Rural Development Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Technical
Technical
Financial
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is up to "B" Class, specifically for Scheduled Caste or Scheduled Tribe contractors.
Bid Capacity
... View More
Assessed Available Bid Capacity = (A * N * 2) - B Where: A = Maximum value of works executed in any one year during the last five years (updated to the current price level) B = Value of current price level of the existing commitments & ongoing works to be completed during the next years N = Number of years prescribed for completion of the works for which the bids are invited. The bid capacity should be more than the estimated cost of the work.
Technical Capacity
... View More
The required prior work experience for the bidder includes executing similar nature of work worth 75% of the estimated cost put to tender during any three financial years taken together of the last preceding five years. The bidder should also have a total financial turnover in respect of Civil Engineering works of an amount not less than the amount put to tender during any three financial years taken together of the last preceding five financial years. The value of similar works completed is not explicitly stated, but the bidder needs to provide information on works executed, including a certificate showing details of similar nature of works, certified by the concerned Superintending/Executive Engineer. The bidder also needs to provide an Annual Turnover Certificate from a Chartered Accountant for the last five financial years, with a breakup of civil works and total works for each financial year. Specific values of works completed are mentioned in a table, with values ranging from 1.10 to 1.61 (in Rs. lakhs) for the last five financial years. However, the exact percentage or amount of similar works completed required for the bidder is mentioned as 75% of the estimated cost put to tender.
Costs
EMD
₹ 8,84,955Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CERWI_109210_8Bid Award Id
ViewTender No
Tender Online C.C-26 of 2024Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Reworking of scarified bituminous surface suitably after supplementing base materials with stone screened dust and compacting finished surface as per Technical Specification and as per direction of the Engineer-in-Charge.
13180.13
16
-
... More
Excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5m and lead upto 1000m as per Technical Specification Clause 302.3 of MoRD.
6750.58
74
-
... More
Construction of embankment with approved material obtained from borrow pits with all lifts & leads, transporting to site by mechanical means, spreading, grading to required slope and compacting to meet requirement of Tables 300.2 & clause 305 of MoRT&H specification for Road & Bridge works as per direction of the Engineer-in-Charge.
22343.74
200
-
... More
Construction of embankment with approved materials deposited at site from road way cutting and excavation from drain & foundation of other strutures graded & compacted to meet the requirement of Tables 300.1 & 300.2 as per clause no.301of MORD specification for Rural roads and as per direction of Engineer-In-Charge.
5651.78
50
-
... More
Supplying and filling moorum of approved quality including watering to complete saturation and ramming complete with all lead and lifts including cost, conveyance, royalty of all materials and cost of all labours and T&P required for the work etc complete as per direction of Engineer-in charge.
1235.22
518
-
... More
Fine dressing and turfing including transportation of turfs by mechanical means with all leads and lifts and placing the turfs in position and ramming with thappies including watering and cost of labour and all materials etc complete as per direction of Engineer-in charge.
15063
31
-
... More
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on repared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision) and as per direction of Engineer in Charge
2297.97
1769
-
... More
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works (4th Revision) and as per direction of Engineer in Charge
4601.81
2304
-
... More
Providing and applying primer coat with bitumen Emulsion [SS-1] on prepared surface of Granular base including clearing of road surface & spraying primer @ 6.00 kg / 10 sqm using mechanical means as per technical specification clause 502 of MoSRT& H for Road & Bridge works (4th Revision) and as per direction of Engineer-in charge
28167.81
36
-
... More
Providing and applying tack coat with bitumen Emulsion [RS-1] using emulsion distributor @ 3.00 kg / 10 sqm on the prepared granular surface treated with primer & cleaned with hydraulic broom as per technical specification clause 503 of MoSRT& H for Road & Bridge works (4th Revision) and as per direction of Engineer-in charge
28167.81
19
-
... More
Providing and laying bituminous macadam with hot mix plant using crused aggregates of specified grading 19 mm nominal size (Grading-II) premixed bituminous binder of 60/70 penetration grade of bitumen, transported to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per Clause 504 of MoSRT&H Specifications for Road & Bridge works (4th revision) and as per direction of the Engineer-in-Charge.
1408.4
7708
-
... More
Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of 10mm nominal size (Grading-II) premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheelede,vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specifications for Road & Bridge works (4th Revision) including cost, conveyance, royalty, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge.
704.2
9869
-
... More
Filling in foundation trenches with approved quality of sand as per drawing and technical specification clause 1108, 305.3.9 & 1200 of MORD and as per direction of Engineer in charge.
1134.15
1300
-
... More
Plain Cement Concrete in open foundation with clean black hard granite stone aggregates of 40mm & down graded size of approved quality from approved quarry as per drawings & Technical Specification Clause 1109, 1302.5, 802, 804, 805, 806, 807, 1202 and 1204 of MORD specification for Rural roads and as per direction of Engineer-in-Charge.
i) P.C.C M-15 (With dewatering)
609.79
5786
-
... More
ii) P.C.C M-15 (Without dewatering)
425.17
5710
-
... More
Plain/reinforced cement concrete in Sub structure with 40 mm and down graded black hard granite crusher broken stone chips size of approved quality from approved quarry complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 of MORD specification for Rural roads and as per the direction of the Engineer-in-Charge.
i) P.C.C M-15
2320.67
5851
-
... More
R.C.C work with 20mm and down graded black hard granite crusher broken stone chips size of approved quality from approved quarry as per drawings & Technical Specification including hoisting and laying etc complete as per direction of Engineer-in-charge.
i) R.C.C M-15 in drain
75
6159
-
... More
RCC work of M-25 grade with 20mm and down graded black hard granite crusher broken stone chips including hoisting and laying etc complete as per the direction of the Engineer-in-Charge.
Raft
45
7027
-
... More
Rib, Hunch
68.52
8808
-
... More
Deck slab
45
9603
-
... More
Supplying, fitting and placing HYSD bar reinforcement complete as per drawings and technical specifications Clauses 1000 and 1202 of MORD specification for Rural roads and as per the direction of the Engineer-in-Charge.
289.11
8765
-
... More
Supplying and laying R.C.C. Hume pipes of NP3 class (confirming to relevant IS specification) for culverts including fixing collar with cement mortar 1:3 including cost, conveyance royality, labour, T&P,all other materials required for the work etc.complete as per direction of Engineer-in-charge.
i) 600 mm dia
60
6768
-
... More
ii) 1000 mm dia
180
6768
-
... More
Construction of precast RCC railing of M25 grade , aggregate size not exceeding 12mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications including cost, conveyance, royalty of all materials, labour charges, T&P etc. required for the work complete in all respect as per specification and direction of Engineer-in-Charge.
24
2325
-
... More
Construction of Unreinforced cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork, laying and fixing of 125 micron thick polythene film, wedges including levelling the formwork as per drawing, spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, primer, sealant, admixtures as approved, curing of concrete slabs for 14-days with curing compound and water, finishing to lines and grade as per drawing and Technical Specification Clause 1501 of MORD and asper direction of Engineer-in charge.
1562.43
7121
-
... More
Supplying & fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern over a sand layer of average thickness of 30mm etc. coomplete in all respect conforming to IRC SP-63:2018 and as per direction of Engineer-in-Charge.
4550.55
647
-
... More
Providing and laying cement concrete wearing course M30 grade excluding reinforcement complete as per drawing and technical specifications clauses 800 and 1206.3 of MoRD and as per direction of the Engineer-in-Charge
6.75
7046
-
... More
Providing Weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall etc.all complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 of MORD specification for Rural roads and as per direction of Engineer-in- charge.
813
112
-
... More
Rough stone dry packing in approns and revetments with hard granite stone 30cm and above size laid dry complete as per drawing and technical Specification clause 1301 of MORD specification for Rural roads and as per direction of Engineer-in-Charge.
353.76
1920
-
... More
Providing and laying pitching on slopes/ boulder apron for bed protection, laid over prepared filter media using 30cm and above size black hard granite stone boulder of approved quality from approved quarry as per drawing and technical specification clause 1302 including cost of all materials ,labour,T&P required for the work etc.complete as per specification and direction of the Engineer-in -Charge.
120
1273
-
... More
Providing and laying Filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8 of MORD specification for Rural roads and as per the direction of the Engineer-in-Charge.
109.65
2260
-
... More
Providing and applying two coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescense and applying paint @ 1 litre per 02 Sqm etc. including cost of all materials, labour charges, T&P etc. required for the work complete as per direction of the Engineer-in-Charge.
190.62
60
-
... More
Providing & laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform & free from streaks & holes as per drawing and Technical Specifications of MoRT&H clause 803 and as per direction of Engineer-in-Charge.
1206.72
353
-
... More
Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 of MORD specification for Rural roadsas per direction of the Engineer-in-Charge.
i) 600mm equilateral triangle
30
2090
-
... More
ii) 600mm dia circular
30
2135
-
... More
Supplying and installing of reinforced cement concrete M 15 grade Kilometer stone/ local stone of standard design as per IRC : 8 fixing in position including painting, and printing etc. as per drawing and technical specification clause 1703 of MORD specification for Rural roads and as per direction of Engineer-in-charge.
i) 5th kilometer stone
1
4163
-
... More
ii) Ordinary kilometer stone
8
2489
-
... More
iii) 200 M Stone
30
721
-
... More
Providing & fixing of M-15 grade Guard stone / boundary stone of standard design as per IRC-25 fixed position including finishing and lettering as per drawing and Technical Specifications of MORD specification for Rural roads clause 1704 as per direction of Engineer-in-charge.
350
722
-
... More
Providing and fixing of typical Citizens information board as per MORD specifications and drawing. Three MS Plates of 50 X 5 mm thick, back plate duly welded with 75mm dia steel tubes back on edges as per drawings. The lower & upper plate will be welded with MS flat iron frame of 50mm x 5mm. The steel tubes duly embeded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm below ground level. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 of MoRD Specification for Rural roads including cost,conveyance,royalty, labour and T&P required for the work and as per direction of Engineer-in-charge.
2
13841
-
... More
Providing and fixing of typical informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 of MORD specification for Rural roads and as per direction of Engineer-in-charge.
2
11892
-
... More
Maintenance-
Restoration of Rain-cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh materials in layers not exceeding 250mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawing and technical specifications clause 1902 of MORD specification for Rural roads by manual means and as per direction of Engineer-in -charge.
1st Year
364.91
408
-
... More
2nd Year
485.33
408
-
... More
3rd Year
609.4
408
-
... More
4th Year
729.82
408
-
... More
5th Year
850.24
408
-
... More
Maintenance of Earthen shoulder (filling with fresh selected soil) Making up loss of materials/ irregularities of shoulders to the design levels by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000m as per Technical specification clause 1903 of MORD specification for Rural roads and as per direction of Engineer-in-charge.
1st Year
158.66
50
-
... More
2nd Year
211.02
50
-
... More
3rd Year
264.96
50
-
... More
4th Year
317.32
50
-
... More
5th Year
369.68
50
-
... More
Maintenance of earthen shoulder Stripping of excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawing and technical specification clause 1903 of MORD specification for Rural roads and as per direction of Engineer-in- charge.
1st Year
158.66
20
-
... More
2nd Year
211.02
20
-
... More
3rd Year
264.96
20
-
... More
4th Year
317.32
20
-
... More
5th Year
369.68
20
-
... More
Maintenance of Bituminous surface road i.e. repair to pot holes and removal of loose materials, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat 1904.2 of MORD specification for Rural roads and as per direction of Engineer-in- charge.
1st Year
872.6
313
-
... More
2nd Year
1195.46
313
-
... More
3rd Year
1527.05
313
-
... More
4th Year
1841.19
313
-
... More
5th Year
2164.05
313
-
... More
Maintenance of Hume Pipe culverts by way of clearing , cleaning erosion repair, repair to crack, parapet wall and protection work as per drawing and technical specification clause 1908 of MORD specification for Rural roads and as per direction of Engineer- in- charge.
1st Year
18
1713
-
... More
2nd Year
18
1713
-
... More
3rd Year
18
1713
-
... More
4th Year
18
1713
-
... More
5th Year
18
1713
-
... More
Maintenance of 200 m stones and km stones by way of refixing of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200mtr. and KM. stone and 5 km stone as per drawing and technical specification clause 1912 of MORD specification for Rural roads and as per direction of Engineer-in-charge.
1st Year
7.56
845
-
... More
2nd Year
7.56
845
-
... More
3rd Year
7.56
845
-
... More
4th Year
7.56
845
-
... More
5th Year
7.56
845
-
... More
Cutting of branches of trees from Roadway or with a R.O.W. including disposal of wood and leaves to suitable location as per technical specification clause 1914 of MORD specification for Rural roads and as per direction of Engineer-in-charge.
1st Year
81
176
-
... More
2nd Year
109
176
-
... More
3rd Year
138
176
-
... More
4th Year
162
176
-
... More
5th Year
189
176
-
... More
Cutting of shrubs from roadway orwith in R.O.W. and disposal of shrubs to suitable location as per technical specification clause 1914 of MORD specification for Rural roads and as per direction of Engineer-in- charge.
1st Year
302
10
-
... More
2nd Year
402
10
-
... More
3rd Year
504
10
-
... More
4th Year
604
10
-
... More
5th Year
704
10
-
... More
Trimming of grass and weeds from shoulder ,berms and disposing off the same to suitable location as per technical specification clause 1914 of MORD specification for Rural roads and as per direction of Engineer-in-charge.
1st Year
158.66
3
-
... More
2nd Year
211.02
3
-
... More
3rd Year
264.96
3
-
... More
4th Year
317.32
3
-
... More
5th Year
369.68
3
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements