Rural Development Department Tender

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 & as per direction of EIC

Providing, laying semi dense bituminious concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with specified grading, premixed with bituminious binder of 60/70 penetration grade of bitumen.

Finishing walls with water proofing cement paint of approved shade on new work two coat to give an even shade exculding cost of paint including all cost of cement paint etc, Complete.

Reinforced cement concrete (1:2:4) grade kilometre stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD technical Specification Clause 1703 as per direction of the Engineer in charge Ordinary KM Stone

Reinforced cement concrete (1:2:4) grade kilometre stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD technical Specification Clause 1703 as per direction of the Engineer in charge Ordinary 200 mtr stone

Reinforced cement concrete (1:2:4) grade kilometre stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD technical Specification Clause 1703 as per direction of the Engineer in charge. PMGSY Citizen Board

Reinforced cement concrete (1:2:4) grade kilometre stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD technical Specification Clause 1703 as per direction of the Engineer in charge. PMGSY Citizen & Place Identification Board

Reinforced cement concrete (1:2:4) grade kilometre stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD technical Specification Clause 1703 as per direction of the Engineer in charge. PMGSY cautionary board

Reinforced cement concrete (1:2:4) grade kilometre stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD technical Specification Clause 1703 as per direction of the Engineer in charge. PMGSY Logo board

Reinforced cement concrete (1:2:4) grade kilometre stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD technical Specification Clause 1703 as per direction of the Engineer in charge. Boundary Piller

Construction of embankment with approved material obtained from borrow pits with all lifts and lead,transporting to site by mechanical means within a lead of 5 km,spreading,grading to required slope and compacting to meet requirements.

Earthwork in excavation in hard soil as per drawing and technical specification Clause 305 and 1104 of MoRD includding setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto all lead & lift, dressing of sides and bottom and back filling with excavated suitable material upto 3mt. as per direction of Engineer-in-Charge.

Filling mannyaly sand in foudnation Protection wall

Plain Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.broken metal including cost, conveyance, royality etc.,

Road marking with hot Applied thermoplastic compound with Reflectorising Glass beads on bituminous surface providing and applying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @250 gms per Sqm area,thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35.The finished surface to be leveled,uniform and free from streakers and holes

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause Annexure 300,800,1700 of MORD as per direction of the Engineer in charge