Rural Development Department Tender

Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface etc with all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge

Providing and applying tack coat with bitumen emulsion (RS-I) on prepared surface etc with all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge

WBM Surface

BT Surface

Providing & laying SDBC with batch mix hot mix plant using crushed aggregate of specified grading, premixed with bituminous binder of 60/70 penetration grade, transporting the hot mix to work site, laying with a hydrostatic paver finisher wit censor control to the required grade, level, alignment, rolling with smooth wheeled, vibratory & tandem rollers to achieve the desired compaction as per clause 508 of MoSRT&H specification for road and bridge works (4th revision) etc complete with 1% Cess and as per directio & Specication of the Engineer-in-Charge.

White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per MORD techincal specification Clause 1915 with all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge.

Providing and fixing of R.C.C(1:2:4) pre cast Kilometer stones of different size with all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge

Ordinary K.M stones

Painting of KM Stone

Lettering of KM Stone

200m stone (Precast)

Reinforced cement concrete M15 grade Guard stone/local stone of standard design as per IRC:25 fixed position including finishing and lettering but excluding painting as per drawing and Technical specification Clause 1704 of MORD. etc complete with 1% Cess and as per directio & Specication of the Engineer-in-Charge.

New Guard posts on curve portion

Providing and fixing of retro-reflectorised, cautionary, mandatory and informatory sign as per IRC-67 -2012made of Class-B retro-reflective sheeting high intensity and high intensityPrismatic grade retro-reflective sheeting as perASTM D 4956 Type-III and IV strictly Conforming to clause 6.7 of IRC 67-2012 and vide clause 801.3, fixed over aluminium sheeting, 2.00 mm thick as per Clause 6.5.2 of IRC 67-2012 or A.C.P. (Aluminium composite panel) used for sign boards with a thermoplastic core of low density polyethylene (LDPE) between two thick sheets of aluminium with over all thickness of 4 mm and aluminum thickness of 0.5mm on both sides supported on mild steel angle post 75mm x 75mm x 6mm 2 nos and 3 nos horizontal and 1 no vertical extra supporting member of MS angel of size 50 mmx50 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 cm x 45 cm x 75 cm, 60 cm below ground level as per approved drawing including cost, conveyance, royality, taxes of all materials, labour, T & P, excavation, curing etc. complete, under supervision of Engineer-in-Charge.

900 mm  eqilateral Triangle Board

Village Board (600 mm x 450 mm) Rectangle

600 mm  dia Cautionary Board

Road marking with hot applied thermoplastic compound with reflectorising glass beads on bituminous surface. etc complete with 1% Cess and as per directio & Specication of the Engineer-in-Charge.

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing etc complete with 1% Cess and as per directio & Specication of the Engineer-in-Charge.