Rural Development Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_CERWI_84274_1Bid Award Id
ViewTender No
Building Online NCB No.352Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Building
399
-
219.78
... More
Approach Road
14
-
219.78
... More
1.5 Mtr to 3.0 Mtr Depth
-
-
-
... More
Building
273
-
235.6
... More
Filling available (excavated or stacked at site) earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering etc.all complete as per the direction of Engineer-in-charge.
-
-
-
... More
Building
448
-
96.7
... More
Approach Road
9
-
96.69
... More
Disposal of building rubbish / malba /rock/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping site or as approved /directed by Engineer-in-charge, including all lead and lifts involved.etc including labour, all taxes (excluding GST) as per the direction of Engineer-in-charge.
-
-
-
... More
Building
224
-
151.2
... More
Approach Road
5
-
151.17
... More
Supplying and stacking of good earth at site obtained from approved borrow pits including carriage by mechanical means from within a specified Lead from the site, including loading, unloading to approved dumping ground or as approved /directed by Engineer-in-charge, including cost of equipments/ labour, conveyance, royalty, T&P etc. as per the direction of Engineer-in-charge. (earth measured in stacks will be reduced by 20% for payment).
30
-
354.7
... More
Supplying, diluting and preparing chemical emulsion like CHLORPYRIPHOS or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-constructional anti termite treatment and creating a chemical barrier under and around wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, surrounding the pipes and conduits etc. complete at the rate of 7.5 liters (or as directed by the manufacturer) per sqm on vertical and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center etc.complete as per IS:6313/1981(Part-II) and as per the direction of the Engineer -in-charge including all cost of materials, labour, taxes etc. complete.
246
-
15.2
... More
Filling in foundation, trenches and plinth with river sand in layers not exceeding 20 cm in depth, well watered and compacted in layers with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, royalties, loading and unloading, including cost of all labour, all taxes (excluding GST), sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
-
-
-
... More
Building
180
-
500.8
... More
Approach Road
113
-
500.77
... More
Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4 sand : 8 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ) ,mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period, including all cost of labour ,material, conveyance,royalties and taxes (excluding GST) , sundries , T&P etc. complete as per the direction of Engineer-in-charge.
32
-
4359.2
... More
Providing and laying of Cement Concrete of grade 1: 3 :6 (1 cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ), mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance,royalties and taxes (excluding GST) ,sundries ,T & P etc. complete as per the directions of Engineer-in-charge.
-
-
-
... More
Building
25
-
4733
... More
Approach Road
55
-
4733.03
... More
Providing and laying of Cement Concrete of grade 1: 2.5 :5 (1 cement : 2.5 sand : 5 graded stone aggregate of size 12 mm hard granite crusher broken metal ),above plinth level and mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance,royalties and taxes ,sundries ,T & P etc. complete as per the directions of Engineer-in-charge.
-
-
-
... More
Approach Road
68
-
5710.83
... More
Flyash brick masonry in cement mortar (1:6) using flyash bricks having crushing strength not less than 75kg/cm2,immersing the bricks in water before use, splays cutting, circular moulding , corbelling etc.including cost of conveyance ,taxes (excluding GST) & royalties, loading and unloading of all materials & cost of all labours ,materials, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
-
-
-
... More
In foundation & Plinth
15
-
4325.9
... More
Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-30 Including the cost of Centering and Shuttering ) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance,loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.
-
-
-
... More
R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
135
-
5505.95
... More
R.C.C. Grade beams
11
-
6190.78
... More
R.C.C. Beams, columns, grider and bressmer etc.
-
-
-
... More
Ground Floor
30
-
11495.06
... More
First Floor
23
-
12816.35
... More
Second Floor
23
-
14397.53
... More
Terrace
4
-
16289.84
... More
R.C.C. Floor and Roof slab, landing, balconies up to 4.3Mtr. Height.
-
-
-
... More
Ground Floor
37
-
9858.66
... More
First Floor
34
-
10852.67
... More
Second Floor
34
-
12041.06
... More
Terrace
6
-
13462.04
... More
R.C.C. stairs excluding landing but including railing
-
-
-
... More
Ground Floor
2
-
10992.99
... More
First Floor
2
-
12213.87
... More
Second Floor
2
-
13674.55
... More
R.C.C. Lintels.
-
-
-
... More
Ground Floor
1
-
9246.2
... More
First Floor
2
-
10117.72
... More
Second Floor
2
-
11159.19
... More
Terrace
0.2
-
12403.82
... More
R.C.C. Chajjas & sunshade
-
-
-
... More
Ground Floor
15.39
-
828.01
... More
First Floor
15.39
-
930.07
... More
Second Floor
15.39
-
1052.24
... More
R.C.C. Walls
-
-
-
... More
Ground Floor
2
-
9969.46
... More
Providing, fixing in position TMT/Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost of all materials,labour, conveyance, loading & unloading, taxes (excluding GST), T&P, cost of binding wires of 16 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge. Foundation,Plinth
-
-
-
... More
Ground Floor
269.5
-
9355.29
... More
First Floor
93
-
9380.12
... More
Second Floor
93
-
9406.2
... More
Terrace
15
-
9433.59
... More
Flyash brick masonry in cement mortar (1:6) using flyash bricks having crushing strength not less than 75kg/cm2, immersing the bricks in water before use, splays cutting, circular moulding , corbelling etc. including cost of material, conveyance ,taxes (excluding GST) & royalties, loading and unloading of all materials & cost of all labours ,materials, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
-
-
-
... More
Ground Floor
57
-
4364.25
... More
First Floor
47
-
4648.57
... More
Second Floor
47
-
4975.52
... More
Terrace
30
-
5351.53
... More
Flyash brick masonry in cement mortar (1:4) using flyash bricks having crushing strength not less than 75kg/cm2 with provision of 2nos 6mm dia. M.S. bars at every third course of half brick masonry Immersing the bricks in water before use, splays cutting, circular moulding , corbelling etc including cost of materials, labour,conveyance, loading & unloading,taxes (excluding GST) ,royalties,scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .
-
-
-
... More
First Floor
5
-
5799.24
... More
Second Floor
5
-
6126.2
... More
Providing fitting and fixing in proper position factory made wooden polymer composite (WPC) door frame having waterproof, termite & borer Proof, no rotting, swell & crack proof, bend & warp resistant properties of size 62 mm x 100 mm (dimension torelance 5 mm, subjected to approval of the EIC, no extra payment will be made for diiference in sizes) conforming to relevant IS specifications, of approved design and drawing fitted to the masonary/ concrete wall with anchor bolts of required size including cost of all materials, labour, conveyance, taxes, T&P etc. complete as per direction of Engineer-in-charge. Make:- Ecoste/ Century Ply / equivalent
-
-
-
... More
Ground Floor
28.5
-
924.27
... More
First Floor
33.75
-
924.27
... More
Second Floor
33.75
-
924.27
... More
Providing 12mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes (excluding GST) and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
-
-
-
... More
Ground Floor
268
-
151.23
... More
First Floor
283.34
-
154.68
... More
Second Floor
283.34
-
158.24
... More
Terrace
148
-
161.91
... More
Providing 16mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes (excluding GST) and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
-
-
-
... More
Ground Floor
229
-
214.7
... More
First Floor
244.34
-
223.26
... More
Second Floor
244.34
-
232.26
... More
Terrace
56
-
241.71
... More
Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes (excluding GST) and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
Ground Floor
523
-
165.19
... More
First Floor
483
-
169.22
... More
Second Floor
483
-
173.38
... More
Terrace
82.8
-
177.67
... More
Supply all labour, material for preparation of surface treating of construction joints filling up honeycombs etc. all complete as per the direction of Engineer-in-Charge by supplying and applying instant setting spray applied polyurethane waterproofing system after clearing the surface as per the manufactures recommendations, with 5years composite guaranty against leakages, to be provided by the principal manufacture.
-
-
-
... More
Terrace
246
-
802.95
... More
Providing average 40mm thick grading Concrete with (1:2:4) using 6mm hard granite chips mixing of water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface, plastering and finishing smooth to proper slope and gradient including cost of all materials, labour, conveyance, loading & unloading, watering & curing, taxes (excluding GST),royalties, sundries, T&P etc. All complete in all respect as per direction of the Engineer -in-charge.
-
-
-
... More
Terrace
246
-
634.9
... More
Supplying and applying an elastic liquid, crack bridging 2 pack acrylic polymer modified cementitious waterproofing coating system conforming to IS 2625,IS 101 and ASTM D 2370 in two coats in the Toilet portions. The surface should be dampen immediately ahead of the compound application. Whilst the surface is still damp from saturation a first coat of the waterproofing primer is applied then followed by a single coat of the waterproofing compound and leave to harden for 2-6 hrs.After the application of the first layer of the coating another fabric coating is spread over it, which is again followed by a final & top coat of the water proofing compound. Proper curing must be done after application of the waterproofing system for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking. Generally 0.7 kg and 1.5 kg of the compound is used to cover one square meter of area in the first coat and second coat respectively..The cost is inclusive of materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
Ground Floor
9
-
214.86
... More
First Floor
18
-
219.44
... More
Second Floor
18
-
224.15
... More
Providing & filling sunken floors with good quality cinder or equivalent material (approved by EIC) well compacted and top surface dressed and levelled to proper gradient as per direction of the Engineer -in-charge including cost of all labour, materials, royality, taxes (excluding GST), loading, unloading, transportation, sundries, T&P, etc. complete.
-
-
-
... More
First Floor
5
-
566.72
... More
Second Floor
5
-
566.72
... More
Providing and fixing Vitrified tile of specified size in floors on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 sand) with neat cement slurry . finishing the joint with epoxy based water proof grout to match the shades of the tiles,including 3 mm width or required spacer etc.including cost of all materials,labours,taxes (excluding GST) & royalties, conveyance ,loading and unloading ,sundries ,T & P etc .complete as per the specification & direction of Engineer-in-charge.
-
-
-
... More
Size of tile 600x 600 mm
-
-
-
... More
Ground Floor
88
-
906.33
... More
First Floor
70
-
916.56
... More
Second Floor
70
-
927.3
... More
Size of tile 600x 600 mm
-
-
-
... More
Ground Floor
60
-
906.33
... More
First Floor
90
-
916.56
... More
Second Floor
90
-
927.3
... More
Providing & laying vitrified tile of specified size in skirting cut from approved make confirming to IS-15622 specifications over 12mm thick cement mortar (1: 3) to proper line and level to a height as per design including cutting to required size and shape, fixing at corners and splays etc. including finishing the joints with epoxy based water proofing grout to match the color and shade of tiles and complete as per the design & drawing with cost of all materials, labour, conveyance, loading & unloading, taxes (excluding GST) ,royalties,sundries and T&P etc. All complete as per the direction of Engineer -in-charge.
-
-
-
... More
Size of tile 600x 600 mm
-
-
-
... More
Ground Floor
6
-
1024.36
... More
First Floor
4
-
1039.75
... More
Second Floor
4
-
1055.91
... More
Size of tile 600x 600 mm
-
-
-
... More
Ground Floor
10
-
1024.36
... More
First Floor
8
-
1039.75
... More
Second Floor
8
-
1055.91
... More
Providing & laying granite slab in floor using 16-18mm thick granite slab of approved quality, colour and size over 20mm thick cement mortar (1:4) and finishing the joints with epoxy based water proofing grout to match the colour & shade of tiles including cutting to shape, grinding and wax polishing, including all cost of labour, materials, taxes (excluding GST), royalties, loading and unloading, conveyance, sundries, watering and curing etc. complete as per drawing and direction of the Engineer -in-charge. .(Basic cost of tile 1645.67 -/Sqm)
-
-
-
... More
Ground Floor
5
-
2214.58
... More
First Floor
5
-
2224.81
... More
Second Floor
5
-
2235.54
... More
Providing & laying granite slab in Skirting using 20mm thick granite slab of approved quality, colour and size over 12 thick cement mortar (1:3) and finishing the joints with epoxy based water proofing grout to match the colour & shade of tiles including cutting to shape, grinding and wax polishing, including all cost of labour, materials, taxes (excluding GST), royalties, loading and unloading, conveyance, sundries, watering and curing etc. complete as per drawing and direction of the Engineer -in-charge. (Basic cost of tile 1645.67 -/Sqm)
-
-
-
... More
Ground Floor
11
-
1633.47
... More
First Floor
12
-
1648.87
... More
Second Floor
12
-
1665.03
... More
Providing & laying granite stone flooring using 20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 in Stair Treads, Risers, planter boxes, window sills etc over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade including cost of all labour, materials, taxes, royalties, loading and unloading, conveyance, sundries, watering and curing, etc. complete as per the direction of the Engineer-in-Charge.
-
-
-
... More
Ground Floor
26
-
2256.01
... More
First Floor
18
-
2268.33
... More
Second Floor
18
-
2281.25
... More
Providing & laying best quality anti skid Ceramic floor tile of size 300x300 mm of approved make& specifications in floor over 20mm thick cement mortar (1: 4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. Including finishing the joints with epoxy based water proofing grout to match the color and shade of tiles ,with 3 mm width or required spacer complete as per the design & drawing with cost of all materials, labour, conveyance, taxes (excluding GST),royalties,sundries and T&P etc. All complete as per the direction of Engineer -in-charge.
-
-
-
... More
Ground Floor
9
-
690.5
... More
First Floor
18
-
700.73
... More
Second Floor
18
-
711.46
... More
Providing and fixing 300x300 ceramic glazed wall tiles of approved specifications, make and shade, in skirting and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and finishing the joint with epoxy based water proofing grout to match the shade. including cost of all labour, materials, taxes (excluding GST), royalties, loading and unloading, conveyance, sundries etc. complete as per drawing and direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor
44
-
808.54
... More
First Floor
73
-
823.93
... More
Second Floor
73
-
840.09
... More
Providing and fixing cement concrete/chequred tiles of average 22 mm thick jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).as per the design & drawing with cost of all labour, materials, taxes (excluding GST), royalties, loading and unloading, conveyance, sundries, watering and curing etc. complete as per drawing and direction of the Engineer -in-charge
-
-
-
... More
Ground Floor
80
-
496.61
... More
Providing and fixing 12 mm thick frameless toughened etched glass door shutter of approved brand with machine polished edges, including top & bottom pivot & spring type fixing with an approved make including 450mm Stainless steel handle QBGHL-5 (H-Handle), QBPF-3 (TOP 1500mm long), QBPF-3(BOTTOM 1500mm long), Double cylinder floor spring (QBFS-74) as approved by the EIC with all arrangements and making necessary holes etc. all complete, including all cost of labour, material, conveyance, T&P etc.as per direction of Engineer-in-charge
-
-
-
... More
Ground Floor
5.76
-
12776.5
... More
Providing and fixing 12 mm thick frameless toughened etched glass partition of approved brand with machine polished edges, including top & bottom pivot & spring type fixing with an approved make including 450mm Stainless steel handle QBGHL-5 (H-Handle), QBPF-3 (TOP 1500mm long) ,QBPF-3 (BOTTOM 1500mm long), Double cylinder floor spring (QBFS-74) as approved by the EIC with all arrangements and making necessary holes etc. all complete, including all cost of labour, material, conveyance, T&P etc.as per direction of Engineer-in-charge
-
-
-
... More
Ground Floor
6.48
-
12776.5
... More
Providing and fixing ISI marked both side laminated flush door shutters with provision of vision panels confirming to IS 2202(Part 1) of 35/34 mm thickness ( Dimension tolerance subjected to approval of EIC & consultants) with approved colour paint over a coat of primer etc including ISI marked necessary hardware fittings such as, SS Concealed Hinges (6"), stopper, Door eye & magnet, SS Tower bolt-8", Mortise lock Handle, Cylinder coin & knob key & knob, SS lock body etc. including cost of all labours, materials, conveyance, hardware fixing, loading and unloading and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge. The qouted rate will include supply & installation of glass panes in vision panel.
-
-
-
... More
Ground Floor
7.2
-
9218.61
... More
First Floor
5.76
-
9218.61
... More
Second Floor
5.76
-
9218.61
... More
Providing and fixing ISI marked both side laminated flush door shutters confirming to IS 2202(Part 1) of 35/34 mm thickness ( Dimension tolerance subjected to approval of EIC & consultants) with approved colour paint over a coat of primer etc including ISI marked necessary hardware fittings such as, SS Concealed Hinges (5"), stopper, Door eye & magnet, SS Tower bolt-8", Mortise lock Handle, Cylinder coin & knob key & knob, SS lock body etc. including cost of all labours, materials, conveyance, hardware fixing, loading and unloading and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
-
-
-
... More
Ground Floor
3.6
-
7563.12
... More
First Floor
9
-
7563.12
... More
Second Floor
9
-
7563.12
... More
Providing and fixing ISI marked Double Leaf both side laminated flush door shutters with provision of vision panels confirming to IS 2202 (Part1) of 35/34 mm thickness ( Dimension tolerance subjected to approval of EIC & consultants) including ISI marked necessary hardware fitting with approved colour paint over a coat of primer etc and hardware fittings such as, SS Concealed Hinges (5"), stopper, top pivot, top patch, bottom patch, Door magnet, SS Tower bolt-8", Mortise lock Handle, Cylinder coin & knob key & knob, SS lock body and Floor Spring etc. including cost of all labours, materials, conveyance, hardware fixing,loading and unloading and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge. The qouted rate will include supply & installation of glass panes in vision panel.
-
-
-
... More
First Floor
2.88
-
14030.16
... More
Second Floor
2.88
-
14030.16
... More
Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634- 1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
2.88
-
11728.46
... More
First Floor
3
-
11728.46
... More
Second Floor
3
-
11728.46
... More
Supplying, Fitting and Fixing M.S works of approved designs made out of M S Flat, hollow section, i Section, Square bars/ Round bars etc. in railings, grills, gates etc of approved specifications / dimensions with necessary welded clamps fixed in proper position & plumb including a single coat of priming of approved quality metallic primer, making required holes in Masonary Walls / R.C.C Structures (where necessary) and grouting the clamps with C.C(1:2:4) with 12mm size black hard crusher broken granite stone chips, making good to the damages of Masonary Walls / R.C.C Structures including cost, conveyance, loading, unloading,stacking, royalties and taxes of all materials , cost of all labours, staging, scaffolding, sundries, T&P etc. complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor
285
-
58.2
... More
First Floor
255
-
58.2
... More
Second Floor
255
-
58.2
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying two coats of enamel paint over a priming coat of approved steel primer using M.S. angles for diagonal braces.etc including cost of all labours, materials, conveyance, hardware fixing,loading and unloading, all taxes (excluding GST), sundries and T&P etc all complete as per the design or direction of the Engineer -in-charge.
-
-
-
... More
Terrace
2.52
-
3921.24
... More
Supply and fixing of uPVC Sliding glazed Window made out of hollow multi-chambered uPVC sections having isolated drainage system with the design 2Track 2Panel System. The 2 track outer frame of the window having over all size of 98 x 52 mm (with mosquito mesh) having internal wall thickness of 2.50 mm. The glass sashes / shutters shall be made out of Upvc sections with over all size of 42 x 70 mm with internal thickness of 2.50 mm. The mosquito mesh shutter having over all size of 25 x 52 mm with internal wall thickness of 2.50 mm. Reinforceout the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with EPDM gaskit to keep glass tight and unmoved. Single point locking system (called touch lock) made out of casted zamac with white powder coated and locking hook will make of SS 304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon an having capacity of 40 - 120 kg depends on glass weight. Finseal will be provided to protect the dust in between closing point & interlocking point of glass & mesh shutters. Interlock make of the uPVC window. The sash panel is singly glazed with 5mm thick Clear glass .Complying with relevant standard specification the model and brand of the UPVC window has to be approved by the EIC before fixing.The rates shall be inclusive of all cost of materials,coveyance, loading & unloading, labour, taxes (excluding GST) and T&P etc. complete as per the drawing or direction of Engineer-in-Charge.
-
-
-
... More
Ground Floor
18.81
-
7586
... More
First Floor
16.6
-
7586
... More
Second Floor
16.6
-
7586
... More
Supplying and fixing partly fixed with top hung/ upvc ventilator having a frame size of 60 w x 45 ht and wall thickness of 2mm.The upvc frame is reinforced throughout with galvanised steel of 1.2mm thickness. The sash has a size of 60 w x 78 h and wall thickness 1.2 mm reinforced with galvanised steel throughout. The glazing provided is of thickness 5mm frosted glass both in fixed glass and in sash panel.The model and brand of the upvc ventilator shall be approved by the EIC before fixing.The rates shall be inclusive of all cost of materials,labour,T&P etc. complete.
-
-
-
... More
Ground Floor
3.24
-
7115
... More
First Floor
3.24
-
7115
... More
Second Floor
3.24
-
7115
... More
Supplying and fixing partly fixed with upvc ventilator with exhaust provision having a frame size of 60 w x 45 ht and wall thickness of 2mm.The upvc frame is reinforced throughout with galvanised steel of 1.2mm thickness. The sash has a size of 60 w x 78 h and wall thickness 1.2 mm reinforced with galvanised steel throughout. The glazing provided is of thickness 5mm frosted glass both in fixed glass and in sash panel.The model and brand of the upvc ventilator shall be approved by the EIC before fixing.The rates shall be inclusive of all cost of materials,labour,T&P etc. complete.
-
-
-
... More
Ground Floor
0.72
-
7115
... More
First Floor
1.8
-
7115
... More
Second Floor
1.8
-
7115
... More
Supplying, fitting and fixing of stainless steel of 304 grade in hand rail using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mt c/c and stainless square pipe bacing of size 32mm x 32mm x 2mm in three rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance of all materials, labour T&P etc. required for the complete in all respect as per the direction of Engineer -in- charge.
-
-
-
... More
Ground Floor
70
-
316.48
... More
First Floor
70
-
316.48
... More
Second Floor
70
-
316.48
... More
Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even finish with two or more coats on new work over a coat of suitable shade with primer of approved brand and manufacturer's instructions including cost of all materials with taxes (excluding GST) and transportation, loading & unloading, all labour, scaffolding, sundries, T&P etc. All complete as per the direction of the Engineer -in-charge.
-
-
-
... More
Ground Floor
11
-
200.55
... More
First Floor
18
-
205.71
... More
Second Floor
18
-
211.02
... More
Providing and applying 2 coats of Plastic Emulsion Paint of approved quality and shade over a coat of putty & wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats,including of all materials, labour, conveyance, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)
-
-
-
... More
Ground Floor
595.1
-
95.35
... More
First Floor
583
-
98.11
... More
Second Floor
583
-
101.01
... More
Terrace
114
-
104.05
... More
Providing and applying two coats of Weather Coat Paint of approved make, quality and shade to the external surface of the building over a coat of primer of approved make and finished smooth and even surface to receive painting of approved shade and quality after cleaning the plastered surface perfectly by watering and brushing including cost of material, putty, paint, brushes, all labour, taxes, loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
352.9
-
84.39
... More
First Floor
314
-
86.96
... More
Second Floor
314
-
89.65
... More
Terrace
173
-
92.47
... More
Providing one coat of Textured finish of approved make, quality and shade over the wall surface of the building over a coat of primer of approved make including cost of material, brushes, all labour, taxes (excluding GST), loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)
-
-
-
... More
Ground Floor
153.93
-
145.1
... More
First Floor
122.58
-
147.26
... More
Second Floor
122.58
-
149.53
... More
Terrace
86.5
-
151.9
... More
Providing & fixing of 6 mm thick High pressure Laminate of approved make fixed with frames made up of powder coated aluminum tube of weight 1300 grams & thickness 0.9 mm with stainless steel screw & rivet including the cost of all materials, labour,etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)
-
-
-
... More
Ground Floor
22.52
-
5977.18
... More
First Floor
34.42
-
5977.18
... More
Second Floor
34.42
-
5977.18
... More
Supply, Installation of Semi Unitized Structural Curtain Glazing with 6mm thick reflective toughened glass of approved make as per elevation drawings & detailed technical specification enclosed using heavy duty aluminium extruded built up profiles.The rates shall be inclusive of all cost of materials,labour, transportation, loading & unloading, scaffolding, taxes (excluding GST), sundries and T&P etc. complete in all respect as per the shop drawing submitted by contractor and approved by EIC. but exclusive of spandrel insulation & smoke seal which shall be paid for separately. The Quoted rate will include supply & installation of the all the materials for complete installation of the system including detailed engineering design, analysis & vetting from the competetnt authority.
-
-
-
... More
First Floor
34.44
-
6969
... More
Second Floor
34.44
-
6969
... More
Supply, Installation of Aluminium Powder Coated Louvers with Outer frame as 25 mm x 50 mm x 1.5 mm tubular frame and Channel suitable to Louver Panels with Panel dimension as 56.5 mm without bend with wall thickness as 2 mm with two nos of screws grooves. Outer frame shall be Cut into Rectangular or Square sizes or as per site requirements with mitered joints and CSK screws. Main frames shall be fixed onto the openings with approve make anchor fasteners of M10x80. Louver Panels shall be fixed onto the main frames by SS Screws of PH M10x50 of approved equivalent screws. Including all cost of labour,Material, Coveyance, transportation, loading & unloading, scaffolding, taxes (excluding GST),T&P etc. and as per the direction of EIC.
-
-
-
... More
Ground Floor
8.07
-
7373
... More
First Floor
8.1
-
7373
... More
Second Floor
8.1
-
7373
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
-
-
-
... More
Ground Floor
38.19
-
538.42
... More
Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand : 2 graded stone aggregate 6 mm nominal size chips) for coping, including the cost of centering, shuttering and finishing including placing two nos. of 8 mm dia Fe 500 grade reinforcement bars suitably as per the approved drawings including the cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer -in-charge
-
-
-
... More
Terrace
2
-
9368.19
... More
Providing fitting and fixing of false ceilling with aluminium anodised T section No. 3215 with 2'-0" C/C, L section No. 1705 upto 15 micron on four walls to be fixed by means of steel screws and P.V.C plug and the aluminium grid 2'-0" x 2'-0" with prelaminated particle board suspended from ceiling etc icluding all cost of labour, material, T&P, conveyance, royalities and taxes etc all complete as per the direction of Engineer In Charge.
-
-
-
... More
Ground Floor
71.62
-
758.97
... More
First Floor
160.8
-
758.97
... More
Second Floor
160.8
-
758.97
... More
E.I. Works
Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire = Finollex / L & T/ Anchor/ Havels/ V-Guard/ Greatwhite / Polycab)
-
-
-
... More
-do- .... Light point Group A (1.1.1)
57
-
458.79
... More
-do- .... Light point Group B (1.1.2)
41
-
681.46
... More
-do- ....Light point Group C (1.1.3)
82
-
960.53
... More
-do- .... Fan point Group B (1.1.2)
30
-
681.46
... More
-do- ....Fan point Group C (1.1.3)
3
-
960.53
... More
-do- .... Call bell point Group C (1.1.3)
6
-
960.53
... More
-do- .... Ex-Fan point Group B (1.1.2)
12
-
681.46
... More
S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
2 Modular box with base & cover (1.24.2)
8
-
210.84
... More
4 Modular box with base & cover (1.24.3)
9
-
257.66
... More
6 Modular box with base & cover (1.24.4)
4
-
315.73
... More
8 Modular box with base & cover (1.24.5)
4
-
357.26
... More
12 Modular box with base & cover (1.24.6)
26
-
468.8
... More
S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4)
42
-
220.34
... More
S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. (1.26)
7
-
441.43
... More
S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (1.2.7)
6
-
610.75
... More
S/F of Computer board consisting of 3 Nos. of 5 amp. Modular Switch and socket complete with wiring on 12 Modular box with base & cover (1.25.1 + 1.25.4 )x3+ 1.24.6)
16
-
1259.98
... More
Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required ( Make of wire- Finolex/ / Anchor/ Havels/ V-guard / HPL / L&T / Gratewhite / Polycab).
-
-
-
... More
'-do- 2x1.5sqmm +1x1.5sqmm ( 1.8.1 )
515
-
126.07
... More
-do-2x2.5sqmm +1x1.5sqmm ( 1.8.2 )
790
-
140.03
... More
-do- 2x4sqmm +1x1.5sqmm ( 1.8.3 )
395
-
157.41
... More
-do- 4x6sqmm +2x2.5sqmm ( 1.8.10 )
15
-
285.91
... More
-do- 4x10sqmm +2x4sqmm ( 1.8.11 )
25
-
413.16
... More
S/Fof 'B' series SP MCB of 5A to 32 Amp rating 240Volt "B" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.1)
96
-
130.16
... More
S/F of Call bell/ Buzzer ISI marked sutiable for DC/AC single Phase 230 volts complete as required.(1.30)
6
-
120
... More
Supply, Instaliatiion,Testing and commissioning of Bulkhead fittings including fixing of 9watt LED Lamp .
2
-
402
... More
S/F of batten holder BK angle holder ISI marked including connection etc instead of ceiling rose (Make: Cona / Anchor / Havells / Greatwhite / Preeti / HPL) (1.29-1.28)
42
-
15.98
... More
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick and 25mm x 5mm copper tape (1.15Kg. Per Mtr.) 3.5Mtr. & 20mm G.I.pipe medium class 2.7 Mtr. ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc wih charcoal and salt as required. (3.5 + 3.6)
2
-
5596.28
... More
Providing and fixing 8 SWG copper wire in recess for loop earthing as required. (3.18)
20
-
92.79
... More
Supply & Fixing of 48" A.C. ceiling fan without regulator incudig numbering of reputed mark including all connections (Make:Usha-Striker Millenium / Crompton-Jura / Havells-Velopcity/ Spark/ Anchor-XL/ Orient-Summer Pride )
33
-
2425
... More
S/F of stepped type modular ceiling fan regulater(1.25*)
33
-
282.23
... More
S/F of Fan hok S'type made of 16mm MS rod as per specificationn
33
-
241
... More
S/F of Extra downrod 20mm dia (20 cm) (1.41)
20
-
29.29
... More
Supply, Installation,Testing and Commissioning of Exhaust fan of 225mm sweep in the existing opening,including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (Make- USHA/ Orient / Almonard)
12
-
1927
... More
S/F of 60 watt LED street light fitting complete with all connection.\ including fixing of bracket and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL)
6
-
7801
... More
S/F of 15 watt LED Ceiling light (Round shape) complete with all connection and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL)
70
-
1089
... More
S/F of 18-25 watt LED Tube light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL)
57
-
683
... More
S/F of Partico Light with 18 watt LED light fitting complete with all connection as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL)
3
-
2162
... More
S/F of 15A socket on 2 Modular Metal box for A.C and Gyser( 1.24.2 + 1.25.5 )
19
-
420.76
... More
S/F of A.C.starter
17
-
689.83
... More
S/F of 15A switch on 2 Modular type for Gyser( 1.25.3 )
2
-
373.04
... More
wiring to sub main with 1*1.5 mm2 single core multi strand copper wire for inverter wiring (1x1.5mm)
389
-
45.83
... More
Supply of instalation, Testing commissioning of 12 Watt. LED bulb
42
-
284.54
... More
S/F of 250A, pannel box of size 40''X32"X12" made of 2mm CR sheet enclosure dust and vermin proof duly painted with 7 tank process power coated paint of siemens gray shade with provision of a) 250A 4 Pole MCCB(36KA),250A Spreader link and rotary handle; Make: L&T -1 no. b)415V Kit Kat Fuse Rewirable - 4 Nos. c)250A copper bus bar -1 no d) 200A 4 pole Changeover-1 no. e)63A 4 P MCB - 3 nos. f)63A DP MCB -3 Nos. g) 32A DP MCB-3 Nos. e)Digital metering and RYB indicator with danger board f)Internal wiring with copper lugs , wire & other accessories
1
-
101612
... More
S/F of 4Way (4+12) TPN MCB Double Door Distribution board (2.5.5)
6
-
2155.97
... More
S/F of 50mmsq 3½ Core alluminium armoured cable (Make: Nico/ Polycab/ Glostar / Havells) (26)
70
-
334.1
... More
Laying of 50mmsq 3½ Core cable on surface (5.5.2)
12
-
122.31
... More
Laying of 50mmsq 3½ Core cable in ground (5.1.2)
55
-
138.8
... More
Supplying and making end termination with brass compression gland and aluminum lugs for 50mmsq 3½ Core cable (5.8.22)
2
-
330.61
... More
P.H. Works
Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 in depth and depositing the soil as per direction of EIC.
-
-
-
... More
Initial lift upto 1.50m
38.38
-
211.35
... More
From 1.50m to 3.00m depth
31.45
-
226.88
... More
Supplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC
15.83
-
425.7
... More
Supplying all materials labour T&P and providing c.c. (1:3:6)using 4cm hg metal including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.
4.08
-
4893.8
... More
Supplying all materials labour, T&P and providing c.c. (1:1.5:3) using 12mm hg chips including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC
3.36
-
7091.4
... More
Supplying all materials labour T&P and providing c.c. (1:4:8)using 4cm hg metal including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.
1.13
-
4518.5
... More
Supplying all materials labour T&P and providing brick work with Fly ASh Bricks having c. s. not less than 75Kg/cm2 with dimensional tolerance +-8% in cm (1:3)including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and dir of EIC.
-
-
-
... More
F&P in cm (1:3)
23.54
-
5005.3
... More
F&P in cm (1:4)
4
-
4788.1
... More
S&T in cm (1:4)
6.03
-
4821.4
... More
Supplying all materials labour T&P and providing c.c. (1:1.5:3) using 12mm hg chips for RCC works including hoisting laying, watering, curing, conveyance of all materials to work site payment of royalty taxes etc. all complete as per specification and direction of EIC
2.95
-
7091.4
... More
Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire and 18 to 20 gauge conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.-
2.8
-
10561.1
... More
Supplying all materials labour T&P and providing rigid and smooth centering and shuttering for RCC works including false work and dismantling them after casting including conve4yance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC-
20.97
-
657.4
... More
Supplying all materials labour T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.12mm thick CP (1:3)
43.15
-
166.2
... More
12mm thick CP (1:4)
57.08
-
162.6
... More
Supplying all materials labour T&P and providing cement punning including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.
43.15
-
32.7
... More
Supplying all materials labour T&P and providing cement flush pointing to brick masonry (1:3) including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC
22.31
-
146.9
... More
Filling F&P with excavated materials including watering and ramming as per direction of EIC
4.7
-
118.59
... More
Supplying all labour materials T&P and fixing of 2” RCC baffle wall precast with cc (1:1.5:3) using 12mm bhg chips for fitted to septic tank as per PH specification and direction of EIC
1.62
-
1014.1
... More
Supplying all materials labour T&P and providing fitting and fixing SW Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size hg chips all complete materials to as per specification and dir of EIC.100x100x100mm PVC Tee/Y
2
-
422.7
... More
Supplying all labour materials T&P and fixing of MS step iron in 20mm dia MS steel bar and fixing into walls of septic tank duly embedded in c.c. (1:3:6) all complete as per PH specification and direction of EIC.
12
-
283.8
... More
Supplying all materials labour T&P and providing precast RCC manhole cover with cc (1:12:3) of 12mm hg chips including conveyance of all materials to site after payment of royalty and taxes etc. all complete as per PH specification and direction of EIC (size 550mmx550mmx76mm)
2
-
369.5
... More
Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C 14 x5.00
70
-
551.7
... More
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. 14x1.70
23.8
-
3181.1
... More
Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC.
-
-
-
... More
G.Floor Toilet= 1x9.00 x2.10=18.90
Toilet=1x6.00x2.10=12.60
Kitchen=5.40 x1.50=11.34
Basin=3,80x2.10=7.98
50.82
-
1168.9
... More
First Floor Toilet= 2x9.00 x2.10=37.80
Toilet=2x8.00x2.10=33.60
Kitchen=6.80 x2.10=14.28
85.68
-
1200.2
... More
2ndFloor Toilet= 2x9.00 x2.10=37.80
Toilet=2x8.00x2.10=33.60
Kitchen=6.80 x2.10=14.28
85.68
-
1233.1
... More
Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC.
-
-
-
... More
G.Flor=1X2.90 X1.80=5.22
1X2.00X1.10=2.20
4X0.75X0.20=0.60
1x2.00x0.90=1.80
1x1.20 x2.00=2.40
12.22
-
1113.6
... More
First Floor 2X2.40 X1.50=7.20
2X2.90X1.80=10.44
5X0.75X0.20=0.75
1x1.80 x1.60=2.88
21.27
-
1135.3
... More
2nd Floor 2X2.40 X1.50=7.20
2X2.90X1.80=10.44
5X0.75X0.20=0.75
1x1.80 x1.60=2.88
21.27
-
1158.2
... More
Supplying all materials labour T&P and providing painting two coats with approved cement paint on plastered surface etc. all compt as per specification and direction of EIC.
130
-
35.8
... More
Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC.250mm thick wall
18
-
187
... More
Cutting hole through RCC Chajja
6
-
112.4
... More
Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking G.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC.250mm to 375mm thick wall
23
-
51.2
... More
Cutting hole through RCC Roof
3
-
182
... More
Groove cutting through wall & floor
55
-
177.4
... More
Supplying all materials labour T&P and fixing water closet, squatting pan (Indian type WC pan/Orissa pattern squatting pan) duly embedded in cc(1:5:10) using 4cm hg metal all compt. As per direction of EIC. Fixing EWC with P Trap (Parryware
7
-
2233
... More
Wall Mounted Water closet (Parryware)
2
-
13306.8
... More
Fixing EWC Seat cover (Parryware)
9
-
594.1
... More
Supplying all materials labour T&P and fixing water closet, squatting pan (Indian type WC pan/Orissa pattern squatting pan) duly embedded in cc(1:5:10) using 4cm hg metal all compt. As per direction of EIC.580mmx400mm Orissa Pan (Parryware)
3
-
2901.3
... More
Supplying all materials labour T&P and fixing bowl pattern urinal including connecting the urinal with west pipe by means of white lead list with chopped hemp etc. all complete as per direction of EIC. Half Stall Standing urinal (Nycer /Paryware
11
-
4871.8
... More
15 mm dia Urinal Spreader
11
-
300
... More
Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC.
-
-
-
... More
110mm dia UPVC SWR Pipe
90
-
320.5
... More
110mm dia U-PVC P. Trap
13
-
299.7
... More
110mm U-PVC S/J with Door
10
-
296.7
... More
110mm U-PVC D/J with Door
10
-
350.3
... More
110mm U-PVC door bend
18
-
204.7
... More
110mm dia U-PVC Plain bend
14
-
147
... More
110mm U-PVC Plain Tee
8
-
268
... More
110mm U-PVC Cowl
7
-
77.3
... More
125mm dia CP Grating
16
-
71.4
... More
75mm dia U-PVC SWR Pipe
22
-
180.6
... More
75mm dia U-PVC Plain Tee
5
-
161.8
... More
75mm U-PVC S/J Door Tee
6
-
177.9
... More
75mm U-PVC Door Bend
6
-
122.9
... More
75mm U-PVC Plain Bend
4
-
93
... More
Supplying all materials labour T&P and fixing wash kitchen sink/laboratory sink with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per PH sp and dir of EIC.610x510x200 mm Stainless Steel kitchen Sink
1
-
4310.5
... More
Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC.550x400mm WHBParyware
15
-
2335.4
... More
WHB-Padestrill Paryware
15
-
2354.4
... More
Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.Rectangular B.E Mirror
15
-
717.2
... More
Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.
-
-
-
... More
25mm x60mm CP Towel rail Jaquar
15
-
1015
... More
CP Towel ring Jaquar
14
-
970.2
... More
CP double Hook Jaquar
5
-
950.9
... More
Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.
-
-
-
... More
CP tooth brus holder Jaquar
28
-
1216.7
... More
CP Liquid soap holder
6
-
322.1
... More
Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC15mm dia cp revolving shower .Jaquar
8
-
1176
... More
Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC.450mmx125mm size Plate Acraylic Shelf (S.R)
2
-
715.7
... More
450mmx125mm size Plate Acraylic Shelf(Parryware)
18
-
910.3
... More
Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern
12
-
1841.4
... More
Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap KB Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap
6
-
1813.9
... More
Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, Ist class KB Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.
-
-
-
... More
Inside size : 760 x 760 x 460mm Inspection Chamber
8
-
9462.6
... More
Addl. Depth 0.15 m to 0.90m
5
-
980.9
... More
Supplying all materials labour, T&P and constructing soak way pit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.1.21m dia x 2.10m deep
5
-
5556
... More
Supplying all materials labour T&P and construction soak way pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and Ist class KB Brick work in cm(1:6) for the remaining height at top 12mm thick cp (1:4) inside and outside over masonry brick work gravel packing the rear of well staining RCC cover slab in c.c. (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including e.w. in open well excavation in all kinds if soil and refilling the cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to work site payment royalty, taxes etc. complete as per approved drawing specification and direction of EIC. 1.40m dia x 2.00m deep soak way pit
3
-
20497.4
... More
Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.
-
-
-
... More
110mm dia with allround encasing
28
-
1271.8
... More
160mm dia with allround encasing
22
-
1992.9
... More
Supplying all materials, labour T&P and construction of M.H chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, Ist class KB Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Manhole Chamber
4
-
16807.9
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and dir of EIC.
-
-
-
... More
20mm dia PVC(ASTM) pipe(Internal)
76
-
154.8
... More
25mm dia PVC(ASTM) Pipe(EXternal)
68
-
134.7
... More
25mm dia C PVC Pipe(EXternal)
45
-
274.1
... More
20mm dia C.PVC Pipe(Internal)
65
-
220.7
... More
32mm dia PVC(ASTM) Pipe(EXternal)
60
-
179.4
... More
Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC.
-
-
-
... More
15mm dia CP pillar cock
Jaguar
12
-
1443.7
... More
20mm dia cp concealed stop cock Jaguar
8
-
1547.4
... More
15mm dia cp angle stop cock Jaguar
48
-
883
... More
15mm dia cp bib cock S.B. Jaguar
8
-
1039.5
... More
15mm dia cp bib cock L.B. Jaguar
10
-
1334.8
... More
15mm dia CP Two way angle/bib Cock Jaguar
9
-
1137.9
... More
Health Fuccet
Jaguar
9
-
1310.2
... More
15mm dia CP Extension piece
90
-
58.7
... More
15mm dia CP Wall Mixture Jaguar
3
-
3511
... More
15mm dia CPBasin Mixture Jaguar
3
-
3289
... More
25mm dia PVC Valve Good qlty Jaguar
4
-
560.4
... More
32mm dia PVC Valve Good qlty Jaguar
5
-
1134.1
... More
25mm dia Ball cock Good qlty Jaguar
3
-
1010.4
... More
Supplying all materials labour T&P and fixing water storage sintex tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC. ( 2000 lit sintex tank) 3rd Floor
4
-
18812
... More
Supplying all materials labour T&P and construction of masonry staging with providing Fly Ash work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.2000 ltr capacity 3rd Floor
4
-
21789.4
... More
Labour for drilling a perfectly vertical bore holes of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilled rig as required to suit the site condition as per the direction of E.I.C. including use of own rig with its accessories, tools and plants and consumable etc. for lowering of 125mm dia consumable etc. for lowering if 125mm dia PVC/GI Pipes for housing filled with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC) casing pipes it required to prevent collapse of overburden portion is to be provided by the contractor including lowering and withdrawing after completion of tubewell.
-
-
-
... More
Drilling of 125mm dia bore- 0mtr to 60.00 mtr
60
-
485
... More
Drilling jof 100mm dia bore - 60.01mtr toAbove
90
-
485
... More
Lowering the following sizes GI/PVC Pipes with or without slotted pipes as per the necessity from gravel level upto 30 mtr depth and fitted and fixed up in perfectly vertical position including cutting and threading pipe and slotted pipes and supplying and fixing all jointing materials tools and plants etc. completes and keeping the top of the casing pipes threaded including plugging tubewell to prevent entryof foreign materials.
-
-
-
... More
From above Lowering of 125mm dia PVC Pipe - 0 mtr to 80.00 mtr
60
-
72.3
... More
Cost of 125mm dia pvc pipes 0mtr to 55.30
60
-
1089.04
... More
Cleaning and developing the tube wells with their own compressor continuously jworked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of EIC
4
-
2147
... More
Supplying all labour T&P and fitting and fixing of IM-II hand pumps with 32mm dia Gi Pipe 24mtr and CI cylinders and 12mm B.S. connecting rod including lowering with fitting of extra socket etc. as per the direction of EIC including cost of materials.
1
-
19214.88
... More
Supplying all labour T&P & materials for construction of tube well platform etc. all complete as per PH specification and direction jof Engineer-in-charge.
1
-
6234.7
... More
Supplying all labour T&P & materials for construction of Drain etc. all complete as per PH specification and direction jof Engineer-in-charge.
3
-
761.6
... More
Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C.
2
-
15849.15
... More
Supplying all labour T&P and fitting and fixing of 1.00HP single phase verticaql submersible pump set with commissioning and testing etc. all complete as per direction of EIC.
2
-
1316.96
... More
Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC.
2
-
2809.32
... More
Supplying and fitting and fixing of three core flat cable (2.5mm2) of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC.
48
-
114
... More
Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC.
2
-
1660
... More
Supplying and fitting and fixing of HDPE pipes and pipe fittings with making connection to pump set including all cost, conveyance and taxes etc.all complete as per direction of EIC.
32mm dia HDPE Pipe(Internal Pipe)
40
-
127.5
... More
Provision for instalation of sensor for pump security system incldung of conection of Powerr supply to the machine..
1
-
4700
... More
Supplying all materials labour T&P fitting and fixing of 5 KVA Voltage Regulator (Fully automatic) having voltage range from 90 Volt to 240 volt and DP switch with wiring etc. all complete as per specification and direction of EIC. (Stablizer)
1
-
9375
... More
Electrification for pump house L/S
1
-
3000
... More
M.S.DOOR
80
-
76.8
... More
SKY LIGHT
12
-
300
... More
Provision for instalation of water cooler incldung of conection of water supply at F.Floor 200mm x150mm dia D T H METHOD
2
-
45000
... More
Labour for drilling a perfectly vertical bore holes of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilled rig as required to suit the site condition as per the direction of E.I.C. including use of own rig with its accessories, tools and plants and consumable etc. for lowering of 125mm dia consumable etc. for lowering if 125mm dia PVC/GI Pipes for housing filled with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC) casing pipes it required to prevent collapse of overburden portion is to be provided by the contractor including lowering and withdrawing after completion of tubewell.
-
-
-
... More
Drilling of 200mm dia bore- 0mtr to 30.00 mtr
30
-
616.2
... More
Drilling GOF 200 mm dia bore - 30.01 mtr. to 60.00 mtr
30
-
616.2
... More
Drilling GOF 150 mm dia bore - 61.01 mtr. to above
120
-
616.2
... More
Lowering the following sizes GI/PVC Pipes with or without slotted pipes as per the necessity from gravel level upto 30 mtr depth and fitted and fixed up in perfectly vertical position including cutting and threading pipe and slotted pipes and supplying and fixing all jointing materials tools and plants etc. completes and keeping the top of the casing pipes threaded including plugging tubewell to prevent entryof foreign materials.
-
-
-
... More
From above. Lowering of 125mm dia PVC Pipe - 0 mtr to 55.00 mtr
60
-
122.6
... More
Cost of 125mm dia pvc pipes 0mtr to 55.30
60
-
2276.89
... More
Cleaning and developing the tube wells with their own compressor continuously jworked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of EIC
2
-
4392
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements