Rural Development Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 3,21,780Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CERWI_102967_4Bid Award Id
ViewTender No
CCE-BLS-NCB-89 OF 2023-24Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing filling foundation and plinth with sand well watered and rammed with rammer including cost of all materials and labour etc. all complete as per the direction of Engineer in Charge.
1906.75
2755253
1445
Providing and laying Plain cement concrete (1:3:6) grade mix using portland slag cement in foundation and botton layers of flooring and below pile cap etc using 40mm size downgraded hard crusher broken granite aggregates etc. all complete as per the direction of Engineer in Charge..
301.96
2032205
6730.05
Providing, lifting, hoisting and laying PCC M20 grade mix using portland slag cement as per IS: 456 2000 in Foundation & Toe wall as per the drawing with 20mm hard crusher broken granite aggregates etc. all complete as per the direction of Engineer in Charge..
31.59
237633
7522.42
Providing, lifting, hoisting and laying reinforced cement concrete of M30 grade mix to including centering and shuttering using 20mm down graded crusher broken HG chips including watering curing with all cost, carriage, labour, royalty, T&P etc complete.
-
-
-
Foundation (Pile Caps & Grade Beams)
157.2
1251928
7963.92
Ground Floor
138.9
1106188
7963.92
First Floor
64.66
520985
8057.3
Second Floor
20.01
163375
8164.7
Providing & fixing in position High yield deformed bars / reinforcement confirming to Fe 500 grade of SAIL make with cutting, bending, binding, straightening, tying and placing in position, using binding wire 18 to 20 gauge, cost & conveyance of materials,labour, T &P etc. complete as per direction of the Engineer-in-charge.(Ground Floor)
1161.27
11014576
9484.94
Providing strong rigid and levelled Centering & Shuttering to required shape and size for all kinds of RCC works mentioned in different items with steel centering and shuttering materials with all necessary bracing ties and supports with level centering covered with bituminous paper including provision of necessary holes and pockets electrical conduit pipe, PH pipes, Fan hooks or boxes, switch and board insert plates, clamps and extension bars etc. as per the direction of the Engineer - in - charge and dismantling and removing after the required interval from thedate of casting, including cost of all materials with transportation, taxes, loading and unloading etc and all labour, sundries, T&P scaffolding etc complete as per approved specification.
-
-
-
Foundation (Pile Cap & Grade Beam)
483.92
113111
233.74
Ground Floor
-
-
-
Columns & Beams
260
266866
1026.41
Roof Slab
140
89266
637.62
Staircase
30
27168
905.63
Lintel, Chajja, Ramp & Parapet Railing
285.67
152250
532.96
First Floor
-
-
-
Columns & Beams
204.85
252311
1231.69
Roof Slab
167.33
128030
765.14
Staircase
25
27169
1086.76
Lintel, Chajja, Ramp & Parapet Railing
90
57560
639.56
Second Floor
-
-
-
Columns & Beams
40
59121
1478.03
Roof Slab
65
59681
918.17
Lintel & Chajja
140
107445
767.47
Providing Fly ash brick masonary in C.M.(1:6) with fly ash brick of approved quality and size including racking out joints, splays, cutting, circular moulding with cost & conveyance of materials, labour ,T&P, royalty, taxes, curing etc. complete as per direction of the Engineer-in-charge. (In Foundation)
-
-
-
Foundation & Plinth
33.6
186635
5554.63
Ground Floor
11.72
65490
5587.96
First Floor
85.5
499554
5842.74
Second Floor
10.29
63136
6135.74
Providing Fly ash brick masonary in C.M.(1:4) with fly ash brick of approved quality and size including racking out joints, splays, cutting, circular moulding with cost & conveyance of materials, labour ,T&P, royalty, taxes, curing etc. complete as per direction of the Engineer-in-charge. (In Foundation)
-
-
-
First Floor
8.47
51526
6083.39
Providing average 25mm thick grading concrete (1:2:2) with portland slag cement (PSC) using 2% water proofing cement compound over 2 coats of polymer paint.
-
-
-
First Floor
277.31
137346
495.28
Providing 12mm thick cement plaster with cement mortar (1:4) using portland slag cement (PSC) to outside surface.
-
-
-
Ground Floor
185.87
33138
178.29
First Floor
657
120592
183.55
Second Floor
51.03
9648
189.07
Providing 16mm thick cement plaster on the rough side of brick masonry wall with cement mortar (1:6) using portland slag cement (PSC) including racking out joints upto a depth of 12mm.
-
-
-
Ground Floor
50
11641
232.83
First Floor
378.37
89878
237.54
Second Floor
45.01
10909
242.38
Providing 6mm thick cement plaster with cement mortar (1:4) using portland slag cement (PSC) over a coat of cement wash to ceiling of roof slabs, stair, landings, chajja, shelf and lofts etc.
-
-
-
Ground Floor
585.56
103895
177.43
First Floor
460.17
83345
181.12
Second Floor
170.25
31482
184.92
Supplying, fitting and fixing 100mm dia PVC rain water down pipe of medium duty including PVC bend, shoe, fixing with clamp, cutting holes in parapet making good to the damages in CC (1:2:4) with portland slag cement (PSC).
80
58444
730.55
Finishing wall suface of walls with Acrylic wall putty (Water based) of approved make and finshed smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes. Labour T & P etc complete.
-
-
-
Ground Floor
675.09
50336
74.56
First Floor
838.54
63595
75.84
Second Floor
61.82
4767
77.12
Painting over interior plastered surfaces with 2 coats of Plastic emulsion paint of approved quality and shade using the required quantity of paint over 1 coat of primer.
-
-
-
Ground Floor
675.09
60171
89.13
First Floor
838.54
76001
90.64
Second Floor
61.82
5696
92.14
Painting over exterior plastered surfaces with 2 coats of synthetic weather coat paint of approved quality and shade using the required quantity of paint over 1 coat of primer.
-
-
-
Ground Floor
62.54
4696
75.1
First Floor
378.37
28840
76.22
Second Floor
204.48
15817
77.35
Providing and Painting wall Surface one coat with wall Primer to give an even shed before applying paint to walls including cost of Primer , labour, T&P all comp.
-
-
-
Ground Floor
737.63
49292
66.83
First Floor
1216.91
84142
69.14
Second Floor
266.3
19033
71.48
Supplying, fitting & fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame shutters, and all fittings and fixtures etc. complete ref. A/R-2022-p-236 item-13
32.76
284426
8682.12
Factory made GIRID FRP or called GRP sandwich composite door shutter of 32mm thick laminated with two GRP skin with good grain finish fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shall not be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shall conform to RV -TIFAC components design centre's standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specification and direction of the Engineer in Charge. etc. complete
25.2
108916
4322.1
Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete
79.2
49595
626.2
Supplying, fitting & Fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame shutters and all fiting and fixtures.ref. A/R-2022-p-236 item-12
29.45
146100
4960.97
Supplying & fixing of MSWI clamps of 6mm x 25mm x 230mm size including cutting holes in walls etc.complete as per specification and direction of Engineer-in-charge.
120
8362
69.69
Fabricating & fixing of MS Grill (structural steel) for main entrance in the staircase with 40mm x 40mm x 6mm angle frame with double leaf and 10mm square bars forming a square mesh including cost of all material, cost of welding rod with all labour etc. complete.
160
23155
144.72
Two coats of Painting with one coat of primer with approved quality and shade of paint conforming to IS on Steel and Wood Work.
134.57
29299
217.73
Kota stone flooring with minimum 16mm thick kota stone dressed and polished bottom coated with cement slurry and fixing in flooring on 25mm thick bed of cement mortar (1:1) mix and joints filled with grey cement slurry etc complete in all respect as per Technical Specification.
-
-
-
Ground Floor
275
349967
1272.61
First Floor
180
232057
1289.21
Kota tile in dados with minimum 16mm thick kota stone dressed and polished bottom coated with cement slurry and fixing in dados on 12mm thick bed of cement mortar (1:3) mix and joints filled with grey cement slurry etc complete in all respect as per Technical Specification.
-
-
-
Ground Floor
17.2
23714
1378.75
First Floor
42.32
59179
1398.37
Fixing wall tile in dados with minimum 16mm thick kota stone dressed and polished bottom coated with cement slurry and fixing in dados on 12mm thick bed of cement mortar (1:3) mix and joints filled with grey cement slurry etc complete in all respect as per Technical Specification.
180
235828
1310.16
Fixing tiles in ceramic Floor on 25mm thick bed of Cement mortar 1:1 jointed with neat white cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles as per direction of Engineer - in - charge.
52.5
64816
1234.6
Making Grooves of 3mm deep & 10mm wide on plastered surface at all joints of concrete & Brick Masonry.
756.35
8785
11.62
Cement concrete block pitching with CC M20 of 100mm thick of required size as approved by the Engineer - in - charge in slope and approns.
400
322084
805.21
Providing Black board of size 2.0m x 1.5m over brick walls with 20mm thick CP in (1:4).
4
18584
4646
Fixing a Marble Plaque of size 5' x 2.5' x 1" with engraving informations for users as per direction of the Engineer - in - charge.
1
5807
5807.5
Conducting pile load testing on working piles
2
81305
40652.5
Supplying, fitting & fixing of 40mm dia stainless steel pipe in the handrail of ramp in the walls of toilet for sick personnel including cost of materials, labour and taxes etc complete.
18
84552
4697.35
Providing and fixing Chequrred tiles in floors, treads or steps and landing on 25 mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles complete including cost of tiles as directed by the Engineer-in-charge.
145.44
107203
737.1
Clearing & grubbing road land in area of light jungle including uprooting rank vegetation, grass, bushes, shurbs etc. Including disposal etc. complete as per direction of the Engineer-in-charge.
1250
8054
6.44
Providing NCRMP Logo sign Board etc. complete as per direction of the Engineer-in-charge.
1
10000
10000
Construction of un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M-30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction, expansion and construction joints, applying sealant, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification as per direction of the Engineer-in-Charge.
81
609316
7522.42
Construction of embankment in hard soil with carriage by mechanical means including consolidation with H.R.R. etc. complete to shape as per direction of Engineer-in-charge.
2562
602110
235.02
PH
-
-
-
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor P.V.C pipes conforming to ASTM-F-441(Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C.- 20mm dia C-P.V.C. pipe [Internal]
55
15323
278.6
25mm dia C-P.V.C. pipe [Internal]
70
26607
380.1
32mm dia C-P.V.C. Pipe[External]
35
18056
515.9
40mm dia C-P.V.C. pipe[External]
45
30784
684.1
supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for takingwater supply pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of E.I.C.-- 250mm thick walls
15
846
56.4
supplying all materials, labour, T&P and cutting holes in R.C.C walls, Floors, roofs for taking water supply pipes and fittings including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C.
2
393
196.9
Supplying all materials,labour,T&P and cutting grooves in pucca floors and walls for taking G.I./ P.V.C pipes and making good the damages all complete as per specification and the direction of the E.I.C.
60
12678
211.3
Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C.- 15mm dia. C.P Bibcock (Short body) with C.P Flange [Jaquar]
12
14565
1213.8
15mm dia. C.P Bibcock (long body) with C.P Flange [Jaquar]
4
6430
1607.5
15mm dia.C.P angle stopcock with C.P Flange [Jaquar]
21
21707
1033.7
20mm dia.C.P concealed stopcock with C.P Flange [Jaquar]
7
13092
1870.4
15mm dia C.P pillarcock [Jaquar]
5
6849
1369.9
15mm dia C.P. Two Way Bib Cock with C.P Flange [Jaquar]
1
1386
1386
15mm dia C.P. Health Faucet [Jaquar]
1
1361
1361.4
15mm dia C.P Extension piece.
38
2910
76.6
25mm dia.PVC ball valve [Metal Ball]
4
3177
794.4
32mm dia.PVC ball valve[Metal Ball]
2
3272
1636.2
40mm dia.PVC ball valve[Metal Ball]
3
6309
2103.1
Supplying all materials, labour T&P and fitting and fixing of C.P Shower with 15mm or 20mm inlet with C.P Shower arm including polishing etc all complete as per specification and direction of the E.I.C- 15mm dia.C.P revolving shower
4
2757
689.4
Supplying all materials, labour, T&P and fitting and fixing SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches with earth work including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. -- 110mm dia SWR pipe
65
24895
383
75mm dia SWR pipe
15
3463
230.9
110mm dia SWR P trap
12
4573
381.1
110mm dia SWR door Tee
8
2828
353.6
110mm dia SWR plain Tee
12
3795
316.3
110mm dia. SWR Door bend
12
3013
251.1
110mmdia. SWR Plain/Shoe bend
38
7888
207.6
110mm dia. SWR Cross door Tee
1
423
423.6
110mm dia. SWR Offset.
18
6332
351.8
110 mm dia. SWR Cowl
5
424
84.9
125mm dia. C.P. Grating
15
1296
86.4
75mmdia.SWR Plain tee
12
2112
176
75mm dia. SWR Door bend
3
432
144
75mmdia. SWR Plain/Shoe bend
16
1833
114.6
50mm dia SWR pipe
3
336
112.2
50mm dia. SWR Plain bend
4
137
34.3
supplying all materials, labour, T&P and cutting holes throughbrick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.Necessary Jointing Materials fixing to coloums , wall wih Pipe clip and/ or Iron clamps , nails at internvals of 750mm or part thereof all complete.-- 250mm to 375mm thick wall
17
3481
204.8
supplying all materials, labour, T&P and cutting holes through R.C.C wall, floors, roof for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.
6
1020
170.1
Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal etc all complete as per specification and direction of the E.I.C.- 580mm Orissa pan(Neycer/Cerra/ Parry ware/ Hindware)
12
38334
3194.5
Supplying all materials, labour T&P and fixing Wash Down Water Closet(European type W.C. pan) with Integral ‘S’ or ‘P’ trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.C-- E.W.C. with ‘S’ trap Plain(Neycer/Cerra/ Parry ware/ Hindware)
1
2745
2745.5
Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Cerra/Parry ware/ Hindware)
1
771
771.3
Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C(Neycer/ Cerra/Parry ware/ Hindware)
13
24623
1894.1
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I. or M.S.brackets painted white, with 32 mm dia CP waste, 32mm dia PVC waste pipe, including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, etc all complete as per specification and direction of the E.I.C.- 550mm x 400mm WHB with all Fittings with C.P. Waste, PVC Waste Pipe & Connection Pipe. (Neycer/Cerra/ Parry ware/ Hindware)
5
15815
3163
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C.- 600mmx400mm B.E Mirror (fixed type)
5
4118
823.7
Supplying all materials,labour, T&P and fixing standard sized CP towel rail/ring, coat hook complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C- CP Towel Rail with hook.
4
4122
1030.7
CP towel ring
5
2734
546.8
Providing and fixing Stainless Steel Horozontal /Vertical Grab Bar 600mm length fixed to PVC Cleats with C.P. brass Screws wherever required with approved make & quality and as per the direction and to the satisfaction of Engineer-in-charge.
2
6830
3415
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C
17
5433
319.6
Supplying all materials, labour T&P and fixing bowl pattern urinal including the connecting the urinal with waste pipe by means of white lead list with chopped hemp etc. all complete as per direction of E.I.C.-- Flat back lipped wall urinal (standing Urinal) including 32mm dia PVC Waste Pipe with brass coupling nut & 15mm dia PVC inlet connection Pipe [Neycer/CerraParrywear/Hindware]
3
6949
2316.4
Supplying all materials,labour, T&P and fixing glazed earthen ware Squatting plate size 450x350 mm with integral longitudinal flushing pipe including embedding the plate in 25mm thick cement mortar (1:8) laid over PCC (1:5:10) using 40 mm size metal etc all complete as per specification and direction of the E.I.C. 450 x 350 mm Squatting Urinal (Ladies) [Neycer/Cerra/Parrywear /Hindware]
4
11348
2837
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C.[First Floor]
123.49
116844
946.2
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C.[First Floor]
36.19
35490
980.7
Supplying all materials, labour T&P and fixing Marble partition wall for Urinal with cutting grooves on walls and making good the damages including rubbing and polishing complete as per specification and direction of E.I.C. (1st Floor)
2.16
2952
1367.1
Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/ Champagne/ Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C
79.45
49751
626.2
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
21.83
94174
4313.4
Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. - Initial lift up to 1.50m[100 User]
48.42
11050
228.21
From 1.50m to 3.00m depth
48.42
11861
244.97
Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.[100 user S.T]
4.84
4990
1030.7
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.-- .[100 user S.T]
3.23
19954
6175.8
Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.- .[100 user S.T]
6.92
58085
8398.7
Supplying all materials,labour, T&P and providing Brick work with Fly Ash Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.- In F&P in c.m(1:3) (st-100)
32
183712
5741
In Super structure in c.m(1:4)
0.25
1384
5537
Supplying all materials, labour, T&P and providing reinforced cement concrete (1:1.5:3) with 12mm size H.G chips for R.C.Cworks including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.-- Ground Floor
2.7
22642
8398.7
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.-- Ground Floor
14.77
9995
676.9
Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.- Ground Floor
2.5
23174
9269.7
Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.- 20mm thick C.P (1:3) G.Floor
58.77
16643
283.2
12 mm thick C.P in C:M (1:3)
7.59
1421
187.3
Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.Ground Floor
58.77
2056
35
Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.Ground Floor
65.55
10566
161.2
Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.
22.87
2928
128.05
Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.Ground Floor
2.16
2200
1018.8
Supplying all materials, labour, T&P and providing & fixing P.V.C Tee in wall including filling the necessary with P.C.C(1:2:4) using 12mm size HG chips all complete including watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per direction of the E.I.C.- 16O mmXI 60mm X160mm PVC Tee
2
1772
886.3
Supplying all materials, labour, T&P and making M.S. Step Iron in 20mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.
14
3922
280.2
Supplying all materials, labour, T&P and providing pre-cast R.C.C. manhole cover with C.C (1:1.5:3) of 12mm size chips including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.- (size- 550mmx550mmx76omm
2
736
368.1
Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:1.5:3) mix using 12 mm size H.G chips, foundation concrete (1:3:6) using 40 mm size HG metal on bed and around trap , !st class Fly Ash Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap & C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.- Inside size 250mmx250mm Gully Trap Chamber
5
10722
2144.5
Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C- Inside size 750mmx750mm x450mm Inspection Chamber
4
40346
10086.6
Addle.depth
5
5572
1114.5
Supplying all materials, labour, T&P and constructing Manhole Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C- Inside size 900mmx900mmx900mm Manhole Chamber
1
18925
18925.6
Addle.depth of 0.15 Mtr.
1
1344
1344.95
Supplying all materials, labour, T&P and constructing soakway pit of the following size with pre cast R.C.C rings joined loose , gravel backing in the rear of well stening , pre cast R.C.C cover Slabs in C.C (1:2:4) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.- 0.90mdia.x 2.10m deep RCC Ring Soak Pit.
2
12343
6171.5
1.20mdia.x 2.10m deep RCC Ring Soak Pit
1
8138
8138.2
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class Fly Ash brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.- 1.80mdia.x 2.00m deep Soak Way Pit
1
29792
29792.9
Supplying all materials, labour, T&P and laying of SWR (Type-B) soil waste pipes of the following internal diameter conforming to I.S.No-13592/1992 in trenches of the depth upto 1.20 mtr including jointing with supply of approved rubber lubricant by non-heat application method on bedding with 150mm thick C:C (1:3:6) using h.g metal of 25 mm to 40 mm and then making allround encasing including earthwork in excavation in all kinds of soil with refilling of trenches watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per direction of the E.I.C.- 110mm dia.with Allround concrete encasing.
30
48822
1627.4
160mm dia.with Allround concrete encasing.
10
25654
2565.4
Sinking of 125x50mm Tubewell through Hand Boring Method- Supplying all materials, labour, T&P and setting up boring equipments including irrection of suitable stagging for installation of the required size of tube-well. Dismantling & removing the same after completion of the work including transportation of boring equipments clearing & leveling the site, excavation of mud pit channels etc., leveling of site all complete as per direction of E.I.C(Labour) including cost of transportation of materials etc. complete.
1
10692
10692.76
Supplying all labour, T&P & transportation of boring pipes, top casing, grouping pipes, PVC pipes and fitting, PVC well screens, cement, betonite etc. including loading and unloading etc. complete as per direction of the E.I.C.(Labour)
1
457
457.5
Supplying all labour, T&P and drilling pilot bore not less than 102mm dia without casing pipes in all kinds of soil and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments extra sockets etc.and withdrawing the boring pipes washing & keeping the bore clear for logging if required all complete as per the direction of EIC-- Pilot bore 100mm dia (00 mtr. to 360 mtr.)
200
173852
869.26
Supplying all required laboyur for logging the bore through departmental team (till logging team arrives at the site, the contractor is to keep the bore intact by cirulating mud through the mud circulating system) and when the logging team arrives at the site, the contractor will withdraw the boring pipe with cutter etc. and keep the bore suitable for logging and supply required labour to carry out the logging operation.
1
6857
6857.5
Supplying all labour, T&P & reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc. all complete as per direction of E.I.C. -100 mm ot 150 mm dia( 00 mtr to 360 mtr)
140
16000
114.29
150 mm to 200 mm dia( 00 mtr to 360 mtr)
140
16000
114.29
200 mm to 250 mm dia( 00 mtr to 360 mtr)
50
5714
114.29
Supplying all labour, Tools and plant and lowering the 300mm dia top casing pipe into position and removing the same after use as per the direction of Engineer-in-charge.
1
757
757.9
Supplying all labour, T&P and jointing materials and lowering the PVC casing pipes fitting and well screens in position including fitting of centralizer cutter plugs and washing the bore as per the direction of E.I.C.(Including cost of Materials) 125 mm dia PVC Pipe (Schedule-80)
51
39642
777.3
50 mm dia PVC Pipe (Schedule-80)
140
26406
188.62
50 mm dia PVC strainer
10
4313
431.37
125x50 mm dia PVC R/S
1
244
244
50 mm dia C.I.Plug Cutter
1
114
114
Lowering of 125/100mm dia PVC Pipe
50
1930
38.61
Lowering of 50mm dia PVC Pipe
150
4182
27.88
Rubber Packer
1
523
523
Supplying all labour, T &P and grouting with cement betonite slurry for saline sealing in the bore over the Rubber Packer etc. all complete as per the direction of Engineer-in-charge ( Exxcluding cost of Cement .)
1
4692
4692.5
Cost of Cement for Saline Sealing including transportation
5
3595
719.06
Supplying all labour, T&P materials and providing sanitary sealing by cement slurry grouting around the uppermost 3.00 mtrs. of 125 mm dia PVC casing pipe . including cost of cement all complete as per direction of E.I.C (including cost of 2 bags of Cement)
1
1334
1334.7
Cleaning the developing the tube well using compressor continuously to get clear and adequate discharge from the tube well including the supply and use of all necessary equipment and labour as per direction of E.I.C(Labour Charges)
1
1557
1557.57
Supplying all labour, T&P, materials & Providing Annabond-666 at the thread of the pipe to avoid saline leakage as per direction of Engineer-in-Charge.
6
1794
299
Supplying of ISI Mark 1.50 HP Single Phase Vertical Submersible Pump Set with Discharge of 2300-3000 liter/hour and a head of 45-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charage.
1
19916
19916
Supplying all labour, T&P and fitting and fixing of 1.50 HP Single phase vertical Submersible Pump Set with commissioning and testing, Electrification etc. all complete as per direction of EIC
1
2000
2000
Supplying and fitting and fixing of ISI Mark DOL Starter of reputed make like BCH or Equivalent for 1.50 HP Single Phase Submersible Pump including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charge.
1
3500
3500
Supplying and fitting and fixing of three core flat cable (2.5mm2) of ISI Make of reputed company line BCH/Finolex or Equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charge.
55
7045
128.1
Supplying and fitting & fixing of Plastic rope, M.S. Well Cover, M.S. Clamp, Stainless Steel Short piece, Bend & Socket including all const, conveyance and taxes etc. all complete as per direction of engineer-in-charge.
1
1660
1660
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC Pipes conforming to ASTM-D-1785/89(sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C- 32mm dia HDPE Pipe [Inside Tw]
40
3164
79.1
32mm dia HDPE Pipe [External Including Earth Work]
13.9
1774
127.68
EI
-
-
-
Wiring
-
-
-
Recessed wiring to Light point/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front Bakelite cover of suitable size,MS box with 1.0 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of S/F 100 mm x 100 mm x 60 mm M.S. Box with backlite cover-1 No.)Group A 1.2.1-1.24.2
-
-
-
-do- Group A
21
6425
305.97
-do- Group B
36
19729
548.05
-do- Group C
63
53719
852.69
Recessed wiring to Fan Point in...
-
-
-
-do- Group B
11
6028
548.05
-do- Group C
10
8526
852.69
Recessed wiring to Exhaust Fan Point in…..
-
-
-
-do- Group C
13
11084
852.69
S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.
21
5511
262.43
S/F of Angle holder replacing Ceilling Rose
48
849
17.7
Swich Boards
-
-
-
S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board
11
1014
92.2
S/Fof metal box of 150 mm x 75mm x 60mmdeep (Nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amp. Socket out let 5/6amp. Piano type switch,connection,painting etc. as required (1.26)
6
1292
215.49
S/F of metal box of 180mm x 100mmx60mm deep (Nonunal size) in recess with suitable size of Phenolic laminated sheet cover in front including providing and fixing 3 pin 15/16 amp. Socket out let 15/16 amp. Piano type switch,connection, painting etc. as required(1.27)
2
573
286.53
S/F of 1 no of 3 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in (180mmx100mmx60mm)deep M.S box with B.K cover with connection, painting etc as required for Inverter connection
1
610
610.59
S/F to 16/18 SWG metal box of following sizes (normal sixe) in recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
..do- 200mmX150mmX60mm deep (1.24.7)
2
365
182.66
-do-200mmx250mmx75mm deep(1.24.9)
12
2689
224.11
-do-250mmx300mmx100mm deep(1.24.13)
7
2050
292.95
Sub-Main
-
-
-
Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard)
-
-
-
2x1.5+1x1.5 (1.8.1)
360
48225
133.96
2x2.5+1x1.5 (1.8.2)
252
37273
147.91
2x4+1x1.5 (1.8.3)
50
8264
165.29
2x6+1x2.5 (1.8.4)
30
5891
196.37
Circuit Breakers
-
-
-
S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)
20
2672
133.6
S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the 2 Way double door MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b)
2
2055
1027.68
Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.)
-
-
-
S/F of MCB 4 way Single door (2.3.1(a)
2
1758
879.09
S/F of MCB 8 way Single door (2.3.2)
2
2172
1086.43
Main switches
-
-
-
Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.)
-
-
-
S/F of 63A. ICTPN main switch (2.15.3)
1
2603
2603.68
Earthing
-
-
-
Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)
3
7595
2531.94
Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)
50
2743
54.86
Fittings
-
-
-
Supply, Installation, Testing & Commissioning of exhaust fan upto 225 mm sweep in the exising opening, including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (1.43)
13
27021
2078.61
S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL
53
36750
693.41
Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Neo/Crompton-HS /Anchor-Turbo speed star/Havels-Samrat ES/Orient-Summer Breeze pro/Great white-Aldous/Pollycab-Vital HS )
21
67419
3210.45
S/F step type modular fan regulator
21
5981
284.81
Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval type including necessary connections. ( M-5 )
13
4779
367.64
Supply & Fixing of 60 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells)
6
46943
7823.9
S/F of 10w Watt LED Bulb
48
8094
168.64
Cables
-
-
-
Provision of Armoured cable size 3 1/2 x 35sqmm (25)
50
12800
256
Laying of MV cable upto 25sqmm in ground (5.1.1)
40
5289
132.23
Laying of MV cable upto 25sqmm on surface (5.5.1)
10
831
83.1
S/M of end termination of LV/MV cable size 3 1/2 x35 sqmm (5.8.21)
2
675
337.55
S/F of 40mm HDPE pipe for cable laying and protection.
40
4800
120
Panels
-
-
-
Supply & fixing of 63A TPN Panel board 1. 63A MCCB (Make- Legrand/Seimens/L&T/C&S/) 2. 63A kitkat & bus bar
3. 32A DP MCB- 4 nos 4. 63 A 4P load changeover switch (Legrand/Seimens/L&T/C&S)- 1nos 5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad)
1
46404
46404.91
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements