Rural Development Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Construction Of Modular Icu, Cssd, Modular Ot And One Vision Centre
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_EICCL_74850_1Bid Award Id
ViewTender No
C.E. (B) - 30 / 2021-22Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m. etc. complete in all respect as directed by the Engineer- in -charge.
106.92
-
-
... More
Disposal of surplus excavated materials by mechanical means from the work side etc. complete. upto 5km. Lead
491.45
-
-
... More
Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
289.06
-
-
... More
Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge.
2244.34
-
-
... More
Providing and laying in position ready mixed M-25 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
-
-
-
... More
Foundation & Plinth
-
-
-
... More
RCC in Footing
107.71
-
-
... More
RCC in Column from Pedestal top to NGL
8.32
-
-
... More
RCC in Column from NGL to FGL
6.81
-
-
... More
RCC in Column from FGL to PL
9.08
-
-
... More
RCC in Lift wall
5.95
-
-
... More
RCC in Plinth beam
118.45
-
-
... More
Ground floor
-
-
-
... More
RCC in column
52.57
-
-
... More
RCC in roof beam
100.23
-
-
... More
RCC in roof slab
231.44
-
-
... More
RCC in S.case
10.63
-
-
... More
RCC in Lintel
19.11
-
-
... More
RCC in Sill
11.43
-
-
... More
RCC in Chajja
53.45
-
-
... More
RCC fin
42.04
-
-
... More
RCC Wall
12
-
-
... More
RCC in Platform slab
3.78
-
-
... More
First Floor
-
-
-
... More
RCC in column
52.57
-
-
... More
RCC in roof beam
104.58
-
-
... More
RCC in roof slab
231.44
-
-
... More
RCC in S.case
10.17
-
-
... More
RCC in Lintel
19.03
-
-
... More
RCC in Sill
11.34
-
-
... More
RCC in Chajja
73.67
-
-
... More
RCC fin
34.62
-
-
... More
RCC Wall
12
-
-
... More
Platform Slab
3.78
-
-
... More
Second Floor
-
-
-
... More
RCC in column
52.57
-
-
... More
RCC in roof beam
90.17
-
-
... More
RCC in roof slab
233.09
-
-
... More
RCC in S.case
7.4
-
-
... More
RCC in Lintel
19.42
-
-
... More
RCC in Sill
11.91
-
-
... More
RCC in Chajja
65.56
-
-
... More
RCC fin
24.62
-
-
... More
Platform Slab
3.78
-
-
... More
Terrace Floor
-
-
-
... More
RCC in Column
16.91
-
-
... More
RCC in roof beam
7
-
-
... More
RCC in roof slab
20.82
-
-
... More
RCC in Lintel
1.27
-
-
... More
RCC in Sill
0.67
-
-
... More
RCC in Chajja
5.65
-
-
... More
RCC Stair case
1.89
-
-
... More
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
Foundation
306.8
-
-
... More
Ground floor
505.9
-
-
... More
First floor
513.31
-
-
... More
Second floor
477.81
-
-
... More
Terrace Floor
63.11
-
-
... More
Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of Engineer-in-Charge.
47.22
-
-
... More
Aerated Autoclaved Fly ash bricks/ Masonary in fillers/ inside walls using A.A.C. blocks of size 625mmX200mmX200mm having compressive strength more than 4N/ sqmm confirming to IS:2185-Part-3-1984 & IS:6441-1972 of Lean/Aerolite or equivalent products in cement mortar of mix (1:6) using cement of approved quality, screened & washed sand for use in super structure including splays cutting, circular moulding , corbrlling, champering & similar such type of works, watering & curing etc. including cost, conveyance, royalty, loading, unloading of all materials, cost of labour, scaffolding, sundries, T & P required for the works etc. complete in all respect as per specification and direction of the Engineer-in-charge.(O.M NO-3728 Dt-17.03.2018 of Works Department)
-
-
-
... More
Ground floor
295.75
-
-
... More
First floor
300.51
-
-
... More
Second Floor
313.95
-
-
... More
Terrace Floor
51.28
-
-
... More
Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 25c.m x 12 c.m x 8 c.m in super structure having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties , all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
-
-
-
... More
Ground floor
20.4
-
-
... More
First floor
20.54
-
-
... More
Second Floor
20.5
-
-
... More
Terrace Floor
41.03
-
-
... More
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties, with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect and specification and direction of the Engineer in charge. (Outer side plastering)
-
-
-
... More
Ground floor
1087.41
-
-
... More
First floor
898.58
-
-
... More
Second Floor
966.16
-
-
... More
Terrace Floor
794.47
-
-
... More
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties, with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect and specification and direction of the Engineer in charge. (Inside plastering)
-
-
-
... More
Ground floor
3752.77
-
-
... More
First floor
3963.9
-
-
... More
Second Floor
3972.05
-
-
... More
Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary)including watering and curing,rounding of corners etc. complete with cost,conveyance,loading, unloading,royalities and taxes of all materials,cost of all labour,T&P and scaffolding required for the work etc. as directed by the Engineer-in-charge.
-
-
-
... More
Ground floor
127.31
-
-
... More
First floor
124.53
-
-
... More
Second Floor
126.09
-
-
... More
Terrace Floor
226.36
-
-
... More
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance and royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
1910.63
-
-
... More
First floor
2000.31
-
-
... More
Second Floor
1599.65
-
-
... More
Terrace Floor
182.32
-
-
... More
Priming one coat with water bound wall cement primer with cost, conveyance, all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor (outside)
1087.41
-
-
... More
inside
5790.71
-
-
... More
First Floor (outside)
898.58
-
-
... More
inside
6088.73
-
-
... More
Second Floor (outside)
966.16
-
-
... More
inside
5697.78
-
-
... More
Terrace Floor (outside)
794.47
-
-
... More
inside
408.67
-
-
... More
Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground floor
5790.71
-
-
... More
First floor
6088.73
-
-
... More
Second Floor
5697.78
-
-
... More
Terrace Floor
408.67
-
-
... More
Painting two coats with plastic emulsion paint with a approved quality primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground floor
5790.71
-
-
... More
First floor
6088.73
-
-
... More
Second Floor
5697.78
-
-
... More
Terrace Floor
408.67
-
-
... More
Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & with a approved quality primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
-
-
-
... More
Ground floor
1087.41
-
-
... More
First floor
898.58
-
-
... More
Second Floor
966.16
-
-
... More
Terrace Floor
794.47
-
-
... More
Supplying,Providing & laying Double charge mat finished vitrified tile flooring using vitrified tiles having thickness of 8mm to 10mm conforming to IS 13755 of 800mmx800mm of premium quality of approved make (JOHNSON /OASIS/ VARMORA / SOMANY/ KAJARIA or equivalent ) in floors, treads on steps and landings on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
266.14
-
-
... More
First floor
228.95
-
-
... More
Second Floor
214.98
-
-
... More
Supplying, fitting & fixing of Double charge mat finished vitrified wall tile using vitrified tiles having thickness of 8mm to 10mm conforming to IS 13755 of 800mmx800mm of premium quality of approved make (JOHNSON /VARMORA/ OASIS / SOMANY/ KAJARIA or equivalent ) laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor
1.49
-
-
... More
First floor
3.41
-
-
... More
Second Floor
10.19
-
-
... More
Providing 16mm. thick finished kota stone flooring using kota stone of approved quality, colour and size above 0.10 sqm in floors, treads on steps and landing on 20mm. thick bed of cement mortar mix of (1:4) with screened and washed sharp river sand for mortar and cement of approved quality, grouted with neat white cement slurry laid in proper slope joining the Kota stone with neat white cement slurry mixed with required quantity of pigment of approved marks to match the shades of the kota stone to kota colour if required, watering and curing for the required period , including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T&P required for the work including cost of rubbing mechanically and wax polishing etc complete in all floors at all height in all respect as directed by the Engineer-in-charge.
-
-
-
... More
Ground Floor
14.49
-
-
... More
First Floor
68.27
-
-
... More
Second Floor
60
-
-
... More
Providing 16mm. thick finished kota stone in dado/skirting using kota stone slab above 0.10 sqm of approved quality, colour and size in dado, risers of steps on 12mm. thick bed of cement mortar mix of (1:3) with screened and washed sharp river sand for mortar and cement of approved quality, grouted with neat white cement slurry laid in proper slope mixed with required quantity of pigment of approved marks to match the shades of the kota tiles to kota colour if required, watering and curing for thr required period, including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. in all floors at all height complete in all respect as directed by the Engineer-in-charge.
-
-
-
... More
Ground Floor
1.49
-
-
... More
First Floor
8.45
-
-
... More
Second Floor
6.6
-
-
... More
Providing,fixing of Chequred tile of approved size and quality over 20mm. Bed cement CM(1:4) and filling the joints with slurry etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, Labour cess ,sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. complete in all respect.
-
-
-
... More
Ground Floor
137.69
-
-
... More
Providing , fitting & fixing of Tactile flooring confirming to IS 4457:2007 of approed size 300mmx300mmx15mm with button profile=10mm+4.5mm, Tac liner profile = 10mm+4.5mm, low water absorption below below 0.5% of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ) in floors on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.
155.79
-
-
... More
Providing Mat finished Granite stone prepolished 20mm thick of area above 0.40 Sqm in flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, Labour cess ,sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
1511.75
-
-
... More
First Floor
634.83
-
-
... More
Second Floor
1052.76
-
-
... More
Terrace Floor
63.69
-
-
... More
Providing Mat finished Granite stone prepolished 10mm thick of area above 0.40 Sqm in dado/skirting,riser of steps of approved quality, colour and size in dado/ skirting,riser of steps,wall on 12mm thick bed of cement mortar of mix (1:3) laid in proper plumb and line with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, Labour cess ,sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
24.9
-
-
... More
First Floor
24.9
-
-
... More
Second Floor
24.9
-
-
... More
Terrace Floor
9.66
-
-
... More
Fixing of Ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 of size 30cm x 20cm / 20cm x 20cm of approved make (JOHNSON /OASIS /VARMORA/ SOMANY/ KAJARIA or equivalent ) in dados skirting & riser of steps on 12mm thick cement plaster 1:3 joined with neat cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, royalties of all materials, labour with T&P complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
Ground Floor
1098.74
-
-
... More
First Floor
748.3
-
-
... More
Second Floor
662.12
-
-
... More
Supplying, fitting and fixing vetrified Industrial tiles in floors of premium grade having thickness 8mm to 10mm of size 300mm x 300mm confirming to IS 4457 with colour / printed series of approved make (JOHNSON /VARMORA/ OASIS / SOMANY/ KAJARIA or equivalent ) on 20mm thick bed of C.M. (1:4) including cost of all materials, labour, T&P etc. required for the work in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
131.52
-
-
... More
First Floor
131.52
-
-
... More
Supplying, fitting and fixing Vitrified germ free floor tiles of 8-10mm thickness of 600 x 600mm size with water absorption less than 0.06 % and conforming to I.S. 13006 (Min thickness 9mm), breaking strength of min 1400N, with germfree property and resistance to deep abrasion of less than 144mm3 of approved make, in all colors & shade of approved make (JOHNSON /VARMORA/ OASIS / SOMANY/ KAJARIA or equivalent ) in floors on 20mm thick bed of C.M. (1:4) (1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
47.5
-
-
... More
First Floor
308.19
-
-
... More
Sealed Automatic Hermatically glazed door
-
-
-
... More
Supply, instalation, fitting & fixing, testing and commissioning of Sealed Automatic Hermatically glazed door in OT of approved make to maintain sterility and the correct air pressure in the room,all doors in to and out should be of the sliding,hermetically sealing type. Track system and door blade guide system: automaticaly operated hermetically sealing sliding main door on OT, of Size 1800 X 2100 mm Door Leaf Strength of leaf core : 40mm (33mm tubular chipboard (core) + 3mm MDF (medium-density fiberboard) on both sides + 0,8mm HPL ( Steripanel High Pressure Laminate) on both sites). Circumferential profile :Anodized aluminum profile, circumferential 56 mm, V- shaped in the bottom area towards door lead on ground lobes. Surface : 0.8 mm HPL-laminate on 3 mm MDF-board as carrier material; depending on the chosen material a free passage of 1.15 m or more may require a seam in the laminate. Sealing : Rubber gaskets embedded in the door leaves press against the frame and the door, providing a hermetic sealing of the door. Rail System Guide rail : Anodized aluminum profile with two countersunk slots at 42° for carrying wheel position in closed condition. Carrying wheels : Ball bearing with duroplastic rolls. Covering : Rounded covering of extruded anodized aluminum. Ground Rail : Duroplastic lead lobes on bottom running rail. Operation Handle : Bilateral (inside/outside) stainless steel lever arm handle with integrated return spring to neutral position Frame HPL-system frame : HPL-coated embrasure board with circumferential aluminum corner protection profiles for arbitrary wall strengths with all taxes complete including cost, conveyance, taxes of all materials, labour, transportation charges etc as per specification and direction of the Engineer-in-charge. Make :- Metaflex/United/Altos
-
-
-
... More
First floor
1
-
-
... More
Providing and installation of Primo Premium Vinyl Sheet Flooring manufactured by Tarkett or equivalent with a nominal thickness of 2mm as per ISO 24346 - EN 428 and width of 2m as per ISO 24341 - EN 426. The nominal thickness of the wear layer shall be 2mm. The wear surface shall be PUR reinforced. Primo Premium shall conform to requirement of ISO 10581 - EN 649. Primo Premium shall have binder content of Type I as per ISO 10581, Fire resistance of 8kW/m2 as per ISO 9239-1 and Class Bfl-S1 as per EN 13501-1, Indentation of less than .03mm as per ISO 24343-1 and EN 433, Slip Resistance of R9 as per DIN 51130, greater than 0.3 as per EN 13893. The static electrical discharge shall be less than 2kV as per EN 1815. Primo Premium shall have Class A as per ASTM F24 F51 and ISO Class 4 as per ISO 14644-1 for the Clean room test. The product does not contain Pthalate based plasticizer and emission rate of VOC is very low, measured after 28 days as per EN 16516. TVOC and formaldehyde emissions are below 10µg/m3. It is 100% REACH compliant. The product is fit to be used in Class 34 in Commercial and Class 43 in Industrial as per EN ISO 10874.
The product is installed using multi coloured welding rods to ensure seamless finish. The average seam strength shall be more than 240N/50mm as per EN 684. The floor finish should terminate at the room perimeter passing over a concealed cove former and continuing up the wall for 100mm. All joints should be welded with electrodes of the same compatible material to provide a continuous sealed surface including all complete as per direction of EIC.
196.63
-
-
... More
TORO SC (Conductive flooring for OT, ICU, Cath lab, Etc)
Providing and installation of iQ TORO SC Vinyl Sheet Flooring manufactured by Tarkett with a nominal thickness of 2mm as per ISO 24340 - EN 429 and width of 2m as per ISO 24341 - EN 426. iQ TORO SC shall conform to requirement of ISO 10581 - EN 649. iQ TORO SC shall have binder content of Type I as per ISO 10581, Fire resistance of 8kW/m2 as per ISO 9239-1 and Class Bfl-S1 as per EN 13501-1, Indentation of less than .03mm as per ISO 24343-1 and EN 433, Slip Resistance of R9 as per DIN 51130, greater than 0.3 as per EN 13893. The static electrical discharge shall be less than 2kV as per EN 1815. The electrical resistance of the product shall be less than 10^8 Ω as per EN 1081. The product does not contain Pthalate based plasticizer and emission rate of VOC is very low, measured after 28 days as per EN 16516. TVOC and formaldehyde emissions are below 10µg/m3. It is 100% REACH compliant. The product is fit to be used in Class 34 in Commercial and Class 43 in Industrial as per EN ISO 10874.
The product is installed using multi coloured welding rods to ensure seamless finish. The average seam strength shall be more than 240N/50mm as per EN 684.
The flooring should be laid on a smooth, clean sub floor which shall be prepared by self-levelling compound (Make: KERATECH ECO or equivalent) with primer (Make: A Eco or equivalent) which will perform correction of irregularities, un-even substrate, develops high levels of resistance to the solvent action of water, recyclable as an inert material, very low volatile organic compound emission etc.
349.02
-
-
... More
Providing and installation of Homogenous Vinyl Sheet for wall with a total thickness of 1.3 mm as per ISO 24346 - EN 428, width of 2m as per ISO 24341 - EN 426, weight of 2.100 g/m2 as per EN ISO 23997.. The wear surface shall be PUR reinforced. It shall conform to requirement of wetroom as per GBR class VT. It shall have Class A as per ASTM F24 F51 and ISO Class 4 as per ISO 14644-1 for the Clean room test. he product does not contain Pthalate based plasticizer and emission rate of VOC is very low, measured after 28 days as per EN 16516. TVOC and formaldehyde emissions are below 10µg/m3. It is 100% REACH compliant. The product is fit to be used in Class 34 in Commercial and Class 43 in Industrial as per EN ISO 10874.
The product is installed using multi coloured welding rods to ensure seamless finish. The average seam strength shall be more than 240N/50mm as per EN 684
745.66
-
-
... More
MODULAR MONOBLOCK CEILING PANELS
-
-
-
... More
Supply, fitting & fixing of Modular Monoblock Ceiling Panel ( inside the OT) of approved make with GP/SP Sheet of thickness 0.8 mm. The Back Sheet should be factory powder coated to prevent it from rusting. The Ceiling Panel shall be injected with Poly Urethane Foam (PUF) with a minimum density of 40 Kg/m3. The Ceiling Panel shall be sealed with Aluminum Extrusion to make the structure rigid. The Total Thickness of the Ceiling Panel shall be 50 mm. The Corner Panels for the Operation Theatre shall be made up of be made of GP/SP Sheet of thickness 0.8 mm (Front Side) and PPGI Sheet of thickness 0.8 mm (Back Side). The Back Sheet should be factory powder coated to prevent it from rusting. The Corner Panels should be factory fitted with Ducting and Return Grill Cutouts for easy connection. The Sheet shall be from any reputed make such as (TATA/JINDAL/SAIL) with all taxes complete including cost, conveyance, taxes of all materials, labour, transportation charges etc as per specification and direction of the Engineer-in-charge. Make:-United/Altos
-
-
-
... More
First floor
68.7
-
-
... More
2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size HG chips including all cost, conveyance, royalty & taxes etc.comp.to work site for new work as per the specification approved by the department & direction of E.I.C
-
-
-
... More
Second Floor
1764.7
-
-
... More
Terrace floor
100
-
-
... More
Providing & applaying Sika top seal 109 HI over roof slab and parapets before application of SIKA Top seal 109HI the surface should be prime with SIKA 109HI primer , SIKA Fab 1 shall be laid between the coats of water proofing membrame , the entire application cover with SIKA TOP seal HI CC (curing compound) including cost of all materials,Conveyance, labour, T&P etc. complete in all respect as per specification and direction of Engineer-in-charge.
1864.7
-
-
... More
Supplying and Fixing of M.S. Window Grill made out of M.S Flat conforming to IS 2062/2006 painted with Red Oxide Primer as per the design approve by E.I.C including cost,conveyance of all materials,priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge
9358.87
-
-
... More
Painting two coat with approved synthetic enamel paint to new wood & iron work including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.
-
-
-
... More
Ground Floor
72.72
-
-
... More
First Floor
70.11
-
-
... More
Second Floor
70.97
-
-
... More
Terrace Floor
37.92
-
-
... More
Pressed Galvanized steel 120 minutes of metal fire rated doors
-
-
-
... More
Providing and fixing 120 minutes of metal fire rated doors as per IS 3614 part-2:1992 for stability and integrity. Pressed Galvanized steel confirming to IS 277 specification. Door tested & Approved in ARAI(Automotive Research Association of India,Pune) for maximum rating of 2hrs. Door frame shall be Double rebate profile of size 139 x 57 mm made out of 1.20mm minimum thick galvanized steel sheet depends on single & double leaf door.There should be bottom membrane in the frame for proper alignement. Provision should be kept for grouting with cement & sand slurry necessary for fire doors on the clear masonry opening. Door leaf should be 43mm thick fully flush double skin door. Door leaf shall be manufactured from 0.8 mm thick galvanised steel sheet depends on single or double leaf door. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepared for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. painting system will be powder coating finished.
59.88
-
-
... More
Supply, fitting & fixing of Wood polymer composite (WPC) Door Frames with Rebate cuts and Assessories like - L-clamps and screw, finished cross section size 75mm x 45mm / 90mm x 50mm / 115mm x 55mm with 100% water, Termite and Borer proof with Density of 850 kg/m3, 100% recycleable, no contraction/ Expansion, Bend proof, Crack proof with 10yrs written warrantee, 100% Formaldehyde, phenol and Toxic free, swelling proof, screw holding capacity 70kg per screws with all necessary hardware fitting & fixtures etc complete as per directions of EIC.
596.6
-
-
... More
Providing , fitting & fixing of 34mm thick flush door shutter with 32mm thick BWR block board of Century / Green make and pasting 1 mm thick laminate with anti-bacterial property of Green Lam/ Century to be pasted with adhesive including fitting & fixing of all fixtures like SS heavy duty Aldrop, Hydraulic door clousure, SS heavy duty Tower bolt ,Vision panel , SS Door stopper,SS Shape Handle etc ( Make: Dorma)of approved make including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charge
277.08
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge
7.2
-
-
... More
Three track three panels sliding window with SGU
-
-
-
... More
Providing and fixing factory made 3 track 3 panel uPVC white colour sliding glazed window upto 1.50 m in height comprising of uPVC multi-chambered frame having section Frame 105 mm width x 49mm Height, Glass Sash: 37mm width x 61mm Height made out of lead free green profiles of wall thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2/2.0 mm confirming suitable wind load calculations as per IS 875 with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 6mm thick clear glass of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
38.25
-
-
... More
Three track three panels sliding window with DGU
-
-
-
... More
Providing and fixing factory made 3 track 3 panel uPVC white colour sliding glazed window upto 1.50 m in height comprising of uPVC multi-chambered frame having section Frame 105 mm width x 49mm Height, Glass Sash: 37mm width x 61mm Height made out of lead free green profiles of wall thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2/2.0 mm confirming suitable wind load calculations as per IS 875 with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 6mm thick clear glass both side with 12mm thick air gap of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
159.75
-
-
... More
Louvered ventilator
Providing and fixing factory made uPVC white colour louvered ventilator upto 1.5m in height comprising of uPVC multi-chambered frame having section 58mm width X 50mm Height , Glass Sash: 37mm depth x 61mm Height made out of lead free green profiles of wall thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2/2.0 mm confirming suitable wind load calculations as per IS 875 with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 4mm thick pin headed glass of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
25.65
-
-
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge.
2151.87
-
-
... More
Supply and Installation of false ceiling 8 mm thick Tufbloc magnesium oxide HDFR boards of size 1200 x 2400 mm having Density-1000 kg/mt cube, with STC- 34 – 50, weight - 8.5 kg /sq mt, Fire Class - 1&P & Thermal Heat Resistance - 0.11792 W/mK Climate ( degree Centigrade , RH - 50-95 , Green VoC , RC% - Low & 30 Water resistant with wet expansion less than -0.02% from ambient to saturation, Moisture Movement - 0.02% from Anutone / Win Win / Magnum are to be fixed with Philips head screw is fixed by using concealed ceiling system. The concealed ceiling system shall include GI Wall channel(WC 25) having thickness 0.45 mm, length 3600 mm, unequal flanges of 15 & 20 mm and web of 22 mm should be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300 mm centers. Then suspend Main channels(MC 45) having thickness 0.9 mm, length 3600 mm, equal flanges of 15 mm and web 45mm from the soffit at every 1200 mm centers with Suspender angle(SA 25) having thickness 0.45 mm, unequal flanges of 25 & 10 mm. GI Cross channel(CC 25) having thickness 0.45 mm, length 3600 mm, knurled web 35mm, depth of 25 mm and equal flanges 9.5 mm is fastened to the Main channel in the direction perpendicular to the Main Channel at every 600mm centers. Now the jointing & finishing of the same will be done by using Anutone jointing kit consist of powder mixed with water and apply the same with flat flap on the boards joints to finish the surface of the boards so as to look flush. Apply synthetic poly fiber PF 5 x 50 acoustic wool of 50 kg density to be kept on the top of the ceiling by laying on the framework with coist, conveyance, of all materials, labour and T&P required for the work etc. complete in all respect as per direction of Engineer-in-charge. Test certificate of the use products shall be submitted after procurement of materials. ( Make: ANUTONE TUFBLOC or equivalent)
1032.03
-
-
... More
Fixed Glazing with part top hung
-
-
-
... More
Providing and fixing of Fixed Glazing with part Top hung of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Top hung shutter should be of 46 x 46 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 6 mm thick toughened reflective with all taxes complete including cost, conveyance, taxes of all materials, labour, transportation charges etc as per specification and direction of the Engineer-in-charge.
188.37
-
-
... More
Main Structure
Supply, fabrication & fixing of structural steel items made out of channels, angles, flats, plates, chequred plates I section, beam, hollow section any type of frame, space frame, gates, attrium in top, truss, purlins, columns, beams etc. complete as per drawing including primimg with one coat of red oxide primer in all floors as per direction of the Engineer - in - charge.
23000
-
-
... More
Roof cover: Design,Supply,testing, commissioning, fitting & fixing of Double skin Rocklloyd Insulated roofing system for super cyclonic wind speed of minimum 200 Km Per Hour with puncture less top sheet.Bottom sheet-supply&fixing of bare Galvalume Lioydeck profile sheet of 1000mm effective cover width and 30mm height ribs at 200mm center-to center.The feed material is manufactured out of nominal 0.5mm total coated Thickness (TCT) Hi-Strength steel with min.500 Mpa yield strength,metalic hot dip coated with aluminium-Zinc alloy (55% Aluminium 45% Zinc) as per AS 1397- Zincalum/GalvalumeAZ150 (Min 150 gms/sq.mt total on both side ) fixed to the purlins with self tapping and self driling screws insulation layer-supply and laying of rockloyed rockwool NONCOMBUSTABLE fire safe insulation slab of 50mm thickness and 48kg/cum (minimum) density on top of the bottom LIoyddeck sheet confering to IS-8183.Thermal conductivity of insulation slab should not be more than 0.038 W/mk at 20 degree celsius mean temperature along with a layer of aluminium foil as vapour barrier in on top of the insulation .
575
-
-
... More
Insulation material should conforms the fire classification with test procedures to be 476: parts 6& 7 top sheet-supply, fabrication, Erection and installation of on-site single length 0.55mm TCT (Total coated Thickness) colour coated Galvalume LIoyd standing Seam puncture less steel roofing system of nominal 450-46mm effective cover width 50-55 mm rib height with in between stiffeners deep rib fixed to be every purlin by means of GI clip .the panel overlapping shall be machanically field seamed using electric sreamer tool achieve increased weather durability and greater resistance to wind uplift to with stand super cyclonic storm of minimum windspeed 180km/Hr.The steel sheet shall be .55mm TCT having yield strength 300MPa(Fy=300MPa),metallic coated with Zinc-Aluminium alloy (i.e 55% Al,43.4% Zinc,1.6%Si),AZ150(min 150gm/sqmt total on both side) confirms to IS-15961/ AS 1397,prepainted with super Durable Polyester paint (SDP) system of 20m exterior coat on top surface and 5m reverse coat on back surface over 5m primer coat on both surface of approved colour shade by concern authority .The sheet conforms to general requirement of AS/NZS2728 Type 4/IS 15965. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinely of the material. Cocealed fix roof shall be fixed used GI clip fastened with zinc coated or zinc -tin alloy coated Hex head ,self-Drilling screw as per AS 3566-2002 fasteners as per the requirement considering the profile shap and design load .The measurement shall be based on finished /covered surface area.The cost includes all materials, labour, conveyance, scaffolding, T&P etc complete in all respect as per direction of EIC.
-
-
-
... More
Providing and fixing:Supply and fixing of flashing/capping of required shape and size made out of 0.55mm TCT plain color coated Galvalume sheet as per the spection.
52.57
-
-
... More
Road
-
-
-
... More
Earth work in excavation IN ALL KINDS OF SOILS by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) inculding disposal of excavated earth up to 50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of the water pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.
752.19
-
-
... More
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction construction & Clause 305 of MoSRT&H Specifications for Road & Bridge works (4th Revision).
250.73
-
-
... More
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision).
250.73
-
-
... More
Supplying & Filling foundation trenches , plinth & ditches with clean course river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and all taxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
250.73
-
-
... More
Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
250.73
-
-
... More
Providing and laying in position ready mixed M-25 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
208.94
-
-
... More
Disposal of surplus excavated materials by mechanical means from the work side etc. complete. upto 5km. Lead
501.36
-
-
... More
Drain
-
-
-
... More
Earth work in excavation IN ALL KINDS OF SOILS by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) inculding disposal of excavated earth up to 50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of the water pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.
275.12
-
-
... More
Supplying & Filling foundation trenches , plinth & ditches with clean course river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and all taxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
121.07
-
-
... More
Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m. etc. complete in all respect as directed by the Engineer- in -charge.
33.75
-
-
... More
Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
42.33
-
-
... More
Providing and laying in position ready mixed M-25 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
-
-
-
... More
Drain top cover slab
50.12
-
-
... More
Wall
80.2
-
-
... More
Base slab
40.1
-
-
... More
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
170.42
-
-
... More
Disposal of surplus excavted materials by mechanical means from the work side etc. complete. upto 5km. Lead
241.37
-
-
... More
Landscape
-
-
-
... More
Supplying & Filling foundation trenches , plinth & ditches with clean course river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and all taxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in-charge.
46.61
-
-
... More
Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m.
46.61
-
-
... More
E.I. WORK
Sub-Head I (modular Wiring Items)
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & falme retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital. All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
-
-
-
... More
GROUP-A
250
-
-
... More
GROUP-B
100
-
-
... More
GROUP-C
108
-
-
... More
Group control of point in Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Make- Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make A catagory ISI marked as approved as approved 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approved with 6A modular type((anti bactorial & falme retradant type)) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side)(anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
45
-
-
... More
Recessed wirring in existing false ceiling to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia steel conduit ISI mark metallic conduit ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & falme retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa)/Havells(Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital. All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
-
-
-
... More
GROUP-A
45
-
-
... More
GROUP-B
41
-
-
... More
GROUP-C
21
-
-
... More
Group control of point in existing false ceiling wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Make- Finolex/ Anchor/ Polycab/ HAVELLS or equievalant reputed make A catagory ISI marked as approved as approved with 20 mm dia steel conduit ISI mark metallic conduit ISI marked Make-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approved with 6A modular type((anti bactorial & falme retradant type)) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side)(anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
45
-
-
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & falme retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
65
-
-
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (anti bactorial & falme retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant make & model ISI marked as approved , complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 10 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
241
-
-
... More
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & falme retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make A catagory ISI marked as approved, (For equipement power)All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
165
-
-
... More
Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch & socket(modular type) ( (anti bactorial & falme retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, (For equipement power)complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
45
-
-
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZH insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
-
-
-
... More
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
288
-
-
... More
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)
750
-
-
... More
4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallic heavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5)
650
-
-
... More
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit .(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOOR POINT/DG PANEL ESSENTIAL LOAD) (2X4+1X1.5)
650
-
-
... More
4 nos single core 4 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(PDB to PSB/GAYSER. POINT/AC POINT/DG PANEL ACCL TO EACH QTR ESSENTIAL LOAD) (4X4+2X2.5)
350
-
-
... More
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty flexible conduit .(LFDB TO LBDB) (2X6+1X2.5)
188
-
-
... More
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(LFDB TO LBDB/power unit/point) (4X6+2X2.5)
188
-
-
... More
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty flexible conduit .(LFDB TO FLOOR PANEL TO TPN BDB light ) (4X10+2X4)
255
-
-
... More
4 nos single core 16 sq. mm copper wire for phase and neutral and 02 nos of single core 10 sq. mm copper wire for earth continuty conductor in 40 mm dia non metallic heavy duty flexible conduit.(FLOOR PANEL TO TPN BDB power) (4X16+2X10)
255
-
-
... More
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Legrand/Schneider/Siemens/panasonic or equievalant reputed make & model A catagory ISI marked as approved,All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
25
-
-
... More
Supplying and fixing 32 amps, 415 volts, TPN, industrial type socket outlet, with 4 pole and earth metal enclosed plug top along with 32 amps. C-series, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Equievalant higher model of Make-Legrand/Schneider/Siemens/panasonic equievalant reputed make & model A catagory ISI marked as approved.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
4
-
-
... More
Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side)(anti bactorial type) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-Legrand/Siemens/Anchor/Panasonic/ Schneider or equievalant reputed make & model A catagory ISI marked as approved .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
-
-
-
... More
4 moudle(125mmx75mm)
15
-
-
... More
1 moudle(75mmx75mm)
12
-
-
... More
12 moudle(200mmx150mm)
11
-
-
... More
Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE KINJAL/ AKG/Anchor or equievalant reputed make A catagory ISI marked as approved
-
-
-
... More
20 MM
88
-
-
... More
25 MM
84
-
-
... More
Supply and fixing modular type indicator on the existing switch box/cover . Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
21
-
-
... More
Supplying and installation of AC starter Modular type, Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
33
-
-
... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model of Schneider/ Hager/ Siemens/ Anchor/ Panasonic make or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
12
-
-
... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
45
-
-
... More
Supplying,fixing of Blanking plate(modular type)( (anti bactorial & falme retradant type)) in existing switch box(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider (Zencelo)/ legrand( Arteor) / Panasonic (vision), complete suitable for IPH standard hospital.It should be warrantied for a period of 10 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
88
-
-
... More
Sub-Head II (Light fitting Fixture & Fan)
-
-
-
... More
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years.
21
-
-
... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers Make-Equievalant higher model with 5 star rated of Havells/ almonard/ Anchor/ Panasonic/ Usha or equievalant reputed make & model A catagory ISI marked as approved) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years.
10
-
-
... More
Supplying, installation, testing and commssioning of 1400 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/ almonard/ Anchor/ Panasonic/ Usha or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator) as required as per direction of Engg.-in-Charge.Replacement Warranty will be 5 years.
56
-
-
... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/ almonard/ Anchor/ Panasonic/ Ushaor equievalant reputed make & model A catagory ISI marked as approved) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 5 years.. .(With fan Regulator)
200
-
-
... More
Supplying and fixing of Energy efficient Recess mounted LED luminaire made up of CRCA powder coated sheet steel housing of 595 X 595 mm x 70 mm size with of not more than 25W and system lumens output not less than 3250 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic Model no. PBLM21258 or similar model of LT/Trilux /Philips/Wipro or equievalant reputed make & model A catagory ISI marked as approved.) . The luminaire must be Replacement Warranty will be 5 years.
60
-
-
... More
Supplying and fixing of Energy efficient recessed mounted LED luminaire made up of CRCA powder coated housing, Top opening clean room LED luminaire of 600 X 600 x 65 mm size with of 45 W and system lumens output not less than 4500 lumens , IP65 ,dust free & zero maintenance , anti glare high transmittance PMMA diffuser , operating volatge range 150-265 V, high performance potentiometric electronic driver for zero maintenance , 2.5 KV internal urge protection, L70 B 50: 50,000 hrs., CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,,IP 65 protection complete with all other accessories suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. (Make:Panasonic model no: PCRM04458 or similar similar model of /PHILIPS/ /wipro or equievalant reputed make & model A catagory ISI marked as approved ) .The luminaire should be Replacement Warranty will be 5 years. .Each CLEAN ROOM FITTING FOR OT ICU MRI CT.
30
-
-
... More
Supplying and fixing of Energy efficient surface mounted square shape 20 W LED luminaire of dimension of 225x 225 x 35 mm consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty) and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. ( Make : Panasonic Model No: PDLM11206BS similar model of /Trilux/Osram/PHILIPS/Wipro or equievalant reputed make & model A catagory ISI marked as approved).The luminaire should be Replacement Warranty will be 5 years
233
-
-
... More
Supplying and fixing of Energy efficient recess mounted LED luminaire with white powder coated ,pressure die-cast Al housing ,with high transmititivity,non-yellowing PMMA diffuser, with wattage not more than 20 watt and lumen output not less than 2600 Lumen ( 130 lumens/watt ) of size 595 x595 x 70 mm , ,CRI not less than 80,CCT of 5700-6500 degree K,THD less than 10%, with Non integrated isolated driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation), all other accessories , life : 50,000 burning hours (5 years warranty) , Internal surge protection of 3 KV suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. ( Make : Panasonic Model No:PBLM21208 similar model of of LT /Wipro/PHILIPS or equievalant reputed make & model A catagory ISI marked as approved.) The luminaire should be Replacement Warranty will be 5 years.
286
-
-
... More
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 5 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Similar to Panasonic Model No. PBTM08208 or similar model of /PHILIPS/LT/wipro or equievalant reputed make & model A catagory ISI marked as approved.). The luminaire should be Replacement Warranty will be 5 years .
160
-
-
... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge.
( Make : WIPRO Model No:LL20-111-XXX-60-NE or similar model of PHILIPS/Panasonic or equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years
10
-
-
... More
SITC of IP 20 Non-integral flexible LED strip light,High optically efficient diffuser,, 4000K with 12 w/mtr @ 5Mtr pool with Driver extra as required as per direction of Engg.-in-Charge ( Make : Panasonic Model No:PSLM06604 with Driver model no.PSL0S6003 or similar model of /PHILIPS/Wipro or equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years
2
-
-
... More
Supplying and fixing of small focus light for small monuments as 30W , 5700 K required as per direction of Engg.-in-Charge Make : Panasonic Model NO: PFLM11308 or similar model of /PHILIPS/LT/WIPRO or equievalant reputed make & model A catagory ISI marked as approved.)The luminaire should be Replacement Warranty will be 5 years
4
-
-
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
250
-
-
... More
SITC of energy efficient occupancy sensor having power rating not more than 10 watt and all other accessories connection etc as required as per direction of Engg.-in-Charge. ( similar model of WIPRO CRP MODEL or similar model of / /PHILIPS/Panasonic or equievalant reputed make & model A catagory ISI marked as approved. The luminaire should be Replacement Warranty will be 5 years
4
-
-
... More
BDBS,DB,AC DB,FLOOR PANELS,MCBS
-
-
-
... More
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved. as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 5 years
-
-
-
... More
4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD) Warranty on DB is 2 years.
22
-
-
... More
Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITH CORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
12
-
-
... More
2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)
21
-
-
... More
8 Way(8+24) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD)
22
-
-
... More
Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years .MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years.
4
-
-
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years.MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years.
750
-
-
... More
Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA .Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .(4W TPN BDB IC)AC ODU CONTROLLER). The RCCB should be Replacement Warranty will be 5 years
22
-
-
... More
Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/ Snheider/ Siemens / L&T/ Panasonic /ABBor equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years
6
-
-
... More
Supplying and fixing 40Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/ Snheider/ Siemens / L&T/ Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years
6
-
-
... More
Supplying and fixing 63Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand /Snheider /Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.The RCCB should be Replacement Warranty will be 5 years
4
-
-
... More
Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Make-Equievalant higher model of Legrand/ Snheider/ Siemens / L&T/ Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.(for power BDB & AC ODU, 8 way TPN BDB IC).The RCCB should be Replacement Warranty will be 5 years
22
-
-
... More
(Earthing) INSTALLATION
-
-
-
... More
S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 5 years
2
-
-
... More
S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 5 years
6
-
-
... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
121
-
-
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
45
-
-
... More
Providing and fixing 50mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
39
-
-
... More
Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge.
4
-
-
... More
CABLING AND END TERMINATION MAIN AREA
-
-
-
... More
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
-
-
-
... More
3.5core x 300 sq mm ( TO MAIN PANEL TRIPPLE /FOUR RUN/DG SET TO MAIN PANEL TRIPPLE RUN )
225
-
-
... More
3.5core x 185 sq mm (MAIN PANEL UPS MAIN INCOMMER/ac odu panel incommer/ups panel incommer/AC PANEL INCOMMER)
50
-
-
... More
3.5core x 150 sq mm(MAIN PANEL to floor power panel 02 nos for each panel)
40
-
-
... More
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
-
-
-
... More
3.5core x 95 sq mm ( FOR icu,OT )
40
-
-
... More
3.5core x 70 sq mm ( FOR LIGHT/ICU PANEL/EQUP. PANEL)
45
-
-
... More
4core x 16 sq mm (MDB TO FDBL/FDBU SUB,BDB PANEL 02 runs)
25
-
-
... More
4 core x 4 sq mm (for small power)
57
-
-
... More
3.5core x 35 sq mm (To power BDB/UPS PANEL)
21
-
-
... More
LAYING OF CABLE
-
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
12
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
25
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 120 SQ. MM but not exceeding 400 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
200
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
50
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
30
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge.
30
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
30
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
30
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
30
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 400 SQ. MM From 120 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
31
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
-
-
-
... More
3.5 core x300 sq mm
10
-
-
... More
3.5 core x185 sq mm
8
-
-
... More
3.5 core x150 sq mm
8
-
-
... More
4 core x16sq mm
8
-
-
... More
3.5 core x35 sq mm
10
-
-
... More
3.5 core x70 sq mm
8
-
-
... More
3.5 core x95 sq mm
8
-
-
... More
Providing,fixing and laying of fallowing dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
-
-
-
... More
50 mm dia
11
-
-
... More
80 mm dia
11
-
-
... More
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
-
-
-
... More
200 mm dia
125
-
-
... More
PANELS
-
-
-
... More
FLOOR PANEL AT EACH FLOOR FOR 1F-01,2F-01 RAW POWER
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer- 01 number of 250(160-200) Amps 3P MCCB with encapsulated double break . (make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked)(Icu=100%Ics)with shunt trip.with axulary for BMS.
Busbar- 04 numbers of 300Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.
Out going- (i) 63A 4P MCB 08 NOS FOR POWER BDB (Legrand/Schneider make)or laundry washing machine motor.
Out going- (ii) 08 nos 32A 4P MCB LIGHT BDB AC IDU BDB/LIGHT BDB(Legrand/Schneider make) or laundry washing machine motor
Out going- (iii) 01 nos 100A 3P MCCB FOR RAW POWER.(make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked).
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-200Amps Ameter with selecter switch & CTS.(DIGITAL).
