... More
80 mm dia
8
-
-
... More
5TH FL
1618.64
-
-
... More
3RD FL
125.24
-
-
... More
80 mm Dia
4
-
-
... More
180 AH
1
-
-
... More
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
1073
-
-
... More
100 mm dia
328
-
-
... More
GSS Duct Damper
Supply, installation and testing of multiblade box type Galvanized Sheet Steel construction damper for ducts to be provided with suitable links and quadrants for control of volume of air.
30
-
-
... More
SS Door Handles
76
-
-
... More
Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
Ground Floor
1611
-
-
... More
Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Hindware Cat no.:11038 (STUDIO) OR Equivalent as per list of approved make)
-
-
-
... More
Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm
25
-
-
... More
32 mm dia
42
-
-
... More
125 mm dia
10
-
-
... More
50 mm dia
38
-
-
... More
Power & Control Cabling
Supply, laying, testing and commissioning of power and control cabling as per specification given in the tender. Power cabling of XLPE insulated Aluminium conductor armoured cables of 1.1 KV Grade including cable end termination with brass compression glands & aluminium lugs etc as per specification.
Power Cabling
For Chiller (170 Kw Each)
-
-
-
... More
Supply, installion, testing and commissioning of Packaged type Air to Water Heat Pump. These units shall be completely factory assembled including 2 Nos. Scroll Hermatically Sealed Scroll / Reciprocating Compressor(s), evaporator, Condenser and Microprocessor Control Panel etc with R134a / 410 a Referigerant and COP between 3-4. The Heat Pump shall have inbuilt hot water heat exchanger, vibratipon isolators, pumps, valves, expansion valve, Copper / Aluminium fins, and other accessories.The Heat Pump should be capable of producing hot water at minimum 55°C temperaure at outlet (condenser circuit) temperatures at 30°C ∆T. The Machine should have an operating ambient temperature range of 0°C to 50°C. Location: Terrace. (2 Working + 1 Standby)
Heating capacity : Approx. 120 kW
Input Power : Approx. 40 kW Hot Water Outlet Temperature : 55 deg C
Peak Water flow : Approx. 2900 LPH
a. Built in electric panel as per safety norms as manufacturer standard.
b. All other mountings, fittings & controls with all accessories and safeties c. All other mounting, fittings and controls.
d. Suitable for electric supply of 415 + 10% volts & 50 Hz.
e. All interconnecting wiring / cabling between heat pump and electrical panel.
-
-
-
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
-
-
-
... More
5 Gas Services (O2, Vac, N2O, Air 4, Air 7, )
-
-
-
... More
Capacity : 5 M3/hr @ Discharge Head 12 M head (1 Working + 1 Standby)
1
-
-
... More
Providing & fixing dual plate C.I. wafer type check valve tested to a pressure not less than 16 Kg/sqcm, including rubber gasket, flanges, union, nuts, bolts, washers & painting complete as required.MAKE; ZOLOTO /AXIN/SKS
-
-
-
... More
Providing and fixing 100mm dia G.I. vent pipe on Under ground and over head tank inlcuding cost of 2 Nos. 900 bend and painting with enamel paint complete with in all respect.(for underground tanks & overhead tanks).
-
-
-
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
2.5 TR, 8 mm external static
1
-
-
... More
7,000 CFM, 25mm st. pr.
3
-
-
... More
Sewage Treatment Plant Capacity :120 KLD (BASED ON MBBR + UF TECHNOLOGY)
Preliminary Works
All items of work under this Contract shall be executed strictly to fulfill the requirements laid down under “Basis of Design” in the specifications. Type of equipment, material specification, methods of installation and testing and type of control shall be in accordance with the specifications, approved shop drawings and the relevant Indian Standards, however capacity of each component and their quantities shall be such as to fulfill the below mentioned requirements.
The unit rate for all equipment or materials shall include cost in INDIAN RUPEES (INR) for all materials, fixing materials, accessories, appliances tools, plants, equipment, transport, labour and incidentals required in preparation for and in the full and entire execution as per Specifications and Drawings including all taxes and duties and also including forwarding, freight, insurance and transport into Contractor’s store at site, storage, installation, testing, balancing, commissioning and other works required or called for in item.In the event of conflict between Bill of Quantities and other documents including the Specifications, the most stringent shall apply. The interpretation of the Architect / Consultant /Project Manager shall be final and binding.
-
-
-
... More
Flow Rate : 2.0 LPS
1
-
-
... More
Capacity : 7.0 LPS
1
-
-
... More
Medium shade pigment using 50% white cement, 50% ordinary cement
1164
-
-
... More
2nd Floor
1210
-
-
... More
AHU PANEL - 2 (THIRD FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
1 No. 100 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 100/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set
Bus Bars
150 Amps TPN, 25 kA for 1 sec. Copper bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
1 Nos. 25A FP Miniature Circuit Breaker, 10 kA breaking capacity.
4 Nos. 40A FP Miniature Circuit Breaker, 10 kA breaking capacity.
3 Nos. 63A FP Miniature Circuit Breaker, 10 kA breaking capacity.
AHU Panel-2 (Third Floor) described as above
3
-
-
... More
32 mm
2738
-
-
... More
32mm nominal bore
739
-
-
... More
Bus Bars
300 Amps TPN, 35 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
63 A TP+N MCCB -3 No.
63 A 4 Pole MCB -3 No.
63A 4 Pole MCB with 63 A 4 Pole RCCB of 30mA - 4 No.
40A 4 Pole MCB with 40 A 4 Pole RCCB of 30mA - 4 No.
63A DP MCB with 63 A DP RCCB of 30mA - 4 No.
40A DP MCB with 40 A DP RCCB of 30mA - 4 No.
-
-
-
... More
22mm
28
-
-
... More
Lowering of 200mm dia GI/P.V.C/MS casing pipes 0 mtr to 30 mtrs=30.00
180
-
-
... More
80 mm dia. (32 mm thick insulation)
16
-
-
... More
150 mm dia
15
-
-
... More
Providing,fixing and laying of following dia hume Pipe NP2 class(light duty) in ground with RCC collars,jointing with cement mortor 1:2 (1cement+2fine sand) including trenching 75cm deep and re-filling as required.
-
-
-
... More
1ST FL
264
-
-
... More
MAIN INCOMING UPS PANEL (GROUND FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 35 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
2 No. 400 amps 4P, Ics= Icu 25 kA, Moulded Case Circuit Breaker with Thermal based release with ROH. with overcurrent, inbuilt Earth Fault and short circuit with ROH.
1 No Fixed type Automatic transfer switch 400 Amp rating in open frame with live to live transfer time 200ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS.
-
-
-
... More
150 mm dia
19
-
-
... More
1 core, 50 Sq.mm.
4
-
-
... More
2nd Floor
46.49
-
-
... More
SPRINKLER, PIPING & ACCESSORIES
-
-
-
... More
iv) R.C.C. foundation , plinth band and footings bases of columns mass concrete precast slabs etc
-
-
-
... More
40mm nominal bore
3
-
-
... More
Supply, installation, testing and commissioning of Bi-directional line extender amplifier housed in suitable size of MS box of CRCA sheet.
4
-
-
... More
Providing & fixing SS fire hydrant single landing valve with 80 NB flanged inlet, brass spindle controlled 63 mm dia female instantaneous outlet type. SS coupling, blank cap, chain, twist release type lug & all accessories. Conforming to IS standard. Including fixing with anchor fastner and flanged tapping from wet riser and providing pressure gauge with SS ball valve complete as required.((MAKE: OMEX/MINIMAX/NEWAGE)
61
-
-
... More
150 mm dia
6
-
-
... More
Providing, testing & commissioning of dial type pressure gauge with pressure scale of 0 to 15 kg / cm2. Provision of isolation cock suitable for maximum pressure of 15 kg/cm2 shall be included in cost.MAKE:EMERALD / EQUIVALENT
20
-
-
... More
Providing and fixing of dual plate CI wafer type check valve (suitable for test pressure of 15 kg / sqcm) with flanges, Nut, bolts & washers, painting etc. complete as required.((MAKE: AXIN/ZOLOTO/NVR)
-
-
-
... More
MECHANICAL EQUIPMENT: PUMPS, BLOWERS etc.
Supply, installation, testing & commissioning of non clogging type pumps having CI casing & CI impeller complete with all accessories, motor of required capacity. pressure gauge on delivery line with isolation cock, level controller (with wiring) to control the level of sump automatically. Pumps shall have following duty:
Submersible Sewage Pumps (Non-cutter type) for transfer of Raw Sewage in EQT(1 working & 1 standby) :-
Flow rate (each) = 2 LPS
Head = 8-10m
-
-
-
... More
2ND FL
583
-
-
... More
PVC : Flexible droppers
-
-
-
... More
3RD FL
83.57
-
-
... More
6th Floor
9
-
-
... More
AHU Panel- 1(Ground Floor) described as above
1
-
-
... More
3.5 core, 185 Sq.mm.
60
-
-
... More
Providing of insulating mat 1 meter wide & 6mm thick to withstand 3.3kV dielectric strength as per IS 5424- 1969
100
-
-
... More
65 mm dia
70
-
-
... More
Roof Joinrt of 100 mm Gap
17
-
-
... More
Power Panel - 4 (Third Floor) described as above
1
-
-
... More
125mm
1086
-
-
... More
Ground Floor
209
-
-
... More
TV antenna socket outlet
93
-
-
... More
6 Gas services(O2,Vac,N2O,Air 4,Air 7,AGSS)
6
-
-
... More
20 mm
4895
-
-
... More
GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
5686
-
-
... More
50 mm dia
60
-
-
... More
19core, 2.5 Sq.mm. Cu. Conductor cable
250
-
-
... More
Supply of Surface Mounted Led tube light fixture with inbuilt rod comprising of 38W LED tube with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 100 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job.
387
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
3 Slot
70
-
-
... More
3.5 core, 95 Sq.mm.
22
-
-
... More
42U as per EAI.
2
-
-
... More
Cooling Tower Capacity: 9,45,000 Kcal/Hr, 2W+1S
3
-
-
... More
Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department).
-
-
-
... More
Ground Floor
306.46
-
-
... More
50 mm dia
2
-
-
... More
Three pole and neutral
37
-
-
... More
Supply, installation, testing & commissioning of electrical driven rotary gear pumps suitable for pumping of HSD consisting of following :
Horizontally mounted single stage capable of delivering 110 LPM at 30 Mtr. Head while running at required 1440 RPM, complete with proper connection to suction and delivery line, bypass arrangement against over pressure.
Flame proof motor for fire protection pumping unit suitable for 400 + 10% V, 3 phase, 50 Hz AC supply and of suitable HP for the above pumps.
Flame proof ON/ OFF push button station suitable for above motor including connection and inter connection with starters’s installed in MCC.
Common base plate of required strength manufactured out of MS channels.
Suitable anti vibration damping arrangement with cushy foot or similar mounting arrangement.
Coupling and coupling guard for direct coupling of pump and motor.
Pressure gauge with valve on the delivery side.
Strainer at inlet.
-
-
-
... More
65 mm nominal outer dia Pipes (SCH-40)
657
-
-
... More
Red sand stone - 30mm thick gang saw cut stone
494
-
-
... More
4th
3024
-
-
... More
Supply, Testing & Commissioning, fixing of Addressable Glass Break type Manual Call Points as required as per specifications.
59
-
-
... More
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand)
20 mm thick with neat cement punning mixed with water proofing
compound in recommended proportion complete at all levels and as directed by Engineer-in-charge :
-
-
-
... More
Providing two coats of Synthetic enamel paint of approved shade on pipes and supports as per pipe colour code over a coat of primer. Including painting of legends with direction arrow as per the approval of Engineer-Incharge.MAKE:ASIAN/EQUIVALENT
-
-
-
... More
33 KV HT VCB SINGLE BREAKER PANEL-2 (INDOOR TYPE) (INCOMMING /OUTGOING)
Supply, Receiving, Unloading, Shifting, Installation Testing & Commissioning of 33 KV Single Breaker Vacuum Circuit Breaker Panel Board as Incomming / Outgoing shall be metal clad floor mounting complete as per specification and as described.
630 A Vacuum circuit breaker of (1000 MVA) 26.3 KA RMS for 3 second ruputuring capacity for at 33 KV rated, totally enclosed,air insulated metal clad housing, floor mounting, horizontal isolation, vermin proof, fully interlocked horizontal drawout type having isolation features and control devices complete with the following.
Manually and motor operated, spring charged (release closing mechanism) trip free type,triple pole truck mounted draw out, vacuum circuit breaker, incorporating mechanical as well as electrical ON/OFF indication. Spring charge/discharge mechanical indication"OFF" push buttons for emergency trip (shrouded) test/service position limit switches with 6 NO/6 NC breaker auxilliary contacts in service position, 24 Volts DC shunt trip coil and strip heater to prevent moisture absorption.
-
-
-
... More
Providing Single Line Diagram on 5mm thick Aluminium sheet in A0 Size duly laminated.
1
-
-
... More
BUTTERFLY VALVE (MANUAL) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. (AXIN/ZOLOTO/NVR)
-
-
-
... More
For 5,500 CFM to 7,500 CFM AHU
11
-
-
... More
Terminal Units (Gas Outlets) with probes/Adaptors as per NFPA, CSA UL Listed as per NFPA 99, -
300
-
-
... More
RoofJoinrt of 150 mm Gap
211
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
... More
32 mm nominal outer dia Pipes (SDR-11)
935
-
-
... More
Kiln burnt brick masonry in cement mortar (1:6) in super structure using K.B. bricks of 25cm x 12cm x 8cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Required for : Filter Feed pump
1
-
-
... More
9 Set of Auxilary Control contractors.
9 Set of Start/Trip push buttons. 9 Set of Indicating lamps (LED type) for capacitor ON (Green) & capacitor OFF (Red) 9 Set A/M Selector Switch.
3 Set of Axial flow fans with thermostate.
3 Set of Space heater.
All outgoing shall have Dual Source Energy meters with features like Class of accuracy: 1 as per IEC 62053-22/21, Avg Volt, Avg Amp,Total active power & energy delivered as measured by the meter .
Potential free contact shall be provided to remote starting facilities of each starter through BAS.
The control wiring shall be operate at 24V DC.
Wiring with space heater, thermostat and control MCB’s shall be provided all vertical sections of panel.
Suitable danger board shall be provided.
-
-
-
... More
25 mm dia nominal bore
69
-
-
... More
8,000 CFM (20mm st. pr, 600 mm Dia Axial Fan, 1.5 KW, 1450 RPM Fan Motor, Direct Driven)
2
-
-
... More
50 mm dia
2
-
-
... More
CONTROL CABLE END TERMINATION
Supplying and making end termination with double brass compression gland and Copper lugs for following size of PVC sheathed copper conducter armoured control cable of 1.1 kV grand as required.
-
-
-
... More
Supply, Installation, Testing & Commissioning of '48F splice holder etc. complete as per Tender specification.UL Listed.
11
-
-
... More
Supply of First aid box containing material as prescribed by St. John Ambulance brigade or Indian Red Cross complete as required
1
-
-
... More
Single pole and neutral
20
-
-
... More
Air Blower for Equalisation, sludge tank & aeration tank : Air blowers of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply. Numbers & capacity as per requirement with standby to be specified by vendor. Capacity: 120 m3/h x 4.5 m head, Qty (1W+1S)
1
-
-
... More
Supplying and laying Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
4847.08
-
-
... More
In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
Acid and alkali resistant tile.
174
-
-
... More
32 mm dia pipe, 13 mm Insulation
240
-
-
... More
DG Auto load sharing / Synchronising Panel -1 _ as described as above and as per specification complete in all respects.
1
-
-
... More
Supply, Testing & Commissioning, fixing of Addressable relay control modules etc complete as required as per specifications.
29
-
-
... More
32mm dia
19
-
-
... More
900 mm width X 62.5 mm depth X 2.0 mm thickness
28
-
-
... More
Capacity of Each Pump LPM 1814
Pump Head (Mt) 12.00 Motor HP (Indicative) 7.50
Pump Efficiency (Min) 75%
Secondary Chilled Water Pumps Set
Supply, installation, testing and commissioning of Vertical Inline chilled water centrifugal pump sets with bronze impeller for chilled water recirculation complete with TEFC (IE3) Sq. Cage induction motor with class "F" insulation, base plate, couplingguard, SS Shaft Grade 316, bronze impeller, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters. The chilled water pumps shall also include the cost of thermal insulation. Secondary chilled water pumps shall be suitable for operation on variable frequency drives & conforming to the specifications of variable speed pumping system.
-
-
-
... More
LIGHTING FIXTURES
-
-
-
... More
Column
508
-
-
... More
MAIN UPS OUTGOING PANEL
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
3 Nos. 200 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
Metering & Indication for each incomer
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 200/5 amps 10VA 1 set of ON/OFF indicating light shall be protected by 6A MCB.
Bus Coupler
1 Nos. 200 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
Bus Bars
600 Amps TPN, 25 kA for 1 sec. Copper bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
5 Nos. 160 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
1 Nos. 25A FP MCB, 10 KA breaking capacity.
6 Nos. 40A FP MCB, 10 KA breaking capacity.
1 No. 63A FP MCB, 10 KA breaking capacity.
-
-
-
... More
Using rough Kota stone
911
-
-
... More
Providing and fixing 150 X 100 mm unequal plain invert branch of required degree.
10
-
-
... More
1st
2556
-
-
... More
Smoke Extraction Panel-2 described as above
1
-
-
... More
32 mm dia. (19 mm thick insulation)
510
-
-
... More
Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per Clause 502 of MoSRT&H Specifications for Road & Bridge works (4th Revision).
-
-
-
... More
65 mm dia
10
-
-
... More
Fully Automatic Control Panel for N2O .
1
-
-
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
BATTERY CHARGER & BATTERIES
Supply, Installation, Testing and Commissioning of 24 V Battery Charger Capacity following capacity batteries Battery Charger shall be solid state, full wave fully controlled bridge, input suitable for single phase 230V AC suppply, conforming to degree of protection IP-42, Sheet steel enclosure 14 SWG thick, with automatic voltage regulation, current limiting circuitary, auto cut facility, smooth filter circuit switches, Ammeter & voltmeter on DC side, RYB indicating lamps (LED type) on AC side complete in all respect with float and boost/ buck charging, switchgear, earthing, powder coated painting etc as required.Suitable for 230 V, including DC DB single phase +/- 10% AC, 50 Hz supply as per specifications
-
-
-
... More
2ND FL
4631.55
-
-
... More
150mm dia RCC pipe
750
-
-
... More
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
4TH FL
4993.55
-
-
... More
5TH FL
368
-
-
... More
Supply, installation, testing and commissioning of 3 MP bullet camera , ONVIF profile S & G ,UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.8 mm to 12 mm motorized varifocal lens ,triple stream ,min illumination : 0.05 Lux @ (F1.2,AGC ON), 0 Lux with IR , Auto switch IR cut filter ,SD card support ,1 input / 1 output audio support ,Shutter Speed : 1/5 ̴ 1/100,000 s , DWDR , Video Compression : H.265 ,H.264 , frame rate : 30fps @ 3MP ,Edge analytics : line crossing , perimeter intrusion ,Face detection , cross counting , stationary object , In built IR LED , IR Distance upto 40 meters , IP 66 , POE. (Approved make - Axis / Impulse / Avigilon/ Mobotix/ Algovision)
5
-
-
... More
Hot Water Mixing Tank
Supply, installation, testing & commissioning of Corrosion Resistant Glass Lined Tank according to German DIN 4753 with magnesium anode rod for protection, heavy duty steel, factory fitted thermometer, with PU foam jacket of min 100mm thickness, suitable for external heater element mounting upto 100 kW, with access and maintetnace openings, suitable for 10 bar pressure and 95 deg C Temeperature. Tank shall be provided with hot water flow meter at inlet & outlet (approved by department of weights and measures), inlet / outlet, overflow / drain connection with MH cover (550 mm I.D.) pressure relief valves, pressure gauge at inlet / outlet with isolation cock, thermometer at inlet / outlet. All the valves & accessories shall be suitable for an operating pressure as mentioned above.
-
-
-
... More
150x10 mm
902
-
-
... More
MDB -T1,T2,T3 & T4- described as above
4
-
-
... More
Note 1, ( Anyone of the aggregate grading, screening and binding material may be used as per design) 2, In case of filler as moorum or gravel, blinding material is not required.
1518
-
-
... More
2nd Floor
1384.28
-
-
... More
Bed Head Panels(for ICU)
40
-
-
... More
3.5 core, 150 Sq.mm.
185
-
-
... More
Providing & Fixing of Installation Control Valve with turbine type automatic Alarm Gong to be connected with control valve, drain & test valve and all other necessary components as per manufacturer's specifications complete as required.(TYCO/VIKING/HD)
-
-
-
... More
For 150 mm dia pipe
25
-
-
... More
FIRE FIGHTING WORK
Supply, installation, testing and commissioning of electrically driven high pressure centrifugal fire hydrant /sprinkler pump, suitable for automatic operation consisting of the following:
a. Horizontal end suction centrifugal pump, suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ A.C supply. The installation shall be complete with flexible coupling and coupling guard as required. Fire pump shall have CI casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and SS (304) Shaft with mechanical seal, capable for delivering 2280 LPM at outlet head of 80 mts to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or topmost hydrant / sprinkler. The installation shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side. (The pump should be tested for bench mark at factory and shall be gotten approved by the Local fire Authority).
Pump shall be capable of furnishing not less than 150% of rated capacity at a head of not less than 65% of the rated head. The shut off head shall not exceed 120% of rated head.
-
-
-
... More
3000 CFM Supply Air, 8 Row CC, 2 Row HC, 125 mm St. Pr., Backward Curved Supply Fan, 850 CFM Ex. Air Blower, 40 mm St. Pr.for Exhaust fan with other accessories as specified)
4
-
-
... More
Light Panel - 2 (2nd to 4th Floor) described as above
1
-
-
... More
Secondary point cntrld by SP MCB
378
-
-
... More
Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it’s components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self – centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge . (Material shall confirm to ASTM 6063.)
-
-
-
... More
Supply installation testing and commissioning of Wet Chemical Based Kitchen Hood Suppression System comprising filled Cylinder and valve assembly with minimum 9 litre capacity including cyinder bracket, gasket, tube, nickle plated tube fittings such as tees, elbows, cross tees, union etc., stainless steel tube and fittings, nozzles, manual release device, pressure switch, wet chemical agent and other accessories as per specifications and required for the system as per Project Manager requirements. The whole system shall be LPCB approved including the wet chemical agent.(MAKE: OMEX/MINIMAX/NEWAGE)
2
-
-
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
80 mm dia. (32 mm thick insulation)
230
-
-
... More
40 mm dia
60
-
-
... More
Fixing of Udaipur green marble flooring of minium thickness 18mm thick of premium grade of size above 0.10 Sqm. in floors over 25mm thick bed of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) 78, solar reflection 0.70 and initial emittance 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner etc. complete as per direction of Engineer-in-Charge.
5237
-
-
... More
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
26
-
-
... More
Note *1. Although the rollers are required only
for 3 hours as per norms of output, but
the same have to be available at site for
six hours as the hot mix plant and paver
will take six hours for mixing and paving
the output of 450 tonnes considered in
this analysis. To cater for the idle period
of this rollers, their usage rates have been
multiplied by a factor of 0.65.
2.Quantity of Bitumen has been taken for
analysis purpose. The actual quantity will
depend upon job mix formula.
3. Labour for traffic control, watch and
ward and other miscellaneous duties at
site including sundries have been
included in administrative overheads of
4. BM is to be laid over freshly laid tack
coat otherwise provision of Mechanical
broom and 2 mazdoors for the same shall
be included which has been deleted as
provided in the cost of tack coat.
192
-
-
... More
MOC : CI
1
-
-
... More
The contractor shall include for making all the opening in slabs, beams, walls etc. as required for his work. However, the contractor can coordinate with civil work to provide necessary sleeves. All hot and cold water supply pipes crossing masonry walls of toilets shall be provided with GI pipe sleeves. The annular space between the pipe and sleeve shall be filled up with glass wool in between and fire proof sealent on either end after testing. All openings shall be closed using water proofing compound or as specified by Project Manager.
The work shall be carried out in conformity with the plumbing drawings and within the requirements of architectural, HVAC, electrical structural and other specialized services drawings. The contractor shall cooperate with all trades and agencies working on the site. He shall make provision for hangers, sleeves, structural openings and other requirements well in advance to prevent hold up of progress of the construction schedule. All supports to the civil structure shall be provided with anchor fastners.
On award of the work, contractor shall submit a schedule of construction in the form of a PERT chart or BAR chart for approval of the Project Manager.
-
-
-
... More
Providing & fixing GM fire brigade suction hose coupling (draw-out connection) with nut for female coupling as per IS: 902-1974 complete with 100 mm dia GI suction pipe and 100 mm dia foot valve (to be connected to static tank). Provision of GI drop pipe and foot valve shall be made in all the fire water static storage tanks (2 No) (GI pipe to be paid separately through appropriate item while cost of foot valve to be included).(MAKE: OMEX/MINIMAX/NEWAGE)
1
-
-
... More
Outgoing
2 Nos. 250 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA, with Thermal based release with ROH.
2 Nos. 200 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
2 Nos. 160 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
7 Nos. 100 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
1 Nos. 63 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
-
-
-
... More
65 mm dia
4
-
-
... More
Oil skimmer - belt type suitable for removing oil from other streams
1
-
-
... More
Using M.S. angels 40x40x6 mm for diagonal braces.
5.1
-
-
... More
65 mm dia. (32 mm thick insulation)
210
-
-
... More
Terrace
27.12
-
-
... More
Spray recessed (adjustable) rossette (68°C) sprinkler quick response pendant type.
1790
-
-
... More
Each Incomer shall have one set of the following items:
Energy meters with features like Class of accuracy: 1 as per IEC 62053-22/21, 12am Snapshot of Avg Volt, Avg Amp,Total active power & energy delivered as measured by the meter
6 Set of Indication Lamps, LED type, R,Y,B with 2 Amp control MCB and breaker 'ON', 'OFF', 'TRIP' & spring charged lamps.
Breaker failure protection.
CONTACTOR
A-100 amps 4 Pole contactor Ics= Icu 50 kA
B-200 amps 4 Pole contactor Ics= Icu 50 kA
C-400 amps 4 Pole contactor Ics= Icu 50 kA
-
-
-
... More
Factory Fabricated Double Skin Airwasher
Supply, installation, testing and commissioning of factory fabricated Double Skinned Air-washer unit floor mounted type fabricated out of extruded aluminium section with 0.6mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, blower suitable for static pressure as required (Fan Static given below is for guideline), blower section and blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, belt drive package, wet section & tank shall be made of 18 G stainless steel.
The Air-washer shall be complete with fill of depth 200 mm & face velocity across the fill shall be limited to 152 MPM. The Air-washer shall have an efficiency of 90% & shall be complete with water circulation pump GI B Class interconnecting piping & valves Aluminum viscous filters. The Air-washer shall have an efficiency of 90% & shall be complete with water circulation pump GI B Class interconnecting piping & valves Aluminum viscous filters. The airwasher panels shall be insulated with 23mm thick & 36 Kg/m³ density PU foam. The Airwasher shall conform to specication given in the tender & shall be of following capacity.
-
-
-
... More
b. Squirrel cage induction motor, TEFC type suitable for operation on 415 volts, 3 phase 50 HZ A.C supply, for the above pump with synchronous speed of 2900 RPM, conforming to IP 55 protection & class F insulation. The motor shall conform to IS 325-1978 (up to date) with flexible coupling and coupling guard, complete as required.
c. Common base plate for (a) and (b) from M.S. Channel for required size.
d. Suitable cement concrete foundation with cement concrete plaster (design and drawing to be provided by the Contractor while the foundation will be done by others) complete with anti-vibration arrangement of cushy foot mountings. (MAKE: KIRLOSKER PUMPS,MATHER+PLATT,LUBI PUMPS)
-
-
-
... More
LIFT PANEL - 1 (TYPICAL FOR LIFT PANEL - 2 & 3)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
2 Nos. 100 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
1 No Fixed type Automatic transfer switch 100 Amp rating in open frame with live to live transfer time 200ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS.
-
-
-
... More
Aluminium Cladding on Chilled / Hot Water Insulated Valves
Supplying & finishing of insulated CHW / HW pipes & valves with 24 G Aluminium sheet cladding with hand operated roller machine (Grooving Machine) & finally to be fixed with self tapping screws as per specifications & complete in all respect.
-
-
-
... More
3rd Floor
1340.39
-
-
... More
Supply, Installation, Testing and Commissioning of conventional Smoke Detector
8
-
-
... More
1100 - 1500 CFM (15mm static pressure, single phase)
14
-
-
... More
Extra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical means work complete in all respect as per direction of Engineer-in-Charge.
579.23
-
-
... More
250x16 mm
372
-
-
... More
9 mm
3390
-
-
... More
12 C x 2.5 Sq.mm.
26
-
-
... More
40 A TPN MCB with 16 A Star Delta starter, overload relay, start / stop push buttons, phase indication lights with protection fuse, on / off / trip indication lights with protection fuse, single phase preventer & auto / manual mode selector switch. SET-01 Controls & interlocking accessories as required. Lot
-
-
-
... More
2 x 3.5C x 240 Sq. mm (Rate For Single Run)
180
-
-
... More
The access to the UV lamp shall be without the need to interrupt the ballast circuit. The unit shall be provided with elapsed running time meter, non resettable to 99,999 hours. Cost shall be inclusive of electrical wiring with plug.
-
-
-
... More
Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places.
Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories
Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”
Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 33109 testing method for a range up to 2000 ml.”
Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml”
Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME330-10 testing method for a range upto 50 mm”
-
-
-
... More
Pipe up to 50 mm dia
20
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
... More
2 x 3C x 6 Sq. mm
310
-
-
... More
Bus Coupler
1 No. 630 amps 4P, Ics= Icu 25 kA, Moulded Case Circuit Breaker with microprocessor based release with overcurrent and short circuit with ROH.
Metering & Indication 1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 set of ON/OFF indicating light shall be protected by 6A MCB.
Bus Bars
800 Amps TPN, 25 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
-
-
-
... More
Providing and fixing of dual plate CI wafer type check valve (suitable for operating pressure of 16 kg / sqcm) with flanges, Nut, bolts & washers, painting etc. complete as required.(AXIN/ZOLOTO/NVR)
-
-
-
... More
10 LPH Capacity
6
-
-
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account) etc. complete as per direction of Engineer-in-Charge.
8286
-
-
... More
Supply, Installation, Testing & Commissioning of 24 10/100/1000BASE-T, 4 SFP combo, 4 1GbE unpopulated SFP upgradable to 10GbE SFP+, 1 Fixed AC PSU, 1 RPS port, with license.
3
-
-
... More
4th Floor
398.46
-
-
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
953.39
-
-
... More
Spray recessed (adjustable) rossette (68°C) sprinkler quick response upright type.
1790
-
-
... More
The pump set as described above with outdoor protection duty
2
-
-
... More
5th Floor
9
-
-
... More
Group- B (For Residence & Hostel)
575
-
-
... More
Main AC Panel
1
-
-
... More
Supply, installation, testing and commissioning of Variable Speed Pumping system for Zone I consisting of three numbers 12.5 HP or as per final selection of secondary pump motor HP variable frequency drive (VFD) having IP-54/55 enclosure with heat sink suitably interfaced with other system components, hand / auto macro designed for pumping application, 01 no. dedicated microprocessor based pump logic controller, parallel pumping software duly downloaded, 02 No. Differential Pressure Sensor / Transmitters, interfacing amongst all components and compatibility of I/O signals etc complete with other accessories as required.
1
-
-
... More
2nd
2472
-
-
... More
TRANSFORMERS
33/ 0.433 KV INDOOR TYPE TRANSFORMER (Oil Filled TYPE WITH ON LOAD TAP CHANGE OVER)
Supply, Installation, Testing and Commissioning of 630 KVA 3 phase, 33 / 0.433 KV Out door type oil filled type transformer copper wound with DNY II connection and neutral brought out for earthing. The transformer shall be provided with (+) 5% and (-) 15% in step of 1.25% ON load tap changer on HT side confirming to IS : 1180 - 2014 and ECBC-2017. HT side cable termination box shall be suitable for 33 KV, 3 C x 240mm2 XLPE cable and LT side cable terminal box shall be suitable for terminating of 1000 A cables. The transformer shall be supplied with all accessories complete as per specifications on all respect.
3
-
-
... More
Providing & fixing GM collection assembly fitted with lockable brass cap suitable for local oil tanker
1
-
-
... More
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
340
-
-
... More
Fixing 18 mm Granite Stone of approved dimension area above 0.4 sqm (20mm thick) in floor, treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
Providing and fixing all piping (as described below) and isolation control valves, non return valves etc. for making the system complete.
PVC piping (10kg/sqcm) - For all submerged waste water piping.
MS (C Class) - For all exposed air piping and flexible stainless steel pipe for submerged air piping.
-
-
-
... More
Cable Tray
Fabricating and installing following size of perforated M.S. Cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders and including painting with powder coating etc as required.
-
-
-
... More
50 mm nominal outer dia Pipes (SDR-11)
1050
-
-
... More
Powder coated minimum thickness 50 micron aluminium
2992
-
-
... More
Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.
100
-
-
... More
25 mm dia
47
-
-
... More
Supply, installation, testing and commissioning of 56" totally flat colour LCD monitor as per Specification with connectivity complete as required.
6
-
-
... More
Supplying and fixing call bell/ buzzer including connections etc. as required.
156
-
-
... More
3RD FL
123.51
-
-
... More
40mm dia (13 mm thickness)
236
-
-
... More
Supply, installation, testing and commissioning of 32 channel NVR with two video outputs as per Specification. Contractor shall size the NVR for real time 400 FPS / 4 CIF resolution 30 days of continous recording and submit data sheet of their storage calculation for both MPEG 4 and H.264 recording formats. The NVR with IP connectivity, DVD R/W & USB connectivity complete as required.
4
-
-
... More
5C x 1.5 Sq. mm
540
-
-
... More
Constructing brick masonry water tight grease trap (with three chambers , each of 0.4 M X 0.6 M in plan) with 75 class designation bricks in cement mortar 1 : 5 ( 1 cement : 5 fine sand ) earth work, excavation in all kinds of soil, foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside and outside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including constructing baffle wall, stainless steel angles on corners, stainless steel perforated plates with stainless steel lifting handles in each chamber, inlet and outlet fittings in UPVC, double seal C.I. covers complete as per standard design:
-
-
-
... More
GF Roof Beam
273
-
-
... More
Sidewell extended coverage (68°C) sprinkler quick response type.
5
-
-
... More
33KV H.T. PANEL (INDOOR TYPE) :
33KV H.T. METERING PANEL-1 (INDOOR TYPE):
Supply, Receiving, Unloading, Storing, Shifting, Installation, Testing & Commissioning of indoor type floor mounted, dust, damp and vermin proof, cubicle HT. Metering Panel made out of 14 gauge CRCA sheet steel complete with 5Amp electronic trivector meter, C.T.'s of 60/5Amp, 0.5 Class, 10VA Burden, and P.T's of 33KV/ /3, 110V/ /3, 100 VA conforming to relevant IS Standards and complete as required. H.T. Metering cubicle along with C.T.'s, P.T.'s and trivector meter shall be got tested and approved from local electricity supply authority. The GA drawing shall be got approved by Local Electricity Board authorities before fabrication.
1
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
59
-
-
... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
4
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
1477
-
-
... More
Thermometer
Providing & fixing in position the mercury in glass industrial type thermometers.
6
-
-
... More
Providing 12 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Softner Feed Pumps - (1W+1S), having discharge : 2.0 LPS (each) at 25 meter head
1
-
-
... More
Installation, testing and commissioning of pre-wired, LED Tube Light fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
872
-
-
... More
1st
4395.96
-
-
... More
Medical Equipment Panel described as above
1
-
-
... More
900 mm width x 75mm depth x 2 mm thickness.
1
-
-
... More
Installation, testing and commissioning of Recessed Down Light/Surface Down Light /wall Mounted LED fittings of all sizes upto 25W LED, complete with all accessories including connections etc. as required.
3278
-
-
... More
65 mm dia nominal bore
265
-
-
... More
40 amps
13
-
-
... More
b. Heat exchanger cooled (secondary cooling) diesel engine of speed 1500 RPM suitable for the above pump with automatic starting mechanism and other accessories including fuel tank (fabricated from 3mm MS sheet, painted with two coats of synthetic enamel paint over a coat of primer) of capacity adequate to sustain pump operation for 8 hours continuous working. The tank shall be fitted with Magnetic oil level indicator, MH with cover, drain valve, air vent including structural supports (painted with approved shade), 1 No. x 12 volt battery, heat exchanger with necessary piping connections & fittings, flexible coupling, coupling guard & exhaust pipe connection complete as required.
c. Common base plate for (a) and (b) from M.S. channel of required size.
d. Suitable cement concrete foundation with plaster, (design and drawing to be provided by the Contractor while the foundation will be done by others) complete with antivibration arrangement of cushy foot mountings.
e. The rate includes interconnecting cables, foundations & foundation bolts
1
-
-
... More
SDB-1 _described as above
1
-
-
... More
600 mm width X 62.5 mm depth X 2.0 mm thickness
143
-
-
... More
Mechanical Foam type Fire Extinguisher. In HP Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged complete in all respects including wall suspension bracket / trolley mounted and confoming to IS:910.(MAKE: OMEX/MINIMAX/NEWAGE)
-
-
-
... More
20mm (9 mm thickness)
1041
-
-
... More
Supply, Installation, Testing & Commissioning of 48 port L2 Managed switch having port density 48 Nos of 10M/100M/1G RJ45 Port POE ports , 4 Nos of 1G/10G SFP+ Port , 1X console port , Available POE power 370 W , 128 Gbps switching bandwidth , 32K MAC address support , Support L2 feature STP, RSTP ,MSTP . Support 802.1Q VLAN , port based VLAN , 4K VLAN entries , MAC based VLAN , IP subnet based VLAN . Support IEEE 802.3ad LACP . L3 features - static routing , DHCP server , Device Management system - topology view , floor view , map view , dashboard , traffic monitoring , cable diagnostics.CE,FCC certified. (Approved make - Cisco / Impulse / Juniper)
11
-
-
... More
250 mm dia
2
-
-
... More
100 mm dia
2
-
-
... More
25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws.
103
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet etc. complete as per direction of Engineer-in-Charge.
25
-
-
... More
3 Gas Services ( O2, Vac, Air 4)
15
-
-
... More
Two coats.
42023.98
-
-
... More
R.C.C work of M-25 Grade in following item of works having a minimum compressive strength (in work test) 200kg/sqcm in 15cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS516 using 12mm to 20mm size black hard crusher broken granite stone chips as per the design mix of approved quality and from approved quarry including hoisting, lowering, laying and compaction by using vibrators, watering, curing for 28days, centering, shuttering and finishing the exposed surface smooth, providing grooves or beads where necessary including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS Rod or tor steel and binding wires & labour charges for bending binding and tying the grills & shuttering work etc. as per specification and direction of the E.I.C.
-
-
-
... More
Light Panel-1 (GR. & 1st Floor) described as above
1
-
-
... More
Supply, installation, testing and commissioning of followings with commnication cable and accessories as required for system.
Voice Controller as required for system interface with FAS,EPBAX and LIFT system.
suitable Zone selector with micro phone including keypad as required for system.
Router as required for system.
-
-
-
... More
UPS PANEL - 1 (FIRST FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
2 Nos. 160 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
1 No Fixed type Automatic transfer switch 160 Amp rating in open frame with live to live transfer time 200ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs for each incomer. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 160/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set for each incomer
200 Amps TPN, 25 kA for 1 sec. Copper bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
7 Nos. 25A FP Miniature Circuit Breaker, 10 kA breaking capacity.
5 Nos. 40A FP Miniature Circuit Breaker, 10 kA breaking capacity.
5 Nos. 63A DP Miniature Circuit Breaker, 10 kA breaking capacity.
-
-
-
... More
Pressure Gauges
Supply, installation, testing and commissioning of pressure guage of approved make of dia 150 mm conforming to tender specifications.
130
-
-
... More
Diluting and injecting chemical emulsion for POST- ONSTRUCTIONAL antitermite treatment (excluding the cost of chemical emulsion) etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
Meter Board -1,2,3 & 4 for (Nurse Hostel ) (Non -Teachning Staff )
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 35 kA symmetrical at 415 volts.
Incoming
1 No.100 amps 4P, Ics= Icu 25 kA, Moulded Case Circuit Breaker with microprocessor based release unit with ROH having following protection;
• Overload (adjustable thermal)
• Short-circuit (fixed magnetic )
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 set of Phase indicating light shall be protected by 6A MCB.
Bus Bars
150 Amps TPN, 35 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
23 No. 25 amps DP Miniature Current Circuit Breaker Ics= Icu 10 kA following protection with Single Phase Teriff energy meter;
• Overload (Fixed thermal)
• Short-circuit (fixed magnetic )
-
-
-
... More
20mm dia rigid UPVC pipes
160
-
-
... More
Extra for depth for manholes :
-
-
-
... More
65 mm dia
2
-
-
... More
Pumps
Providing, installation, testing & commissioning of following insulated pumps suitable for 415 Volts connected with TEFC induction motor, DOL starter, MS channel, base plate complete with vibration isolators, isolating valve on suction and discharge, non return valve on discharge, Y strainer on suction, pressure gauges with stop cock and dial type thermometer on suction or discharge. The pump shall have mechanical seal. The pump shall be SS casing, impeller, shaft & CI (epoxy coated) base (suitable for hot water temperature)
Domestic Hot Water Return Pumps
Pump - 2 No. (1W + 1 SB)
Flow - 1.0 LPS
-
-
-
... More
Foundation to Plinth
95
-
-
... More
AHU Panel-3 (Fourth Floor) described as above
3
-
-
... More
NOTE:- LPS MEANS LITRE PER SECOND
Submersible Pump
Submersiable Centrifugal Non-clog Drainage Pump
Supply, installation, testing and commissioning of continuous duty submersible centrifugal non-clogging drainage pumps complete with 3 phase motor with all necessary protection and mechanical seal etc. complete with all ancillaries including float type level controllers, electrical control panels fabricatd from 14 gauge CRCA sheet volt meter ammeter with selector switch, TPMCB, 5 VA CL : CTs, phase indicating lamps protected by 2 amp SP MCB, DOL starter, necessary wiring, cable alleys, earthing, interlocking, starter with Automatic float type level controller, providion of high level alarm, sequence timer, potential free contact to starter for connection to BAS, both pumps may run simultaneously at pre determind level. (1Working + 1Standby).MAKE:GRUNDFOSS /EQUIVALENT
Vendor to submit proposed pump model with duty curve.
Flow rate : 10 LPS each
Head : 15 Mts Solid Handling : 10 – 12 MM
Location : WTP Plant Room
Purpose : Drainage
-
-
-
... More
Supply, Installation, Testing and Commissioning of earth truck for 33kV VCB panel
1
-
-
... More
15 m length
108
-
-
... More
2 H.P. Single phase/ three phase 3 stage head renge of 30 to 54 mtr with discharge capasity 155 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
4
-
-
... More
Marble
475
-
-
... More
Providing and fixing of C.P. brass 15mm pillar tap :Make :JAQUAR:CON-021KN OR Equivalent as per list of approved make)
224
-
-
... More
Supplying, installing, testing & commissioning of ultravoilet dis-infection unit. The unit shall have over 99.9 % bacterial reduction from inlet to outlet. The dis-infection chamber shall be constructed of SS 316L on all welted parts. The UV lamp shall be of low pressure mercury vapour type with hard glass enclosure, the sockets shall be water tight & vibration resistant. The lamp life shall be rated for 6000 hours. The unit shall be complete with temperature safety control, lamp out alert circuit & UV radiometer with 4 – 20 mA output.
The UV unit shall have with reactor, cabinet housing, cabinet cooling, treatment chamber, electrical panel, temperature safety control, lampout alert, UV radiometer along with UV monitoring system and UV monitoring readout panel. The UV Dosage should be 60,000 uW – Sec / sq.cm. The lamps should be selected based upon the flow requirement of respective unit.
-
-
-
... More
4th Floor
1690
-
-
... More
6TH Floor
33.72
-
-
... More
Supply, installation, testing and commissioning of package type RO plant complete with pre-treatment system comprising of feed water pumps, filters, dosing systems, RO membrances, RO high pressure pumps, post treatment system comprising of dosing system; pH correction system etc complete. The unit shall have all interlocking for safe operation of plant. The unit shall have skid mounted electrical panel complete with required starters and shally also have all Annuanciation and Controls. Indication instrumentation such as TDS meter at inlet/outlet, pH indicator, flow meter & totalizer shall also be provided. The piping shall be heavy duty PVC, SS 304 (Non-Magnetic). The filter shall be FRP and pumps shall be of SS construction. The basis of design shall be for feed water inlet TDS of 1200 PPM. Contractor is suggested to cary out the feed water chemical analysis and ensure suitability of RO plant operation.
-
-
-
... More
For Vent Fan Motor of 5.6 Kw
2
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
Digital Display Type Thermostat Cum Humidistat For AHU
For All OT AHU (T + RH Control)
Supply, installation, testing and commissioning of digital display, communicating type thermostat with humidistat for various air handling Units. The thermostat with built in / individual humidistat shall have provision of setting of space temperature & RH and shall display the both. The quoted price of thermostat / humidistat shall include the cost of 20mm MS conduits, control cabling, MS Box etc as required. Temperature + RH Sensor for AHUs are also specified in BMS Part. Thermostat with built in humidistat shall be installed in case BMS commissioning is significantly delayed.
6
-
-
... More
Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.
57
-
-
... More
250 mm dia
30
-
-
... More
Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified. (AXIN/ZOLOTO/NVR)
-
-
-
... More
Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer –in- charge, including compacting each layer by rolling/ ramming and watering , all complete as per drawing and direction of Engineer -in - charge.
2740
-
-
... More
Contractor must submit for approval shop drawings, that detail pipe routing and levels, showing location of other services at crossings etc., cable runs, route cable trays and all allied works and must be fully coordinated with other services, before execution of the works. All shop drawings will be made on Autocad and coloured prints has to be produced for site work.
The contractor shall, from time to time, clear away all debris and excess materials accumulated at the site failing which the same shall be done by Project Manager at contractor’s risk and cost and cost of clean up shall be deducted from the contractors prorata bill. After the fixtures, equipment and appliances have been installed and commissioned, contractor shall cleanup the same and remove all plaster, paints, stains, stickers and other foreign matter or discoloration leaving the same in a ready to use condition. Contractor shall demolish all stores, remove all surplus materials and leave the site in a broom clean condition
-
-
-
... More
Providing and fixing union bonnet type globe valves having bronze body and SS working parts (screwed ends) with insulation. (for DWS)
-
-
-
... More
4TH FL Roof Beam
342.81
-
-
... More
POWER PANEL - 4 (THIRD FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
1 No. 200 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs.
1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 200/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set
Bus Bars
250 Amps TPN, 25 kA for 1 sec. Copper bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
4 Nos. 40A FP Miniature Circuit Breaker, 10 kA breaking capacity.
7 Nos. 63A FP Miniature Circuit Breaker, 10 kA breaking capacity.
-
-
-
... More
Ground Floor
982.25
-
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
5TH FL
146.44
-
-
... More
1ST FL
218.24
-
-
... More
For Motor Up to 3.73 Kw
-
-
-
... More
Supply, installation, testing and commissioning of (BOSCH /ATIES) of rack mounted dual Channel Digital Power Amplifier capable of delivering 300 W RMS power output or 480 W RMS burst output; complete with 100 V Line Matching Transformer, built-in fan for temperature control, Distortion typically 0.03% @ 1 KHz, Hum and Noise 90 dB below rated output selection facility,provision for hookup with Fire Alarm Panel, complete with connections and required circuitry
7
-
-
... More
Supplying and stacking sludge at site including royalty and carriage up to 5 km (sludge measured in stacks will be reduced by 8% for payment).
268
-
-
... More
Each Incomer shall have one set of the following items:
Intelligent multi function digital meter with Capability of Disturbance Direction Detection, Sag & Swell Monitoring with Waveform Capturing, Class of accuracy: 0.2S as per IEC62053-22, Sampling Rate of 256 Samples/Cycle, Harmonics analysis upto 63rd order for Voltage & Current, RS485 PORT & Dual Ethernet PORT
1 Set of Indication Lamps, LED type, R,Y,B with 2 Amp control MCB and breaker 'ON', 'OFF', 'TRIP' & spring charged lamps.
Breaker failure protection.
BUS BARS
1250 Amps TPN, 25 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
-
-
-
... More
Sanitary sealing upto 5mtrs below ground level.
4
-
-
... More
Double Skin Floor Mounted AHU (CC + HC + MERV 8 & 13) Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier,
Blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4 / 6 Row cooling coil and 2 row heating coil made of Aluminium finned Copper tube with coil section, Copper Header, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, fine filter section with MERV 13 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers, coilotron UV section only of 600 mm in length in floor mounted AHU (Coilotron UV System quantified separately). The AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The AHU shall be with one set of commissioning filter which shall be replaced with actual filter.
-
-
-
... More
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
Providing, fixing, jointing and testing in position solar Primary & Secondary System piping, as per required dia. of GI C Class pipes conforming to BIS Standards incl. fittings such as tees, crosses, plugs, elbows, reducers, unions, sleeve pieces etc. Cost shall be inclusive of Fixing/supporting the pipes (& fittings) at wall/floor level supported by MS clamps, supports etc, as per specification. All system piping to be insulated. 1 No. Motor control panel needs to be provided for the entire system for Forced Circulation, Heat Transfer & Control (Primary & Secondary Circulation Pumps)
-
-
-
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. MAKE:JAQUAR OR Equivalent as per list of approved make)
51
-
-
... More
50 mm dia
2
-
-
... More
FIRE ALARM SYSTEM
Supply, installation, testing and commissioning of 8 Loop Microprocessor based intelligent analogue addressable, modular, expandable networkable, following loop (each loop consist of minimum 125detector & 125devices) fire alarm control panel with minimum 640 character LCD display, multiple access levels, event history file in non-volatile memory (EEPROM).The panel shall support programmable relay for controlling lifts, staircase pressurizations fans, lift shaft & lift lobby pressurization fans, toilets exhaust fans, ventilation fans, monitoring of fire sprinkler and fire hydrant pump controlled by powerful Boolean logic equation. The panel shall have minimum five independent hazard release circuit built-in the panel.the panel shall have in built facility for voice evacuation system and two way comunication and also interface with Public Adressing system . The panel shall have 240 volts AC power supply, automatic battery charger, 24 volts, sealed lead acid maintenance free batteries sufficient for 24 hours normal working and then be capable of operating the system for 4 hours during emergency condition. The panel shall be UL/EN listed. Tenderer to provide interfacing connectivity (BAC Net/modbus gateway) in Fire Panel for integrating with building management system complete as per specification
2
-
-
... More
Supply, Testing & Commissioning, fixing of Fault Isolators for isolating shorted, dewired and loose circuits between two successive fault isolators with automatic resetting arrangement complete as required.
90
-
-
... More
80 mm dia
8
-
-
... More
Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design.
-
-
-
... More
80 mm dia
4
-
-
... More
SOLAR-GRID CONNECTED SYSTEM
Supplying installation,testing and commissioning of each kW power with Solar Photovoltaic system including PV Modules aluminium super structure supported on GI support, string PCUs, Copper maintainace free copper earthing, connection of earthing pit to SPV system including insulated copper strip / cables , associated power and control cabling from SPV panel to power panel and Main distribution panel in each cluster as per specification complete in all respect as per site requirement including cabling upto solar panel . (Inclusive of earthing for DC as well as AC equipment or system)
15
-
-
... More
Laying of Above 185 sq. mm and upto 400 sq. mm XLPE power cable of 1.1 kV grade direct in ground
4620
-
-
... More
50 Pair
495
-
-
... More
42mm
13
-
-
... More
9U as per EAI.
11
-
-
... More
100 mm width x 50mm depth x 1.6 mm thickness.
15
-
-
... More
1st Floor
2080.6
-
-
... More
NOTE:
Contractor shall include all electrical and mechanical items as required to operate the system automatically and also include in his rates any other components/tanks/ equipment/ etc. required to complete the job as required. Only main power supply with the earthing to be ETP main control panel shall be provided by the owner through other agencies. The electrical panel will also include all the required NO/NC contacts, contactors etc. required to provide BMS connectivity. Bypass arrangement shall be provided such that equalization tank pump can be used to pump out sewage to external manhole incase of maintenance of ETP.
All piping interconnection with Sewage Treatment plant shall be considered in the scope of work.
All water meters shall be considered for Effluent treatment plant.
-
-
-
... More
5th
753.96
-
-
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
503
-
-
... More
1 x 3C x 6 Sq. mm
230
-
-
... More
3.5core, 240 Sq.mm.
14
-
-
... More
150 mm dia. (32 mm thick insulation)
120
-
-
... More
4 Gas Services (O2, Vac, N2O, Air 4, )
2
-
-
... More
3 core, 6 Sq.mm, Copper Ar. Cable
610
-
-
... More
3rd Floor
367.58
-
-
... More
5TH FL
623
-
-
... More
Providing & fixing dial type (100 mm) pressure gauge with isolation ball valve suitable for working pressure of 250 PSI. Cost shall be inclusive of providing any short pieces, nipples, elbows etc as required.
25
-
-
... More
POWER PANEL - 5 (FOURTH FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
1 No. 200 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 200/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set
Bus Bars
250 Amps TPN, 25 kA for 1 sec. Copper bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
6 Nos. 40A FP Miniature Circuit Breaker, 10 kA breaking capacity.
8 Nos. 63A FP Miniature Circuit Breaker, 10 kA breaking capacity.
-
-
-
... More
4 core, 6 Sq.mm.
6
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
30870.25
-
-
... More
200 mm dia (For Condenser Out, Cooling Tower In)
6
-
-
... More
Emergency Panel-3 (3rd & 4th Floor) described as above
1
-
-
... More
Supply, Installation, Testing and Commissioning of MS Channel 100x50x6mm
200
-
-
... More
Providing and fixing of CP Brass Bath and Shower Mixer with provision of overhead shower with 115mm long bend pipe, in built spout, spout / shower selector with wall flange complete with all accessories as required and making good the walls wherever required. with flow rate of 6.0 LPM complying to Green Building requirements. . (Make : JAQUAR:CON-273KNUPR OR Equivalent as per list of approved make)
120
-
-
... More
5TH FL
4898.55
-
-
... More
Supply of Surface Mounted Led tube light fixture with inbuilt rod comprising of 20W LED tube with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 100 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job.
872
-
-
... More
50 mm dia
1
-
-
... More
100 mm dia (For Hot Water Generator)
2
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid
227
-
-
... More
100 mm dia
18
-
-
... More
9,000 CFM, 1 x 3.7 Kw Fan Motor, 50 mm St. Pressure, Monoblock Pump
1
-
-
... More
5th
1755
-
-
... More
1ST FL
3183.94
-
-
... More
25 mm dia
25
-
-
... More
a) 10 mm dia auto air vent valve
35
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
150
-
-
... More
v) R.C.C. beams, column, grider and bressmer, etc. Data for 4.2sqm
-
-
-
... More
Supply of Recessed Mounted Led Down Lighter comprising of 15W LED with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 100 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job.
486
-
-
... More
GF
280.04
-
-
... More
50 mm dia. (32 mm thick insulation)
73
-
-
... More
25 mm dia. (19 mm thick insulation)
39
-
-
... More
Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Providing & fixing oil flow meter with 50 mm dia flanged end for HSD service
1
-
-
... More
3 Core 185 Sq.mm (Outdoor)
1
-
-
... More
WATER SUPPLY, DRAINAGE, PUMPS & EQUIPMENT
Supplying, installing, testing and commissioning of SS vertical centrifugal pump. Each pump shall have TEFC 2900 RPM three phase electric motor (EFF-III). The pump shall have cast iron head, base plate SS Shaft / Impeller / Intermediate chamber along with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, strainer (with by-pass) at suction. Pump shall be provided with mechanical seal, suitable vibration elimination pads of approved design, drain pipe with valve (25 dia), flexible mettalic pump collector of stainless steel corrugated tubing with Stainless steel overbraid and carbion steel flanges. The pump shall be suitable for auto/ manual operation. The installation shall be complete with all necessary ancillaries & accessories including base plate complete as required. MAKE:GRUNDFOSS/EQUIVALENT
Flow rate : 5.2 LPS each
Head : 45 Mts
No. of pumps : 2 (1 Working + 1 Standby)
-
-
-
... More
Roof slab (Includinf all Element floor wise)
-
-
-
... More
1ST FL
292.4
-
-
... More
Providing and fixing ball bearing for rolling shutters etc. complete as per direction of Engineer-in-Charge.
18
-
-
... More
50 mm dia
9
-
-
... More
1 core,120 Sq.mm
10
-
-
... More
18 G (Above 2250 mm)
180
-
-
... More
10 Kg
8
-
-
... More
EMERGENCY PANEL - 1 (GROUND FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
1 No. 63 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 60/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set
Bus Bars
100 Amps TPN, 25 kA for 1 sec. Copper bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
5 Nos. 25A DP MCB, 10 KA breaking capacity.
1 Nos. 40A DP MCB, 10 KA breaking capacity.
3 Nos. 63A FP MCB, 10 KA breaking capacity.
-
-
-
... More
Supply, Testing & Commissioning, fixing of Addressable monitor modules for Sprinkler Flow Switch, Fire doors, magnetic contacts complete as required as per specifications.
21
-
-
... More
Hot Water Pump Sets (2W+1S)
2
-
-
... More
Incomer
40 A TPN MCB with (0-40A) ammeter with three CT and selector switch, (0 - 500 V) voltmeter with selector switch, phase indication light with protection fuse. SET-01 Outgoing
a) For Fan Motor of 2 x 2.2 Kw 32 A TPN MCB with 12 A DOL starter, overload relay, start/stop push buttons, ammeter (0-32A) with single CT, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch. SET-02 Controls & interlocking accessories as required. Lot
Single Phase MCB for FCU / Inline Fan Supply, Installation, testing & Commissioning of single phase MCB of following capacity:
-
-
-
... More
Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m :
-
-
-
... More
Outgoing
3 Nos. 400 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
3 Nos. 250 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
3 Nos. 200 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
2 Nos. 160 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
2 Nos. 125 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
8 Nos. 100 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
-
-
-
... More
40 mm
40
-
-
... More
19 mm dia
40
-
-
... More
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used etc. complete as per direction of Engineer-in-Charge.
373
-
-
... More
Rectangular or square.
1397
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
Valves & Strainer
Supply, installation, testing and commissioning of following valves in chilled / hot water line as per specification given in the tender. Valves shall be insulated as per pipe insulation material & thickness given above. Globe / Ball Valves
-
-
-
... More
4th Floor
746.62
-
-
... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
Supplying and fixing of Shock treatment chart both in Regional, Hindi & English.and framed with 5mm thick glass as required.
5
-
-
... More
Terrace Floor
175.18
-
-
... More
150 mm dia
-
-
-
... More
GF
4959.21
-
-
... More
Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge.
50
-
-
... More
Site Fabricated GI Ducting
Supply, installation, balancing and commissioning of site fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) etc. complete as per direction of Engineer-in-Charge.
For fixed portion
-
-
-
... More
Supplying and stacking at site dump manure from approved source, including carriage up to 5 km Complete (manure measured in stacks will be reduced by 8% for payment) :
-
-
-
... More
2ND FL
2221
-
-
... More
6TH FL
100.14
-
-
... More
Cooling capacity 40 Lts./hr Storage capacity 80 Lts.
11
-
-
... More
25 mm nominal bore
148
-
-
... More
Providing and fixing S.S. tower bolts ISI marked with necessary screws etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
FOR MANUAL SYNCHRONIZING OPERATION (For Each DG set)
1 No - Double voltmeter analog type 0 - 500V 1 No - Double frequency meter analog type 45-55Hz
1 No - SynchroNocope analog type 1 No - Synchroning switch
1 No - Auto / Manual switch rotary 1 No - DG selectors switch (1 to 5) position
1 No - Check Synchronizing Relay
1 No. - Bright Lamp
1 No. - Dark Lamp
-
-
-
... More
6th Floor
113
-
-
... More
Supply of Wall mounted 9W LED Bulk head light fixture, LED of 1 to 3 W each assembled on single MCPCB, having color temp 6500K & having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy80lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Housing made of CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory. i/c connection wire, testing etc. to complete the job.
91
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
30
-
-
... More
4 Kg capacity NOVEC 1230, DLP Assembly with automatic valve, push in connector for tube, NOVEC 1230 gas, mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.
15
-
-
... More
BUTTERFLY VALVE (MANUAL) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified.
-
-
-
... More
Group C (For Hospital)
2345
-
-
... More
1.00 mm thick with zinc coating not less than 275 gm/m²
84
-
-
... More
Supply and stacking of Ficus bengalensis (Bargad) plant of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
70
-
-
... More
Group- B (For Residence & Hostel)
200
-
-
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the walls etc., (Internal work) :
-
-
-
... More
Capacity : 03 m3/h
Head : 15 m
1
-
-
... More
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
ARI Certified Rotary Screw Water Cooled Chilling Machine With Air Cooled VFD & Microprocessor Based Control Panel (Capacity - 200 TR)
Supply, installation, testing and commissioning of Rotary Screw Water cooled water Chilling M/C of 200 TR actual capacity at below mentioned operating conditions with R - 134 A refrigerant, open / semihermatic / hermatically sealed compressor, driven by suitable KW Sq. Cage induction motor complete with variable speed drive complete with watercooled shell & tube condenser, insulated shell and tube flooded chiller, flow switches at condenser & chiller outlet, refrigerant piping, Refrigerant and Oil (First Charge), Microprocessor based control panel, chiller / floor mounted aircooled VSD with IP 54 enclosure, active harmonic filters & accessories etc. all mounted on M.S. frame. Motor shall be suitable for 415 volts ± 10%, 50Hz ± 5 %, three phase A.C. supply. The chilling m/c as described above shall be in line with specifications & shall have interface card compatible with BMS system. Actual capacity of chillers shall be based the parameters given below & power consumption / TR at 100%, 75%, 50% & 25% load shall be based on ARI Condition. Condenser CDW IN - 32.22º C. CDW OUT - 36.38º C. FLOW - 3024 LPM Fouling Factor (MKS) - 0.0002 Pressure Drop Max - 6.5 Meter Chiller CHW IN - 12.22º C. CHW OUT - 6.67º C. FLOW - 1814 LPM Fouling Factor (MKS) - 0.0001 Pressure Drop Max - 6.5 Meter COP At AHRI Condition - 5.8 (Min)
Power Consumption Of Chiller / TR At Tender Condition Mentioned Above (Max) - 0.70
-
-
-
... More
3 core, 10 Sq.mm.
201.43
-
-
... More
50 mm dia
19
-
-
... More
4 core, 25 Sq.mm.
25
-
-
... More
Staircase/Shelves/Slab (Includinf all Element floor wise)
-
-
-
... More
Shrubs Plant
200
-
-
... More
3RD FL
588
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).
9151
-
-
... More
100 mm
40
-
-
... More
42mm OD X 1.2mm thk
600
-
-
... More
Providing and fixing of storage type water cooler of the following capacity, ISI marked, stainless steel front panel, CP brass push cock, inlet float valve complete as required. MAKE: USHA/ORANGEBLUE STAR.
-
-
-
... More
Auto Air Vent
Supply, installation, testing and commissioning of auto air vent valve of following sizes and complying with tender specification.
-
-
-
... More
Wall Joint of 100 mm gap
43
-
-
... More
150 mm dia
4
-
-
... More
OT UPS Incoming Panel-1 & 2 described as above
2
-
-
... More
2 Pair
450.83
-
-
... More
40 mm Dia
10
-
-
... More
Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.
57
-
-
... More
Supply, installation, testing and commissioning of Surface Ceiling / Wall Mounted Speakers of 6 W RMS power with multitaps, handling capacity, inbuilt 100 V Line Matching Transformer, Wide Opening angle, Optimized for music and speech applications, complete with mounting clamps.
2
-
-
... More
2nd Floor
807.5
-
-
... More
100 mm dia. (32 mm thick insulation)
26
-
-
... More
For Vent Fan Motor Up to 3.73 Kw
10
-
-
... More
single stoper
550
-
-
... More
Permeate Flow rate : 500 LPH
1
-
-
... More
Supply, Installation, Testing & Commissioning of 48 10/100/1000BASE-T, 4 SFP combo, 4 1GbE unpopulated SFP upgradable to 10GbE SFP+ (2 combo/2 non-combo), 2 1GbE copper combo upgradable to 10GbE, 1 Fixed AC PSU, 1 RPS port, with license.
11
-
-
... More
40mm nominal bore
456
-
-
... More
750 mm width x 75mm depth x 2 mm thickness.
1
-
-
... More
40 A TPN MCB with 25 A DOL starter, overload relay, start / stop push buttons, phase indication lights with protection fuse, on / off / trip indication lights with protection fuse, single phase preventer & auto / manual mode selector switch. SET-01 Controls & interlocking accessories as required. Lot
-
-
-
... More
Providing and fixing of CP brass wall mounted sink mixer with C.P. wall flange, swinging spout complete as required with flow rate of 6.0 LPM complying to Green Building requirements.Make : JAQUAR:CON-309KN OR Equivalent as per list of approved make)
91
-
-
... More
2 core, 10 Sq.mm. / 2 core, 6 Sq.mm.
66
-
-
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
31072.8
-
-
... More
10-30 Pair
7
-
-
... More
For 6 Patient Bed Rooms with 2 Washrooms and 1 corridoor
16
-
-
... More
200 mm dia (NB) (6 mm thick)
30
-
-
... More
Site Fabricated Aluminium Ducting Supply, fabrication, installation & testing of Aluminium sheet metal ducting duly polysulphide sealed complete with Spliter Damper, vanes etc. as required for OT and as per ISI specifications and as per approved shop drawings.
-
-
-
... More
Providing and laying Ceramic Rectified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) etc. complete as per direction of Engineer-in-Charge.
10753.8
-
-
... More
GF
2859
-
-
... More
Providing and fixing plain multipurpose cement board(Hight pressure
steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately) etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
Glass ( Wired) Vision Panel Of Size 200mm X 300mm
200
-
-
... More
32 mm Dia
27
-
-
... More
Providing & fixing swinging type Compact Type First Aid hose reel in red colour drum with Bursting pressure of Type II pipe of 42 bar with 36 mts. long and 20 mm dia heavy duty thermoplastic water hose, 20 mm dia globe valve stop cock, terminating with SS coupling & nozzle of 6mm outlet with shut off valve confirming to IS 8090 - 1976 complete with MS socket for tap-off, drum and brackets (including painting) for fixing on wall with anchor fastner, bolts & nuts complete as required.(MAKE: OMEX/MINIMAX/NEWAGE)
47
-
-
... More
200mm dia SW /RCC pipepipe
150
-
-
... More
50 mm nominal bore
9
-
-
... More
50 mm dia
4
-
-
... More
supply, deliver and installation of AURA ASIPL open cell ceiling 100mm open cell ceiling with cell size of 100x100mm made out GI steel. The assembled cell ceiling panels shall be in size of 600x1200 made out of blades in 9mm (W) x 40mm (H). The assembled cell ceiling panels are then clipped into U-‐94 carriers in GI, pre-‐coated in black enamelled finished at 1200mm c.c. Wire clips shall hold the cell ceiling panels into the U-‐94 carriers. Once the U-‐94 carriers are installed then primary angles made out of GMS, type U1040 are cross connected to the U-‐94 carriers at 1200mm c.c. for lateral bracing The whole ceiling shall be suspended by M6 threaded rods installed 1200mm c.c. All panel modules must be hingeable through wire clips.
462
-
-
... More
Nitrous Oxide System
4 + 4 size manifold extendable type complete with middle frame with chain for individual cylinder (bulk cylinder D-type) along with Non-Return Valves for every cylinder and copper tail pipes .
1
-
-
... More
Supplying and installing following size of Hot Dipped Galvanised Iron Raceways with cover (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
3.5 core, 70 Sq.mm.
14
-
-
... More
6 mm thick cement board
2508
-
-
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
4th Floor
1425
-
-
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete as per direction of Engineer-in-Charge.
980
-
-
... More
1 core, 16 Sq.mm.
1048
-
-
... More
For Motor of 5.5 Kw
-
-
-
... More
For Inline Fan / FCU
-
-
-
... More
Outgoings
a) For 2 Nos. Water-cooled Chilling Machine (2W+0S) with VFD
400 A 4 Pole MCCB with overload, short circuit & earth fault protection with (0 - 400A) ammeter with three CT & selector switch, on / off indication light with protection fuses. SET - 02 b) For 1 No Change Over Switch for Water-cooled Chilling Machine (0W+1S) with VFD
2 x 400 A 4 Pole MCCB with overload, short circuit & earth fault protection & 1 x 400 A Manually Operated Change Over Switch with (0 - 400A) ammeter with three CT & selector switch, on / off indication light with protection fuses. SET - 01 c) For 3 Nos. 7.5 HP Pr. CHW Pumps for Chiller (2W+1S)
40 A TPN MCB with 25 A DOL starter, overload relay, start/stop push buttons, ammeter (0-40A) with three CT & selector switch, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch. SET - 03 d) For 3 Nos. 30 HP CDW Pumps for Chiller (2W+1S)
100 A 4 Pole MCCB with 45 A star delta starter, overload relay, start / stop push buttons, ammeter (0-100A) with three CT & selector switch, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch. SET-03 e) For 2 Nos. 7.5 HP HW Variable Speed Pumps 32 A TPN MCB. SET-02 f) For 3 Nos. 12.5 HP Sr. CHW Variable Speed Pumps
40 A TPN MCB. SET-03 g) For 3 Nos. 12.5 HP CT Fan Variable Speed Motor (2W+1S) 40 A TPN MCB. SET-03 Controls & interlocking accessories as required. Lot
Electrical Sub Panel for FAN / AWS / MVU
Note: AHU Power Control Panel & Switchgears in AHU BOQ
Supply, installation, testing and commissioning of Cubical wall mounted type switch board as detailed below & switch gears suitable for AC - 23 duty including making interconnection etc as required. BMS compitable electronic KWH meter shall have been taken in main electrical work therefore same shall not be part of followings sub panel.
-
-
-
... More
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per Clause 404 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
-
-
-
... More
Effluent from OT Scrubs, blood bank, labs etc. Some solvent/ chemical waste originating typically from hospital complex shall also be discharged into the ETP. Design to take consideration of same.
Daily average flow : 20 Cum/Day
PH : 5.5 - 9.0
BOD : 250 - 600 mg/l
S. Solids : 200 - 650 Mg/l
COD : 600 - 1200 mg/l
Oil & Grease : 50-140 mg/L
Effluent discharge standard after treatment :-
PH : 7.0 - 8.5
S. Solids : Less than 150 mg/l
COD : Less than 100 mg/l
Oil & Grease : Less than 5 mg/l
BOD : Less than 30 Mg/L
The ETP shall consist of following units but not limited to these unit as may be required by the manufacturer's design. MS PVC coated rungs in all tanks & Platform for maintenance etc. complete as required.
-
-
-
... More
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Make : Jayna :Galaxy-SBF 02 OR Equivalent as per list of approved make)
-
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.Make : JAQUAR:CON-059KN OR Equivalent as per list of approved make)
-
-
-
... More
50 mm dia
70
-
-
... More
65 mm Dia
6
-
-
... More
Note:Contractor shall include in his rates for providing level controllers, pressure switches, wiring, cabling from level controller / pressure switch to panel etc. complete as required to operate the system automatic/manual. Pump shall be protected against running dry.
-
-
-
... More
15 KVA UPS 3 phase (415 V + 15%) Volts input & 1 phase output (230 V + 1%), 50 Hz, Input harmonic Current THD =3% typical at 100% load, ,=6% maximum at 50% load with Isolation Transformer and 30 min Battery backup for each UPS along with battery cabinet complete in all respect including supporting steel structure for UPS and Battery as required.UPS shall have facility for parallel operation. Quoted price shall be inclusive of required rating single core copper conductor cable including terminations,connections of UPS to panels, batteries etc complete in all respect and as per direction of Engineer in Charge.
8
-
-
... More
Supplying and fixing brass batten/ angle holder including connections etc. as required.
280
-
-
... More
Providing & Laying G.R.C. brick tiles Of approved make for wall lining with special adhesive like Araldite or equivalent over 10mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement with an admixture of pigment to match the stone shade etc. complete as per direction of Engineer-in-Charge.
1010
-
-
... More
25mm dia
46
-
-
... More
vii) R.C.C. walls and fins including attached pillasters
-
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
259
-
-
... More
Supply of plastic manhole step / foot rest (@ 300 mm c/c) with polypropelene compound injection molded around 16 mm dia (Fe-415) steel reinforcing bar. Provision of the foot rest is envisaged in various tanks/ components of the STP for the purpose of accessability.
1
-
-
... More
65 mm nominal bore
7
-
-
... More
125 mm dia. (32 mm thick insulation)
90
-
-
... More
For 14,000 to 16,000 CFM AHU
2
-
-
... More
200 mm dia
18
-
-
... More
Note Bitumen primer has been provided @ 0.60 kg per sqm as per clause 502.8. Payment shall be made with adjustment, plus or minus, for the variation between this quantity and the actual quantity approved by the Engineer after the preliminary trials referred to Clause No.502,4,3
3203
-
-
... More
450 mm wide x 50 mm x 2 mm
50
-
-
... More
3rd Floor
812.5
-
-
... More
50 mm nominal outer dia Pipes
178
-
-
... More
450 mm width x 50mm depth x 2 mm thickness.
15
-
-
... More
For 10 Patient Bed Rooms with 4 Washrooms and 1 corridoor
1
-
-
... More
Pressure Gauges
Supply, installation, testing and commissioning of pressure guage of approved make of dia 150 mm conforming to tender specifications.
12
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
2.0 TR, 5 mm external static
2
-
-
... More
4TH FL
638
-
-
... More
200 mm dia
2
-
-
... More
5th Floor
142.39
-
-
... More
Providing and fixing heavy duty SS Floor grating with frame of approved design including setting in floor with cement motor to match with floor finish as per architect requirement. (for FHC drain pipe)
-
-
-
... More
Activated Carbon Filter Working pressure 3.5 Kg/Sq.cm
-
-
-
... More
Supply, installation, testing and commissioning of 900 litres capacity day oil storage tank fabricated from 4 mm thick MS plates. Tank shall include 450 mm ID manhole cover, level indicator and flanged connection for inlet, outlet, overflow drain and probe provision for level controller. Tank shall be mounted on 2 m high structure support with access ladder (painted with 2 coats of red oxide primer).
1
-
-
... More
Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
537
-
-
... More
Providing and fixing 150 mm single equal plain invert branch of required degree.
5
-
-
... More
IPBX
Supply, Installation and Commissioning of EPABX System complete with following specifications as required.
Digital, Non-Blocking, ISDN / ATM, IP ready, hot standby on control cards, Communication Server with SIP.
Equipped with:
Control section cPCI architecture
Based on Real Time 2gIP platform
Trunk side : 2 ISDN PRI Interface (30 channels)
32 P&T Trunk lines Extension side: 300 analogue extensions
24 digital extensions 24 IP extensions With CALLER ID ON DIGITAL AND ANALOG PUSH BUTTON TELEPHONES / EXTENSION**Internal & External Both System Features: -
IP Distributed Architecture
Parallel Ringing on Extensions as well as on GSM Handset.
Support for Integrated IP Gateways
VOIP Capability
System Documentation on CD-ROM
Support for OFC Connectivity
Expandable up to 10,000 ports.
For Caller ID, Analog Push Button Phone Should have the capability of CLI Only on PRI Lines/Trunk lines
IP Based Operator ConsoleWith BLF and Wired U.S.B. Head set - 03 Nos
Modem for Remote Maintenance - 01 No.
Maintenance Terminal software - 01 No.
Music In Hold - 01 No.
Paging Interface / Fire Alarm Interface - 01 No.
Voice mail (08 Ports) - 01 No.
Call billing software - 01 No.
Power back up for 04 hrs
-
-
-
... More
100 mm dia
2
-
-
... More
15 mm nominal bore
311
-
-
... More
Providing and laying bituminous macadam with hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per Clause 504 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
-
-
-
... More
Providing and fixing of white vitreous china Janitor sink with C.I. brackets, C.P. brass chain with rubber plug, 32 mm C.P brass waste and 32mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : (Make : Hindware Cat no. : 50001OR Equivalent as per list of approved make)
10
-
-
... More
100 mm dia (For Hot Water Generator)
2
-
-
... More
Providing & fixing dial type (100 mm) pressure gauge with isolation ball valve suitable for working pressure of 250 PSI. Cost shall be inclusive of providing any short pieces, nipples, elbows etc as required.
54
-
-
... More
Four way Tap Off (T4)
11
-
-
... More
Capacity - suitable for 120 KLD STP
ELECTRICAL INSTALLATION FOR SEWAGE TREATMENT PLANT SYSTEM
Fabrication, wiring, supply of motor control centre shall be fabricated out of 14 gauge CRCA sheet steel in form in 3b formation with reinforcement of suitable size angle iron, channel ‘T’ sections irons and/or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Cadmium Plated hardware shall be used in fabrication of panels. Quoted rates shall inclusive of cables, cable trays, control cabling, earthing (in accordance to specification) with earthing from panel to each motor / equipment.
-
-
-
... More
Supply, installing, testing & commissioning of Electrical system including Electrical Panel for all the above including all switchgear, cables, control wiring, multi function multimeters etc., also including the complete automation of the plant with level controllers and sensors in the HDPE and the MS tanks,control cabling, complete in all respects as required as per IS specifications.
1
-
-
... More
Supply, Testing & Commissioning, fixing of Network Repeater Panel with 6 inch or 640 characters LCD Panel ; The LCD shall Display all events / detectors, devices status of complete systems in the networked, The NRP shall be equipped with QWERTY Keypad. Mounting options include an annunciator box, and blank modules are required for mounting.
2
-
-
... More
R.C.C work of M-30 Grade in following item of works having a minimum compressive strength (in work test) 200kg/sqcm in 15cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS516 using 12mm to 20mm size black hard crusher broken granite stone chips as per the design mix of approved quality and from approved quarry including hoisting, lowering, laying and compaction by using vibrators, watering, curing for 28days, centering, shuttering and finishing the exposed surface smooth, providing grooves or beads where necessary including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS Rod or tor steel and binding wires & labour charges for bending binding and tying the grills & shuttering work etc. as per specification and direction of the E.I.C.
-
-
-
... More
GF
4630
-
-
... More
Capacity: suitable for 120 KLD
1
-
-
... More
Supply and Installation of 4.5 meter high Decorative MS pole (3.6 meter above and 0.9 meter below ground with ladder bars including chatsworth kit, junction box complete as per requirement with all accessories.
6
-
-
... More
Emergency Panel - 2 (1st & 2nd Floor) described as above
1
-
-
... More
Cost of 200mm dia P.V.C schedule-80 pipe
184
-
-
... More
Supplying and fixing following way, horizontal type threSupplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)
-
-
-
... More
d) 18 G (Above 2250 mm)
90
-
-
... More
Providing, fitting, fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials all labour,labour cess complete in all respects.
-
-
-
... More
150 mm dia
6
-
-
... More
Providing and fixing of 350 x 350 x 50 mm deep (Nominal size) wall junction box including providing 2 mm thick Hot deep - galvanized GI steel cover required as per specification.
22
-
-
... More
Terrace Floor
34.57
-
-
... More
Providing and fixing of Health faucet with regulator with flexible pipe 1.0 m long, wall hooked complete as required with flow rate of 3.8 LPM complying to Green Building requirements Make:JAQUAR:ALD-CHR-585 OR Equivalent as per list of approved make)
181
-
-
... More
Drilling of 150mm dia bore 46mtr to 120mtr
300
-
-
... More
Supply, installation, testing and commissioning of electrically operated water flow switches (Vane type) including tamper switch and accessories, complete with tap off socket arrangement as required, with potential free contact with 2 No. NONC.
-
-
-
... More
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
2655
-
-
... More
Providing and fixing cast iron gratings for Rain Water Pipes.
-
-
-
... More
Secondary Voltage : 230 V AC + 1%
Cooling : Air Cooled
Winding & Type : Copper winding double wound with shield grounded to isolated ground bus secondary ungrounded
Spike suppression level : Not more than 3 dB
Insulation Class : H
Overloading Capacity : 50% for one hour
Sound level
complete Unit with cabinet : Not more than 28 dB.
Line Isolation Monitor : Hazard Index 5 mA
Conist of leakage current detector control transformer mother board with relay etc. LIM monitor card.(Pieco Make)
Indication & Metering
Meter with selection indicator including selector switch : 0-10 mA.
-
-
-
... More
Area of slab over 0.50 Sqm
730.85
-
-
... More
terrace
730
-
-
... More
Supply, Installation, Testing & Commissioning of 8 10/100/1000BASE-T, 4 SFP combo, 4 1GbE unpopulated SFP upgradable to 10GbE SFP+ (2 combo/2 non-combo), 2 1GbE copper combo upgradable to 10GbE, 1 Fixed AC PSU, 1 RPS port, with license.
14
-
-
... More
with ISI marked M.S. pressed butt hinges bright finished of required size
-
-
-
... More
Providing and laying light weight Foam Concrete of density 500 kg/cum in sunken portion at all levels as per direction of Engineer-In-Charge.
365
-
-
... More
5th Floor
-
-
-
... More
Flushing water transfer Pump (To OHT of Residence)
Location - STP (1W+1SB)= 1set
Capacity - 1.0 LPS.
-
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the direction of the Engineer-in-charge.
57249.82
-
-
... More
f. The Heat pump shall have an in-built facility to start / stop depending on variation in demand at different periods.
4
-
-
... More
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
The cabinet shall be suitable to accommodate 2 No.or 4 No 15mtr long Hose pipe & 2 No branch pipe nozzle. It shall be mounted on raised Brick platform complete as required.
-
-
-
... More
20 G
90
-
-
... More
Medical Gas Terminal/Outlet points for AGSS. (CE MARKED)UL LISTED
6
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
635
-
-
... More
Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 10 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc.
-
-
-
... More
22 G
590
-
-
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Back Filling of surplus excavated earth at work site by initial lead of 50.00mtr and initial lift of 1.50mtr including cost of all labour T&P required for the work etc. complete as directed by Engineer-In-Charge
-
-
-
... More
1ST FL
934.31
-
-
... More
UV System
Air Blowers, Pumps & equipment
Piping, valves etc
Clear Water Tank
Irrigation / Flushing Water tank Soft Water tank
Electrical Panel & Cabling
All piping, valves & level indicator/controller etc. within plant room.
All tanks of STP will be of RCC & will be in civil contractor's scope. STP vendor will provide the capacity of these tanks to civil contractor. Puddle flanges shall be provided for all the structural component of the STP. The installation of the puddle flanges shall be carried out by the Civil contractor in accordance to the Civil GA drawing (to be prepared by the STP contractor) at the required levels & position; under the supervision of the STP contractor. Also, provision of the foot rest is envisaged in various tanks/ components of the STP for the purpose of accessability. The installation of the foot rest shall be done by the civil contractor as per civil GA drawing.
-
-
-
... More
150 mm width X 40 mm depth X 1.6 mm thickness Raceways
72
-
-
... More
Providing & complete testing kit with all chemicals complete suitable for conducting test on water quality. The test kit shall be suitable to measure TDS, pH, Hardness, Iron content and other parameters.
2
-
-
... More
4 core, 10 Sq.mm.
3736
-
-
... More
4,000 CFM (20mm st. pr, 500 mm Dia Axial Fan, 1.1 KW, 1450 RPM Fan Motor, Direct Driven)
2
-
-
... More
Providing and Fixing SS 63 mm dia instantaneous pattern branch short pipe, 20 mm dia nozzle conforming to IS standard, suitable for inter connection to hose pipe coupling complete as required..(MAKE: OMEX/MINIMAX/NEWAGE)
61
-
-
... More
Supply,Testing & Commissioning of 6inch depth Vertical Cable manager PVC double sided for 42U with PVC finger and accessories, UL listed complete as per Tender specification.
2
-
-
... More
5TH FL
125.24
-
-
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). C
537
-
-
... More
(Cost shall be inclusive of providing break glass box containing key for the cabinet along with hammer).
14
-
-
... More
250 mm dia. (6 mm thick) (32 mm thick insulation)
75
-
-
... More
Acoustic Insulation of AC Plant Room Supplying, fixing acoustic lining on wall and ceiling of AC Plant Room with 50 mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610 mm x 610 mm frame work made of 25X50X50X50X25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications.
450
-
-
... More
Supply and stacking of Azadirachta indica ( Neem ) plant of height 120- 130cm in big polybag of size 25 cm as per direction of the officer-in-charge.
70
-
-
... More
20 Pair
350
-
-
... More
6 + 6 Cylinders Emergency Oxygen Manifold with two stage High flow rate regulator with NRV for every cylinder and copper tail pipes as per specifications.
1
-
-
... More
PUBLIC ADDRESS SYSTEM
Supply, installation, testing and commissioning of False Ceiling Speakers of 6 W RMS power with multitaps, handling capacity, inbuilt 100 V Line Matching Transformer, Wide Opening angle, Optimized for music and speech applications, complete with mounting clamps.
489.5
-
-
... More
1ST FL Roof Beam
331.81
-
-
... More
Supply, Fabrication, installation, testing and commisioning of effluent treatment plant with effluent handling capacity 20 m3 per day. The entire plant will be constructed in MS (FRP coated, min. 3 mm). The ETP shall be designed as water retaining structures, with necessary chemical dosing as required by the manufacturer's design. All the equipment, piping, pumps, air blowers and electrical panel to be housed in the ETP skid including M.S. puddle flange (Galvanised), inlet, outlet, overflow, vent, moving ladders & railing. The Plant shall be complete with a central Electrical Power and Control panel fully pre/site wired and with all power and control cables to all pumps and equipment including all instrumentation, level and other controls. The cost will also include any consequential civil work including making foundations for the structure, pumps, blowers etc. It should be complete as per manufacturer's specifications & as directed by Engineer-in-charge.
-
-
-
... More
1 x 3C x 4 Sq. mm
450
-
-
... More
Providing 20 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
100 mm dia
30
-
-
... More
100 - 200 CFM (3 mm Ex. St. Pr.)
32
-
-
... More
For Fan Motor, 2 x 2.2 / 3.7 Kw For Panel Room, Pump Room, STP Ventilation
3
-
-
... More
1st Floor
46.49
-
-
... More
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slabs etc. complete as per direction of Engineer-in-Charge.
405
-
-
... More
Terrace
108.48
-
-
... More
Condenser Water Piping
Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends, tees etc..but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect.
Note:-The Pipes size 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
-
-
-
... More
Flushing water transfer Pump (To OHT of Hospital)
Location - STP Plant Room (1W+1SB)= 1set
Capacity - 2.5 LPS.
-
-
-
... More
Providing, fixing, testing & commissioning of MSEP water softening plant (suitable for 3 Kg/Sqcm working pressure) complete with initial charge with T-40 NA Resin, multiport valve with built in ejector for controlling all operations) regeneration system and HDPE tank, pressure gauge at inlet, outlet and back wash (each with isolation cock), valves, fittings and water hardness testing kit & associated works. Softener shall be suitable for the following duty: Velocity in frontal pipe and valves : 1.8 m/s
Test pressure : 5.5 Kg/cm2
Output soft Water Rate : 2.0 LPS Working pressure : 3.0 Kg/cm2
Outgoing hardness wii be: 10 ppm
Inlet hardness considered :300 ppm & TDS 1200 ppm
OBR :50 KL
Brine tank (HDPE) capacity : 2000 Lits
-
-
-
... More
Ground Floor
905
-
-
... More
BUS BARS
1000 Amps TPN, 25 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
BUS COUPLER
2 Set of ACB, 800 Amps, 50kA, 4 Pole, (EDO) without release with Electrical interlocking arrangement with incomer breakers as per single line diagram, Motor wound spring charged closing mechanism, horizontal Drawout type including Auxilary contactor & control MCB's. if any.
OUTGOING
3 No.ACB, 800 Amps, 50 kA, 4 Pole, Microprocessor release Motor wound spring charged closing mechanism (MDO), horizontal Drawout type with all protection i/c Earth fault, reverse On-screen display of measurements, Current : phase/neutral/earth, average, max, % loading, seq components, Voltage : Phase, Line, Average.
3 No. 630 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA, with microprocessor based release unit with ROH.
2 No. 200 amps TP+N Ics= Icu 25 kA, Moulded Case Circuit Breaker with Thermal release unit with ROH.
1 No. 125 amps TP+N Ics= Icu 25 kA, Moulded Case Circuit Breaker with Thermal release unit with ROH.
7 No. 100 amps TP+N Ics= Icu 25 kA, Moulded Case Circuit Breaker with Thermal release unit with ROH.
Each outgoing feeder shall provide with Indication Lamps, LED type, for RYB with 2 Amp control MCB& breaker 'ON', 'OFF', 'TRIP' lamps with 2 Amp control MCB.
Each outgoing feeder shall provide with Digital Energy Meter with CT's.
Provision shall be made for connection for control cables.
-
-
-
... More
Supply, installation, testing and commissioning of CAT-6 Patch cabel as per EIA upto 1.2mtr length as required.
1024
-
-
... More
15,000 CFM (25mm st. pr, 800 mm Dia Axial Fan, 3.7 KW, 1450 RPM Fan Motor, Direct Driven)
6
-
-
... More
Constructing masonry Chamber 30 x 30 x 55 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and180 mm deep (inside) with chain lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.
-
-
-
... More
Providing and fixing 75 mm single equal plain invert branch of required degree.
210
-
-
... More
Twin rubber stopper
591
-
-
... More
2ND FL
148.25
-
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
534
-
-
... More
Grilles, Diffusers, VCD
Supply, installtion and testing of Powder coated Aluminium extruded grills / diffusers as per specifications given in tender and of following sizes.
-
-
-
... More
1st Floor
1530.28
-
-
... More
FRP Induced Draft Cooling Tower (250 TR) CTI Certified
-
-
-
... More
40 mm dia. (32 mm thick insulation)
420
-
-
... More
20 mm nominal bore
3
-
-
... More
For Hot Water Generator (240 Kw Each)
-
-
-
... More
250mm dia SW /RCC pipepipe
400
-
-
... More
Providing & fixing Cast steel ball valves of the following sizes suitable for pressure of 10 kg/sqcm complete with all necessary fittings
-
-
-
... More
Providing, fixing, testing & commissioning of Air Release Valve on top of each Hydrant riser of 15mm dia with full size NPT inlet and outlet connections with stop cock and drain arrangement, pressure gauge with gun metal stop cock complete with all accessories as required.
4
-
-
... More
Providing, fixing, jointing and testing in position the for drainage purpose following heavy class (Class B) M.S pipes conforming to IS:1239 cut to required lengths including two coats of synthetic enamel paint of approved shade over a coat of primer and all necessary fittings (All fittings shall confirm to IS:1879 (part 1 to 10) and specials such as bends, tees, unions, Reducers, flanges & plugs etc. fixing at wall /ceiling level supported by clamps, hangers (using anchor fastners) etc, as per specification and all as per Project Manager's / Consultant requirement. All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and the supply of the same shall also be included in rates under this head.
-
-
-
... More
200 mm dia. (32 mm thick insulation)
70
-
-
... More
Supply, Installation, Testing and Commissioning of 125 KVA 3 phase, 33 / 0.433 KV Outdoor type oil Filled type transformer copper wound with DNY II connection and neutral brought out for earthing. The transformer shall be confirming to IS : 1180 - 2014 and ECBC-2017. HT side cable termination box shall be suitable for 33 KV, 3 C x50mm2 XLPE cable and LT side cable terminal box shall be suitable for terminating of suitable rating of cables. The transformer shall be supplied with all accessories complete as per specifications on all respect.
1
-
-
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
90
-
-
... More
5th Floor
191.62
-
-
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
2842.2
-
-
... More
Submersible Sump Pumps (non cutter type) for transfer of plant Plant room waste water to EQT / dispoal (1 working & 1 standby) :-
Flow rate (each) = 2 LPS
Head = 15 m
-
-
-
... More
2ND FL Roof Beam
331.81
-
-
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers, complete in all respect as per the direction of the Engineer-in-charge.
470
-
-
... More
Providing and fixing weather proof lockable cabinet of size not less than 0.9 x 0.6 x 0.45 mtr made out of MS sheet of 20 gauge thickness having central opening and 4 mm thick glazed glass doors (Two No.) suitably marked on the outside with the letters "FIRE HOSE" including necessary locking arrangement and shall be painted with powder coating and two coats of synthetic enamel paint of approved shade.
-
-
-
... More
Exceeding 10.00 sqm and upto 16.80 sqm in the area
78
-
-
... More
Capacity of Each Pump LPM 1814
Pump Head (Mt) 18
Pump Motor HP (Indicative) 12.5
Pump Efficiency (Min) 80%
Variable Speed Pumping System for Secondary Chilled Water Pumps
-
-
-
... More
SS Tower Bolts
76
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
50 mm dia nominal bore
245
-
-
... More
50mm diameter pipe
166
-
-
... More
2 Gas Services ( O2, Vac, Air 4)
25
-
-
... More
EMERGENCY PANEL - 2 (1ST & 2ND FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
1 No. 63A FP MCB, 10 KA breaking capacity.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 60/5 amps 10VA 1 set of ON/OFF indicating light shall be protected by 6A MCB.
Bus Bars
100 Amps TPN, 25 kA for 1 sec. Copper bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
10 Nos. 25A DP MCB, 10 KA breaking capcity.
-
-
-
... More
65 mm dia
4
-
-
... More
40 mm nominal bore
12
-
-
... More
Supply, Installation, Testing and Commissioning of Manual Actuator Assembly complete with Flexible Interconnecting Hose, liver and manual pull station to activate the system manually.
8
-
-
... More
150 mm dia
2
-
-
... More
2ND FL
6195.42
-
-
... More
2ND FL
83.57
-
-
... More
40 amps
90
-
-
... More
Emergency Stop Push Button
Annunciator, 16 window with in Accept, Reset, Test & Mute Hooter Motorised Potentiometer for speed control
Motorised Potentiometer for voltage control
Battery Charger 24V / 25Amps
DG Selector Switch for ON/Off
DG Selector Switch for Auto/Manual/Test
1 set Aux. Contactor, 110VAC
1 Set Aux. Contactor, 24VDC
1 No: 16A, full wave Rectifier, 24V DC
1 No: Panel Lamps with Toggle Switch
1 No: Door Switch
1 No: Space Heater - 100 Watt
Necessary Indicating Lamps 1 Set : Three Phase Indicating Lamps Necessary Push Button
MCB - SP - as required
MCB - DP - As required
Five push buttons – start, stop, reset, test and accept.
-
-
-
... More
3.5 core, 50 Sq.mm.
254
-
-
... More
150mm dia SW /RCC pipepipe
900
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
60
-
-
... More
65 mm dia. (32 mm thick insulation)
210
-
-
... More
MASTER ALARM
1
-
-
... More
Two Cylinder Emergency N2O Manifold with two stage High flow rate regulator with NRV for every cylinder and copper tail pipes .
1
-
-
... More
Single pole
3140
-
-
... More
Supply, Installation, Testing and Commissioning of LED Post Top as Gate Light with a system lumen output of 2300 lumens and a minimum system efficacy of 85 lm/W. The luminaire shall have a rated system lifetime of 25,000 burning hours at L70. The luminaire should have a color temperature of 3000K and CRI 70. The luminaire shall meet IP65 with THD 20% and PF 0.9. The luminaire shall have closed diffused optics with polycarbonate diffuser board. The total power consumption should not exceed 27W (including driver). Similar to BGP161 LED2300/WW PSU 220-240V 7043 IN/Cromption-LPTH20-CDL/ENDO
10
-
-
... More
Steel rope with cover
160
-
-
... More
3 core, 25 Sq.mm.
20
-
-
... More
SMOKE EXTRACTION PANEL-1
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
2 Nos. 200 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
1 No Fixed type Automatic transfer switch 200 Amp rating in open frame with live to live transfer time 200ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS.
-
-
-
... More
Lift Panel - 1 (Typical for Lift Panel-2, Lift Panel-3) described as above
3
-
-
... More
The cable should have flexibleJacket and ripcord for easy stripability
5104
-
-
... More
Providing & fixing CI `Y' Strainer (screwed/ flanged) with stainless steel fine wire mesh perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete as required (on pump suction).MAKE: ZOLOTO /AXIN/SKS
-
-
-
... More
Size 600x450x200 mm
27
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
65
-
-
... More
Head - 60 M.
2
-
-
... More
For Vent Fan Motor of 9.3 / 11 Kw
1
-
-
... More
POWER PANEL - 3 (SECOND FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
1 No. 400 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 400/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set
Bus Bars
500 Amps TPN, 25 kA for 1 sec. Copper bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
5 Nos. 25A FP Miniature Circuit Breaker, 10 kA breaking capacity.
3 Nos. 40A FP Miniature Circuit Breaker, 10 kA breaking capacity.
16 Nos. 63A FP Miniature Circuit Breaker, 10 kA breaking capacity.
-
-
-
... More
Vacuum System
Penta plex 7V Vacuum Pumps of Ingersoll with Motor each with receiver vessel, with bacteria filter capacity.The system to provide duplex/cascade vaccum system for automatically start and stop at 480mm and 650 mmHG
1
-
-
... More
16 G
120
-
-
... More
4TH FL
125.24
-
-
... More
50 mm thick
136
-
-
... More
Supply, installation, testing and commissioning of Cubical type sectinalised floor standing switch board by CPRI apprved firms of 18 MVA fault capacity at 415 V complete with 4 strip, 125 A capacity Aluminium Bus - Bar Electrolytic grade E-91, cable alley, switchgears suitable for AC-23 duty & of following capacity & as per specification given in the tender.
Incomer
100 A 4 Pole MCCB with (0-100A) ammeter with three CT and selector switch, (0 - 500 V) voltmeter with selector switch, phase indication light with protection with protection fuse, on / off indicating light with protection fuse. SET 01 Outgoing
a) For Air-washer Fan Motor of 1 x 11 Kw 63 A TPN MCB with 25 A star delta starter, overload relay, start/stop push buttons, ammeter (0-60A) with three CT & selector switch, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch. SET-01 b) For Air Washer Pump
16 A SP MCB, SET-1
c) For Fan Motor of 7.5 Kw 40 A TPN MCB with 16 A star delta starter, overload relay, start/stop push buttons, ammeter (0-40A) with three CT & selector switch, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch. SET-01 Controls & interlocking accessories as required. Lot
-
-
-
... More
Grilles, Diffusers, VCD
Supply, installtion and testing of Powder coated Aluminium extruded grills / diffusers as per specifications given in tender and of following sizes.
-
-
-
... More
200 mm
210
-
-
... More
For 75 mm dia pipe
882
-
-
... More
Capacity: suitable for 120 KLD STP sludge generation
Supply of Microprocessor Based Electo Magnetic Flow Meter for Total Plant Capacity of 120 KLD for flow rate, totalizer with all accessories for inlet flow measurement post sewage transfer pump & MBR outlet
2
-
-
... More
Cost shall be inclusive of PVC flexible Hose pipe ( for piping submerged in effluent) with M S epoxy piping (for piping non-submerged in effluent)
-
-
-
... More
Door Locks
200
-
-
... More
150 mm width x 50mm depth x 1.6 mm thickness.
3
-
-
... More
OT UPS INCOMING PANEL - 1, 2 (4TH FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
2 Nos. 100 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
1 No Fixed type Automatic transfer switch 100 Amp rating in open frame with live to live transfer time 200ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS.
-
-
-
... More
Supply, Installation, Testing and Commissioning of 33kV,10kA , 1-ph, Outdoor, Gapless/Lightning/Surge Arrester complete with insulating base,Terminal connectors etc complete for installation,Testing & commissioning.
3
-
-
... More
Metering & Indication 1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs for each incomer.
1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 400/5 amps 10VA 1 set of ON/OFF indicating light shall be protected by 6A MCB for each incomer.
Bus Bars
500 Amps TPN, 25 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
4 Nos. 160 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
6 Nos. 100 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
1 No. 63 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
-
-
-
... More
Required for : Raw water tank to STP (MAKE UP PURPOSE)
1
-
-
... More
PORTABLE CHMICAL FIRE EXTINGUISHERS
Supply, installation, testing and commissioning of following types of extinguisher with provision of wall bracket (fixed with anchor fastner).
Supply, Installation, Fixing of CO2 type Fire Extinguisher of capacity 4.5 kg (6.8 Liter) confirms to IS 15683, bearing ISI mark, consisting of High Pressure seamless steel cylinder (IS 7285) and duly approved by Chief controller of Explosive Nagpur, fitted with wheel type valve, fully charged with CO2 gas (IS 15222), with non-conductor of electricity discharge PVC horn along with Bend Pipe, internally siphon tube & mounting brackets having fire rating
54
-
-
... More
For 7 bar
4
-
-
... More
Supply, Installation, Testing and Commissioning of Abort Switch
8
-
-
... More
Exchange described as above
1
-
-
... More
Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge.
30
-
-
... More
3C x 1.5 Sq. mm
350
-
-
... More
200 mm dia
20
-
-
... More
5th Floor
46.49
-
-
... More
With common burnt clay F.P.S (non modular) bricks of class designation 7.5
4
-
-
... More
90 mm dia (OD-90 mm & ID-76 mm nominal)
200
-
-
... More
63 amps
13
-
-
... More
METERING SYSTEM
Supply, Installation, Testing and Commissioning of support for overhead line 152mmx152mm and 13 meter long C pole of I.S. standard including base plate, welding, drilling of required hole etc. complete as required. R.S.J pole standard weight 37.10 kg/per metre. Cost also include the foundation RCC material of 1:6:8 ratio inclusing digging and backfilling complete as required.
2
-
-
... More
SOLAR HOT WATER SYSTEM
-
-
-
... More
Providing and fixing 150 mm single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.
10
-
-
... More
The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for ccupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places."
148
-
-
... More
Providing and fixing lime/alum/polyelectrolyte dosing system consisting of ABS dosing pump (0-6 lph) with 100 lit HDPE tank including all piping from the dozer to the reaction tank etc. complete in all respects.
3 nos. (alum/lime/polyeelctrolyte) in flash mixer & 1 no. in tube settler (alum)
4
-
-
... More
80 mm dia
18
-
-
... More
250mm dia RCC pipe
550
-
-
... More
Dumb bell with central bulb (180mm wide, 8mm thick).
150
-
-
... More
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
-
-
-
... More
3rd Floor
1041
-
-
... More
Trees Plant
100
-
-
... More
OUTGOING - 3 set of Outgoing each consisting of following -
1250 Amp. VCB with earth switch.
Microprocessor based numerical relay with O/L, E/F and highset S/C protection compatible .
Breaker control switch
240 V AC spring charging motor
Set of ON/OFF/TRIP indicating lamps.
Clear lamp for Trip Circuit healthy supply.
Aux. relays for Anti Pumping,Fault & indication.
Trip Circuit spervision relay.
Master Trip Circuit Relay
Individual alarm annunciator with 8 windows and buzzer, ACK, rest, test push button for individual transformer faults and electrical faults in respective window.
-
-
-
... More
80 mm dia. (32 mm thick insulation)
230
-
-
... More
Plinth beam
1889
-
-
... More
Supply, Installation, Testing and Commissioning of Discharge Nozzles to Discharge Novec 1230 Gas in the Hazard Area as hydraulic calculation and flow rate required in 180 Deg/360 Deg Discharge Pattern.
32
-
-
... More
2 core, 6 Sq.mm.
1243.96
-
-
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
86
-
-
... More
18 mm thick.
107
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 No.6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
23
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hingeswith necessary screws
1925
-
-
... More
Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 :
-
-
-
... More
Fire Damper
35
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters etc complete as per Engineer-in-Charge.
-
-
-
... More
3.5 core, 150 Sq.mm.
22
-
-
... More
Double Skin Floor Mounted AHU (For 100% Fresh Air OT) Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm polished SS sheet inside complete with supply & exhaust blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters for both supply & exhaust fan motor, power control panel with necessary switchgears incoming & outgoing for VFD, HRW & humidifier, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 8 row cooling & 2 row heating coil made of Aluminium finned Copper tube, Copper header with coil section, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame in both the supply & exhaust side of AHU, fine filter section with MERV 13 filters in extruded aluminium frame in supply after fan, (Hepa filters shall be at terminals along with laminar flow plenum & not to be included in the cost), Heat Recovery Wheel with HRW Section, mixing chamber, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers, coilotron UV section only of 600 mm in length in floor mounted AHU (Coilotron UV System quantified separately).
The AHU panels shall be insulated with 48mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. These AHUs shall have air inlet / outlet connection made of aluminium 20 G & all fixing arrangement / blank off shall be of SS The complete AHU shall conform to standard specication. The face velocity across cooling / heating coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows:
-
-
-
... More
2 run of cable
3823
-
-
... More
3,500 CFM, 45 mm St. Pr., 4 Row CC, 2 Row HC (CSU)
2
-
-
... More
Supply, laying and connecting of single pair PVC insulated FRLS twisted shielded copper conductor cable of 32/0.2 mm dia in existing conduit including all fixing accessories as required.
6853
-
-
... More
AHU PANEL - 1 (GROUND FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
1 No. 160 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 160/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set
Bus Bars
200 Amps TPN, 25 kA for 1 sec. Copper bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
6 Nos. 25A FP Miniature Circuit Breaker, 10 kA breaking capacity.
6 Nos. 40A FP Miniature Circuit Breaker, 10 kA breaking capacity.
2 Nos. 63A FP Miniature Circuit Breaker, 10 kA breaking capacity.
-
-
-
... More
4TH FL
146.44
-
-
... More
4 C x 2.5 Sq.mm.
16
-
-
... More
24 G (Up To 750 mm)
5110
-
-
... More
Raj Nagar Plain white marble/ Udaipur green marble/ Zebra
black marble
-
-
-
... More
supply testing and commissioning of ceiling fan 5 star rating enery efficient , including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including earthing and providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
503
-
-
... More
In area of light jungle
2.25
-
-
... More
EARTHING
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
360
-
-
... More
300 Pair
2
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
25
-
-
... More
Supply of Surface Mounted Led Down Lighter comprising of 12W LED with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 100 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job.
1048
-
-
... More
12,000 CFM (25mm st. pr, 800 mm Dia Axial Fan, 3.7 KW, 1450 RPM Fan Motor, Direct Driven)
11
-
-
... More
40 mm dia pipe, 13 mm Insulation
310
-
-
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.(For horizontal run)
925
-
-
... More
32 mm dia nominal bore
184
-
-
... More
Power Panel - 3 (2nd Floor) described as above
1
-
-
... More
4 core, 16 Sq.mm.
1621
-
-
... More
For 8,000 to 10500 CFM AHU
4
-
-
... More
32 mm nominal outer dia Pipes
581
-
-
... More
Supply of vent pipes of 100 mm dia with mosquito proof grating suitable for the ventilation purpose of the various tanks.
1
-
-
... More
Isolators
63 A 3 pole isolator switch with sheet metal enclosure, rain protection etc. as required to suit the site condition.
8
-
-
... More
80 mm dia
30
-
-
... More
up to plinth
3367.16
-
-
... More
Supply, installation, testing and commissioning of 1 Loop Microprocessor based intelligent analogue addressable, modular, expandable networkable, following loop (each loop consist of minimum 90detector & 90devices) fire alarm control panel with minimum 80 character LCD display, multiple access levels, event history file in non-volatile memory (EEPROM).The panel shall support programmable relay for controlling lifts, staircase pressurizations fans, lift shaft & lift lobby pressurization fans, toilets exhaust fans, ventilation fans, monitoring of fire sprinkler and fire hydrant pump controlled by powerful Boolean logic equation. The panel shall have minimum five independent hazard release circuit built-in the panel. The panel shall have 240 volts AC power supply, automatic battery charger, 24 volts, sealed lead acid maintenance free batteries sufficient for 24 hours normal working and then be capable of operating the system for 4 hours during emergency condition. The panel shall be UL/EN listed.
1
-
-
... More
Supply, installation, testing & commissioning of Float & Board type level indicator with isolation valve at top / bottom, & making the installation complete.
1
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
... More
4th Floor
46.49
-
-
... More
Supply, installation, testing and commissioning of Fire Terrace Booster pump (pressurisation pump) comprising of the following:
a. Horizontal end suction centrifugal pump, suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ A.C supply. The installation shall be complete with Flexible coupling and coupling guard, complete as required.
The pump casing shall be CI, shaft shall be SS & impeller/ shaft sleeve/casing wearing ring shall be bronze. The pump shall be provided with mechanical seal The system shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side. (The pump should meet the condition and shall be gotten approved by the Local fire Authority).
b. Squirrel cage induction motor TEFC type for operation on 415 V, 3 phase 50 Hz AC supply for the above pump with a synchronous speed of 2900 RPM with flexible coupling and coupling guard etc. as required.
c. Common base plate for (a) and (b) from M.S. channel as required size.
d. Suitable cement concrete foundation with plaster, (design and drawing to be provided by the Contractor while the foundation will be done by others) complete with Antivibration arrangement of cushy foot mounting.
For pump defined above & of duty as follows :
Flow 900 LPM
Head : 35 mts
2
-
-
... More
33 kV CABLE END TERMINATION Supplying and making cable end jointing with heat shink push on type , including lugs and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 33 KV grade as required :
-
-
-
... More
6TH Floor
134.87
-
-
... More
Supply of MBBR media consisting of Virgin PE carrier modules with Surface not less than 500 M2/M3 of suitable capacity and as per manufacturer's recommendation for Reactor tanks alongwith suitable sludge removal arrangement either by pumps or air lifting pumps.
1
-
-
... More
510x1040 mm bowl depth 200 mm
98
-
-
... More
200mm dia
5
-
-
... More
Approval from pollution board including consent to operate at initial & various other stages of works including preparation of report / drawings as per pollution board requirement,.
1
-
-
... More
Pressure Independent Balancing Cum Control Valve
Supply, Installation, Testing and Commissioning of following sizes electronic, self-balancing, pressure independent type dynamic balancing valve with integrated 2 way modulating control valve in a single body. The actuator shall be capable of accepting upto 10V DC and upto 20 mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum.
-
-
-
... More
Ultrasonic Humidifier For Selected AHUs
Supply, installation, testing and commissioning of horizontal floor standing Ultrasonic Humidifier with casters made out of 1.2 mm thick SS-304 sheet complete with Piezo transducers duly interlocked with Level switches. Control Panel made out of 1.2 mm thick CRCA sheet comprising of Incomer MCB, Contactor, On/Off switch, step down transformer, ventilation fan, Power and control wiring. The Ultrasonic humidifier shall be equipped with solenoid operated water makeup, Drain valve, Water Overflow connection with valve, Mist outlet connection, Water and Air filter assembly, Level switches for upper and lower water level and other controls as per tender specifications. All basic controls and terminals shall be located in an integral control cabinet factory wired and tested. Humidifier shall comply the tender specification & of following capacities:
-
-
-
... More
GF
319.6
-
-
... More
Supply, installation, testing and commissioning of Snap Acting, digital display, communicating type Humidistat at air-handler. RH Sensor for AHUs are also specified in BMS Part. Humidistat shall be installed in case BMS commissioning is significantly delayed.
2
-
-
... More
Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties, taxes of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge.
231
-
-
... More
50 mm dia
40
-
-
... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
MDB -T1,T2,T3 & T4(LIFT M/C RM )
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 50 kA symmetrical at 415 volts.
Incoming
1 No.125 amps 4 Pole , Ics= Icu 25 kA, Moulded Case Circuit Breaker with microprocessor based release unit with ROH having following protection;
• Overload (adjustable thermal)
• Short-circuit (fixed magnetic )
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital Electronic Energy Meter with necessary protection and port for BMS communication, 3 Nos. 125/5 amps 10VA Phase indicating light shall be protected by 6A MCB. - 1 Set
Bus Bars
150 Amps TPN, 25 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
-
-
-
... More
Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
50
-
-
... More
2ND FL
942.31
-
-
... More
Foundation
8
-
-
... More
Column
-
-
-
... More
250 mm dia pipe
200
-
-
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineerin-Charge.
-
-
-
... More
Providing and fixing 100 x 100 x 100 x 100 mm double equal plain invert branch of required degree.
49
-
-
... More
3rd Floor
46.49
-
-
... More
Supply and stacking of plant Calliandra hybrida of height 75-90 cm. with 4- 5 branches in bag of size 25 cm as per direction of the officer-in-charge.
70
-
-
... More
3 core, 16 Sq.mm.
2
-
-
... More
Providing and fixing of commercial UV unit of water flow rate 2.0 Lit/min. Including all components as per manufacture specifications, including connection from water supply line, and final connection to water cooler electric wiring & plug top etc. with all accessories.MAKE:ALPHA UV/ CREATIVE UV/ PENTAIR/EUREKA FORBES.
11
-
-
... More
Supply, installation, testing and commissioning of sight tube (of 3.5 to 4 mm length) with isolation valve at top / bottom, demarcation on tube for making the installation of level indication on the RCC water tank complete.
10
-
-
... More
Ground Floor
2948.62
-
-
... More
Providing and fixing heavy class MS suction & delivery headers of required length conforming to IS:3589 with welded joints standard MS Fittings and with end flange connections having inlet & outlet flanged connections including MS supports from wall, floors & ceiling complete as required. Cost should be inclusive of all supports / clamps / brackets, anchor fastner as required (all in GI). All hangers, clamps, brackets etc. shall be of MS duly painted with two coats of synthetic enamel paint with coat of zinc primer unless specified otherwire and then supply of the same shall also be included for rates under this head. (MAKE: JINDAL STAR/JINDAL HISSAR/SURYA PRAKASH)
-
-
-
... More
40 A 3 pole isolator switch with sheet metal enclosure, rain protection etc. as required to suit the site condition.
6
-
-
... More
600 mm long towel rail
120
-
-
... More
Supply, Installation , Testing and Commissioning of Analog Caller ID Speaker Phone.
50
-
-
... More
4 core, 2.5 Sq.mm. Cu. Conductor cable
550
-
-
... More
Making rain water harvesting pit in rectangular shape, Finished size upto 3.5 m x 2.0 m x 4.0m or circular shape, finished size upto 3.0 m dia and 4.0 height. Including all the civil work (earth work in all type of soil), providing and laying in position P.C.C & R.C.C, required centering and shuttering, reinforcement steel, erecting brick work in FPS bricks of class designation of cement mortar in 1 : 6, laying 12 to 15 mm thick cement plaster of 1 : 2 : 4 (1 Cement : 4 Coarse sand : 4 fine Sand) as per drawing or as per direction of engineer - in- charge.
-
-
-
... More
a) 24 G (Up To 750 mm)
630
-
-
... More
Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality.
-
-
-
... More
5TH FL & Terrace Floor
350.81
-
-
... More
Supply and stacking of plant Caesalpinia pulcherrima species of height 45-60 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge.
70
-
-
... More
Upto 5mm depth and 5 mm width
19120.9
-
-
... More
Y-strainer
-
-
-
... More
300x10 mm
902
-
-
... More
19 mm dia. (19 mm thick insulation)
170
-
-
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
-
-
-
... More
20+20 size manifold extendable type complete with middle frame with chain for individual cylinder (bulk cylinder D-type) along with Non-Return Valves for every cylinder and copper tail pipes .
1
-
-
... More
Raft
5913.37
-
-
... More
3RD FL Roof Beam
342.81
-
-
... More
Providing & fixing of cp brass soap dish of approved design and make. (Make : Jaquar - Model No. ACN 1131N OR Equivalent as per list of approved make)
120
-
-
... More
Providing and fixing of vitreous China Sanitary fixturs and CP fitting and other accessaries for Handicapped toilet . Each Matrix Set shall comprised (Wash Basin 65 x 35 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no hinged rail 76 cm and five nos of grab rails 60 cm). complete all respect.(Make : Hindware Cat no. 70002 (Matrix Set-1)OR Equivalent as per list of approved make)
5
-
-
... More
50 mm dia
635
-
-
... More
up to plinth
291
-
-
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
65 mm dia
18
-
-
... More
Capacity : 10 M3/hr @ Discharge Head 20 M head (1 Working + 1 Standby) From tube settler tank to equalization tank of STP
1
-
-
... More
3 Core 185 Sq.mm (indoor)
8
-
-
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
2845.58
-
-
... More
6th Floor
24
-
-
... More
3.5core, 240 Sq.mm.
831
-
-
... More
Supply ,Installation ,Testing and commissioning of corridoor indication consisting of: DUAL direction LED indicator
-
-
-
... More
Supplying, installing, testing & commissioning of Bronze Ball valve and air dispersion grid as required for STP as described above.
1
-
-
... More
Terminal Units (Gas Outlets) with probes/Adaptors as per NFPA, CSA UL Listed as per NFPA 99, -
12
-
-
... More
BUS COUPLER
3 Set of ACB, 1000 Amps, 100kA, 4 Pole, (EDO) without release with Electrical interlocking arrangement with incomer breakers as per single line diagram, Motor wound spring charged closing mechanism, horizontal Drawout type including Auxilary contactor & control MCB's. if any.
3 Set Indication Lamps, LED type, for RYB with 2 Amp control MCB & breaker 'ON', 'OFF', 'TRIP' & spring charged lamps with2 Amp control MCB.
-
-
-
... More
Main LT Panel / Capacitor Panel described as above and as per specification complete in all respects.
1
-
-
... More
1ST FL
5196.83
-
-
... More
Ground Floor
950.28
-
-
... More
50 mm dia
15
-
-
... More
Event Management Software Providing, Installation, Testing and Commissioning of Software pack on the Management Center for automati-cally handling of all events in the entire communications system, e.g. calls, presences, call acknowledgements, presences etc.
This indication and analysis of the data is through a browser which has password-protected access to the XML data on the server. Various filters make it easily to find and display the required information.
1
-
-
... More
22mm OD X 1 mm thk
3200
-
-
... More
INTERNAL & EXTERNAL WATER SUPPLY
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on Wall
-
-
-
... More
For Motor of 7.5 to 11 Kw
-
-
-
... More
300 - 400 CFM (8mm static pressure, single phase)
2
-
-
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
50 to 80 mm nominal bore
25
-
-
... More
INTERNAL WIRING:
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
LIGHT PANEL - 1 GROUND & FIRST FLOOR
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
1 No. 100 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 100/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set
Bus Bars
150 Amps TPN, 25 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
12 Nos. 25A FP Miniature Circuit Breaker, 10 kA breaking capacity.
-
-
-
... More
Kitchen sink with drain board
-
-
-
... More
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.
-
-
-
... More
Area of slab over 0.50 sqm.
200
-
-
... More
Providing and fixing of clinical lever range elbow operated CP Brass Wall Mounted Single lever Basin Mixer with wall flange, extended operating lever, swinging spout and surgical purpose handle complete with all accessories as required with flow rate of 6.0 LPM complying to Green Building requirements and making good the walls wherever required. (Make :Jaquar - FLR -5033B OR Equivalent as per list of approved make)
87
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 3 Nos. 3 pin 5/6 A modular socket outlet and 3 Nos. 5/ 6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
181
-
-
... More
65 mm dia (CI Housing - PRV)
4
-
-
... More
Inline Fans
Supply, installation, testing and commissioning of Inline fans with motor complete in all respect & of following capacities. The casing of inline fans shall be acoustically lined & shall be selected for lower noise level. Fan motor shall have inbuilt speed controller.
-
-
-
... More
2ND FL
272.4
-
-
... More
Providing and fixing 75 mm plain bend of required degree.
65
-
-
... More
Supply & laying of 25 x 6 mm GI strip recess / surface as strip earth lead including soldering etc. as required.
90
-
-
... More
Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test” Tests to be conducted on site 6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000ml”
1182
-
-
... More
Linear pneumatic heat Detection Tube with all necessary fittings & supports.
600
-
-
... More
Manual Balancing Valves
Supply, installation, testing and commissioning of manual balancing valves in return chilled and condenser water line of each chiller, condenser and cooling tower as per tender specification & of following sizes:
-
-
-
... More
1 or 2 Module (75 mmX75 mm)
767
-
-
... More
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and m anufacture, including applying additional coats wherever required, to achieve even shade and colour.
-
-
-
... More
25 mm dia nominal bore
69
-
-
... More
Emergency Panel - 1 (Ground Floor) described as above
1
-
-
... More
80 mm dia
2
-
-
... More
150x10 mm
483
-
-
... More
Terrace Floor
14.4
-
-
... More
Feed pump to solar hot water tanks (1W+1 S)- Location -Terrace
1
-
-
... More
25 mm
38230.73
-
-
... More
40mm dia steel short piece
4
-
-
... More
76 mm OD X 1.5 mm thk
90
-
-
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with flush valve, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required. MAKE:- Hindware Cat no-60002-Urinal OR Equivalent as per list of approved make)
58
-
-
... More
Ground Floor
5319.5
-
-
... More
Supply, Installation, Testing and Commissioning of MS angle 50x50x6 -4kg per meter
100
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
817.58
-
-
... More
Supply, Installation, Testing and Commissioning of Master Cylinder Kit complete comprises of Electric Control Head operated electrically from the detection and control system or locally with a manual actuator, complete with cylinder supervisory switch.
8
-
-
... More
450 mm width X 50 mm depth X 2.0 mm thickness
226
-
-
... More
100 mm dia
8
-
-
... More
3 run of cable
3898
-
-
... More
50 mm dia pipe , 19 mm Insulation
90
-
-
... More
Screened through sieve of I.S. designation 20mm
268
-
-
... More
Providing and fixing 100 mm SS 304 grade shielded coupling for Hubless centrifugally cast iron pipe.
5768
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
57084
-
-
... More
Kitchen sink Bowl
470x420 mm bowl depth 150 mm
10
-
-
... More
Axial Flow Fan For Lift Well, Lobby & Staircase Pressurisation, Fresh Air & Exhaust Air Ventilation etc.
Supply, installation, testing and commissioning of ceiling mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC (IE3) Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be suitable for 250 °C temperature rated for 2 hours. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan & Fan motor KW given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. Axial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete certified model appearing on AMCA web site shall be accepted. Complete Fan shall be tested and approved by UL in accordance with "Power Ventilators for Smoke Control Systems" for 250 °C for 2 hours.
Manufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for each fan sourced from that particular factory.
-
-
-
... More
3,000 CFM, 65 mm St. Pr., 4 Row CC, 2 Row HC
1
-
-
... More
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of : i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
GF
1671.51
-
-
... More
Using rough kota stone.
738
-
-
... More
20 mm nominal outer dia Pipes (SDR-11)
2734.74
-
-
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 600x600 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc. complete as per direction of Engineer-in-Charge.
4725
-
-
... More
25 mm dia nominal bore
50
-
-
... More
MAIN LT PANEL FOR RESIDENCE
Supply, Installation, Testing and Commissioning of Main LT Panel (Residence) cubicle type, made out of 14 swg CRCA sheet steel, totally enclosed, IP 42, protection free standing, floor mounting, dust and vermin proof,indoor, compartmentalised, powder coated painting suitable for operation on 3 Phase and neutral, 415v, 50 Hz AC supply system with busbars extensible on both sides, interconnections with 2.5mm2 size of FRLS copper wire, control circuit with breaker control switch & auto/ manual selector switch, spring charging indication, ammeter, ammeter selector switches voltmeter, voltmeter selector switches, indicating lamps CT's, multifunction meters internally wired, interlocking and having following incomer & Bus coupler and outgoing circuit breaker complete with releases for protection all as shown on drawing including supply & installation complete as required items and as per specifications:
-
-
-
... More
Supply & fixing HT danger notice plate of 250 mm x 200mm, made of mild steel sheet of at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required. (33 kV)
5
-
-
... More
H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded .
30
-
-
... More
Supply, Installation, Testing & Commissioning of SMF, 1.5 Mtr, LC Pigtails etc. complete as per 'Tender specification, UL listed.
14
-
-
... More
12,000 CFM, 70 mm St. Pr., 4 Row CC, 2 Row HC.
1
-
-
... More
For Fan Motor, 1 x 11 Kw Air Washer + 1 x 7.5 Kw Centrifugal Fan For AC Plant Room Ventilation
1
-
-
... More
Motorised Butterfly Valves
Supplying, fixing, testing and commissioning of following sizes Motorized Butterfly Valve with CI Body, SS Disc, O - ring and minimum PN-16 pressure rating, conforming to BS 5155, IS 13095, with IP-55 actuator, capable of accepting upto 10V DC , and upto 20 mA electric signal and providing similar transduced feedback output to control system as required.
-
-
-
... More
25 mm nominal outer dia Pipes (SDR-11)
1415
-
-
... More
Note:Contractor shall include in his rates for providing level controllers, pressure switches, wiring, cabling from level controller / pressure switch to panel etc. complete as required to operate the system automatic/manual. Pump shall be protected against running dry.
-
-
-
... More
900 mm width x 75mm depth x 2 mm thickness.
1
-
-
... More
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge.
-
-
-
... More
Pressurisation Panel - 1 described as above
1
-
-
... More
1.1 kV L.T CONTROL CABLE LAYING
1.1 kV L.T Cable Laying of one number armoured XLPE insulated and PVC sheathed control cable 1.1 kV of following size in the existing cable Trays/ Surface including providing suitable size clamp to secure the cable in tray/ surface as required.
-
-
-
... More
100 Pair
50
-
-
... More
Supply, installation, testing and commissioning of FRP Induced draft, cross / counter flow, twin fan, direct driven, site erected cooling tower of capacity as mentioned below based on the parameters given below and complete with PVC Fill, Louvers, Drift Eliminator, Weather Proof IP 55 TEFC Motor (IE3), Propeller Fan, FRP Basin with additional sump in the bottom of the basin on every outlet point to avoid vortex formation in the condenser water pipe line, Hot dip galvanised Steel Ladder, Stainless Steel hardware including nut, bolt, washer etc. The cooling tower shall conform to technical specifications given in the tender. The maximum allowable sound power at a distance of 1 M from the cooling Tower shall be less than 75 dB. Tower fan motor shall be suitable for VFD operation and operation of VFD system shall be based approach of cooling tower. Performance required for cooling tower is minimum 38.2 gpm/hp when tested according CTI ATC-105 procedure.
Water Flow - 3780 LPM (4 GPM / TR)
Designed Wet Bulb Temperature - 28.3 °C
Water Inlet / Outlet Temperature - 36.38 °C / 32.22 °C
Cooling Tower Basin Height - 300.0 MM Fan Motor HP - 1 x 10 / 12.5 HP, 960 RPM
-
-
-
... More
Ground Floor
3148.6
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with wooden moulded frame of approved make and design with 6 mm thick hard board backing etc. complete as per direction of Engineer-in-Charge.
0.81
-
-
... More
Fresh / Exhaust air louvers with bird screen & damper
43
-
-
... More
Supply, installation, testing and commissioning of 42U equipment rack made out of 2 mm thick CRCA sheet duly powder coated; in-built amplifier mounting; amplifier, controller, suitable for housing of above control equipment.
1
-
-
... More
Isolation Valves
-
-
-
... More
200 mm diameter
150
-
-
... More
Supply and stacking of Fly ash conforming to IRC- 58 at site including carriage, loading , unloading & stacking up to any lead (measured stacks will be reduced by 20% for payment) etc. complete as per direction of Engineer-in-Charge.
2520
-
-
... More
150 mm nominal outer dia Pipes (SCH-40)
50
-
-
... More
20,000 CFM (25mm st. pr, 1000 mm Dia Axial Fan, 7.5 KW, 1450 RPM Fan Motor, Direct Driven)
10
-
-
... More
Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.
26
-
-
... More
Pipes in False Ceiling / Shaft / Plant Room
-
-
-
... More
pH - 6.0 – 8.5
BOD - 250-400 mg/l
S. Solids - 200-450 mg/l
COD - 400-700 mg/l
Oil & Grease - 25-30 mg/l NH4N - 20-25 mg/l
Total Nitrogen -30-45 mg/l
TDS 1200 ppm
Ecoli - 1000000 MPN/100 ml
Effluent discharge standard after treatment
pH - 6.0 – 7.5
BOD - Less than 10 Mg/L
S. Solids - Less than or equal to 5 Mg/L
COD - Less than or equal to 30 Mg/L
Oil & Grease - Less than or equal to 1 Mg / L
Turbidity - Less than 1 NTU
Ecoli - 100 MPN/100 ml
NH4N - 05 mg/l
Total Nitrogen - Less than 10 Mg/L as N Sewage treatment plant shall include the following items:
Grit chamber ( RCC)
Screen Chamber ( MS)
Oil & Grease Trap ( MS)
Sewage equalization tank/sump ( RCC)
Anoxic Tank ( RCC)
MBBR Tank .( RCC)
Secondary Tube Settler tank ( RCC)
Sludge Holding Tank ( RCC)
-
-
-
... More
Supply, Installation, Testing and Commissioning of Valve Assembly and arrangement for Supervisory Switch connection for monitoring cylinder pressure, a pressure gauge with a safety burst disc and safety cap.
8
-
-
... More
2nd Floor
1011
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
1014
-
-
... More
SMOKE EXTRACTION PANEL-2
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 35 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
1 No. 125 amps 4P, Ics= Icu 25 kA, Moulded Case Circuit Breaker with Thermal based release with ROH. with overcurrent, inbuilt Earth Fault and short circuit with ROH.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 125/5 amps 10VA 1 set of ON/OFF indicating light shall be protected by 6A MCB.
-
-
-
... More
EARTHING
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.
34
-
-
... More
65 mm dia
32
-
-
... More
100 mm dia
2
-
-
... More
8 Passenger Elevator with duplex mode with 1900 x1700 meter shaft, machine room consisting of ACVVVF Panel,4800mm over head,1800mm Pit including withiring, 1.5 MPS speed, 6 No. Stops , 18 m (Approx.) travilling distance, 1300 mm x1100 mm car size with 800x2100mm car entrance and door opening for stracture with Automatic with Centre opening ACVVVF Motor Door operator with electronic / infrared sensor door detector, all floor opening in same side ,moon rock finish stainless steel and PVC Flooring with complete all respect as per specification.(for Nurse residence,Non teaching staff type-III&IV )
4
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Tee” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
Power Panel-2 (First Floor) described as above
1
-
-
... More
UPS Panel - 1 (First Floor) described as above
1
-
-
... More
1 core,95 Sq.mm
677
-
-
... More
Capacity : 2900 Lts.
4
-
-
... More
Group C (For Hospital)
995
-
-
... More
(1 working + 1 standby)
Domestic water transfer Pump & Soft water transfer pump (To OHT of Hospital)
Location - Plant Room (1W+1SB)= 1set & STP (1W+1SB)= 1set
Capacity - 5.0 LPS.
-
-
-
... More
Providing and fixing of fully insulated 55 mm thick wooden fire / smoke check door shutter using 31mm thick FR insulation with internal facia of 9mm thick calcium silicate board having density not less then 950 Kg/cum on both sides and faced with 4mm thick commercial ply facing including 15X55 mm size hardwood beading with fire and smoke seal of size 10 X4 mm fitted along vertical and horizontal edges of the shutter .The complete door system should be capable to achieve Two hour fire rating in accordance with BS:476 Part 20and IS:3614 part II.Rate to include 150x75mm Hardwood door frame duly embedded with Promseal Intumscent Smoke Strip as per manufacturer's specification all complete . The door shutter shall also have a vision panel 6mm thk, 200mm x 300mm / 300mm x 300mm fire rated glass ( to be paid saperately), surrounded with fire proof treated teakwood beading, all around complete in all respects as per manufactures specifications and direction of the Engineer-In-Charge.
808
-
-
... More
Supplying, installing, testing and commissioning of annunciation and indication panel with interlocking arrangement complete in accordance to specification with level controller (In Fire Water, Raw Water, Treated Water and Flushing Water Tank : High / Low Level Controller) etc with control cabling from field to MCC as required.
1
-
-
... More
EXTERNAL CABLING AND AREA LIGHTING
LT CABLES
Supply of XLPE insulated and PVC sheathed Aluminium conductor armoured cable of 1.1 KV grade confirming to IS : 7098:1988 with upto date amendments of following sizes
-
-
-
... More
Following indication for Hazard Index.
Leakage Lamp Zone
Current mA Colour 3-4 Green Safe Zone
5-10 Red Hazard Zone Alarm
1 No. orange colour lamp shall be provided for mains ON.
Suitable rating MCB’s shall be provided for all indicating lamps.
Audio / Visual alarm, test / reset PB’s including all accessories as required.
Outgoing MCB : 14 Nos. 20 amps DP MCBs.
Note:
All ELCB shall be of SI/HI-type.
Ventilation fans for cooling of isolation transformers shall be provided.
-
-
-
... More
terrace
753.96
-
-
... More
GF
301.4
-
-
... More
20 mm nominal bore
282
-
-
... More
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete as per direction of Engineer-in-Charge.
1025
-
-
... More
Double Skin Floor Mounted AHU (CC + HC + MERV 8 Filter)
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted horizontal type , fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters, power control panel with necessary switchgears incoming & outgoing, blower suitable for static pressure as required (Fan Static given below is for guideline), Blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 4 / 6 Row cooling coil & 2 Row Heating Coi made of Aluminium finned Copper tube with coil section, Copper Header, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers, coilotron UV section only of 600 mm in length in floor mounted AHU (Coilotron UV System quantified separately). The AHU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows. The AHU shall be with one set of commissioning filter which shall be replaced with actual filter.
-
-
-
... More
Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints :
-
-
-
... More
Valves & Strainer
Supply, installation, testing and commissioning of following valves in chilled / condenser water line as per specification given in the tender.
BUTTERFLY VALVE (MANUAL) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified.
-
-
-
... More
1st Floor
291.46
-
-
... More
Plain cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with labour,labour cess and T&P etc. required for the work complete as per the direction of the Engineer-in-charge.
87.42
-
-
... More
32mm dia (9 mm thickness)
256
-
-
... More
4X15 KVA UPS OUTGOING PANEL-1, 2 (4TH FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
4 No. 63 amps DP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release unit with ROH.
Metering & Indication for each incomer :
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 60/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set
Bus Bars
250 Amps DP, 25 kA for 1 sec. Copper bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
4 Nos. 63A DP MCB, 10 KA breaking capacity.
-
-
-
... More
Hot water mixing tank complete with insulation & MS supporting structure with access ladder duly paint with red oxide comprising of following:
Cold Water inlet PN 16 Butterfly / Globe Valve. - 1 Nos.
Cold Water inlet lineCheck Valve. - 1 Nos.
PN:16 Butterfly / Globe Valve - 1 Nos.
Spare outlet - PN:16 Butterfly / Globe Valve - 1 Nos.
Hot water return inlet Flanged 40 mm dia Bronze Globe Valve - 1 Nos.
Tank Drain connection PN 16 Ball Valve - 1 Nos.
Temperature sensor at mixing tank suitable for differential temperature setting shall be made for start / stop of the HWG and other. The control system shall be complete with necessary cabling / wiring along with support. - 2 Set
-
-
-
... More
Supply, installation, testing and commissioning of CISCO Make Layer-2, 24 port, CAT-6E, DATA switch in existing Rack as required.
2
-
-
... More
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
1182
-
-
... More
2 Gas Services ( O2, Vac, Air 4)
25
-
-
... More
Providing and fixing M. S. tree guard 50 cm square in plan, height 1.40 metre above ground level and 0.50 metre below ground level. The vertical members shall consist of four nos of angle iron of size 25x25x5 mm 1.9 long, one at each corner and 8 nos flat iron of size 25x5 mm 1.4 long. The vertical members shall be welded to 4 nos 25x6 mm M. S. flats placed horizontally around the vertical member of the cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground , including refilling the earth, compaction etc. complete. The tree guard shall be painted with two coats of paint of approved brand and manufacture over a coat of primer, complete in all respect.
100
-
-
... More
GF
107.21
-
-
... More
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
1ST FL
90.57
-
-
... More
Flow Rate : 120 KLD only
1
-
-
... More
Providing & fixing M.S. class ‘C’ (heavy duty) pipe & fittings like tees, elbows, junctions, unions, bends, plugs etc. RCC pipe sleeves of larger diameter to the provided wherever the pipes are crossing the wall / slab and sleeves as per Consultant’s requirement, including clamps hangers, nuts, bolts etc for pipe supports from wall / ceiling and wrapping of under Ground pipe with wrapping coating material including cutting and making hole in wall / slab and making good the same. Including a coat of Synthetic enamel paint over two coats of primer complete as required.
-
-
-
... More
Providing and fixing 100 X 75 mm unequal plain invert branch of required degree.
239
-
-
... More
Wall /Floor Mount Rack Enclosure Cabinet suitable for Data Patch Panel /Data switch , Constructed with a hinged wall mounting bracket and a sturdy steel frame, suitable to accommodate up to 200 lbs. of equipment in 15U of rack space. Four adjustable vertical mounting rails with square holes accommodate all standard 19-inch rack equipment. easy access to rackmounted equipment, the enclosure cabinet is hinged to swing away from the wall mounting bracket, perforated lockable side panels and front door, assuring generous airflow to keep equipment operating safely. The front door shall be reversible and the side panels are removable for easy access to equipment. The top and bottom panels of the enclosure include convenient cable routing ports.
-
-
-
... More
Panel shall be with additional End cap/Aluminum U / F Profile / Glazing Bar (mill finish) for ends as required. Panel shall be fixed over M S structural steel / MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings.
379
-
-
... More
HT AND LT CABLES
Supply of following sizes of XLPE insulated PVC sheathed aluminium conductor armoured power cable of 33 kV grade (33kV earthed system) conforming to IS 7098 (Part-II) amended upto date.
-
-
-
... More
2ND FL
2476.13
-
-
... More
Domestic Water Hydro-pneumatic with VFD (At Terracel)
Location - Plant Room (1W+1SB)= 1set
Capacity - 4.2 LPS.
-
-
-
... More
450 mm width x 50mm depth x 2 mm thickness.
2
-
-
... More
100 mm dia
4
-
-
... More
Providing, laying, jointing and testing in trenches the following sizes of MS class `C' (heavy class) pipes conforming to IS:1239 with accessories like fittings including tees, elbows, reducers, flanges, rubber gaskets, G.I. nuts, bolts and washers including excavation in all kind of soil, refilling, ramming, shoring, removing the excavated surplus material, providing adequate support to the pipe and making good the same complete as required. Rate shall include for dewatering necessary to execute the work. The pipe shall not be less than 1.0 m below ground level at any point.
Providing protection to embedded MS pipes and fittings by applying protective primer (@ 100 gm/sqm) thereafter wrapping 4 mm thick protection coating by thermo fusion process. Overlap shall be maintained at 15 mm. The application process shall be strictly according to manufacturer’s specification.
-
-
-
... More
INCOMER :-
3 No.ACB, 1000 Amps, 50 kA, 4 Pole, Microprocessor release Motor wound spring charged closing mechanism (EDO), horizontal Drawout type with all protection i/c Earth fault, reverse On-screen display of measurements, Current : phase/neutral/earth, average, max, % loading, seq components, Voltage : Phase, Line, Average.
3 No Fixed type Automatic transfer switch 1000 Amp rating in open frame with live to live transfer time 200ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS.
-
-
-
... More
100 mm width X 40 mm depth X 1.6 mm thickness GI Raceways
567
-
-
... More
uPVC Piping : Pumped effluent, Filter frontal and softner piping
-
-
-
... More
Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
2.3 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
... More
2 x 3C x 25 Sq. mm (Rate For Single Run)
180
-
-
... More
Providing of Non Clog Type Sludge loading / Disposal pump (working & stand by) in cast iron body with safety release valve, Non return valve and all necessary accessories with TEFC induction motor of class "F" insulation & efficiency class EFF-1, suitable for operation on 415 volts ±10%, 3 phase, 50 Hz, A.C. supply complete in all respects and as per specification with the following capacities: ( 1 W+1S)
-
-
-
... More
Head - 20 mtrs
4
-
-
... More
50 mm dia. (32 mm thick insulation)
460
-
-
... More
GF
1392
-
-
... More
Two coats
9199
-
-
... More
50 mm dia
8
-
-
... More
Supply, Testing & Commissioning, fixing of Fire fighting telephone Hand Set.
2
-
-
... More
ISOLATION PANEL FOR OT'S (10 KVA)
Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of (Pieco make ) isolation panels fabricated out of 14 gauge CRCA sheet steel incubicle compartmentalized wall mounted, dust and vermin proof with reinformcement of suitable size angle iron, channels T sections and / or flats wherever necessary including stainless steel door fitted with stainless screws (Degree of protection IP42). Knockouts shall be provided at the top of the panel. Panels shall be treated with all anticrossive process before painting.
Approval shall be taken in form of shop drawings before fabrication. Cadmimum plated hardware and conform to NFPA / UL / IS / IEC code of pratice shall be used with followings : 1 No. 63 amps DP ELCB 30 mA leakage current (primary side of transformer).
1 No. 63 amps DP MCB (Primary side of transformer).
Isolation Transformer
Rating : 10 KVA
Ratio : 1:1
Primary voltage : 230 V AC + 10%
-
-
-
... More
32 mm dia nominal bore
184
-
-
... More
Providing, fixing, testing & commissioning of MSEP water softening plant (suitable for 3 Kg/Sqcm working pressure) complete with initial charge with T-40 NA Resin, multiport valve with built in ejector for controlling all operations), regeneration system and HDPE tank, pressure gauge at inlet, outlet and back wash (each with isolation cock), valves, fittings and water hardness testing kit & associated works. Softener shall be suitable for the following duty: MAKE:ION EXCHANGE /EQUIVALENT
Raw water hardness 1000 Mg/L
Treated water harness 100 Mg/L
Regeneration Period 10 Hrs.
-
-
-
... More
Providing and fixing medium duty circular manhole cover with frame size 525 mm dia, total weight 116 kg complete in all respects. (For underground tanks) MAKE: NECO/ /EQUIVALENT.
8
-
-
... More
40 amps
99
-
-
... More
24 Port ,CAT-6 Loaded Patch Panel
27
-
-
... More
Providing and fixing 100 mm single equal plain invert branch of required degree.
100
-
-
... More
a) Screw Chiller, 200 TR (2W+1S), 140 Kw Each with VFD
b) CHW Pr. Pump for Chiller, 7.5 HP Each, (2W+1S)
c) CDW Pump for Chiller, 30.0 HP Each, (2W+1S)
d) CHW Sr. Pump - 12.5.0 HP Each, (2W+1S)
e) Cooling Tower Fan Motor, 3 x 12.5 HP (2W+1S) with VFD
f) HWG 240 Kw, Winter Heating & RH Control (1W+1S) g) HW Pr. Variable Pump, 7.5 HP, (1W+1S) Supply, installation, testing and commissioning of Cubical type sectinalised floor standing switch board by CPRI apprved firms of 31 MVA fault capacity at 415 V complete with 4 strip, 400 A capacity Aluminium Bus - Bar Electrolytic grade E-91, cable alley, switchgears suitable for AC-23 duty & of following capacity & as per specification given in the tender.
a) Incomer 630 A 4 Pole MCCB with overload, short ckt., earth fault, protection release, with 144 mm (0 - 600 A) ammeter with 3 CT and selector switch, 144 mm (0 - 500 V) Voltmeter with selector switch, phase indication light with protection fuse, on / off / trip indicating light with protection fuse. SET 02
b) Bus Coupler Bus Coupler for section A & B of 630 A capacity, four pole MCCB. SET 01 c) Incomer and bus coupler shall be mechanically & electrically interlocked to avoid paralleling of the two supplies. LOT
-
-
-
... More
Up to plinth
6025.48
-
-
... More
200 mm dia (For Condenser Out, Cooling Tower In & Out)
9
-
-
... More
Head - 45 M.
1
-
-
... More
GF
74.57
-
-
... More
13 mm
3700
-
-
... More
Double Skin Floor Mounted AHU (For OT With 12 ACH/Hr) Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit floor mounted fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm polished SS sheet inside complete with supply & exhaust blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, VFD with built in harmonic filters for both supply & exhaust fan motor, power control panel with necessary switchgears incoming & outgoing for VFD & humidifier, blower suitable for static pressure as required (Fan Static given below is for guideline), Blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 8 row cooling & 2 row heating coil made of Aluminium finned Copper tube, Copper header with coil section, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame in both the supply & exhaust side of AHU, fine filter section with MERV 13 filters in extruded aluminium frame in supply after fan, (Hepa filters shall be at terminals along with laminar flow plenum & not to be included in the cost), mixing chamber, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers, coilotron UV section only of 600 mm in length in floor mounted AHU (Coilotron UV System quantified separately).
The AHU panels shall be insulated with 48mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. These AHUs shall have air inlet / outlet connection made of aluminium 20 G & all fixing arrangement / blank off shall be of SS The complete AHU shall conform to standard specication. The face velocity across cooling / heating coil shall be limited to 152 MPM maxm. The AHU shall be with one set of commissioning filter which shall be replaced with actual filter. The capacity of Air-handlers shall be as follows:
-
-
-
... More
750 mm width x 75mm depth x 2 mm thickness.
25
-
-
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
-
-
-
... More
Providing and fixing Butter fly valve with nitrile seat and stainless steel stem with lever operation and cast iron body in powder coated finish, suitable for test pressure of 10Kg/sq.mm) with flanges, gaskets and necessary pad locking arrangement complete required.MAKE : ZOLOTO /AXIN/SKS
-
-
-
... More
125 mm dia. (32 mm thick insulation)
10
-
-
... More
SUPPLY OF L T 1.1 kV CONTROL CABLES
Supplying of following sizes of 1.1 kV grade PVC insulated copper conductor armoured stranded Control Cable conforming to IS :1554 complete as required and as per specifications.
-
-
-
... More
Ground Floor
678
-
-
... More
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
9
-
-
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run)
485
-
-
... More
20 mm dia. (19 mm thick insulation)
40
-
-
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
... More
4th Floor
2080.6
-
-
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer- in-chargeJAQUAR : ALD-769L OR Equivalent as per list of approved make)
325
-
-
... More
100 mm dia. (32 mm thick insulation)
360
-
-
... More
80 mm dia
235
-
-
... More
100 mm vent Cowl .
89
-
-
... More
150 mm dia (For Chiller)
3
-
-
... More
80 mm dia
12
-
-
... More
80mm dia
18
-
-
... More
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
20 mm
10331
-
-
... More
supply testing and commissioning of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required.
86
-
-
... More
In 75 x75 mm deep chase
458
-
-
... More
75 mm vent Cowl .
38
-
-
... More
4 core, 6 Sq.mm.
2963
-
-
... More
40 mm dia nominal bore
357
-
-
... More
50 mm dia
15
-
-
... More
Control & Relay Panels for 3 No. X 500 kVA DG Set
3set : Each DG Set comprising of the following : Digital KWH Meter - Digital KW Meter Digital Power Factor Meter Digital VAF Meter Temperature Scanner
1 No: Generator Protection Relay, microprocessor Based with MODBUS/Backnet RS485 Port as per following protection Voltage Restrained over current & earth Fault Protection (51V/51N)
Current unbalance - 46
Loss of Excitation - 40
Reverse Power - 32
Under Power - 37
Under / Over Voltage - 27/59
Under / Over Frequency - 81
Thermal overload Protection - 49
Breaker failure Protection High Speed Master Trip Relay - VAJH 13
Trip Circuit Supervision Relay
Numeric generator differential Bias % with dual adjustable slop with PS class CT’s on both side of alternator.
-
-
-
... More
4 core, 10 Sq.mm.
310
-
-
... More
GF
7048.9
-
-
... More
Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge
284
-
-
... More
3rd Floor
2080.6
-
-
... More
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):
-
-
-
... More
Labour charges for lowering including transportation
4
-
-
... More
New work (Two or more coats)
347
-
-
... More
Providing, laying, jointing, testing and commissioning of following sizes of pipes conforming to IS-1239 (up to 150mm dia) / IS-3589 (200mm dia and above) with all accessories like all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall / ceiling with clamps, hangers (using anchor fastners) as per specification. including cutting holes and chases in brick and making good the same to original conditions complete in all respects. All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head.. (MAKE: JINDAL STAR/JINDAL HISSAR/SURYA PRAKASH)
Welding of any kind on the galvanized support / hanger shall not be permitted including synthetic enamel paint of approved shade over a coat of zinc primer.
For wet riser System - MS `C' Heavy class pipe
-
-
-
... More
SAFETY EQUIPMENTS
-
-
-
... More
80x1.25mm M.S. laths with 1.25 mm thick top cover.
110
-
-
... More
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre).
-
-
-
... More
3 Gas Services ( O2, Vac, Air 4)
15
-
-
... More
4 core, 7 core, 12 core & 19 core, 2.5 Sq.mm. Cu. Conductor cable
15290
-
-
... More
Flow rate : 7.0 LPS each
Head : 30 Mts
-
-
-
... More
5TH FL
78.51
-
-
... More
50mm size CI bracket
4
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable as per EIA in the existing surface/ recessed Steel/PVC Conduit as required.
-
-
-
... More
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm
MS flat clamp)
715
-
-
... More
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
219
-
-
... More
100 mm dia
2
-
-
... More
SANITARY FIXTURES & FITTINGS
-
-
-
... More
Supply, installation, testing and commissioning of flush mounted outlets wired to T 568 A or B with British style faceplace. The plastic shall be high impact, flame-retardant, UL rate thermoplastic. Dust cover/ blank shall be provided to protect unused faceplate openings. Termination caps and plastic over should be provided to protect jack wiring. Quoted price shall be inclusive of 1.6 mm thick GI Boxes.
-
-
-
... More
Supply & laying of 4 SWG GI wire or in recess for loop earthing as required.
1800
-
-
... More
Providing & fixing 100mm x 50mm G.I. waste with reducing elbow & nipple cutting chases, the floor / slab, repairs complete as required and connection to GI / CI waste pipe.
143
-
-
... More
Providing and fixing of GI pipe complete with GI fiitings and clamps, including cutting and making good the wall as per direction of Engineer in Charge.
Internal Work - Exposed on wall.MAKE:JINDAL STAR/EQUIVALENT
-
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry etc. complete as per direction of Engineer-in-Charge.
4962
-
-
... More
6 Gas Services(O2,Vac,N2O,Air4,Air7,AGSS)
6
-
-
... More
Providing & fixing GM fire brigade connection (suction collecting head) consisting of 2 No. 63 mm dia instantaneous type male couplings with built-in check valves, 1 No. 150 mm dia sluice valve, 1 No. 150 mm dia non-return valve and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as required and as per IS:904-1963.(MAKE: OMEX/MINIMAX/NEWAGE)
3
-
-
... More
32 mm dia. (19 mm thick insulation)
69
-
-
... More
65 mm dia
2
-
-
... More
Laying and fixing of following sizes of one number PVC insulated and PVC sheathed/XLPE Power cable of 1.1kv grade on cable tray as required.
-
-
-
... More
H.T. Panel describe as above
1
-
-
... More
GI : Suspended air dispersion grid
-
-
-
... More
Providing Single Line Diagram on 5mm thick Aluminium sheet in A1 Size duly laminated.
1
-
-
... More
Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. Material shall confirm to ASTM 6063.
-
-
-
... More
3.5 core, 120 Sq.mm.
260
-
-
... More
Supply and stacking of plant Nerium oleander variegated of height 45-60 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.
70
-
-
... More
3RD FL
272.4
-
-
... More
Starter for Propeller / Inline fan (Single Phase)
Supply, Installation, Testing & Commissioning of modular type single phase motor starter up to 6A (Rating shall be as per motor) including 3" x 3" x 2.5" G.I. Box with modular, modular cover plate, conduiting and wiring from starter to fan etc as required at site. NOTE:
The AC contractor shall provide fire shunt relay contact in his panel wherever necessary along with auto / manual mode selector switch in the outgoing feeder for AHU Fan, Ventilation & Pressurization fan etc. to take fire input signal (Potential Free Contact). Cost shall be included in the panel price quoted by him.
102
-
-
... More
Providing and fixing of C.P. brass twin coat hook with PVC rawl plug & C.P. brass screw complete as required.Make : JAQUAR - Model No. ACN 1161 N OR Equivalent as per list of approved make)
271
-
-
... More
Supply, erection, testing and commissioning of splitter / tap off mounted in suitable sizes MS boxes for MATV system and shall be suitable for interactive system.
-
-
-
... More
80 mm dia nominal bore
30
-
-
... More
Domestic water transfer Pump (To OHT of Residence)
Location - Plant Room (1W+1SB)= 1set
Capacity - 2.0 LPS.
-
-
-
... More
Terrace
120.6
-
-
... More
4C x 1.5 Sq. mm
460
-
-
... More
Area Alarm (Touch Screen)
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
-
-
... More
Condenser Water Pumps Set
-
-
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete as per direction of Engineer-in-Charge.
59
-
-
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
12 way, Double door
13
-
-
... More
3RD FL
2505.78
-
-
... More
Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring ‘T’ with :
-
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
-
-
-
... More
3RD FL
6271.64
-
-
... More
Head - 45 M.
1
-
-
... More
Providing & fixing 24 gauge Chicken wire mesh on joints of RCC & Brick work before plastering including nails etc. complete as per the direction of Engineer-in-charge.
746.9
-
-
... More
OUTGOING
6 No. 125 amps TP+N Moulded Case Circuit Breaker Ics= Icu 50 kA,with microprocessor based release unit with ROH having following protection;
• Overload (adjustable thermal)
• Short-circuit (fixed magnetic )
9No. 100 amps TP+N Moulded Case Circuit Breaker Ics= Icu 50 kA,with microprocessor based release unit with ROH having following protection;
• Overload (adjustable thermal)
• Short-circuit (fixed magnetic )
2 No.80 amps TP+N Moulded Case Circuit Breaker Ics= Icu 35 kA,with microprocessor based release unit with ROH having following protection;
• Overload (adjustable thermal)
• Short-circuit (fixed magnetic )
2 No.40 amps TP+N Moulded Case Circuit Breaker Ics= Icu 35 kA,with microprocessor based release unit with ROH having following protection;
• Overload (adjustable thermal)
• Short-circuit (fixed magnetic )
25 KVAR capicitor-2 set
12.5 KVAR capicitor-2 set
4 Set each outgoing Indication Lamps, LED type, for RYB with 2 Amp control MCB& breaker 'ON', 'OFF', 'TRIP' lamps with 2 Amp control MCB.
Potential free contact shall be provided to remote starting facilities of each starter through BAS.
Wiring with space heater, thermostat and control MCB’s shall be provided all vertical sections of panel.
Suitable danger board shall be provided.
-
-
-
... More
Providing of Dieffenbachia (Meaclata) plant, having ht. 45 cm to 60 cm with 5 and above leaves, well developed, fresh and healthy & attractive varigated foliage in 25 cm size of Earthen pot / Plastic pot.
100
-
-
... More
Duct Insulation
Supplying and fixing of external thermal insulation on ducts with Aluminium Metalized Cross Linked Closed Cell Polyethylene FR-XLPE insulation, tape & adhesive (pidilite SR -998) as required of following thickness.
-
-
-
... More
Providing and fixing medium duty circular manhole cover with frame size 525 mm dia, total weight 50 kg complete in all respects. (For overhead tanks).
19
-
-
... More
32 mm dia. (19 mm thick insulation)
360
-
-
... More
4 core, 25 Sq.mm.
2
-
-
... More
Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
2 x 3C x 16 Sq. mm
80
-
-
... More
AREA LIGHTS
Supply, Installation, Testing and Commissioning of 70W LED based Street light, housing made up of Pressure Die Cast Housing LM 6 Alloy/ Anti Dust Exposed Lens,sturdiness and embossed brand name/logo name of manufacturer. The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of 18000 lumens. The fixture shall have a CRI of minimum 70. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK =08.The fixture driver should have an operating voltage range of 140-270 V, surge protection of =3KV, PF 0.9 , THD10% and SDCM5. The fixture should be top openable & easy access to the Gear Compartment. The driver should be BIS approved, fully potted and encapsulated with 440V Stress Voltage protection for 8 Hrs. High Cut off : 325V(+/- 15V) and Auto Restart function should also be available within the fixture.The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Similar to Philips BRP340 LED 184 CW HO SLC S1 PS 1xLED/Cromption-LSTN-170-CDL-A/ENDO
29
-
-
... More
Finishing walls with textured exterior paint of required shade :
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm
16502
-
-
... More
4 core, 35 Sq.mm.
319
-
-
... More
13,000 CFM, 75 mm St. Pr., 4 Row CC, 2 Row HC
2
-
-
... More
3RD FL
1808
-
-
... More
2nd
3949.96
-
-
... More
B) Control cabling (PVC insulated Copper conductor of 1.1 KV Grade armoured cable)
-
-
-
... More
The system shall be complete with variable frequency drive (VFD) suitably interfaced with other system components, hand / auto macro designed, 01 no. dedicated microprocessor based logic controller, software duly downloaded, tempearture Sensor / Transmitters, interfacing amongst all components and compatibility of I/O signals etc complete with other accessories as required. Operation of VFD system shall be based approach of cooling tower.
1
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
600 mm width x 75mm depth x 2 mm thickness.
10
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 Make : JAQUAR:CON-037KN OR Equivalent as per list of approved make)
-
-
-
... More
Aluminium Cladding on Chilled / Hot / Condensate Water Insulated Pipes
Supplying & finishing of insulated CHW / HW pipes with 24 G Aluminium sheet cladding with hand operated roller machine (Grooving Machine) & finally to be fixed with self tapping screws as per specifications & complete in all respect.
-
-
-
... More
Manual Balancing Valves
BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified.
-
-
-
... More
Valves & Strainer
Supply, installation, testing and commissioning of following valves in chilled / hot water line as per specification given in the tender. Valves shall be insulated as per pipe insulation material & thickness given above. BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/ hot water circulation as specified
-
-
-
... More
Providing and fixing 700mm long puddle flanges fabricated out of 6mm thick M.S. plates along with flanges of suitable size properly fixed in walls and top slabs of (for underground tanks & overhead tanks).
-
-
-
... More
65 mm dia
18
-
-
... More
200 mm dia pipe
90
-
-
... More
3 NOS. 250KVAR CAPACITOR PANEL (Each capacitor panel comprises as :
1 Set of 600A 25kA TPN Aluminium conductor busbar.
1 Set of Digital VAF Meter of suitable range for 3 phase, 4 wirre operation with LED display and CT's.
1 Set of Indication Lamps (LED type)for R,Y,B with 2 Amp MCB for controlling and breaker 'ON', 'OFF' & 'TRIP' with 2 Amp MCB for controlling.
1 No. Auto/Manual selector switch.
1 No. Microprocessor based intelligent, 10 step APFC relay with PF display.
-
-
-
... More
b) 22 G (751 to 1500 mm)
390
-
-
... More
1.0 TR, 5 mm external static
1
-
-
... More
150 mm dia
20
-
-
... More
150 mm dia
1382.26
-
-
... More
3rd
2408
-
-
... More
Supply of Submersible mixer for mixing in Anoxic tank:
1
-
-
... More
1 x 3C x 6 Sq. mm (Rate For Single Run)
70
-
-
... More
50 mm dia pipe
45
-
-
... More
Rates includes the cost of providing and laying, Fixing a) 400 mm thick coarse sand layer of 1.5 mm to 2.0 mm in size, b) 400 mm thick layer of gravel of 5 mm to 10 mm in size, c) 400 mm thick layer of of boulder 50 to 200 mm in size. d) Heavy duty manhole cover of 540 x 540 x 100 mm, one number
e) fixing heavy duty pvc rungs @ 300 c/c
f) fixing 250 mm dia to 450 mm dia inlet & outlet points g) boring of 400 mm dia hole in all soil base depth 40 Rmt
h) supply, fixing loaring 200 mm dia pvc Housing pipe base depth 10 RMT.
i) supply, fixing loaring 200 mm dia pvc Slotted pipe base depth 30 RMT.
j) supply and fixing 8 '' dia MS Clamp and MS CAP
k) supply and packing of pea gravel at the sides of pipe as per drawing.
l)development of tube well by air compressor m) Transportation of machinery and material
2
-
-
... More
Main LT Panel_ as described as above and as per specification complete in all respects.
1
-
-
... More
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Capacity : 7.0 LPS
1
-
-
... More
2nd Floor
367.58
-
-
... More
50 mm dia
8
-
-
... More
MCC-1 (STP Motor Control Centre)
Incoming
Desired Amps TPN MCCB with the following accessories:
a. Voltmeter 1 Set
b. ammeter with selector switch 1 Set
c. Phase indicating lamps - 1 set
Bus Bar
Desired amps TPN ( desired KA) aluminium bus bar with heat shrinkable insulation sleeves
-
-
-
... More
25 mm dia
4
-
-
... More
Supply, Testing & Commissioning, fixing of Analog addressable Multicriteria detector with mounting based LED, address switch to programme the detectors complete as required.
11
-
-
... More
NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.
-
-
-
... More
Supply, Installation, Testing and Commissioning of 33kV Drop out fuse rated current 6A/3A, complete with fuse carrier assembly,fuse base & Tube and mounted arrangment as per IS :9385 (Pt. I to III) or as ammended from time to time and Tech sepc. VoI-II .
1
-
-
... More
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
40654
-
-
... More
200 mm dia
3
-
-
... More
Oxygen Flowmeter with Humidifier Bottle .
268
-
-
... More
b) 19 mm dia auto air vent valve
40
-
-
... More
Providing, fixing, testing and commissioning of single stage, horizontal, centrifugal, 2 pole, 50 HZ, AC, monoblock pumps (as per IS : 9079) incorporating C.I. casing and frame, stainless steel shaft, bronze / SS impeller, TEFC induction motor directly coupled to the pump, IP44 protection, class B insulated, C.I. body, hydraulically and dynamically balanced to give vibration free operation, with mechanical seal arrangement, fixed on a base plate with suitable vibration eliminator pads complete with PCC foundation, bolts grouted in CC blocks of 1:2:4, suitably rated DOL / star-delta starter fixed inside main electrical panel complete with level controller, necessary wiring, pressure gauge on the delivery side and strainer on suction side, including non-return valve and isolating valves on suction and delivering sides as required, including suction and delivery headers complete in all respects.
-
-
-
... More
GF
4195.22
-
-
... More
Supply, Installation, Testing and Commissioning of Warning Signs and Plates for Inside Room and Outside Room application.
4
-
-
... More
Overhead informatory road signage
50
-
-
... More
4 Gas Services (O2, Vac, N2O, Air 4 )
2
-
-
... More
3.5 core, 185 Sq.mm.
6
-
-
... More
40mm dia
23
-
-
... More
Providing, laying, jointing and testing of following sizes of pipes conforming to IS-1239 with all accessories like all fittings (for pipes upto 50mm dia threaded forged steel fittings and for pipes above 50 mm dia MS fitting with welded joint shall be used) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers (using anchor fastners) as per specification and all as per Project Manager’s requirements including cutting holes and chases in brickwork and making good the same to original conditions complete in all respects. (MAKE: JINDAL STAR/JINDAL HISSAR/SURYA PRAKASH)
All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted.
Providing two coats of synthetic enamel paint of approved shade over a coat of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both direction arrow as per the approval of the Project Manager.
-
-
-
... More
Wiring for group controlled (looped) light point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
GF
4466
-
-
... More
40 mm dia
2
-
-
... More
GF
667.3
-
-
... More
65 mm dia. (32 mm thick insulation)
33
-
-
... More
Supply , installation , testing and commissioning of Supply, Installation, Testing & Commissioning of 3 MP PTZ Camera , ONVIF profile S , G and Q , UL,CE,FCC Certified , 30 X Optical Zoom , Focal length 4.3mm to 129 mm , 12 X digital zoom , Quad stream ,H.265 , H.264 video compression support , frame rate 25 FPS @ 3MP , 50 FPS @ 2 MP ,2 streams simultanepusly at 1920 X 1080 p ,Shutter Speed : 1/1 ~ 1/10000 sec , 360° endless Pan , -20° ~ 200° tilt , Pan Manual Speed : 0.1° ~ 300°/s , Tilt Manual Speed :0.1° ~ 200°/s , 256 presets , 120 dB WDR ,Edge analytics : Abandoned Object, Intrusion Detection, Tampering, Wrong Direction, Loitering Detection, Object Counting, Stopped Vehicle, Object Removal , Inbuilt IR LED , IR Distance upto 200 mtrs , IP 66. . (Approved make - Axis / Impulse / Avigilon/ Mobotix/ Algovision)
4
-
-
... More
15mm OD X 1 mm thk
4800
-
-
... More
20 G (1501 to 2250 mm)
70
-
-
... More
Fixing 18 mm Granite Stone of approved dimension area above 0.4 sqm (18mm thick) in Dados, treads of steps and landing on 12 mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
2nd Floor
1589.39
-
-
... More
40mm nominal bore
456
-
-
... More
Drilling of 200mm dia bore 0mtr to 45mtr(45*4=180)
180
-
-
... More
Supply, installation, testing and commissioning of 4 pair Category 6 LAN cable consisting of 24 AWG solid copper conductors and as per the specification.
-
-
-
... More
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) to R CC surfaces, with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Supply, installation, testing and commissioning of following Port ,CAT-6 Loaded Patch Panel as per EAI.
-
-
-
... More
Providing, Fixing, Testing & Commissioning of nitrle rubber insulation on hot water supply pipes.
-
-
-
... More
150 mm dia
19
-
-
... More
Supply of Surface Mounted Led UP/Down Lighter Bed Head LED with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 100 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job.
87
-
-
... More
100 mm dia
30
-
-
... More
Air piping shall comprise of pipes droppers/ laterals with MS (epoxy coated) Header complete with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, puddle flanges etc cutting chases & making good. Contractor to submit detailed P & I.
1
-
-
... More
Capacity of Each Pump LPM 688
Pump Head (Mt) 25.0
Motor HP 7.5
Variable Speed Pumping System for Hot Water Pumps
-
-
-
... More
LIGHTNING ARRESTOR
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required
12
-
-
... More
1ST FL
123.51
-
-
... More
4th
2980
-
-
... More
Supply, Installation , Testing and Commissioning of IP Phones.
242
-
-
... More
Plate type Heat Exchangers of 280000 Kcal/Hr Heat Transfer capacity (approx.) with Secondary 1 Set (1W+1S) heat transfer horizontal centrifugal pumps (to be located at terrace level/or as per site conditions) of 10m head, 200 LPM of reqd. H.P & IE-2 class motor with brass impeller, SS-304 shaft & CI casing (or as per manufacturer's standards meeting our technical parameters).
Pressure based Mixing Tanks of capacity 6000 lit with suitable capacity electrical back up, MOC is SS 316, of thickness min. 8 mm for shell & 10mm for Dishes, with 100 mm thick glasswool/rockwool insulation of K value between 0.028 to 0.033 W/mK & density 48 kg/cum with 24 SWG Aluminium cladding. Tank should withstand min. 6 kg/sqcm pressure. Tank shall be provide with hot water flow meter at inlet and outlet (approved by department of weight and measures, inlet / outlet, overflow / drain connection & GI vent pipe of adequate height / length, pressure guage at inlet/outlet.
-
-
-
... More
ELEVATORS
Design, manufactures, supply,installation, sting,commissioning, approvals / laisoning (All local / state/ central statutory bodies) and handing over in satisfactory working conditions of elevators as per specification.
-
-
-
... More
LIGHT PANEL - 2 (2ND TO 4TH FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
1 No. 100 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 100/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set
Bus Bars
15 Amps TPN, 25 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
18 Nos. 25A FP Miniature Circuit Breaker, 10 kA breaking capacity.
-
-
-
... More
54mm
3
-
-
... More
Providing and fixing 100 mm plain bend of required degree.
307
-
-
... More
1 core, 10 Sq.mm.
16
-
-
... More
150 mm dia
744
-
-
... More
1ST FL
2278
-
-
... More
1.0 mm thick
5516.15
-
-
... More
Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineerin- charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid) complete in all respect as per direction of Engineer-in-Charge.
14277
-
-
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
1416
-
-
... More
3rd Floor
980
-
-
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)
-
-
-
... More
Providing and fixing inspectors test assembly complete with test valve, sight glass sectional drain valve, 25mm and 50mm dia medium class (Class B) G.I. pipes conforming to IS:1239 cut to required lengths including threaded fittings,union with corrosion resistant orifice all complete strictly as per drawing. (MAKE:GIACOMINI/EQUIVALENT)
21
-
-
... More
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:
-
-
-
... More
Providing and fixing 100 mm single equal plain junction of required degree.
429
-
-
... More
With float glass panes of 5.50 mm thickness
1951.1
-
-
... More
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and jointsfilled with acid and/or alkali resisting cement as per IS : 4457,
In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) complete as per the direction of Engineer-in- Charge.
-
-
-
... More
100 mm nominal outer dia Pipes (SCH-40)
1533
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
952
-
-
... More
2nd Floor
265.46
-
-
... More
40 mm dia. (32 mm thick insulation)
49
-
-
... More
Non clog, Self Cleaning type air dispersion system capable of handling 3-5 cfm of air with oxygen transfer efficiency of 3-4% per / meter water depth. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired easily from plat form at the top. (Imported fine bubble membrane diffusers).
1
-
-
... More
3rd Floor
262.46
-
-
... More
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
Supplying, fitting and fixing vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm plain (Ivory) of approved make in floors on 25mm thick bed of C.M. (1:1) (1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, taxes, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.
-
-
-
... More
50 mm dia
1
-
-
... More
3RD FL
4659.55
-
-
... More
MGPS SYSTEM
Liquid Oxygen supply system One vessel of 1X20 KL Liquid oxygen VIE vessel system will be the primary (main) supply source In case of failure in liquid oxygen supply, it should automatically switch over to an secondary source oxygen manifold having 2 X 20 cylinders. Design should be state-of-the-art. The unit should consist of a double walled vertical vessel (inner pressure vessel made of stainless steel and outer vessel of carbon steel).It should be fitted with standard accessories and should be “passed” the standard inspection requirement at factory for VIE.
1
-
-
... More
40 mm dia. (32 mm thick insulation)
410
-
-
... More
65 AH
1
-
-
... More
32 mm dia nominal bore
75
-
-
... More
Providing, fixing, testing & commissioning of vertical MSEP filter with adequate dirt holding capacity. Fabricated from MS sheet as per manufacturer's specifications complete with intitial charge filter media including painting inside with two coats of non toxic epoxy and with one coat of zinc chromate two coats of synthetic enamel paint outside. Including concrete foudation with cement plaster complete as required. The filter shall also be provided with set of internals for raw water inlet and bottom collecting system. Complete with frontal piping (heavy) and butterfly valves designed on 1.50 m / sec velocity.
Filter for Domestic Water services.
Filteration Rate 14000L/Sqm/Hr
-
-
-
... More
Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
1.68 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
... More
Installation, testing and commissioning of Recessed Down Light/Surface Down Light fittings of all sizes above 25W and Upto 40W LED, complete with all accessories including connections etc. as required.
3799
-
-
... More
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m
-
-
-
... More
Power Panel-5 (Fourth Floor) described as above
2
-
-
... More
3.5 core, 95 Sq.mm.
701
-
-
... More
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.
-
-
-
... More
GAS SUPPRESSION SYSTEM
ROOM FLUDING FOR SERVER AND BATTERY ROOM -
Supply, Installation, Testing and Commissioning of Novec 1230, CCOE Approved 120.0 Ltrs. Cylinder :- 25m² , V:- 100 m³ for server Room
4
-
-
... More
25 mm dia
30
-
-
... More
300 mm dia
30
-
-
... More
Supply, Testing & Commissioning, fixing of Fire fighting telephone Jack as approved by consultant/Architect.
30.8
-
-
... More
40 mm nominal outer dia Pipes (SDR-11)
706.13
-
-
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 Set of G.I. nut bolt & spring washer spaced at 50mm)
40
-
-
... More
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Make : Jayna :Jupitor-SBSD-01 OR Equivalent as per list of approved make)
-
-
-
... More
40 mm dia
26
-
-
... More
Valves Boxes with Pressure Gauges
-
-
-
... More
DG Set & ACCESSORIES
Supply, installation, testing and commissioning of Diesel Generator Set comprising of 500 kVA prime continuous (actual) rating raditor coolled diesel Engine in acoustic enclosure with rated capacity of suitable BHP at 1500 RPM, direct electronic fuel injection type vertical 4 stroke, 6 cylinder, electronic governor, power command control module (Power Command 1.2, Cummins or equiv) along with base frame coupled to alternator capable of delivering true 500 kVA output at 47 Deg temprature (400 KW at 0.8 power factor) brushless type 415V, 50 Hz, self exciting alternator with residential silencer, Lube Oil System, Electronic Governor, Batteries, Battery charger, Instrumentation, 990day oil fuel tanks, Silencer with bellows, alarms, Engine Control Panel, AVM pads, AVR Panel, QDCT for syncronizing,Terminal arrangements including bus duct box with all other associated equipment / work as per specifications.
Note: Day oil storage tank fabricated from 4 mm thick MS plate. Tank shall include 450 mm ID manhole cover,level indicator and flanged connection for inlet, outlet,overflow drain and probe provision for level controller.Tank shll be mounted on 2 m hgh structure support with access ladder (painted with 2 coats of red oxide primer) The work should be as per Central Electrical Inspectorate/ Pollution control board standards. (Refer Particular specification)
3
-
-
... More
100mm dia
10
-
-
... More
Supply of Surface Mounted Led Down Lighter comprising of 18W LED with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 100 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job.
12
-
-
... More
Supplying and laying 6 SWG G.I. wire tie with cable as required.
5800
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
-
-
-
... More
On award of the work, contractor shall submit a schedule of construction in the form of a PERT chart or BAR chart for approval of the Project Manager.
Contractor must submit for approval shop drawings, that detail pipe routing and levels, showing location of other services at crossings etc., cable runs, route cable trays and all allied works and must be fully coordinated with other services, before execution of the works. All shop drawings will be made on Autocad and coloured prints has to be produced for site work.
The contractor shall, from time to time, clear away all debris and excess materials accumulated at the site failing which the same shall be done by Project Manager at contractor’s risk and cost and cost of clean up shall be deducted from the contractors prorata bill. After the fixtures, equipment and appliances have been installed and commissioned, contractor shall cleanup the same and remove all plaster, paints, stains, stickers and other foreign matter or discoloration leaving the same in a ready to use condition. Contractor shall demolish all stores, remove all surplus materials and leave the site in a broom clean condition
-
-
-
... More
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
Fan Coil Unit Supply, installation, testing and commissioning of GI powder coated fan coil units complete with fan, 3 speed motor, 3 row deep cooling coil, 1 row deep heating coil, aluminium filters MERV 8, filter box, double sandwitched insulated tray, ball valve with strainer at inlet & ball valve at outlet duly insulated with nitrile rubber as specified for pipe insulation, copper connection, rotary switch, supporting arrangement, electrical wiring etc. The fan shall be selected for 6 - 8 mm external static pressure as required & as per approved drawing. The complete fan coil unit shall have acoustically lined casing & shall be in line with the standard specification. The capacity of fan coil units shall be as follows. The FCU shall be with one set of commissioning filter which shall be replaced with actual filter.
-
-
-
... More
3rd
2184
-
-
... More
The contractor shall submit detailed GA drawings, flow diagrams, equipment list, power load requirement.
The contractor must do and provide in detail, design, calculations of all elements of the plant, electrical and mechanical work to satisfy adequacy of design
Contractor shall ensure submission of GOOD FOR CONSTRUCTION' stage architectural, structural, construction, electrical, mechanical and piping drawing, detailed GA drawings (Plan & Section), P & I diagram, schematic diagram for main components and additional components such as inserts, puddle flanges, vent pipes etc. for approval.
Design, Supplying, Installing, Testing & Commissioning of Sewage Treatment Plant capacity 120 KLD.
The plant proposed shall be 120kld with a main pump room. The plant is proposed to be installed in the Under-ground .Opening shall be provided on above for this purpose, for the following:
Nature of effluent - Domestic Sewage from Toilet use, kitchen waste and washing waste water.
-
-
-
... More
Laying of MV XLPE Cable 95 sq. mm to 185 sq. mm on cable tray
311
-
-
... More
LT PANELS
AUTO LOAD SHARING / SYNCHRONISING PANEL Supply, Installation, Testing and Commissioning of Auto Load Sharing / Synhronising Cum LT change Over Panel cubicle type, made out of 14 swg CRCA sheet steel, totally enclosed, IP 42, protection free standing, floor mounting, dust and vermin proof,indoor, compartmentalised, powder coated painting suitable for operation on 3 Phase and neutral, 415v, 50 Hz AC supply system with busbars extensible on both sides, interconnections with 2.5mm2 size of FRLS copper wire, control circuit with breaker control switch & auto/ manual selector switch, spring charging indication, ammeter, ammeter selector switches voltmeter, voltmeter selector switches, indicating lamps CT's, multifunction meters internally wired, interlocking and having following incomer & Bus coupler Air circuit breakers and outgoing Air circuit breaker/ Moulded case circuit breaker complete with releases for protection all as shown on drawing including supply & installation complete as required items and as per specifications (Panels shall be of TTA conforming to IEC 61439/1):
All ACBs shall have Ics=Icw for 1.0 secs for all ACBs
-
-
-
... More
Junction Box For FCU / Propeller / Inline Fan etc (Single Phase)
Supply, Installation, Testing & Commissioning of 4" x 3" x 3" G.I. Box with modular type 6A socket & switch, modular cover plate etc as required at site.
125
-
-
... More
Horizontal Self Priming Sludge recycling pump for STP (1 working + 1 Standby) :-
Flow rate (each) = 4 LPS
Head = 8-10 m
-
-
-
... More
Fixing of Kota tiles of minium thickness 25mm thick of premium grade of size above 0.10 Sqm. in floors over 25mm thick bed of cement mortar 1:1 (1cement:1course sand)and filling the joint with white cement mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour,labour cess with T&P complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
Size 90x80 cm
-
-
-
... More
Providing and fixing toilet paper holder.Make : JAQUAR:ACN-1151N OR Equivalent as per list of approved make)
-
-
-
... More
150 mm width x 50mm depth x 1.6 mm thickness.
15
-
-
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
100 mm dia
6
-
-
... More
HOT DEEP GI CABLE TRAYS, RACEWAY & JUNCTION BOXES:
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
750 mm width X 62.5 mm depth X 2.0 mm thickness
535
-
-
... More
Supply, Installation, Testing & Commissioning of 6 port Fibre Panel Rack Mountable with Loaded LC adapter plate,complete as per Tender specification UL listed
1
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
... More
Providing and applying single component based on pure polyurethane waterproofing system of approved make shall be applied directly above RCC slab after surface preparation by mechanical grinding, treatment of cracks with PU sealant or pre stripping with Polyester reinforcement mesh followed by application of primer coat & application of spray/hand applied PU waterproofing system applied at minimum 2kgs per sqmt evenly spread covering all horizontal and vertical areas. Wateproofing system shall be applied in two-three coats as per site requirement. The product shall be taken minimum 300mm vertically areas above FFL to be protected with two component UV Top coat. Single component PU waterproofing shall have 84% solid content, tensile strength of ≥2 MPa and elongation of ≥500% when tested, shall offer crack bridging capability. At terminations it is use a 50g/sqmt polyester fleece reinforcement as per manufacturer instructions. Including protection of waterproofing with 200GSM Geotextile followed by protection screed (payable extra). etc. complete as per direction of Engineer-in-Charge.
100
-
-
... More
Terrace
812.5
-
-
... More
Ground Floor
3880
-
-
... More
7 C x 2.5 Sq.mm.
40
-
-
... More
Supply, installation, testing and commissioning of Wall Mounted Cabinet Speakers of 15 W RMS power,with multitaps, handling capacity, inbuilt 100 V Line Matching Transformer, Internal Tappings, Trapezoidal Compact Design, Optimized for speech and music applications
5
-
-
... More
100 mm dia
30
-
-
... More
250 mm diameter
400
-
-
... More
Providing & fixing brass quartzoid sprinklers (UL approved) of 15 mm dia size, suitable for sustaining the pressure on the seat & water hammer effect. The type & temperature rating shall be as follows :(MAKE: OMEX/MINIMAX/NEWAGE)
-
-
-
... More
65 mm dia
18
-
-
... More
MATV,DATA & VOICE SYSTEM SYSTEM
Supplying and drawing co-axial TV cable RG-11 grade, solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
440
-
-
... More
Providing & fixing MS cabinet (to enclose above FB connection and draw out connection) fabricated from 16g MS sheet with full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and suitably mounted on a raised masonry platform as required (Approx 0.6m x 0.6m x 0.45m)
5
-
-
... More
100 mm width x 50mm depth x 1.6 mm thickness.
3
-
-
... More
Supply, Installation, Testing and Commissioning of Outdoor Type Metering Cubical for 33kV Mains Supply
1
-
-
... More
Meter Board -1,2,3 & 4 _described as above
4
-
-
... More
150 mm dia
5
-
-
... More
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
19343.09
-
-
... More
Wall Joint of 150 mm gap
346
-
-
... More
5TH FL
155.4
-
-
... More
Bus Coupler
1 No. 400 amps 4P, Ics= Icu 25 kA, Moulded Case Circuit Breaker with microprocessor based release with overcurrent and short circuit with ROH.
Metering & Indication 1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 set of ON/OFF indicating light shall be protected by 6A MCB.
Bus Bars
500 Amps TPN, 25 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
-
-
-
... More
H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded .
30
-
-
... More
Capacity : 7.0 LPS
1
-
-
... More
INCOMER :-
1 No.400 amps TP+N Moulded Case Circuit Breaker Ics= Icu 50 kA,with microprocessor based release unit with ROH having following protection :
• Overload (adjustable thermal)
• Short-circuit (fixed magnetic )
• Earth Fault
1 No.100 amps TP+N Moulded Case Circuit Breaker Ics= Icu 50 kA,with microprocessor based release unit with ROH having following protection :
• Overload (adjustable thermal)
• Short-circuit (fixed magnetic )
• Earth Fault
-
-
-
... More
80 mm dia
346
-
-
... More
15 mm nominal bore
852
-
-
... More
Supply, installation, testing & commissioning of Media in Tube Settler Quantity 3.4 m3 (APPROX.)
Type Corrugated MOC PVC
1
-
-
... More
50 mm nominal bore
38
-
-
... More
Above 120sqmm and upto 400 Sq.mm.
150
-
-
... More
System compressive of above as required
1
-
-
... More
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
3316.12
-
-
... More
Providing of Insulatiing mat 1 meter wide & 25mm thick to withstand 36kV dielectric strength as per IS 5424- 1969
10
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
20 mm Dia
40
-
-
... More
Thermometer
Providing & fixing in position the mercury in glass industrial type thermometers.
114
-
-
... More
1 run of cable
30284
-
-
... More
63 A TPN MCB with 25 A Star Delta starter, overload relay, start / stop push buttons, phase indication lights with protection fuse, on / off / trip indication lights with protection fuse, single phase preventer & auto / manual mode selector switch. SET-01 Controls & interlocking accessories as required. Lot
-
-
-
... More
5th Floor
249.28
-
-
... More
Vaccum Tank reservoir ( 3000 Ltrs Capacity)
Bacteria Filters Terminal Units (Gas Outlets) with probes/Adaptors as per NFPA, CSA UL Listed as per NFPA 99,
300
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
2650
-
-
... More
3rd Floor
559.62
-
-
... More
15 mm nominal bore
106
-
-
... More
3.5 core, 50 Sq.mm.
32
-
-
... More
Supplying and making end termination with brass double compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor Unarmoured cable of 1.1 KV grade as required.
-
-
-
... More
Supply, installation, testing and commissioning of joy stick as per Specification with connectivity complete as required.
1
-
-
... More
Supplying, installing, testing and commissioning of high speed Agitator of SS 304 and Flocculator complete with single phase motor for flash mixer.
1
-
-
... More
HYDRANTS, PIPING & ACCESSORIES
Providing, fixing, testing & commissioning of MS air cushion tank on top of riser fabricated from 6mm thick MS plate, 200 mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required and conforming to IS 4736-1968.
9
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 part 1 and M.S. top cover of required thickness for rolling shutters etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
M.S. tube.
12095.12
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
... More
32mm HDPE pipes (Finolex/Supreme make)
360
-
-
... More
White washing with lime to give an even shade complete in all respect as per the direction of the Engineer-in-charge.
-
-
-
... More
SDB-1- COMMON AREA
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 35 kA symmetrical at 415 volts.
Incoming
1 No.100 amps 4P, Ics= Icu 25 kA, Moulded Case Circuit Breaker with microprocessor based release unit with ROH having following protection:
• Overload (adjustable thermal)
• Short-circuit (fixed magnetic )
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs.
1 set of Phase indicating light shall be protected by 6A MCB.
Bus Bars
150 Amps TPN, 35 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
1 No.63 amps 4P, Ics= Icu 25 kA, Moulded Case Circuit Breaker with microprocessor based release unit with ROH having following protection;
• Overload (adjustable thermal)
• Short-circuit (fixed magnetic )
7 No. 25 amps DP Miniature Current Circuit Breaker Ics= Icu 10 kA following protection;
• Overload (Fixed thermal)
• Short-circuit (fixed magnetic )
-
-
-
... More
6th Floor
367.58
-
-
... More
EXTERNAL LIGHTING FEEDER PILLAR (IP 55)
Design, manufacture, supplying fixing in position of outdoor type feeder pillar, metal clade, suitable for 415 volt, 3-phase, 50 Hz with suitable foundation and arrangement for incoming/ outgoing cable termination, earthing, locking arrangement, insulated aluminium bus bars system, interconnection etc.
INCOMER
1 No. 100 amps 4P Ics= Icu 25 kA, Moulded Case Circuit Breaker with Thermal release unit with ROH.
1 No. 100 Amp, FP Contactor & A/M switch and Push Button, 24 Hrs TSQ Timer.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. Phase indicating light shall be protected by 6A MCB. - 1 Set
Bus Bars
1 Set of 150A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOING
3 No. 40 A, DP MCB, 10 KA
6 No. 6-32A, SP MCB, 10 KA
-
-
-
... More
65 mm dia pipe, 19 mm Insulation
50
-
-
... More
200 mm dia
1
-
-
... More
Providing and fixing of CP Brass 115mm long Shower Arm with wall flange and pressure adjustable Shower Rose complete with all accessories as required and making good the walls wherever required with flow rate of 6.0 LPM complying to Green Building requirements. Make : JAQUAR:OHS 2000 GB + SHA 483 or equivalent make OR Equivalent as per list of approved make)
120
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved qualit etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
Providing and fixing M.S holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc.
-
-
-
... More
Constructing masonry Chamber 60 x 60 x 75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chain lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.
-
-
-
... More
Outgoings
a. 25 Nos. suitable rating MPCB for suitable KW DOL starter and outgoing feeder to effluent pumps motor (including 1nos. standby). Each compartment shall contain auto / manual selector swtich and indicating / pushbutton lamps with MCB for ON / OFF / TRIP of motor.
b. 2 Nos. Suitable amps TPN MCB for suitable KW direct on line starter and outgoing feeders to sludge Pump and basket centrifuge. Compartment shall contain auto/manual selector switch and indicating lamps with MCB’s for ‘ON/OFF/TRIP’ status of motor
ii 50 amps TPN MCB’s 2 Nos.
d. Necessary cable alleys, internal wiring, and interlocking, earthing for all equipment shall also included
e. PLC along with HMI screen
Note:
All MCCB's to be suitable for motor duty and shall be of 25 KA breaking capacity.
-
-
-
... More
For CHW Pump, Cooling Tower Fan (10, 15 HP Each)
-
-
-
... More
65mm dia
14
-
-
... More
Providing and fixing of vitreous china white under counter circular wash basin with CP brass waste assembly, wall flanges and rubber adapters for waste connection complete..(Make:HindwareCatno.:10065 OR Equivalent as per list of approved make)
86
-
-
... More
Providing and fixing of Non IBR , Non Return Valve (on hot water line) having bronze body, SS working parts with screwed ends suitable for handling hot water.
-
-
-
... More
Supply of XLPE insulated and PVC sheathed copper conductor unarmoured cable of 1.1 KV grade confirming to IS : 7098:1988 with upto date amendments of following sizes
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :Make : (Hindware Cat no.:20044-Cistern.-61002 OR Equivalent as per list of approved make)
-
-
-
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. Make : JAQUAR:CON-107KN OR Equivalent as per list of approved make)
-
-
-
... More
Pot Strainer
Supply, installation, testing and commissioning of Pot - Strainer of the following sizes confirming to tender specification.
-
-
-
... More
E. I. WORK
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
3 core, 25 Sq.mm.
2
-
-
... More
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing with cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.
-
-
-
... More
Providing and fixing 75 mm SS 304 grade shielded coupling for Hubless centrifugally cast iron pipe.
1390
-
-
... More
100 mm dia
297
-
-
... More
PRESSURISATION PANEL-1
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
2 Nos. 125 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
1 No Fixed type Automatic transfer switch 125 Amp rating in open frame with live to live transfer time 200ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs for each incomer. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 125/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set for each incomer
Bus Bars
150 Amps TPN, 25 kA for 1 sec. Copper bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
13 Nos. 40A FP Miniature Circuit Breaker, 10 kA breaking capacity.
-
-
-
... More
4TH FL
2615.78
-
-
... More
15mm
22
-
-
... More
12,000 CFM, 1 x 5.5 Kw Fan Motor, 50 mm St. Pressure, Monoblock Pump
2
-
-
... More
Data socket outlet
564
-
-
... More
BUS BARS
600 Amps TPN, 50 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
200 Amps TPN, 50 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
-
-
-
... More
Ground Floor
22.49
-
-
... More
19 mm dia. (19 mm thick insulation)
170
-
-
... More
Earth work in oridinary soil
16090
-
-
... More
Terrace Floor
619.36
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Raj Nagar Plain white marble/ Udaipur green marble/ Zebra
black marble
-
-
-
... More
16,000 CFM, 75 mm St. Pr., 4 Row CC, 2 Row HC
2
-
-
... More
MAIN LT PANEL / CAPACITOR PANEL
Supply, Installation, Testing and Commissioning of Main LT Cum LT change Over Panel cubicle type, made out of 14 swg CRCA sheet steel, totally enclosed, IP 42, protection free standing, floor mounting, dust and vermin proof,indoor, compartmentalised, powder coated painting suitable for operation on 3 Phase and neutral, 415v, 50 Hz AC supply system with busbars extensible on both sides, interconnections with 2.5mm2 size of FRLS copper wire, control circuit with breaker control switch & auto/ manual selector switch, spring charging indication, ammeter, ammeter selector switches voltmeter, voltmeter selector switches, indicating lamps CT's, multifunction meters internally wired, interlocking and having following incomer & Bus coupler Air circuit breakers and outgoing Air circuit breaker/ Moulded case circuit breaker complete with releases for protection all as shown on drawing including supply & installation complete as required items and as per specifications (Panels shall be of TTA conforming to IEC 61439/1): All ACBs shall have Ics=Icw for 1.0 secs for all ACBs
-
-
-
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
20 mm nominal outer dia Pipes
3973
-
-
... More
With 20x20 mm square bar
550
-
-
... More
50 Pair
6
-
-
... More
Pre-laminated particle board with decorative lamination on both sides.
858.45
-
-
... More
Providing and fixing ball valve (Gunmetal) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
POWER PANEL - 2 (FIRST FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
1 No. 400 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 400/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set
Bus Bars
500 Amps TPN, 25 kA for 1 sec. Copper bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
5 Nos. 25A FP Miniature Circuit Breaker, 10 kA breaking capacity.
7 Nos. 40A FP Miniature Circuit Breaker, 10 kA breaking capacity.
11 Nos. 63A FP Miniature Circuit Breaker, 10 kA breaking capacity.
-
-
-
... More
Outgoing
3 No. 63 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with microprocessor based release unit with ROH having following protection;
• Overload (adjustable thermal)
• Short-circuit (fixed magnetic )
1 No.40 amps 4 Pole Miniature Circuit Breaker Ics= Icu 10kA,with microprocessor based release unit with ROH having following protection;
• Overload (fixed magnetic )
• Short-circuit (fixed magnetic )
1 No.32 amps DP Miniature Circuit Breaker Ics= Icu 10kA,with microprocessor based release unit with ROH having following protection;
• Overload (fixed magnetic )
• Short-circuit (fixed magnetic )
2 No.9-15 amps Motor Protection Circuit Breaker Ics= Icu 10kA,with microprocessor based release unit with ON,OFF & TRIP Indicator & with ROH having following protection;
• Overload (fixed magnetic )
• Short-circuit (fixed magnetic )
-
-
-
... More
Wall/Col (Includinf all Element floor wise)
-
-
-
... More
Dual core dual ratio 3 CTs 20/ 40/5A of 15VA burden and accuracy Class -0.5 for metering and class 5P10 for protection.
1
-
-
... More
5 x 3.14 x (0.15² - 0.10²)
0.8
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete as per Engineer-in-Charge.
263
-
-
... More
White sand stone - 30mm thick gang saw cut stone
494
-
-
... More
Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063.)
-
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
... More
Supply, Installation, Testing and Commissioning of Primary Pressure Operated Slave Control head complete kit with Pnuematically pressure, Flexible interconnecting hose complete with cylinder supervisory switch.
2
-
-
... More
Panic bar for S/L door
200
-
-
... More
Supply, Installation, Testing & Commissioning of 12 port splice tray etc. complete as per Tender specification., UL listed.
3
-
-
... More
Roof beam (Includinf all Element floor wise)
-
-
-
... More
Granite of any colour and shade
-
-
-
... More
Fixing rectified Glazed Ceramic floor tiles of size 300x300 mm in floor, treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
80 mm dia nominal bore
501
-
-
... More
100x10 mm
257
-
-
... More
300 - 500 CFM (3 mm Ex. St. Pr.)
6
-
-
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Supply and stacking of plant Beloperone species of height 30-45 cm. in poly bags of size 20 cm as per direction of the officer-in-charge.
70
-
-
... More
SOLAR WATER HEATING SYSTEM-FOR HOSPITAL BUILDING
Supplying, installing, testing and commissioning a Heat Transfer & Control (HTC) type packaged solar water heating system of 6000 Liters, 2.8 lakh Kcal/day system output and occupying 234 sqm (approx.) on roof, based on a closed circuit indirect Heat Transfer & Control system and capable of producing specified quantity of water at approx. 60 degree C during peak winters. It should be complete as per below mentioned parameters, technical specifications, tender drawing, all accessories, civil foundation work & should be as per Direction of Engineer-in-charge. Nothing extra in this regard will be paid to the contractor.
48 Nos. of Flat plate Solar collector panels of size 2000mm x 1000mm x 100mm (or as per manufacturer's standard) with extruded Aluminium frame, glazing 3.2 mm thick toughened & textured glass/4.0mm clear glass, back sheet of aluminium of 22SWG thickness, powder coated outer coating, 25mm rockwool/PUF insulation at sides & 50mm rockwool insulation at bottom of 48 kg/cum density & K value between 0.028 to 0.033 W/mK , laser /ultrasonic welded with necessary stands of size 32 x 32 x 3 mm thick (approx.) with powder coating, supports etc.
Absorber will be Cu-Cu (copper) type of 2sqm area & 25.4 mm dia.(approx.) & 0.71 mm thick(approx.) or header & 12.7 mm dia. (approx.) & 0.56 mm thick (approx.) for riser tube with nos. of riser tubes & absorber coating suitably selected. Coating Absorptivity should be 90% & Coating Emmissivity should be 20% with fins laser/ultrasonic welded with brass flanges & EPDM rubber gaskets.
Make up water tank of PVC construction of 200 liters capacity (approx.) to be provided with soft water provision & to refill at particular intervals.
Primary Horizontal centrifugal pumps (to be located at terrace level/or as per site conditions) -1 Set (1W+1S) of 10m head, 200 LPM of reqd. H.P & IE-2 class motor with brass impeller, SS-304 shaft & CI casing (or as per manufacturer's standards meeting our technical parameters).
Plate type Heat Exchangers of 70,000 Kcal/Hr Heat Transfer capacity (approx.) with Secondary 1 Set (1W+1S) heat transfer horizontal centrifugal pumps (to be located at terrace level/or as per site conditions) of 10m head, 200 LPM of reqd. H.P & IE-2 class motor with brass impeller, SS-304 shaft & CI casing (or as per manufacturer's standards meeting our technical parameters).
Pressure based Mixing Tanks of capacity 6000 lit with suitable capacity electrical back up, MOC is SS 316, of thickness min. 8 mm for shell & 10mm for Dishes, with 100 mm thick glasswool/rockwool insulation of K value between 0.028 to 0.033 W/mK & density 48 kg/cum with 24 SWG Aluminium cladding. Tank should withstand min. 5 kg/sqcm pressure.
Providing, fixing, jointing and testing in position solar Primary & Secondary System piping, as per required dia. of GI B Class pipes conforming to BIS Standards incl. fittings such as tees, crosses, plugs, elbows, reducers, unions, sleeve pieces etc. Cost shall be inclusive of Fixing/supporting the pipes (& fittings) at wall/floor level supported by MS clamps, supports etc, as per specification. All system piping to be insulated.
Providing and fixing Polyshield outer mechanical protection on nitrile rubber insulation of 19 mm thick, density 0.06 gm/cucm & U value 0.038 W/mK comprising of wrapping with poly glass tape helically wound and subsequently applying 2 coats of polyshield material (resin & hardener) over hot water piping at terrace as per manufacturer's specification and approved by Engineer-in-Charge.
1 No. Motor control panel needs to be provided for the entire system for Forced Circulation, Heat Transfer & Control (Primary & Secondary Circulation Pumps)
All necessary insulated interconnecting piping as detailed above, valves, temperature & pressure gauges, internal cabling from control panel to pumps, controllers, sensors, wires & other accessories is deemed to be included in this item & nothing extra in this regard will be paid to the Contractor.
Solar Heat Transfer & Control System as described above
-
-
-
... More
1000 mm length
1074
-
-
... More
c) 25 mm dia auto air vent valve
30
-
-
... More
12 core, 2.5 Sq.mm. Cu. Conductor cable
250
-
-
... More
Supply, installation, testing and commissioning of Vertical Inline condenser water centrifugal pump sets with bronze impeller for condenser water recirculation complete with TEFC (IE3) Sq. Cage induction motor with class "F" insulation, base plate, coupling guard, SS Shaft Grade 316, bronze impeller, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters.
-
-
-
... More
For 11,000 to 13,500 CFM AHU
4
-
-
... More
C.P. brass
230
-
-
... More
100 mm dia Ductile Iron Double Flanged
150
-
-
... More
Supply, Installation, Commissioning and Testing of A/V ALARM
19
-
-
... More
MEDICAL EQUIPMENT PANEL
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 35 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
2 Nos. 400 amps 4P, Ics= Icu 25 kA, Moulded Case Circuit Breaker with microprocessor based release with overcurrent and short circuit with ROH.
Metering & Indication for each incomer :
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 400/5 amps 10VA 1 set of ON/OFF indicating light shall be protected by 6A MCB.
-
-
-
... More
Laying of Above 95 sq. mm and upto 185 sq. mm XLPE power cable of 1.1 kV grade direct in ground
616
-
-
... More
Providing and fixing 75 mm single equal plain junction of required degree.
184
-
-
... More
1st Floor
1445
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
200
-
-
... More
40 mm dia nominal bore
35
-
-
... More
Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.
100
-
-
... More
Main UPS Outgoing Panel described as above
1
-
-
... More
3.5 core, 70 Sq.mm.
870
-
-
... More
40 mm dia
13
-
-
... More
Supply, installation, testing and commissioning of 900 litres capacity Buffer/ Over flow oil storage tank fabricated from 4 mm thick MS plates. Buffer/ Over flowTank shall include 450 mm ID manhole cover, level indicator and flanged connection for inlet, outlet, overflow drain and probe provision for level controller. Tank shall be mounted on 2 m high structure support with access ladder (painted with 2 coats of red oxide primer) and sump tank shall be provided blow the ground level treated with anticorrosive treatment..
2
-
-
... More
16 A SP MCB, SET-01
89
-
-
... More
60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern.
8228
-
-
... More
OUTGOING
Capacitors should be rated for 525V AC
3 No. 50 kVAR Super Heavy Dutyheavy duty type units with 14% detuned filter
3 No. 25 kVAR Super Heavy Dutyheavy duty type units with 14% detuned filter
2 No. 10 kVAR Super Heavy Dutyheavy duty type units with 14% detuned filter
1 No. 5 kVAR Super Heavy Dutyheavy duty type units with 14% detuned filter
3 No. Capacitor duty contactor 110A for 50 kVAR with over load relays.
3 No. Capacitor duty contactor 63A for 25 kVAR with over load relays.
3 No. Capacitor duty contactor 40A for 10 & 5 kVAR with over load relays.
3 No. 125 amps TP+N Ics= Icu 50 kA, Moulded Case Circuit Breaker with Thermal release unit and Earth fault protection with ROH.
3 No. 63 amps TP+N Ics= Icu 50 kA, Moulded Case Circuit Breaker with Thermal release unit and Earth fault protection with ROH.
3 No. 32 amps TP+N Ics= Icu 50 kA, Moulded Case Circuit Breaker with Thermal release unit and Earth fault protection with ROH.
-
-
-
... More
80 mm dia
1
-
-
... More
Making desiliting chamber in rectangular shape, finished size upto 1.5 m x 1.0 m x 3.5.0. Including the all civil work {earth work in all type of soil, providing and laying in position P.C.C & R.C.C, required centering and shuttering, reinforcement steel, erecting brick work in FPS bricks of class designation of cement mortar in 1 :6, laying 12 to 15 mm thick cement plaster of 1 : 2 : 4 (1 Cement : 2 Coarse sand : 4 fine Sand). as per drawing or as per direction of engineer - in- charge.
-
-
-
... More
6th Floor
706
-
-
... More
32 mm dia
130
-
-
... More
HSD storage tank as described above.
1
-
-
... More
Hot Water Generator For Winter Heating / Monsoon Reheat (For Hospital Building) Supply, installation, testing and commissioning of electrically operated Hot Water Generator of capacity 240 KW in multiple bank complete with PLC based microprocessor controls, electrical panels etc. confirming to technical specifications section. (1W+1S)
2
-
-
... More
Rectangular GI Ducting (Factory Made - L Shape)
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
-
-
-
... More
1.5 TR, 5 mm external static
1
-
-
... More
All requirements of Specifications, whether such requirements are mentioned in the item or not shall be met. The Specifications and Drawings where available, are to be read as complimentary to and part of the Bill of Quantities and any work called for in one shall be taken as required for all.
The contractor shall include for making all the opening in slabs, beams, walls etc. as required for his work. However, the contractor can coordinate with civil work to provide necessary sleeves. All hot and cold water supply pipes crossing masonry walls of toilets shall be provided with GI pipe sleeves. The annular space between the pipe and sleeve shall be filled up with glass wool in between and fire proof sealent on either end after testing. All openings shall be closed using water proofing compound or as specified by Project Manager.
The work shall be carried out in conformity with the plumbing drawings and within the requirements of architectural, HVAC, electrical structural and other specialized services drawings. The contractor shall cooperate with all trades and agencies working on the site. He shall make provision for hangers, sleeves, structural openings and other requirements well in advance to prevent hold up of progress of the construction schedule. All supports to the civil structure shall be provided with anchor fastners.
-
-
-
... More
150 mm dia
411.82
-
-
... More
22 G (751 to 1500 mm)
3370
-
-
... More
Providing and fixing Y/bucket strainer for oil supply line
-
-
-
... More
25 mm Dia
10
-
-
... More
11,000 CFM, 70 mm St. Pr., 6 Row CC, 2 Row HC.
1
-
-
... More
80mm dia (13 mm thickness)
742
-
-
... More
The cost shall be inclusive of providing salt for the testing and operation of system before handover to the owner.
1
-
-
... More
Supply, installation, testing and commissioning of 40 KVA prime continuous (actual) rating radiator cooled diesel generating set in acoustic enclosure along with PMG, base frame, Alternator, Static Excitation System, Lube Oil System, Electronic Governor (PC-1.1 or equivlent), Batteries, Battery Charger, Instrumentation, day oil fuel tank, Silencer with Bellows, Alarms, Engine Control Panel, AVM Pads, AVR Panel, Terminal Arrangements including cable termination box connected with suitable rating MCCB as Isolator in ms enclosure and all associated equipment / work as per specifications. Alternator shall have class H insulation and rated for 32 KW output at site ambient temprature. Engine shall not be derated upto 47 deg.C ambient.
1
-
-
... More
40 mm nominal bore
54
-
-
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
... More
2ND FL
125.24
-
-
... More
Providing and fixing electronic type level indicator for water tanks mounting in panel with the following features, level display, alarm when water level is low or high, full range from one level to four level display and manual reset for alarm etc. with electrical wiring conduit supports from wall & ceiling probs and all other accessories complete as required.MAKE:AUTO PUMP / EQUIVALENT
5
-
-
... More
5th Floor
367.58
-
-
... More
Profile B
Fixing with adjustable lugs with split end tail to each jamb
618
-
-
... More
Bath/Toilet Pull cord
Supply ,Installation ,Testing and commissioning of Pull cord type call button consisting of:
- Required length pull cord with ON & OFF facility and a luminous grip
- Moisture Protection
- Aniomicrobial coating
- VDE 0834/ UL 1069 certification
60
-
-
... More
4TH FL
83.57
-
-
... More
1st Floor
805.5
-
-
... More
40 mm dia
850
-
-
... More
Earthing Strip / Wires as per specs.
Supply & laying of 32 x 6 mm GI strip recess / surface as strip earth lead including soldering etc. as required.
70
-
-
... More
Supply Installation Testing Commissioning of GI 7.0 mtr octagonal Pole with 1200mm single arm Arm with inbuilt weather proof box including CC foundation (1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size) including excavation & refilling etc minimum size 350mm x350mmx500mm with 300mm x 300mm x10 mm Base plate including 4 Nos. heavy duty foundation nut bolts with suitable length as required and complete in all respect as per direction of Engineer in Charge
29
-
-
... More
Providing and fixing Heavy Class SS grating with Cockroach proof SS strainer of approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for waster and FT.
561
-
-
... More
(3000 CFM Supply Air Blower, 8 Row CC, 2 Row HC, 140 mm St. Pr. Backward Curved Supply Fan, 2500 CFM Forward Curved Ex. Air Blower, 60 mm St. Pr. with other accessories as specified above)
2
-
-
... More
3rd Floor
1276.28
-
-
... More
With 15 mm thick tegular edged light weight calciumsilicate false ceiling tiles.
6554
-
-
... More
Supply, installation, testing & commissioning of electronic type level controller for automatic operation of the system with high/low level alarm complete with auxillary NO/NC contacts for all the tanks and plant room sump.
1
-
-
... More
Supply, installation, testing and commissioning of Digital micro phone with zone key for remote location and interface with controller including communication cable and all accessories.
3
-
-
... More
Supply, Installation, Testing and Commissioning of conventional Heat Detector
8
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
BOREWELL (4NOS)
-
-
-
... More
32 mm nominal bore
12
-
-
... More
Primary point cntrld by SP MCB
166
-
-
... More
150 mm dia
10
-
-
... More
Provision shall be made for providing potential free contacts to all pumps starters for connection to building automation system.
1
-
-
... More
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
54mm OD X 1.2mm thk
180
-
-
... More
By DTH/Rotary Rig
4
-
-
... More
4th
5223.96
-
-
... More
Supply, installing, testing & commissioning of ultravoilet dis-infection unit. The unit shall have over 99.9 % bacterial reduction from inlet to outlet. The dis-infection chamber shall be constructed of SS 316L on all welted parts. The UV lamp shall be of low pressure mercury vapour type with hard glass enclosure, the sockets shall be water tight & vibration resistant. The lamp life shall be rated for 6000 hours. MAKE:ALPHA UV /EQUIVALENT
-
-
-
... More
Cost shall be inclusive of PVC flexible Hose pipe (for piping submeged in effluent) with GI (Heavy) piping (for piping non-submerged in effluent) Provision of guide ropes to guide submersible pump from upper level to operational level in sump basin with channels / angle section of MSEP shall be made by the STP contractor.
Air diffusion system shall include the following:
-
-
-
... More
Combined Electrical Control Panel for Compressed Air System and Vaccum System .
1
-
-
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
5119
-
-
... More
Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
80 mm dia nominal bore
501
-
-
... More
Providing and fixing 150 mm plain bend of required degree.
10
-
-
... More
4TH FL
2054
-
-
... More
50mm dia
19
-
-
... More
500 - 600 CFM (10mm static pressure, single phase)
5
-
-
... More
8 way, Double door
22
-
-
... More
Supply of MS hot dip galvanized puddle flanges in accordance to BS:10 table D as required to be provided (in the structural slab and wall) of various diameters. Puddle flanges shall be provided for all the structural component of the STP.
1
-
-
... More
8 way (4 + 24), Double door
88
-
-
... More
Extra for providing mechanical device chain and crank operation for operating rolling shutters etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
26 Patient Bed Elevator duplex mode with 2500 x3100 meter shaft, machine room consisting of ACVVVF Panel,4800mm over head,1800mm Pit including withiring, 1.0 MPS speed, 5 No. Stops , 30 m (Approx.) travilling distance, 1100 mm x2000 mm car size with 800x2100mm car entrance and door opening for stracture with Automatic with Centre opening ACVVVF Motor Door operator with electronic / infrared sensor door detector, all floor opening in same side ,moon rock finish stainless steel and PVC Flooring with complete all respect as per specification.
6
-
-
... More
35 mm thick shutters
-
-
-
... More
3RD FL
146.44
-
-
... More
With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
1979
-
-
... More
Nurse Call Module Nurse Call Module -Bed Side Unit with Handset module (with VOIP & SIP Functionality)
It shall have following features:-
- Nurse call with possibility for communications,
- Additional calls via service call key (optional) with possibility for communications,
- Integrated IP telephone end device (H.323 or SIP protocol stack)
- Controlling electronically driven shutters or other environmental applications,
- Automatic volume switching when using the PAT in the cradle,
- Plastic case and membrane keypad in fungicidal material,
- Splash resistant case, consisting of:
- Call button with nurse symbol with integrated fi nder and reassurance light on the top end of the unit,
- Loudspeaker, microphone, headphones socket,
- A fully-graphical display with a resolution of 128 x 64 pixels.
116
-
-
... More
Providing and fixing all instrumentation eg. Pressure guages, level controllers, sensors, rotametres for air, water etc. for making the system complete.
1
-
-
... More
Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general.
1st Extra lift of 1.5m (upto 7.5m) etc. complete as per direction of Engineer-in-Charge.
8083.7
-
-
... More
1:6 (1 cement : 6 fine sand)
-
-
-
... More
12,000 CFM, 25mm st. pr.
1
-
-
... More
Double Skin Mechanical Ventilation Unit
Supply, installation, testing and commissioning of factory fabricated Double Skin Mechanical Ventilation Unit floor mounted, fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple AMCA certified backward curved plug fan with aerofoil design blades, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, pre-filter section with non woven synthetic media MERV 6 filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated.
The MVU panels shall be insulated with 25 mm thick & 36 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete MVU shall conform to standard specication. The capacity of MVU shall be as follows.
-
-
-
... More
Supply, Installation, Fixing of Stored Pressure (ABC Dry Chemical Powder) type Fire Extinguisher of Capacity 6 kg Confirms to IS 15683, bearing ISI mark complete with brass forged squeeze grip type valve fitted with pressure gauge , pressurize with dry Nitrogen gas filled, with discharge nozzle with wall mounting bracket, having fire rating.(MAKE: OMEX/MINIMAX/NEWAGE)
-
-
-
... More
Excavation of required depth and back filling with compaction in soil for HSD fuel oil piping including ramming the earth and making good.
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
For 2,500 to 5,000 CFM AHU
4
-
-
... More
6th Floor
24.14
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineerin-Charge
:
-
-
-
... More
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
-
-
-
... More
Ground Floor
921.39
-
-
... More
25 mm nominal outer dia Pipes
2256
-
-
... More
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat etc. complete as per direction of Engineer-in-Charge.
27
-
-
... More
25 mm dia
100
-
-
... More
32mm nominal bore
3
-
-
... More
1 core, 50 Sq.mm
187
-
-
... More
Raft
2284
-
-
... More
150 mm wide x 50 mm x 1.6 mm
140
-
-
... More
OUTGOING
8 No. 630 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with microprocessor based release unit with ROH.
4 No. 500 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with microprocessor based release unit with ROH.
3 No. 400 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with microprocessor based release unit with ROH.
1 No. 200 amps TP+N Ics= Icu 25 kA, Moulded Case Circuit Breaker with Thermal release unit with ROH.
3 No. 160 amps TP+N Ics= Icu 25 kA, Moulded Case Circuit Breaker with Thermal release unit with ROH.
1 No. 100 amps TP+N Ics= Icu 25 kA, Moulded Case Circuit Breaker with Thermal release unit with ROH.
3 No. 63 amps TP+N Ics= Icu 25 kA, Moulded Case Circuit Breaker with Thermal release unit with ROH.
23 Set each outgoing Indication Lamps, LED type, for RYB with 2 Amp control MCB& breaker 'ON', 'OFF', 'TRIP' lamps with 2 Amp control MCB.
-
-
-
... More
Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).
-
-
-
... More
Fully Automatic Digital Gas Control Panel for Oxygen with inlet for Liquid Oxygen Tank as per NFPA 99, -
1
-
-
... More
HT AND LT CABLES
Laying of one number XLPE power cable of 33 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
-
-
-
... More
Area of slab upto 0.50 sqm
115
-
-
... More
H.P Tubing Flexible having antistatic Core as per ISO with Proper colour coded as per Technical Specification
60
-
-
... More
Providing and fixing insulated pressure reducing station for cold water supply comprising of 2 Nos Gun Metal ball valves on inlet & outlet & 1 no. globe valve for by-pass 1 No pressure reducing valve with flanged / screwed connection, 1 No. `Y' strainer, 2 Nos Pressure gauge on inlet & outlet, and 1 No. 15 mm dia safety valve. The complete system is tested to a pressure not less than 15 Kg/Sq.cm and suitable to reduce the pressure upto 2 Kg/Sq.cm) Including necessary pipe & fittings; i.e. flanges/ unions, nuts, bolts and washers complete as required.
-
-
-
... More
Supply,Installation,testing and Commissioningof following telephone teg block
-
-
-
... More
Wiring for light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Condenser Water Pumps Set (2W+1S)
3
-
-
... More
Supplying, installing, testing and commissioning of dosing system (for domestic water treatment plant) consisting of one HDPE tank of 200 litres capacity with a positive displacement diphragm dosing pump having variable flowrate of 0-6 lph. The motor shall be suitable for operation at 240 V / single phase/50 Hz. Supply. The pump shall be supplied complete with necessary polypropylene piping, valves, strainers, low level switch and injection fittings. The pump shall be speed & stroke control Asia LMI / equivalent make.MAKE;ASIA LMI /EQUIVALENT
-
-
-
... More
Fixed bar linear air register of following sizes
-
-
-
... More
32mm diameter pipe
739
-
-
... More
Cooridoor Indicator
20
-
-
... More
100 mm dia.
6877
-
-
... More
10,000 CFM (20mm st. pr, 800 mm Dia Axial Fan, 2.2 KW, 1450 RPM Fan Motor, Direct Driven)
6
-
-
... More
Supply, Installation, Testing & Commissioning of 2 MP Dome Camera , ONVIF profile S & G , UL,CE,FCC certified , Motorized varifocal 3mm to 9 mm ,1/2.8" CMOS sensor , Quad stream ,frame rate 25 FPS @ 3MP , 50 FPS @ 2 MP , 2 streams simultaneously at 1920 X 1080 p ,Shutter speed : 1 ~ 1/10000 sec , P-iris , Min illumination : Color 0.04 lux , B/W 0.002 lux , Auto ICR ,Two way audio support ,Video compression : H.264 , MJPEG ,120 dB WDR ,Auto white balance , SD Card support ,Support upto 20 user accounts , 1 X BNC analog output ,Digital Zoom ,Digital PTZ ,2D / 3D Noise reduction, Edge analytics : Abandoned Object, Intrusion Detection, Tampering, Wrong Direction, Loitering Detection, Object Counting, Stopped Vehicle, Object Removal , InbuiltIR LEDs , IR distance upto 40 mtrs , IP 66 weather proof , IK 10 Vandal proof ,POE . (Approved make - Axis / Impulse / Avigilon / Hickvision)
64
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/ 6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
177
-
-
... More
Providing & fixing unloading point consisting of 1 No. ‘Y’ strainer, with 1 No. Ball valves on inlet, outlet & by pass 1 No. drain valve, 1 No. 3 meter long flexible hose with necessary suitable connection for all oil tanker outlet complete as required.
-
-
-
... More
Mono block centrifugal Sludge Transfer Pumps Capacity : 10 M3/hr @ Discharge Head 20 M head (2 Nos. - One working & one stand by) From tube settler tank to Sludge Holding tank of STP
1
-
-
... More
1 core, 6 Sq.mm.(LV System earthing)
421
-
-
... More
63 A 6 pole isolator switch with sheet metal enclosure, rain protection etc. as required to suit the site condition.
3
-
-
... More
Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign mater;al etc. and lining out etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
Fly Ash brick masonry in cement mortar (1:4) in foundation and plinth using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
7,000 CFM, 1 x 3.7 Kw Fan Motor, 50 mm St. Pressure, Monoblock Pump
1
-
-
... More
Metering & Indication 1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs for each incomer.
1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 200/5 amps 10VA ON/OGG indicating light shall be protected by 6A MCB. - 1 Set for each incomer.
Bus Bars
300 Amps TPN, 25 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
2 Nos. 125 amps TP+N Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
9 Nos. 40A FP MCB, 10 KA breaking capacity.
-
-
-
... More
Rates includes the cost of providing and laying, Fixing a) 450 mm thick coarse sand b) 400 mm thick layer of Boulder of 50 mm to 100 mm in size, c) 400 mm thick layer of of boulder 50 to 200 mm in size. d) Heavy duty manhole cover of 5400 x 540 x 100 mm two number
e) fixing heavy duty pvc rungs @ 300 c/c
f) fixing 250 mm dia to 450 mm dia inlet & outlet points g) making required cutout of required size. (refer enclosed drawing)
2
-
-
... More
For 10 Patient Bed Rooms with 6 Washrooms and 1 corridoor
1
-
-
... More
Design, Manufacture, Supply and Installation of dpi system, a complete assembly of extruded cellular structure UV protected polycarbonate panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of minimum 12 mm thickness with panel width of 600 mm to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam with standing seam height of 10 - 15mm at both sides of the panel. Panels shall be of Softlite / Antiglare type to prevent glare. Panels shall be fixed on purlins with the Z - Type Stainless Steel Fastener/retention clips and connectors. Each fastener shall be min 1 mm thick of SS 304 Grade and secured to supporting frame/structure with min 3 numbers self-drilling screws so that the Pull-Out Load of Fastener exceeds 7000 N (7 KN) when tested as per ISO 6892:1998 and IS 1608: 2005. Snap-on connectors to interlock the panels shall have 2-4 teeth grip-lock locking mechanism to ensure maximum uplift capability. Polycarbonate panels also shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per sASTM G 155. The polycarbonate panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155.
-
-
-
... More
3 core, 6 Sq.mm.
32
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
143
-
-
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) MAKE:UNIK/EQUIVALENT
-
-
-
... More
5th Floor
70.46
-
-
... More
7,500 CFM, 50 mm St. Pr., 4 Row CC, 2 Row HC
3
-
-
... More
1st Floor
367.58
-
-
... More
25 mm dia
2315
-
-
... More
1st
3542
-
-
... More
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :
-
-
-
... More
4TH FL
281.4
-
-
... More
1250 Amp. TP VCB with earth switch.
1 No. 33kV/110Volts PT Class 0.5 accuracy and 200VA burden with 1 No. VA F (0-36 kV), digital type, and protection HRC fuse for HT metering upto 15kV on incomer.
1 No. 33kV/240Volts PT Class 0.5 accuracy and 200VA burden for incomming supply.
1 No. Microprocessor based numerical relay with O/L, E/F and highset S/C protection compatible.
Breaker control switch
240 V AC spring charging motor
Set of ON/OFF/TRIP indicating lamps.
Clear lamp for Trip Circuit healthy supply.
Aux. relays for Anti Pumping & indication.Trip Circuit spervision relay.
Master Trip Circuit Relay
Digital electronic Trivector meter with RS 485 port.
Dual core dual ratio 3 CTs 50/ 100/5A of 15VA burden and accuracy Class -0.5 for metering and class 5P10 for protection. BUSBAR
1500 Amp aluminium Bus Bar.
-
-
-
... More
AHU Mounted Coilotron UV System For Floor Mounted AHU
Supply, installation, testing and commissioning of AHU mountable self contained and factory assembled Coilotron UV System with UL 1995 ABQK listed and UL 2043 certified, UV lamp life shall not be less than 11000 hours. Coilotron shall be installed in all floor mounted AHUs as specified herein. All the component / parts shall comply with the specification given in the tender. AHU supplier and coilotron supplier shall co-ordinate with each other regarding the fixing of the same in the AHU.
-
-
-
... More
Supply, installation, testing and commissioning of PVC tube deck settling media to be installed in primary and secondary tube setller tank alongwith suitable sludge removal arrangement either by pumps or air lifting pumps.
1
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
40
-
-
... More
Supply of Diesel Engine driven fire pump suitable for automatic operation comprising of the following and conforming to BS 649/IS 10002 all amended upto date.
a. Horizontal end suction centrifugal pump, suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ A.C supply. The installation shall be complete with flexible coupling and coupling guard as required. Fire pump shall have CI casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and SS (304) Shaft with mechanical seal, capable for delivering 2280 LPM at outlet head of 80 mts to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or topmost hydrant / sprinkler. The installation shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side. (The pump should be tested for bench mark at factory and shall be gotten approved by the Local fire Authority).
Pump shall be capable of furnishing not less than 150% of rated capacity at a head of not less than 65% of the rated head. The shut off head shall not exceed 120% of rated head.
-
-
-
... More
Providing & Fixing of Armstrong Orcal Clip in metal ceiling System consisting of 300x1200mm clip in tiles of pre coated Aluminium in 0.7 mm thickness with bevel edge in white colour with standard perforation of 1.5mm dia. The back of the tile should have black acoustical fleece. The NRC should be 0.70 and suitable for Green Building application, with Recycled content of 50%. Installation: To comprise 3000mm long ‘C’ channels spaced at 1200mm centres securely fixed to the structural soffit by support clamp & approved hangers. The last hanger at the end of each C channel should not be greater than 600mm from the adjacent wall. Use a C-channel connector for splicing two pieces of C-channels. 4000mm Dp-12 Main carriers (spring tee bars) shall be spaced at 1200mm centres in a direction perpendicular to the C-channels and shall be secured at every intersection with C channel using a dp-12 hanger. Use Dp-12 connector to splice two pieces of Dp-12 main carriers. Tiles should be clipped in between two Dp-12 carriers (spring tee bars) from below.
Perimeter trims to be of Armstrong wall angles of white colour secured to walls at 450mm maximum centres. Cut tiles to be secured to the wall angles using a spring clamp
1464
-
-
... More
GI Heavy : Interconnecting pipe line after delivery header of pumps, Tank overflow pipe etc. Header of pump / filter
1
-
-
... More
80 mm dia
12
-
-
... More
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete as per direction of Engineer-in-Charge.
583
-
-
... More
6th Floor
139.14
-
-
... More
25 mm dia pipe, 13 mm Insulation
390
-
-
... More
Supplying and drawing 2 x 2.5 sq. mm copper sqmm of fire servible cable as required.
22625.8
-
-
... More
Supply, installation, testing and commissioning of Cubical type sectinalised floor standing switch board by CPRI apprved firms of 18 MVA fault capacity at 415 V complete with 4 strip, 100 A capacity Aluminium Bus - Bar Electrolytic grade E-91, cable alley, switchgears suitable for AC-23 duty & of following capacity & as per specification given in the tender.
-
-
-
... More
Solid handling size for this pump = 7-8 mm
1
-
-
... More
For CDW Pump (30 HP Each)
-
-
-
... More
1 x 3C x 2.5 Sq. mm Copper
650
-
-
... More
4th Floor
367.58
-
-
... More
Supply and stacking of Adansonia digitata (kalp vricksh) plantof ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge.
70
-
-
... More
32 mm dia
21
-
-
... More
Expansion Tank for Hot Water Circuit Supply, installation , testing and commissioning of expansion tank for chilled water circuit of size 1.0mt x 1.0mt x 1.0 mt made out of 5 mm MS sheet duly epoxy coated & insulated as per specifications duly duly aluminium cladded with 22 G aluminum sheet complte with float valve, over flow & make up connections.
1
-
-
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:
Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic
contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.
-
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
3.0 TR, 8 mm external static
1
-
-
... More
Supply and installation of PVC Sheet wall covering 1.5m wide, having a nominal total thickness of 1mm. The nominal thickness of the wear layer would be 1.25mm. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments and filler calendared to form a sheet. Colors shall be dispersed throughout the thickness of the wear layer. Wallflex shall conform to Group M of Wear Resistance as per EN 660-2, Fire resistance of group 2 as per AS/NZS3837, Residual indentation of ≤0.10mm as per EN433, curling after exposure to moisture ≤8mm as per EN434, Seam strength of mean≥240N/50mm as per EN684 etc. complete as per direction of Engineer-in-Charge.
1539
-
-
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : (for underground tanks & overhead tanks).
-
-
-
... More
Providing, fixing, testing & commissioning of vertical MSEP filter with adequate dirt holding capacity. Fabricated from MS sheet as per IS-2825 and manufacturer's specifications complete with intitial charge filter media including painting inside with two coats of non toxic epoxy and with one coat of zinc chromate two coats of synthetic enamel paint outside. Including concrete foudation with cement plaster complete as required. The filter shall also be provided with set of internals for raw water inlet and bottom collecting system. Complete with frontal piping (heavy) and butterfly valves designed on 1.50 m / sec velocity. MAKE:ION EXCHANGE /EQUIVALENT
Filter for Domestic Water services in plant room
Filteration Rate 20000L/Sqm/Hr
Working pressure 3.5 Kg/Sq.cm
-
-
-
... More
1ST FL
8668.92
-
-
... More
ACF for Domestic Water services.
Filteration Rate 14000L/Sqm/Hr
-
-
-
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights
and all levels etc. including
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
-
-
-
... More
Filter Feed Pumps - (1W+1S), having discharge : 2.0 LPS (each) at 30-35 meter head
1
-
-
... More
Mixer in Brine tank : 1 Nos in SS 304 propeller
1
-
-
... More
Supply, installation, testing and commissioning of tanker inlet connection complete with 200 mm dia GI (heavy) inlet piping, hose inlet connection, MS cabinet enclosure (epoxy painted after fabriction), pad locking arrangement, inlet flexible hose complete with all necessary arrangement.
1
-
-
... More
Providing and fixing standard firemans axe with heavy rubber handle.(MAKE: OMEX/MINIMAX/NEWAGE)
47
-
-
... More
Upto 35 sq. mm (clamped with 1mm thick saddle)
12550
-
-
... More
Earthing with GI earth plate 600mm x 600mm x 6.0mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal and salt) complete as required.
38
-
-
... More
2 Slot
40
-
-
... More
9,000 CFM, 70 mm St. Pr., 4 Row CC, 2 Row HC
4
-
-
... More
25 mm Nominal bore
2
-
-
... More
125 mm dia. (32 mm thick insulation)
90
-
-
... More
CONTROL CABLE END TERMINATION
Supplying and making end termination with double brass compression gland and Copper lugs for following size of PVC sheathed copper conducter armoured control cable of 1.1 kV grand as required.
-
-
-
... More
4TH FL
1191.31
-
-
... More
Supply and fixing rubber matting conforming to IS-15652-2006 complete etc. as required.
12
-
-
... More
Terrace Floor
-
-
-
... More
Providing and fixing 150 mm SS 304 grade shielded coupling for Hubless centrifugally cast iron pipe.
25
-
-
... More
28mm
27
-
-
... More
200 mm dia
2
-
-
... More
Providing & fixing non-perlocating, rubber reinforced lined fire hose pipe (as per IS : 636, Type A) of 63 mm dia and length as described below. The hose shall be rated for brust pressure of 35.7 Kg/sqcm. Hose shall be complete with ISI marked brass male & female coupling (IS:903) bound & rivetted to hose pipe with copper rivets & 1.5 mm copper wire..(MAKE: OMEX/MINIMAX/NEWAGE)
-
-
-
... More
Providing and fixing Butter fly valve with nitrile seat and stainless steel stem with lever operation and cast iron body in powder coated finish, suitable for test pressure of 10Kg/sq.mm) with flanges, gaskets and necessary pad locking arrangement complete required.
-
-
-
... More
Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete including cost of all labour,labour cess,T&P,sundries etc. as directed by the Engineer in charge.
1508
-
-
... More
700 - 1000 CFM (15mm static pressure, single phase)
18
-
-
... More
50mm dia (13 mm thickness)
144
-
-
... More
Solid handling size for this pump = 18-20 mm
1
-
-
... More
32 mm
348
-
-
... More
150 mm dia. (32 mm thick insulation)
120
-
-
... More
EXHAUST PIPE
Supply and fixing of following sizes of MS pipe as per IS 1239 for exhaust piping complete with bends,supports,flanges welding etc.for exhaust of DG Set including painting, supplying & wrapping 150 mm thick minral wool thick insulation of density 150 Kg per cubic meter on all sides of Exhaust pipe with chicken mesh wrapping and clading with 22 SWG aluminium sheet suitable for this installation complete as required including guide support, expansion joint, SS bellows wherever required and as per specification.
-
-
-
... More
Engine cranking relay.
Mains supply voltage sensing relay.
Vender shall provide suitable PLC for interlocking and Load management.
Vender shall provide 1000 VA UPS with 30Mint backup with dry type maintenance free battery. Vender shall provide 24 DC battery charger suitable for panel.
The control wiring shall be operate at 24V DC.
Motorised Potentiometer for speed / voltage control shall be procured from DG manufacturer only Energry meter shall be provided in all outgoing
-
-
-
... More
100 mm dia
10
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 No.6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
5
-
-
... More
25 mm nominal bore
3
-
-
... More
Providing and fixing 100 mm Stain less steel mortice latch and lock with six levers and a pair S.S. lever handles with necessary screws etc. complete (Best make of approved quality) etc. complete as per direction of Engineer-in-Charge.
578
-
-
... More
40 mm thick with 20 mm nominal size stone aggregate
1311
-
-
... More
Structural steel work riveted, bolted or welded in built up section trusses and framed work including cutting, hoisting, fixing in position and apllying a primer coat of approved steel primer etc. complete as per direction of Engineer-in-Charge.
3550
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
Providing & fixing heavy duty double flanged flexicon rubber expansion joint (suitable for system test pressure) of standard length as per manufacturers specs including rubber gaskets, flanges, nuts, bolts and washers complete as required.
-
-
-
... More
Supply, Installation, Testing and Commissioning of 33kV 400A 3-Ph Gang Switch (Rocking type Air Break Isolator) along with support insulators operating mechanism base channel down pipe terminal connector and other acesseries complete as per IS :9921 (Pt. I to IV)or its latest ammendment and TS Vol II.
1
-
-
... More
Head : 35 M.
1
-
-
... More
Half brick masonry with non modular fly ash bricks of class designation 10, conforming to IS : 12894, in super structure above plinth and upto floor V level work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Providing, jointing, testing & commissioning of following sizes of ERW heavy class MS pipes conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, washer including galvanised supporting / fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. GI pipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls / floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s / Consultants requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects. All hangers, clamps, brackets etc. shall be of galvanized iron and floor supports with vertical pipes unless specified otherwise and then supply of the same shall also be included for rates under this head. Cost shall be inclusive of providing roller / slide support, expansion loops and wooden brackets / blocks for insulated pipes.
-
-
-
... More
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs for each incomer.
1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 100/5 amps 10VA Phase indicating light shall be protected by 6A MCB. - 1 Set for each incomer.
Bus Bars
150 Amps TPN, 35 kA for 1 sec. Aluminiun bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
3 Nos. 63A FP RCBO, 300 mA.
3 Nos. 40A FP Miniature Circuit Breaker, 10 KA breaking capacity.
-
-
-
... More
Bed Head Panels (For Wards)
245
-
-
... More
UPS PANEL - 2 (THIRD FLOOR)
Design, manufacture, supplying fixing in position of the following front operated cubicle type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 kA symmetrical at 415 volts.
Incoming
2 Nos. 160 amps FP Moulded Case Circuit Breaker Ics= Icu 25 kA,with Thermal based release with ROH.
1 No Fixed type Automatic transfer switch 160 Amp rating in open frame with live to live transfer time 200ms. The ATS should have complete switching neutral with zero position having positive isolation and on load manual operation complying to IEC 60947-3 and IEC 60947-6-1. The control unit shall be integral part of the ATS.
Metering & Indication
1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP MCBs for each incomer. 1 No. Digital VAF Meter with necessary protection and port for BMS communication, 3 Nos. 160/5 amps 10VA ON/OFF indicating light shall be protected by 6A MCB. - 1 Set for each incomer
Bus Bars
200 Amps TPN, 25 kA for 1 sec. Copper bus bars with heat coloured shrinkable insulation sleeve. - 1 Set
Outgoing
1 Nos. 25A FP Miniature Circuit Breaker, 10 kA breaking capacity.
5 Nos. 40A FP Miniature Circuit Breaker, 10 kA breaking capacity.
4 Nos. 63A FP Miniature Circuit Breaker, 10 kA breaking capacity.
4 Nos. 63A DP Miniature Circuit Breaker, 10 kA breaking capacity.
-
-
-
... More
5th Floor
812.5
-
-
... More
Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be .paid for separately) complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Providing & fixing level controllers for water pumps to start/stop the pump at set level. Including wiring, cabling from pump to panel & all other accessories as required to operate the system automatically.MAKE:CIRRUS ENGINEERING / TECHTROL/ TECHNIKA.
8
-
-
... More
2 x 3C x 6 Sq. mm (Rate For Single Run)
780
-
-
... More
Providing and fixing forged brass ball valve with forged brass ball suitable for test pressure of not less than 15 kg / sq.cm of the following size (Cost shall be inclusive of providing necessary union / flange connection) (MAKE: AXIN/ZOLOTO/NVR)
-
-
-
... More
Providing and fixing 100 mm single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.
161
-
-
... More
63 amps
235
-
-
... More
25 amps
131
-
-
... More
4 core, 35 Sq.mm.
14
-
-
... More
HSD STORAGE AND SUPPLY SYSTEM
Supply, installation, testing & commissioning of HSD storage tank 30 KL capacity (6 mm thick shell & 8 mm thick dished shell) as per IS-10987 and approved for construction, shop drawings duly approved by “CCOE” suitable for under ground installation including the following: (Civil work and sand filling by other agency) Inlet and outlet connections
Vent pipe.
Dip pipe assembly with calibration chart 550 mm dia manhole with cover. Lifting lugs
MS ladder Providing Anti corrosive treatment.
Provision for level sensor (BMS) Earthing of HSD Tank
-
-
-
... More
Providing IP User license for SIP Phone.
20
-
-
... More
3rd Floor
940
-
-
... More
Slot linear air diffusers of following sizes:
-
-
-
... More
19 C x 2.5 Sq.mm.
12
-
-
... More
0-1.5 Mtr
16262
-
-
... More
25 mm dia
100
-
-
... More
PANEL FLUDING FOR DG Syn. PANEL,LT PANEL,EMERGENCY PANEL -
Supply, fixing, testing and commissioning of automatic Linear pneumatic Tube Detection based NOVEC 1230 System for Electrical Panels (Trace Tube Panel Protection System), consisting of the Mentioned components-
DG Syn. Panel- SIZE -4500 x 1600 x 2400 -1 set
-
-
-
... More
300mm dia RCC pipe
250
-
-
... More
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with SFRC cover and frame (heavy duty, HD20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
... More
The contractor shall submit detailed GA drawings, flow diagrams, equipment list, power load requirement.
The contractor must do and provide in detail, design, calculations of all elements of the plant, electrical and mechanical work to satisfy adequacy of design
Contractor shall ensure submission of GOOD FOR CONSTRUCTION' stage architectural, structural, construction, electrical, mechanical and piping drawing, detailed GA drawings (Plan & Section), P & I diagram, schematic diagram for main components and additional components such as inserts, puddle flanges, vent pipes etc. for approval.
-
-
-
... More
CIVIL WORK
Earth work in oridinary soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge.
-
-
-
... More
External trim for panic bars
200
-
-
... More
Supplying, installing, testing & commissioning of Chlorine dosing system comprising of Sintex Tank with inlet / outlet connection, piping & valves along with metering pump for dosing. Complete set as per requirement.
1
-
-
... More
250x10mm
195
-
-
... More
vi) R.C.C. Lintels
-
-
-
... More
In rows 5 cm apart in both directions.
7152
-
-
... More
NON - RETURN VALVE with dual plate of CI body SS plates
vulcanized NBR seal flanged end & PN 16 pressure rating as specified.
-
-
-
... More
Irrigation water transfer Pump
Location - STP Plant Room (1W+1SB)= 1set
Capacity : 4.0 LPS.
-
-
-
... More
The system shall be complete to ensure automatic quotation of pump in accordance to water level in respective tanks.
-
-
-
... More
6th Floor
11
-
-
... More
1st Floor
1174
-
-
... More
25 mm
20019
-
-
... More
Main Panel described as above
1
-
-
... More
7.0 LPS each
1
-
-
... More
250 mm dia
4
-
-
... More
Smoke Extraction Panel-1 described as above
1
-
-
... More
Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer--in-charge.
-
-
-
... More
50 mm dia nominal bore
40
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
6408
-
-
... More
Providing and fixing 150 mm single equal plain junction of required degree.
10
-
-
... More
CC(1:2:4)with 12mm chips for grouting upto 5 mtr.Depth in sanitary sealing.
-
-
-
... More
Ward Vacuum Unit should with Digital and color coded display type regulator having large, easy to read gauge providing unmatched gauge accuracy + 1% of full scale color coded range with analogue mechanism. The unit should have 3-Mode High feature and equipped with push to set technology with collection Jar of 1200 ml with bracket (for Critical Areas) as per Technical Specification .
34
-
-
... More
For Vent Fan Motor of 7.5 Kw
1
-
-
... More
1 core, 10 Sq.mm.(LV System earthing)
1029
-
-
... More
i) R.C.C. floor and roof slabs, landings, balconies, projecting sun shades and chajjas
-
-
-
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification etc. complete as per direction of Engineer-in-Charge.
72
-
-
... More
Supply, Testing & Commissioning, fixing of LED based Respons Indicator with flat cover plate as approved by consultant/Architect.
922
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
-
... More
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured) etc complete as per Engineer-in-Charge.
2010
-
-
... More
2ND FL
123.51
-
-
... More
Providing and fixing of C.P. brass Towel ring.Make : JAQUAR : ACN 1121N OR Equivalent as per list of approved make)
46
-
-
... More
4th Floor
949.28
-
-
... More
75 mm dia.
2082
-
-
... More
50mm diameter pipe
166
-
-
... More
Volume control GI Dampers to be provided in Supply & Exhaust air registers / terminals.
10
-
-
... More
Plastic Propeller Fans
Supply, installation, testing and commissioning of propeller exhaust fans of various capacities as given below suitable for 240 volts, 50 Hz, single phase AC supply complete with gravity louvers & speed regulator etc.
-
-
-
... More
Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. approved by Engineer-in-Charge.
484
-
-
... More
300 mm width x 50mm depth x 1.6 mm thickness.
25
-
-
... More
EXTERNAL LIGHTING FEEDER PILLAR (IP 55)_ described as above
1
-
-
... More
Chilled / Hot Water Piping With Nitrile Rubber Insulation
Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.
Note:-The Pipes of sizes 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
-
-
-
... More
5TH FL
226.38
-
-
... More
Well cap
4
-
-
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
... More
Supply & fixing MV danger notice plate of 200 mm x 150mm, made of mild steel sheet of at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required.
5
-
-
... More
150 mm dia
18
-
-
... More
Providing & fixing MS Class ‘C’ diesel engine exhaust pipe (including all fittings, clamps, steel support) of suitable dia for the engine. The pipe shall be provided with 12 mm thick supercera ceramic fibre rope
20
-
-
... More
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
462
-
-
... More
2nd Floor
851
-
-
... More
Power Panel - 1 (Ground Floor) described as above
1
-
-
... More
3 Core, 185 Sq.mm.
150
-
-
... More
Providing, fixing, testing & commissioning of U.L.listed/ FM approved corrugated SS-304 Braided flexible sprinkler pipe droplet for 12 kg/ sq. cm. working pressure with 1/2" BSP threaded outlet & 1" BSP threaded inlet with reducer nipple, snap, clamp, T-bar bracket etc. with necessary fitting complete as required.(MAKE: OMEX/MINIMAX/NEWAGE)
-
-
-
... More
Terrace Floor
5129.47
-
-
... More
Granite work.
285.38
-
-
... More
Providing & Fixing 3 mtr automatic boom barrier with wireless remote control as per manufacture specification and direction of engineer-in-charge.
4
-
-
... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
59
-
-
... More
c) 20 G (1501 to 2250 mm)
20
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
12413
-
-
... More
Providing & fixing level controller for day oil storage tanks including wiring, cabling, probes with all other accessories for automatic operation of fuel pumps complete as required.
3
-
-
... More
150 mm dia.
50
-
-
... More
Supply, installation, testing and commissioning of Hydraulic filter press of Suitable Capacity with CI frame, PP plates complete with filter cloth complete with Filter press feed pump (Screw Type) – 2 No. (1 working + 1 standby) with 1 No. standby stator, interconnecting piping and poly dosing system.
-
-
-
... More
Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m :
-
-
-
... More
4th Floor
1657
-
-
... More
Hedge Plant
450
-
-
... More
63 amps
74
-
-
... More
1ST FL
259.87
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
All kinds of soil
-
-
-
... More
Head - 20 M.
1
-
-
... More
150 mm dia
1
-
-
... More
Inside size 2.0m x 1.5m and 1.0m deep including two nos. 60x60 cm. C.I. Cover and frame (double seal weight of cover and frame not less than 75 kg)
1
-
-
... More
Door closer
238
-
-
... More
Valves & Strainer
Supply, installation, testing and commissioning of following valves in chilled / condenser water line as per specification given in the tender.
BUTTERFLY VALVE (MANUAL) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified.
-
-
-
... More
Supply, Installation, Testing and Commissioning of 1 Zone Fire Detection Panel with 1 Zone Gas Release Module with Battery back up
2
-
-
... More
Providing 40 cm thick Damp Proof Course with cement concrete (1:2:4) using 12.5 mm size black hard granite(4 graded stone), crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of wall including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
877.2
-
-
... More
Capacity of Each Pump LPM 3024
Pump Head (Mt) 27.5 Motor HP (Indicative) 30.0
Pump Efficiency (Min) 80%
Primary Chilled Water Pumps Set
Supply, installation, testing and commissioning of Vertical Inline chilled water centrifugal pump sets with bronze impeller for chilled water recirculation complete with TEFC (IE3) Sq. Cage induction motor with class "F" insulation, base plate, coupling guard, SS Shaft Grade 316, bronze impeller, factory fitted mechanical seal, flexible pipe connector at inlet and outlet etc. conforming to technical specification & as per following parameters. The chilled water pumps shall also include the cost of thermal insulation.
-
-
-
... More
GI (C class) for all other water piping.
1
-
-
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
450
-
-
... More
Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
28mm OD X 1 mm thk
2200
-
-
... More
Amber for Trip indication.
Red `ON' Green `OFF'
Spring charge indication.
Auto trip indication.
1 No. hooter with hooter acceptance and reset push button.
1 No. master trip relay. ( Electromechanical Type ) 1 No.Trip ckt supervision relay. (Electromechanical Type ) 600A color coded heat shrinkable sleeved TP Copper busbar of 350 MVA fault rating.
1 Set of fuses, ferrules, wiring etc. as required.
1 Set of Power Pack 220 Volt A.C. / 24 Volt D.C. complete as required. Note: All spare contacts of breaker or any other equipment inside the breaker shall be wired upto the outgoing terminal strip with appropriate ferrules / coding. The terminal strip rating shall be suitable for connecting two wires of 2.5sqmm subjected to providing minimum size strip suitable for 4/6sqmm.
-
-
-
... More
Providing and fixing G.I. EXTENSION PIECE for 100 mm dia floor trap formed out of main pipe (Type A) with multiple side inlets, suitable for various dia pipes, side connections, including all fixtures and fittings as per site conditions and as per standard details and water tight sealing of joints and area surrounding the grating and as directed.
456
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
440
-
-
... More
GF
323
-
-
... More
Supply, Testing & Commissioning, fixing of Analog addressable Photo electric smoke detector with mounting based LED, address switch to programme the detectors complete as required.
1636
-
-
... More
12mm OD X 1 mm thk
1400
-
-
... More
25 mm dia. (19 mm thick insulation)
400
-
-
... More
150 mm
150
-
-
... More
For 4 bar
90
-
-
... More
Providing and fixing of CP Braided hoses connection 450 mm long including nuts and washers complete as required. (Make : JAQUAR:ALD-803AB OR Equivalent as per list of approved make)
671
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.MAKE:ATUL/ MODI GUARD / ASAHI.
96
-
-
... More
4TH FL
284
-
-
... More
Supply, installation, testing & commissioning of 2 Nos Stainless Steel Perforated, Corrugated Bar Screen with suitable lifting arrangement (size 750 mm wide x 600 mm high approx) - Domestic Effluent
2
-
-
... More
5TH FL
364.31
-
-
... More
Head - 60 M.
1
-
-
... More
50 Litres (trolley mounted)
5
-
-
... More
300mm dia SW/RCC pipe
150
-
-
... More
Kitchen Panel described as above
1
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
15
-
-
... More
Fire Dampers & Actuator
Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.
-
-
-
... More
MOC: PP/PVC, .
Supplying, installing, testing & commissioning of all piping (as described below) and isolation control valves for making the system complete.
-
-
-
... More
EFFLUENT TREATMENT PLANT : 20 KLD CAPACITY
Preliminary Works
All items of work under this Contract shall be executed strictly to fulfill the requirements laid down under “Basis of Design” in the specifications. Type of equipment, material specification, methods of installation and testing and type of control shall be in accordance with the specifications, approved shop drawings and the relevant Indian Standards, however capacity of each component and their quantities shall be such as to fulfill the below mentioned requirements.
The unit rate for all equipment or materials shall include cost in INDIAN RUPEES (INR) for all materials, fixing materials, accessories, appliances tools, plants, equipment, transport, labour and incidentals required in preparation for and in the full and entire execution as per Specifications and Drawings including all taxes and duties and also including forwarding, freight, insurance and transport into Contractor’s store at site, storage, installation, testing, balancing, commissioning and other works required or called for in item.
In the event of conflict between Bill of Quantities and other documents including the Specifications, the most stringent shall apply. The interpretation of the Architect / Consultant /Project Manager shall be final and binding.
All requirements of Specifications, whether such requirements are mentioned in the item or not shall be met. The Specifications and Drawings where available, are to be read as complimentary to and part of the Bill of Quantities and any work called for in one shall be taken as required for all.
-
-
-
... More
65 mm dia nominal bore
265
-
-
... More
50 mm dia
10
-
-
... More
Condenser Water Piping
Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends, tees etc..but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect.
Note:-The Pipes size 150 mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
-
-
-
... More
Providing, fixing, testing andcommissioning of precharged air vessel (size 450 mm dia & 2000 mm height) for pressurization of hydrant / sprinkler system complete with adequate pressure switches (as per design / requirement) with valves to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, 25 mm dia inlet with isolating valve duly painted from inside and outside complete as required.
2
-
-
... More
25 mm dia. (19 mm thick insulation)
210
-
-
... More
Two coats
1451
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters etc complete as per Engineer-in-Charge.
-
-
-
... More
Plinth beam
373.13
-
-
... More
4TH FL
6410.64
-
-
... More
INCOMING/OUTGOING PANEL 630 A Vacuum circuit breaker of (1000 MVA) 26.3 KA RMS for 3 second ruputuring capacity for at 33 KV rated, totally enclosed,air insulated metal clad housing, floor mounting, horizontal isolation, vermin proof, fully interlocked horizontal drawout type having isolation features and control devices complete with the following.
3 No. Single Phase double core current transformer 60/5 Amp epoxy cast insulated class of insulation E.
Core 1-15VA burden class 1.0 for metering.
Core 2-15VA burden class 5P10 for protection.
P.T's of 33KV/1.732, 110V/1.732, 100VA with suitable rating H.T. & L.T. fuse conforming to relevant IS Standards and complete as required. One no. numerical microprocessor based three phase over current (IDMT element) (2 O/C+1E/F) with earth fault relay with instantaneous elements. 1 No. Anti Pumping device.
1 No. Circuit breaker control switch for electrical (T/N/C).
1 No. limit switch for test & service position.
1 No. Voltmeter (0-36KV) with selector switch. (96mm square)
1 No. Ammeter (0-150Amp) with selector switch. (96mm square).
1 No. electronic type digital energy analyser having 30 days memory and parameters of KW, KWH, Power factor, frequency etc. Suitable for BMS compatible with all accessories. 1 Set of following indicating lamps.
Red, Yellow & Blue for phase indication.
-
-
-
... More
Providing and fixing of Nickel Chromium Plated towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour, of approved brand & manufacture complete as per direction of Engineer in Charge. Make : JAQUAR:ACN 1111NM OR Equivalent as per list of approved make)
-
-
-
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
-
-
-
... More
Supply, Installation, Testing and Commissioning of 'Wire Braided Flexible Rubber Hose with Elbow and connectors complete assembly to Connect Novec 1230 Cylinder Assembly Discharge outlet with Discharge Pipe or Discharge Manifold.
8
-
-
... More
300 mm width X 40 mm depth X 1.6 mm thickness Raceways
308
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin- Charge.
-
-
-
... More
Supply of Recessed Mounted 2'X2' Panel LED comprising of 25W LED with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 100 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job.
747
-
-
... More
76mm
1
-
-
... More
Fixing of Kota tiles of minium thickness 25mm thick of premium grade of size above 0.10 Sqm. in Dado over 12mm thick bed of cement mortar 1:3 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour,labour cess with T&P complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
INCOMER :-
3 No.ACB, 800 Amps, 50 kA, 4 Pole, Microprocessor release Motor wound spring charged closing mechanism (EDO), horizontal Drawout type with all protection i/c Earth fault, reverse On-screen display of measurements, Current : phase/neutral/earth, average, max, % loading, seq components, Voltage : Phase, Line, Average.
Each Incomer shall have one set of the following items:
Intelligent multi function digital meter with Capability of Disturbance Direction Detection, Sag & Swell Monitoring with Waveform Capturing, Class of accuracy: 0.2S as per IEC62053-22, Sampling Rate of 256 Samples/Cycle, Harmonics analysis upto 63rd order for Voltage & Current, RS485 PORT & Dual Ethernet PORT
1 Set of Indication Lamps, LED type, R,Y,B with 2 Amp control MCB and breaker 'ON', 'OFF', 'TRIP' & spring charged lamps.
Breaker failure protection.
-
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
58
-
-
... More
Condensate Drain Piping With Nitrile Rubber Insulation
Supply, installation, testing and commissioning of condensate drain water piping of GI 'Medium' class complete with fittings like elbows, tees, reducers, bends, MS flanges, supports, welding, painting etc. as required conforming to tender specifications and of following sizes. Complete pipe shall be duly insulated with Closed Cell Elastomeric Nitrile Rubber of specified pipe section of specified thickness in the tender specification & suitable for indoor / outdoor application. Complete pipe insulation shall also have 200 g/m² factory laminated, treated woven Glass Cloth coating for mechanical and UV protection.
-
-
-
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
20
-
-
... More
100 mm wide x 50 mm x 1.6 mm
210
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements