Rural Development Department Tender

Brick work with Fly Ash Bricks 25 cm x 12 cm x 8 cm size having crushing strength not less than 75 Kg/Cm2 with dimensional tolerance +/- 8 percent in cement mortar (1:6) in Foundation & Plinth etc. complete as per specification and direction of the Engineer-in-Charge.

Brick work with Fly Ash Bricks 25 cm x 12 cm x 8 cm size having crushing strength not less than 75 Kg/Cm2 with dimensional tolerance +/- 8 percent in cement mortar (1:6) in Superstructure etc. complete as per specification and direction of the Engineer-in-Charge.

Cement concrete (1:2:4) using 12mm hard granite crusher broken metal including all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in - charge.

Providing and laying RCC M-20 grade using 20 mm and downgraded size hard black broken granite stone chips of approved quality and from approved quarry including hoisting, lowering and laying concerete and compacting by using vibrators watering and curring for 4 weeks centering and shuttering and finishing the exposed surface smooth providing grooves of beads where necessary including cost, conveyance, royalities and taxes of all material and labour required for the work etc. complete excluding cost and conveyance of M.S. Rod or steel and binding wires of 18 to 20 guage and labour charges for straightening, cutting etc of the M.S. rods or tor steel and tying grills and placing in proper position as per specification and direction of the Engineer-in-charge. work with minimum compressivee strength in work test of 150kg/cm2 in 15cm cum cubes at 28 days cost and conveyance of M.S. Rod or steel and binding wires of 18 to 20 guage and labour charges for straightening, cutting etc of the M.S. rods or tor steel and tying grills and placing in proper position as per specification and direction of the Engineer-in-charge.

Column base & footing

Plinth Band

Column & Beam

Lintel Beam

Chajja

Roof Slab

Straightening bent up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and tying the grills hoisting lowering and placing in proper position as required for RCC works with cost, conveyance and taxes of M.S. Rods or Tor steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge. (Weight of binding wires will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only).

Providing 20 mm thick grading plaster in C.M.(1:4) over roof slab after chipping and chiselling the same and cleaning the surface by wire brushing laid to proper slope finished smooth including watering and curing with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

Dressed seasoned sal-wood work framed and fixed (wrougth and put up) in trusses , purlins, frames of doors, windows, ventilator and beams.

Labour for fitting and fixing of M.S. windows and door shutters and collapsible gate with top and bottom rails in proper position including making holes in walls in proper position including making holes in walls RCC structure and wood work etc. and making good to the damages to walls or RCC structures including mending, or cutting to sizes or grooves in walls and fixing with RCC (1:2:4) with hard black broken granite stone chips of 12mm to 20mm (1/2" to 3/4") (20mm not to exceed 25% ) with cost, conveyane, royalty and taxes of all materials, labour, T & P articles requried for the work etc complete as per specification and direction of the Engineer-in-Charge.

Supplying, fitting & fixing of WPC type door for toilet with laminate as per specification including cost of all materials and labour charges.

Supplying fitting and fixing of two track UPVC sliding window of approved make with 6 mm thick glass of approved quality complete with frame , shutters and all fittings and fixtures T&P etc. as per specification and as per direction of the Engineer-in-Charge.

Providing 20mm thick cement plaster (1:6) finished smooth to inside surface of brick walls after racking out the joints including watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete in all respect as per specification and direction of the Engineer-in-Charge.

Providing 12 mm thick C.P. in C.M.(1:4) to R.C.C surface finished smooth including closed deep chiping with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.

Providing 12mm thick cement plaster (1:6) finished smooth to outside brick walls after raking out the joint including watering and curring with cost and conveyancec of all materials and labour with T & P required for the work with all taxes and royalities etc. complete in all respect as per specification and direction of the Engineer-in-Charge.

Fixing glazed/ceramic tiles in floors on 25mm thick bed of cement morter (1:1) joined with neat cement slurry mixed pigment to match the shades of the tiles incl rubbing and polishing complete incl . Cost of tile etc . Complete

Fixing tiles in Dadoos, skirting and risers of steps on 12 mm thick cement plaster(1:3) joined with neat cement slurry mixed with pigment to match the shade of the tile etc. complete as per direction of Engineer-in-charge.

Finishing surface of walls with one coat of cement based wall putty (water based ) ,cement primer & plastic emulsion paint of approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials , taxes , labour with T & P etc. complete as per E.I.C.

Priming one coat with any approved primer over plastered surface as per direction of the Engineer-in-charge.

Finishing walls with weather coat of approved shade on new work two coats to give an even shade including cost of paint.

Painting two coats of enamel paint to new wood work and iron work including cost of paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge.