Rural Development Department Tender

RCC of design mix of M-25grade having specified characteristics compressive strength/ target mean strength of 200kg./cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing & tests conducted in accordance with relevant clauses of IS 456/IS 516 using crusher broken hard granite course aggregate of 12 mm. to 20mm. sizes & proportion of approved quality, obtained from approved quarry & using minimum quantity of cement confirming to codal provision including hoisting, lowering & laying concrete in layers not exceeding 15cm thick compacting with vibrators watering & curing for 28 days including water tight centering and shuttering and finishing the exposed surface smooth with plastering with cement mortar of same proportion as of concrete if necessary providing grooves or beads wherever necessary including cost, conveyance, royalties and taxes of all materials and labour T&P required for the work etc complete in all respect but excluding cost of M.S or T.S rod and binding wires and labour charges for bending and tying as directed by the Engineer-in-charge.

Column Base

Column & Beam

Plinth band /Grade Beam

Lintel Bend

Chajja

RCC Roof Slab

Flyash . Brick masonary in cement mortar (1:6) using the bricks of size (25cm X 12cm X 8cm) of crushing strength not less than 75 Kg/cm2 with dimensional tolerance plus minus 8% after immersing the bricks for six hours in water before use in foundation and plinth and basement and for ornamental flower beds plinth moulding and similar such type of works with all necessary projections, circular moulding, corbelling, champering, watering and curing etc including lowering placing in position, shoring, shuttering, dewatering if necessary and cost, conveyance, royalties and taxes of all materials and cost of all labour and T&P required for the work etc complete as per the direction of the Engineer - in - charge.

Flyash . Brick masonary in cement mortar (1:6) using the bricks of size (25cm X 12cm X 8cm) of crushing strength not less than 75 Kg/cm2 with dimensional tolerance plus minus 8% after immersing the bricks for six hours in water before use in superstructure including hoisting placing in position, scaffloding splays cutting, circular moulding, corbelling, champering and similar such type of works watering and curing etc including cost, conveyance, royalties and taxes of all materials and cost of all labour and T&P required for the work etc complete as per the direction of the Engineer - in - charge.

Part-A (Ground floor)

Providing M.S/TS Reinforcement for Cutting, straightening, coiled or bent up M.S/T.S rod (HYSD Fe 415) bending, binding, welding and jointing if necessary and tying the grills and placing in proper position as required for R.C.C work including hoisting, lowering and laying, cost, conveyance and taxes of M.S/T.S rod and binding wires of 18 to 20 gauge required for the work for binding and tying the grills including all cost, conveyance, taxes of materials and labour and T&P required for the work etc complete as per the direction of the Engineer - in - charge.

Part-A (Ground floor)

20mm thick cement plaster (1:4) in finished smooth over roof slab after cleaning the surface including watering, curing complete with cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc complete as directed by the Engineer-in-charge.

Cement concrete of proportion (1:3:6) with hard granite hand broken metal of approved quality of 40mm size from approved quarry including hoisting and laying concrete, watering and curing, centering, shuttering and finished the exposed surface, smooth including all cost, conveyance, royalties, taxes of materials and labour T&P required for the work etc complete as per the direction of the Engineer - in - charge.

Cement concrece (1:2:4) with 12 mm size.c.b/h.b. hard granite chips for P.C.C. works including & laying including cost, carringe & royalty and all taxes of all materials and cost of all labour with T & P required for the work complete as per the direction of the Engineer - in - charge.

12mm thick cement plaster (1:6) in finished smooth to surface of brick walls after raking out joints including watering and curing with cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc complete as directed by the Engineer-in-charge.

16mm thick cement plaster (1:6) in finished smooth surface brick walls after raking out joints including watering, curing complete with cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc complete as directed by the Engineer-in-charge.

Cement washing one coats with approved paint including all cost, conveyance, royalties, taxes of materials and labour T&P required for the work etc complete as per the direction of the Engineer - in - charge.

Cement primer one coats with approved primer including all cost, conveyance, royalties, taxes of materials and labour T&P required for the work etc complete as per the direction of the Engineer - in - charge.

Painting two coats with approved weather coat with approved shade including all cost, conveyance, royalties, taxes of materials and labour T&P required for the work etc complete as per the direction of the Engineer - in - charge.

Finishing wall surface of walls with Acrylic wall putty (water based) of approved make including cost of all labour , materials etc complete

Distempering two coats with approved shade including all cost, conveyance, royalties, taxes of materials and labour T&P required for the work etc complete as per the direction of the Engineer - in - charge.

Fixing chequered tiles in floors on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles etc complete as per the direction of the Engineer-in-charge.

Fixing vetrified tiles in floors of size 600mm x 600mm on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles etc complete as per the direction of the Engineer-in-charge.

Fixing vetrified tiles in Dados on 12 mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles etc complete as per the direction of the Engineer-in-charge.

Fixing marble tiles in floors on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles etc complete as per the direction of the Engineer-in-charge.

Fixing marble tiles in Dados on 12 mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles etc complete as per the direction of the Engineer-in-charge.

Fixing Ceramic tiles in Dados on 12 mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles etc complete as per the direction of the Engineer-in-charge.

iron work for steel & door & window grills

Labour for fitting, fixing door and windows T&P required for the work etc complete as per the direction of the Engineer-in-charge.

Paintig two coats with approved paints to door and window over a coat of primer including all cost, conveyance, royalties, taxes of materials and labour T&P required for the work etc complete as per the direction of the Engineer - in - charge.(for Iron works)

Providing & fixing to wall ,ceilling and floor with PVC pipe Class-IV( Conforming to IS 4985) and pipe fitting with clamps including making good to the wall , ,ceilling and floor all complete as per specification .

Conveying from stacks and spreading moorum on the road surface in a unifrom thickness & dressing with H.R.R etc. complete