Rural Development Department Tender

Providing cement concrete 1:2:4 with 12 mm nominal size of hand or crusher broken hand granite stone aggregate of approved quality from approved quarry in foundation up to a depth of 1.5m.below ground level and up to a height of 1.5m above Ground level or Bed level including hoisting, lowering and laying in position in layers not exceeding 150 mm thick with proper packing and ramming to proper slope and level including curing dewatering, shoring, shuttering if necessary at the time of laying concrete with cost,conveyance, royalty,taxes of all materials required for the work, including supplying and working of pumps and all other materials required for the work, including all labour finishing the exposed surface, smooth, providfing grooves and beads where ever necessary etc. complete as per spoecification for Road and Bridge works and direction of Engineer-in-charge.

Fly Ash Brick masonary brick size of 25x12x8cm having crushing srength not less than 75kg per cm2 with dimension tolerance 8percent in C.M. 1:6 in foundation and plinth including cost, conveyance, royalty and taxes of all materials, labour etc. complete including watering and curing for required period as per specification and direction of the Engineer-In-charge.

Fly Ash Brick masonary brick size of 25x12x8 c.m having crushing srength not less than 75kg per cm2 with dimension tolerance 8percent in C.M.1:6 in Superstructure including cost, conveyance, royalty and taxes of all materials, labour etc. complete including watering and curing for required period as per specification and direction of the Engineer-In-charge.

Providing, Fitting and Fixing GI square pipe 3-6mm wall thickness using in frame work Including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.

Providing, fitting, fixing of GCI sheet Tata Shakti Blue in roof including drilling hole in wind ties, fixing of ridges wind ties etc. complete as per direction of the Engineer-in-Charge

Dismantling and removing mable chipps flooring including stacking of the materials for reuse and removing the debris within 50 meter lead.as per specification and direction of the Engineer-In-charge. .

12mm thick cement plaster 1:6 finished smooth to outside surface of brick wall after racking out the joints scraping and cleaning the surface including watering and curing for specified period etc. complete including all cost and conveyance, royalty, taxes of all materials etc.complete as per specification and direction of the Engineer-In-charge.

16mm thick cement plaster 1:6 finished smooth to inside surface of brick wall after racking out the joints scraping and cleaning the surface including watering and curing for specified period etc. complete including all cost and conveyance, royalty, taxes of all materials etc.complete as per specification and direction of the Engineer-In-charge.

6mm thick Cement plaster 1:4 to R.C.C.surface finished smooth including closed deep chipping and slurry treatment curing etc. complete as per specification and direction of the Engineer-In-charge.

Fixing vetrified tiles in floors,treads or steps and landing on 25 mm thick bed of c.m. 1:1 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing completeas per direction of EIC.

Fixing vetrified tile in dados skirting and risers of steps on 12mm thick CP 1:3 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of EIC.

Finishing walls with weather coat two coats over a coat of cement primer to outer wall surface including cost and conveyance of all materials to site, and all labour charges complete as per direction of the Engineer-in-charge.

First floor

Distempering 2-coat to walls with distemper of approved shade on old or new work to give on even shade including cost and conveyance of all materials to site, and all labour charges complete as per direction of the Engineer-in-charge.

Providing, Fitting and Fixing M.S. Iron angle and shutters for doors and windows Including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.

Painting two coats over wood and iron work with approved Enamel paint over a coat of primming, including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.