(iii) 01 set of 0-500 voltmeter with selecter switch.(DIGITAL).
2
-
-
... More
FLOOR PANEL AT EACH FLOOR FOR 1F-01,2F-01,SPARE LIGHT
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer- 01 number of 125 (80-100)Amps 3P MCCB with encapsulated double break . (make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked)(Icu=100%Ics)with shunt trip.with axulary for BMS.
Busbar- 04 numbers of 150Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator. Out going- (i)40A 4P MCB 04 NOS FOR EM. POWER BDB (Legrand make).
Out going- (ii) 08 nos 32A 4P MCB POWER BDB AC IDU /LIGHT BDB.
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-100Amps Ameter with selecter switch & CTS.(DIGITAL).
(iii) 01 set of 0-500 voltmeter with selecter switch.(DIGITAL)
2
-
-
... More
MAIN UPS PANEL (100) KVA 2 NOS ON LINE UPS 3PH-3PH)AT GF control room FOR OT/ICU AREA
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR OT/ICU ALL LOAD)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer-01- 02 number of 250A,ICU=0.8 In 4P TYPE,MCCB (make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked) .With axulary for BMS.(From 100 KVA UPS)(Provission for EM. Connection of UPS parallel to system.
BUS COUPLER - 01 number of 250A,ICU=0.8 In 4P TYPE,MCCB (make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked) .With axulary for BMS.
Busbar-1- 03 numbers of 01 SETS 300Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.
-
-
-
... More
Out going-1- (i) 04 numbers of 160A 4P MCCB(DSINE) (make- L&T or equivalent reputed make ISI marked) For OT /ICU/TEST room panel/blood bank power.(Legrand/Schneider make).
Out going-2- (i) 8 nos 32A TPN MCB for OT ,ICU Lighting with anathesia/blood bank lighting,BDB UPS of each floor(02 nos each)(Legrand/Schneider make).
Out going-3- (i) 04 nos 40A TPN MCB for OT ,ICU Lighting with anathesia/blood bank lighting.
Instrument- (i) 06 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 02 sets of MFM with RS485 & CTs.
iii) 04 nos 40kA SP VSD with 32A SP MCB.(Legrand/Schneider make)
NB- This panel should have proper earth by suitable rated copper flat.
1
-
-
... More
MAIN AC PANEL FOR OUTDOOR UNIT OF Hospital at roof top(FOR ODU OF VRF)
-
-
-
... More
S/I/T&Commissioning of LT OUTDOOR mounted on roof top area with IP-65 PROTECTION floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer- 01 number of 400A 3P MCCB,36 Ka with under voltage,over voltage ,current,earth fault protection (make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked).
Busbar- 04 numbers of 500Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.
Out going- (i) 63A 4P RCCB,100MA 4 NOS FOR OUT DOOR UNIT UPTO 30 KW(Legrand/Schneider make).
Out going- (i) 100A 4P RCCB,100mA 4 NOS FOR OUT DOOR UNIT UPTO 45 KW (Legrand/Schneider make).
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of digital type multifunction meter with CT for voltage, current, frequency, PF, THD indication.
(iii) 04 nos of 65kA SP VSD WITH 32A SP MCB
1
-
-
... More
MAIN CONTROL PANEL AT GF WITH BUSCOUPLING SYSTEM
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer-1- 01 number 4p 1250A EDO TYPE ACB with 1. Micro Processer Based with Breaking capacity - Icu= Ics= Icw= 50kA for 1 sec having LSING Protection with Display-Current Metering with Last Trip Record Data. (Communication with On & Off Status indication for Remote Closing and Opening operation of breakers through Modbus RS485 protocol and uploading breaker status to Users Computer/SCADA.) & Electrical locking for normal & DG (make-Equievalant model of Schneider(NW 6.0) / ABB (E max PR 121)/ L&T ( U power MTX 4.5 )/ Siemens (3WL ETU 76B) Legrand(Equievalant model),or equievalant make with proper model ISI marked) (WITH AXULARY FOR BMS) (WITH AXULARY FOR BMS)(750 KVA TRANSFORMER)
1
-
-
... More
In commer-2- 01 number of 4p 800A EDO TYPE ACB with 1. Micro Processer Based with Breaking capacity - Icu= Ics= Icw= 50kA for 1 sec having LSING Protection with Display-Current Metering with Last Trip Record Data. (Communication with On & Off Status indication for Remote Closing and Opening operation of breakers through Modbus RS485 protocol and uploading breaker status to Users Computer/SCADA.) & Electrical locking for normal & DG(make-Equievalant model of Schneider (NW 6.0) / ABB (E max PR 121)/L&T ( U power MTX 4.5 )/ Siemens (3WL ETU 76B) Legrand(Equievalant model), or equievalant make with proper model ISI marked) (WITH AXULARY FOR BMS) (500 KVA DG 01 NO).
Busbar-1&2 04 numbers of 1500Amps Aluminium busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing).
Out going- 02 numbers of 400A 4P Icu=10%Ics, encapsulated roto operative double breaktype, LSIG MCCB with micro processor based release with adjustable overload from 36%-100% ,Comminucation module , ibuilt current,voltage & energy metering,ZSI & Electrical locking for normal & DG (make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked)(HVAC & MEDICAL EQUIPEMENT).
-
-
-
... More
Out going- 08 numbers of 63A 4P MCB (make- Legrand or equivalent reputed make ISI marked)(timer panel & water supply management,LIFT,condensor & chiller pump).
Out going- 5 numbers of 250A 4P Icu=10%Ics, encapsulated roto operative double breaktype, LSIG MCCB with micro processor based release with adjustable overload from 36%-100% ,Comminucation module , ibuilt current,voltage & energy metering,ZSI & Electrical locking for normal & DG (make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked)(SPARE,MRI,POWER PANEL EACH FLOOR,FIRE,Cooling tower of chiller).
Out going- 6 numbers of 125A 4P Icu=10%Ics, encapsulated roto operative double breaktype, LSIG MCCB with micro processor based release with adjustable overload from 36%-100% ,Comminucation module , ibuilt current,voltage & energy metering,ZSI & Electrical locking for normal & DG (make- LEGRAND/Schneider/ABB/Siemens, ISI marked)(LIFT,WATER,FLOOR LIGHT,CT SCAN).
Out going- 1 numbers of 200A 4P MCCB ((make-ABB/ Siemens/ SCHNEIDER/ L&T/ Legrand, ISI marked)(FOR UPS/ac).
Out going- 8 numbers of 32A 4P MCB ((make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked)(LIGHT SUPPLY).
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 02 set of digital type multifunction meter with CT for voltage, current, frequency, PF, THD indication with RS 485 COMPACTIVITY FOR bms data.
(iii) 8 nos of 65kA SP VSD WITH 32A SP MCB.
-
-
-
... More
MEDICAL EQUIPEMENT PANEL
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR ALL MACHINE LOAD) as per direction of Engg.-in-Charge.
In commer-01- 01 number of 400A,ICU=0.8 In 4P TYPE,MCCB ((make-ABB/ Siemens/ SCHNEIDER/ L&T/ Legrand, ISI marked) .With axulary for BMS.
Busbar-1- 04 numbers of 01 SETS 500Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.
Out going-1- (i) 01numbers of 125A 4P MCCB(make-ABB/ Siemens/ SCHNEIDER/ L&T/ Legrand, ISI marked) For MACHINE POWER.CT & XRAY.
Out going-2- (ii) 01 numbers of 200A 4P MCCB(make-ABB/ Siemens/ SCHNEIDER/ L&T/ Legrand, ISI marked) For MACHINE POWER.MRI.
Out going-3- (iii) 04 nos 40A TPN MCB for MACHINE.
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-300Amps Ammeter with selector switch & CTS.DIGITAL.
(iii) 01 set of 0-500 voltmeter with selector switch.DIGITAL.
iv) 04 nos 40kA SP VSD with 32A SP MCB.
NB- This panel should have proper earth by suitable rated copper flat.
1
-
-
... More
OT/ICU /EMERGENCY PANEL(OT,ICU,SNCU)(UPS) OR RAW POWER
-
-
-
... More
S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING EMERGENCY LIGHT)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
In commer- 01 numbers of 160 Amps 4P MCCB.(make-ABB/ Siemens/ SCHNEIDER/ L&T/ Legrand, ISI marked)(Icu=50% Isc) with shunt trip & axulary for BMS & mechnical inter locking for one incommer source to other.
Busbar- 04 numbers of 180Amps Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator.
Out going- 06 nos 32A 4P MCB UPS Light load for each floor.
Out going- 06 nos 63A 4P MCB OT/ICU POWER/OT MACHINE OR Bed head panel.
Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-200Amps Ammeter with selector switch & CTS.(DIGITAL).
(iii) 01 set of 0-500 voltmeter with selector switch.(DIGITAL).
NB- This panel should have proper earth by suitable rated copper flat.
3
-
-
... More
S/I/T&Commissioning of250KVAR APFC with 630A MCCB 3P as I/C, all branch
protection is with MCB along with capacitor duty contactors,
7% Aluminium Reactor & Capacitor is with 480V AC MPP
Technology (The capacitor should have over current withstand
capability of 2.5xIn, Peak Inrush withstand capability of 350xIn,
Number of Switching operation per year should not less than
15000 & the operating life should be min 200000 hrs) designed as G.A drawing.s per direction of Engg.-in-Charge. (Make-Equievalant higher model of L&T/Schneider/Siemens or equievalant reputed make with proper specification & model ISI marked as approved )Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list. NB- This panel should have proper earth by suitable rated copper flat.The internal wiring of panel must be done by FRLS copper conductor cable .
1
-
-
... More
UPS SYSTEM
-
-
-
... More
Supply ,installation ,testing & commissioning of 100KVA ON LINE UPS SYSTEM WITH suitable size battery bank, rated of battery & isolation transformer, IGBT based inverter system with inbuilt isolation transformer & automatic phase sicuency corrector of 3ph in put to 3 ph output,415V,protection for fault by OL,UV,EF,GF,OC,Ph. Sicuency release of equievalant model of APC/ Schneider/ RELLIO/ Emersion or equievalant reputed make A catogory, ISI marked as approved ) including supply of rack inverter stand with sufficient backup upto 30 min with all required accessories to complete the job including all connection.LOAD OF OT,ICU,BLOOD BANK) as per direction of Engg.-in-Charge. Warrentee period of all accessories & component & system must be 5 years & compelete test certificate must be submitted along with ups including component list & SLD.
1
-
-
... More
20 PASSENGER LIFT WITH WIRRING(1.1)
-
-
-
... More
Design Supply, Installation, Testing & Commissioning and putting into operation with compelete inspection by concerned electrical inspector, Director Factory and Boilers, Odisha with proper testing certificate and final testing of Automatic Lift complete with all standard equipments accessories and control equipments as per Manufacturer's Design with lift control panel including BMS facility and as per BIS and fulfilling following requirements.It includes supply,laying of power cable and fixing of glands,lugs etc.( Machine room less, Gearless Type).Design and as per CPWD /OPWD specification (Part - III Lifts) 1981 with valid lisence for installation and fulfilling following requirements on turnkey basis as per direction of Engg.-in-Charge. HOSPITAL LIFT OF machineroom less type (Make-Kone/ Johnson/ OTIS/ Schindler/ Thysenkrup or equievalant reputed make & model A catogory, ISI marked as approved )Warrentee period of accessories & system must be 5 years & compelete test certificate must be submitted along with Lift including component list .(machine room less type)
-
-
-
... More
Type: PASSENGER LIFT (For Strecher)
Load: 20 PASSENGER(1360 KG)
Speed: 1.0 Meter Per Second.
Control: Variable voltage with variable frequency.
Operation: Microsprocessor based simplex collective selective with / without Lift Attendant.
Total Rise: About 10 Meters.
Landings: For All on same side.
Floors Served: G, 1,2,TERRACE.
Signals: Digital Car Position Indicator, Car Travel direction Indicator in Car & at all Landings.
Lift Shaft Size: About as 20 passenger hospital lift standard, finished with Plaster.
Lift Car Size: About hospital lift standard.
Car Entrance: Clear Opening hospital lift standard high Protected with Car Door.
Landing Entrance: Clear Opening hospital lift standard high Protected with Landing Door.
Car Door: Stainless with front glass to transparent Two Panel Center opening flush type.outer visible.
Landing Door: Mild Steel Two Panel Center opening flush type P.
Door Operation: Automatic Electric Power operated Door with in infrared protection.
Car Interior: Stainless Steel Panel with Hair line finish on all sides.
Car Floor: Hard Wood covered with PVC / Marblex Tiles.
Car Ceiling & Lighting: Fluorescent Lighting Concealed by suspended false ceiling with plain acrylic diffiuser. The frame of suspended false ceiling shall be of powder coated Aluminum.
-
-
-
... More
Car Ventilation: Pressure Fan with anodized Aluminum Grill.
Emergencing Lighting in Car: Battery operated Emergencing Lighting in the Lift Car. Intercom System: Battery operated intercom system in Lift Car, control Room and Control Room.
Emergencing Alarm: Battery operated Alarm Bell System in Lift Car and Control Room.
Position : Directly above the Lift Shaft.
Electric Power Supply: AC 415 Volt 3 Phase 50 Hz terminated in control room
OTHER SPECIAL PROVISIONS
• VVVF CONTROLLER
• AUTOMATICE RESCUE DEVICE (ARD).
• EMERGENCY LIGHT AND BATARY OPERATED ALARAM BELL.
• DOT MATRICKX SEVEN SIGMENT DIGITAL POSITION INDICATORS.
• FIRE RATED DOOR FOR 1 HOUR.
• 3 WAY INTER COM/PRESS AND SPEAK BUTTON WITH HAND SET.
• FLOOR ANNUNCIATOR WITH MUSIC.
• INFRA RED SCREEN.
• OVER LOAD WARNING INDICATOR.
• BRAILLE BUTTONS.
• FREE SERVICE FOR 2 YEARS.
• PIT LADER.
• FULL CAR HEIGH CAR FIXTURE ARRIVAL CHIME.
• PROVISION FOR CC CEMARA WITH INSTRUEMENT
Fire Man Switch: Fire Man Switch at Main Landing Terminal.
2
-
-
... More
CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWER
-
-
-
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 200mm(W), of Legrand - Cablofil make or equievalant reputed make & model A catogory, ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years & compelete test certificate must be submitted .
15
-
-
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 300mm(W), of Legrand - Cablofil make or equievalant reputed make & model A catogory, ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years & compelete test certificate must be submitted .
12
-
-
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 400mm(W), of Legrand - Cablofil make or equievalant reputed make & model A catogory, ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years & compelete test certificate must be submitted .
25
-
-
... More
INSTALLATION OF 1X500KVA DG ONLY FOR EMERGENCY LOAD
-
-
-
... More
500 KVA DG
-
-
-
... More
Supply, Transportation, erection, testing and commissioning of 3 Phase, 415V, 50Hz, water cooled multi cylinder diesel generator set with alternator of 500KVA ( Make -Kirloskar / Jakson / sterling) out put contineous rating directly coupled Engine and Alternator with guard and mounted on a common base plate of Robust construction and complete with AMF panel having IP-52 protection, Acoustic Enclosure as per CPCB norms , sound absorbing material, to restrict sound level up to 75 dB up to 1 mtr distance and as per CPCB norms etc as per following specifications mentioned below.
A. Alternator make : Kirloskar / Stamford / Crompton Greaves / Leroy Somer /Caterpillar or equievalant reputed make & model ISI marked as approved as per direction of Engg.-in-Charge. Warrentee period of panel must be 5 years & compelete test certificate must be submitted along with DG set including component list & smoke exhaust system drawing,certified ISO 8528.
ALTERNATOR:The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21.
-
-
-
... More
ENGINE: Diesel Engine make : Kirloskar / Cummins / Caterpillar / Perkins /Volvo penta /Ashok Leyland / Mahindra & Mahindra / Greaves Cotton /Tata or equievalant make & model ISI marked as approved . Diesel Engine start, developing suitable BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 500KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc.
01. Exhaust pipe of required size and length with insulation or clading.
02. Diesel tank suitable for 8 to 12 Hours running capacity.
03. Residential Silencer.
04. SMF Batteries with leads as per the Manufacturer standards.
AMF PANEL: Cubical, Compartmentalized, AMF Panel Baord with all Power & Control Contractors, Switches, Meters and other accessories, Internal Wiring, connection, inter-connection etc. for Trouble Free smooth function for 500 KVA DG Set complete with Battery Charger & leads as required.
-
-
-
... More
BASE PLATE: Common Base Plate of required size for mounting of Engine Alternator Set fabricated from MS Channerl and vibration damping arrangement with cushy foor mounting including paintng etc. as required. FOUNDATION: Suitable size Cement Concrete (1:2:4) foundation duly plastered and finished with neat coat Cement as required along with smoke exhaust system piping including base frame of structure & lightening protection system. *It also includes 2 nos GI pipe earthing for body and 2 nos copper plate earthing for neutral, control cable of 15mtr 2.5sqmm 6core , civil foundation work.
(The Manufacturing of DG set shall not in any case be more than six months old from the date of award of work).
1
-
-
... More
STREET LIGHT SYSTEM
-
-
-
... More
Supply ,Installation testing commissioning of elegant look Panasonic 120 W LED street light having die cast aluminium housing with toughened glass having lumen output of 14500 or more (As per LM 79 report of third party NABL lab) ,IP 66 protection or more , LED street light model will be vide Panasonic model no. PSTM16CD8 or its equivalent of Philips/LT/WIPRO or equievalant reputed make & model A catogory, ISI marked as approved, with proper model make having warrantied for a period of 5 years . The luminaire to be installed in 9 mtr long GI hot dip galvanized pole of Valmount/Transrail/RR/UTKASH /Utkal Galvanizer make equievalant make with proper model complete with SA bracket internal JB with 4 way connector and MCB as per the pole drawing and direction of EIC against which inspection mat take place. It should be installed after making proper size RCC foundation by considering RCC foundation by using M20 grade RCC & Fe 415 grade reinforcement and fixing the 4 nos. En 8 grade J type fdn bolts in the foundation. The luminaire needs to be wired with 3 c 1 sq mm wire from JB as per the direction of Engg-in -charge.
4
-
-
... More
Supplying, Erection, Fixing, connection & testing of LED BOUNDRY WALL Light of elegant look Panasonic/philips/wiproor equievalant reputed make & model A catogory, ISI marked as approved 35 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more , LED street light model will be vide Panasonic model no. PSTM27358 or its equivalent of Philips/LT/WIPRO make or equievalant reputed make A catagory ISI marked as approved having warrantied for a period of 5 years . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge.
2
-
-
... More
Supplying, Erection, Fixing, connection & testing of Panasonic 40 LED GATE Light of PPTM02408 of Panasonic make or equvalant of Philips/LT/WIPRO or equievalant reputed make A catagory ISI marked as approved maintenance free having 2 years warranty G.I P ipe with braket including MCB box & including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.
2
-
-
... More
Supplying, Erection, Fixing, connection & testing of 120 W LED special type Flood Light of die cast alluminium housing with frame & toughened glass ,IP 66 protection vide panasonic cat no. PFLM19AB8 or equvalant reputed make of Philips/LT/WIPRO Panasonic/philips/wipro or equievalant reputed make & model A catogory, ISI marked as approved having 2 years warranty as approved make G.I cover box including MCB box & including Auto On off provision with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.
2
-
-
... More
Supply of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 5 years
2
-
-
... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required as per direction of Engg.-in-Charge.
122
-
-
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
23
-
-
... More
CABLING
-
-
-
... More
Supplying and laying of one number PVC insulated armoured and PVC sheathed XLPE AL. conductor power cable of 1.1 KV grade POLYCAB/FINOLEX/HAVELLS or equievalant reputed ISI MARKED MAKE of following size cables as per direction of Engg.-in-Charge.Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
-
-
-
... More
4core x 10 sq mm (OFP TO IND. TIMER PANEL)
65
-
-
... More
3.5core x 35 sq mm
65
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
44
-
-
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
86
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
-
-
-
... More
3.5 core x35sq mm
2
-
-
... More
S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type MCB ENCLOSURE made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 20A TPN MCB 01 NOLegrand/Schneider/L&T/ABB or equievalant make & model as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 2 years of acceptance of materials
1
-
-
... More
Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
133
-
-
... More
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
-
-
-
... More
50 mm dia
21
-
-
... More
S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type timer panel with 32A 4P MCB ,40A TP CONTACTOR ,TIMER with 15 nos 10A SP MCB C as per direction of Engg.-in-Charge. .(Equievalant model each item of Legrand/Schneider/L&T/ABB or equievalant make & model)Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for 2 years after acceptance of materials.
1
-
-
... More
(LIGHTENING CONDUCTOR)
-
-
-
... More
AIR TERMINAL & ACCESSORRIES LIGHTNING ARRESTER+ MAST: Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long, G.I tube,having single prong at top, with 85 mm dia 3 mm thick G.I base plate including holes etc complete as required with as per direction of Engg.-in-Charge.(RATE REFERING OSR 2018 SOR NO-4.2) .The entire LA system should be Replacement Warranty will be 5 years
4
-
-
... More
Reveting, sweating and soldering of copper / G.I. tape ( with another copper / G.I. tape, base of the finial or any other metallic object) as required .as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.4) The entire LA system should be Replacement Warranty will be 5 years
60
-
-
... More
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) as per direction of Engg.-in-Charge.(RATE REFERING OSR 2018 SOR NO-4.7) The entire LA system should be Replacement Warranty will be 5 years
60
-
-
... More
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For virtical run) as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.8) The entire LA system should be Replacement Warranty will be 5 years
41
-
-
... More
Providing and fixing of testing joint, made of 20 mm x 3 mm thick G.I. strip, 125 long with 4 nos of G.I. bolts, check nuts and spring washer etc complete as required as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.12) The entire LA system should be Replacement Warranty will be 5 years
12
-
-
... More
Providing and laying of G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required as per direction of Engg.-in-Charge. .(RATE REFERING OSR 2018 SOR NO-4.14) The entire LA system should be Replacement Warranty will be 5 years
15
-
-
... More
Maintenance free Safe Earthing Electrodes with ISI G.I. pipe dia 75mm as Secondary electrode with wall thickness of 2.6 mm and the Primary Earthing Electrode will be 50mm X 6mm X 1no M.S. hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the Primary Earthing and the secondary Earthing, the Surface Area in will be 7,06,500sqmm for 3mtrs length and Cross Sectional Primary conducting area is 300 sq.mm. An Solid G.I. Base plat seals the unit at the bottom. as per direction of Engg.-in-Charge. (MES-GFC ground Filling compound will be provided in 25 kgs Bags.)(MES-GFC ground Filling compound will be provided in 25 kgs Bags.)(2 bags required for each earthing electrode.)(FOR lightening protection & Building Electrification).The entire earthing system should be Replacement Warranty will be 5 years.Make-OBO/Star-x/ABB or equievalant reputed make & model A catogory.
2
-
-
... More
ON GRID SOLAR PV SYSTEM & SOLAR WATER HEATING SYSTEM
-
-
-
... More
ON GRID SOLAR SOLAR PV SYSTEM
-
-
-
... More
Supply Installation Testing and Commissioning of on grid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono / Poly Crystalline silicon solar cells, net metering facility ,necessary protections, earthing, mounted on Aluminium / GI structure of suitable strength with following components a complete aas arequired: a) Solar Photovoltaic Module of capacity 330Wp or above, manufactured in India, conforming to IS14286 / IEC61215, IS/IEC61730-Part-1,IS/IEC61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants /systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase , 4 wire, 50Hz +/- 2.5Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree Celcious. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage,frequency. c) Data Monitoring System complete with accessories.d)Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugsand other accessories etc. asarequired.e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/ conduit lugs and other accessories etc. asrequired. with all required accessories as required as per the direction of Engg-in-charge.Make-Kamal Solar/ EMMVEE/ Venus / Anchor/panasonic or equievalant reputed make & model A catogory, ISI marked as approved . The entire SOLAR system should be Replacement Warranty will be 5 years
6
-
-
... More
SOLAR WATER HEATING SYSTEM 1500 LTR
-
-
-
... More
Supplying,installation,testing and commissioning of 3000 LPD Solar Water Heating System Collector Type COPPER with Chrome Coated Total Space required for the Collector 82.64 M2 with all required accessories as required Specification as attached ,tank 3000 LPD SS-304, 5mm thickness with 100mm Insulation at testing 7.5 bar.FPC Collector each of 125Ltrs 24Nos,Accessories ( Stand, Gasket, Welded Nipple, Hose pipe, Nut bolt, etc…500 ltrs SS-304, 3mm thickness tank with PUF insulation at testing of 5bar & Stand,20Kw, Water discharge capacity 415LPH as per the direction of Engg-in-charge .Make-Kamal Solar/ EMMVEE/ Venus / or equievalant reputed make & model A catogory, ISI marked as approved. The entire SOLAR system should be Replacement Warranty will be 5 years
1
-
-
... More
FIRE FIGHTING
-
-
-
... More
PUMPS AND APPURTENANCES
-
-
-
... More
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for nclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads.as per direction of Engineer-in- charge.(Make:Kirloskar/ Wilo/KSB or equievalant )
-
-
-
... More
1620 lpm at 56 m Head
1
-
-
... More
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. of Engineer-in-charge..(Make:PUMP:KBL/ Grundfos / KSB/Wilo) (Disel Engine: KBL/Greaves cotton)
-
-
-
... More
1620 lpm at 56 m Head
1
-
-
... More
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.
Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.(Make:Kirloskar/ Wilo/KSB or equievalant )
-
-
-
... More
180 lpm at 56 m Head
1
-
-
... More
Supply,Installation,Testing & Commissioning of dust and vermin proof front operated compartmentalised cubicle type control panel suitable for operation on 415 Volt, 3 ph, 50 c/s power supply with 630 Amp TPN Aluminium busbar fabricated out of 2 mm thick CRCA sheet duly powder coated after treatment in 7 tank process with top entry cable gland plate including interconnections, earth bus as required comprising of :
INCOMING: One(1)- 400 Amp 36 KA TPN MCCB with microprocessor release, O/L, S/C and E/f release, Voltmeter with s/s, Ammeter with S/s, 3 Nos 630/5 metering CTs of Class 1.0, ON/ OFF indicating lamps, 3 Nos Phase indicating lamp and 4P 6A MCB.
OUTGOING: a)Two(2)-250 Amp MCCB, with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp, 3 Nos CTs metering CTs 250/5, Ammeter S/S.
b) 2 No (Outgoing) – 63 Amp MCCB, with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp,3nos 50/5 CT,Ammeter,S/S
c) 1 Set – Relay, Auto/ Manual Selector Switch, Battery Charger, Annunciation Panel, Control wiring of pressure switches, flow switches and starters etc as required for auto and manual operation of Jockey pumps, Main Electric Pumps and Diesel Engine Pump as per direction of Engineer-in-charge.d)1 lot control wiring from pressure switch to panel board through auxiliary contactor with 1.5 sq. mm unarmoured PVC insulated ,PVC sheathed copper cable etc as required.(Make:Utkal/ ASES or equievalant )
-
-
-
... More
PANEL AS ABOVE
1
-
-
... More
Supply, installation, testing and commissioning of Floor/Wall mounted sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrinkable PVC sleeve, base frame, complete with all accessories including interconnections, earth bus etc as required comprising of. One (1)- 63 Amp, 10 KA,TPN (Class-C) MCB with 3 Nos Phase indicating lamps with control fuse/ MCB, Digital Voltmeter with selector switch. DOL starter with O/L and Single Phasing Preventor suitable for motor. ON/OFF indication lamps, Auto manual switch and ON/OFF push button.(Make:Utkal/ ASES/POWERMAX or equievalant ).
One (1) - Set of Auxilliary relay for automatic operation through pressure switch.
-
-
-
... More
PANEL AS ABOVE
2
-
-
... More
Supply & Laying of XLPE power cable of 1.1 KV grade of following size on Cable.(Make:FINOLEXl/ POLYCAB / RR or equievalant )
-
-
-
... More
3C X 70 sqmm
20
-
-
... More
3C X 16 sqmm
20
-
-
... More
Cable tray
-
-
-
... More
Supplying instalaltion hot dip galvanized ladder type cable tray of following size including installation along wall/ suspended from ceiling with brackets/ threaded suspenders including bends etc as required.(Make:FINOLEX/ POLYCAB / RR or equievalant )
-
-
-
... More
150 mm (W) X 50 mm (H) with 1.2 mm thick sheet
20
-
-
... More
450 mm (W) X 50 mm (H) with 1.6 mm thick sheet
10
-
-
... More
Cable laying
-
-
-
... More
Laying & fixing of one no. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on Cable Tray as required.s per direction of Engineer-in- charge.(Make:FINOLEX/ POLYCAB / RR or equievalant )
-
-
-
... More
Upto 35 Sqmm
20
-
-
... More
Above 35 Sqmm and upto 95 sqmm
20
-
-
... More
End Termination
-
-
-
... More
Supply & Making end Termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable)
-
-
-
... More
3C X 70 sqmm
8
-
-
... More
3C X 16 sqmm
8
-
-
... More
PIPE & VALVES ETC.
-
-
-
... More
Supply,Installation,Testing & Commissioning of 'C' Class heavy duty MS pipe (as per IS 1239 upto 150 mm NB and IS 3589 for above 150 mm 6mm thick) with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanized nuts and bolts of following size on surface along wall / shaft with MS bracket, suspended from ceiling/ beam with suspenders duly painted with two coats of primer and finished with enamel paint of approved colour laid through pipe or in trench after wrapping with hassen cloth after applying coal tar primer as required as per direction of Engineer-in- charge.(Make:TATA/JINDAL/SAIL)
-
-
-
... More
25mm NB
150
-
-
... More
32mm NB
105
-
-
... More
40mm NB
70
-
-
... More
50mm NB
60
-
-
... More
65mm NB
60
-
-
... More
80mm NB
50
-
-
... More
100mm NB
60
-
-
... More
150 mm NB
90
-
-
... More
200mm NB
6
-
-
... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.as per direction of Engineer-in- charge.(Make:TATA/JINDAL/SAILor equievalant )
-
-
-
... More
150mm NB
70
-
-
... More
Providing, fixing, testing and commissioning of following size manually operated hand lever type cast iron double flanged slim seal wafer type Butterfly valves with EPDM iron disc as per IS-13095 having pressure ratting PN -1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of E.I.C.(Make:KARTAR/ZOLOTOLor equievalant )
-
-
-
... More
80mm NB
4
-
-
... More
100mm NB
4
-
-
... More
150mm NB
7
-
-
... More
Providing, fitting & fixing of following size cast iron double flanged type dual plate Non return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of Engineer-in-charge. (Make:KARTAR/ZOLOTOL/SSANT or equievalant )
-
-
-
... More
80mm NB
1
-
-
... More
100 mm NB
1
-
-
... More
150mm NB
2
-
-
... More
Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves of suitable size with all accessories as per direction of Engineer-in-charge(Make:KARTAR/ZOLOTOL/SSANT or equievalant ) .
3
-
-
... More
Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off bronze ball valves with integral strainer & flare nut (mixed ends) of suitable size with all accessories as per direction of Engineer-in-charge. (Make:KARTAR/ZOLOTOL/SSANT or equievalant )
3
-
-
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flangeas per direction of Engineer-in-charge. (Make:KARTAR/ZOLOTOL/SSANT or equievalant )
-
-
-
... More
150mm NB
1
-
-
... More
Supply,Installation,Testing & Commissioning of Air vessel made of 250mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint as required.
1
-
-
... More
WET RISER CUM DOWN COMER SYSTEM
-
-
-
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming
to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :(Make:KARTAR/ZOLOTOL/SSANT or equievalant )
7
-
-
... More
Supply,Installation,Testing & Commissioning of SS short branch pipe with 63 mm male inlet and 19 mm outlet nozzle, as per IS:903 and as per direction of Engineer-in-charge.
7
-
-
... More
Supply,Installation,Testing & Commissioning of 63 mm NB and 15meter long RRL Fire Hose fitted 63mm intstantaneous stainless steel male & female SS coupling, complete by GI wire binding for Internal Hydrant as per direction of Engineer-in-charge.(Make:KARTAR/ZOLOTO/SSANT or equievalant )
14
-
-
... More
Providing supply & fixing of MS Hose Box for of suitable size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-charge.(Make:KARTAR/ZOLOTO/SSANT or equievalant )
7
-
-
... More
Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 20 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I., complete with all accessories as per direction of Engineer-in-charge.(Make:KARTAR/RR/CRON or equievalant )
3
-
-
... More
Providing, fitting and fixing of C.I. 25 MM single air relief valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of Engineer-in-charge. (Make:KARTAR/ZOLOTO/SSANT or equievalant )
2
-
-
... More
Providing, fitting & fixing of 4-Way GM fire brigade connection consisting of 63 mm dia instantaneous type male couplings with built-in check valves, 150mm dia flanged outlet complete with bolts, nuts and rubber insertions confirming to IS:904 with ISI mark including testing & commissioning the system etc. all complete as per apporoved specification & direction of EIC. (Make:KARTAR/ZOLOTO/SSANT or equievalant )
2
-
-
... More
SPRINKLER SYSTEM
-
-
-
... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :Pendent / Upright Sprinkler direction of EIC. (Make:KARTAR/ZOLOTO/SSANT or equievalant )
150
-
-
... More
Providing & fixing of Water Flow Switch switable for pipe 100 mm Diameter with all accessories for all floors etc. all complete as per direction of Engineer-in-charge.(Make:KARTAR/ZOLOTO/SSANT or equievalant )
1
-
-
... More
Providing, laying, testing & commissioning of Flexible Sprinkler Hose Corrugated Unbraided type of length 1mtr for Fire Sprinklers, with 1'' Inlet Nipple BSPT,1/2" Outlet Reducer BSPT,0.7 m Square Supports Bar & Brackets(UL Listed) with all complete accessories as per direction of Engineer-in-charge.(Make:KARTAR/ZOLOTO/SSANT or equievalant )
100
-
-
... More
EXTINGUISHER SYSTEM
-
-
-
... More
Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. (Make:CS-FIRE/SUNMAX/CANEXE or equievalant )
6
-
-
... More
Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6 kg capacity including cost of all material & labour etc complete.
6
-
-
... More
Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge.
2
-
-
... More
AUTOMATIC FIRE DETECTION SYSTEM
-
-
-
... More
Supplying, installation, testing and commissioning of Intelligent Combination Heat potoelectric Smoke Detector, Intelligent Combination Heat Photoelectric Smoke Detector, With Remote Indicator Output and Magnetic Test Function, Without base (Certified by LPCB) Common Detector Base, Common Detector Base for DI-910xE Series Detectors and for DC-910xE series Detectors using EOLR as per direction of Engineer-in- charge. (Make:GST/HONEY-WELL/COOPER or equievalant )
100
-
-
... More
Supply Installation testing and commissioning of Loop Realay Module, Extend Loop Distance and Increase Current Capacity, 24VDC required.as per direction of Engineer-in- charge. (Make:GST/HONEY-WELL/COOPER or equievalant )
1
-
-
... More
CONTROL PANEL
-
-
-
... More
Providing S.I.T.C of Microprocessor based Addressable Fire Alarm Control Panel (2 Loop) Intelligent Fire Alarm Control Panel Two loops with capacity of 477 devices. Flush-mount new structure. 30 Zones, Integrated Wide range PSU (100-240V) with Battery Charger with 2 nos 12volt 9 AH Batteries (Certified by LPCB)as per direction of Engineer-in- charge. (Make:GST/HONEY-WELL/COOPER or equievalant )
1
-
-
... More
Supplying, installation, testing & commissioning of Addressable Single Output Module,Single Output Module, provides dry contact (Loop powered) or active output (24VDC required, cable monitored) (Certified by LPCB)as per direction of Engineer-in- charge. (Make:GST/HONEY-WELL/COOPER or equievalant )
2
-
-
... More
MCP
-
-
-
... More
Supplying, installing ,testing and commissioning of Digital Manual Call Point, Flush mount Resettable (Non-Breaking Glass), Supplied with surface mount back box and Special Reset Key, Optional Accossories:4556356, 4556520(Certified by LPCB) as per direction of Engineer-in- charge. (Make:GST/HONEY-WELL/COOPER or equievalant )
15
-
-
... More
Electronic Hooters
-
-
-
... More
Supplying, installing ,testing and commissioning of Intelligent Sounder Strobe, Addressable Sounder with Visible Indicator, 16 tones, high/low consumption modes, can be loop owered or 24VDC powered, 83-89dB (Certified by LPCB) as per direction of Engineer-in- charge. (Make:GST/HONEY-WELL/COOPER or equievalant )
15
-
-
... More
Wiring
-
-
-
... More
Supplying and drawing of 2X1.5 sq.mm PVC insulated PVC Sheathed FRLS copper cable with 20 mm dia medium class PVC conduit surface/ recessed conduit with all accessories as per direction of Engineer-in-charge.(MakeFINOLEX/POLYCAB/RR or equievalant )
500
-
-
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required as per direction of Engineer-in-charge.
400
-
-
... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated, sheet cover in front including painting etc. as required. 100 mm X 100 mm X 60 mm deep.as per direction of Engineer-in-charge.
80
-
-
... More
Supplying and fixing PVC box of following sizes (nominal size) on surface or in recess with sheet cover in front including painting etc. as required. 100 mm X 100 mm as per direction of Engineer-in-charge..
20
-
-
... More
Supply Installation of Sinage floor, entery Exit, Stair cass,Lift and other.as per direction of Engineer-in-charge.(Make:COOPER/ASES or equievalant )
1
-
-
... More
HVAC WORKS (VRF SYSTEM)
-
-
-
... More
AIR CONDITIONING System Design premble Design Basis - System Has been designed with VRF system having Back arrangement for Critical Area. The Weather Condition has been reffred with JAJPUR Data from INDIA METEOROLOGICAL DEPARTMENT , Govt if India. Heat Load Input data i) Light Load – 1 W / Sq Ft.
ii) Occupancy as per Furniture Layout
iii) Fresh Air – as per Ashrae 62.1-2007
iv) Glass Solar Gain – 0.45
v) Glass U Factor - 0.75 BTU/HR/SFT/°F.
vi) Wall U Factor - 0.36 BTU/HR/SFT/°F.
vii) Partition Load - 0.32 BTU/HR/SFT/°F.
viii) Ceiling / Floor Load - 0.46 BTU/HR/SFT/°F.
ix) Exposed Roof - 0.12 BTU/HR/SFT/°F.
x) Equipment Load – As per Occupancy / 0.15 W Per Computer
IMP Note - Before Executing civil Project, HVAC Design & Equipment Spec has to be submitted and dully vetted by EIC with Architect cum Consultant of this Project through Executing agency. The HVAC Turnkey Sub Contractor Shall Have Min One Year Old GST registration and Service center in Odisha also Must have Experince of Executing Hospital building in odisha.
-
-
-
... More
EQUIPMENTS:
-
-
-
... More
Variable Refrigerant Volume / Flow Air-conditioning System (Heating & Cooling both)
-
-
-
... More
Supply, installation, testing and commissioning of Variable Refrigerant Flow modular type air-conditioning system suitable for Cooling & Heating both by multiple scroll compressor controlled by individual inverter complete with indoor and outdoor units with individual wired and wireless/wired remote controller for indoor units and centralized controller, interconnecting refrigerant piping, full charge of refrigerant gas (R-410A) & oil, internal control cabling and fittings etc. as per details given in specifications & instructions of EICs and having following items. The out door units shall be suitable for 3 phase 4 wire system, 415V + 10 %, 50 Hz AC supply and indoor shall be suitable for Single phase 220-240V, 50 Hz AC supply.
-
-
-
... More
Outdoor Units
-
-
-
... More
Supply, installation, testing & commissioning of Modular type outdoor units equipped with highly efficient scroll compressors(OEM manufactured) fully inverter controlled i.e. changes its speed in accordance to the variation in cooling loads, special heat exchanger, low noise condenser fan, & including full charging of R-410A refrigerant gas complete i/c powder coating complete as per specifications & instructions of EICs. Out door units shall be provided with MS stand of suitable size duly painted with corision resistant paint suitable for outdoor application. The units should be with necessary weather protection coating.The hydrophilic coating should be done before / after bringing the units to site. Out door units shall be provided with MS stand of suitable size duly painted with corision resistant paint suitable for outdoor application.
-
-
-
... More
The units shall be in combination of one or more units which shall be selected in such a way that COP of each unit at 100 % shall not be less than 3.75 and 75% part load shall not be less than 4.40 on standard operating conditions i.e on 35 Deg C DB Ambient and at 27 Deg CDB & 19 Deg CWB inside conditions.Outdoor Unit Shall be suitable for working in minimum 51 deg. C ambient.
-
-
-
... More
All the units shall be provided with built-in microprocessor control panel, for automatic operation and capacity control,which should be air / refrigerant cool. Machines shall be suitable for working with BMS system. SIDE discharge Machines can be allowed for 18 HP with SIngle Compressor. The Units. The Side Discharge Machine Must have 60 Pa condenser Fans static with 3 steps . its Design Requirement so deviation is not acceptable . Only OEM Manufactuered VRF machine & Compressor is acceptable, for Top Discharge Machine 80 Pas with 3 Steps .
It is mandatory that each compressor shall have inverter technology separately i.e. outdoor units shall have all inverter based compressor. Make:Hitachi, Mitshubishi Electric, o General or equivalent with specifciation.
Following capacities of ODUs are at standard operating condition as defined above and Vendor to indicate COP at 100% load & at part loads i.e. 75% & 50% in the data sheets/ shop drawings.Complete in all respect as required at site or as per EIC instruction.
-
-
-
... More
24 HP = (12 HP + 12HP) + 12 HP STANDBY FOR OT COMPLEX FIRST FLOOR
1
-
-
... More
36 HP = 18 HP (W)+ 18 HP(S) FOR ICU BLOCK SECOND FLOOR ICU AHU
1
-
-
... More
24 HP = (12 HP + 12HP) FOR PEDIA
1
-
-
... More
VRV/VRF Ceiling Hung Ductable Units
-
-
-
... More
Supply, Assembly, Erection, Testing and Commissioning of Ceiling Concealed Ductable High Static Type Unit with fittings. Consisting of centrifugal fan, Three speed motor, coil section with DX coil, outer cabinet, filter, insulated drain pan , including all accessories. Cable from indoor unit to socket and headers etc.which shall be supplied by the OEM of VRV/VRF system. Complete in all respect as required at site.
-
-
-
... More
8 HP Ductable Units
2
-
-
... More
10 HP Ductable Units
2
-
-
... More
VRV/VRF 4- Way Cassette Type Units
-
-
-
... More
Supply, Assembly, Erection, Testing and Commissioning of Ceiling Concealed 4-Way Cassette Units with fittings. Three speed motor, multi blade type , duly statically and dynamically balanced to give the required air flow, filter, coil section with DX coil, fresh air intake connector wherever required, outer cabinet, insulated drain pan, built-in drain pump , filter and maintaining motor,along with inbult motion sensor etc including all accessories.Unit shall be able to control individual louver for better operations and human comfort.Cable from cassette unit to socket and headers etc. Complete in all respect as required at site.
-
-
-
... More
2.0 HP 4- Way Cassette Type Units
1
-
-
... More
3 HP 4- Way Cassette Type Units
1
-
-
... More
4 HP 4 - Way Cassette Type Units
1
-
-
... More
Indoor HI WALL Type
-
-
-
... More
1.5 HP
3
-
-
... More
2 HP
2
-
-
... More
2.5 HP
2
-
-
... More
VRV/VRF Corded Remote Controller
-
-
-
... More
Supply, installation, testing & commissioning of LCD touch screen type corded Remote controllers suitable for above indoor units to operate, monitor, ON/OFF, temperature setting, 3 step air flow changing etc. The remote controller shall be suitable for wall mounting with bracket.Complete in all respect as required at site.
-
-
-
... More
Corded Remote Controller
4
-
-
... More
SITC of Refnet Joint for connecting copper pipe
15
-
-
... More
DX TYPE AHU
-
-
-
... More
AIR HANDLING UNIT CEILING SUSPENDED TYPE / FLOOR MOUNTED
-
-
-
... More
Supply installation, testing & commissioning of factory fabricated Double Skinned air-handling unit horizontal type fabricated out of extruded aluminium section with Thermal break Aluminium extruded profile at corners and at joints for double skin air handling units alongwith internal covings with mixing chamber with 0.6mm thick pre-plasticide sheet outside & 0.6 mm thick polished Stainless Steel sheet inside with Direct driven OEM Suitable backward / Forward curved fan and fan motor TEFC (EFF1) type suitable for operation on 415volts±10%,50Hz ± 5% AC supply,fan motor shall be VFD driven including supply installation ,testing & commissioning of VFD (with Harmonic filters) along with compatibility of I/O signals etc complete with other accessories as required, WITH dx 4 RD COIL , prefilter (EU-4) section with non woven synthetic media of 10µ (micron) particle size with an efficiency of 90% , fine filter section with fine filters (EU-6) of 5µ (micron) particle size with an efficiency of 95% shall be provided also.
-
-
-
... More
The polished stainless drain pan of 20 G duly insulated under cooling coil, shall be provided. sheet duly insulated.The Fan & motor shall be as PER OEM selction with Low Space The AHU shall be insulated with 43 mm thick injected fire retardent 40 Kg/m³ density PU foam.The AHU fan shall be pluged type.Marine light with limit switch shall be provided . The AHU shall confirm to standard specification & Schedule of Equipment. The capacity of airhandlers shall be as follows.The face velocity across cooling / heating coil, filters should not exceed 500 FPM. The capacities of airhandling shall be as follows
-
-
-
... More
All the AHUs shall include D.O.L/Star-delta starter with By arrangement of VFD (upto 7.5HP DOL, above 7.5HP star delta), . Fresh air for all AHUs mentioned here under will be 4 ACPH of specified room volume or Desired for room and coils to be sized accordingly and all AHUs to be controlled with OT (control panel) remote controller. Height of the Unit shall restrict to 850 mm Max for ceiling suspended units . Coil shall be 4/6 RD as per design Heat load . TSP for the CSU shall be less than 55 mm of wg and for TFA should be 8 RD and 65 mm TSP . VFD cost shall be included in the AHU itself . The Static Pressure shall be as per detailed desiging and noting will be paid extra if Static requirement has increased as per site situation .
-
-
-
... More
To make complete set AHU smooth operation along with all ahu Conncetion KIT to inclued in AHU cost Itself ,Necessry Sensor etc complete complete in all respect as per direction of EIC. All Air Tight Partion and Trap Door For False Ceiling shall be in False Ceiling Contractor Scope .
Make List - Edgetech / Waves/ zeco / VTS / systemair
-
-
-
... More
OT COMPLEX - 5.5 TR / 3000 CFM / 2 STAGE FILTER / 55 MM STATIC FM TO BE PLACED IN ROOF WITH CANOPY , RETUEN AIR MIXING BOX CANOPY
1
-
-
... More
OT - 8 TR / 4000 CFM / 120 MM STATIC / TO BE PLACED IN ROOF WITH MIXING BOX AND RETURN AIR DAMPER WITH CANOPY
1
-
-
... More
SNCU - 7.5 TR / 3000 CFM / 65 MM STATIC TO BE PLACED IN ROOF WITH MIXING BOX AND RETURN AIR DAMPER & CANOPY
1
-
-
... More
ICU -1 TO 5 FOR SECOND FLOOR 3 TR / 1500 CFM /55 MM STATIC / 2 STAGE FILTER CSU
5
-
-
... More
PEDATRIC - 10 TR / 4000 CFM / 65 MM STATIC / 2 STAGE FILTER / WITH MIXING BOX RETURN AIR DAMPER / WITH CANOPY
1
-
-
... More
REFRIGERANT COPPER PIPING & DRAIN PIPE:
-
-
-
... More
Supplying & Installation of interconnecting following sizes of Refrigerant copper pipe work of following outer diameter, insulated with 13/19 mm , Nitrile Rubber insulation (fire retardent Class "O") insulation in tubing form inclusive of factory laminated ALU cladding as per specifications & instructions of EIC Refrigerant piping shall be laid on GI covered cable trays. Entire refrigerant piping work be carried out in accordance with the specifications & instructions of EICs. Make: Rajco,Mandev,Hindustan.Copper Piping shall be of following sizes:
-
-
-
... More
6.4 mm dia with 13mm thick rubber insulation
70
-
-
... More
9.5 mm dia with 13mm thick rubber insulation
90
-
-
... More
12.7 mm dia with 13mm thick rubber insulation
40
-
-
... More
15.9 mm dia with 13mm thick rubber insulation
55
-
-
... More
19.1 mm dia with 13mm thick rubber insulation
60
-
-
... More
22.2 mm dia with 19mm thick rubber insulation
45
-
-
... More
28.6mm dia with 19mm thick rubber insulation
25
-
-
... More
34.9 mm dia with 19mm thick rubber insulation
35
-
-
... More
41.3 mm dia with 19mm thick rubber insulation
30
-
-
... More
CONDENSATE DRAIN PIPING
-
-
-
... More
Supply & installation, testing and commissioning of Rigid heavy class PVC piping complete with fittings, supports as per specifications & instructions of EICs and duly insulated with 6 mm thick XLPE tubular insulation with factory laminated 7 mill glass cloth.
-
-
-
... More
50 mm dia
30
-
-
... More
32 mm dia
40
-
-
... More
25 mm dia
100
-
-
... More
DUCTING, GRILLS, DIFFUSER AND INSULATION
-
-
-
... More
DUCTING:
-
-
-
... More
Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications & instructions of EICs of following sheet thickness complete as required.
-
-
-
... More
Thickness 0.63 mm sheet (24 Guage)
100
-
-
... More
Thickness 0.80 mm sheet (22 Guage)
40
-
-
... More
Thickness 1.00 mm sheet (20 Guage)
10
-
-
... More
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc., as per specifications & instructions of EICs.
2
-
-
... More
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications & instructions of EICs.
2
-
-
... More
Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.
2
-
-
... More
Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.
2
-
-
... More
Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.
2
-
-
... More
Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class “O”) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications & instructions of EICs and as required.
-
-
-
... More
19 mm
290
-
-
... More
25 mm
10
-
-
... More
Supplying, Fixing, testing and commissioning of fire dampers of at least 1½ hour fire rating as per UL555/1995 tested. Actuator shall be UL listed complete as required and as per specifications & instructions of EICs.
-
-
-
... More
Fire damper(150 mm deep)
1
-
-
... More
Control Panel with actuator(10Nm Torque) & Wiring
1
-
-
... More
Supply, installation, testing & commissioning of thermal insulated flexible duct.Duct should be UL 181 CLASS I AIR DUCT LISTED AND LABELLED WITH NFPA 90A & 90B with double lamination of tough polyester which encapsulates steel helix wire forms the air tight inner core , double layer core wrapped in a multiple thickness of fiberglass wool with R Value 4.2 , Green guard certification of fiberglass wool must. , Reinforced and sheathed in a rugged and durable tridirectionally reinforced matlized polyester jacket.Strapping the flexible duct connections with flexible duct strap ties following sizes duly supported at regular interval as per site requirement etc. complete as required as per specifications & instructions of EICs. for the fresh air terminal conncction
-
-
-
... More
150mm dia
20
-
-
... More
100mm dia
10
-
-
... More
Louver
-
-
-
... More
Supplying, installing and testing of Fresh Air powder coated Anodized extruded aluminium construction fresh air louvers (50 mm deep) (Fresh air louver with VCD , bird screen & rattle-free)complete as per specifications & instructions of EIC.
1
-
-
... More
Supplying, installing and testing of Exhaust Air powder coated Anodized extruded aluminium construction fresh air louvers (50 mm deep) (Fresh air louver without VCD , bird screen & rattle-free)complete as per specifications & instructions of EIC.
3
-
-
... More
Supply, Installation, Testing and Balancing of Continious Linear Grilles with removable core as per approved drawings and specifications & instructions of EICs.
1
-
-
... More
Powder coated extruded aluminium construction.
10
-
-
... More
Supply, installation testing and commissioning of duct acoustic insulationInside the Duct with Engineered Nitrile Rubber open cell foam with Density 140 - 180 Kg/m3 passing Class 1 Fire Performance test as per BS 476 Part 7, Air Erosion test or 10,000 fpm air velocity as per ASTM C 1071-05 to be applied using manufacturer's recommended Rubber based Adhesive in a blend of solvents.
-
-
-
... More
10 mm thick duct acoustic lining
50
-
-
... More
Transmission & Control Wiring
-
-
-
... More
Providing & fixing of control cum trans-mission wiring of copper (communication cable) between indoor and out door unit in 25 mm PVC Conduit. AC Contractor shall include the cost of chiselling & finishing the wall / ceiling .
-
-
-
... More
2C x 1.5 Sq mm (Unarmoured)
540
-
-
... More
Commissioning of VRF systems including Nitrogen Flushing etc.
1
-
-
... More
SITC OF R410 Gas Charging Top Up
20
-
-
... More
Terminal Laminar Flow Modules For OT
-
-
-
... More
Ceiling Suspended Terminal Laminar Flow Modules for Operation Theaters complete with Casing in Aluminium / SS Construction, Minipleat HEPA Filters (H-13), SS Perforated Sheets at bottom, Integral DOP Testing arrangement from Clean Room Side, Suspension Arrangement, SS Pressure Plates & Hardware and Aluminium Diffusion Plate. Nominal Size : 2400 x 1800 x 480 mm (Ht) with pressure relife damper with necessary fittings etc. complete in all respect as per direction of EIC. Make - Spectrum/ AFF or equivalent
1
-
-
... More
DUCTING & ACCESSORIES for OT s
-
-
-
... More
Supply, erection, testing & commissioning of Al. Ducting fabricated at site, complete with turning vanes, collars, reducers as per IS - 655 (Class - VIII)
-
-
-
... More
24 G ( .8 MM )
40
-
-
... More
22 G ( 1.0 MM )
10
-
-
... More
P.H. WORK
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ground Floor-20mm dia C-PVC pipe (Ashirbad/Supreme)
75
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme)
90
-
-
... More
In 1st Floor-20mm dia C-PVC pipe (Ashirbad/Supreme)
70
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme)
90
-
-
... More
In 2nd Floor-20mm dia C-PVC pipe (Ashirbad/Supreme)
60
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme)
90
-
-
... More
Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/04 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ground Floor-25mm dia PVC ASTM Pipe
60
-
-
... More
50mm dia PVC ASTM Pipe
100
-
-
... More
In 1st Floor- 32mm dia PVC ASTM Pipe
80
-
-
... More
50mm dia PVC ASTM Pipe
20
-
-
... More
In 2nd Floor-40mm dia PVC ASTM Pipe
75
-
-
... More
50mm dia PVC ASTM Pipe
20
-
-
... More
In 3rd Floor-50mm dia PVC ASTM Pipe
100
-
-
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
-
-
-
... More
In Ground Floor
20
-
-
... More
In 1st Floor
18
-
-
... More
In 2nd Floor
15
-
-
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.
-
-
-
... More
In Ground Floor
10
-
-
... More
In 1st Floor
10
-
-
... More
In 2nd Floor
10
-
-
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in charge
-
-
-
... More
In Ground Floor
165
-
-
... More
In 1st Floor
160
-
-
... More
In 2nd Floor
150
-
-
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge
-
-
-
... More
250mm to 375mm thick wall
-
-
-
... More
In Ground Floor
25
-
-
... More
In 1st Floor
23
-
-
... More
In 2nd Floor
20
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge
-
-
-
... More
15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
15
-
-
... More
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
100
-
-
... More
20mm dia CP consealed stop cock(Con-CHR083KN Jaquar make)
15
-
-
... More
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
25
-
-
... More
15mm dia CP Health faucet (Con-ALD-CHR-573 Jaquar make)
25
-
-
... More
15mm dia CP extension piece
150
-
-
... More
15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make)
31
-
-
... More
Angle cock self closing system for urinal(As per Cat No.PRS-CHR-077 of Jaquar)
27
-
-
... More
125mm dia C.P.gratings.
95
-
-
... More
15mm C.P.revolving shower with 15mm x 225mm long CP shower arm.
3
-
-
... More
15mm CP spereader
27
-
-
... More
15mm dia CP Elbow action Bib cock(Jaquar)FLR-CHR-5047N
10
-
-
... More
25mm dia brass Fullway valve
30
-
-
... More
32mm dia brass Fullway valve
4
-
-
... More
40mm dia brass Fullway valve
8
-
-
... More
50mm dia brass Fullway valve
12
-
-
... More
25mm CPVC Ball valve
20
-
-
... More
Grab Bar Left 90˚ Angle white(Cera)No.82210104
3
-
-
... More
Grab Bar 692mm long white(Cera)No.82210106
3
-
-
... More
Grab Bar Vertical swing white(Cera)No.82210107.
3
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge
29
-
-
... More
110mm dia U-PVC SWR pipes(Supreme/Ashirvad)
385.71
-
-
... More
75mm dia U-PVC SWR pipes(Supreme/Ashirvad)
80
-
-
... More
110mm dia U-PVC 'P' trap
95
-
-
... More
110mm dia U-PVC Door Tee
90
-
-
... More
110mm dia U-PVC Plain Bend
40
-
-
... More
110mm U-PVC Door Cross Tee
15
-
-
... More
75mm dia U-PVC Door Bend.
40
-
-
... More
75mm dia U-PVC Plain Bend.
20
-
-
... More
75mm dia Nahin trap
15
-
-
... More
75mm dia Multi Floor Trap
15
-
-
... More
110x75mm dia Reducer
15
-
-
... More
110mm dia Vent cowl.
30
-
-
... More
W/C connector
20
-
-
... More
PVC Clamp suitable for 75mm to 110mm dia pipe
200
-
-
... More
Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan / Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Fixing 580mmx440mm size Orissa pan (Parryware/Hindware/Neycer/Rak)
16
-
-
... More
Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
E.W.C. with seat cover (Parryware/Hindware/Neycer/Rak)
13
-
-
... More
One piece closwet(Hindware)No.92099(S-30)Berlin
9
-
-
... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
550mm x 400mm size W. H. Basin with Half Pedestal (Parryware/Hindware/Somany)
13
-
-
... More
Under Counter basin(Hindware)No.10095.
23
-
-
... More
Half pedestal Basin(Hindware)No.91049+91115
8
-
-
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge
-
-
-
... More
Fixing 600mmx450mm size B.E mirror (fixed type)
13
-
-
... More
Design mirror(Parryware)
8
-
-
... More
Large size mirror with frame
-
-
-
... More
23x0.60x0.75=
10.35
-
-
... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
390mmx375mmx590mm size Flat back large standing urinal(As per Cat No.60002 of Hindware.
27
-
-
... More
Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Fixing of squatting urinal(Parryware/Hindware/ Somany)
6
-
-
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
600 x 125mm plate glass shelf with CP guard rails
13
-
-
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
25mm x 600mm long CP towel rail
35
-
-
... More
CP towel rail Ring.
30
-
-
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
CP soap holder
50
-
-
... More
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
600x450x250 mm Porceloain sink(Hindware/Neycer)
10
-
-
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
-
-
-
... More
Aquagurd Pure Chill 120 PSS UV
3
-
-
... More
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
-
-
-
... More
Gully trap chamber of size 250mmx250mm with R.C.C cover slab
18
-
-
... More
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Inspection chamber Inside size 760mmx760mmx460mm
15
-
-
... More
Supplying all materials, labour, T&P and providing ceramic vitrified matt finish tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc complete as per direction of the Engineer in charge. (vitrified tiles of size 60cmx60cm of make- Kajaria make Fog Parla or equivalent to be pre-approved by the Engineer in charge)
-
-
-
... More
In Ground Floor
106.94
-
-
... More
In 1st Floor
105.93
-
-
... More
In 2nd Floor
98.79
-
-
... More
Supplying all materials, labaour, T&P and fixing ceramic vitrified glazed tiles in dados skirting on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed ith pigments to match the shades of the tiles etc. complete as per direction of the Engineer-in-charge.(ceramic vitrified Glazed tiles in wall of size 60cmx30cm ) of make Kajaria make Durien marphil or equivalent to be pre-approved by the Engineer-in-charge.
-
-
-
... More
In Ground Floor
293.96
-
-
... More
In First Floor
283.17
-
-
... More
In Second Floor
260.57
-
-
... More
Supplying all materials, labour, T&P and providing cement flush pointing to brick masonry (1:3) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ground Floor
293.96
-
-
... More
In First Floor
283.17
-
-
... More
In Second Floor
260.57
-
-
... More
Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.
-
-
-
... More
In Ground Floor
60.01
-
-
... More
In First Floor
60.01
-
-
... More
In Second Floor
60.01
-
-
... More
Supplying all materials, labour, T&P and wall painting 2 coat with plastic emulsion paint of approved shade on old work to give an even shade etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ground Floor
60.01
-
-
... More
In First Floor
60.01
-
-
... More
In Second Floor
60.01
-
-
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer in charge.
-
-
-
... More
In Ground Floor
32.08
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ground Floor
10.69
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ground Floor
5.35
-
-
... More
In 1st Floor
10.59
-
-
... More
In 2nd Floor
9.88
-
-
... More
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make)
-
-
-
... More
In ground floor to third floor
66.15
-
-
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork with cement punning for skirting including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In First floor
148.88
-
-
... More
In Second floor
136.9
-
-
... More
Supplying the waterproofing material Pidifin 2K of Dr.fixit on equivalent water proofing material and appling in two coat over the concrete floor and dado upto 1"-6" in wall including cleaning,applying and mending as per specification including all labour charges as per direction of Engineer-in-charge.
-
-
-
... More
In First floor
148.88
-
-
... More
In Second floor
136.9
-
-
... More
Supplying all materials, labour, T&P and filling in sunken floor in toilets with cinter (light weight slag) well watered and rammed include conveyance of all materials to worksite payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In First floor
31.78
-
-
... More
In Second floor
29.64
-
-
... More
Supplying all materials, labour, T&P and fixing granite tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge
-
-
-
... More
In ground floor
31.95
-
-
... More
In First floor
33.3
-
-
... More
In Second floor
33.3
-
-
... More
Supplying all materials, labour, T&P and fixing Kodappa tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge
-
-
-
... More
In ground floor
9.45
-
-
... More
In first floor
10.8
-
-
... More
In second floor
10.8
-
-
... More
Construction of RCC Over head Tank of Inside size- 6.40 X 3.70 X1.50m- In Third floor.(30 KLD)
-
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
19.88
-
-
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
19.88
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.
-
-
-
... More
RCC floor roof, chajja etc
53.47
-
-
... More
RCC Beam, Column, wall etc
104.73
-
-
... More
Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
62.56
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
62.56
-
-
... More
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and lalustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
80
-
-
... More
Providing fitting and fixing MS cover made out of MS angle and sheet duly welding and fixing with frame and hinges along with locking arrangement of size 60cmx60cm etc complete as per direction of Engineer-in-charge
60
-
-
... More
External PH Works
-
-
-
... More
Construction of 6.75mx3.60m x 1.40m(h) Rain water Recharge Pit- 2 Nos.
-
-
-
... More
Sinking of tube well through D.T.H.Rig.
-
-
-
... More
200mm dia- 0.0m to 30.00m
50
-
-
... More
Lowering of PVC casing pipe inside bore.
-
-
-
... More
200mm dia- 0.0m to 30.00m
50
-
-
... More
Cost.of 200mm dia (Sch.80)Pipe
50
-
-
... More
Cutting slot in casing pipe for recharge of rain water
50
-
-
... More
Labour for packing gravel outside the tube well
-
-
-
... More
2x25.0mx22/28{(0.40)²-(0.20)²}=4.70
4.7
-
-
... More
Cost of washed gravel.
4.7
-
-
... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
120
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2.16
-
-
... More
Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
22.8
-
-
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
182.4
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
97.2
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
6.26
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
0.5
-
-
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.5
-
-
... More
Providing and filling filter media
-
-
-
... More
40mm size bolder-2x6.0x2.50x0.85=25.5
25.5
-
-
... More
20mm size washed gravel-2x6.0x2.50x0.40=12
12
-
-
... More
Course sand-2x6.0x2.50x0.30=9.00
9
-
-
... More
Providing fitting and fixing M.S.grill,Jalli cover over the harvesty pindi
4
-
-
... More
Supplying all materials, labour, T&P and constructing surface drain of size A-4 type with cement concrete (1:3:6) using 12mm size h.g chips on bed, 1st class Fly ash brickwork in cement mortar (1:3) inside, 12mm thick cement plaster (1:3) finished smooth with cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
100
-
-
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
-
-
-
... More
110mm dia u-pvc pipe alround concrete
50
-
-
... More
160mm dia u-pvc pipe alround concrete
60
-
-
... More
200mm dia u-pvc pipe alround concrete
40
-
-
... More
Supplying all materials, labour, T&P and constructing circular type man hole chamber of the following size with cement concrete (1:4:8) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar (1:5), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, 12mm thick cement plaster (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Circular MH inside dia 1200mmx1670mm with sides sloped upto560mm
3
-
-
... More
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Man hole chamber Inside size 910mmx910mmx910mm
8
-
-
... More
Cost of R.C.P.C.Cover.
13
-
-
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class Fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Brick masonry soakway pit 1.40m dia x 2.00m deep
2
-
-
... More
Sinking of 200mmx 150mm dia Tube well through DTH Rig-2 Nos.
-
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
... More
Drilling of 200mm dia bore
-
-
-
... More
0mtr to 50mtr
50
-
-
... More
46mtr to 120mtr
60
-
-
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
... More
Lowering of 200mm dia GI/P.V.C/MS casing pipes
-
-
-
... More
0 mtr to 50 mtrs
50
-
-
... More
Cost of 200mm dia P.V.C schedule-80 pipe
60.6
-
-
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
... More
By DTH/Rotary Rig
1
-
-
... More
Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department).
-
-
-
... More
Sanitary sealing upto 5mtrs below ground level.
1
-
-
... More
CC(1:2:4)with 12mm chips for grouting upto 5 mtr.Depth in sanitary sealing.
0.16
-
-
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.
-
-
-
... More
40mm dia brass or gun metal Non-return valve
1
-
-
... More
Construction of 100000 Liters RCC Under ground Reserver of Inside size- 10.00x5.50x2.10m
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
-
-
-
... More
UGR - 1x11.70x7.20x1.50=
126.36
-
-
... More
-do- with Ist disintegrated rockadditional depth of 1.50 m over the initial lead and lift
-
-
-
... More
UGR - 1x11.70x7.20x1.20=
101.09
-
-
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
-
-
-
... More
UGR - 1x11.70x7.20x0.30=
25.27
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
UGR - 1x10.90x6.40x0.20=
13.95
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
53.92
-
-
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
53.92
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.
-
-
-
... More
RCC floor roof, chajja etc
61.6
-
-
... More
RCC Beam, Column, wall etc
165.75
-
-
... More
RCC Plinth bend/ Raft
27.68
-
-
... More
Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
139.9
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
139.9
-
-
... More
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and lalustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
80
-
-
... More
Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge(18" round man hole cover)
2
-
-
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
For Sump
-
-
-
... More
1 H.P three phase 15 stage head range 20 to 35 metres, discharge 145 to 110 L.M.P with outlet dia of 25mm (Horizontal)
2
-
-
... More
DOL Control panel
2
-
-
... More
2.50sqmm flat cable
100
-
-
... More
For Production well.
-
-
-
... More
2 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.P.M with outlet dia of 32mm
2
-
-
... More
DOL controll pannel
2
-
-
... More
2.50sqmm cable
150
-
-
... More
32mm dia steel short piece
2
-
-
... More
Steel rope with cover
75
-
-
... More
Well cap
1
-
-
... More
50mm size CI bracket
2
-
-
... More
20mm dia rigid UPVC pipes
80
-
-
... More
EXTERNAL WORKS
-
-
-
... More
Construction 1 nos 100 users RCC Septic tank-2 Nos.
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
118.8
-
-
... More
-do- with Ist disintegrated rockadditional depth of 1.50 m over the initial lead and lift
75.24
-
-
... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
-
-
-
... More
In ground floor
11.88
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
-
-
-
... More
In ground floor
11.88
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
... More
In ground floor
6.94
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
55.74
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
For Roof slab
74.3
-
-
... More
For RCC wall
256.8
-
-
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
44.6
-
-
... More
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
167.64
-
-
... More
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
4
-
-
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
20
-
-
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
21.6
-
-
... More
PUMP HOUSE
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
65.84
-
-
... More
-do- with Ist disintegrated rockadditional depth of 1.50 m over the initial lead and lift
-
-
-
... More
Base slab-1x11.40x3.85x0.85=
37.31
-
-
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer in charge.
5.75
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
3.83
-
-
... More
Disposal of surplus excavated materials by mkechanical means from the work side etc.complete upto 5 Km.lead.
65.84
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
25.1
-
-
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
16.64
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Base raft
55.11
-
-
... More
RCC Wall.
61.56
-
-
... More
RCC Lintel-
0.54
-
-
... More
Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Superstructure-
8.4
-
-
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
66.77
-
-
... More
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry tratment including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
99.3
-
-
... More
Supplying all materials, labour, T&P and providing priming 1 coat with any approved primer all complete as per specification and direction of the Engineer in charge
36.8
-
-
... More
Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.
120.72
-
-
... More
Supplying all materials, labour, T&P and wall painting 2 coat with plastic emulsion paint of approved shade on old work to give an even shade etc all complete as per specification and direction of the Engineer in charge
120.72
-
-
... More
Supplying all materials, labour, T&P and providing painting 2 coat with any weather coat on new wood work all complete as per specification and direction of the Engineer in charge
36.8
-
-
... More
Supplying and fixing of M.S.window grill made out of MS flat conforming to IS:2062/2006 painted with Red oide primer as per the design approve by EIC including cost,conveyance of all materials and labour for fitting fixing etc.all complete as per the direction of the Engineer-in-charge.
436.4
-
-
... More
Supplying all materials, labour, T&P and providing painting 2 coat with any approved synthetic endamel paint to new wood & iron work all complete as per specification and direction of the Engineer in charge
3.94
-
-
... More
Supplying all materials, labour,T&P and providing 25mm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips on new work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
30
-
-
... More
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and lalustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
81.2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements