Rural Development Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 46,222Document Cost
₹ 6,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CERWI_101405_1Bid Award Id
ViewTender No
NAYAGARH13202324Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Masonry work using Flyash Bricks of size 250mm X 125mm X 80mm having crushing strength not less than 75 kgs/ cm2 in cement mortar (1:6) in Foundation & Plinth with portland slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per specification & direction of the Engineer-in-charge. (Ground Floor)
19.53
100380
5139.81
... More
R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. i) Column Base
17.22
119202
6922.35
... More
R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. ii) Plinth Beam
7.42
57459
7743.88
... More
R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. iii) Column (Ground Floor)
3.98
66823
16789.85
... More
R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. iii) Column 1st Floor
4.73
89080
18833.08
... More
R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. iv) Lintel (Ground Floor)
3.4
47535
13981.17
... More
R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. iv) Lintel 1st Floor
2.71
41905
15463.33
... More
R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. v) Chajja (Ground Floor)
16.88
19777
1171.66
... More
R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. v) Chajja 1st Floor
17.25
22780
1320.58
... More
R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. vi) Beam (Ground Floor)
7.42
124580
16789.85
... More
R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. vi) Beam 1st Floor
7.09
133530
18833.68
... More
R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. vii) Stair Case (Ground Floor)
1.41
20720
14695.08
... More
R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. vii) Stair Case 1st Floor
1.46
23827
16320.01
... More
R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. viii) Roof slab (Ground Floor)
11.79
157271
13339.38
... More
R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. viii) Roof slab 1st Floor
12.61
186458
14786.57
... More
Cutting, straightening coiled or bent up M.S. rods, HYSD steel or Tor Steel of grade Fe-500-D confirming to I.S.-1786 - 1985 welding or jointing if necessary, bending, binding, tying the grills as required for RCC works, and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading of M.S. rods, HYSD steel or Tor steel and binding wires of 18 to 20 gauge required for the work including cost of all materials, labour charges, sundries, T&P etc. and scaffolding complete in all respect as per specification and direction of the Engineer-in-Charge (payment will be made according to the actual weight of M.S. rod or HYSD steel or Tor steel & binding work consumed in the work) (Ground Floor)
57.21
511713
8944.47
... More
Cutting, straightening coiled or bent up M.S. rods, HYSD steel or Tor Steel of grade Fe-500-D confirming to I.S.-1786 - 1985 welding or jointing if necessary, bending, binding, tying the grills as required for RCC works, and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading of M.S. rods, HYSD steel or Tor steel and binding wires of 18 to 20 gauge required for the work including cost of all materials, labour charges, sundries, T&P etc. and scaffolding complete in all respect as per specification and direction of the Engineer-in-Charge (payment will be made according to the actual weight of M.S. rod or HYSD steel or Tor steel & binding work consumed in the work) 1st Floor
34.79
312085
8970.56
... More
Masonry work using Flyash Bricks of size 250mm X 125mm X 80mm having crushing strength not less than 75 kgs/ cm2 in cement mortar (1:6) in Super Strcutre with portland slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per specification & direction of the Engineer-in-charge. (Ground Floor)
46.79
242285
5178.14
... More
Masonry work using Flyash Bricks of size 250mm X 125mm X 80mm having crushing strength not less than 75 kgs/ cm2 in cement mortar (1:6) in Super Strcutre with portland slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per specification & direction of the Engineer-in-charge. 1st Floor
37.95
207628
5471.1
... More
16 mm. thick cement plaster in c.m.(1:6) to inside surface in all floors at all height with approved grade of cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties of all materials with additional charges as decieded by the District Administration,DMF & EMF @15% on royality amount, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete with providing grooves as per specification and direction of the Engineer in charge. (Ground Floor)
273.54
63160
230.9
... More
16 mm. thick cement plaster in c.m.(1:6) to inside surface in all floors at all height with approved grade of cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties of all materials with additional charges as decieded by the District Administration,DMF & EMF @15% on royality amount, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete with providing grooves as per specification and direction of the Engineer in charge. 1st Floor
214.76
50745
236.29
... More
12 mm. thick cement plaster in c.m.(1:6) to outside surface in all floors at all height with approved grade of cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties of all materials with additional charges as decieded by the District Administration,DMF & EMF @15% on royality amount, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete with providing grooves as per specification and direction of the Engineer in charge. Ground Floor
163.54
26670
163.08
... More
12 mm. thick cement plaster in c.m.(1:6) to outside surface in all floors at all height with approved grade of cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties of all materials with additional charges as decieded by the District Administration,DMF & EMF @15% on royality amount, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete with providing grooves as per specification and direction of the Engineer in charge. 1st Floor
116.5
19703
169.13
... More
Providing 06mm thick cement mortar(1:4) to RCC surface finished smooth including closed deep chiping and slury treatment including watering, curring with cost,conveyance, roylity of all materials with additional charges as decieded by the District Administration,DMF & EMF @15% on royality amount, labour charges, T&P etc. required for the work complete in all respect as per specification and direction of Engineer-in-charge. (Ground Floor)
99.84
17731
177.6
... More
Providing 06mm thick cement mortar(1:4) to RCC surface finished smooth including closed deep chiping and slury treatment including watering, curring with cost,conveyance, roylity of all materials with additional charges as decieded by the District Administration,DMF & EMF @15% on royality amount, labour charges, T&P etc. required for the work complete in all respect as per specification and direction of Engineer-in-charge. 1st Floor
93.61
17022
181.84
... More
Priming one coat using water bound cement primer in all floors and heights to wall surface to receive weather coat painting/ Distempering of approved make and shade including cost of scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the specification and direction of the Engineer-in-charge. (Ground Floor)
536.92
35876
66.82
... More
Priming one coat using water bound cement primer in all floors and heights to wall surface to receive weather coat painting/ Distempering of approved make and shade including cost of scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the specification and direction of the Engineer-in-charge. 1st Floor
424.87
29519
69.48
... More
Finishing walls with two coats of weather coat paint over priming surface (outside) of approved shade to outside surface with cost, conveyance, of all materials, labour charges, T&P etc.required for the work complete as per specification and direction of the Engineer-in-charge. (Ground Floor)
163.54
13449
82.24
... More
Finishing walls with two coats of weather coat paint over priming surface (outside) of approved shade to outside surface with cost, conveyance, of all materials, labour charges, T&P etc.required for the work complete as per specification and direction of the Engineer-in-charge. 1st Floor
116.5
9915
85.11
... More
Wall painting two coats with Plastic Emulsion paint over priming surface (inside) including sand papering, polishing the surface with cost, conveyance of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. (Ground Floor)
373.38
33275
89.12
... More
Wall painting two coats with Plastic Emulsion paint over priming surface (inside) including sand papering, polishing the surface with cost, conveyance of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. 1st Floor
308.37
28012
90.84
... More
Providing and laying in floors Non-skid matt finish vertrified step tiles of 12-15mm thick full body bull nose edges of approved made & colour like somany Kajaria or Johanson laid on 20mm thick cement mortar (1:1) including grouting the joints with white cement and matching pigment and washing with oxalic acid etc.complete including cost, conveyance of precast vertified tiles & other materials with all labour T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. (Ground Floor)
16.91
19696
1164.78
... More
Providing and laying in floors Non-skid matt finish vertrified step tiles of 12-15mm thick full body bull nose edges of approved made & colour like somany Kajaria or Johanson laid on 20mm thick cement mortar (1:1) including grouting the joints with white cement and matching pigment and washing with oxalic acid etc.complete including cost, conveyance of precast vertified tiles & other materials with all labour T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. 1st Floor
13.62
16010
1175.48
... More
Supplying, fitting and fixing of vertified tiles in floors of size 600mm x 600mm coloured/printed series (Homogenous) of approved make with application of polymer modified cement based water resistant adhesive bed of requied thickness of 10mm and filling joints with epoxy grout of approved quality including cost, conveyance of precast vertified tiles & other materials with all labour T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. (Ground Floor)
90.76
105715
1164.78
... More
Supplying, fitting and fixing of vertified tiles in floors of size 600mm x 600mm coloured/printed series (Homogenous) of approved make with application of polymer modified cement based water resistant adhesive bed of requied thickness of 10mm and filling joints with epoxy grout of approved quality including cost, conveyance of precast vertified tiles & other materials with all labour T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. 1st Floor
66.55
78228
1175.48
... More
Providing and fixing of Ceremic wall tiles in Dadoes skirting and risers of steps on 6mm thick of size 300X200mm of cement mortar (1:3) jointed with neat cement slury, mixed with pigment to match the shades of the tiles including rubbing and polishing with cost, conveyance of precast tiles, labour charges, T&P etc.required for the work complete in all respect as per specification and direction of the Engineer-in-charge. (Ground Floor)
14.84
13878
935.19
... More
Providing and fixing of Ceremic Wall tiles in Dadoes skirting and risers of steps on 6mm thick of size 300X200mm of cement mortar (1:3) jointed with neat cement slury, mixed with pigment to match the shades of the tiles including rubbing and polishing with cost, conveyance of precast tiles, labour charges, T&P etc.required for the work complete in all respect as per specification and direction of the Engineer-in-charge. 1st Floor
14.66
13946
951.3
... More
Providing, fitting and fixing of Vertified Tiles in dados skirting and risers of step on 12mm thick with cement mortar (1:3) jointed with neat cement slury, mixed with pigment to match the shades of the tiles including rubbing and polishing with cost, conveyance of precast tiles, labour charges, T&P etc.required for the work complete in all respect as per specification and direction of the Engineer-in-charge. (Ground Floor)
10.87
13171
1211.76
... More
Providing, fitting and fixing of Vertified Tile in dados skirting and risers of step on 12mm thick with cement mortar (1:3) jointed with neat cement slury, mixed with pigment to match the shades of the tiles including rubbing and polishing with cost, conveyance of precast tiles, labour charges, T&P etc.required for the work complete in all respect as per specification and direction of the Engineer-in-charge. 1st Floor
9.04
11099
1227.86
... More
Providing and laying of cement concrete of prop. (1:2:4) using 12mm size black hard granite crusher broken chips including watering, curing and ramming, centering and shuttering with cost, conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge. Ground Floor
3.55
26865
7567.84
... More
Supplying, fitting & fixing of M.S.grills / M.S.shutters/ M.S angle choukath / M.S.Plate shutter / M.S.Grill gate in proper position including making holes in walls or RCC structures and window grills with cost, conveyance of all materials, labour charges,T&P etc. required for the work complete as per the specification and direction of Engineer-in-charge. (Ground Floor)
1380.35
110428
80
... More
Supplying, fitting & fixing of M.S.grills / M.S.shutters/ M.S angle choukath / M.S.Plate shutter / M.S.Grill gate in proper position including making holes in walls or RCC structures and window grills with cost, conveyance of all materials, labour charges,T&P etc. required for the work complete as per the specification and direction of Engineer-in-charge. 1st Floor
1022.5
81800
80
... More
Providing fitting and fixing of Aluminium Door with OEL anodized section of 9202 as vertical member,9201 as top member and 9200 as Bottom & middle member and 6 mm plain glass in top portion with 12mm thick pre laminated borad in bottom portion fixed on door frame by means of OLE Section No.4660 as tapered clip and the frame to be completed bymeans of jointing angle No.1855 including cost, conveyance, royalty and taxes of all materials,hire charges of drilling machine and cost of all labour T&P required for the work complete in all respect as per direciton of the Engineer-in-charge.(Ground Floor)
2.28
16448
7214.22
... More
Providing fitting and fixing of Aluminium Door with OEL anodized section of 9202 as vertical member,9201 as top member and 9200 as Bottom & middle member and 6 mm plain glass in top portion with 12mm thick pre laminated borad in bottom portion fixed on door frame by means of OLE Section No.4660 as tapered clip and the frame to be completed bymeans of jointing angle No.1855 including cost, conveyance, royalty and taxes of all materials,hire charges of drilling machine and cost of all labour T&P required for the work complete in all respect as per direciton of the Engineer-in-charge. 1st Floor
2.28
16448
7214.22
... More
Supplying , fitting,fixing up window (sliding type) made up aluminium section 151-154, 151-155, as windows frame section No.151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement with all fittings, cost conveyance of all materials, taxes, labour charges, T&P etc. required for the work complete as per specification & direction of the Engineer-in-charge. (Ground Floor)
1.11
7445
6707.79
... More
Supplying , fitting,fixing up window (sliding type) made up aluminium section 151-154, 151-155, as windows frame section No.151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement with all fittings, cost conveyance of all materials, taxes, labour charges, T&P etc. required for the work complete as per specification & direction of the Engineer-in-charge. 1st Floor
1.11
7445
6707.79
... More
Priming one coat with any approved primer to receive Enamel painting over iron/wooden doors and windows,grills, Grill Gate etc. with sand papering, polishing the surface with cost, conveyance of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. (Ground Floor)
80.47
4917
61.11
... More
Priming one coat with any approved primer to receive Enamel painting over iron/wooden doors and windows,grills, Grill Gate etc. with sand papering, polishing the surface with cost, conveyance of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. 1st Floor
80.47
5046
62.71
... More
Painting two coats with Synthetic Enamel paint over iron/wooden doors and windows,grills, Grill Gate etc. with sand papering, polishing the surface with cost, conveyance of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. (Ground Floor)
80.47
12219
151.85
... More
Painting two coats with Synthetic Enamel paint over iron/wooden doors and windows,grills, Grill Gate etc. with sand papering, polishing the surface with cost, conveyance of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. 1st Floor
80.47
12525
155.66
... More
Providing 20mm thick grading plaster in cement mortar(1:4) over roof slab including watering, curring & ramming with cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount, cost of labour, T&P, etc. required for the work complete as per specification & direction of the Engineer-in-charge.Ground Floor
113.98
29454
258.42
... More
Supplying, fitting and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, of all materials, labour charges, T & P etc. required for the work complete in all respect as per specification and direction of the Engineer-in-charge. (Ground Floor)
6.1
22603
3705.56
... More
Supplying, fitting and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, of all materials, labour charges, T & P etc. required for the work complete in all respect as per specification and direction of the Engineer-in-charge. 1st Floor
6.1
22603
3705.56
... More
E.I. works Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) Group A
23
10855
471.98
... More
E.I. works -do-Group B
21
14995
714.06
... More
E.I. works -do- Group C
10
10187
1018.74
... More
E.I. works Recessed wiring to Fan Point in. -do- Group B
10
7140
714.06
... More
E.I. works Recessed wiring to Call Bell Point in -do- Group C
3
3056
1018.74
... More
E.I. works Recessed wiring to Exhaust Fan Point in -do- Group C
7
7131
1018.74
... More
E.I. works S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.
10
2624
262.43
... More
E.I. works S/F of Angle holder replacing Ceilling Rose
28
495
17.7
... More
E.I. works S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board
28
6375
227.69
... More
E.I. works S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.
13
10177
782.87
... More
E.I. works S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required
5
3257
651.54
... More
E.I. works S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC
3
3921
1307.1
... More
E.I. works S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover.
4
5448
1362.15
... More
E.I. works S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection
2
2014
1007.2
... More
E.I. works S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.2 Modular box with base & cover
20
4430
221.54
... More
E.I. works 4 Modular box with base & cover
3
806
268.83
... More
E.I. works 6 Modular box with base & cover
4
1309
327.49
... More
E.I. works 8 Modular box with base & cover
2
738
369.43
... More
E.I. works 12 Modular box with base & cover
8
3856
482.08
... More
E.I. works Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.0 (1.8)
88
11698
132.94
... More
E.I. works 2x2.5+1x1.5 (1.8.2)
247
36533
147.91
... More
E.I. works 2x4+1x1.5 (1.8.3)
120
19834
165.29
... More
E.I. works Inverter wiring (1x1.5smm) Copper wire (1.19.1)
111
5464
49.23
... More
E.I. works S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)
18
2404
133.6
... More
E.I. works Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of MCB 12 way Double door (2.3.7)
2
3822
1911.25
... More
E.I. works Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )
2
4714
2357.16
... More
E.I. works Supply & laying 8 SWG Cu wire in recess for loop earthing as required (3.18)
15
1453
96.87
... More
E.I. works S/F of Cu .Earth Plate Earthing 600 mm x600mmx3.15mm with Salt & Charcoal for Earth electrode (3:5)+(3.6)
2
11321
5660.74
... More
E.I. works Supply, Installation, Testing & Commissioning of exhaust fan upto 450 mm sweep in the exising opening, including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (1.43)
7
22712
3244.68
... More
E.I. works S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)
3
372
124.27
... More
E.I. works S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL
19
13174
693.41
... More
E.I. works Supply of 1200mm BLDC A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Energia-32/Polycab-Affeciente Neo/Crompton-Energion /Havels-Efficiencia DX/Orient-Ecotech Supreme/Anchor-Eco Breeze urban )
10
45772
4577.21
... More
E.I. works S/F step type modular fan regulator
10
2848
284.81
... More
E.I. works Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval type including necessary connections. ( M-5 )
3
1818
606.05
... More
E.I. works Supply & Fixing of 45-48 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells)
3
17187
5729.04
... More
PH Works Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. Initial lift upto 1.5 mtr
6.89
1571
228.21
... More
PH Works Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. From 1.5 mtr to 3.0 mtr depth
2.3
562
244.97
... More
PH Works Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.
0.69
695
1010.3
... More
PH Works Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
0.46
2663
5802.7
... More
PH Works Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
0.5
4056
8097.6
... More
PH Works Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
3.19
17198
5396.3
... More
PH Works Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
8.55
1600
187.2
... More
PH Works Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
8.55
299
35
... More
PH Works Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
1.78
1201
676.9
... More
PH Works Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
0.22
1987
9036.2
... More
PH Works Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
0.25
2024
8097.6
... More
PH Works Supplying all materials, labour, T&P and making M.S. Step Iron in 20mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.
5
1349
269.8
... More
PH Works Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.
0.45
446
992.1
... More
PH Works Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.
2
1709
854.6
... More
PH Works Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
12.65
2037
161.1
... More
PH Works Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.
2.2
281
128.05
... More
PH Works Supplying all materials, labour, T&P and fixing Ceramic tiles in floors, treads abd kabdubg ib 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. GROUND FLOOR
8.24
10042
1218.8
... More
PH Works Supplying all materials, labour, T&P and fixing Ceramic tiles in floors, treads abd kabdubg ib 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. 1ST FLOOR
5.75
7142
1242.1
... More
PH Works Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dado skirting on 12mm thick CP 1:3 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. GROUND FLOOR
33.99
43524
1280.5
... More
PH Works Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dado skirting on 12mm thick CP 1:3 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. 1ST FLOOR
23.64
31062
1314
... More
PH Works Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins.
7.19
22872
3181.1
... More
PH Works Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame.
24.75
13654
551.7
... More
PH Works Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in cm (1:4) for taking GI / PVC pipes and making good the damages etc all complete as per P.H specification and direction of the E.I.C. a) 250mm to 375mm thick wall
15
3040
202.7
... More
PH Works Cutting Grooves in wall or floor
25
5090
203.6
... More
PH Works Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C (PARRYWARE, CERA, HINDWARE)
5
9590
1918
... More
PH Works Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C. 580mmx440mm size White Orissa pan
2
7087
3543.7
... More
PH Works European water closet with ‘P’trap plain with White Plastic PVC Seat Cover
3
11143
3714.5
... More
PH Works Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C. 610x510x200 mm stainless steel kitchen sink
2
11943
5971.7
... More
PH Works Supplying all materials, labour T&P and fixing wash basins with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C. a).550mmx400mm W.H.basin (PARRYWARE, CERA, HINDWARE)
4
13029
3257.4
... More
PH Works Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C. (PLAZZ / Parryware / HINDWARE)
A) 15mm dia CP Bib Cock (long Body)
9
8815
979.5
... More
PH Works 15mm dia CP Bib Cock (Sort Body)
5
4527
905.4
... More
PH Works 15mm dia CP Angle Stop Cock
11
10144
922.2
... More
PH Works 15 mm dia CP Pillar Cock
4
4597
1149.4
... More
PH Works 15mm dia CP concealed stop cock
6
6651
1108.6
... More
PH Works a) Fixing of 20mmx450mm long CP towel rail
5
5074
1014.8
... More
PH Works CP towel ring
4
2187
546.8
... More
PH Works fixing CP soap holder
8
2556
319.6
... More
PH Works Fixing of Glass Mirror 600mmx450mm size B.E mirror (fixed type)
4
3294
823.7
... More
PH Works 25mm dia U-PVC Ball Valve[Metal Ball]
3
2383
794.4
... More
PH Works 32mm dia U-PVC Ball Valve[Metal Ball]
1
1636
1636.2
... More
PH Works 15mm dia CP flange
15
781
52.07
... More
PH Works 15 mm C.P Extension piece 50 mm long
15
1149
76.6
... More
PH Works 15mm x 225mm long size CP shower arm
4
2240
560
... More
PH Works Supplying all materials, labour, T&P and fitting and fixing U-PVC soil waste ventilating pipes of and fittings of the following outside diameter of 4kg/cm2 conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. a) 110mm dia PVC SWR pipe
35
13405
383
... More
PH Works 110mm dia Plain bend
4
703
175.9
... More
PH Works 110mm U-PVC door bend
4
1004
251.1
... More
PH Works 110mm U-PVC door Tee
4
1414
353.6
... More
PH Works 110mm dia cowl
4
339
84.9
... More
PH Works 125mm dia CP grating
9
777
86.4
... More
PH Works 110mm dia PVC P trap
5
1905
381.1
... More
PH Works 110mm dia PVC SWR offset
3
1433
477.7
... More
PH Works 110mm PVC SWR S/Jn with door
2
707
353.6
... More
PH Works 75mm dia PVC pipe
10
2309
230.9
... More
PH Works 75mm PVC SWR plain bend
4
420
105.1
... More
PH Works 75mm PVC SWR DOOR bend
2
288
144
... More
PH Works Supplying all materials, labour, T&P and providing and fixing to wall or ceilling and floor PVC pipes conforming to (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing etc all complete as per P.H specification and direction of the E.I.C. a) 20mm dia C-PVC pipe (Internal)
40
11144
278.6
... More
PH Works 25mm dia PVC(ASTM) pipe(External)
45
4752
105.6
... More
PH Works 32mm dia PVC(ASTM) pipe(External)
10
1389
138.9
... More
PH Works Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C. Laying of 100 mm dia S.W Pipe line Haunch top
12
15919
1326.6
... More
PH Works Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:1.5:3) mix using 12 mm size H.G chips, foundation concrete (1:3:6) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C. (a).Inside size 250mmx250mm
4
8384
2096.2
... More
PH Works Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C Inside size 760mm x 760mm x 460mm
3
29411
9803.8
... More
PH Works Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. Construction of Soak way Pit (1.00 m dia x 2.00m Deep)
1
14851
14851.4
... More
PH Works Construction of Soak way RING Pit (1.2 m dia x 2.00m Deep)
3
24481
8160.5
... More
PH Works Supplying all materials, labour, T&P and Fitting and Fixing of PVC water storage tank including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.Land placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 Ltr capacity PVC tank (ISI mark Sintex make)
1
13612
13612.3
... More
PH Works Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m & roof slab of 1.40mx1.40m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 Ltr capacit ON ground FLOOR
1
15684
15684.5
... More
PH Works SINKING OF TW Labour for drilling a perfectly vertical bore hole at specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination rigs as required to suit the site condition as per the direction of the Engineer-in-charge including use of own rigs with its accessories, tools and plants and consumables etc for lowering of 200 mm dia P.V.C/G.I/MS pipes for housing fitted socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/P.V.C/M.S casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tubewell) Drilling of 125mm X 100mmdia bore-
75
50692
675.9
... More
PH Works Lowering of the following size G.I/P.V.C pipes with or without slotted pipes as per the necessary from ground level upto 30 mtrs depth and fitted and fixed up in perfectly vertical position including cutting and threading pipes and slotted pipe and supplying and fixing all jointing materials, tools and plants complete and keeping the top of the casing pipe threaded including plugging tubewell to prevent entry of foreign materials from above. a) Lowering of 125mm dia PVC pipe (Labour)
33
4026
122
... More
PH Works Cost of 125mm dia PVC pipe (Sch-80-ISI mark)
33.5
36705
1095.68
... More
PH Works Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge is obtained from the tubewell including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge.
1
3661
3661.3
... More
PH Works Installation of pump set
Supply of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 1800-2200 ltr/hour and a head of 45-60 Mtr of reputed make like KSB/TEXMO and equivlant including all cost conveyance and taxes etc all complete as per the direction of E.I.C.
1
15849
15849.15
... More
PH Works Supplying all labour, T&P and fitting abnd fixing of 1.00 HP single phase vertical submersible pump set with commissioning and testing etc all complete as per the direction of E.I.C.
1
1475
1475
... More
PH Works Supplying all labour, T&P and fitting abnd fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00 HP single phase submersible pump including all cost, conveyance of all taxes etc all complete as per the direction of E.I.C.
1
2809
2809.32
... More
PH Works Supplying all labour, T&P and fitting abnd fixing of three core flat cable (1.5 mm2) of ISI mark of reputed make like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc all complete as per as per the direction of E.I.C.
55
3943
71.7
... More
PH Works Supplying all labour, T&P and fitting abnd fixing of plastic rope MS well cover, MS clamp, stainless steel short piece, bend and socket including all cost, taxes etc all complete as per as per the direction of E.I.C.
1
1660
1660
... More
PH Works Supplying all labour, T&P and fitting abnd fixing of HDPE pipe and fitting with making connection to pump set including all cost, taxes etc all complete as per as per the direction of E.I.C. A) 32mm dia HDPE pipe
40
5280
132
... More
PH Works BORE PROTECTION Supplying all materials, labour, T&P for construction of bore protection wall with providing sand filling, cement concrete (1:4:8) with HG metal & KB brick work in cement mortar (1:6) of 1.15 height, 16mm thick CP over the brick work, RCC slab of size 0.95 x 0.95 x 0.75 mtr avairage length in C 1:1.5:3, centering shutering including watering curing conveyance of all materials to work site with all cost, taxes etc all complete as per as per the direction of E.I.C.
1
6654
6654.45
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements