Rural Development Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 12,23,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_CERWI_123049_1Bid Award Id
ViewTender No
PMGSY Online-BLGR-22/2022-23Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Cement Concrete
3.5
-
454.5
Rainforced Cement Concrete
1
-
1283.63
Brick / Stone Masonary
1.8
-
292.86
Above 600 mm dia to 900 mm dia
3
-
283.74
Construction of embankment/Sub grade/ earthen shoulder with approved material obtained from borrow pit with lift up to 1.5 m transporting to sites, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as per Clause 301.5 of MoRD specification for rural roads & as per direction of the Engineer-in-Charge.
18902.52
-
165.53
Excavation of road way in soil with hyudrulic excavatir if 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requiremetns of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m. and lead upto 1000m. as per Technical Specification Clause 302.3 of MORD.and as per the direction of the Engineer-in-charge
12649.5
-
33
Construction of embankment with approved materials deposited at site from road way cutting and excavation from drain & foundation of other strutures graded & compacted to meet the requirement of Tables 300.1 & 300.2 as per clause no.301of MORD specification for Rural roads and as per direction of Engineer-In-Charge.
487.43
-
28.76
Construction of soil aggregate sub-base by providing well graded material of nominal maximum size grading 20 mm as per table 2.3 of IRC sp 77 2008, spreading in uniform layers with tractor mount appropriate grading arrangement on prepared surface, mixing by mix in place method at OMC with tractor mount appropriate rotavator attachment and compacting with three wheeled 80- 100 KN static roller to achieve the desired density as per the specification contained in para 2.2.3.6 and 3.7 of IRC sp 77 2008 and as per the direction of Engineer In Charge.
71.27
-
515.97
Construction of granular sub-base by providing well graded material, Stone screening spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density,complite as pertechnical specification clause 401
2140.43
-
1427.3
Providing Laying and Spreading Available soil in the Shoulder on prepared surface,treating the soil with 0.6 Kg/Cum of organosilane Nanotechnology and 0.6 kg/cum acrylic copolymer mixed in OMC water (1000 ppm TDS) on loose soil . Scarify the treated mix with rotavator. Grading the treated soil with motor grader and compacting with 80-100 KN vibratory roller such as to attain minimum 98 percent of MDD of soil.Rates include all material, labour, hire charges of machinery etc. as per MoRD specifications & direction of Engineer-in-Charge.
3705
-
576.99
Providing, laying, spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 KN static roller in stages to proper grade & camber, applying & brooming, crushable screening / stone screening to fill up the interstices of coarse aggregate, watering & compacting to the required density as per Clause 405 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per direction of Engineer in Charge.
-
-
-
W.B.M G-II
702
-
2312.94
W.B.M G-III
3138.75
-
2336.61
Providing and applying primer coat with bitumen Emulsion [SS-1] on prepared surface of Granular base including cleaning of road surface & spraying primer @ 0.70kg/ 1.0 kg/sqm using mechanical means as per clause 502 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per direction of Engineer-in charge.
37470
-
58.52
Providing and applying tack coat with bitumen Emulsion [RS-1] using emulsion distributor @ 0.25 to 0.30 kg /sqm on the prepared granular surface treated with primer & cleaned with hydraulic broom as per clause 503 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per direction of Engineer-in charge.
37470
-
19.27
Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm - 5.6mm aggregate using VG-30 penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100KN static roller capacity, finished to required level and grades to be followed by seal coat of type-C as per clause 508 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work by manual means and as per direction of Engineer-in charge.
37470
-
175.49
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type-C as per clause 510 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work with VG-30 grade bitumen laid by manual means and as per direction of Engineer in charge.
37470
-
64.28
Fine dressing and turfing including transportation by mechanical means with all leads and lifts and placing of turfs in position and ramming with thapies including watering and cost of labour and all materials etc. complete as per the direction of the Engineer-in-Charge.
18460
-
19.14
Earth work in excavation for foundtion of structures upto 3 m depth as per drawing and technical specification Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material dressing of sides and bottom and backfilling in trenches excavated suitable material.as per direction of the Engineer-in-Charge
1141.49
-
323.29
Filling in foundation trenches with approved quality of sand as per clause 1108, 305.3.9 & 1200 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per direction of Engineer in charge.
85.42
-
691.04
Providing concrete for plain concrete of M-15 in open foundations/Sub Structure/Superstructure complete as per drawings and technical specification clause 802,803,1202,1203 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per the direction of the Engineer-in-Charge.
-
-
-
(A) PCC Grade M 15 For foundation
268.17
-
4348.98
(B) PCC M 15 For substructure
198.55
-
4592.84
Construction of un-reinforced, plane cement concrete pavement of desired, thickness as per thee design, over a prepaired sub base, with 43 grade cement or any other type as per cluse 1501.2.2 M30 (Grade), course and fine aggregate conforming to IS:383, maximum size of course aggregate not exceeding 25mm, mixed in a concrete mixture of not less the 0.2 cum capacity and appropriate weight batcher using the approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 25mm micro thick polythene film, wedges steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrator and finished in the contineous operation includion provision of construction and expansion, construction joint, applying debonding strips, primer, sealant, near approaches to bridge/culvert and construction joints, admixture as approved, curing of concrete slabs for 14-days, water finishing to lines and grade as per drawing and Technical Specification cluse 1501.panels are to be made by cuttion grooves of 3 to 5 mm thick and 25 to 30 mm deep in CC Slab. The grooves are to be filled with VG-30 Bitumen with a spray of fine sand at top.
337.5
-
5487.58
Providing and laying reinforced cement concrete pipe (NP3) for culverts including fixing collar with cement mortar 1:2 but excluding excavation,protection works,backfilling, concrete and masonry work in head wall and parapets as per Clause 1106 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the worketc complete and as per direction of Engineer-in-Charge
-
-
-
600 mm dia S/R HPC
10
-
2807.52
1200 mm dia S/R HPC
10
-
8381.03
Providing and laying boulder appron for bed protection with stone boulders of minimum size and weight as per table 1300.1,no fragment weighing not less than 25kg laid dry complete as per drawing and Technical Specification clause1301.
165.2
-
1392.39
Providing concrete M-25 for plain/reinforced concrete in open foundation/Sub structure/ superstructure complete as per drawings and technical specification clause 800,1205.4,1205.5 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per the direction of the Engineer-in-Charge.
-
-
-
Foundations
84.42
-
5644.25
Substructure
118.35
-
5976.19
Superstructure
65.7
-
6476.51
Supplying, fitting and placing HYSD bar for Sub structure reinforcement complete as per drawings and technical specifications Clause 100 and 1202 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per the direction of the Engineer-in-Charge..
-
-
-
Foundations
84.42
-
8864.38
Substructure
157.08
-
8881.12
Superstructure
80.33
-
9008.22
Providing Weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall etc.all complete as per Clauses 614, 709, 1204.3.7 of MORD specification for Rural roads and as per direction of Engineer-in- charge.
200
-
144.26
Providing & laying cement concrete wearing course M 30 grade excluding reinforcement etc. complete as per drawing & MORD Technical Specification clause 800, 1000 & 1200 and as per direction of the Engineer-in-Charge .
12.38
-
5669.79
Construction of R.C.C railling of M 25 grade in cast-in-situ with 20 mm nominal size aggreagate, true to line and grade, tolerance of vertical ralling post not to exceed 1 in 500, centre to - centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 and as per the direction of the Engineer-in-charge
48
-
3340.82
Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification as per Clause 1200,1204.3.8 of MoRD and as per direction of the Engineer-in-Charge.
114.84
-
1882.6
Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and MORD specification Clause 300,800 & 1700 and Annexure 1700.1 of MORD and as per direction of the Engineer-in-charge.
2
-
9923.29
Reinforced cement concrete M15 grade Kilometre stone / local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 of MORD as per direction of Engineer-in-charge.
-
-
-
5km stone
3
-
3267.24
1 km stone
8
-
1969.43
200 mtr stone
44
-
591.05
Providing and fixing of typical PMGSY Citizen Information board as per MORD specification and drawing. Three MS plates of 50 x 5 mm. thick, back plate duty welded with 75 mm dia steel tubes back on edges as per drawings. The upper and lowe plate will be welded with MS flat iron frame of 50mm x 5 mm. The steel tubes dully embeded in cement concrete M-15 grade blocksw of 600mm x 600 mm x 750 mm below ground level. All MS will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with redimixed synthetic enamel paint of superor quality in required shade and colour. All selection of framed posts and steel tubes will be painted with primer and two coats of epoxupaint as per drawing Clause 1701 and Annexure - 1700.1. and as per the direction of the Engineer-in-charge
2
-
16159.14
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1700,300 & 800 of MORD etc. complete as per direction of the Engineer-in-Charge
43
-
1376.23
Reinforced Cement Concrete M15 grade boundary pillars / local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and technical specification Clause 1704.
88
-
611.87
Construction fo RCC guard posts of 200 mm dia M15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technical Specification Clause.and as per the direction of the Engineer-in-charge
159
-
590.48
B: Construction of Proposed bridge over
Local Nallah at 5th Km on Jamut to Dhandra Road
-
-
-
Clearing grass and removal of rubbish on both side of the road to facilitate widening of berms ,disposal of the stuff including all labour, T&P articles required for the work etc. complete as per cluse 201 of MORD by manual means etc. complete as per direction of the Engineer-in-charge
450
-
1.5
Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading , grading to required slope and compacted to meet requirements of table No 300 - 2. for rural roads & as per direction of the Engineer-in-Charge.
3058
-
165.53
Construction of soil aggregate sub base by providing well graded material of nominal maximum size grading 20 mm as per table 2.3 of IRC sp 77 2008, sprading in uniform layers with tractor mount appropriate grading arrangement on prepared surface mixing by mix in place method at OMC with tractor mount appropriate rotavator attachment and compaction with three wheeled 80-100 Kn static roller to achieve the desired density as per the specification contenied in para 2.2.3.6 and 3.7 of IRC sp77 2008 and as per the direction of Engineer in charge.
117.63
-
515.97
Providing, laying, spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 KN static roller in stages to proper grade & camber, applying & brooming, crushable screening/Stone Screening to fill up the interstices of coarse aggregate, watering & compacting to the required density as per Clause 405 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per direction of Engineer in Charge.
-
-
-
Grading II
42.19
-
2312.94
Grading III
42.19
-
2336.61
Providing and applying primer coat with bitumen Emulsion [SS-1] on prepared surface of Granular base including cleaning of road surface & spraying primer @ 0.70kg/ 1.0 kg/sqm using mechanical means as per clause 502 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per direction of Engineer-in charge.
562.5
-
58.52
Providing and applying tack coat with bitumen Emulsion [RS-1] using emulsion distributor @ 0.25 to 0.30 kg /sqm on the prepared granular surface treated with primer & cleaned with hydraulic broom as per clause 503 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per direction of Engineer-in charge.
562.5
-
19.27
Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm - 5.6mm aggregate using VG-30 penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100KN static roller capacity, finished to required level and grades to be followed by seal coat of type-C as per clause 508 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work by manual means and as per direction of Engineer-in charge.
562.5
-
175.49
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type-C as per clause 510 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work with VG-30 grade bitumen laid by manual means and as per direction of Engineer in charge.
562.5
-
64.28
Earth work in cutting all kinds of soil with initial lead and lift including dressing and leveling the bed and deposite the soil.
3028.38
-
323.29
Earth work in excavation for foundtion of structures upto 3 m depth as per drawing and technical specification Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material dressing of sides and bottom and backfilling in trenches excavated suitable material.
922.78
-
219.78
Excavation of foundation in soft rock or disintegrate rock with all leads and lifts, including shorting shuttering propping bullahs, piling dewatering from foundation, supplying and working pumps and staking the excavated
materials away from working area as ordered by the Engineer-in-charge upto 60M complete with coffer dam if required.
153.94
-
112.89
Earth work in excavation of foundation is hard rock or granite rock with all leads and lifts, including dewatering from foundation supplying shoring pumps and working pumps and stacking the excavated materials away from working areas as ordered by Engineer-in-charge upto 60M and complete with coffer dam if required.
76.97
-
175.61
Filling in foundation trenches with approved quality of sand as per clause 1108, 305.3.9 & 1200 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per direction of Engineer in charge.
258.73
-
691.04
Providing concrete for plain concrete of 1:3:6 in open foundations complete as per drawings and technical specification clause 802,803,1202,1203 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per the direction of the Engineer-in-Charge.
80.17
-
4117.23
Providing concrete for plain concrete of M-15 in open foundations complete as per drawings and technical specification clause 802,803,1202,1203 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per the direction of the Engineer-in-Charge.
312.54
-
4348.98
Providing concrete for plain concrete of M-15 in Substructure complete as per drawings and technical specification clause 802,803,1202,1203 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per the direction of the Engineer-in-Charge.
481.1
-
4592.84
Providing and laying reinforced cement concrete of M-25 grade complete as per drawings and technical specifications Clause 800 & 1200 of MoRD and as per the direction of the Engineer-in-charge
-
-
-
Above Bed
184.32
-
6721.37
Wing Wall
15.38
-
12440.2
Deck slab
199.18
-
7874.85
Abutment Cap
7.55
-
7865.14
Dirt wall
4.01
-
8963.15
Road Kerb
10.68
-
9695.16
Providing and laying reinforced cement concrete of M-30 grade complete as per drawings and technical specifications Clause 800 & 1200 of MoRD and as per the direction of the Engineer-in-charge
-
-
-
WEARING COAT (Excluding Steel) & Raft
303.62
-
5669.79
Approach Slab
17.17
-
5244.66
Supplying, fitting and placing HYSD bar reinforcement in complete as per drawings and technical specification Clauses 1000 and 1200 of MoRD and as per direction of the Engineer-in-Charge.
553.31
-
8881.12
Construction of R.C.C railling of M 20 grade in cast-in-situ with 20 mm nominal size aggreagate, true to line and grade, tolerance of vertical ralling post not to exceed 1 in 500, centre to - centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 and as per the direction of the Engineer-in-charge
5.76
-
3340.82
Providing Weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall etc.all complete as per Clauses 614, 709, 1204.3.7 of MORD specification for Rural roads and as per direction of Engineer-in- charge.
492.85
-
144.26
Gravel backing in revertment including cost,conveyance & royalty of moorum all labour etc. complete as per the direction of the Engineer-in-Charge.
10.66
-
695.58
Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification as per Clause 1200,1204.3.8 of MoRD and as per direction of the Engineer-in-Charge.
85.62
-
1882.6
Supplying and fixing of RCC Guard post of 150 mm dia and IM long in RCC (1:2:4) using 20mm down graded size h.g chips including all labours, materials ,carriage ,royality & taxes of etc. complete.
60
-
590.48
Back filling behind abutment, wing wall & return wall with granular material including all cost, carriage, royality & labour as per specification & direction of the Engineer-in-Charge.
352.55
-
656.1
Providing , fitting, fixing expansion joints including all cost, carriage etc complete
30
-
9225.97
Providing , fitting, fixing tar papers including all cost, carriage etc complete
1.62
-
14.61
Providing Rough stone dry packing / pitching in slope, protection walls, approns and revetments to designed thickness using hard granite stones of required size of approved quality from approved quarry including quarrying supplying conveying and cost conveyance taxes royalty of all materials including T&P complete including filling the interstices with small stones by wedging and hammering finished to proper slope and level as per direction of the Engineer – in – charge including dewatering if required.
807.99
-
1392.39
PART-II (MAINTANCE)
Routine Maintenance after completion of costruction of work
-
-
-
1 st Year
10.78
-
38696
2 nd Year
10.78
-
46435.2
3 rd Year
10.78
-
54174.4
4 th Year
10.78
-
61913.6
5 th Year
10.78
-
69652.8
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements